Radial Press Jointing

107

122

110

121

109

123

124

126

128

142

143

143

Manual radial press

Pressing tongs Mini

Cropping tongs Mini

Cordless radial press Mini

Electro-hydraulic radial presses

Cordless radial presses

Pressing tongs / pressing rings

Hold-Harmless and Indemnification Agreement

Electric radial press

Cropping tongs

Cable shears

Radial Press Jointing

2.4 million!REMS will have produced more than 2.4 million pressing tongs by the end of 2012. This success confirms the leading role of REMS in press-jointing technology.

109

with automatic circuit control and charging status check

< 34 cm

REMS Mini-Press ACC Cordless radial press with automatic circuit control

German Quality Product

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation.Pipe pressing joints Ø 10 – 40 mmComplete range of REMS pressing tongs Mini for all common pressfitting systems, see page 110 – 120.

REMS Mini-Press ACC Li-Ion – universal up to Ø 40 mm. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of the pressing tongs. Pressing tongs for all common systemsComplete assortment of REMS pressing tongs Mini for all common pressfitting systems (page 110 – 120). High-compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond to the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Very compact design and low weight of the REMS Mini pressing tongs due to special arrangement of the pressing tongs connection (Patent EP 1 952 948).DesignSuper light, super small, super handy. Drive unit with battery only 2.4 kg. Drive unit with pressing tongs under 34 cm. Works anywhere, free-hand, overhead, also in particularly tight areas. Optimum weight distribution for single-hand operation. Ergonomically designed housing. Swivelling pressing tongs seat. Secure seating of pressing tongs by automatic locking. For battery and corded operation. Electronic charging status check with flat battery protection and charging status indicator with 2-coloured LED

Pressing operation by touch-control with ACCFor reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control).

DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 14,4 V, 420 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.

Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 1.6 or 3.2 Ah capacity for long service life. Powerful and light. Li-Ion 14.4 V, 3.2 Ah battery for approx. 330 pressings Viega Profipress DN 15 per battery charge. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V voltage supply for mains operation instead of Li-Ion battery 14.4 V, as accessory.

Supply formatREMS Mini-Press ACC Li-Ion Basic-Pack. Cordless radial press with automatic circuit control for producing pipe pressing joints Ø 10–40 mm. For operating with REMS pressing tongs Mini. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 14,4 V, 420 W, obust planetary gear, eccentric reciprocating pump and compact high power hydraulic system, Safety tip switch. Battery Li-Ion 14,4 V, 1,6 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 65 W. In sturdy steel case.

Art.-No.578012

Other voltages on request.

Accessories

Description Art.-No.REMS pressing tongs Mini see page 110 – 120.REMS cropping tongs Mini for threaded rods see page 121.REMS Mini-Press ACC Li-Ion drive unit, without battery 578001Battery Li-Ion 14.4 V, 1.6 Ah 571545Battery Li-Ion 14.4 V, 3.2 Ah 571555Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560Voltage supply Li-Ion 230 V for mains operation instead of battery Li-Ion 14.4 V. 571565Steel case with inlay 578290REMS cordless LED lamp see page 89 175200

Patent EP 1 952 948

ZVSHK

110

REMS pressing tongs Mini Accessories for REMS Mini-Press ACC

for all common pressfitting systems Pressing contours

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangement of the pressing tongs connection (Patent EP 1 952 948).High-compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manu-factured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/ manufacturer.

Select pressing tongs Mini yourself!Search for the required pressfitting system in the opposite table and select the correct pressing tongs size. Please note that pressfitting systems for gas installation may only be pressed with the Mini pressing tongs which are highlighted in yellow in the table.

Traceability according to EN 1775:2007REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process. With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.


B

ACz

HE

F

G

H

HA

KI

K

M

MT

RFz

RN

SA

TH

U

UP

US

V

VX

VAU

VUS

VIC

VP

Patent EP 1 952 948

Hold-Harmless and Indemnification AgreementSee page 142.

Confirmation of suitability See page 141.

Example REMS pressing tongs Mini V: ”V” imprint on pressed fitting for traceability according to EN 1775:2007

111


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.AC-FIX PRESS H 12 578396(Global Piping H 16 578400Systems) H 20 578406

H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382VX 16 578552VX 20 578554

AC-FIX H 16 578400PRESS-MULTI H 18 578404(Global Piping H 20 578406Systems) H 25 578408

H 32 578412RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

ACOME MT ACz 12 578608ACz 16 578610ACz 20 578612ACz 25 578614

AHLSELL M 12 578310A-press M 15 578312elförzinkad M 18 578314

M 22 578316M 28 578318

AHLSELL V 12 578324A-press koppar V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604

AHLSELL M 15 578312A-press rostfritt M 18 578314

M 22 578316M 28 578318

AIRBEL M 12 578310PRESSCLIM M 15 578312

M 18 578314M 22 578316M 28 578318

AIRBEL M 12 578310SERTINOX M 15 578312

M 18 578314M 22 578316M 28 578318

Albion Valves M 15 578312DZR Brass M 18 578314

M 22 578316M 28 578318M 35 578390

ALB TH 16 578352Sistema Multicapa TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378C 26 578392U 32 578382

APE Raccordi TH 16 578352a pressare TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364U 40 578386

ASTM F 1807 US ⅜” 578534(Fittings with US ½” 578536Copper Crimp US ¾” 578538Ring for PEX US 1” 578540tubing)Bampi BALPEX TH 14 578348(serie MP) TH 16 578352

TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Bampi BALPEX TH 16 578352Gas TH 20 578358

TH 26 578362BARBI RFz 12 578490EASYPRESS RFz 16 578492(Industrial Blansol) RFz 20 578494

RFz 25 578496RFz 32 578498H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412

BARBI RFz 12 578490MULTIPEX RFz 16 578492(Industrial Blansol) RFz 20 578494

RFz 25 578496RFz 32 578498H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412

BEGETUBE/ B 14 578466IVAR B 16 578468

B 18 578470B 20 578472B 26 578474B 32 578476

BRASELI RFz 16 578492Pressfitting PE-X RFz 20 578494

RFz 25 578496RFz 32 578498

BRASELI U 16 578374Pressfitting U 18 578376Multicapa U 20 578378

U 25 578380U 32 578382U 40 578386

Brass Form H 16 578400Press Form H 18 578404Pex H 20 578406

TH 16 578352TH 18 578356TH 20 578358U 16 578374U 18 578376U 20 578378

Brass Form H 16 578400Press Form H 18 578404Pex-Al-Pex H 20 578406

TH 16 578352TH 18 578356TH 20 578358U 16 578374U 18 578376U 20 578378

Brass & Fittings RFz 16 578492RETI-PRESS ACz 20 578612

RFz 25 578496RFz 32 578498

BRASSTECH H 16 578400MULTItermoSAN H 18 578404Brasspress H 20 578406

H 26 578410TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 18 578376U 20 578378

BUCCHI tech MP TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364

Business Key M 15 578312MT-PRESS M 18 578314(inox) M 22 578316

M 28 578318M 35 578390

CHIBRO M 12 578310pressfitting M 15 578312acciaio al carbonio M 18 578314

M 22 578316M 28 578318

CHIBRO M 15 578312pressfitting M 18 578314inox M 22 578316

M 28 578318CHIBRO M 15 578312pressfitting M 18 578314inox gas M 22 578316

M 28 578318chronimo SA 15 578514SANHA-NiroSan- SA 18 578518Presssystem SA 22 578520

SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604

CIMBERIO SpA SA 15 578514Cim 220 SA 18 578518

SA 22 578520SA 28 578522M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604

CIMBERIO SpA VUS ½” 578566Cim 1220.1 VUS ¾” 578568

VUS 1” 578570VUS 1¼” 578606

CIMBERIO SpA SA 15 578514Cim 220G SA 18 578518

SA 22 578520SA 28 578522M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604

CIMBERIO SpA SA 15 578514Cim 1220M SA 22 578520

SA 28 578522M 15 578312M 22 578316M 28 578318M 35 578390

CIMBERIO SpA SA 15 578514CIM 1220V SA 22 578520

SA 28 578522V 15 578328V 22 578334V 28 578336V 35 578604

Climatek TH 14 578348Clima Therm TH 16 578352 TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364

Pressfitting systems for gas installations must only be pressed with REMS pressing tongs Mini which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation ”108” (1st quarter of 2008), ”208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.The suitability of REMS pressing tools for pressfitting systems: Date 07.03.2013. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue. Pressing tongs for additional pressfitting systems on request.

112


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.ClouSet Press TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362

Comap V 12 578324Sudopress Cu V 14 578326Visu-Control V 15 578328

V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

Comap V 12 578324Sudopress Cu V 14 578326Visu-Control V 15 578328Gas V 16 578330

V 18 578332V 22 578334V 28 578336V 35 578604

Comap V 12 578324Sudopress Cu V 14 578326Visu-Control V 15 578328Solar V 16 578330

V 18 578332V 22 578334V 28 578336V 35 578604

Comap RFz 12 578490PEXPress RFz 16 578492

RFz 20 578494RFz 25 578496

Comap TH 14 578348SKINPress TH 16 578352Visu-Control TH 18 578356

TH 20 578358TH 26 578362THL 32 578368TH 40 578624

Comap TH 16 578352SKINPress TH 18 578356Visu-Control Gas TH 20 578358

TH 26 578362THL 32 578368

COMISA TH 14 578348Press System TH 16 578352

TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412B 14 578466B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

COMISA TH 16 578352Press System Gas TH 20 578358

TH 26 578362TH 32 578364

CONEL F 16 578456CONNECT F 20 578460MULTI F 26 578462

F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352

TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

(NW 26) U 25 578380U 32 578382

Dalpex TH 14 578348Laser Multi TH 16 578352Dalpex TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Danfoss U 16 578374SpeedUp U 20 578378FH Composite ALDanfoss U 16 578374Basic U 20 578378FH Composite AL

DIWAflex systems TH 14 578348 TH 16 578352

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

DUOFIL U 16 578374MKSYSTEM U 18 578376

U 20 578378U 25 578380U 32 578382

DW Verbundrohr U 16 578374multitubo systems U 18 578376

U 20 578378U 25 578380U 32 578382

EBRILLE U 16 578374Isomonflex U 18 578376

U 20 578378U 25 578380H 26 578410TH 26 578362U 32 578382

EBRILLE U 14 578372Monflex U 16 578374

U 18 578376U 20 578378U 25 578380H 26 578410TH 26 578362U 32 578382U 40 578386

EFFEBI M 15 578312PRESSTIGE M 18 578314

M 22 578316M 28 578318V 15 578328V 18 578332V 22 578334V 28 578336

EFFEBI TOF TH 16 578352MULTIPINZA TH 18 578356

TH 20 578358TH 26 578362TH 32 578364F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

egeda Comisa TH 16 578352 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

egeda Baronio V 12 578324V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604

Elkhart VUS ½” 578566APOLLOXPRESS VUS ¾” 578568Fittings Copper VUS 1” 578570and Low-Lead VUS 1¼” 578606BrassEMMETI B 16 578468GERPEX- B 20 578472FIVPRESS B 26 578474

B 32 578476F 16 578456F 20 578460H 16 578400H 20 578406TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378

EMPUR TH 14 578348 TH 15 578350

TH 16 578352TH 17 578354TH 20 578358TH 25 578360

EUROTUBI M 12 578310Europa C-STAHL M 15 578312PRESSFITTING M 18 578314SISTEM1) M 22 578316

M 28 578318EUROTUBI M 15 578312Europa INOX M 18 578314PRESSFITTING M 22 578316SISTEM1) M 28 578318FAR Rubinetterie TH 14 578348PRESSFAR TH 16 578352

TH 17 578354 TH 18 578356 TH 20 578358

TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

F.B.Q. BARONIO V 12 578324BQ press V 14 578326

V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

F.B.Q. BARONIO V 15 578328BQ press V 18 578332carbon steel V 22 578334

V 28 578336V 35 578604

F.B.Q. BARONIO V 15 578328BQ press gas V 18 578332

V 22 578334V 28 578336V 35 578604

FELSINEA TECH TH 14 578348Felsineapress TH 16 578352 TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Fercofloor RFz 16 578492DUO Press RFz 20 578494FERCO PEX RFz 25 578496

RFz 32 578498Fercofloor RFz 16 578492DUO Press RFz 20 578494MULTIFER RFz 25 578496

RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

FILTUBE M 15 578312Instalpress M 18 578314Carbon Steel M 22 578316

M 28 578318M 35 578390

FILTUBE M 15 578312Instalpress M 18 578314Copper M 22 578316

M 28 578318M 35 578390

FILTUBE M 15 578312Instalpress M 18 578314Inox M 22 578316

M 28 578318M 35 578390

Fimisol H 14 578398HAKAPRESS H 16 578400

H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412

113


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Fittings Estándar RFz 16 578492ECO-PRESS RFz 20 578494

RFz 25 578496RFz 32 578498

Fittings Estándar RFz 16 578492MULTICAPA RFz 20 578494

RFz 25 578496RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

Fittings Estándar RFz 16 578492PE-X RFz 20 578494

RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382

FOHS TH 16 578352HEIZTECHNIK TH 20 578358FOHSPRESS TH 26 578362

TH 32 578364FORNARA B 16 578468ForPress B 20 578472

B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382

FRABO V 12 578324FRABOPRESS V 15 578328RAME (Cu) V 18 578332

V 22 578334V 28 578336V 35 578604


V 22 578334V 28 578336V 35 578604

FRABO V 12 578324FRABOPRESS V 15 578328INOX 316 V 18 578332

V 22 578334V 28 578336V 35 578604

FRABO V 15 578328FRABOPRESS V 18 578332C-STEEL V 22 578334

V 28 578336V 35 578604

FRABO V 15 578328FRABOPRESS V 18 578332C-STEEL GAS V 22 578334

V 28 578336V 35 578604

FRABO TH 16 578352FRABOPRESS TH 20 578358MULTI-BRASS TH 26 578362(MB) TH 32 578364

U 16 578374U 20 578378

FRABO H 16 578400FRABOPRESS H 20 578406MULTI-PLUS U 16 578374(MP) U 20 578378FRABO V 15 578328SOLARPRESS V 18 578332

V 22 578334V 28 578336

Fränkische B 16 578468alpex-duo B 18 578470

B 20 578472B 26 578474B 32 578476F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364

Fränkische F 16 578456alpex F50 PROFI F 20 578460

F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352

TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

(NW 26) U 25 578380U 32 578382

Fränkische F 20 578460alpex-Gas F 26 578462

F 32 578464FRIATHERM uni H 16 578400

H 20 578406H 26 578410H 32 578412

gabotherm H+S TH 10 578342TH 12 578346TH 14 578348TH 15 578350TH 16 578352

TH 17 578354TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624

GAROS TH 14 578348TH 16 578352TH 20 578358TH 26 578362TH 32 578364

Geberit Mapress M 12 578310C-STAHL M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

Geberit Mapress M 12 578310EDELSTAHL M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

Geberit Mapress M 15 578312EDELSTAHL Gas M 18 578314

M 22 578316M 28 578318M 35 578390

Geberit Mapress M 12 578310KUPFER M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

Geberit Mapress M 15 578312KUPFER Gas M 18 578314

M 22 578316M 28 578318M 35 578390

Geberit Mepla G 16 578444G 20 578446G 26 578448G 32 578450G 40 578452

General Fittings TH 16 578352Serie 5S00 TH 18 578356

TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 16 578400H 18 578404H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 32 578382U 40 578386

Giacomini H 16 578400Raccordi RM H 20 578406Giacomini H 26 578410

H 32 578412TH 16 578352TH 20 578358TH 26 578362THL 32 578368U 16 578374U 20 578378U 32 578382U 40 578386

Giacomini V 15 578328Valvole Giacomini V 18 578332serie R850V V 22 578334

V 28 578336V 35 578604SA 15 578514SA 18 578518SA 22 578520SA 28 578522M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390

Ginde Press U 16 578374Fitting for Ginde U 20 578378Multi-layer Pipe U 25 578380System U 32 578382Global Plastic TH 16 578352Rothapress TH 18 578356

