Radiators - MYSON : Heating Through Innovation ! s old cast iron steam radiator on a cold winter...

heatingthroughinnovation.

RadiatorsMyson panel radiators are a superior option to fin-tube baseboard in comfort, convenience and efficiency.

MysonComfort.com

Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com2

MYSON Radiators vs. Fin Tube Baseboard

COMFORT — Myson Radiators deliver heat in two ways and enhance your comfort throughout the heating season.

Radiant heat is delivered directly from the radiator panels to you. Think of that pleasant feeling of satisfying warmth that you get by sitting around a wood stove or grandma’s old cast iron steam radiator on a cold winter day.

1.

Convective heat is delivered by warming the air creating a low to high air flow covering your outside walls and windows to create an envelope of warmth.

2.

Conventional fin tube baseboards work by convection only, delaying the warming of the room and depriving you of the comforting warmth that only radiant heating can provide.

EFFICIENCY — Myson Radiators start heating immediately after hot water (at a lower water temperature) begins circulating though them. This fast heat delivery shortens the run time of your boiler, providing real fuel savings.Fin tube baseboards, with their inefficient (needs 180° F water) and slow heat delivery, take longer to heat your home and cost you more money for heating fuel.

SPACE — Myson Radiators occupy only a fraction of the wall space compared to fin tube baseboard. As a result, you gain more space and flexibility for your interior design and furniture placement.

DURABILITY — Myson Radiators are constructed of heavy gauge steel with a durable epoxy polyester powder coat finish strong enough to stand up to years of use, while maintaining their functionality and new appearance.

A fin tube baseboard’s thin sheet metal covers are easily damaged by vacuum cleaners, children’s toys, and rusting in damp environments — especially bathrooms — and do not stand up to the rigors of modern family life.

DESIGN CHOICE — Myson Radiators are available in a variety of sizes and designs, ranging from traditional to modern, accommodating all your interior decorating creations.

The traditional fin tube baseboard has no design appeal.

EASE OF CLEANING — Mounted off the floor, Myson Radiators make vacuuming and washing floors easy by allowing access to areas impossible to clean when baseboard is installed. Myson’s durable epoxy polyester finish is easily cleaned with non-abrasive household cleaner or a damp cloth.Fin tube baseboard is very difficult to clean, leaving a dust laden interior and a dented and scuffed exterior because of the use of thin sheet metal. The interior aluminum fins are razor sharp, making it difficult to clean without cutting yourself.

VALUE — Myson Radiators, when properly installed, will provide you with a lifetime of comfort and value, saving you money, year after year, long after fin tube baseboard has lost its original condition and value. Over time fin tube’s cover will degrade and the fins become coated with dust, lowering its ability to efficiently heat your home.

Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 3

Why Myson ...


Décor RadiatorsMYSON DECOR series is a fully welded, steel panel, modern radiator designed for architectural appeal. Theefficient rectangular flat panel water tubes arranged horizontally one above the other or vertically side by side,provide exceptional comfort while offering stunning visual allure.

DECOR horizontal radiators range from 2 to 11 tubes high and are available from 1 to 5 tubes in depth. Sandwiched between each layer are vertical convector channels for added heat output.

DECOR vertical radiators consist of tubes 1 or 2 layers deep arranged vertically with 6 to 10 tubes side-by-side.Both horizontal and vertical configurations have a 5/64” space between the heating tubes that guarantees additionalresistance to corrosion.

DECOR horizontal radiators come with side panels and top grilles; DECOR vertical radiators come with side panels.

DECOR radiators are delivered with welded mounting brackets. (Except the 2H) All DECOR horizontal and verticalradiators are delivered with factory-sealed drain plugs and pivotable vent plugs.

Standard Connections:2 x internal thread G 1/2“ BSP, welded-in for supply and return. Vent and drain plugs (or dummy plug) are factory sealed and are fitted according to the customer’s specifications.

Maximum positive operating pressure: Standard design: 72 psi rectangular steel tubes, 23/4” x 7/16” x 16 ga.Maximum positive operating pressure: High-pressure design: 116 psi rectangular steel tubes, 23/4” x 7/16” x 14 ga.Maximum operating temperature: 230° F

Baseboard dimensions: 2HOverall lengths: between 235/8 inches and 1181/8 inches Overall height: 59/16 inches (2 panels)

Horizontal radiator dimensions: 3H - 11HOverall lengths: between 235/8 inches and 941/2 inchesOverall heights: between 87/16 inches (3 panels) and 311/8 inches (11 panels)

Vertical radiator dimensions: 5V - 10VOverall lengths of: 141/8, 1615/16, 225/8, and 281/4 inches Overall height: 783/4 inches

• Additional sizes and models are available as special order

Finishes:1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 329° F;2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at a supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is baked at a temperature of 356° F.

General

Provide MYSON CV or RCV steel panel radiators in models and sizes including accessories as scheduled. CV and RCV RADIATORS are made of 18 gauge cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robust fluting, with ribs at 15/16 inch intervals.RCV style radiators have an added flat front panel with slight horizontal ribbing at 2.6 inch intervals for architectual appeal.

The radiators are equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a pre-installed thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.

Finishes:1. Undercoat: cataphoretic, submersion in a KTL bath, conforming to DIN 55900 part 1, baked at 347° F;

2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at asupplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.)

CONTRACTOR SERIES BASEBOARD RADIATOR Submittal Data

Quality certif icates

Warranty:MYSON radiators are covered by a

10 year warranty.

Standard Connections:6 x internal thread G 1/2“ BSP, 2 on each side and 2 on the bottom right (2"cc) or left (Ventil only is reversible) for supply and return.

Maximum positive operating pressure: 145 psi

Maximum operating temperature: 230° F

Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com

Additional depths are available as special order

1010

10

A variety of adapters, valves, and TRV actuators is available and recommended from MYSON. For specific applications see our valve literature. Pipe covers and escutcheons are available.

The CV and RCV Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit surface area for the radiator models have been achieved by ensuring excellent contact between the convector plates and both the water channels and dividing metal of the radiator panels - see figure 1. The convector surface is spot-welded to the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transfer rates.

figure 1

CV / RCV Type 22 Depth: 4 inchesdouble panel & two rows of convector plates plus side panels & top grille

CV / RCV Type 21 Depth: 23/4 inches double panel & one row of convector plates plus side panels & top grille

Standard Height:77/8 inches (Nominal)

14 Standard Lengths: 24 to 119 inches (Nominal)

"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:


Décor RadiatorsHorizontal & Vertical design, H & V models

Sid

e C

on

ne

ctio

ns:

All Dimensions are nominal

H34 Pedestal

6-7/8"

1-7

/8"

H11 1"

H22 1-7

/8"

3-11/16"

2-11/16"

8-7/16"

5-5/8"

11-1/4"

16-15/16"

22-5/8"

31-1/8"

Overall Heights Overall Lengths

2-11/16"

V11

78

-3/4

"

V111

"3/16"3/16"

2-11

/16"

13/16" Typical

Overall Length

76

-3/4

"

5-5/8" 1/2" BSP 489 3512H11

Height Model 1600F 1400F1800F

3H11 8-7/16" 1/2" BSP 618 443

627

791

8H11

11H11

6H22

8H22

11H22

2H34

4H11

6H11

11-1/4" 1/2" BSP

16-15/16" 1/2" BSP

22-5/8" 1/2" BSP

31-1/8" 1/2" BSP

16-15/16" 1/2" BSP

22-5/8" 1/2" BSP

31-1/8" 1/2" BSP

ADJUSTABLE PEDESTAL 1/2" BSP

985 769 552

1,466 1,143 821

1,778 1,387 996

2,106 1,663 1,197

2,740 2,137 1,535

3,848 3,001 2,155

2,026 1,580 1,135

1,8182,5323,246

Btuh/FT at Listed AWT and EAT of 700 F.

