Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
A high speed, lightweight 3,000 pound cable puller
M3KM
MAXIS® 3K CABLE PULLER
LIGHTWEIGHTWeighs 51 lbsNo need to bolt to the ground
HIGH CAPACITY3,000 lbs. pulling force
FAST SETUP AND OPERATIONOne person, 2 Minute set up and operate
Quickly adapts from underground to overhead pulls
HIGH SPEED2 Pulling speeds:
25 fpm on low(at no load) and100 fpm on high
(at no load)
Product Catalogue
Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
A high speed, lightweight 3,000 pound cable puller
M3KM
MAXIS® 3K CABLE PULLER
LIGHTWEIGHTWeighs 51 lbsNo need to bolt to the ground
HIGH CAPACITY3,000 lbs. pulling force
FAST SETUP AND OPERATIONOne person, 2 Minute set up and operate
Quickly adapts from underground to overhead pulls
HIGH SPEED2 Pulling speeds:
25 fpm on low(at no load) and100 fpm on high
(at no load)
Conduit Bending Tools
1-855-SWTOOLS | 1-855-798-6657 | SOUTHWIRETOOLS.COM
BENDMAX™ POWER BENDERPowered bender 3/4″-2″ EMT, IMC, Rigid Conduit
BENDING SERIES
PB2000PROGRAMMABLESPRINGBACKINCORPORATEDINTO DIGITAL READOUT
LARGE ANALOGPROTRACTOR FORACCURATE BENDS
BACKLIT DIGITALDISPLAY
EASILY REPLACEABLEPENDANT CABLE
BENDS IN BOTHTHE VERTICAL ANDHORIZONTAL PLANES
ELEVATION TRAVELINDICATOR
1-855-SWTOOLS | 1-855-798-6657 | SOUTHWIRETOOLS.COM
BENDING SERIES
RB1000BENDstation™ RIGID WORKSTATIONComprehensive conduit bending workstation for 3/4″ & 1″ RIGID & IMC
BUILT-IN PROTRACTORFOR QUICK ANDACCURATE BENDSIncrease bending speed on the job
SAFE AND EFFICIENTMeasuring, bending andcutting at a 36” table height
HIGH CAPACITYStore up to 700 feet of conduit
BUILT-IN RATCHET SYSTEMBending requires up to 40% less forceto bend than other mechanical benders
HIGHLY MOBILEHeavy-duty casters for easy transportation and mobility
MB1000
1-855-SWTOOLS(855-798-6657)
©2014 Southwire Company, LLC. All rights reserved. Registered Trademark and ™Trademark of Southwire Company, LLC.
BENDstation™PRO
Comprehensive conduit bending workstation for 3/4” & 1” EMT
BUILT-IN PROTRACTOR FOR QUICK AND ACCURATE BENDSIncrease bending speed on the job
SAFE AND EFFICIENTMeasuring, bending and cutting at a 36” table height
HIGH CAPACITYStore up to 900 feet of conduit
BUILT IN RATCHET SYSTEM Increases bending force on 1” EMT
HIGHLY MOBILEHeavy duty casters for easy transportation and mobility
Scan code to see more
Southwiretools.com
Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
Removable conduit reaming screwdriver deburs thin wall conduit with speed and ease.
REAMS AND SMOOTHESReams and smooths ID and OD of ½", ¾" and 1" thin-wall conduit to protect wire and permit proper installation of fittings
DUAL FUNCTIONReams inside and outsideof conduit simultaneously
SDCFR
CONDUIT FITTING REAMING SCREWDRIVER
COMFORTABLE GRIPComfortable cushioned grip allows firm grip and greater torque
REMOVABLEReaming head can be removed and used with a power drill
Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
Cut copper, aluminum, brass tubing and galvanized thin wall conduit quickly and cleanly in just a few revolutions.
STURDYZinc alloy construction for long lasting use and durability
SHARPScores and cuts copper, aluminum and brass tubing and EMT conduit
CONCUT
CONDUIT SCORING AND CUTTER
REAMER BLADEFold-away reamer blade for convenience
Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
A conduit layout tool that will pinpoint a center knockout in seconds. The Marksman® Conduit Spacerfeatures a panel schedule showing the branch circuit number and it’s corresponding phase.
EASY TO USE60 times faster than a tape measure
MAXIMUM DURABILITYConstructed from tough, durable,anodized aluminum
FOR KO SIZES1/2" TO 4"
LASER ETCHINGMarkings are laser etchedfor lasting durability
MM01
MARKSMAN® CONDUIT SPACER
Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
A four-in-one conduit tool that works great in any situation and will help in all of your conduit and gear installations.
TORPEDO LEVELThe SpeedSet™ is equipped with magnetic sides for easy leveling. Level your conduit for perfect vertical or horizontal lines.
BENDING TOOLCreate perfect bends
every time
SPACERThe SpeedSet™
is a 1-1/8"spacer
DOG-LEG BENDSUse the SpeedSet™ to help prevent dog-leg bends
SS01
SPEEDSET™ CONDUIT LEVEL
Southwiretools.com
©2015 Southwire Company, LLC. All rights reserved. Trademark of Southwire Company, LLC.
1-855-SWTOOLS(855-798-6657)
®
A high speed, lightweight 3,000 pound cable puller
M3KM
MAXIS® 3K CABLE PULLER
LIGHTWEIGHTWeighs 51 lbsNo need to bolt to the ground
HIGH CAPACITY3,000 lbs. pulling force
FAST SETUP AND OPERATIONOne person, 2 Minute set up and operate
Quickly adapts from underground to overhead pulls
HIGH SPEED2 Pulling speeds:
25 fpm on low(at no load) and100 fpm on high
(at no load)