R-Tech®

Fanfold Roof Underlayment

The Best Choice for Single-Ply Re-Cover Applications Versatile Easy-to-Install Environmentally Sustainable Cost Effective

Insulfoam • 6004 N. Westgate Blvd. Ste 120 • Tacoma, WA 98406 Phone: (253) 572-5111 • Toll Free: (800) 248-5995 • www.insulfoam.com

InsulFoam and R-Tech are trademarks of Insulfoam. ENERGY STAR is a registered trademark owned by the US government. LEED is a trademark of the U.S. Green Building Council. © 2010 Carlisle. 604253 R-Tech Fanfold Roof Underlayment Sell Sheet 06/10.

Versatile

Environmentally Sustainable Cost Effective

Easy-to-InstallAdvanced factory-laminated polymeric facers allow

TPO, EPDM and PVC membranes to be installed directly over the R-Tech, eliminating compatibility concerns and the need for additional slipsheets

Unique fanfold design enables the insulation to lay fl at, eliminating the seam-welding issues typically associated with other fanfold products

Enhanced resilience and fl exibility allow application over a variety of irregular substrates and virtually eliminate the breakage typically encountered with other less fl exible re-cover materials

Available in a variety of sizes, thicknesses and densities:

– 3/8", 1/2" and 3/4" thicknesses

– Provided in accordion-style bundles of up to two squares

– Wide range of densities up to 2.0 pcf

Contains no dyes, formaldehyde or ozone-depleting HCFCs

Manufactured using post-consumer and post- industrial materials

ENERGY STAR® qualifi ed

Can contribute toward LEED® credit requirements

Does not leach toxic chemicals or heavy metals

Does not support mold or mildew growth

A 100% recyclable foam core

Long-term thermal performance conserves energy

Regional manufacturing reduces the environmental impact of transportation to jobsites

Less expensive than virtually every re-cover board

Reduces re-cover board material costs by 25-50% when compared to wood fi ber and gypsum-based products

Reduces insulation labor costs by more than 50%

If necessary, it’s possible to carry R-Tech up a ladder, providing additional fl exibility in scheduling and material handling

Lightweight and compact

– Available in 200-square-foot bundles, packaged in approximate 1' x 2' x 4' dimensions

– Two squares of ½" R-Tech weigh less than 12 lbs.

– Typical mechanic can carry two bundles (four squares) of R-Tech, equivalent to more than 12 sheets and 190 lbs. of traditional cover board

Requires fewer fasteners per square foot than most roofi ng insulations

Fanfold design makes it easy to get more material onto the rooftop and fully installed in less time

As the largest manufacturer of block-molded expanded polystyrene (EPS) in North America, Insulfoam consistently provides innovative solutions for the construction industry. With R-Tech Fanfold Roof Underlayment, Insulfoam continues to advance the construction industry by providing high-quality, dependable and long-lasting products that offer unmatched performance. For more information on the products and services offered by Insulfoam, call 800.248.5995 or visit www.insulfoam.com.