W

Measurement W H11 = 1-11/16" H22 = 3-7/16"

4" Minimum

XMeasurement X H11 = 3-3/8" H22 = 5 -1/4"

1-3/4"

3-3/8"

V11

H11/H22

H34

Measurement X: chosen distance between the wall or window surface and the back of the convector.

6-9

/16

"

6-7

/8"

X

3-1

/2"

3 -3/16"Min

1-7/16"

3-1/8"

2H11BB

558

1700F

705

877

1,305

1,582

1,885

2,439

3,425

1,803

2,889

420

1500F

531

661

982

1,191

1,442

1,836

2,578

1,357

2,175

282

1300F

357

444

660

800

976

1,234

1,732

912

1,461

213

1200F

271

336

498

605

755

933

1,309

689

1,104

5.25

Weight(lbs/ft)

7.62

9.75

13.34

17.57

22.54

24.82

32.94

42.38

16.08

.09

Wtr Content gals/ft

.13

.18

.26

.36

.49

.54

.72

.99

.26

5V11

6V11

8V11

10V11

78-3/4" 1/2" BSP

1/2" BSP

1/2" BSP

1/2" BSP

4,009 3,127 2,245

4,018 3,134 2,250

4,018 3,134 2,250

2,2473,1304,013

3,568

3,576

3,576

3,572

2,686

2,692

2,692

2,689

1,804

1,808

1,808

1,806

1,363

1,366

1,366

1,365

49.52

49.52

49.52

49.52

1.12

1.12

1.12

1.12

4H34 1/2" BSP 2,593 1,8622,959 2,228 1,497 1,132 31.20 .54

**100 **120 **140 **160 **180 **200 **220 **240

23-5/8" 31-1/2" 35-7/16"35-7/16" 47-1/4" 55-1/8" 63" 70-7/8" 78-3/4" 86-5/8" 94-1/2"

Model Length **060 **080

Nominal Length

**090 **300

118-1/8" 39-3/8" (cm)

(in)

3,324

5V11 6V11 8V11 10V11

14-1/8" 16-15/16" 22-5/8" 28-1/4"

VE

RT

ICA

L M

OD

ELS

ADJUSTABLE PEDESTAL

78-3/4"

78-3/4"

78-3/4"

Connections 2 per side


SELECT CompactSELECT RADIATORS are made of cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish androbust fluting with ribs at 19/16 inch intervals. This attractive and affordable model offers some of the highest heatoutputs per unit cost avilable today.

Each SELECT RADIATOR is equipped with wall mounting lugs that are welded onto the back. The radiatorsare equipped with a removable top grille and two removable closed side panels. Each radiator is supplied withmounting brackets, a blind plug and a manual vent plug.

The SELECT Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unitsurface area for the radiator models have been achieved by ensuring excellent contact between the convectorplates and both the water channels and dividing metal of the radiator panels. The convector surface is spot-weldedto the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transferrates.

Standard Connections:4 x internal thread G 1/2“ BSP, welded-in for supply and return.

Maximum positive operating pressure: 145 psiMaximum operating temperature: 230° F

Select SD Type 22 Depth: 41/8 inches

double panel & two rows of convector plates plus side panels & top grille

Select SX Type 21 Depth: 31/8 inches

double panel & one row of convector plates plus side panels & top grille

Standard Heights:12, 16, 24, & 30 inches (Nominal)

Standard Lengths:16 to 71 inches (Nominal)



General








10 year warranty.






1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:


SX Type 21 and SD Type 22 models

X

4-1/8"

1-13/16"1-1/16"

W

X

W

SX Type 21 SD Type 22

4" Min 4" Min

1-1/16"

3-1/8"

1-13/16"

A BNominal Height

1113/16

153/4

235/8

291/2

(in)(in) (in)

6

10

1713/16

233/4

911/16

135/8

211/2

273/8

XMounting Bracket

41/16

Dimension (in) Dimension (in)XW W

Type 21 Type 22

21/2 51/16 215/16

47/16 215/16 57/16 33/8

41/2 51/2215/16 33/8

KOM (BH)Short Side*KOM (BH)Long Side*

SIGARTH (EZ)

*From wall to radiator


2-5/16"1-7/8"

Order Code

SX30 40VN

SX30 60VNSX30 80VNSX30 100VN

Output*Btuh @ Order Code

400 - 153/4

600 - 235/8

800 - 311/2

1000 - 393/8

Nominal Length(mm - inches)

1419185724873095

Weight(lbs)

WaterContent(gals)

16

2229

36

He

igh

t 30

0mm

-1213

/ 16

in

SX40 50VN

SX40 60VNSX40 70VNSX40 80VNSX40 90VN

SX40 100VNSX40 120VN

SX40 160VN

520 - 201/2

600 - 235/8

720 - 283/8

800 - 311/2

920 - 361/4

1000 - 393/8

1200 - 471/4

1600 - 63

26

29

38

34

4347

73

56

1982

2379

31722775

3568

3965

6344

4758

SD40 50VN

SD40 60VNSD40 70VNSD40 80VNSD40 90VN

SD40 100VNSD40 120VNSD40 140VN

2603

3124

41653645

4686

5207

75786248

He

igh

t 4

00

mm

- 153 /

4 in

24303188

40504922

SX60 40VN

SX60 50VNSX60 60VNSX60 70VNSX60 80VN


400 - 153/4

520 - 201/2

600 - 235/8

720 - 283/8

800 - 311/2

920 - 361/4

1000 - 393/8

1120 - 441/8

27

34

4639

51

58

7063

2233

2791

39073349

4466

5024

61405582

SD60 40VN



2900

3625

50754350

5800

6525

79767251

SX60 130VN


1320 - 52

1400 - 551/8

1600 - 63

82

8799

7257

7815

8931

SD60 130VN

SD60 140VNSD60 160VN

9426

1015111601

H

eig

ht

60

0m

m -

235 /

8 in

SX60 120VN 1200 - 471/4 756698 SD60 120VN 8701

SX70 40VN


SX70 80VN


400 - 153/4

600 - 235/8

720 - 283/8

800 - 311/2

920 - 361/4

1000 - 393/8

1200 - 471/4

3342

58

50

65

73

9881

2534

3168

44353802

50695702

76036336

SD70 40VN


SD70 80VNSD70 90VN

SD70 100VNSD70 120VN

3258

4072

57014887

6516

7330

97738144

Hei

ght

70

0mm

-291 /

2 in


1400 - 551/8

1600 - 63 131114

101388871 SD70 140VN

SD70 160VN 1303111402

520 - 201/2


0.41

0.620.82

1.03

0.69

0.79

1.060.95

1.22

1.32

2.11

1.58

0.75

0.98

1.351.13

1.50

1.73

2.111.88

2.25

2.48

3.002.63

0.871.02

1.56

1.30

1.73

1.99

2.60

2.17

3.03

3.47

Order Code

SX30 XXXVN

SX40 XXXVNSX60 XXXVNSX70 XXXVN

Order Code

1113/16

153/4

235/8

291/2

Nominal Height(inches)

Btuh/ft at1800F AWT**

943

120817011931

Weight(lbs/ft)

WaterContent(gals/ft)

Weight(lbs/ft)

WaterContent (gals/ft)

11.18

14.7319.81

25.40

13.21

17.7822.86

32.00

SD30 XXXVNSD40 XXXVNSD60 XXXVNSD70 XXXVN

0.314

0.4020.572

0.660

0.314

0.4020.572

0.660

Specifications per Linear Foot

* Outputs are based on EAT of 680F. For outputs based on other AWT and/or other EAT please consult our radiator correction chart.