TH 20 578358TH 25 578360TH 32 578364TH 40 578624

GLOBAL U 16 578374TRADE U 20 578378aqualpress U 25 578380system U 32 578382Golan Pipe U 16 578374Systems U 20 578378(Scandinavia) U 25 578380Alu-Pres U 32 578382GS TH 14 578348Wärmesysteme TH 16 578352System TH TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

GS V 15 578328Wärmesysteme V 18 578332System V V 22 578334

V 28 578336V 35 578604

GSP Group TH 16 578352USMetrix TH 20 578358HAGOS TH 16 578352HakaGerodur TH 16 578352HAKASAN TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Harden 2000 TH 14 578348Poly-Pex 2000 TH 16 578352

TH 17 578354TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624


114


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Harden 2000 TH 16 578352Poly-Pex Gas TH 20 578358

TH 26 578362THL 32 578368

Harden 2000 TH 14 578348Plastic-Press TH 16 578352

TH 18 578356TH 20 578358TH 26 578362

HASTINIK M 15 578312Chibro M 18 578314Pressfitting M 22 578316

M 28 578318M 35 578390

heima-press TH 16 578352 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

HELIROMA U 16 578374klimapress U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

HELIROMA RFz 16 578492romapress RFz 20 578494

RFz 25 578496RFz 32 578498

Henco TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362

Henco Gas TH 16 578352TH 20 578358TH 26 578362

herotec TH 14 578348Tempuss-press TH 16 578352

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

herotec H 16 578400Tempuss-press H 20 578406Plus H 25 578408

H 32 578412MT 20 578560MT 25 578562MT 32 578564RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498TH 16 578352TH 20 578358TH 25 578360TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386

Herz pipefix TH 10 578342TH 14 578348

TH 15 578350 TH 16 578352 TH 17 578354 TH 18 578356 TH 20 578358

TH 25 578360TH 26 578362TH 32 578364TH 40 578624

HITEC Sistema TH 14 578348Multistrato TH 16 578352

TH 18 578356TH 20 578358TH 26 578362TH 32 578364

Hydro-Air US ⅜” 578534Systems US ½” 578536Hydro-Plumb US ¾” 578538Plus PEX US 1” 578540Hydro-Air U 16 (½”) 578374Systems U 20 (⅝”) 578378Hydro-Flex U 25 (¾”) 578380PEX-AL-PEX U 32 (1“) 578382

IBP >B< Flex U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

IBP >B< Press V 12 578324V 14 578326V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

IBP >B< Press V 12 578324Carbon V 14 578326

V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

IBP >B< Press V 15 578328Gas V 18 578332

V 22 578334V 28 578336V 35 578604

IBP >B< Press V 15 578328Inox V 18 578332

V 22 578334V 28 578336V 35 578604

IBP >B< Press V 15 578328Solar V 18 578332

V 22 578334V 28 578336V 35 578604

Idrosanitaria TH 16 578352Bonomi TH 20 578358Homegas TH 26 578362Idrosanitaria TH 16 578352Bonomi TH 18 578356Idropress TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

IDROSISTEMI TH 16 578352Ta-Press TH 20 578358

TH 26 578362TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

IPA IPANA-Press TH 10 578342 TH 11,6 578344

TH 12 578346TH 14 578348

TH 15 578350 TH 16 578352 TH 17 578354 TH 18 578356 TH 20 578358

TH 22 578588TH 25 578360TH 26 578362TH 28 578590TH 32 578364TH 40 578624

IPALPEX TH 14 578348(Industrie du TH 16 578352Plastique et TH 18 578356Accessoires) TH 20 578358

TH 26 578362THL 32 578368TH 40 578624

IPLEX K16/P18 578592PIPELINESAUSTRALIAIplex Pro-fitIPLEX K16/P18 578592PIPELINES K/20 578594AUSTRALIA K/25 578596Iplex K1 K1/32 578598(Gas) K1/40 578600IPLEX K16/P18 578592PIPELINES K/20 578594AUSTRALIA K/25 578596Iplex K2ISOTUBI M 15 578312NUMEPRESS M 18 578314

M 22 578316M 28 578318M 35 578390

IVAR B 20 578472ALPEX-GAS B 26 578474

B 32 578476IVAR B 14 578466Ivar-Press B 16 578468

B 18 578470B 20 578472B 26 578474B 32 578476

IVAR TH 16 578352MULTI PRESS TH 20 578358GAS TH 26 578362

TH 32 578364IVAR TH 16 578352Multi Press MP TH 18 578356 TH 20 578358

TH 25 578360TH 26 578362TH 32 578364TH 40 578624F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464H 16 578400H 18 578404H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

IVAR TH 16 578352Plastic Multi Press TH 20 578358PMP TH 25 578360

TH 26 578362TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 20 578378U 25 578380C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

Jäger H 14 578398aquapress H H 16 578400

H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412U 40 578386

115


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Jäger M 15 578312Niropress Typ M M 18 578314

M 22 578316M 28 578318M 35 578390

Jaraflex- TH 14 578348Presssystem TH 16 578352 TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

KAN U 16 578374KAN-therm U 20 578378

U 25 578380C 26 578392U 32 578382U 40 578386

KAN TH 14 578348KAN-therm LBP TH 16 578352

TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386

KAN M 15 578312KAN-therm M 181) 578314Inox M 22 578316

M 281) 578318KAN M 15 578312KAN-therm M 181) 578314Steel M 22 578316

M 281) 578318KE KELIT U 16 578374KELIT KELOX U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

KE KELIT M 15 578312steelFIX M 18 578314C-Stahl M 22 578316

M 28 578318M 35 578390

KE KELIT M 15 578312steelFIX M 18 578314Edelstahl M 22 578316

M 28 578318M 35 578390

KISAN KI 16 578524Kisan KI 20 578526Development (KD) KI 25 578528

TH 16 578352TH 20 578358TH 25 578360

KISAN KI 16 578524Kisan WL KI 20 578526

KI 25 578528KI 32 578530TH 16 578352TH 20 578358TH 25 578360

KISAN KI 16 578524Kisan WM KI 20 578526

KI 25 578528KI 32 578530

KISAN KI 16 578524Kisan WT KI 20 578526KISAN M 15 578312Kistal C M 18 578314

M 22 578316M 28 578318

KISAN M 15 578312Kistal Inox M 18 578314

M 22 578316M 28 578318

KME Q-tec TH 14 578348TH 16 578352TH 20 578358TH 26 578362

KLIMAT TH 16 578352Effetto Radiante TH 20 578358

TH 26 578362TH 32 578364TH 40 578624F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386B 16 578468B 20 578472B 26 578474B 32 578476

Largo- TH 12 578346Presssystem TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364

LECHAR TH 16 578352ALCOBRAPEX TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

LECHAR U 16 578374COBRAPEX U 20 578378

U 25 578380U 32 578382

LEGEND-PRESS VUS ½” 578566press fitting VUS ¾” 578568system VUS 1” 578570

VUS 1¼” 578606LK Systems V 12 578324LK >B<Press V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604

LK Systems V 12 578324LK >B<Press V 15 578328Elförzinkat V 18 578332

V 22 578334V 28 578336V 35 578604

LK Systems V 15 578328LK >B<Press V 18 578332Gas V 22 578334

V 28 578336V 35 578604

LK Systems TH 16 578352LK Universal TH 20 578358

TH 25 578360TH 32 578364TH 40 578624

Mair Heiztechnik M 12 578310Gomafix Cu/E1) M 15 578312

M 18 578314M 22 578316

Mair Heiztechnik H 11,5 578394Gomafix M H 14 578398

H 16 578400H 20 578406

Mair Heiztechnik H 11,5 578394M-Press H 14 578398

H 16 578400H 20 578406H 26 578410H 32 578412

Mapress → Geberit

Ma.s.ter System TH 14 578348PRESSMASTER TH 16 578352 TH 18 578356 TH 20 578358

TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

MAXITUB RFz 12 578490MAXIPRESS RFz 16 578492

RFz 20 578494RFz 25 578496RFz 32 578498

MAXITUB TH 14 578348METALPEX TH 16 578352

TH 20 578358TH 26 578362TH 32 578364

MEGARO H 11,5 578394HAKAPRESS H 14 578398

H 16 578400H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412

MEGARO B 16 578468MEGAPRESS B 20 578472

B 26 578474B 32 578476

METALGRUP RFz 16 578492PexGrup RFz 20 578494

RFz 25 578496RFz 32 578498

METALGRUP U 16 578374MultiGrup U 18 578376

U 20 578378U 25 578380U 32 578382

MULTITHERM TH 16 578352PRESSSYSTEM TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Multicapas U 16 578374Industrial U 18 578376multitubo systems MT 20 578560MC MT 25 578562

MT 32 578564U 40 578386

Multicapas U 16 578374Industrial MT 20 578560multitubo systems MT 25 578562MM MT 32 578564

TH 16 578352TH 20 578358TH 25 578360TH 26 578362TH 32 578364RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498H 16 578400H 20 578406H 25 578408H 26 578410H 32 578412

NEUTHERM H 16 578400MEKUPRESS-HT H 20 578406

H 26 578410H 32 578412


116


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.NIBCO (POL) H 16 578400NEXT-Heat H 20 578406

H 25 578408H 32 578412TH 16 578352TH 20 578358TH 25 578360TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382

NIBCO (USA) VUS ½” 578566Press System VUS ¾” 578568Copper VUS 1” 578570

VUS 1¼” 578606Nicoll Fluxo TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Nicoll Fluxo Gas TH 16 578352TH 20 578358TH 26 578362

NIROTEC M 15 578312PRESSFITTING M 18 578314

M 22 578316M 28 578318

N.T.M. TH 14 578348WINNY-AL TH 16 578352

TH 18 578356TH 20 578358TH 26 578362TH 32 578364H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

NUPIGECO U 14 578372Multinupi U 16 578374

U 18 578376U 20 578378C 26 578392U 32 578382U 40 578386

Nussbaum V 12 578324Cupress V 15 578328

V 18 578332V 22 578334V 28 578336

Nussbaum VP 16 578482Optiflex VP 20 578484

VP 25 578486VP 32 578488

Nussbaum V 15 578328Optipress V 18 578332

V 22 578334V 28 578336V 35 578604

Nussbaum V 15 578328Optipress Gas V 18 578332

V 22 578334V 28 578336V 35 578604

Nussbaum V 15 578328Optipress-Therm V 18 578332

V 22 578334V 28 578336V 35 578604

O.M.T. H 16 578400Heizungssystem H 20 578406

H 26 578410H 32 578412

Oteraccordi M 12 578310Oter Tecno M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

Oteraccordi M 12 578310Oter Tecno M 15 578312carbonio M 18 578314

M 22 578316M 28 578318M 35 578390

Oteraccordi M 12 578310Oter Tecno Gas M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

Oventrop Cofit P H 16 A 578420H 20 A 578426H 26 A 578430H 32 A 578432

PB TUB RFz 12 578490SERTIPRESS RFz 16 578492

RFz 20 578494RFz 25 578496

Pegler Yorkshire M 15 578312XPress Carbon M 181) 578314

M 22 578316M 281) 578318M 35 578390

Pegler Yorkshire M 12 578310XPress Copper M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390

Pegler Yorkshire M 15 578312XPress Copper M 181) 578314Gas M 22 578316

M 281) 578318Pegler Yorkshire TH 14 578348Henco Multilayer TH 16 578352Solutions TH 18 578356

TH 20 578358TH 26 578362

Pegler Yorkshire M 15 578312XPress Solar M 181) 578314

M 22 578316M 281) 578318M 35 578390

Pegler Yorkshire M 15 578312XPress M 181) 578314Stainless M 22 578316

M 281) 578318M 35 578390

PERFEXIM U 16 578374"PERFEKT U 20 578378SYSTEM" U 25 578380

U 32 578382PERFILTUBO U 16 578374PERFILALUPEX U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

PERFILTUBO M 15 578312PERFILPRESS M 18 578314

M 22 578316M 28 578318M 35 578390

PEXTUBE RFz 16 578492PexTube RFz 20 578494

RFz 25 578496RFz 32 578498

PIPELIFE M 15 578312C-PRESS M 18 578314

M 22 578316M 28 578318M 35 578390

PIPELIFE- TH 16 578352RADOPRESS TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

PLASTICA ALFA H 16 578400Multypex H 20 578406

H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypex H 20 578406Air H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypexalfa Gas H 20 578406

H 26 578410PLASTICA ALFA H 16 578400Multypexalfa Gas H 20 578406protek H 26 578410PLASTICA ALFA H 16 578400Multypex H 20 578406Plus H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypex H 20 578406Thermo H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypex H 20 578406Thermo Plus H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLÁSTICOS RFz 16 578492FERRO RFz 20 578494FERROPLAST RFz 25 578496Pressfitting PE-X RFz 32 578498PLOMYPLAS RFz 16 578492plomyPRESS RFz 20 578494plomyAIR RFz 25 578496

RFz 32 578498TH 16 578352TH 20 578358TH 25 578360TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382

PLOMYPLAS TH 16 578352plomyPRESS TH 20 578358plomyGAS TH 25 578360

TH 32 578364PLOMYPLAS RFz 16 578492plomyPRESS RFz 20 578494plomyLAYER RFz 25 578496


PLOMYPLAS RFz 16 578492plomyPRESS RFz 20 578494plomyLAYER PEX RFz 25 578496


PLOMYPLAS RFz 16 578492plomyPRESS RFz 20 578494plomyPERT EVAL RFz 25 578496


PLOMYPLAS RFz 16 578492plomyPRESS RFz 20 578494plomyPEX RFz 25 578496


117


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.PLOMYPLAS RFz 16 578492plomyPRESS RFz 20 578494plomyPEX EVAL RFz 25 578496


PLUMBING PLUS VAU 15 (OD 12,7 mm) 578630PRESS PLUS VAU 20 (OD 19,1 mm) 578632(AUS) VAU 25 (OD 25,4 mm) 578634

VAU 32 (OD 31,8 mm) 578636POLYPIPE F 16 578456POLYPRESS F 20 578460

F 26 578462F 32 578464

POLYPIPE TH 10 578342POLYSURE TH 15 578350

TH 22 578588TH 28 578590

POLYSAN TH 14 578348Handelsges. TH 16 578352m.b.H. & Co KG TH 17 578354(Krems/Öster- TH 18 578356reich) POLYSAN- TH 20 578358Press-System TH 26 578362

TH 32 578364TH 40 578624

POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) POLYSAN- M 35 578390EUROTUBI C-Stahl-Press-SystemPOLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öste- M 28 578318reich) POLYSAN- M 35 578390EUROTUBI Edel-stahl-Press-SystemPOLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) POLYSAN- M 35 578390EUROTUBIEdelstahl-Press-System GasPOLYSAN U 16 578374(España) U 18 578376Rainbow U 20 578378

U 25 578380U 32 578382U 40 578386

Prandelli H 14 578398Multyrama Pf H 16 578400

H 18 578404H 20 578406H 26 578410H 32 578412

Prandelli H 16 578400Multyrama Pfm H 18 578404

H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 18 578376U 20 578378

PRASKI TH 10 578342BAVARIA-press TH 14 578348

TH 16 578352TH 17 578354TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Raccorderie M 15 578312Metalliche M 18 578314inoxPRES1) M 22 578316

M 28 578318Raccorderie M 15 578312Metalliche M 18 578314steelPRES1) M 22 578316

M 28 578318RBM Tita-gas TH 16 578352

TH 20 578358TH 26 578362TH 32 578364

RBM Tita-fix B 14 578466B 16 578468B 18 578470B 20 578472B 26 578474F 16 578456F 18 578458F 20 578460H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 18 578376U 20 578378

remo H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412

RIFENG U U 14 578372PRESS FITTING U 16 578374(F5) U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

