Transport Dimensions
Working Dimensions
Machine Weight: 33,500kg (73,854lbs)(without by-pass conveyor and magnet options)36,000kg (79,365lbs)(with by-pass conveyor and magnet options)
R
The Terex Finlay J-1160 is a compact and aggressive tracked mobile primary jaw crusher. Incorporating the Terex Jaques JW40 jaw crusher a heavy duty VGF feeder and an integrated prescreen system the Terex Finlay J-1160 gives optimum production in quarrying, mining, demolition and recycling applications.
Its compact size, quick set up times, ease of transport and user friendly operational features make the Finlay J-1160 ideal for all sized operators.
J-1160
14.1m (46’ 3”) 2.6m (8’ 9”)
3.5m
(11’
5”
14.1m (46’ 3”) 5.8m (19’)
**Material is based on Limestone with bulk density 1.6T/m3. Where available optional Pre-screen is used. Maximum capacity uses optimal mesh sizes and material conditions.
Maximum Plant Capacity: Tph** Stph** 350 386
STANDARD FEATURESEngine:Tier 3 / Stage 3A: Caterpillar C9 Acert 224kW (300hp) water cooled
engine
Tier 4i / Stage 3B: Scania DC9 80A 202kW (275hp)
Jaw Chamber:Terex 1000mm x 660mm (40” x 26”) single toggle jaw crusher
Hydrostatic drive and advanced electronic control system
Fully hydraulically adjustable closed side setting
Reversible operation for clearing blockages
S tooth liners - 18% Manganese as Standard
Hopper/Feeder:Hopper Capacity: 5m³ (6.5yd³)
Heavy duty vibrating feeder
Grizzly feeder with integral pre-screen, standard 50mm spacing
Selectable discharge to by-pass conveyor or main conveyor
Mesh aperture on grizzly feeder: 30mm
Main Conveyor:900mm wide main belt fitted with impact bars at feed point
High spec scraper at head drum
Piped for dust supression complete with spraybars
General:Piped for overband magnet
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty undercarriage unit with 400mm wide pads
Handheld track control set with connection lead
Single speed tracks with ‘soft start’
Safety guards in compliance with machinery directive
Emergency stops
Jaw Chamberu Inlet opening: 1000 x 600mm” (40” x 26”)
u Hydrostatic Drive with reverse
feature for clearing blockages
u Full Hydraulic CSS adjustment
Hopper and Feederu Hopper capacity: 5m³ (6.5yd³) u 8m3 (10.4yd3) with optional extensions u Hydraulic folding
By-pass conveyor (option)u Belt width: 650mm (26”)
u Discharge height: 2000mm (6’ 8”)
u 2800mm (9’ 2”) discharge option available
Tracksu Shoe width 400mm (16”) u Sprocket centres: 3280mm (10’ 9”)
u Bolt on tracks
Main Conveyoru Belt: 900mm (36”)
u Discharge height: 3300m (10’ 10”)
Platformsu Powerunit and chamber access
Powerunitu Tier 3 / Stage 3A: Caterpillar C9 Acert 224kW (300hp) u Tier 4i / Stage 3B: Scania DC9 80A 202kW (275hp)
u Hydrostatic transmission
u Electronic control system
u Catwalk access
Magnetu Optional
Chassisu Robust, heavy duty chassis
TM
3.4m
(11
’ 2”)
The robust high performance hydrostatic driven single toggle jaw chamber provides high capacity with large reduction ratio’s.
Automatic variable speed VGF ensures continuous choke feeding of the crushing chamber for optimal productivity.
High powered hydrostatic drive ensures precise chamber controls and reverse functionality for clearing blockages and assisting in demolition and recycling applications.
Fully hydraulic adjustable closed side setting minimises downtime and offers quick adjustment.