** Outputs are based on a delta T of 200F and EAT of 680F.

SX30 120VN


1200 - 471/4

1400 - 551/8

1600 - 631800 - 707/8

373443334976

5570

42

4955

62

567064337290


1.241.44

1.65

1.85

Weight(lbs)

WaterContent

(gals)

31

35

4641

52

57

7867

26

3442

50

31

39

5345

59

67

8173

95

101115

87

42

53

7163

7989

119

102

154135

58

6674

1800F AWT

Output*Btuh @

1800F AWT

Output*Btuh @

1458

1750

23332041

2624

2916

42443499

13611786

22682757

1624

2030

28422436

3248

3654

44674061

5279

5685

6497

4873

1825

2281

31932737

3649

4105

54734561

7298

6385

317636034083

1400F AWT

Output*Btuh @

2005

2406

32072807

3609

4010

58354811

18712455

31193790

2233

2792

39083350

4466

5025

61425584

7258

78178933

6700

2509

3136

43903763

5018

5644

7526

6271

10034

8780

436649545614

1600F AWT

Output*Btuh @

1110

1333

17761554

1998

2221

3553

2665

795

104013931733

1251

1563

21881876

2501

2814

34393126

4064

4376

5002

3751

1419

1774

24842129

28393193

42583548

5678

4968

2091242727873120

Output*Btuh @

1526

1832

24432137

2748

3053

4885

3664

1093143019152383

1720

2150

30092579

3439

3869

47294299

5588

6018

6877

5158

1952

2440

34152928

39034391

58554879

7807

6831

2875333738324289

1600F AWT 1400F AWT

0.620.82

1.03

0.69

0.79

1.060.95

1.22

1.32

1.85

1.58

0.75

0.98

1.351.13

1.50

1.73

2.111.88

2.25

2.48

3.002.63

0.871.02

1.56

1.30

1.73

1.99

2.60

2.17

3.03

3.47

1.241.44

1.65

1.85


727931

13101487


529677953

1082


1234 158722102482


951

122217021911


691889

12381390

SD40 160VN 8331 8946666415 2.11

---

---

SELECT Compact


T6 IVCT6 IVC RADIATORS are made of cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robustfluting, with ribs at 19/16 inch intervals. The high outputs, included TRV insert, and 2”cc bottom center connections,and ease of installation make the T6 IVC radiator a favorite choice of professional heating engineers andcontractors.

Each T6 IVC CENTER CONNECT RADIATOR is equipped with wall mounting lugs that are welded onto the back.The radiators are equipped with a removable top grille and two removable closed side panels. Each radiatoris supplied with mounting brackets, a blind plug, drain plug, compression adapters, and a pivoting special vent plug. A pre-installed thermostatic valve insert is included with each radiator.

The T6 Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unitsurface area for the radiator models have been achieved by ensuring excellent contact between the convectorplates and both the water channels and dividing metal of the radiator panels. The convector surface is spot-weldedto the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transferrates. In addition, the internal T configuration supply distribution insures an efficient top to bottom water flow forrapid demand response.

Standard Connections:4 x internal thread G 1/2“ BSP side 4 corners2 x external thread G 3/4” bottom centerMaximum positive operating pressure: 145 psiMaximum operating temperature: 230° F

T6 IVC Depth: 41/8 inchesdouble panel & two rows of convector plates plus side panels & top grilleStandard Heights:12, 20, & 24 inches (Nominal)Standard Lengths:16 to 79 inches (Nominal)



General








10 year warranty.






1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

The ‘HV-S’ and ‘HV-A’ valves provide a simple one piece solution for balancing and isolation for any radiator with 2”cc bottom connections in both straight and angle applications.


T6 IVC


T6 IVC SERIES Specification Data

Type 22 model

X4-1/8"

1-13/16" 1-1/16"

4" Min

A BNominal Height

1113/16

1911/16

235/8

(in)(in) (in)

6

137/8

1713/16

911/16

179/16

211/2

XMounting Bracket

51/16

Dimension (in)ZY

T6 22 MOUNTING DIMENSIONS

23/16215/16

57/16 29/1633/8

51/2 25/833/8

KOM (BH)Short Side*KOM (BH)Long Side*

SIGARTH (EZ)

* From wall to radiator All Dimensions are nominal

2-5/16"

ZY

1/4"

T6 22For bottom center connections use dimension Z from wall. When using bottom center connections Supply and Return connections are 2"CC at radiator center.

2"

Order Code Nominal Length(mm - inches)

Output*Weight

(lbs)

WaterContent

(gals)

T622-3-04

T622-3-06T622-3-08T622-3-92

T622-3-10

T622-3-12T622-3-14T622-3-16

400 - 153/4

600 - 235/8

800 - 311/2

920 - 361/4

1000 - 393/8

1200 - 471/4

1400 - 551/8

1600 - 63

20

28

41

36

44

52

6071

1893

2890

44033645

4814

5802

7489

6742

T622-3-20

T622-4-06T622-4-08

2000 - 783/4 84

37

47

9632

36334576

T622-3-18 1800 - 707/8 768366

T622-4-92

T622-4-10

54

58

5299

6022

0.41

0.62

0.950.82

1.03

1.24

1.65

1.44

1.85

2.06

1.060.79

1.22

1.32

Hei

ght

300

mm

-

1113

/ 16 in

Btuh @ 1800F AWT

Output*

1457

2225

33902806

3707

4468

57675191

7417

27973524

6442

4080

4637

Btuh @ 1600F AWT

Output*

1060

1618

24662036

2696

3249

41943776

5394

2035

2562

4685

2968

3372

Btuh @ 1400F AWT

T622-4-12 697188

T622-4-14

T622-4-16

80

91

8344

9055

1.58

1.85

2.11

5535

6425

6972

4025

4673

5071Hei

ght

400

mm

- 1

53 /4

in 600 - 235/8

800 - 311/2

920 - 361/4

1000 - 393/8

1200 - 471/4

1400 - 551/8

1600 - 63

T622-5-04

T622-5-06T622-5-08T622-5-92

T622-5-10

T622-5-12T622-5-14T622-5-16

400 - 153/4

600 - 235/8

800 - 311/2

920 - 361/4

1000 - 393/8

1200 - 471/4

1400 - 551/8

1600 - 63

29

42

62

54

67

79

10492

2811

4217

64665755

7199

8434

11246

9877

T622-5-20

T622-6-04T622-6-06

2000 - 783/4 129

33

47

14057

32074811

T622-5-18 1800 - 707/8 11712652

T622-6-92

T622-6-12

69

89

7377

9622

0.65

0.97

1.491.29

1.61

1.94

2.58

2.26

2.90

3.22

1.130.75

1.73

2.25

Hei

ght

500

mm

-

1911

/ 16 in

2165

3247

49794431

5543

6494

86607605

10824

24693705

9742

5680

7409

1574

2362

36213223

4031

4723

62985531

7872

1796

2694

7085

4131

5388

T622-6-16 11712829

T622-6-18

T622-6-20

131

145

14443

16036

3.00

3.38

3.76

9878

11121

12348

7184

8088

8980Hei

ght

600

mm

- 2

35 /8 in 400 - 153/4

600 - 235/8

920 - 361/4

1200 - 471/4

1600 - 63

2000 - 783/4

1800 - 707/8


Order Code

T622-3-XX

T622-4-XXT622-5-XX

1113/16

153/4

1911/16

T622-6-XX



1468 184521422444

Weight(lbs/ft)


539103412001368

0.314

0.4020.491



14.2

18.821.3

23.9

1130142116501882


235/8

153/4


0.572

135/8 915/16


Contractor SeriesCV and RCV RADIATORS are the perfect choice for those installations requiring cost sensitive linear applications.The perfect alternative to fin tube baseboard, this radiator, with its 18 gauge, powder coated steel construction,and flexible installation options, is a favorite of builders and home owners across North America.

The CV model has stylish and robust vertical fluting at 15/16 inch intervals. RCV style radiators have an added frontpanel with straight horizontal ribbing at 2.6 intervals providing the architectural appeal for the DECOR radiator.