RIFENG TH TH 16 578352PRESS FITTING TH 20 578358(F9) TH 25 578360

TH 26 578362TH 32 578364

RIQUIER RFz 12 578490A SERTIR RFz 16 578492

RFz 20 578494RFz 25 578496

Rofix Climatrix H 16 578400Rhinopex H 20 578406

U 16 578374 U 20 578378

TH 16 578352TH 20 578358TH 26 578362TH 32 578364

Roth RN 14 578434RN 17 578436RN 20 578438RN 25/26 578440RN 32 578442

Roth Nordic RN 16 578454Alu-LaserPlus/ RN 20 578438PressCheck RN 25/26 578440(DNK-NOR-SWE-FIN) RN 32 578442Rubinetterie M 15 578312Bresciane M 18 578314Bonomi M 22 578316TURBO INOX M 28 578318Rubinetterie M 15 578312Bresciane M 18 578314Bonomi M 22 578316TURBO STEEL M 28 578318

Rubinetterie TH 14 578348Bresciane TH 16 578352Bonomi TH 18 578356TURBO PRESS TH 20 578358

TH 26 578362TH 32 578364

Rubinetterie TH 16 578352Bresciane TH 20 578358Bonomi TH 26 578362TURBO PRESS TH 32 578364GASSA.MI plastic TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

SA.MI plastic TH 16 578352Multistrato Gas TH 20 578358

TH 26 578362TH 32 578364

SANHA TH 14 5783483fit-Press TH 16 578352Serie 25000 TH 20 578358

TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 20 578378U 32 578382U 40 578386

SANHA-Press SA 12 578510Chrom SA 15 578514Serie 16000 SA 18 578518

SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390V 12 578324V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336V 35 578604

SANHA-NiroSan- SA 15 578514Presssystem SA 18 578518Serie 9000 SA 22 578520

SA 28 578522M 151) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336V 35 578604

SANHA-NiroSan- SA 15 578514Presssystem SA 18 578518Serie 19000 SA 22 578520(silicone free) SA 28 578522

M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604


118


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA-NiroSan- SA 15 578514Presssystem Gas SA 18 578518Serie 17000 SA 22 578520

SA 28 578522M 15 1) 578312M 181) 578314M 22 1) 578316M 28 578318M 35 578390V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336V 35 578604

SANHA- SA 12 578510Pressfittings SA 14 578512Serie 6000/ SA 15 578514Serie 8000 SA 16 578516

SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390V 12 578324V 14 578326VG 14 578338V 15 1) 578328V 16 578330VG 16 578340V 181) 578332V 22 1) 578334V 28 578336V 35 578604

SANHA- SA 12 578510Pressfittings Gas SA 14 578512Serie 10000/ SA 15 578514Serie 11000 SA 16 578516

SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 221) 578316M 28 578318M 35 578390V 12 578324V 14 578326VG 16 578340V 151) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604

SANHA- SA 12 578510Pressfittings SA 15 578514Solar SA 18 578518Serie 12000/ SA 22 578520Serie 13000 SA 28 578522

M 12 578310M 15 1) 578312M 18 1) 578314M 221) 578316M 28 578318M 35 578390V 12 578324V 151) 578328V 18 1) 578332V 221) 578334V 28 578336V 35 578604

SANHA- SA 12 578510Pressfittings SA 15 578514Air SA 18 578518Serie 14000/ SA 22 578520Serie 15000 SA 28 578522

M 12 578310M 151) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390V 12 578324V 151) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604

SANHA- SA 12 578510Pressfittings SA 15 578514Industrie SA 18 578518Serie 18000 SA 22 578520

SA 28 578522M 12 578310M 151) 578312M 18 1) 578314M 221) 578316M 28 578318M 35 578390V 12 578324V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336V 35 578604

SANHA SA 12 578510PURAPRESS SA 15 578514Serie 80000 SA 18 578518

SA 22 578520SA 28 578522M 121) 578310M 151) 578312M 18 1) 578314M 221) 578316M 281) 578318V 12 578324V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336

SANHA-Therm SA 12 578510Serie 24000 SA 15 578514

SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 221) 578316M 28 578318M 35 578390V 12 578324V 151) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604

SATEC SK VITerm TH 16 578352 TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364U 40 578386

Schlösser TH 16 578352EUROPRESS- TH 20 578358SYSTEM TH 26 578362

TH 32 578364SCHÜTZ EHT TH 14 578348rOpress TH 16 578352

TH 20 578358TH 26 578362TH 32 578364

Schwer Fittings M 12 578310AQUApress M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

Seppelfricke TH 16 578352HENCO PRESS TH 20 578358

TH 26 578362Seppelfricke V 15 578328Sudopress V 18 578332Edelstahl V 22 578334Visu-Control V 28 578336

V 35 578604Seppelfricke V 12 578324Sudopress Kupfer V 15 578328Visu-Control V 18 578332

V 22 578334V 28 578336V 35 578604

Seppelfricke V 15 578328Sudopress Kupfer V 18 578332Visu-Control V 22 578334Gas V 28 578336

V 35 578604Seppelfricke V 15 578328Sudopress Kupfer V 18 578332Visu-Control V 22 578334SolarSeppelfricke TH 14 578348Sudopress SKIN TH 16 578352Visu-control TH 18 578356

TH 20 578358TH 26 578362THL 32 578368TH 40 578624

Seppelfricke M 12 578310XPress C-Stahl M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390

Seppelfricke M 15 578312XPress M 181) 578314Edelstahl M 22 578316

M 281) 578318M 35 578390

Seppelfricke M 12 578310XPress Kupfer M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390

Seppelfricke M 15 578312XPress Kupfer M 181) 578314gas M 22 578316

M 281) 578318SESTA TH 14 578348SESTA GAS TH 16 578352

TH 20 578358TH 26 578362TH 32 578364

SESTA H 16 578400sistema H 20 578406multistrato TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378

SIKO TYPRO H 26 578410TH 16 578352TH 18 578356TH 20 578358TH 26 578362

SIKO TH 14 578348TYROTHERM TH 16 578352

TH 18 578356TH 20 578358TH 26 578362

SLOVARM U 16 578374PEX-THERM U 20 578378

H 26 578410U 32 578382H 16 578400H 20 578406H 26 578410H 32 578412

SOEMS TH 14 578348sistema TH 16 578352multistrato TH 18 578356

TH 20 578358TH 26 578362THL 32 578368

SOEMS V 12 578324sistema rame e V 15 578328inox V 18 578332

V 22 578334V 28 578336

Standard U 16 578374Hidráulica U 18 578376MultiStandard U 20 578378

U 25 578380U 32 578382

STELBI TH 14 578348POLIKRAFT TH 16 578352 TH 18 578356 TH 20 578358

TH 26 578362TH 32 578364

Systerm H 16 A 578420WELCO-Gas H 20 A 578426

H 26 A 578430H 32 A 578432

Systerm H 14 A 578418WELCO-Flex H 16 A 578420

H 17 A 578422H 20 A 578426H 26 A 578430H 32 A 578432

Systerm H 16 A 578420WELCO-FloorSysterm H 16 A 578420WELCO-Teck H 20 A 578426

H 26 A 578430

119


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.TERMICALINE B 16 578468Termipex B 20 578472

B 26 578474B 32 578476H 16 578400H 20 578406TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

TermoConcept Basic E012) 578618TC-PRESSTHERMOLUTZ H 14 578398acular/rapid H 16 578400

H 17 578402TE-SA TH 14 578348TE-SA press TH 16 578352serie 800 TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

THISA RFz 16 578492Thisa multiplus RFz 20 578494

RFz 25 578496RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

THISA RFz 16 578492Thisa Pex RFz 20 578494

RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382

TIEMME TH 14 578348COBRAPRESS TH 16 578352

TH 18 578356 TH 20 578358

TH 25 578360TH 26 578362THL 32 578368TH 40 578624

TIEMME RFz 16 578492Serie 1700 PE-X RFz 20 578494a pressare RFz 25 578496

RFz 32 578498TIEMME TH 16 578352TIEMME Gas TH 20 578358

TH 26 578362THL 32 578368

TKM TH 14 578348Systemtechnik TH 16 578352

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

TRA U 16 578374MULTITRAPRESS U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

TRA TRAPRESS H 12 578396H 16 578400H 20 578406H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498

Tréfimétaux Qtec TH 14 578348TH 16 578352TH 20 578358

TWEETOP U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386

Ulrich H 14 578398VARIOFLEX- H 16 578400HAKAPRESS H 17 578402

H 18 578404H 20 578406H 26 578410H 32 578412

UNICAL AG U 16 578374MAX MULTIPEX U 20 578378

H 26 578410U 32 578382

UNIDELTA TH 14 578348Deltall TH 16 578352

TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 32 578382U 40 578386

Uponor Unipipe U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

Uponor MLC UP 14 578576UP 16 578578UP 18 578580UP 20 578582UP 25 578584UP 32 578586

Uponor MLC-D UP 16 578578UP 20 578582UP 25 578584U 32 578382U 40 578386

Uponor MLC-G UP 20 578582UP 25 578584UP 32 578586

Valsir PEXAL H 14 578398H 16 578400H 20 578406H 26 578410H 32 V 578602

Valsir PEXAL Gas H 14 578398H 16 578400H 20 578406H 26 578410

Van Marcke Log. TH 16 578352Tu-Bi-Pex TH 17 578354

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Van Marcke Log. M 12 578310Tu-Bi-Press M 15 578312

M 18 578314 M 22 578316

M 28 578318M 35 578390

Variotherm TH 11,6 578344System TH TH 16 578352Viega Copatin V 12 578324

V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604

Viega Pexfit Fosta VX 16 578552VX 20 578554VX 25 578556

Viega Pexfit VX 16 578552Fosta G VX 20 578554

VX 25 578556Viega Pexfit Plus VX 12 578550

VX 16 578552VX 20 578554

Viega Pexfit VX 16 578552Pro Fosta VX 20 578554

VX 25 578556Viega Pexfit VX 16 578552Pro Plus VX 20 578554Viega Prestabo V 12 578324

V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604

Viega Profipress V 12 578324VG 14 578338V 15 578328VG 16 578340V 18 578332V 22 578334V 28 578336V 35 578604

Viega V 12 578324Profipress G V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604

Viega V 12 578324Profipress S V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604

Viega V 12 578324Profipress Therm V 15 578328

V 18 578332V 22 578334

Viega ProPress VUS ½” (OD 15,88 mm) 578566System USA VUS ¾” (OD 22,22 mm) 578568

VUS 1” (OD 28,58 mm) 578570VUS 1¼” (OD 34,93 mm) 578606

Viega Propress VAU 15 (OD 12,7 mm) 578630WATER System VAU 20 (OD 19,1 mm) 578632AUS VAU 25 (OD 25,4 mm) 578634

VAU 32 (OD 31,8 mm) 578636Viega PropressG VAU 15 (OD 12,7 mm) 578630GAS System VAU 20 (OD 19,1 mm) 578632AUS VAU 25 (OD 25,4 mm) 578634

VAU 32 (OD 31,8 mm) 578636Viega VP 16 578482Sanfix Fosta VP 20 578484

VP 25 578486VP 32 578488

Viega VP 16 578482Sanfix Plus VP 20 578484Viega Sanpress V 12 578324

V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604

Viega V 15 578328Sanpress Inox V 18 578332

V 22 578334V 28 578336V 35 578604

Viega V 15 578328Sanpress Inox G V 18 578332

V 22 578334V 28 578336V 35 578604

Viessmann TH 14 578348 TH 16 578352 TH 20 578358

TH 26 578362TH 32 578364

VSH Benelux U 14 578372VSH MultiPress U 16 578374

U 20 578378U 25 578380U 32 578382U 40 578386

VSH Benelux M 12 578310XPress Carbon M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390


120


Accessories

Description Art.-No.Steel case with insert for 8 pressing tongs Mini/cropping tongs Mini and compartment for pipe cutter up to 42 mm 578295

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.VSH Benelux M 15 578312XPress Copper M 181) 578314

M 22 578316M 281) 578318M 35 578390

VSH Benelux M 15 578312XPress Copper M 181) 578314GAS M 22 578316

M 281) 578318VSH Benelux M 15 578312XPress Copper M 181) 578314Solar M 22 578316

M 281) 578318M 35 578390

VSH Benelux M 15 578312XPress Stainless M 181) 578314

M 22 578316M 281) 578318M 35 578390

VSH Fittings M 12 578310XPress Carbon M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390

VSH Fittings M 15 578312XPress Stainless M 181) 578314

M 22 578316M 281) 578318M 35 578390

Walter Meier U 16 578374Metalplast U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

Watts MTR TH 16 578352Art press TH 20 578358

TH 26 578362TH 32 578364

WATTS US ⅜” 578534RADIANT US ½” 578536Watts WaterPEX US ¾” 578538

US 1” 578540WATTS US ⅜” 578534RADIANT US ½” 578536Watts US ¾” 578538RadiantPEX US 1” 578540WATTS U 16 (½”) 578374RADIANT U 20 (⅝”) 578378Watts U 25 (¾”) 578380RadiantPEX-AL U 32 (1”) 578382Wavin U 14 578372Tigris K1 U 16 578374

U 20 578378U 25 578380U 32 578382U 40 578386

Wavin U 14 578372Tigris M1 U 16 578374

U 20 578378U 25 578380U 32 578382U 40 578386

WeeConPress M 12 578310C-Stahl M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

WeeConPress M 12 578310Inox M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390

WeeConFlex TH 16 578352MVR TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

WEFA PLASTIC H 16 578400WEFATHERM- H 20 578406PRESS H 26 578410

H 32 578412WEM H 16 578400

U 16 578374WIELAND TH 14 578348cuprotherm TH 16 578352CTX TH 18 578356

TH 20 578358TH 26 578362

Winkler TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364

WKS-Press TH 14 578348TH 16 578352TH 17 578354

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

XtraConnect F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352

TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

(NW 26) U 25 578380U 32 578382

Zetaesse TH 14 578348Multistrato TH 16 578352EUROPEX TH 18 578356

TH 20 578358TH 26 578362TH 32 578364U 14 578372U 16 578374U 18 578376U 20 578378

Zetaesse TH 14 578348Multistrato TH 16 578352ISOPEX TH 18 578356

TH 20 578358TH 26 578362TH 32 578364U 14 578372U 16 578374U 18 578376U 20 578378

Zetaesse Rame TH 14 578348HydroSAN TH 16 578352

TH 20 578358U 14 578372U 16 578374U 20 578378

Zetaesse Rame TH 14 578348ThermoSAN TH 16 578352

TH 20 578358U 14 578372U 16 578374U 20 578378

ZEWOTHERM TH 12 578346TH 16 578352

TH 17 578354TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

ZURN US ⅜” 578534INDUSTRIES US ½” 578536ZURN PEX US ¾” 578538

US 1” 578540


121

Supply formatREMS cropping tong Mini. Cropping tong with reversible cropping inserts for steel, stainless steel, M 6 – M 10. In cardboard box.Description for threaded rods Art.-No.REMS cropping tong Mini M 6 M 6 578620REMS cropping tong Mini M 8 M 8 578621REMS cropping tong Mini M 10 M 10 578622

REMS cropping tongs Mini Accessories for REMS Mini-Press ACC


High performance cropping tongs Mini in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to hardness classification 4.8 (400 N/mm2) M 6 – M 10

REMS cropping tong Mini – cuts in just 2 seconds! Made of forged and specially hardened steel. Reversible cropping inserts for double service life.M cropping inserts with high precision thread contour machined on CNC machining centres for exact guiding of the threaded rod in the cutting process Pliers parts, cropping inserts and specially machined and hardened cutting edges, made to fit exactly, for cutting without burr Threaded rod can be screwed into a threaded connection of the pipe clip or the nut without rework after cutting Cutting device in pliers design (Patent EP 1 459 825, patent US 7,284,330). Very compact design and low weight of the REMS Mini cropping tongs due to special arrangement of the cropping tongs connection (Patent EP 1 952 948).Driven by REMS Mini-Press ACC

Patent EP 1 952 948Patent EP 1 459 825 Patent US 7,284,330

Accessories

Description for threaded rods Art.-No.Cropping insert M 6 (pair) M 6 571891Cropping insert M 8 (pair) M 8 571896Cropping insert M 10 (pair) M 10 571866Steel case with insert for 8 pressing tongs Mini/cropping tongs Mini and compartment for pipe cutter up to 42 mm 578295

122

REMS Eco-Press Manual radial press


Universal, manual radial press for producing pipe pressing joints for all common pressfitting systems.Pressing joints with plastic and multi-layer composite tubes Ø 10 – 26 mmComplete range of REMS pressing tongs for all common pressfitting systems, see page 128 – 140.

