+ All Categories
Home > Documents > RADAR LOVE - s3-us-west-2.amazonaws.com · RADAR LOVE 1 How Non-Contact Sensors are Transforming...

RADAR LOVE - s3-us-west-2.amazonaws.com · RADAR LOVE 1 How Non-Contact Sensors are Transforming...

Date post: 11-Jun-2020
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
37
RADAR LOVE 1 How Non-Contact Sensors are Transforming the Grain Industry
Transcript

RADAR LOVE

1

How Non-Contact Sensors

are Transforming

the Grain Industry

NCR-80 VIDEO

2

COMPARISON VERSUS 26 GHZ

Overcomes issues associated with other frequencies

80 GHz versus Lower Frequencies

• Level measured

• Volume calculated

• Narrow or corrugated silos

• Focused beam avoids structure

• High dust applications

• Close tracking during fill

• Optional digital output

• No horn

3

High frequency 80 Ghz

Radar provides continuous

single-point target level

measurement.

80 GHz Radar

Radar

FEATURES

Reliable level measurement with 80 GHz of power • Non-contact sensor

• Continuous level measurement up to 393 ft.

• Narrow 4° beam angle for precise targeting

• Reliable level accuracy within 0.2 inches

• Hazardous location approvals

• Dusty, moist, or noisy environments

• Push button setup & configuration or utility software

4

MATERIALS

Grain & Milling• Corn

• Beans

• Wheat

• Flour

• Fertilizer

5

MODELS

Metal-jacketed lens • Various mounting options

• Stainless steel flange

• 4 inch

• 6 inch

• 8 inch

• Maximum 10° swivel

• Mounting plates

• 0, 10, 30 and 45 degrees

6

10°

30-DEGREE MOUNTING ASSEMBLY

7

0-DEGREE MOUNTING PLATE

8

SWIVEL ADAPTER FLANGE

9

NO HORN

METAL JACKETED LENS INSTALL

GRAINS

DDG

MODELS

14

1-1/2’ NPT threaded ➢Distances up to 80 feet

➢Simple installation in existing opening

➢Class II now available

➢8° swivel mounting option

1-1/2” NPT SWIVEL MOUNTING OPTION

8° directional aiming ➢Self-aligning carbon steel flange

➢1.5 inch nylon ball and socket

➢For tanks with radius dome or angled roof

➢Provides precise, easy aiming flexibility

➢Based on 7-inch bolt pattern

15

1-1/2” INSTALL

MODELS

17

Plastic horn ➢More economical than SS flange

➢Distances up to 393 feet

➢Class I and II approvals available

➢Angled boot

PLASTIC HORN MOUNTING OPTIONS

Flexible options ➢ Mounting straps

▪ 6.7 inch

▪ 11.8 inch

▪ Allows for hanging in open top hoppers

➢ Mounting flanges

▪ 3 inch

▪ 4 inch

▪ 6 inch

▪ 8 inch

18

PLASTIC HORN INSTALL

BINDISC

Fast and simple setup

BinDisc Interface

• Push-button sensor setup and configuration

• Integrated into the sensor housing

• Installed and visible under a windowed housing cover

• Aids in on-site system diagnosis

• One BinDisc can be used to setup multiple sensors

20

BinDisc

USING BINDISC FOR SETUP

BINDISC DISPLAY

DIRECTIONAL AIMING

SOCKET LENGTH GUIDELINES

3”

4”

6”

7.8”

11.8”

19.6”

2-WIRE LOOP POWERED 4-20/HART TO PLC

For NCR-80 or GWR-2000

25

4-WIRE 4-20/HART TO PLC

For NCR-80 or GWR-2000

26

MODBUS RTU DIRECT TO PLC/SCADA SYSTEM

For NCR-80 or GWR-2000

27

* 24 VDC input power

MODBUS COMMUNICATION WITH BINVENTORY

For NCR-80 or GWR-2000

28

MODBUS TO PANEL METERS AND BINVENTORY

For NCR-80 or GWR-2000

29

* 24 VDC input power

MODBUS OVER TCP/IP TO BINVENTORY

For NCR-80 or GWR-2000

30

BINVENTORY

Formerly known as eBob

➢Version 5.4

➢Works with:

▪ SmartBob

▪ SmartSonics

▪ 3D

▪ NCR-80

▪ GWR-2000

▪ SPL-100

31

AVERAGING FEATURE

Average level for multiple sensors

32

➢Up to 32 sensors on a single vessel

➢Binventory averages the results

➢Weighted average function

▪ Specify a weight as a percent for each sensor adding up to 100%

➢Arithmetic mean

▪ Selecting Distribute Weight button will balance or weight all sensors equally

DIGITAL PANEL METERS

Compatible with sensors using the Modbus protocol

Modbus-Compatible Displays

• Three modes of operation – master, slave, and snooper

• Customizable upper and lower large, easy-to-read red LED displays

• Accommodates up to 16 process variables in a variety of math functions

• Automatically scans at set intervals or scan manually

• Rugged front panel design stands up to weather and high impact

• Advanced linearization capability compensates for vessel shape and submerged structures

33

DPM-100

ANALOG DISPLAY MODULES

At-a-glance display with relay options

Bar Graph Display

• Housed in an enclosure or panel mounted

• Option of 31 or 51-segmented vertical or horizontal display

• Green or red LED

• Loop 4-20 mA input

• Wide range power supply 86-265 VAC / 95-300 VDC

• Wall-mounted enclosures to hold multiple units are available

34

THANK YOU

Scott Bonine +1 402 434 9117

[email protected]

www.binmaster.com


Recommended