The radiators are equipped with a removable top grille and two removable closed side panels. Each radiator issupplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual ventplug, two blind plugs, and copper sweat adapters, and a preinstalled thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.

The CV and RCV Series radiators are an advanced design giving high efficiency characteristics. The high outputs perunit surface area for the radiator models have been achieved by ensuring excellent contact between the convectorplates and both the water channels and dividing metal of the radiator panels. The convector surface is spot-weldedto the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transferrates.

Standard Connections:

6 x internal thread G 1/2“ BSP, 2 on each side and 2 on the

bottom right (2”cc) or left (CV only is reversible) for supply

and return.


Maximum operating temperature: 230° FCV / RCV Type 21 Depth: 2 3/4 inches double panel & one row of convector plates plus side panels & top grille


Standard Height:

7 7/8 inches (Nominal)

14 Standard Lengths:24 to 119 inches (Nominal)

• Additional depths are available as special order

Finishes:1. Undercoat: cataphoretic, submersion in a KTL bath, conforming to DIN 55900 part 1, baked at 347° F;2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at a supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.)

General








10 year warranty.






1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

CV Model RCV Model

General








10 year warranty.

Standard Connections:6 x internal thread G 1/2“ BSP, 2 on each side and 2 on the bottom right (2"cc) or left (Ventil only is reversible)

for supply and return.





1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

General








10 year warranty.







1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

General








10 year warranty.







1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

The ‘HV-S’ and ‘HV-A’ valves provide a simple one piece solution for balancing and isolation for any radiator with 2”cc bottom connections in both straight and angle applications.


Contractor Series


CONTRACTOR SERIES BASEBOARD RADIATOR Specification Data

CV and RCV Type 21 and Type 22 models


Order CodeCV/RCV Type 21


Output*Weight

(lbs)

WaterContent

(gals)

CV21/RCV21-600CV21/RCV21-700CV21/RCV21-800CV21/RCV21-900CV21/RCV21-1000

CV21/RCV21-1100CV21/RCV21-1200CV21/RCV21-1400

600 - 235/8

700 - 283/8

800 - 311/2

900 - 361/4

1000 - 393/8

1100 - 435/16

1200 - 471/4

1400 - 551/8

14.3/18.0

17.2/21.6

21.9/27.619.1/24.0

23.8/30.0

26.2/33.0

33.4/42.028.6/36.0

1346

1573

20221796

2248

2472

3147

2698

CV21/RCV21-1800

CV21/RCV21-2000CV21/RCV21-2300

1800 - 707/8

2000 - 783/4

2300 - 909/16

42.9/54.0

47.6/60.0

54.8/69.0

4046

44965172

CV21/RCV21-1600 1600 - 63 38.1/48.03598

CV21/RCV21-2600

CV21/RCV21-3000

2600 - 1023/8 61.9/78.0

76.8/90.0

5842

67423000 - 1181/8

0.39

0.47

0.600.52

0.66

0.72

0.92

0.79

1.05

1.18

1.511.31

1.71

1.97


Order Code

CV21 - XXXX

CV22 - XXXXRCV21 - XXXXRCV22- XXXX

77/8

77/8

77/8

77/8



684 902684902

Weight(lbs/ft)


397523397523

0.20

0.200.20

0.20




3"

1" 4"57 / 8

"

type CV 21 type CV 22

41 / 8"

33 / 4"

min

. 4"

1" 23/4"

23/8"

77 / 8"

type RCV 21 type RCV 22

type CV 21 type CV 22type RCV 21 type RCV 22

41 / 8"

33 / 4"

min

. 4"

57 / 8"

77 / 8" 41 / 8

"33 / 4

"m

in. 4

"

57 / 8"

77 / 8"

23/8"

27/8"1"

3"

41 / 8"

33 / 4"

min

. 4"

57 / 8"

77 / 8"

41/8"1"

57 / 8"

57 / 8"

77 / 8"

77 / 8"

min

. 4"

min

. 4"

CV Baseboard and RCV Baseboard - wall brackets

CV Baseboard and RCV Baseboard - pedastal

23/4" / 27/8" 4" / 41/8"

water volume and weightwater volume : gal/ft

Ventil Compact 0.20 0.200.20 0.20Ramo Ventil Compact

weight : lbs/fttyperadiator 21 22

Ventil Compact 7.26 9.148.47 10.41Ramo Ventil Compact

typeradiator 21 22

Hei

ght

200

mm

-

77 /

8 in

Order CodeCV/RCV Type 22Btuh @

1800F AWT

Output*

1063

1243

15971419

1776

1953

2486

2131

3196

35524086

2842

4615

5326

Btuh @ 1600F AWT

Output*

781

912

11731042

1304

1434

1825

1565

2347

26083000

2087

3388

3910

Btuh @ 1400F AWT

CV22/RCV22-600CV22/RCV22-700CV22/RCV22-800CV22/RCV22-900CV22/RCV22-1000

CV22/RCV22-1100CV22/RCV22-1200CV22/RCV22-1400

CV22/RCV22-1800

CV22/RCV22-2000CV22/RCV22-2300

CV22/RCV22-1600

CV22/RCV22-2600

CV22/RCV22-3000

Output*Weight

(lbs)

WaterContent(gals)

1776

2075

26682370

2964

3251

41503968

5336

59396818

4758

7706

8894

Btuh @ 1800F AWT

Output*

1403

1639

21081873

2342

2568

32793135

4215

46925386

3759

6088

7026

Btuh @ 1600F AWT

Output*

1030

1204

15471375

17191886

24072301

3095

34453954

2760

4469

5159

Btuh @ 1400F AWT

7.26

9.148.47

10.41

540713540713


Wall Bracket Pedastal Stand

Number of wall or pedastal brackets per radiator length

up to 1600mm: 2 brackets1600 - 2400mm: 3 bracketsover 2400mm: 4 brackets

0.39

0.47

0.600.52

0.66

0.72

0.92

0.79

1.05

1.18

1.511.31

1.71

1.97

16.7/20.5

20.0/24.6

25.6/31.522.3/27.4

27.8/24.2

30.6/37.6

38.9/47.933.4/41.0

50.0/61.5

55.6/68.4

63.9/78.6

44.5/54.7

72.3/88.9

83.4/102.5


ColumnThe COLUMN Series radiators have a traditional design appearance giving modern characteristics to architecturalperiod designs. This series of radiators is the first choice for architects and interior designers where periodrestoration integrity is required. These radiators present the look and feel of “old fashioned cast iron” while offeringthe efficiency and ease of installation necessary in a modern environment. The high outputs per radiator have beenachieved by the large surface area and large water channels with negligible friction loss.

COLUMN RADIATORS are made of precision D-profile steel tubes in accordance with EN 442. A unique laserwelding process eliminates visible welding points and enhances the structural integrity of connected sections and the aesthetic quality of each radiator.

Each COLUMN RADIATOR is supplied with wall mounting brackets, a blind plug and a manual vent plug. Optionalfloor mounting stand kits are available.

Standard Connections:4 x internal thread G 1/2“ BSP, welded-in for supply and return.Maximum positive operating pressure: 145 psiMaximum operating temperature: 248° F2 - COLUMN:Standard Heights: 18, 24, & 79 inches (45, 60, & 200 cm)

3 - COLUMN:Standard Heights: 12, 18, & 24 inches (30, 45, & 60 cm)

4 - COLUMN:Standard Height: 24 inches (60 cm)


General








10 year warranty.






1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

Finishes:1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F;2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at3. supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is baked at a temperature of 410° F.

General

Provide COLUMN tube radiators in models and sizes including accessories as scheduled. COLUMN RADIATORS are made of precision D-profile steel tubes in accordance with EN 442. A unique laser welding process eliminates visible welding points and enhances the structural integrity of connected sections and enhances the aesthetic quality of each radiator.