REMS Eco-Press – universal up to Ø 26 mm. Secure crimping in seconds. System advantageOnly one type of pressing tongs for all REMS radial presses (except REMS Mini-Press ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fit the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.

Pressing tongs for all common systemsComplete assortment of REMS pressing tongs for all common pressfitting systems (page 128 – 140). High-compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond to the respective pressfitting system. Thus perfect system-conformity, safe press jointing.

DesignCompact, handy, light. Drive unit with short tubular arms only 1.6 kg. Works any-where, free-hand, overhead, in confined areas. Secure seating of pressing tongs through locking pins. Dividable tubular arms for individual adjustment of leverage to accomodate different force demands of different pressfitting systems.

Pressing operation A perfect joint is achieved when pressing tongs close completely. Final-lock- positioning, the pressing jaws remain in a closed position until opening. This way, the perfect pressing joint (completely closed pressing jaws) can be observed.

Supply formatREMS Eco-Press drive unit. Manual radial press with final-lock-positioning for producing pressing joints of plastic and multi-layer composite tubes Ø 10 – 26 mm. For operating with REMS pressing tongs. With dividable tubular arms. In skin package.

Art.-No.574000

Accessories

Description Art.-No.REMS pressing tongs/pressing rings see page 128 – 140.REMS cropping tongs for threaded rods see page 143.Carrying bag for drive unit and for 3 pressing tongs 574436Steel case with insert for drive unit and for 3 pressing tongs 574430

Patent EP 1 223 008 Patent US 6,739,172

123

REMS Power-Press E Electric radial press


Universal, handy electric tool for producing pipe pressing joints for all common pressfitting systems.Pipe pressing joints Ø 10 – 108 mmComplete range of REMS pressing tongs for all common pressfitting systems, see page 128 – 140.

REMS Power-Press E – universal up to Ø 108 mm. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs for all REMS radial presses (except REMS Mini-Press ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fit the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.


DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 4.7 kg. Works anywhere, free-hand, overhead, in confined areas. Secure seating of pressing tongs by automatic locking. For driving REMS pressing tongs/ pressing rings.

Pressing operation by touch-controlFor reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. The pressing tongs remain in a closed position until machine is switched and runs into reverse. The perfect pressing joint (completely closed pressing jaws) can be observed.

DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-mechanical drive with proven universal motor, 450 W, maintenance-free gear with safety slipping clutch and in-feed system with machine screw spindle. Safety tip switch.

Supply formatREMS Power-Press E Basic-Pack. Electric radial press for producing pressing joints Ø 10 – 108 mm. For driving REMS pressing tongs/pressing rings. Pressing tongs seat with auto matic locking. Electro-mechanical drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, maintenance-free gear with safety slipping clutch and in-feed system with machine screw spindle, safety tip switch. In sturdy steel case.

Art.-No.572110


Accessories

Description Art.-No.REMS Power-Press E Drive Unit 572100REMS pressing tongs/pressing rings see page 128 – 140.REMS cropping tongs for threaded rods see page 143.REMS cable shear for electric cable see page 143.Steel case with insert 570280


124

REMS Power-Press Electro-hydraulic radial press with switch-off signal


Universal, handy electric tool with switch-off signal for producing pipe pressing joints for all common pressfitting systems.Pipe pressing joints Ø 10 – 108 mmComplete range of REMS pressing tongs for all common pressfitting systems, see page 128 – 140.

REMS Power-Press – universal up to Ø 108 mm. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs for all REMS radial presses (except REMS Mini-Press ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fit the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.


DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 4.7 kg. Works anywhere, free-hand, overhead, in confined areas. Ideal weight distribution for single handed operation. Ergonomically designed housing with recessed grip. Swivelling pressing tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing chains.

Pressing operation by touch-controlFor reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. Acoustic signal after successful completion of pressing operation. The pressing tongs remain in a closed position until reset button is pushed and releases. This way, the perfect pressing joint (completely closed pressing jaws) can be observed.

DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with proven universal motor 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.

Supply formatREMS Power-Press Basic-Pack. Electro-hydraulic radial press with switch-off signal for producing pressing joints Ø 10 – 108 mm. For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing chains. Pressing tongs seat with automatic locking. Electro-hydraulic drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. In sturdy steel case.

Art.-No.577011


Accessories

Description Art.-No.REMS Power-Press Drive Unit 577001REMS pressing tongs/pressing rings see page 128 – 140.REMS cropping tongs for threaded rods see page 143.REMS cable shear for electric cable see page 143.Steel case with insert 570280


125

REMS Power-Press ACC Electro-hydraulic radial press with automatic retraction

with automatic circuit control


Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems.Pipe pressing joints Ø 10 – 108 mmComplete range of REMS pressing tongs for all common pressfitting systems, see page 128 – 140.

REMS Power-Press ACC – universal up to Ø 108 mm. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs for all REMS radial presses (except REMS Mini-Press ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fit the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.


DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 4.7 kg. Works anywhere, free-hand, overhead, in confined areas. Ideal weight distribution for single handed operation. Ergonomically designed housing with recessed grip. Swivelling pressing tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing chains.


DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with proven universal motor 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.

Supply formatREMS Power-Press ACC Basic-Pack. Electro-hydraulic radial press with automatic retraction for producing pressing joints Ø 10 – 108 mm. For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/ pressing chains. Pressing tongs seat with automatic locking. Electro-hydraulic drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. In sturdy steel case.

Art.-No.577010


Accessories

Description Art.-No.REMS Power-Press ACC Drive Unit 577000REMS pressing tongs/pressing rings see page 128 – 140.REMS cropping tongs for threaded rods see page 143.REMS cable shear for electric cable see page 143.Steel case with insert 570280


International

Design Award

126

REMS Akku-Press Cordless radial press with switch-off signal


Universal, handy electric tool with switch-off signal for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation.Pipe pressing joints Ø 10 – 108 mmComplete range of REMS pressing tongs for all common pressfitting systems, see page 128 – 140.

REMS Akku-Press Li-Ion – universal up to Ø 108 mm. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs for all REMS radial presses (except REMS Mini-Press ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fit the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.


DesignCompact, handy, light. Drive unit with battery only 4.3 kg. Works anywhere, free-hand, overhead, in confined areas. Optimum weight distribution for single-hand operation. Ergonomically shaped housing with recessed grip. Swivelling pressing tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing chains. For battery and corded operation. Electronic charging status check with flat battery protection and charging status indicator with 2-coloured LED.

Pressing operation by touch-controlFor reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. Acoustic signal after successful completion of pressing operation. The pressing tongs remain in a closed position until reset button is pushed and releases. This way, the perfect pressing joint (completely closed pressing jaws) can be observed.

DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.

Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 3.2 Ah capacity, for long service life. Powerful and light. Li-Ion 14.4 V, 3.2 Ah battery for approx. 270 pressings Viega Profipress DN 15 per battery charge. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V voltage supply for mains operation instead of Li-Ion battery 14.4 V, as accessory.

Supply formatREMS Akku-Press Li-Ion Basic-Pack. Cordless radial press with switch-off signal for producing pipe pressing joints Ø 10 – 108 mm. For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing chains. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 14.4 V, 380 W, robust planetary gear, eccentric recipro-cating pump and compact high power hydraulic system. Safety tip switch. Battery Li-Ion 14.4 V, 3.2 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 65 W. In sturdy steel case.

Art.-No.571013


Accessories

Description Art.-No.REMS pressing tongs/pressing rings see page 128 – 140.REMS cropping tongs for threaded rods see page 143.REMS cable shear for electric cable see page 143.REMS Akku-Press Li-Ion drive unit, without battery 571003Battery Li-Ion 14.4 V, 3.2 Ah 571555Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560Voltage supply Li-Ion 230 V 571565Steel case with inlay 571290REMS cordless LED lamp see page 89 175200

with charging status check


International

Design Award

127

REMS Akku-Press ACC Cordless radial press with automatic circuit control



Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation.Pipe pressing joints Ø 10 – 108 mmComplete range of REMS pressing tongs for all common pressfitting systems, see page 128 – 140.

REMS Akku-Press ACC Li-Ion – universal up to Ø 108 mm. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs for all REMS radial presses (except REMS Mini-Press ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fit the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.


DesignCompact, handy, light. Drive unit with battery only 4.3 kg. Works anywhere, free-hand, overhead, in confined areas. Optimum weight distribution for single-hand operation. Ergonomically shaped housing with recessed grip. Swivelling pressing tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing chains. For battery and corded operation. Electronic charging status check with flat battery protection and charging status indicator with 2-coloured LED.


DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.

Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 3.2 Ah capacity, for long service life. Powerful and light. Li-Ion 14.4 V, 3.2 Ah battery for approx. 270 pressings Viega Profipress DN 15 per battery charge. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V voltage supply for mains operation instead of Li-Ion battery 14.4 V, as accessory.

Supply formatREMS Akku-Press ACC Li-Ion Basic-Pack. Cordless radial press with auto-matic circuit control for producing pipe pressing joints Ø 10 – 108 mm. For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing chains. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 14.4 V, 380 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. Battery Li-Ion 14.4 V, 3.2 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50– 60 Hz, 65 W. In sturdy steel case.

Art.-No.571014


Accessories

Description Art.-No.REMS pressing tongs/pressing rings see page 128 – 140.REMS cropping tongs for threaded rods see page 143.REMS cable shear for electric cable see page 143.REMS Akku-Press ACC Li-Ion drive unit, without battery 571004Battery Li-Ion 14.4 V, 3.2 Ah 571555Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560Voltage supply Li-Ion 230 V 571565Steel case with inlay 571290REMS cordless LED lamp see page 89 175200


128

REMS pressing tongs Accessories for REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes

for all common pressfitting systems Pressing contours

Example REMS pressing tongs M: ”M” imprint on pressed fitting for traceability according to EN 1775:2007

B

ACz

HE

F

G

H

HA

KI

K

M

MT

RFz

RN

SA

TH

U

UP

US

V

VX

VAU

VUS

VIC

VP

REMS pressing tongsHigh-compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manu-factured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour. Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. All pressing tongs marked with * have an optional connection (Patent EP 1 223 008, Patent US 6,739,172) for manual drive through the radial press REMS Eco-Press. Read and follow the installation and assembly instructions of the system provider/manufacturer.

Select pressing tongs yourself!Search for the required pressfitting system in the opposite table and select the correct pressing tongs size. Please note that pressfitting systems for gas installation may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Intermediate tongs (page 140) are necessary for driving the REMS pressing rings (PR).

Traceability according to EN 1775:2007REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process. With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.


Patent EP 1 223 008Patent US 6,739,172


Confirmation of suitability See page 141.

129


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.AC-FIX PRESS H 12* 570300(Global Piping H 16* 570320Systems) H 20* 570350

H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785VX 16* 571635VX 20* 571640

AC-FIX H 16* 570320PRESS-MULTI H 18* 570340(Global Piping H 20* 570350Systems) H 25* 570360

H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

ACOME MT ACz 12* 572642ACz 16* 572644ACz 20* 572646ACz 25 572648

AHLSELL M 12 570100A-press M 15 570110elförzinkad M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

AHLSELL V 12 570107A-press koppar V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

AHLSELL M 15 570110A-press rostfritt M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

AIRBEL M 12 570100PRESSCLIM M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

AIRBEL M 12 570100SERTINOX M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Albion Valves M 15 570110DZR Brass M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

ALB TH 16* 570460Sistema Multicapa TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (S) 572365

APE Raccordi TH 16* 570460a pressare TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

ASTM F 1807 US ⅜”* 571450(Fittings with US ½”* 571455Copper Crimp US ¾”* 571460Ring for PEX US 1”* 571465tubing) US 1 ¼” 571470

US 1 ½” 571475US 2 ” 571477

Bampi BALPEX TH 14* 570455(serie MP) TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Bampi BALPEX TH 16* 570460Gas TH 20* 570470

TH 26* 570475BARBI RFz 12* 571320EASYPRESS RFz 16* 571325(Industrial Blansol) RFz 20* 571330

RFz 25 571335RFz 32 571340H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380

BARBI RFz 12* 571320MULTIPEX RFz 16* 571325(Industrial Blansol) RFz 20* 571330

RFz 25 571335RFz 32 571340H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (S) 572365

BEGETUBE/ B 14* 570845IVAR B 16* 570850

B 18* 570855B 20* 570860B 26 570870B 32 570880F 40 570740F 50 570745F 63 (S) 572385F 75 (PR-3B)3) 572830

BRASELI RFz 16* 571325Pressfitting PE-X RFz 20* 571330

RFz 25 571335RFz 32 571340

BRASELI U 16* 570765Pressfitting U 18* 570770Multicapa U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795

Brass Form H 16* 570320Press Form H 18* 570340Pex H 20* 570350

TH 16* 570460TH 18* 570465TH 20* 570470U 16* 570765U 18* 570770U 20* 570775

Brass Form H 16* 570320Press Form H 18* 570340Pex-Al-Pex H 20* 570350

TH 16* 570460TH 18* 570465TH 20* 570470U 16* 570765U 18* 570770U 20* 570775

Brass & Fittings RFz 16* 571325RETI-PRESS ACz 20* 572646

RFz 25 571335RFz 32 571340

BRASSTECH H 16* 570320MULTItermoSAN H 18* 570340Brasspress H 20* 570350

H 26* 570370TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775

BROEN M 15 570110BALLOFIX PRES M 18 570120

M 22 570130V 15 570115V 18 570125V 22 570135

BUCCHI tech MP TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480

Business Key M 15 570110MT-PRESS M 18 570120(inox) M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

CHIBRO M 12 570100pressfitting M 15 570110acciaio al carbonio M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

CHIBRO M 15 570110pressfitting M 18 570120inox M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

CHIBRO M 15 570110pressfitting M 18 570120inox gas M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pressfitting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fit the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation ”108” (1st quarter of 2008), ”208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfitting system producing a pressing joint with manual radial presses is not permitted.3) An adapter tong is required for driving pressing rings (PR), see page 140.4) Fittings made of red bronze must be pressed with press rings with press contour VUSR, fittings made of copper and stainless steel with pressing rings

with press contour VUSF.5) For taking suitable pressing inserts.The suitability of REMS pressing tools for pressfitting systems: Date 07.03.2013. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue. Pressing tongs/pressing rings for additional pressfitting systems on request.

