Date post: | 05-Apr-2018 |
Category: |
Documents |
Upload: | nasir-iqbal |
View: | 219 times |
Download: | 0 times |
of 15
7/31/2019 Radio Network Lab User Guide
1/15
Radio Network Lab User Guide Internal
Contents
1 Radio Network Lab User Guide.........................................................4
1.1 Introduction to Radio Network Lab..........................................................................................................................4
1.1 Introduction to Radio Network Lab..........................................................................................................................4
1.2 Precautions of Using the Radio Network Lab..........................................................................................................51.2 Precautions of Using the Radio Network Lab..........................................................................................................5
1.3 Operation Guide.......................................................................................................................................................6
1.3 Operation Guide.......................................................................................................................................................6
1.3.1 Operation Process...............................................................................................................................................6
1.3.1 Operation Process...............................................................................................................................................6
1.3.2 Creating an L2TP Connection............................................................................................................................7
1.3.2 Creating an L2TP Connection............................................................................................................................7
1.3.3 Logging In to the Equipment............................................................................................................................10
1.3.3 Logging In to the Equipment............................................................................................................................10
1.3.4 Exiting from the Network Lab..........................................................................................................................10
1.3.4 Exiting from the Network Lab..........................................................................................................................10
1.4 Applications of the Radio Network Lab.................................................................................................................11
1.4 Applications of the Radio Network Lab.................................................................................................................11
1.4.1 Network Topology...................................................................................................................................... ......11
1.4.1 Network Topology...................................................................................................................................... ......11
1.4.2 Hands-On Operations.......................................................................................................................................14
1.4.2 Hands-On Operations.......................................................................................................................................14
1.4.3 Associated Equipment .....................................................................................................................................14
1.4.3 Associated Equipment .....................................................................................................................................14
1.4.4 Contact............................................................................................................................................................. .15
1.4.4 Contact............................................................................................................................................................. .15
2012-5-28 Huawei confidential Page 1 of 15
7/31/2019 Radio Network Lab User Guide
2/15
Radio Network Lab User Guide Internal
Figures
Operation process..............................................................................6
Connect VPN dialog box.....................................................................8
VPN Properties dialog box..................................................................9
Advanced Security Settings dialog box..............................................10
WCDMA network topology................................................................11
GSM network topology.....................................................................13
CDMA network topology...................................................................14
2012-5-28 Huawei confidential Page 2 of 15
7/31/2019 Radio Network Lab User Guide
3/15
Radio Network Lab User Guide Internal
TablesAssociated user names and passwords used for the L2TP connection....7
Associated equipment......................................................................14
2012-5-28 Huawei confidential Page 3 of 15
7/31/2019 Radio Network Lab User Guide
4/15
Radio Network Lab User Guide Internal
1 Radio Network Lab User Guide1.1 Introduction to Radio Network Lab
The radio network lab is in compliance with the information security requirements. You can log
in to it through the VPN technology in the event that the internal network of Huawei.
You can access the radio network lab through the L2TP server.
Use the LMT and remote desktop to visit the network equipment.
Confirm the versions of equipment with the administrator because the versions are oftenupdated.
2012-5-28 Huawei confidential Page 4 of 15
7/31/2019 Radio Network Lab User Guide
5/15
Radio Network Lab User Guide Internal
1.2 Precautions of Using the Radio NetworkLab
Comply with the following requirements when using the radio network lab: Make an application before five days. You can use the radio network lab after the
application is approved.
Submit the application form by the email of [email protected].
Do not use other equipment except the specified equipment when using the radio network
lab.
Ensure that your operations comply with the application.
Access the internal network of Huawei to visit the radio network lab.
Apply for and install the corresponding LMT software in advance and ensure that your PCis safe before connecting to the network.
Download the corresponding hands-on SOW before making exercises , the links are asbelow.
Hands-on Practice Statement of the CDMA Remote Equipment RoomV1.0-20071211-A
Guide to GBSS Remote Hands-on Practice-20071211-A-V1.0
WCDMA RAN Remote LAB Networking and hand-on task-20071211-A-V1.0
2012-5-28 Huawei confidential Page 5 of 15
http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=detailProductSimple&web_doc_id=SE0000307999&doc_type=123-1http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=detailProductSimple&web_doc_id=SE0000308000&doc_type=123-1http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=detailProductSimple&web_doc_id=SE0000308001&doc_type=123-1http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=detailProductSimple&web_doc_id=SE0000307999&doc_type=123-1http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=detailProductSimple&web_doc_id=SE0000308000&doc_type=123-1http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=detailProductSimple&web_doc_id=SE0000308001&doc_type=123-17/31/2019 Radio Network Lab User Guide
6/15
Radio Network Lab User Guide Internal
1.3 Operation Guide
1.3.1 Operation Process
1.1 shows the operation process.