Each COLUMN RADIATOR is supplied with wall mounting brackets, a blind plug and a manual vent plug. Optional floor mounting stand kits are available.

Finishes:1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F;2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at a

supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is bakedat a temperature of 410° F.

COLUMN SERIES RADIATOR Submittal Data

Standard Connections:4 x internal thread G 1/2“ BSP, welded-in for supply and return. Maximum positive operating pressure: 145 psi Maximum operating temperature: 248° F

Additional sizes and models are available as special order

The COLUMN Series radiators have a traditional design appearance, giving modern characteristics to architectural period designs. The high outputs per radiator models have been achieved by the large surface areas and large water channels with negligable head loss.

2 - COLUMN: Standard Heights: 18, 24, & 79 inches (45, 60, & 200 cm) 3 - COLUMN: Standard Heights: 12, 18, & 24 inches (30, 45, & 60 cm) 4 - COLUMN: Standard Height: 24 inches (60 cm)



APPROVED DATE:

APPROVED

PROJECT NAME:

ARCHITECT:

ENGINEER:

SUBMITTED DATE:


10 year warranty. 1010

10



Column

* Outputs are based on an AWT of 1800F and EAT of 680F.For outputs based on other AWT please consult our radiator correction chart.

Height24in

Height18in

Height

79in

4 COLUMN

Height12in

Height18in

Height24in

Height24in

4 COLUMN3 COLUMN2 COLUMN

21/2 in 4in 51/2 in

2 COLUMN

No. of Sections Weight (lbs) Output (Btu/h) Order Code

2412 19.8 148512 - 20453216 26.5 198016 - 20454020 33.0 247420 - 20454724 39.6 296924 - 20455528 46.2 346428 - 20457236 59.4 445436 - 2045

2412 25.9 192512 - 20603216 34.6 256716 - 20604020 43.2 320920 - 20604724 52.0 385024 - 20605528 60.5 449228 - 2060

126 41.4 30066 - 2200168 55.2 40088 - 22002010 69.0 501010 - 22002412 82.8 601212 - 22003015 103.5 751515 - 2200

Water Content (gals)

1.682.242.803.363.925.00

2.102.803.504.204.90

3.004.025.026.027.53

Length (in)

3 COLUMN


3216 27.5238016 - 30304020 34.4297520 - 30305628 48.2426528 - 30307236 62.0535536 - 3030

2412 29.6267412 - 30453216 39.5356516 - 30454020 49.4445620 - 30454824 59.3534724 - 30455628 69.3643928 - 3045

2412 41.4356612 - 30603216 55.2475516 - 30604020 69.0594420 - 30604824 82.8713224 - 30605628 103.5832128 - 3060


2.423.024.235.44

2.413.224.024.835.63

3.004.025.026.027.53

Length (in)

7236 88.9802136 - 3045 7.24


2412 51.6421312 - 40603216 68.8561816 - 40604020 86.0702220 - 40604824 103.2842624 - 4060


4.005.336.678.00

Length (in)

* All dimensions are nominal

Length equals the number of sections times 2" Example: 56 sections times 2" equals 112"

2"

1"

1 1/4"

1 1/4"

4 Column5 1/2"

3 Column4"

2 Column2 1/2"


Low Surface Temperature “LST”The MYSON LST radiator is the leading radiator where, for reasons of safety, high surface temperature radiatorscan not be used. With surface temperatures under 110°F, the LST radiator is ideal for applications includinghospitals, elderly care facilities, daycare centers and all installations requiring attention to the well being ofoccupants with special needs. The exterior shroud is provided with a simple, double security screw mechanism toprevent tampering and vandalism.

The LST is packaged in a single box which includes the radiator, shroud, brackets, plug, and installation template.Special valve kits are availble for specific application requirements.

MYSON LST RADIATORS are made of 18 gauge cold-rolled sheet steel in accordance with EN 442-1.

The LST Series radiators are equipped with a separate 18 gauge rounded steel enclosure designed to giveprotection against high surface temperature. The enclosure is engineered to have a surface temperature of less than109°F with an inlet water temperature of 180°F in addition to providing for the concealment and security of thepipework and valves. A unique locking mechanism prevents unauthorized removal but give convenient access forventing, cleaning, decorating, etc. locates into grooves on the water channels, thus ensuring high heat transfer rates.

General








10 year warranty.






1010

10



figure 1





"CV" series

"RCV" series

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

2"13/16"

ARCHITECT:

SUBMITTED DATE:

Standard Connections:4 x internal thread G 1/2“ BSP, 2 on each side, welded in for supply and return.

Maximum positive operating pressure: 117.1 psiMaximum operating temperature: 230° FLST Super Depth: 4 7/32 inchessingle panel & one row of convector plates plus rounded steel enclosure

LST Super Plus Depth: 6 3/16 inchesdouble panel & two rows of convector plates plus rounded steel enclosure

Standard Heights: 22, 25, 33, & 37 inches (Nominal)

Standard Heights:24 to 79 inches (Nominal)

• MYSON recommends the use of one ofthe following TRV kits with the LSTradiator:- Close Coupled TRV Kit Suitable for TBOE or BOE connections- Direct Fit TRV Kit Suitable for TBOE connections only

General

Provide MYSON LST wall hung steel panel radiators with included shroud in models and sizes including accessories as scheduled. MYSON LST RADIATORS are made of 18 gauge cold-rolled sheet steel in accordance with EN 442-1.

The LST Series radiators are equipped with a separate 18 gauge rounded steel enclosure designed to give protection against high surface temperature. The enclosure is engineered to have a surface temperature of less than 1090F with an inlet water temperature of 1800F in addition to providing for the concealment and security of the pipework and valves. A unique locking mechanism prevents unauthorized removal but give convenient access for venting, cleaning, decorating, etc.

Finishes:1. Undercoat: electrophoretic, using water soluble paint, conforming to DIN 55900 part 1, baked at 347° F;


LST LOW SURFACE TEMPERATURE RADIATOR Submittal Data


Warranty:MYSON radiators

are covered by a 10 year warranty.

Standard Connections:4 x internal thread G 1/2“ BSP, 2 on each side, welded in for supply and return.

Maximum positive operating pressure: 117.1 psi



1010

10

MYSON recommends the use of one of the following TRV kits with the LST radiator.- Close Coupled TRV Kit Suitable for TBOE or BOE connectioins- Direct Fit TRV Kit Suitable for TBOE connections only

The LST Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit surface area for the radiator models have been achieved by ensuring excellent contact between the convector plates and both the water channels and dividing metal of the radiator panels - see figure 1. The convector surface is spot-welded to the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transfer rates.

figure 1

LST Super Plus Depth: 63/16 inchesdouble panel & two rows of convector plates plus rounded steel enclosure

LST Super Depth: 47/32 inchessingle panel & one row of convector plates plus rounded steel enclosure

PROJECT NAME:

ENGINEER:

APPROVED DATE:

APPROVED

ARCHITECT:

SUBMITTED DATE:

Ce

rtified heat outputs

BS EN 442

Standard Heights:22, 25, 33, & 37 inches (Nominal)

Standard Lengths: 24 to 79 inches (Nominal)

This arrangement offers a choice of positions for both the valve body and sensor head.

The kit allows the thermal sensing head of a MYSON Thermostatic Radiator Valve to be mounted directly on the top left/right hand side of the LST enclosure. The point of fitting has been half-sheared and requires only to be knocked out to facilitate easy installation, becoming an integral part of the appliance.

The valve body is fitted to the heat emitter and is coupled to the sensing head by a flexible capillary extension lead.

Direct Fit TRV Kit This kit allows a MYSON TRV body to be directly fitted to the radiator, with the thermostatic head projecting beyond the enclosure.