130


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.chronimo SA 15 570935SANHA-NiroSan- SA 18 570940Presssystem SA 22 570945

SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

CIMBERIO SpA SA 15 570935Cim 220 SA 18 570940

SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

CIMBERIO SpA VUS ½” 571770Cim 220.1 VUS ¾” 571775

VUS 1” 571780VUS 1¼” 571785VUS 1½” 571790VUS 2” 571795

CIMBERIO SpA SA 15 570935Cim 220G SA 18 570940

SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

CIMBERIO SpA SA 15 570935Cim 1220M SA 22 570945

SA 28 570950SA 35 570955M 15 570110M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

CIMBERIO SpA SA 15 570935Cim 1220V SA 22 570945

SA 28 570950SA 35 570955V 15 570115V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Climatek TH 14* 570455Clima Therm TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480H 40 A (4G) 570695

ClouSet Press TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475

Comap V 12 570107Sudopress Cu V 14 570112Visu-Control V 15 570115

V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Comap V 12 570107Sudopress V 14 570112Cu Visu-Control V 15 570115Gas V 16 570117

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Comap V 12 570107Sudopress Cu V 14 570112Visu-Control V 15 570115Solar V 16 570117

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Comap RFz 12* 571320PEXPress RFz 16* 571325

RFz 20* 571330RFz 25 571335

Comap TH 16* 570460SKINPress TH 18* 570465Visu-Control Gas TH 20* 570470

TH 26* 570475THL 32 570487

Comap TH 14* 570455SKINPress TH 16* 570460Visu-Control TH 18* 570465

TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

COMISA TH 14* 570455Press System TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

COMISA TH 16* 570460Press System Gas TH 20* 570470

TH 26* 570475TH 32 570480

CONEL F 16* 570715CONNECT F 20* 570725MULTI F 26* 570730

F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(NW 26) U 25* 570780U 32 570785

Dalpex TH 14* 570455Laser Multi Dalpex TH 16* 570460


Danfoss SpeedUp U 16* 570765FH Composite AL U 20* 570775Danfoss Basic U 16* 570765FH Composite AL U 20* 570775DIWAflex systems TH 14* 570455


DUOFIL U 16* 570765MKSYSTEM U 18* 570770

U 20* 570775U 25* 570780U 32 570785

DW Verbundrohr U 16* 570765multitubo systems U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

EBRILLE U 16* 570765Isomonflex U 18* 570770

U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785

EBRILLE U 14* 570760Monflex U 16* 570765

U 18* 570770U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

EFFEBI M 15 570110PRESSTIGE M 18 570120

M 22 570130M 28 570140M 35 570150V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

EFFEBI TOF TH 16* 570460MULTIPINZA TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735F 40 570740F 50 570745F 63 (S) 572385H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

egeda Comisa TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

egeda Baronio V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Elkhart VUS ½” 571770APOLLOXPRESS VUS ¾” 571775Fittings Copper VUS 1” 571780and Low-Lead VUS 1¼” 571785Brass VUS 1½” 571790

VUS 2” 571795Elkhart VUSF 2½” (PR-3B)3) 572819APOLLOXPRESS VUSF 3” (PR-3B)3) 572820LD-C Fittings VUSF 4” (PR-3B)3) 572821CopperEMMETI B 16* 570850GERPEX- B 20* 570860FIVPRESS B 26 570870

B 32 570880F 16* 570715F 20* 570725H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

EMPUR TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 20* 570470TH 25* 570495

EUROTUBI M 12 570100Europa C-STAHL M 15 570110PRESSFITTING M 18 570120SISTEM1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

EUROTUBI M 15 570110Europa INOX M 18 570120PRESSFITTING M 22 570130SISTEM1) M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

131


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.FAR Rubinetterie TH 14* 570455PRESSFAR TH 16* 570460

TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

F.B.Q. BARONIO V 12 570107BQ press V 14 570112

V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

F.B.Q. BARONIO V 15 570115BQ press V 18 570125carbon steel V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

F.B.Q. BARONIO V 15 570115BQ press gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

FELSINEA TECH TH 14* 570455Felsineapress TH 16* 570460


Fercofloor RFz 16* 571325DUO Press RFz 20* 571330FERCO PEX RFz 25 571335

RFz 32 571340Fercofloor RFz 16* 571325DUO Press RFz 20* 571330MULTIFER RFz 25 571335

RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

FILTUBE FTB 15 571432Filpress FTB 18 571434

FTB 22 571436FTB 28 571438FTB 35 571440M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FILTUBE M 15 570110Instalpress M 18 570120Carbon Steel M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FILTUBE M 15 570110Instalpress M 18 570120Copper M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FILTUBE M 15 570110Instalpress M 18 570120Inox M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Fimisol H 14* 570310HAKAPRESS H 16* 570320

H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790

Fittings Estándar RFz 16* 571325ECO-PRESS RFz 20* 571330

RFz 25 571335RFz 32 571340

Fittings Estándar RFz 16* 571325MULTICAPA RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

Fittings Estándar RFz 16* 571325PE-X RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785

FOHS TH 16* 570460HEIZTECHNIK TH 20* 570470FOHSPRESS TH 26* 570475

TH 32 570480FORNARA B 16* 570850ForPress B 20* 570860

B 26 570870B 32 570880F 16* 570715F 20* 570725F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785


V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175


V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 12 570107FRABOPRESS V 15 570115INOX 316 V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 15 570115FRABOPRESS V 18 570125C-STEEL V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 15 570115FRABOPRESS V 18 570125C-STEEL GAS V 22 570135

V 28 570145V 35 570155

FRABO TH 16* 570460FRABOPRESS TH 20* 570470MULTI-BRASS TH 26* 570475(MB) TH 32 570480

U 16* 570765U 20* 570775

FRABO H 16* 570320FRABOPRESS H 20* 570350MULTI-PLUS U 16* 570765(MP) U 20* 570775FRABO V 15 570115SOLARPRESS V 18 570125

V 22 570135V 28 570145

Fränkische B 16* 570850alpex-duo B 18* 570855

B 20* 570860B 26 570870B 32 570880F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480

Fränkische F 16* 570715alpex F50 PROFI F 20* 570725

F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(NW 26) U 25* 570780U 32 570785

Fränkische F 202) 570725alpex-gas2) F 262) 570730

F 322) 570735Fränkische F 40 570740alpex L F 50 570745

F 63 (S) 572385F 75 (PR-3B)3) 572830

FRIATHERM uni H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790TH 50 (S) 572400TH 63 (S) 572405

gabotherm H+S TH 10* 570467TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

GAROS TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485



132


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Geberit Mapress M 12 570100C-STAHL M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Geberit Mapress M 12 570100EDELSTAHL M 15 570110


Geberit Mapress M 15 570110EDELSTAHL Gas M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Geberit Mapress M 12 570100KUPFER M 15 570110


Geberit Mapress M 15 570110KUPFER Gas M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Geberit Mepla G 16* 570400G 20* 570410G 26* 570420G 32 570430G 40 570440G 50 570450G 63 (S) 572470

General Fittings TH 16* 570460Serie 5S00 TH 18* 570465

TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 32 570785U 40 570790U 50 570795

Giacomini H 16* 570320Raccordi RM H 20* 570350Giacomini H 26* 570370

H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475THL 32 570487U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S) 572365

Giacomini V 15 570115Valvole Giacomini V 18 570125serie R850V V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150

Ginde Press U 16* 570765Fitting for Ginde U 20* 570775Multi-layer Pipe U 25* 570780System U 32 570785

Global Plastic TH 16* 570460Rothapress TH 18* 570465

TH 20* 570470TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

GLOBAL U 16* 570765TRADE U 20* 570775aqualpress U 25* 570780system U 32 570785Golan Pipe U 16* 570765Systems U 20* 570775(Scandinavia) U 25* 570780Alu-Pres U 32 570785

U 40 570790U 50 570795U 63 (S) 572365

GS TH 14* 570455Wärmesysteme TH 16* 570460System TH TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

GS V 15 570115Wärmesysteme V 18 570125System V V 22 570135

V 28 570145V 35 570155

GSP Group TH 16* 570460USMetrix TH 20* 570470HAGOS TH 16* 570460HakaGerodur TH 16* 570460HAKASAN TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Harden 2000 TH 14* 570455Poly-Pex 2000 TH 16* 570460

TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Harden 2000 TH 16* 570460Poly-Pex Gas TH 20* 570470

TH 26* 570475THL 32 570487

Harden 2000 TH 14* 570455Plastic-Press TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475

HASTINIK M 15 570110Chibro M 18 570120Pressfitting M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

heima-press TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

HELIROMA U 16* 570765klimapress U 18* 570770


HELIROMA RFz 16* 571325romapress RFz 20* 571330

RFz 25 571335RFz 32 571340

Henco TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902

Henco Gas TH 16* 570460TH 20* 570470TH 26* 570475HE 32 571900

herotec TH 14* 570455Tempuss-press TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

herotec H 16* 570320Tempuss-press H 20* 570350Plus H 25* 570360

H 32 570380MT 20* 571744MT 25* 571746MT 32 571748RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

Herz pipefix TH 10* 570467TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

HITEC Sistema TH 14* 570455Multistrato TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400

Hydro-Air US ⅜”* 571450Systems US ½”* 571455Hydro-Plumb US ¾”* 571460Plus PEX US 1”* 571465

US 1 ¼” 571470Hydro-Air U 16* (½”) 570765Systems U 20* (⅝”) 570775Hydro-Flex U 25* (¾”) 570780PEX-AL-PEX U 32 (1“) 570785IBP >B< Flex U 16* 570765

U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

IBP >B< Press V 12 570107V 14 570112V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

IBP >B< Press V 12 570107Carbon V 14 570112

V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

IBP >B< Press V 15 570115Gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

IBP >B< Press V 15 570115Inox V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

IBP >B< Press V 15 570115Solar V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Idrosanitaria TH 16* 570460Bonomi TH 20* 570470Homegas TH 26* 570475

133


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Idrosanitaria TH 16* 570460Bonomi TH 18* 570465Idropress TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

IDROSISTEMI TH 16* 570460Ta-Press TH 20* 570470

TH 26* 570475TH 32 570480F 16* 570715F 20* 570725F 26* 570730F 32 570735F 40 570740F 50 570745H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

IPA IPANA-Press TH 10* 570467TH 11,6* 570482TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 22* 570472TH 25* 570495TH 26* 570475TH 28 570477TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

IPALPEX TH 14* 570455(Industrie du TH 16* 570460Plastique et TH 18* 570465Accessoires) TH 20* 570470

TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

IPLEX K16/P18* 572600PIPELINES PF 22* 571980AUSTRALIAIplex Pro-fitIPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K1 K1/32 572615(Gas) K1/40 572620

K1/50 572625IPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K2ISOLTUBEX RFz 16* 571325ISOLPEX RFz 20* 571330

RFIz 25 571337RFIz 32 571342

ISOLTUBEX RFz 16* 571325Multicapa RFz 20* 571330

RFIz 25 571337RFIz 32 571342U 40 570790U 50 570795U 63 (S) 572365

ISOTUBI M 15 570110NUMEPRESS M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

IVAR B 20* 570860ALPEX-GAS B 26 570870

B 32 570880

IVAR B 14* 570845Ivar-Press B 16* 570850

B 18* 570855B 20* 570860B 26 570870B 32 570880F 40 570740F 50 570745F 63 (S) 572385

IVAR TH 16* 570460MULTI PRESS TH 20* 570470GAS TH 26* 570475

TH 32 570480IVAR TH 16* 570460Multi Press MP TH 18* 570465

TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735F 40 570740F 50 570745F 63 (S) 572385H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790U 50 570795B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

IVAR TH 16* 570460Plastic Multi Press TH 20* 570470PMP TH 25* 570495

TH 26* 570475TH 32 570480F 16* 570715F 20* 570725F 26* 570730F 32 570735H 16* 570320H 20* 570350H 25* 570360H 26* 570370H 32 570380U 16* 570765U 20* 570775U 25* 570780C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

Jäger H 14* 570310aquapress H H 16* 570320

H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (S) 572365

Jäger M 15 570110Niropress Typ M M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Jaraflex- TH 14* 570455Presssystem TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

KAN U 16* 570765KAN-therm U 20* 570775

U 25* 570780C 26* 570750U 32 570785U 40 570790TH 50 (S) 572400TH 63 (S) 572405

KAN U 14* 570760KAN-therm LBP U 16* 570765

U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790TH 14* 570455TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

KAN M 15 570110KAN-therm M 181) 570120Inox M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KAN M 15 570110KAN-therm M 181) 570120Steel M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KE KELIT U 16* 570765KELIT KELOX U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 75 (PR-3B)3) 572828

KE KELIT M 15 570110steelFIX M 18 570120C-Stahl M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KE KELIT M 15 570110steelFIX M 18 570120Edelstahl M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KISAN KI 16* 571360Kisan KI 20* 571370Develeopment KI 25* 571375(KD) TH 16* 570460

TH 20* 570470TH 25* 570495

KISAN KI 16* 571360Kisan WL KI 20* 571370

KI 25* 571375KI 32 571380TH 16* 570460TH 20* 570470TH 25* 570495

KISAN KI 16* 571360Kisan WM KI 20* 571370

KI 25* 571375KI 32 571380

KISAN KI 16* 571360Kisan WT KI 20* 571370



134


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.KISAN M 15 570110Kistal C M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KISAN M 15 570110Kistal Inox M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KME Q-tec TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475

KLIMAT TH 16* 570460Effetto Radiante TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570715F 20* 570725F 26* 570730F 32 570735F 40 570740F 50 570745F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795B 16* 570850B 20* 570860B 26 570870B 32 570880

Largo- TH 12* 570452Presssystem TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

LECHAR TH 16* 570460ALCOBRAPEX TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485

LECHAR U 16* 570765COBRAPEX U 20* 570775

U 25* 570780U 32 570785

LEGEND-PRESS VUS ½” 571770press fitting VUS ¾” 571775system VUS 1” 571780

VUS 1¼” 571785VUS 1½” 571790VUS 2” 571795

LK Systems V 12 570107LK >B<Press V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

LK Systems V 12 570107LK >B<Press V 15 570115Elförzinkat V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

LK Systems V 15 570115LK >B<Press V 18 570125Gas V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

LK Systems TH 16* 570460LK Universal TH 20* 570470

TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Mair Heiztechnik M 12 570100Gomafix Cu/E M 15 570110

M 181) 570120M 22 570130

Mair Heiztechnik H 11,5* 570315Gomafix M H 14* 570310

H 16* 570320H 20* 570350

Mair Heiztechnik H 11,5* 570315M-Press H 14* 570310

H 16* 570320H 20* 570350H 26* 570370H 32 570380U 40 570790

Mapress → Geberit

Ma.s.ter System TH 14* 570455PRESSMASTER TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

MAXITUB RFz 12* 571320MAXIPRESS RFz 16* 571325

RFz 20* 571330RFz 25 571335RFz 32 571340

MAXITUB TH 14* 570455METALPEX TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480

MEGARO H 11,5* 570315HAKAPRESS H 14* 570310

H 16* 570320H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790F 50 570745F 63 (S) 572385

MEGARO B 16* 570850MEGAPRESS B 20* 570860

B 26 570870B 32 570880F 40 570740F 50 570745F 63 (S) 572385

METALGRUP RFz 16* 571325PexGrup RFz 20* 571330

RFz 25 571335RFz 32 571340

METALGRUP U 16* 570765MultiGrup U 18* 570770

U 20* 570775U 25* 570780U 32 570785

MULTITHERM TH 16* 570460PRESSSYSTEM TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

Multicapas U 16* 570765Industrial U 18* 570770multitubo systems MT 20* 571744MC MT 25* 571746

MT 32 571748U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

Multicapas U 16* 570765Industrial MT 20* 571744multitubo systems MT 25* 571746MM MT 32 571748

TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340H 16* 570320H 20* 570350H 25* 570360H 26* 570370H 32 570380

NEUTHERM H 16* 570320MEKUPRESS-HT H 20* 570350

H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790

NIBCO (POL) H 16* 570320NEXT-Heat H 20* 570350

H 25* 570360H 32 570380TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

NIBCO (USA) VUS ½” 571770Press System VUS ¾” 571775Copper VUS 1” 571780

VUS 1¼” 571785VUS 1½” 571790VUS 2” 571795

Nicoll Fluxo TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Nicoll Fluxo Gas TH 16* 570460TH 20* 570470TH 26* 570475

NIROTEC M 15 570110PRESSFITTING M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170

N.T.M. TH 14* 570455WINNY-AL TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365

NUPIGECO U 14* 570760Multinupi U 16* 570765

U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Nussbaum V 12 570107Cupress V 15 570115

V 18 570125V 22 570135V 28 570145

Nussbaum VP 16* 570910Optiflex VP 20* 570915

VP 25* 570920VP 32 570925

Nussbaum V 15 570115Optipress V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815VF 76,1 (PR-3B)3) 572816VF 88,9 (PR-3B)3) 572817VF 108,0 (PR-3B)3) 572818

Nussbaum V 15 570115Optipress-Gas V 18 570125


Nussbaum V 15 570115Optipress-Inox V 18 570125


Nussbaum V 15 570115Optipress-Therm V 18 570125


O.M.T. H 16* 570320Heizungssystem H 20* 570350

H 26* 570370H 32 570380H 40 (4G) 570390

135


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Oteraccordi M 12 570100Oter Tecno M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Oteraccordi M 12 570100Oter Tecno M 15 570110carbonio M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Oteraccordi M 12 570100Oter Tecno Gas M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150

Oventrop Cofit P H 16 A* 570620H 20 A* 570650H 26 A* 570670H 32 A 570680H 40 A 570690U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

