www.prosoft-technology.com
Tech SupportAsia PacificMalaysia Office Phone: [email protected] spoken: Chinese, English, JapaneseChina OfficePhone: [email protected] spoken: Chinese, English
EuropeFrance Office Phone: +33 (0)[email protected] spoken: French, EnglishMiddle East and Africa Phone: +971.(0)[email protected] spoken: English, Hindi
North America California and Wisconsin Offices Phone: +1 [email protected] spoken: English, Spanish
Latin AmericaBrasil OfficeSupport: [email protected] spoken: Portuguese, EnglishMexico and Central America OfficePhone: [email protected]@prosoft-technology.comLanguages spoken: Spanish, English
4 Start ProSoft Discovery Service
Click the Start button, and then navigate to Programs / ProSoft Technology / ProSoft Discovery Service.
Select the module to configure, and right-click.
Select “Assign Temporary IP”.
Select Assign Temporary IP
5 Connect to the Module’s Web Page
Right-click the module icon and select View module’s webpage. The web page contains the module documentation, sample programs, and configuration tools.
Select Setup Guide and follow screen prompts.
MVI56E-GSCControlLogix PlatformModbus TCP/IP Communication Modules
Quick Start Guide
The MVI56E-GSC Generic ASCII Serial Communication module is configured in RSLogix™ 5000 software using the sample ladder or Add-On Instruction (AOI). The module provides all the documentation from its built-in web server. The product CD-ROM in the box contains two installation programs for ProSoft Discovery Service (PDS) and ProSoft Configuration Builder (PCB).
•PDSisthesoftwareutilityusedtoallowyourPCtoconnecttothemodule’sbuilt-inwebserverandsetatemporaryEthernetIPaddress.Thenyoucanconnecttothemodule’swebpagetoretrievemoduledocumentationorchangethemodule’sfirmwarethoughan Ethernet link.
•PCBisthesoftwareusedtoprovideaccesstothemodule’sdiagnosticmenusandserialcommunication data analyzer features.
MVI56E products are backward compatible with existing MVI56 products, ladder logic, and module configuration files already in use. Easily swap and upgrade products while benefiting from an array of new features designed to improve interoperability and enhance ease of use.
• Web Server: The built-in web server and web page allow access to manuals and other tools previously provided only on a product CD-ROM or from the ProSoft Technology® web site.
•ProSoft Configuration Builder (PCB): New Windows software for diagnostics, connectingviathemodule’sEthernetportorCIPconnect®,toupload/downloadmoduleconfiguration information and access troubleshooting features and functions.
•ProSoft Discovery Service (PDS): Utility software to find and display a list of MVI56E modules on the network and to temporarily change an IP address to connect with a module’swebpage.
•CIPconnect-enabled: Allows PC-to-module configuration and diagnostics from the Ethernet network through a ControlLogix 1756-ENBT EtherNet/IP™ module.
•Personality Card:Anindustrialcompactflashmemorycardstoringthemodule’sEthernet settings, allowing quick and easy replacement.
•LED Scrolling Diagnostic Display: 4-character, alphanumeric display, providing English messages for status and alarm data, and for processor and network communication status.
Start Here
Note: This procedure is for accessing module documents from the built-in web server only. Module configuration is done through ladder logic or Add-On Instruction; so, this procedure is optional for MVI56E-GSC users. Module documentation is also available on the product CD-ROM or from the ProSoft Technology® web site.
Note: If you cannot connect through an Ethernet hub or switch, try a direct connectionbetweenyourPCandthemodule’sE1port.Youcanusethesameprovidedcable.Themodule’sE1portisauto-sensingandwillautomaticallycorrectfor the cable type used (with or without crossover).
Continued on back.
What’s Different
What’s New
Quick StartReplacing or Upgrading an existing MVI56: If you are replacing an MVI56-GSC module, simplyremoveitandinserttheMVI56E-GSCmoduleintothesameslot.Yourexistingladder logic will automatically configure the MVI56E-GSC module. Follow the procedures below to learn how to use the new Ethernet port. The MVI56E-GSC no longer utilizes a serial port for diagnostics or data analyzer access.
First-Time Users:Followtheprocedurebelowtoaccessthemodule’swebpageandcopythe Setup Guide to your PC.
1. Install the Module in the Rack
Insert the MVI56E-GSC into the ControlLogix chassis. Use the same technique recommended by Rockwell Automation® to remove and install ControlLogix modules.
2. Connect your PC to the Module
With the module securely mounted, connect one end of the providedEthernetcabletothemodule’sEthernetport(E1)andtheother end to an Ethernet hub or switch accessible from the same network as you PC.
POWER
MVI56E Module
Logix5500
POWER
Logix5500
3. Install ProSoft Discovery Service
If you want to retrieve documentation from the module rather than from the CD-ROM, you will need to install the ProSoft Discovery Service (PDS) software.
a. Insert the MVI56E Product Support Software CD-ROM into the CD drive of your PC.Wait for the Startup screen to appear.
b. Click the Install ProSoft Discovery Service icon to begin installing the software.