Close Coupled TRV Kit

Finishes:1. Undercoat: electrophoretic, using water soluble paint, conforming to DIN 55900 part 1, baked at 347° F;2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at a supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.)


Low Surface Temperature “LST”


LST LOW SURFACE TEMPERATURE RADIATOR Specification Data

LST Super and LST Super Plus models

All Dimensions are nominal* Outputs are based on EAT of 680F. For outputs basedon other AWT and/or other EAT please consult ourradiator correction chart.

0.200.20

22

9.1410.41

22

LST Super LST Super Plus

Bracket Positions and Dimensions

Radiator

Enclosure Length ‘A’

315/16 S=31/4

SP=315/16

3/4

S=31/4

SP=315/16

3/4

5 5/16

9 1/4

5S, 5

SP, 8

S &

8SP

6S, 6

SP, 9

S &

9SP

Emitt

er h

eigh

t ‘C

’ E n

clos

ure

heig

ht ‘B

’

3 5/16

47/32

6S=1

313/ 1

6

5S=9

27/ 3

2

9S=2

519/ 3

2

8S=2

1 21/3

2

8 11/3

2 113/16

25/32

41 /2

111/32

63/16

31/16

LST Super Side Elevation

Floor Level

Looking Towards Wall LST Super Plus Side Elevation

Important: It is advisable to leave a further 3/16" clearance above any final floor covering to allow for easy fitting and removal.

Enclosure Height*

Radiator Height

B (in) 221/2 2615/32 3411/32 381/4

C (in) 1113/16 153/4 235/8 279/16

Enclosure Length A

(in)

235/8

311/2

393/8

471/4

551/8

63

707/8

783/4

* This measurement includes an extra 7/8" to account for the curvature of the top grille.

6-3/16"4-7/32"

315/16

8 11/3

2

6S=1

3 13/1

6

5S=9

27/3

2

9S=2

5 19/3

2

8S=2

1 21/3

2

41 /2

111/32

25/32

Order Code

5 LS 080

5 LS 1005 LS 120

5 LS 160

Output*Btuh @ Order Code

600 - 235/8

1000 - 393/8


946

1261

1576

2207

Weight(lbs)

WaterContent(gals)

27

34

41

55

Height 572mm 221/2 in

6 LS 060

6 LS 080

6 LS 100

6 LS 120

6 LS 140

6 LS 160

6 LS 180

6 LS 200

600 - 235/8

800 - 311/2

1000 - 393/8

1200 - 471/4

25

33

50

42

59

6877

830

1245

2074

1660

2489

29043319

1597

2395

3992

3194

4790

5589

7186

6387

Height 672mm

2615/32 in

2481

3102

43425583

8 LS 060

8 LS 080

8 LS 100

8 LS 120

8 LS 140

8 LS 160

8 LS 180

8 LS 200

34

46

71

59

84

96

121109

1205

1808

3013

2410

3615

4218

5423

4820

2249

3374

5623

4498

6748

7872

10121

8997

Height 872mm

3411/32 in

9 LS 060

9 LS 080

9 LS 1009 LS 120

9 LS 140

9 LS 1609 LS 180

38

52

8066

94

108

122

1383

2074

34562765

4148

4839

5530

2548

3822

6370

5096

76448918

10192

Height972mm 381/4 in

0.34

0.43

0.51

0.68

0.32

0.43

0.64

0.53

0.74

0.85

0.95

0.48

0.64

0.95

0.80

1.10

1.27

1.591.43

0.54

0.72

1.080.90

1.26

1.441.62

5 LS 200

1200 - 471/4

2837 69 0.85

Weight(lbs)

WaterContent

(gals)

36

50

77

63

90

103

130

117

50

6182

103

51

71

110

90

129

149

188

169

58

80

125

103

147170

192

1800F AWT

Output*Btuh @

1800F AWT

Output*Btuh @

811

1217

2028

1622

2433

2839

3650

3234

1256

1571

2199

2827

1150

1724

2874

2299

3449

4023

5173

4598

1306

1959

3266

2613

39194572

5225

1600F AWT

Output*Btuh @

418

627

1045

836

1254

14631672

475

634

792

1109

610

915

1526

1221

1831

2136

2746

2441

702

1053

1755

1404

21062457

2808

1426

1600F AWT

0.85

1.02

1.36

0.65

0.87

1.301.09

1.521.74

2.17

1.95

0.94

1.25

1.87

1.56

2.19

2.50

3.12

2.81

1.101.46

2.191.83

2.56

2.923.28

1.69

1600 - 63

2000 - 783/4

1400 - 551/8

1600 - 63

1800 - 707/8

2000 - 783/4

600 - 235/8

800 - 311/2

1000 - 393/8

1200 - 471/4

1400 - 551/8

1600 - 63

1800 - 707/8

2000 - 783/4

600 - 235/8

800 - 311/2

1000 - 393/8

1200 - 471/4

1400 - 551/8

1600 - 63

1800 - 707/8

3734 1881 85 1.06

5 LSP 080

5 LSP 1005 LSP 120

5 LSP 160

6 LSP 060

6 LSP 080

6 LSP 100

6 LSP 120

6 LSP 140

6 LSP 160

6 LSP 180

6 LSP 200

5 LSP 200

8 LSP 060

8 LSP 080

8 LSP 100

8 LSP 120

8 LSP 140

8 LSP 160

8 LSP 180

8 LSP 200

9 LSP 060

9 LSP 080

9 LSP 1009 LSP 120

9 LSP 1409 LSP 1609 LSP 180

1861 40 942 0.68


SEWA NERO

Designer Series

Specialty Radiators


Specialty RadiatorsStainless Steel

Designer Column Table

Norte

Gemini

Aries

Ramsey

Designer Column Bench


Colors

Letyour

imaginationrun

WILD

71Colour palette

AloaVNF 5903

Blazing RedRAL 3000

UltramarineRAL 5002

Moss GreenRAL 6005

Stone GreyRAL 7030

Grey WhiteRAL 9002

ManhattenVNF 7902

PergamonVNF 1904

Key WestVNF 5902

Pastel YellowRAL 1034

MauveRAL 4007

Pastell BlueRAL 5024

Graphite GreyRAL 7024

Cream WhiteRAL 9001

FlanellVNF 7905

Pearl OrangeRAL 2013

AlbaVNF 9902

Traffi c YellowRAL 1023

RaspberryRAL 3027

Distance BlueRAL 5023

AnthraciteRAL 7016

ChocolateRAL 8017

CrocusVNF 6903

BananaVNF 1907

Pearl GoldRAL 1036

EdelweißVNF 9901

Ivory LightRAL 1015

Beige RedRAL 3012

Dove BlueRAL 5014

Slate GreyRAL 7015

Tele GreyRAL 7047

Traffi c BlackRAL 9017

SunsetVNF 3902

BahamabeigeVNF 1902

Pearl BeigeRAL 1035

CalypsoVNF 6902

Pearl Light GreyRAL 9022

Pearly WhiteRAL 1013

Reddish BlackRAL 3007

Steel BlueRAL 5011

Silver GreyRAL 7001

Window GreyRAL 7040

Deep BlackRAL 9005

StellaVNF 7903

AnemoneVNF 1901

GreenwichVNF 6904

Pearlopal GreenRAL 6036

GoldenRAL 1004

ClaretRAL 3005

Signal BlueRAL 5005

MintRAL 6029

Dust GreyRAL 7037

Traffi c WhiteRAL 9016

MagnoliaVNF 3901

NaturalVNF 1905

KapriVNF 5901

Pearl Night BlueRAL 5026

BeigeRAL 1001

RubyRAL 3003

SapphireRAL 5003

White GreenRAL 6019

Light GreyRAL 7035

WhiteRAL 9010

ChinchillaVNF 7901

JasminVNF 1903

AegeanVNF 6901

Met

allic

co

lour

s.St

and

ard

co

lour

s.Sa

nita

ry-w

are

colo

urs.