PB TUB RFz 12* 571320SERTIPRESS RFz 16* 571325

RFz 20* 571330RFz 25 571335

Pegler Yorkshire M 15 570110XPress Carbon M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 12 570100XPress Copper M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 15 570110XPress Copper M 181) 570120Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire TH 14* 570455Henco Multilayer TH 16* 570460Solutions TH 18* 570465

TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902

Pegler Yorkshire M 15 570110XPress Solar M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 15 570110XPress M 181) 570120Stainless M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PERFEXIM U 16* 570765"PERFEKT U 20* 570775SYSTEM" U 25* 570780

U 32 570785PERFILTUBO U 16* 570765PERFILALUPEX U 18* 570770


PERFILTUBO M 15 570110PERFILPRESS M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PEXTUBE RFz 16* 571325PexTube RFz 20* 571330

RFIz 25 571337RFIz 32 571342

PIPELIFE M 15 570110C-PRESS M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PIPELIFE- TH 16* 570460RADOPRESS TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

PLASTICA ALFA H 16* 570320Multypex H 20* 570350

H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypexalfa Gas H 20* 570350

H 26* 570370PLASTICA ALFA H 16* 570320Multypexalfa Gas H 20* 570350protek H 26* 570370PLASTICA ALFA H 16* 570320Multypex H 20* 570350Air H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypex H 20* 570350Plus H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypex H 20* 570350Thermo H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypex H 20* 570350Thermo Plus H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLÁSTICOS RFz 16* 571325FERRO RFz 20* 571330FERROPLAST RFz 25 571335Pressfitting PE-X RFz 32 571340PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyAIR RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

PLOMYPLAS TH 16* 570460plomyPRESS TH 20* 570470plomyGAS TH 25* 570495

TH 32 570480PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyLAYER RFz 25 571335


PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyLAYER PEX RFz 25 571335


PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyPERT EVAL RFz 25 571335


PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyPEX RFz 25 571335


PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyPEX EVAL RFz 25 571335


PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687PRESS PLUS VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

POLYPIPE F 16* 570715POLYPRESS F 20* 570725

F 26* 570730F 32 570735F 40 570740F 50 570745F 63 (S) 572385F 75 (PR-3B)3) 572830

POLYPIPE TH 10* 570467POLYSURE TH 15* 570457

TH 22* 570472TH 28 570477

POLYSAN TH 14* 570455Handelsges. TH 16* 570460m.b.H. & Co KG TH 17* 570462(Krems/Öster- TH 18* 570465reich) POLYSAN- TH 20* 570470Press-System TH 26* 570475

TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829



136


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) POLYSAN- M 35 570150EUROTUBI M 42 (PR-3S)3) 572706C-Stahl-Press- M 54 (PR-3S)3) 572708SystemPOLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) POLYSAN- M 35 570150EUROTUBI M 42 (PR-3S)3) 572706Edelstahl- M 54 (PR-3S)3) 572708Press-SystemPOLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) POLYSAN- M 35 570150EUROTUBI M 42 (PR-3S)3) 572706Edelstahl-Press M 54 (PR-3S)3) 572708System GasPOLYSAN U 16* 570765(España) U 18* 570770Rainbow U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Prandelli H 14* 570310Multyrama Pf H 16* 570320

H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795

Prandelli H 16* 570320Multyrama Pfm H 18* 570340

H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 18* 570770U 20* 570775

PRASKI TH 10* 570467BAVARIA-press TH 14* 570455

TH 16* 570460TH 17* 570462TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

Raccorderie M 15 570110Metalliche M 18 570120inoxPRES1) M 22 570130

M 28 570140M 35 570150

Raccorderie M 15 570110Metalliche M 18 570120steelPRES1) M 22 570130

M 28 570140M 35 570150

RBM Tita-gas TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480

RBM Tita-fix B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870F 16* 570715F 18* 570720F 20* 570725H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 14* 570760U 16* 570765U 18* 570770U 20* 570775

remo H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390

RIFENG U U 14* 570760PRESS FITTING U 16* 570765(F5) U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

RIFENG TH TH 16* 570460PRESS FITTING TH 20* 570470(F9) TH 25* 570495

TH 26* 570475TH 32 570480

RIQUIER RFz 12* 571320A SERTIR RFz 16* 571325

RFz 20* 571330RFz 25 571335

Rofix Climatrix H 16* 570320Rhinopex H 20* 570350

U 16* 570765U 20* 570775TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480

Roth RN 14* 572672RN 17* 572674RN 20* 572676RN 25/26 572678RN 32 572680RN 40 (PR-3S)3) 572714RN 50 (PR-3S)3) 572716RN 63 (PR-3B)3) 572836

Roth Nordic RN 16 572670Alu-LaserPlus/ RN 20 572676PressCheck2) RN 25/26 572678(DNK-NOR-SWE-FIN) RN 32 572680

RN 40 (PR-3S)3) 572714RN 50 (PR-3S)3) 572716

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO INOX M 28 570140

M 35 570150M 42 (4G) 570160M 54 (4G) 570170

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO STEEL M 28 570140

M 35 570150M 42 (4G) 570160M 54 (4G) 570170

Rubinetterie TH 14* 570455Bresciane TH 16* 570460Bonomi TH 18* 570465TURBO PRESS TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Rubinetterie TH 16* 570460Bresciane TH 20* 570470Bonomi TH 26* 570475TURBO PRESS TH 32 570480GASSa.MI plastic TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Sa.MI plastic TH 16* 570460Multistrato Gas TH 20* 570470

TH 26* 570475TH 32 570480

SANHA TH 14* 5704553fit-Press TH 16* 570460Serie 25000 TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 14* 570760U 16* 570765U 20* 570775U 32 570785U 40 570790

SANHA-Press SA 12 570930Chrom SA 15 570935Serie 16000 SA 18 570940

SA 22 570945SA 28 570950M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145

SANHA-NiroSan- SA 15 570935Presssystem SA 18 570940Serie 9000 SA 22 570945


SANHA-NiroSan- SA 15 570935Presssystem Gas SA 18 570940Serie 17000 SA 22 570945


SANHA-NiroSan- SA 15 570935Presssystem SA 18 570940Serie 19000 SA 22 570945(silicone free) SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SANHA- SA 12 570930Pressfittings SA 14 570932Serie 6000/ SA 15 570935Serie 8000 SA 16 570937

SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SANHA- SA 12 570930Pressfittings Gas SA 14 570932Serie 10000/ SA 15 570935Serie 11000 SA 16 570937

SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

137


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA- SA 12 570930Pressfittings SA 15 570935Solar SA 18 570940Serie 12000/ SA 22 570945Serie 13000 SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SANHA- SA 12 570930Pressfittings SA 15 570935Air SA 18 570940Serie 14000/ SA 22 570945Serie 15000 SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SANHA- SA 15 570935Pressfittings SA 18 570940Industrie SA 22 570945Serie 18000 SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SANHA SA 15 570935PURAPRESS SA 18 570940Serie 80000 SA 22 570945

SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 151) 570110M 181) 570120M 221) 570130M 281) 570140M 351) 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SANHA-Therm SA 12 570930Serie 24000 SA 15 570935

SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

SATEC SK VITerm TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 40 570790U 50 570795U 63 (S) 572365

Schlösser TH 16* 570460EUROPRESS- TH 20* 570470SYSTEM TH 26* 570475

TH 32 570480SCHÜTZ EHT TH 14* 570455rOpress TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

Schwer Fittings M 12 570100AQUApress M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170

Seppelfricke TH 16* 570460HENCO PRESS TH 20* 570470

TH 26* 570475HE 32 571900HE 40 571902

Seppelfricke V 12 570107Sudopress V 15 570115Edelstahl V 18 570125Visu-Control V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

Seppelfricke V 12 570107Sudopress Kupfer V 15 570115Visu-Control V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Seppelfricke V 15 570115Sudopress Kupfer V 18 570125Visu-Control V 22 570135Gas V 28 570145

V 35 570155V 42 570165V 54 570175

Seppelfricke V 15 570115Sudopress Kupfer V 18 570125Visu-Control V 22 570135SolarSeppelfricke TH 14* 570455Sudopress SKIN TH 16* 570460Visu-control TH 18* 570465


Seppelfricke M 12 570100XPress C-Stahl M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 15 570110XPress M 181) 570120Edelstahl M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 12 570100XPress Kupfer M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 15 570110XPress Kupfer M 181) 570120gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

SESTA TH 14* 570455SESTA GAS TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480

SESTA H 16* 570320Sistema H 20* 570350multistrato TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

SIKO TYPRO TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475

SIKO TH 14* 570455TYROTHERM TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475

SLOVARM U 16* 570765PEX-THERM U 20* 570775

H 26* 570370U 32 570785H 16* 570320H 20* 570350H 26* 570370H 32 570380

SOEMS TH 14* 570455sistema TH 16* 570460multistrato TH 18* 570465


SOEMS V 12 570107sistema rame e V 15 570115inox V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Standard U 16* 570765Hidráulica U 18* 570770MultiStandard U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365



138


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.STELBI TH 14* 570455POLIKRAFT TH 16* 570460


SURE HISPANIA RFz 16* 571325SURE-PRESS RFz 20* 571330

RFIz 25 571337RFIz 32 571342U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Systerm H 16 A* 570620WELCO-Gas H 20 A* 570650

H 26 A* 570670H 32 A 570680

Systerm H 14 A* 570610WELCO-Flex H 16 A* 570620

H 17 A* 570630H 20 A* 570650H 26 A* 570670H 32 A 570680H 40 A (4G) 570695

Systerm H 16 A* 570620WELCO-FloorSysterm H 16 A* 570620WELCO-Teck H 20 A* 570650

H 26 A* 570670TERMICALINE B 16* 570850Termipex B 20* 570860

B 26 570870B 32 570880H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

TermoConcept Basic E015) 571855TC-PRESSTHERMOLUTZ H 14* 570310acular/rapid H 16* 570320

H 17* 570330TE-SA TH 14* 570455TE-SA press TH 16* 570460serie 800 TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

THISA RFz 16* 571325Thisa multiplus RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790

THISA RFz 16* 571325Thisa Pex RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785

TIEMME TH 14* 570455COBRAPRESS TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

TIEMME RFz 16* 571325Serie 1700 PE-X RFz 20* 571330a pressare RFz 25 571335

RFz 32 571340TIEMME TH 16* 570460TIEMME Gas TH 20* 570470

TH 26* 570475THL 32 570487

TKM TH 14* 570455Systemtechnik TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

TRA U 16* 570765MULTITRAPRESS U 18* 570770


TRA TRAPRESS H 12* 570300H 16* 570320H 20* 570350H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340

Tréfimétaux Qtec TH 14* 570455TH 16* 570460TH 20* 570470

TWEETOP U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Ulrich H 14* 570310VARIOFLEX- H 16* 570320HAKAPRESS H 17* 570330

H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390

UNICAL AG U 16* 570765MAX MULTIPEX U 20* 570775

H 26* 570370U 32 570785

UNIDELTA TH 14* 570455Deltall TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 32 570785U 40 570790U 50 570795

Uponor Unipipe U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Uponor MLC UP 14* 572630UP 16* 572632UP 18* 572634UP 20* 572636UP 25 572638UP 32 572640U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Uponor MLC-D UP 16* 572632UP 20* 572636UP 25 572638UP 32 572640U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Uponor MLC-G2) UP 202) 572636UP 25 572638UP 32 572640

Valsir PEXAL H 14* 570310H 16* 570320H 20* 570350H 26* 570370H 32 V 570685

Valsir PEXAL Gas H 14* 570310H 16* 570320H 20* 570350H 26* 570370

Van Marcke Log. TH 16* 570460Tu-Bi-Pex TH 17* 570462

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Van Marcke Log. M 12 570100Tu-Bi-Press M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170

Variotherm TH 11,6* 570482System TH TH 16* 570460

Viega Copatin V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VR 76,1 (PR-3B)3) 572822VR 88,9 (PR-3B)3) 572823VR 108,0 (PR-3B)3) 572824

Viega Pexfit Fosta VX 16* 571635VX 20* 571640VX 25* 571645

Viega Pexfit VX 16* 571635Fosta G VX 20* 571640

VX 25* 571645Viega Pexfit Plus VX 12* 571630

VX 16* 571635VX 20* 571640

Viega Pexfit VX 16* 571635Pro Fosta VX 20* 571640

VX 25* 571645Viega Pexfit VX 16* 571635Pro Plus VX 20* 571640Viega Prestabo V 12 570107

V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815VF 76,1 (PR-3B)3) 572816VF 88,9 (PR-3B)3) 572817VF 108,0 (PR-3B)3) 572818

Viega Profipress V 12 570107VG 14 570132V 15 570115VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815

Viega V 12 570107Profipress G V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815

Viega V 12 570107Profipress S V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155

Viega V 12 570107Profipress Therm V 15 570115

V 18 570125V 22 570135

Viega ProPress VUS ½” 571770System USA VUS ¾” 571775

VUS 1” 571780VUS 1¼” 571785VUS 1½” 571790VUS 2” 571795VUSF 2½” (PR-3B)3) 4) 572819VUSF 3” (PR-3B)3) 4) 572820VUSF 4” (PR-3B)3) 4) 572821

Viega Propress VAU 15 (OD 12,7 mm) 572687WATER System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691


Viega PropressG VAU 15 (OD 12,7 mm) 572687GAS System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691


Viega VP 16* 570910Sanfix Fosta2) VP 20* 570915

VP 25* 570920VP 32 570925

Viega VP 16* 570910Sanfix Plus VP 20* 570915Viega Sanpress V 12 570107

V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VR 76,1 (PR-3B)3) 572822VR 88,9 (PR-3B)3) 572823VR 108,0 (PR-3B)3) 572824

Viega V 15 570115Sanpress Inox V 18 570125


139


System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Viega V 15 570115Sanpress Inox G V 18 570125


Viessmann TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

VSH Benelux U 14* 570760VSH MultiPress U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790

VSH Benelux M 12 570100XPress Carbon M 15 570110


VSH Benelux M 15 570110XPress Copper M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH Benelux M 15 570110XPress Copper M 181) 570120GAS M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH Benelux M 15 570110XPress Copper M 181) 570120Solar M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH Benelux M 15 570110XPress Stainless M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH Fittings M 12 570100XPress Carbon M 15 570110


VSH Fittings M 15 570110XPress Stainless M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Walter Meier U 16* 570765Metalplast U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Watts MTR TH 16* 570460Art press TH 20* 570470

TH 26* 570475TH 32 570480

WATTS US ⅜”* 571450RADIANT US ½”* 571455Watts WaterPEX US ¾”* 571460

US 1”* 571465US 1 ¼” 571470US 1 ½” 571475

WATTS US ⅜”* 571450RADIANT US ½”* 571455Watts US ¾”* 571460RadiantPEX US 1”* 571465

US 1 ¼” 571470US 1 ½” 571475

WATTS U 16 (½”) 570765RADIANT U 20 (⅝”) 570775Watts U 25 (¾”) 570780RadiantPEX-AL U 32 (1”) 570785Wavin U 14* 570760Tigris K1 U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795

Wavin U 14* 570760Tigris M1 U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795

WeeConPress M 12 570100C-Stahl M 15 570110


WeeConPress M 12 570100Inox M 15 570110


WeeConFlex TH 16* 570460MVR TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

WEFA PLASTIC H 16* 570320WEFATHERM- H 20* 570350PRESS H 26* 570370

H 32 570380WEM H 16* 570320

U 16* 570765WIELAND TH 14* 570455cuprotherm TH 16* 570460CTX TH 18* 570465

TH 20* 570470TH 26* 570475

Winkler TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400

WKS-Press TH 14* 570455TH 16* 570460TH 17* 570462TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

XtraConnect F 16* 570715F 20* 570725F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(NW 26) U 25* 570780U 32 570785

Zetaesse TH 14* 570455Multistrato TH 16* 570460EUROPEX TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775

Zetaesse TH 14* 570455Multistrato TH 16* 570460ISOPEX TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775

Zetaesse Rame TH 14* 570455HydroSAN TH 16* 570460

TH 20* 570470U 14* 570760U 16* 570765U 20* 570775

Zetaesse Rame TH 14* 570455ThermoSAN TH 16* 570460

TH 20* 570470U 14* 570760U 16* 570765U 20* 570775

ZEWOTHERM TH 12* 570452TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

ZURN US ⅜”* 571450INDUSTRIES US ½”* 571455ZURN PEX US ¾”* 571460

US 1”* 571465US 1 ¼” 571470US 1 ½” 571475US 2 ” 571477



140


Accessories

Description Art.-No.Adapter tong Z2 For driving REMS pressing rings (PR-3S) 42–54 mm 572795Adapter tong Z4 For driving REMS pressing rings (PR-3B) 75 mm 572801Adapter tong Z5 For driving REMS pressing rings (PR-3B) VF/VR 64 – 108 mm and VUSF/VUSR 2½ – 4” 572802Steel case with insert for 6 pressing tongs (up to Ø 35 mm/1” and pressing tongs U 40, U 50, TH 40, F 40, F 50, G 40, VUS 1¼”)/cropping tongs and compartment for pipe cutter up to 42 mm 570295Steel case with insert for 2 pressing tongs (M 42 (4G), M 54 (4G), V 42, V 54, H 40, H 40 A, VUS 1½”, VUS 2”) 570290Steel case with insert for adapter tongs with pressing rings M 42 (PR-3S) and M 54 (PR-3S) or with pressing rings SA 42 (PR-3S) and M 54 (PR-3S). 572810Steel case with inlay for adapter tongs and 4 pressing rings (PR-3B) VF 64.0 – 108.0 mm/VR 76.1 – 108.0 mm/VUSF 2½ – 4”/VUSR 2½ – 4” 572809

REMS pressing tong with two pivoted mono block pressing jaws. Top-selling standard version.