Figure 1.1 Operation process
Create the L2TP connection
Connect the network lab through the L2TP connection
Log in to the network lab through the associated LMT
Carry out hands-on tasks
Restore the initial configuration
Exit from the network lab
2012-5-28 Huawei confidential Page 6 of 15
7/31/2019 Radio Network Lab User Guide
7/15
Radio Network Lab User Guide Internal
1.3.2 Creating an L2TP Connection
WINDOWS XP Operating System
To create an L2TP connection, perform the following steps:
Step 1 Choose Start > All Programs > Accessories > Network Connections.
The Network Connections window is displayed.
Step 2 Select Create a new connection, and then click Next.
Step 3 Select Connect to the network at my work place, and then click Next.
Step 4 Select Virtual private network connection, and then click Next.
Step 5 Type the name of your workplace, and then click Next.
Step 6 Type the gateway address of the L2TP, such as 10.69.23.100, and then select Anyone's use.The associated user names and passwords used for the L2TP connection are listed in
6.
Figure 1.1 Associated user names and passwords used for the L2TP connection
Equipment L2TP GatewayAddress
User Name Password
GSM 10.69.22.3 gsm gsm
CDMA 10.69.22.2 cdma cdma
WCDMA 10.69.23.100 umts umts
----End
To set the properties of the L2TP connection, perform the following steps:
Step 1 Double-click the L2TP connection.
The Connect VPN dialog box is displayed, as shown in 1.1.
Step 2 Type the proper user name and password, select Save this user name and password for the
following users, and then select Me only.
Step 3 ClickConnect.
The VPN Properties dialog box is displayed, as shown in 1.2.
Step 4 ClickSecurity, select Advanced [customer settings], and then clickOK.
The Advanced Security Settings dialog box is displayed, as shown in 1.3.
Step 5 Select Allow these protocols, and then select the required protocols, including Unencryptedpassword [PAP], Microsoft CHAP [MS-CHAP], and Microsoft CHAP Version 2 [MS-CHAP
v2].
2012-5-28 Huawei confidential Page 7 of 15
7/31/2019 Radio Network Lab User Guide
8/15
Radio Network Lab User Guide Internal
Figure 1.1 Connect VPN dialog box
2012-5-28 Huawei confidential Page 8 of 15
7/31/2019 Radio Network Lab User Guide
9/15
Radio Network Lab User Guide Internal
Figure 1.2 VPN Properties dialog box
2012-5-28 Huawei confidential Page 9 of 15
7/31/2019 Radio Network Lab User Guide
10/15
Radio Network Lab User Guide Internal
Figure 1.3 Advanced Security Settings dialog box
----End
1.3.3 Logging In to the Equipment
After accessing the network lab through the L2TP connection, log in to the equipment through
the associated LMT. You need to apply for the management address of the equipment, and theuser name and password of the LMT.
1.3.4 Exiting from the Network Lab
Before exiting from the network lab, you need to restore the equipment to the initialconfiguration. For details about how to restore the equipment to the initial configuration, refer
to theHands-On SOW.
2012-5-28 Huawei confidential Page 10 of 15
7/31/2019 Radio Network Lab User Guide
11/15
Radio Network Lab User Guide Internal
1.4 Applications of the Radio Network Lab
1.4.1 Network Topology
1.1 shows the WCDMA network topology.
Figure 1.1 WCDMA network topology
2012-5-28 Huawei confidential Page 11 of 15
7/31/2019 Radio Network Lab User Guide
12/15
Radio Network Lab User Guide Internal
2012-5-28 Huawei confidential Page 12 of 15
7/31/2019 Radio Network Lab User Guide
13/15
Radio Network Lab User Guide Internal
1.2 shows the GSM network topology.
Figure 1.2 GSM network topology
2012-5-28 Huawei confidential Page 13 of 15
7/31/2019 Radio Network Lab User Guide
14/15
7/31/2019 Radio Network Lab User Guide
15/15
Radio Network Lab User Guide Internal
1.4.4 Contact
Raise your doubts and offer your suggestions through email. The email address is wireless-
2012-5-28 Huawei confidential Page 15 of 15