Additional charge for colours (except RAL 9016):Standard colours: + 30%Sanitary-ware colours: + 30%Metallic colours: + 30%

CappuccinoRAL 060 60 20

TerracottaRAL 050 60 30

CocoaRAL 050 40 20

Stainless Steel LookVNF 7906

White AluminiumRAL 9006

Grey AluminiumRAL 9007

The colours shown here are not binding. Chromatic aberrations are possible due to typographic reasons. Additional colours are available on request!

Technical information subject to change.

71Colour palette

AloaVNF 5903

Blazing RedRAL 3000

UltramarineRAL 5002

Moss GreenRAL 6005

Stone GreyRAL 7030

Grey WhiteRAL 9002

ManhattenVNF 7902

PergamonVNF 1904

Key WestVNF 5902


MauveRAL 4007



Cream WhiteRAL 9001

FlanellVNF 7905


AlbaVNF 9902


RaspberryRAL 3027


AnthraciteRAL 7016

ChocolateRAL 8017

CrocusVNF 6903

BananaVNF 1907

Pearl GoldRAL 1036

EdelweißVNF 9901

Ivory LightRAL 1015

Beige RedRAL 3012

Dove BlueRAL 5014

Slate GreyRAL 7015

Tele GreyRAL 7047


SunsetVNF 3902

BahamabeigeVNF 1902

Pearl BeigeRAL 1035

CalypsoVNF 6902




Steel BlueRAL 5011

Silver GreyRAL 7001

Window GreyRAL 7040

Deep BlackRAL 9005

StellaVNF 7903

AnemoneVNF 1901

GreenwichVNF 6904


GoldenRAL 1004

ClaretRAL 3005

Signal BlueRAL 5005

MintRAL 6029

Dust GreyRAL 7037


MagnoliaVNF 3901

NaturalVNF 1905

KapriVNF 5901


BeigeRAL 1001

RubyRAL 3003

SapphireRAL 5003

White GreenRAL 6019

Light GreyRAL 7035

WhiteRAL 9010

ChinchillaVNF 7901

JasminVNF 1903

AegeanVNF 6901

Met

allic

co

lour

s.St

and

ard

co

lour

s.Sa

nita

ry-w

are

colo

urs.




CocoaRAL 050 40 20






71Colour palette

AloaVNF 5903

Blazing RedRAL 3000

UltramarineRAL 5002

Moss GreenRAL 6005

Stone GreyRAL 7030

Grey WhiteRAL 9002

ManhattenVNF 7902

PergamonVNF 1904

Key WestVNF 5902


MauveRAL 4007



Cream WhiteRAL 9001

FlanellVNF 7905


AlbaVNF 9902


RaspberryRAL 3027


AnthraciteRAL 7016

ChocolateRAL 8017

CrocusVNF 6903

BananaVNF 1907

Pearl GoldRAL 1036

EdelweißVNF 9901

Ivory LightRAL 1015

Beige RedRAL 3012

Dove BlueRAL 5014

Slate GreyRAL 7015

Tele GreyRAL 7047


SunsetVNF 3902

BahamabeigeVNF 1902

Pearl BeigeRAL 1035

CalypsoVNF 6902




Steel BlueRAL 5011

Silver GreyRAL 7001

Window GreyRAL 7040

Deep BlackRAL 9005

StellaVNF 7903

AnemoneVNF 1901

GreenwichVNF 6904


GoldenRAL 1004

ClaretRAL 3005

Signal BlueRAL 5005

MintRAL 6029

Dust GreyRAL 7037


MagnoliaVNF 3901

NaturalVNF 1905

KapriVNF 5901


BeigeRAL 1001

RubyRAL 3003

SapphireRAL 5003

White GreenRAL 6019

Light GreyRAL 7035

WhiteRAL 9010

ChinchillaVNF 7901

JasminVNF 1903

AegeanVNF 6901

Met

allic

co

lour

s.St

and

ard

co

lour

s.Sa

nita

ry-w

are

colo

urs.




CocoaRAL 050 40 20






Stan

dard

Col

ors.

Met

allic

Col

ors.

Sani

tary

-war

e Co

lors

.


Radiator Valves2 Myson TRV II™ Radiator Valves

1-800-698-9690

Now you can controltemperatures room by room!

Myson TRV II Radiator Valves provide a cost-effectivemethod of achieving better energy efficiency by allowingyou to control temperatures in your house, room by room.

Choose the precise temperature you want in each roomand the Myson TRV II automatically maintains it. It’s quickand easy to have the Myson TRV II installed: there’s nocomplicated plumbing and the cost is amazingly smallcompared to the savings you’ll see in your heating billsyear after year.

Comfort, safety & durabilityThe Myson TRV II:

• Controls the level of heat in individual rooms,much like a zone valve;

• Automatically shuts off when the need forheat is satisfied;

• Has a locking or limited range adjustment toprevent tampering;

• Provides optimum comfort while reducing energywaste and heating costs.

Technical Data:

• For Hot Water Systems Only• Maximum Operating Pressure 145 psi• Maximum Water Temperature 248°F• Conforms to ISO 9002• Liquid-Filled Sensor Element• Time Constant: 26 min• Hysteresis <2°F• Setting Ambient Range 46°F to 83°F• Normal Setting 68°F• Frost Setting 46°F• Maximum Differential Pressure 8 psi

The Myson TRV II Valve incorporates a notchedeconomy position (set at 68°F) which gives a warningwhen the valve is turned to higher temperatures.

InsertBody

Disc

O-Ring

StemSeal

SensorCarrier

Spindle

LockNut

Sensor(Liquid Filled)

heatingthrough

Myson TRV II™ Radiator Valves 3

www.mysoninc.com

* I II III IIII

OFF 46°F 53°F 60°F 68°F 75°F 83°F

* I II III IIII

42°F 50°F 57°F 64°F 72°F 79°F

TRV II A B

2TRVHD 1-15/16" 3-9/16"

Closing temperatures of the sensor

* I II III IIII

Setting range of temperature with proportional band of <4°F

* I II III IIII

TRV II A B

TRV II ValveB

A

This is how Myson’s unique TRV II Valve works:

� Each TRV II has a sensor element which consistsof a liquid-filled capsule with an immersedbellows and push rod;

� As the ambient temperature rises, the liquid inthe sensor’s metal capsule expands andcompresses the bellows, causing the integralpush rod to close the valve;

� As the room’s ambient temperature drops, theliquid in the capsule contracts, allowing thebellows to retract the push rod to open the valve.

Added Benefit:Another special feature of the TRV II is its twointegral locking pins, allowing you to lock thetemperature at one setting or limit it to a specificrange of temperatures. Refer to Valve Accessorieson page 7.

innovation.



1-800-698-9690

FULLFLOW RANGE VALVES G A B C D

WHEELHEAD ANGLE FF16WAC 1/2" 2-5/32" 1-3/4" 2-5/32" 1-17/32"

LOCKSHIELD ANGLE FF16LAC 1/2" 2-1/16" 1-3/4" 2-5/32" 1-3/8"

FULLFLOW RANGE VALVES G A B C D

A

D

B

C

D

B

C

A

Myson Fullflow Range ValvesThe MYSON Fullflow Heavyweight Valve is a high performancevalve for providing on/off control.

The non-rising spindle mechanism uses a double O-ring sealcapable of withstanding 145 psi at 245°F in either the full openor closed position. Because the applications to which theFullFlow is suited have higher operational demands, themechanism has been ingeniously designed to allowmaintenance while in service. The spindle may be removedfor servicing while the plunger remains securely sealed,preventing sudden escapes of system water.

The FullFlow handwheel and lockshield cover are manufacturedin high quality ABS and are screw-fixed to the valve spindle. Thehandwheel has a smooth appearance and easy-to-clean surface.