REMS pressing tong (S) with one fixed and two pivoted pressing segments, for midsize dimensions.

REMS pressing tong (4G) with two pivoted, parallel aligned pressing segments for linear pressing of midsize dimensions.

REMS pressing ring (PR-3S) with 3 swivellable pressing segments mounted on a jointed ring for large dimension complex pressings. Ideal pressing through radially controlled movement of pressing segments, with adapter tong.

REMS pressing rings (PR-3B) with 3 pressing segments for high quality, large dimension pressings Optimum pressing by radially controlled movement of the pressing segments with adaptor tongs.

ZVSHK

141

Confirmation of suitability


potable water

gas

The suitability of crimping tools is determined basically by the manufacturer of crimping tools. Moreover the suitability of REMS crimping tools has been confirmed by the system manufacturer/supplier himself or approved through independent testing institutes.

Confirmation of suitability through the system manufacturer/supplierMore than 90 % of the manufacturers/suppliers of the pressfitting systems listed herein have tested REMS pressing tongs and confirmed the suitability for their pressfitting system.

Confirmation of suitability through independent testing institutesThe suitability of REMS pressing tongs for additional pressfitting systems have been confirmed through independent technical institutes:

TÜV-CertificatesAvailable for Geberit Mepla, Geberit Mapress C-STAHL, Geberit Mapress EDELSTAHL, Geberit Mapress Kupfer, Nussbaum Cupress, Nussbaum Optipress, Uponor Unipipe, Viega-’profipress’, Viega-’profipress G’, Viega-’sanfix P’, Viega-’sanpress’, Viega-’Viegatherm P’, Wavin Tigris. The TÜV-certificates confirm that REMS crimping tools are suitable for producing perfect and system-conformity pressing joints corresponding to these systems.

Suitability test according to DVGW W 534 (portable water)Pressing joints produced with REMS pressing tools were tested by the state-operated material testing institute in Darmstadt/Germany or the material testing institute of the Land of North-Rhine-Westphalia, Germany according to DVGW work sheet W 534. These material testing institutes are certified by the DVGW for making these tests. A representative cross-section of press joints of press fitting systems Geberit Mapress Edelstahl, Uponor Unipipe and Viega-’profipress’ was tested. The tests led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems.

Eignungsprüfung nach DVGW VP 614 / 625 or prEN 1254-7 (Gas)Pressing joints made with REMS pressing tools have been tested by the TÜV or by the Land Material Testing Institute Nordrhein-Westfalen or the DVGW Research Institute Karlsruhe according to DVGW Regulations VP 614/625 or by the BSI (UK) according to prEN 1254-7. A representative cross-section of pressing joints of the pressfitting systems Geberit Mapress Edelstahl Gas, Geberit Mapress Kupfer Gas, Henco Gas, IBP >B<press Gas, Pegler Yorkshire X-Press Copper Gas, Uponor MLC-G, Viega-’profipress G’, Viega-’sanpress INOX G’, Viega-’propress G GAS’ (AUS) was tested. The tests led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems.

ZVSHK

142

Hold-Harmless and Indemnification Agreement

A hold-harmless and indemnification agreement exists with the:

Zentralverband Sanitär Heizung Klima (Central Organization for the Sanitary-,� Heating- and Climatization Industries),�Rathausallee 6, D-53757 St. Augustin,referred to in the following as ”ZVSHK”,

Bundesindustrieverband Technische Gebäudeausrüstung e.V.,Hinter Hoben 149, 53129 Bonn,referred to in the following as ”BTGA”,

Verband Deutscher Kälte-Klima-Fachbetriebe e. V. (German Association for Coolant & Air-Conditioning Profession Industries),� Kaiser-Friedrich-Straße 7, D-53113 Bonn,referred to in the following as ”VDKF”,

Schweizerisch-Liechtensteinischem Gebäudetechnikverband (Swiss-Liechtenstein Technical Building Association),�Auf der Mauer 11, CH-8023 Zürich, referred to in the following as ”suissetec”,

The Zentralverband Sanitär Heizung Klima (ZVSHK), the Bundesindustrieverband Technische Gebäudeausrüstung e. V. (BTGA), the Verband Deutscher Kälte-Klima- Fachbetriebe e. V. (VDKF) and the Schweizerisch-Liechtensteinische Gebäude-technikverband (suissetec) have made liability acceptance agreements in the interests of trade and industry with REMS-WERK Christian Föll und Söhne GmbH (REMS) for the radial pressing tools.

■ Manual radial press REMS Eco-Press■ Cordless radial press REMS Mini-Press ACC■ Electric radial press REMS Power-Press E■ Electro-hydraulic radial press REMS Power-Press■ Electro-hydraulic radial press REMS Power-Press ACC■ Cordless radial press REMS Akku-Press■ Cordless radial press REMS Akku-Press ACC■ REMS pressing tongs (pressing jaws)■ REMS pressing tongs Mini (pressing jaws).

This makes REMS the first system-independent machine- and tool manufacturer to have concluded a hold-harmless and indemnification agreement for pressing tools. The conclusion of the agreement was effected on the basis of a successful cooperation established on partnership between REMS, the crafts, trades and industry and their organizations.

Eligible for services and performances from this agreement are all independent professional craftsmen, and companies of such, who are enrolled in the register of artisans and craftsmen (referred to in the following as ”SHK-Establishments”), in as far as they have been members of the crafts guild of the sanitary- heating- and climatization enterprises competent for their business location at the time the damage event has arisen, and this crafts guild is associated with a regional guild asso ciation, which is a member of the ZVSHK.

Entitled to the services from the agreement with the BTGA are all building tech-nology companies (hereinafter referred to as “TGA companies” ) insofar as they were a member of the Bundesindustrieverband Technische Gebäudeausrüstung responsible at the seat of their company at the time of the damage case and therefore an indirect member of the BTGA or direct member of the BTGA.

Eligible for services and performances from this agreement with the VDKF are all coolant systems companies or professional organisations (referred to as Coolant and Air-Conditioning Profession Industries) who, at the time the damage is caused, are members of the VDKF.

Eligible for services and performances from this agreement are all building systems companies (following TGA companies) who, at the time the damaged is caused, are members of suissetec.

In as far as the radial pressing tools mentioned show a defect with regard to construction, manufacture or material, or if the operator’s manuals are faulty, thereby causing damage for the customer of the SHK-establishment, the Coolant and Air-Conditioning Profession Industries, or the TGA-companies, for which the SHK-establishment or the TGA-company is liable, then REMS shall be additionally liable - aside of the statutory prescriptions – for the consequences resulting from leakage, in accordance with the stipulations and provisions of this hold-harmless agreement.

The hold-harmless and indemnification agreement shall be independently valid, regardless of which pressfitting system is pressed with the REMS pressing tools. The current status regarding suitability of the REMS pressing tools for pressfitting systems can be viewed on the Internet: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.

Please consult Mr. Walter Hindelang for further information: [email protected].

Reliable and safe: REMS is the first system-independent machine and tool manufacturer who negotiated a hold-harmless and indemnification agreement for press tools.


143

REMS cropping tongs

REMS cable shear

Accessories for REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes

Accessories for REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes



High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to hardness classification 4.8 (400 N/mm2) M 6 – M 12

REMS cropping tong – for cutting threaded rods. Made of forged and specially hardened steel. Reversible cropping inserts for double service life.M cropping inserts with high precision thread contour machined on CNC machining centres for exact guiding of the threaded rod in the cutting process Pliers parts, cropping inserts and specially machined and hardened cutting edges, made to fit exactly, for cutting without burr Threaded rod can be screwed into a threaded connection of the pipe clip or the nut without rework after cutting Cutting device in pliers design (Patent EP 1 459 825,� patent US 7,�284,�330). Drive through all REMS radial presses (except radial presses Mini) and through suitable radial presses of other makes. All cropping tongs marked with * have an optional connection (Patent EP 1 223 008,� patent US 6,�739,�172) for manual drive through the radial press REMS Eco-Press.

High-grade cable shear in forged and specially hardened steel for cutting electric cable.Electric cable ≤ 300 mm² (Ø 30 mm)

REMS cable shear – Easy cutting of electric cable. Made of forged and specially hardened steel. Replaceable cutting blades manufactured on CNC production centres ensure a precision blade geometry and long service life. Large cutting range.Drive through electric REMS radial presses (except REMS Mini-Press ACC) and through suitable radial presses of other makes.

Accessories

Description for threaded rods Art.-No.Cropping insert M 6 (pair) M 6 571891Cropping insert M 8 (pair) M 8 571896Cropping insert M 10 (pair) M 10 571866Cropping insert M 12 (pair) M 12 571871Steel case with insert for 6 cropping tongs/pressing tongs and compartment for pipe cutter up to 42 mm 570295

Supply formatREMS cropping tong. Cropping tong with reversible cropping inserts for steel, stainless steel, M 6 – M 12. In cardboard box.Description for threaded rods Art.-No.REMS cropping tong M 6* M 6 571890REMS cropping tong M 8* M 8 571895REMS cropping tong M 10 M 10 571865REMS cropping tong M 12 M 12 571870

Supply formatREMS cable shear. Cable shear with replaceable blades (2 pcs.) for electric cable ≤ 300 mm² (Ø 30 mm). In cardboard box.

Art.-No.571887

Accessories

Description Art.-No.Blades (2 pieces) 571889

Patent EP 1 223 008 Patent US 6,739,172Patent EP 1 459 825 Patent US 7,284,330

145

151

148

149

146

Cordless axial press 40Compression heads

Manual axial press

Compression heads

Cordless axial press 25 / 25 L

Axial Press Jointing

146

REMS Ax-Press 25 / 25 L ACC Cordless axial press with automatic return

Compact, handy electric tool for producing compression sleeve joints and for expanding tubes. For battery and corded operation. For trade and industry. For the building site and the workshop.Axial compression Ø 12 – 40 mm

REMS Ax-Press 25 ACC – universal up to Ø 40 mm. Super light, super handy. Fast. With automatic return. Optimum weight distribution for single-hand operation. Swivelling compression device. System advantageOnly one type of compression heads for REMS Ax-Press HK, REMS Ax-Press H, REMS Ax-Press 25 and REMS Ax-Press 25 L. Thus easy, economic stocking.

Compression heads for all common systemsFull range of REMS compression heads for all common compression sleeve systems (page 149 – 150). Choice of REMS compression heads with spring lock for seating common compression inserts. High-grade compression heads in forged and specially hardened steel. The REMS compression heads are system-specific and meet the demands of compression sleeve systems. Thus perfect system-conformity, safe jointing.

Expander heads for all common systemsComplete assortment of REMS expander heads for all common compression sleeve systems. The REMS compression heads are system-specific and correspond to the respective compression sleeve system. Thus perfect system-conformity, precise expanding.

Design Compact, handy, light. REMS Ax-Press 25 drive machine with battery weighs only 2.9 kg, only 29 cm long REMS Ax-Press 25 L drive machine with battery weighs only 3.1 kg, only 32 cm long REMS Ax-Press 25 and REMS Ax-Press 25 L with 40 mm stroke respectively REMS Ax-Press 25 with preset compression head position for pressing compression sleeve connectors with a clamping distance ≤ 82 mm in one action REMS Ax-Press 25 L with selectable compression head position for pressing compression sleeve connectors with a clamping distance ≤ 116 mm in one action and for double pressings. Works anywhere, free-hand, overhead, in confined areas. Optimum weight distri bution for single-hand operation. Ergonomically shaped housing with recessed grip. Swivelling compression device for working in confined area. Extension for enlarging the clamping distance on the pressing sleeve con nector, also for double pressings, as an accessory. Compression heads quickly interchangeable, without tools. Secure spring lock seating of compression heads. For battery and corded operation. Electronic charging status check with flat battery protection and charging status indicator with 2-coloured LED.

DriveEnormous pressing force for fast and perfect jointing. Powerful electro-hydraulic drive with automatic return (ACC), eccentric reciprocating pump with robust planetary gear. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 420 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.

Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 1.6 or 3.2 Ah capacity for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V voltage supply for mains operation instead of Li-Ion 14.4 V battery, as accessory.

ExpandingVarious pipe expanders and complete range of REMS expanding heads for all common pressure sleeve systems




e.g. aquatherm,Brasstech,General Fittings,IVT,Prandelli,REHAU,REVEL,ROTEX, TECE,Würth

e.g. AC-FIX, Barbi,EUROP´FLUIDESMAXITUB,SURE HISPANIA,THISA

147

Supply formatREMS Ax-Press 25 ACC Basic-Pack. Cordless axial press for producing compression sleeve joints Ø 12 – 40 mm. 40 mm stroke, for pressing compression sleeve connections with a clamping distance ≤ 82 mm. For driving REMS pressing heads. Electro-hydraulic drive with powerful battery motor 14,4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system, safety tip switch, swivelling pressing device. Battery Li-Ion 14.4 V, 1.6 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 50 W. Without compression heads. In sturdy steel case.

Art.-No.573033


Supply formatREMS Ax-Press 25 L ACC Basic-Pack. Cordless axial press for producing compression sleeve joints Ø 12 – 40 mm. 40 mm stroke, for pressing compression sleeve connections with a clamping distance ≤ 116 mm. For driving REMS pressing heads. Electro-hydraulic drive with powerful battery motor 14,4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system, safety tip switch, swivelling pressing device. Battery Li-Ion 14.4 V, 1.6 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 50 W. Without compression heads. In sturdy steel case.

Art.-No.573034


REMS Ax-Press 25 / 25 L ACC Cordless axial press with automatic return

Description Art.-No.REMS compression heads see page 149 – 150.

Expander heads P see page 159.

REMS Ax-Press 25 ACC drive unit, without battery 573003REMS Ax-Press 25 L ACC drive unit, without battery 573004REMS Akku-Ex-Press P ACC drive unit, without battery 575008Battery Li-Ion 14,4 V, 1.6 Ah 571545Battery Li-Ion 14.4 V, 3.2 Ah 571555Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560Voltage supply Li-Ion 230 V for mains operation instead of battery Li-Ion 14.4 V. 571565Steel case with insert 578290Steel case with inlay for cordless axial press and cordless pipe expander 573284REMS cordless LED lamp see page 89 175200

Accessories

Combi SetSpace and weight saving Combi Set, consisting of REMS Ax-Press 25 ACC and REMS Akku-Ex-Press P ACC For fast and simple expanding of pipes and pressing of compression sleeve connectors with a clamping distance of ≤ 82 mm For details of the REMS Akku-Ex-Press P ACC. see page 157. Advantage: only 1 steel case for REMS Ax-Press 25 ACC and REMS Akku-Ex-Press P ACC, expanding heads and compression heads Price advantage.

