Date post: | 24-Dec-2015 |
Category: |
Documents |
Upload: | dustin-doyle |
View: | 213 times |
Download: | 0 times |
Radio Controlled JeepRadio Controlled Jeep
Chris Venditti Chris Ayoub Daniel Girgis Jonathan Avalishvili Paul Grobelny Saiff Ezeldin
Technical Specs.Technical Specs.
• • Chassis: WR-02• • Scale: 1/10• • Front Tread• • Rear Tread• • Chassis: ABS Monocoque• • Suspension: 4 wheel independent• • Damper Type: Plastic coil over friction• • Drive Train: 2WD gearbox• • Gear Ratio• • Differential Type: Bevel Gear• • Motor Included: Electric type 540• • Speed Controller Included: 3 Step F&R Mechanical• • Wheel/Tire Type: Chrome/V-Lug Pattern• • Body Included: Styrene body is molded in a military green color• • Radio Type: 2-Channel Surface• • Battery Type: 7.2V Battery
ChallengesChallenges
• Intricate small connections
• Multiple gear assembly
• Complex A-arm geometry
• Synchronizing suspension systems
FrameworkFramework
• Anchor to all parts• Default section for assembly• Includes main chassis and transmission
SuspensionSuspension
• 4 wheel independent system• Plastic coil over friction shocks• Assembled using pin and cylinder connections
Suspension in MotionSuspension in Motion
TransmissionTransmission
• Outer casing houses motor and gears• Most complex assembly due to multiple gear
connections and relations. • Drives the vehicle• Rear wheel drive
Transmission and GearsTransmission and Gears
SteeringSteering
• High torque steering servo• Front wheel steering • Ball joint connections between front steering
knuckle and servo saver
Steering MechanismSteering Mechanism
Final AssemblyFinal Assembly
• Combining all working assemblies• A-arms use pin connections• Shocks use pin and cylinders• Transmission use rigid connection
• Driveshaft use Bearings
• All parts in working order
Finished ProductFinished Product
Jeep in MotionJeep in Motion