u
u
u
u
Features:
Chassisu Robust, heavy duty chassis
Main conveyoru Belt: 1000mm (40”)
u Discharge height: 3100mm (10’ 2”)
u Optional extension extends discharge height to 3915mm (12’ 10”)
incorporates folding head section for transport Powerunitu Tier 3/Stage 3A: Caterpillar C9 261kW (350hp)
u Tier 4i/Stage 3B: Scania DC9 83A 257kW (350hp)
u Hydrostatic transmission
u Electronic control systemMagnet (option)
Jaw chamberu Inlet opening: 1100mm x 700mm (44” x 28”)
u Hydrostatic Drive with reverse
feature for clearing blockages
u Hydraulic assisted CSS adjustment
u Hydraulic release configuration option available
Hopper / Feederu Hopper capacity: 9m³ (11.7yd³)
u Hydraulic folding
u Vibrating grizzly feeder
By-pass conveyor (optional)u Belt: 650mm (26”)
u Standard discharge height: 2900mm (9’ 6”)
Tracksu Shoe width: 500mm (20”)
u Sprocket centres: 3780mm (12’ 6”)
u Bolt on tracks
u 2 speed soft start
Platformsu Powerunit and chamber access
Transport Dimensions
Working Dimensions
Machine weight: 45,300kg (99,600lbs)(with HA chamber, standard VGF, standard
main conveyor, magnet and by-pass conveyor)
Note: Illustrated with optional extended main conveyor, magnet and by-pass conveyor
R
The Terex Finlay J-1170 is a compact and aggressive tracked primary jaw crusher. The heartbeat of the machine is a robust hydrostatically driven Terex jaw chamber which provides high capacity with large reduction ratios. The jaw chamber configuration can be set up specifically for quarrying applications or processing construction demolition debris using the hydraulic release chamber option.
The J-1170 features a heavy duty variable speed VGF and integrated prescreen giving excellent production throughput in quarrying, mining, demolition and recycling applications. Notable options include a variable speed pan feeder along with an independent prescreen system. The J-1170’s 45.3 tonne / 99600lbs transport weight and compact dimensions mean lower transport costs between and within crushing sites.
J-1170
14.2m (46’ 7”)
16.1m (52’ 10”)
2.9m (9’ 6”)
3.4m
(11’
2”)
6.0m (19’ 8”)
4m (1
3’ 2
”)
TM
The robust high performance hydrostatically driven single toggle jaw chamber provides high capacity with large reduction ratios.
Automatic variable speed VGF ensures continuous choke feeding of the crushing chamber for optimal productivity.
High powered hydrostatic drive ensures precise chamber control and reverse functionality for clearing blockages and assisting in demolition and recycling applications.
Hydraulically assisted closed side setting adjustment minimises downtime and offers quick adjustment.
Its compact size, quick set up times, ease of transport and user friendly operational features make the J-1170 ideal for all sized operators.
u
u
u
u
Features:
u
STANDARD FEATURESEngine:Tier 3/Stage 3A: Caterpillar C9 261kW (350hp)
Tier 4i/Stage 3B: Scania DC9 83A 257kW (350hp)- Hydraulic Adjust
Jaw Chamber:Terex 1100mm x 700mm (44” x 28”) single toggle jaw crusher
75mm pre-set closed side setting for quarry applications
Hydrostatic drive and advanced electronic control system
Reversible operation for clearing blockages
S tooth liners - 18% Manganese as Standard
Hopper / Feeder:Hopper capacity: 9.6m³ (11.7yd³)
Hydraulically folding hopper sides
Heavy duty vibrating feeder
Integrated pan feeder - cassette is 75mm spacing as standard
Selectable discharge to by-pass conveyor or main conveyor
Mesh aperture on grizzly feeder: 38mm
Main Conveyor:1000mm (40”) wide main belt fitted with impact bars at feed point - Fixed head, discharge height 3100mm
Hydraulic raise/lower of main conveyor
High spec scraper at head drum
Piped for dust supression complete with spraybars
Separate central operators panel
General:Piped for overband magnet
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty undercarriage unit with 500mm (20”) wide pads
Handheld track control set with connection lead
Two speed tracks with ‘soft start’
Safety guards in compliance with machinery directive
Emergency stops
Working Dimensions
Transport Dimensions
Machine Weight: 51,300kg (113,096lbs)(without by-pass conveyor and magnet options)53,500kg (117,946lbs)(with by-pass conveyor and magnet options)
Jaw Chamberu Inlet opening: 1070mm x 762mm (42” x 30”)
u Hydrostatic Drive with reverse feature for clearing blockages
u Full hydraulic CSS and drawback bar
Hopper and Feederu Hopper capacity: 9m³ (11.7yd³)
u Heavy duty vibrating feeder
with integrated pre-screen
u Hydraulically folding
Main Conveyoru Belt width: 1000mm (40”)
u Discharge height: 3.6m (12’ 0”)
u Discharge option: 4m (13’ 2”) illustrated
u Hydraulic folding for transport
Tracksu Shoe width: 500mm (20”)
u Sprocket centres: 3780mm (12’ 5”)
By-pass conveyor (optional)u Belt width: 650mm (26”)
u Discharge height: 2100mm (6’ 10”)
u 2.9m (9’ 6”) discharge option available
Platformsu Powerunit and chamber access
Powerunitu Tier 3 / Stage 3A: Caterpillar C9 Acert 261kW (350hp)
u Tier 4i / Stage 3B: Scania DC9 83A 257kW (350hp)
u Hydrostatic transmission
u Electronic control system
u Catwalk access
Magnetu Optional
Chassisu Robust, heavy
duty chassis
J-1175
R
The Terex Finlay J-1175 is a high performance tracked mobile jaw crusher. Incorporating the Terex Jaques JW42 jaw crusher and a heavy duty VGF feeder the Finlay J-1175 gives optimum production in a range of applications.