Supply formatREMS Ax-Press 25 ACC / Akku-Ex-Press P ACC Combi Set Basic. Space and weight saving Combi Set, consisting of REMS Ax-Press 25 ACC drive machines for producing compression sleeve connections Ø 12 – 40 mm, with 40 mm stroke, for pressing compression sleeve connectors with a clamping distance of ≤ 82 mm and REMS Akku-Ex-Press P ACC for fast expanding of plastic and composite tubes Ø 12 – 40 mm. 2 Li-ion 14.4 V, 1.6 Ah batteries, Li-ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W rapid charger. Without compression heads. Without expanding heads. In sturdy steel case.

Art.-No.573035


148

REMS Ax-Press HK / H One-hand axial press / Manual axial press

Patent ES 2 273 563Patent FR 05 03513Patent DE pending

Universal manual axial press for producing compression sleeve joints.Axial compression Ø 12 – 32 mm

REMS Ax-Press HK – universal up to Ø 22 mm Ultra small, ultra light, ultra handy. Only 1.1 kgREMS Ax-Press H – universal up to Ø 32 mm. Handy and light. Only 1.4 kg.Complete assortment of REMS compression heads, quickly interchangeable. System advantageOnly one type of compression heads for REMS Ax-Press HK, REMS Ax-Press H, REMS Ax-Press 25 and REMS Ax-Press 25 L. Thus easy, economic stocking.

Compression headsFull range of REMS compression heads for all common compression sleeve systems (page 149 – 150). Choice of REMS compression heads with spring lock for seating common compression inserts. High-grade compression heads in forged and specially hardened steel. The REMS compression heads are system-specific and meet the demands of compression sleeve systems. Thus perfect system-conformity, safe jointing.

DesignCompact, job site proven. Handy and light. REMS Ax-Press HK drive unit only 1.1 kg. REMS Ax-Press H drive unit only 1.4 kg. Works any where, free-hand, also in tight spots. 66 mm stroke. Quick-acting forward and release for easy, fast operation. Selectable compression head position (Patent ES 2 273 563,� Patent FR 05 03513,� Patent DE pending) for pressing compression sleeve connectors with a clamping distance of ≤ 161 mm in one action and for double pressings. Quick-change compression heads and pressing inserts without tools. Secure fit of compression heads and pressing inserts by spring catch.

ExpandingVarious pipe expanders and complete range of REMS expanding heads for all common compression sleeve systems (page 156 – 159).


Accessories

Description Art.-No.REMS compression heads see page 149 – 150.Carrying bag for REMS Ax-Press HK/H drive unit and compression heads 574437Case with inlay for REMS Ax-Press HK drive unit and compression heads 574352

Supply formatREMS Ax-Press HK drive unit. Axial press for single-handed operation for producing compression sleeve joints Ø 12 – 22 mm. 66 mm stroke. With quick-acting forward and release. For driving REMS compression heads. In cardboard box.

Art.-No.574302

Supply formatREMS Ax-Press H drive unit. Manual axial press for producing compression sleeve joints Ø 12 – 32 mm. 66 mm stroke. With quick-acting forward and release. For driving REMS compression heads. In cardboard box.

Art.-No.574300

e.g. AC-FIX, aquatherm,Barbi,Comap,PB TUB, RIQUIER, ROTEX, SURE HISPANIA,TECE, THISA, VELTA-EUROJAUGE

149

REMS compression headsAccessories for REMS Ax-Press HK, REMS Ax-Press H, REMS Ax-Press 25, REMS Ax-Press 25 L

Commercially available press inserts:

Dm 16

Dm 20

Dm 22

Dm 25

Dm 32

T’s and elbows

REMS compression heads with spring lock for commercially available press insertsDescription UseCompression head Basic 20 (set) for pipe fittings 20 mm and for

standard press inserts outer Ø 20 mmCompression head Basic 25 (set) for pipe fittings 25 mm and for

standard press inserts outer Ø 25 mmCompression head Basic 32 (set) for pipe fittings 32 mm and for

standard press inserts outer Ø 32 mm

REMS compression head for T-pieces, elbows, splitters, transition piecesDescription UseCompression head UNI T/L (piece)

for T-pieces, elbows, splitters, in combination with an additional compression head; for transition pieces, in combination with a support bol

REMS support bolt for transition piecesDescription for transition pieces

inchArt.-No.

Support bolt ⅜”� ⅜ 573647Support bolt ½”� ½ 573648Support bolt ¾”� ¾ 573649

150

REMS compression headsAccessories for REMS Ax-Press HK, REMS Ax-Press H, REMS Ax-Press 25, REMS Ax-Press 25 L

Select compression heads yourself!Search for the required compression sleeve system in the table below and select the correct compression heads.High-grade compression heads in forged and specially hardened steel. Quickly interchangeable, without tools. The REMS compression heads are system-specific and comply with the requirements of the respective compression sleeve system. Thus perfect system- conformity, safe jointing. Drive through REMS axial presses.

Compr. heads Uni Compr. head UNI T/L Compr. heads Basic for press inserts

Pressure sleeves system

Compression head mm

Set/ piece

fits REMS Ax-Press

Art.-No.

HK1) H 25 25 LAC-FIX UNI 12 1/2 ● ● ● 573630(Global Piping UNI 16 1/2 ● ● ● 573632System) UNI 20 1/2 ● ● ● 573636

UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

aquatherm AT 16 1/2 ● 573120AT 20 1/2 ● 573122AT 25 1/2 ● 573124AT 32 1/2 ● 573126AT 40 1/2 ● 573128

BRASELI UNI 12 1/2 ● ● ● 573630UNI 16 1/2 ● ● ● 573632UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

Brass & Fittings UNI 16 1/2 ● ● ● 573632UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

Brasstech Raptor/ ME 14 1/2 ● 573100Metalpex/ ME 16 1/2 ● 573102Raptor 2/ ME 20 1/2 ● 573106MULTItermoSAN ME 26 1/2 ● 573108COMAP PEXY UNI 12 1/2 ● ● 573630

UNI 16 1/2 ● ● 573632UNI 20 1/2 ● ● 573636UNI 25 1/2 ● 573640UNI 32 1/2 ● 573644UNI T/L** 0/1 ● ● 573646Basic 25* 1/2 ● ● 573616Basic 32* 1/2 ● ● 573628

EUROP´FLUIDES UNI 12 1/2 ● ● ● 573630HYDROFLUIDES UNI 16 1/2 ● ● ● 573632

UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

Fittings Estándar UNI 12 1/2 ● ● ● 573630UNI 16 1/2 ● ● ● 573632UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

General Fittings RE 16 1/2 ● 573160Serie 3400 RE 20 1/2 ● 573162

RE 25 1/2 ● 573172RE 32 1/2 ● 573178

General Fittings TC 12/14/16 1/2 ● 573360Serie 3700 TC 18/20 1/2 ● 573364

TC 25 1/2 ● 573367TC 32 1/2 ● 573370

General Fittings ME 14 1/2 ● 573100Serie 5400 ME 16 1/2 ● 573102

ME 20 1/2 ● 573106ME 26 1/2 ● 573108

Industrial Blansol UNI 18 1/2 ● ● 573634Barbi Gladiator UNI 22 1/2 ● ● 573638

UNI 26 1/2 ● ● 573642UNI 32 1/2 ● ● 573644UNI 40 1/2 ● 573652UNI T/L** 0/1 ● ● 573646Basic 20* 1/2 ● ● 573624Basic 25* 1/2 ● ● 573616Basic 32* 1/2 ● ● 573628

Industrial Blansol UNI 12 1/2 ● ● ● 573630Barbi Reticulado UNI 16 1/2 ● ● ● 573632

UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI 40 1/2 ● 573652UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● 573628

IVT PRINETO IV 16 1/3 ● 573320IV 20 1/3 ● 573325IV 25 1/3 ● 573330IV 32 1/3 ● 573335

Pressure sleeves system

Compression head mm

Set/ piece

fits REMS Ax-Press

Art.-No.

HK1) H 25 25 LISOLTUBEX UNI 12 1/2 ● ● ● 573630

UNI 16 1/2 ● ● ● 573632UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

MAXITUB UNI 12 1/2 ● ● ● 573630MAXIFIX UNI 16 1/2 ● ● ● 573632

UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● 573628

PB TUB UNI 12 1/2 ● ● 573630Sertigliss UNI 16 1/2 ● ● 573632

UNI 20 1/2 ● ● 573636UNI 25 1/2 ● 573640UNI 32 1/2 ● 573644UNI T/L** 0/1 ● ● 573646Basic 25* 1/2 ● ● 573616Basic 32* 1/2 ● ● 573628

PLÁSTICOS UNI 16 1/2 ● ● ● 573632FERRO UNI 20 1/2 ● ● ● 573636FERROPLAST UNI 25 1/2 ● ● 573640

UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

REHAU RH 12 1/2 ● 573164RAUTHERM RH 16 1/2 ● 573166(série S 5) RH 20 1/2 ● 573170

RH 25 1/2 ● 573154RH 32 1/2 ● 573156

REHAU RH 17 1/2 ● 573168RAUTHERM S RH 20 1/2 ● 573170(REHAU HAS) RH 25 1/2 ● 573154

RH 32 1/2 ● 573156REHAU RE 16 1/2 ● 573160RAUTITAN RE 20 1/2 ● 573162PX/MX/SX/RX/ RE 25 1/2 ● 573172gas/sprinkler RE 32 1/2 ● 573178

RE 40 1/2 ● 573176REHAU (GBR) RH 16 1/2 ● 573166EVERLOC RH 20 1/2 ● 573170

RH 25 1/2 ● 573154RH 32 1/2 ● 573156

REVEL RV 16 1/2 ● 573400RV 20 1/2 ● 573402RV 25 1/2 ● 573404RV 32 1/2 ● 573406

Riquier à UNI 12 1/2 ● ● 573630glissement UNI 16 1/2 ● ● 573632

UNI 20 1/2 ● ● 573636UNI 25 1/2 ● 573640UNI 32 1/2 ● 573644UNI T/L** 0/1 ● ● 573646Basic 25* 1/2 ● ● 573616

ROTEX RO 12 1/2 ● ● 573180RO 16 1/2 ● ● 573184RO 20 1/2 ● ● 573186RO 25 1/2 ● ● 573188RO 32 1/2 ● ● 573190

SURE HISPANIA UNI 12 1/2 ● ● ● 573630SURE-CAS UNI 16 1/2 ● ● ● 573632

UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

TECE TECEflex TC 12/14/16 1/2 ● ● ● 573360TC 18/20 1/2 ● ● ● 573364TC 25 1/2 ● ● 573367TC 32 1/2 ● ● 573370

TERSIA-Pex IV 16 1/3 ● 573320IV 20 1/3 ● 573325IV 25 1/3 ● 573330IV 32 1/3 ● 573335

THISA plus UNI 12 1/2 ● ● ● 573630THISA PEX UNI 16 1/2 ● ● ● 573632

UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI 32 1/2 ● ● 573644UNI T/L** 0/1 ● ● ● 573646Basic 20* 1/2 ● ● ● 573624Basic 25* 1/2 ● ● ● 573616Basic 32* 1/2 ● ● ● 573628

Velta UNI 12 1/2 ● ● ● 573630Eurojauge UNI 16 1/2 ● ● ● 573632

UNI 20 1/2 ● ● ● 573636UNI 25 1/2 ● ● 573640UNI T/L** 0/1 ● ● ● 573646Basic 25* 1/2 ● ● ● 573616

Würth PRINETO IV 16 1/3 ● 573320IV 20 1/3 ● 573325IV 25 1/3 ● 573330IV 32 1/3 ● 573335

Compression heads for additional compression sleeve systems on request.1) For producing compression sleeve connection of Ø 12 – 22 mm.* Compression heads with spring lock Compression head Basic 20 (set) for pipe fittings 20 mm and for

standard press inserts outer Ø 20 mm Compression head Basic 25 (set) for pipe fittings 25 mm and for

standard press inserts outer Ø 25 mm Compression head Basic 32 (set) for pipe fittings 32 mm and for

standard press inserts outer Ø 32 mm** Compression head for T-pieces, elbows, splitters, transition pieces Compression head UNI T/L (set) for T-pieces, elbows, splitters, in combination

with an additional compression head; for transition pieces, in combination

with a support bolt, see page 149.

151

REMS Ax-Press 40 Cordless axial press

Patent US 6,415,641

Compact, handy electric tool for producing compression sleeve joints with crimping sleeve. For trade and industry. For the building site and the workshop.Axial compression Ø 12 – 32 mm

REMS Ax-Press 40 Li-Ion – up to Ø 32 mm. Complete assortment of REMS compression heads for all common compression sleeve systems with crimping sleeve. High-grade compression heads in forged and specially hardened steel. The REMS compression heads are system-specific and correspond to the respective compression sleeve system. Thus perfect system-conformity, safe jointing.

DesignCompact, handy, light. Drive unit with battery only 5.5 kg. Vertically from the drive unit located pressing device for seating the compression heads (Patent US 6,�415,�641). Works anywhere, free-hand, over head, in confined areas. Optimum weight distribution for single-hand operation. Ergonomically shaped housing with recessed grip. Swivelling compression device for working in confined area. Com-pression heads and expander heads quickly interchangeable, without tools. Secure spring lock seating of compression heads. For battery and corded operation. Electronic charging status check with flat battery protection and charging status indicator with 2-coloured LED.

DriveEnormous pressing force for fast and perfect jointing. Powerful electro-hydraulic drive, eccentric reciprocating pump with robust planetary gear. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system.Safety tip switch.

Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 3.2 Ah capacity, for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range – 10 to + 60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V voltage supply for mains operation instead of Li-Ion 14.4 V battery, as accessory.

Supply formatREMS Ax-Press 40 Set. Cordless axial press for producing compression sleeve joints with crimping sleeve Ø 12 – 32 mm. Electro-hydraulic drive with powerful battery motor 14.4 V, 380 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system, safety tip switch, swivelling com-pression device. Battery Li-Ion 14.4 V, 3.2 Ah, rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W. REMS compression heads (sets) corresponding to the respec-tive compression sleeve system. In sturdy steel case.Description Compression sleeve system Art.-No.Set ME 16-20-26 CONVAL, Brasstech Raptor/

Metalpex/Raptor 2/MULTItermo-SAN, Genral Fittings Serie 5400, Georg Fischer pfci ALUPEX-EX-PRESS/Alupex Gas-System 573061

Set LR 20-22-25 Logstor 573064Basic-Pack without compression heads 573060


Accessories

e.g. Brasstech CONVALGeneral Fittings Georg Fischer pfci Logstor

REMS compression headsCompression sleeve system Compression head (set) Art.-No.Brasstech Raptor/ Metalpex/ Raptor 2/ MULTItermoSAN

ME 14 573100ME 16 573102ME 20 573106ME 26 573108

CONVAL ME 14 573100ME 16 573102ME 20 573106ME 26 573108

General Fittings Serie 5400

ME 14 573100ME 16 573102ME 20 573106ME 26 573108

Georg Fischer pfci ALUPEX-EXPRESS/ Alupex Gas System

ME 14 573100ME 16 573102ME 20 573106ME 26 573108

REMS compression headsCompression sleeve system Compression head (set) Art.-No.Logstor ME 16 573102

LR 20 573430LR 22 573432LR 25 573434LR 28 573436LR 32 573438

Description Art.-No.REMS Ax-Press 40 Li-Ion drive unit, without battery 573006Battery Li-Ion 14.4 V, 3.2 Ah 571555Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560Voltage supply Li-Ion 230 V for mains operation instead of battery Li-Ion 14.4 V. 571565Steel case with insert 573282REMS cordless LED lamp see page 89 175200

Date post:	03-Feb-2022
Category:	Documents
Upload:	others
View:	16 times
Download:	0 times

Radial Press Jointing

Documents