� Maximum operating pressure 145 psi

� Maximum water temperature 248°F

� Conforms to ISO-9002

� Available in high quality polished chrome finish.

� One valve for copper compression or iron pipe threads

� Double O-ring seal and non-rising spindle

� O-ring seal on union guarantees water tight seal

� Copper compression or female pipe thread inlet

� Outlet is 1/2" male BSPT

� All valves are shipped with the base tapped fornominal 1/2" threads and with a matching compressionnut and ferrule.

TURNS .25 .50 .75 1.0 1.25 1.50 1.75 2.0 2.25 2.50 2.75 3.0 3.25 3.50 3.75 4.0 4.25 4.50 4.75 5.0

VerticalAngle

0.22 0.36 0.55 0.80 0.96 1.10 1.26 1.51 1.71 1.88 2.07 2.29 2.46 2.62 2.76 2.97 3.13 3.31 3.43 3.57

StraightBody

0.29 0.35 0.43 0.51 0.61 0.71 0.79 0.87 0.97 1.06 1.13 1.20 1.27 1.32 1.36 1.40 1.43 1.45 1.47 1.48

LKD16SN 1/2" 15/16" 2" 3-1/8"

STRAIGHT BODY Size A B C

LKD16AN 1/2" 1-3/4" 1-1/32" 2-1/4"

Myson offers two adjustable valve bodies for Two-PipeHeating Systems: Vertical Angle and Straight Body

� Stamped Brass, Nickel Plated� Maximum Operating Pressure 145 psi� Maximum Water Temperature 248°F� Copper compression or female pipe thread inlet� Outlet is 1/2" male BSPT

Lockshield Body for Two-Pipe Heating Systems

C

A

B

VERTICAL ANGLE BODY Size A B C

B

A

C

To determine flow through the lockshield valves,choose the body style* and design pressure drop in psi.The chart below shows the Cv** factor for each styleand valve setting. Use this equation to calculate flow:

*Each valve body is shipped in the closed position**Cv=gpm@1 psi differential pressure

TURNS .25 .50 .75 1.0 1.25 1.50 1.75 2.0 2.25 2.50 2.75 3.0 3.25 3.50 3.75 4.0 4.25 4.50 4.75 5.0


Radiator ValvesMyson TRV II™ Radiator Valves 5

www.mysoninc.com

THEMO-ELECTRIC VALVE A B C

2TRVEL 024 1/2" 1-3/4" 2-7/8" 2-1/8"

A B D L

2-1/8" 1-9/32" 3-1/8" 3-1/8"

STANDARD CAPILLARY LENGTHS

6' 2TRVRA2 15' 2TRVAS5

A B D H L

1-1/8" 4-7/16" 1-15/16" 1-1/8" 3-9/16"


6' 2TRVRS2 15' 2TRVRS5


GB

M

Remote Sensor Remote AdjusterMyson’s Remote Sensor helps our valve do the job where astandard valve can’t.

Use our Remote Sensor when valve placement makes it difficultor impossible to sense air temperature correctly, such as when itmust be placed behind furniture or curtains, or when the valveis in direct sunlight. The TRV II is set and responds exactly as astandard valve, except that a length of capillary tubing connectsthe SENSOR to the VALVE.

Myson’s Remote Adjuster allows easy temperature controlwhere manual access to the valve would be difficult.

The Remote Adjuster can be wall-mounted anywhere from 6 to 15 feet away from the valve. The Remote Adjuster should be positioned where the air can continually pass freely over it.

Myson Thermo-Electric Radiator Valves may be used toaccurately control room temperature via a room thermostat orcentral control (thermostat and transformer are not provided).

These Myson Valves may be positioned behind long curtains, inboxes or in direct sunlight without loss of performance. Theroom thermostat is positioned on the optimal point on the walland can be used to control one or more Thermo-ElectricValves, giving equal temperature regulation throughout thecontrol zone.

An integral indicator gives visual confirmation of whether thevalve is open or closed.

Thermo-Electric Radiator Valves

D

L

B

A

D

L

A

H

B

A

CB

THERMO-ELECTRIC VALVE A B C

A B D H L STANDARD CAPILLARY LENGTHS A B D L

Performance00

.5

1.0

1.5

2.0

50 100

150

200

250

300

350

400

Time (sec)

Flo

wra

te(g

pm

)

00

.5

1.0

1.5

2.0

50 100

150

200

250

300

350

Time (sec)

Flo

wra

te(g

pm

)

OpeningCurve

s

ClosingCurve

s

24V Thermo-Electric Valve

SpecificationsElectro Head 2 TRVEL 024Operating Voltage 24V AC+/-10%Electric Input

-Temporary Operation 0.7A-(While Opening)-Continuous Operation 130mA,3W

Over Voltage Protection VaristorOperating Characteristics Closed when no currentOpening Time 3 minutesClosing Time 3 minutesStrokes .118" maximumAmbient Temperature 122°F maximumCable Length 40"Protection Class Class II, IP41



1-800-698-9690

HORIZONTAL ANGLE BODY G B L H* h*

2TRV16INP 1/2" 2-1/16" 1-7/16" 4-1/2" 3-1/8"

STRAIGHT BODY G B L H* h*

2TRV16SNP 1/2" 3-3/4" 1-3/8" 4-7/16" 3-5/32"

VERTICAL ANGLE BODY G B L H* h*

2TRV16ANP 1/2" 2-1/4" 1-1/16" 4-1/4" 2-15/16"

Thermostatic Body for Two-Pipe Heating SystemsThe engineering of the Myson TRV II ThermostaticRadiator Valve Body allows the valve to operate correctlyat all differential pressures, in either flow direction, withoutloss of performance. The Thermostatic Valve Body, forTwo-Pipe Heating Systems, is available in a Vertical Angle,Straight, and Horizontal Angle Body.

Features:

� Nickel Plated, Stamped Brass Body

� Maximum Water Temperature 248°F

� Commissioning Cap - White

� Copper compression or female pipe thread inlet

� Outlet is 1/2" male BSPT

Vertical Angle Body

Horizontal Angle Body

Straight Body

G

L

h

H

BG

G

L

h

H

B

G

G

L

h

H B

G

0.10.1

1

1

0.2 0.3 0.5 0.8

0.2

0.5

0.8

0.3

2 3 5 8

2

5

3

8

10

10Pressure Drop

[psi]

Flo

w[g

pm

]

Pressure Drop vs Flow

Full Open- DN 22 (3/4")

4˚FSetpoint (3/4")

Full Open - DN 16 (1/2")

4˚FSetpoint (1/2")

TRV II Flow Characteristics

H* fitted with 2TRV Head or 2TRV Head (Remote Sensor)h* fitted with 2TRV ADJ Head (Remote Adjuster)

VERTICAL ANGLE BODY G B L H* h*

STRAIGHT BODY G B L H* h*

HORIZONTAL ANGLE BODY G B L H* h*

Note: The valve opening is determined by thetemperature difference between the sensor (roomtemperature) and the setpoint on the valve. Typicaldesign calls for a 4°F setpoint difference, i.e. when theroom temperature at the sensor is 64°F and the TRVIIis set at a control temperature of 68°F (the III setting),the flow through the valve can be determined by the4°F Setpoint line shown in the figure above.

MYSON TRV valves maintain their quiet operation upto pressure drops of about 8 psi. To avoid water noiseor chatter, good design practice suggests that designpressures be kept below this threshold.


Notes

heatingthroughinnovation.

MysonComfort.com

heating innovationthrough

Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com

Radiators • Fan Convectors • Towel Warmers • Pex

Myson Comfort for all of your heating needs.

Date post:	30-Mar-2018
Category:	Documents
Upload:	phamdat
View:	215 times
Download:	0 times

Radiators - MYSON : Heating Through Innovation ! s old cast iron steam radiator on a cold winter...

Documents