Its compact size, quick set up times, ease of transport and simple maintenance make the Terex Finlay J-1175 ideal for quarrying, mining, demolition and recycling applications.
The robust high performance hydrostatically driven single toggle jaw chamber provides high capacity with large reduction ratio’s.
Automatic variable speed VGF ensures continuous choke feeding of the crushing chamber for optimal productivity.
High powered hydrostatic drive ensures precise chamber controls and reverse functionality for clearing blockages and assisting in demolition and recycling applications.
Fully hydraulic closed side setting minimises downtime and offers quick adjustment.
u
u
u
u
Features:Features:
**Material is based on Limestone with bulk density 1.6T/m3. Where available optional Pre-screen is used. Maximum capacity uses optimal mesh sizes and material conditions.
Maximum Plant Capacity: Tph** Stph** 475 524
STANDARD FEATURESEngine:
Tier 3 / Stage 3A: Caterpillar C9 Acert 261kW (350hp) water cooled
diesel engine
Tier 4i / Stage 3B: Scania DC9 83A 257kW (350hp) water cooled
diesel engine
Jaw Chamber:Terex 1070mm x 762mm (42” x 30”) single toggle jaw crusher
Hydrostatic drive and advanced electronic control system
Fully hydraulically adjustable closed side setting
Reversible operation for clearing blockages
S tooth liners Standard - 18% Manganese as standard
Hopper/Feeder:Hopper capacity: 9m³ (11.7 yd³)
Hydraulically folding hopper sides
Heavy duty vibrating feeder
Integrated pan and feeder - cassette is 75mm spacing as standard
Selectable discharge to by-pass conveyor or main conveyor
Mesh aperture on grizzly feeder: 38mm (1.5”)
Main Conveyor:1000mm wide main belt fitted with impact bars at feed point
High spec scraper at head drum
Piped for dust supression complete with spraybars
General:Piped for overband magnet
Separate central operators panel
Standard toggle setting 590mm
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty undercarriage unit with 500mm wide pads
Hand held track control set with connection lead
Two speed tracks with ‘soft start’
Safety guards in compliance with machinery directive
Emergency stops
Transport Dimensions
3.5m
(11’
6”)
14.5m (47’ 8”)
3.95
m (1
2’ 1
”)
6.2m (20’ 4”)15.7m (51’ 8”)
2.9m (9’ 6” )
TM
Working Dimensions
Machine Weight: 73,000kg (160,934lbs)(without by-pass conveyor and magnet options)76,000kg (167,548lbs)(with by-pass conveyor and magnet options)
Jaw Chamberu Terex® JW55 single toggle Jaw Chamber
u Inlet opening: 1415mm x 820mm (55” x 32”)
u Hydrostatic drive
u Full hydraulic CSS adjust
Hopper and Feederu Hopper capacity: 10m3 (13yd3)u Optional hopper extensions: 12m3 (15.6yd3)
u Hydraulic folding sides with hydraulic locking wedgesu Independent prescreenu Selectable discharge to By-Pass or Main Conveyor
By-pass conveyor (option)u Plain belt: 750mm (30”)
u Discharge height: 3600mm (11’ 10”)
u Universal mounting to left or right side
u Folds hydraulically for transport
Main Conveyoru Belt width: 1400mm (55”)
u Discharge height: 4500mm (14’ 9”)
u High spec scraper at head drum
u Hydraulic folding for transport
u Dust suppression system fitted as standard
Platformsu Powerunit and chamber access
Powerunit/ Control systemu C13 328kW/440hp @ 1800rpm
u Advanced CANBUS electronic control system
u Hydrostatic Drive and Direct Drive
u Catwalk access
MagneticSeparator (optional)u Suspended self-cleaning
crossbelt overband magnet
Chassisu Robust, heavy duty chassis
Undercarriageu Shoe width: 500mm (20”)
u Sprocket centres: 4200mm (13’ 9”)
u Dual speed tracking with soft start
Independent Pre-Screenu Optional for increased fines removal
J-1480
Terex Jaques Jaw with fully hydraulic adjustable closed side setting.
Hydrostatic & Direct drive systems with advanced electronic control system.
10m³ (13yd³) hopper capacity. Optional hopper side extensions are available.
Independent VGF feeder and Pre-Screen.
Selectable discharge to by-pass conveyor or main conveyor.
u
u
R
The Terex Finlay J-1480 incorporates the Terex Jaques JW55 single toggle jaw crusher which boasts a throughput capacity up to 750mtph depending on application and material. The machine is available with the optional direct drive which offers improved fuel efficiency and greater power utilisation or the standard hydrostatic drive which offers reversible operation for clearing blockages and for use in demolition applications. The large 10m³ hopper has hydraulically folding sides and hydraulic wedge clamp system providing faster machine set up time. The machine features a vibrating pan feeder and an aggressive independently driven pre-screen which provides optimum separation of dirt, fines and difficult materials.
u
u
u
3.8m
(12
’ 8”)
18m (59’4”) 3.38m (11’1”)
4.6m
(15’
3”)
6.7m (22’0”)20.7m (67’ 11”)
**Material is based on Limestone with bulk density 1.6T/m3. Where available optional Pre-screen is used. Maximum capacity uses optimal mesh sizes and material conditions.
Maximum Plant Capacity: Tph** Stph** 750 827
Transport Dimensions
Features:
STANDARD FEATURESEngine:
Caterpillar C13 328kW (440hp) water cooled diesel engine
(Engines are available to meet both US EPA emission
standards, under CFR 1039.625 and EU flexibility provisions
of Directive 97/68/EC)
Jaw Chamber:Terex 1415mm x 820mm (55” x 32”) single toggle jaw crusher
Hydrostatic drive and advanced electronic control system
Fully hydraulically adjustable closed side setting
Reversible operation for clearing blockages
S tooth liners - 18% Manganese as Standard
Hopper/Feeder:Hopper capacity: 10m³ (13yd³)
Heavy duty vibrating Pan & independent Pre-screen (75mm
Standard spacing)
Selectable discharge to by-pass conveyor or main conveyor
Mesh aperture on grizzly feeder: 38mm
Main Conveyor:Width: 1400mm wide main belt fitted with impact bars at feed point
High spec scraper at head drum
Piped for dust suppression complete with spray bars
GeneralStockpile Sensor (main conveyor)
Piped for overband magnet
Separate central operator’s panel
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty undercarriage unit with 500mm wide pads
Handheld track control set with connection lead
Two speed tracks with ‘soft start’
Safety Guards in compliance with machinery directive
Emergency stops
Electric refueling pump
TM
At Terex® Finlay our commitment to you extends far beyond the initial sale. Terex® Finlay dealers are committed to supporting every aspect of your operation, from commissioning & servicing equipment. They’re there to help you improve productivity and lower operating costs throughout the working life of your machine.
CUSTOMER FIRST ALWAYS
SERVICE & SUPPORT TRAINING
Terex® Finlay offers operator & service training opportunities and tools. We value your time and your bottom line. Our courses are designed to deliver concise, comprehensive training to support both.
WARRANTY
We build long-lasting quality into each of our products and are proud to offer outstanding warranty coverage as our commitment to you. Subject to our sales terms and conditions all new Terex® Finlay products carry a12 month warranty.
PARTS
Your local Terex® Finlay dealer aims to keep you moving 24 hours a day, 7 days a week, 365 days a year. Whether you need jaw liners, meshes or replacement components, only genuine Terex® Finlay parts guarantee the safety, proper functioning and reliability of your equipment. Terex® Finlay supplies quality original parts to protect your investment and our knowledgeable product specialists help ensure you receive exactly what you need to get your equipment back on the job quickly & cost effectively.
R
www.terexfinlay.com
Effective January 2013. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex GB Ltd. makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2010 Terex GB Ltd.
TM
Follow us on: