RAID-M 100Hand-held Chemical Agent Monitor

Bru

ker

Dal

toni

cs is

con

tinua

lly im

prov

ing

its p

rodu

cts

and

rese

rves

the

rig

ht

to c

hang

e sp

ecifi

catio

ns w

ithou

t no

tice.

© B

DA

L 0

6-2

012

CB

RN

#28

510

0

Defence CBRNEInnovation with Integrity

The RAID-M 100 is a hand held Chemical Agent Detector based on the well estab-lished principle of Ion Mobility Spectro-metry. It is designed to detect, search for and locate Chemical Warfare Agents (CWA) on personnel, equipment, vehicles and on the ground. Applications within collective protection facilities are also possible.

General specification

The RAID-M 100 is able to detect, classify and identify, quantify and conti-nuously monitor concentration levels of the CWA’s specified.

The identity of substances detected is displayed by its standard code (GA, VX, etc.) or its appropriate abbreviation (e.g. GSI for the G-mode simulant). For each class (G, H and T) a separate bar line is provided, thus all the classes may be monitored independently. Hazard levels are indicated by an incremental bar level display with eight increments. Moreover the RAID-M 100 gives an audible and an optical alarm when identifying an agent.

The RAID-M 100 provides very low detection limits and short response times. Due to the state of the art measu-ring cell and highly sophisticated soft-ware nerve agents can be detected at lowest levels. Short recovery times are achieved by an automatic purge mode.

Data logging system

The RAID-M 100 is equipped with a data logging system that is capable of continuous data monitoring. The two integrated data loggers are able to record independently from each other individual spectra (Spectrum-Logger) as well as the results of a measurement campaign (Event-Logger). Both can be configured independently. The capacity of the event logger is about 3000 events that can be stored, whereas the spectrum logger keeps 30 full spectra for subsequent inspection e.g. of unknown compounds. Access to such data is possible via the standard software RAID EventReader, no additional software is necessary.

RAID-M 100 used in the Field

Display

Key operation field

Visual alarm

Identification and bar display

Portable and one handed to operate

The RAID-M 100 is portable with a carrying sling. Likewise it can be installed on a vehicle and ship mounting. In addition the equipment is capable of operation within collective protection facilities.

Vehicle and shipboard integration

Remote control unit and vehicle mounting are offered as optional components to support the vehicle or shipboard installations of RAID-M 100 instruments.

By means of an EMC unit the RAID-M 100 can be powered with 12 – 32 V.

Protected from any hazardous chemicals the soldier, fireman or any other user easily operates the RAID-M 100 from inside the vehicle or ship.

Reliable Mobile Detector

Basic set

Remote Control Unit

RAID-M 100 with vehicle mounting

Data and power cable with power supply 12 VDC / RS232

Battery charger Li-lon/EU with battery adapter

Protective bag

1 Li-Ion rechargeable battery pack

Confidence tester for both modes

Carrying sling Manual

Transport and storage container

RAID-M 100

Visual alarm

Anti-terrorism Homeland defense First responder market Non-proliferation measures Real time monitoring of toxic

and hazardous industrial chemicals in the environment Fire fighting control Chemical disaster management

RAID-AFM (NC version)

Stationary detector for critical infrastructure protection

RAID-XP

Innovative mobile NC Detector

Fields of Application

RAID-S2

Mounted gas trace detector for long term operation

RAID-M 100 available for homeland defence market

RAID-M 100 with vehicle mounting

RAID-series product line

Control and Data System XIMS-NT

Features of Bruker XIMS NT

IMS instrument control and data acquisition of the detector IMS spectra processing and analysis

of two- and three-dimensional IMS spectra on the PC Substance identification and

quantification Library Editor for ion mobility

spectra libraries

Network operation with the NC monitoring software

Application of several RAID (Rapid Alarm Identification Device) gas trace detec-tors and Bruker SVG2 radiation meters in one networking system for remote monitoring of hazardous compounds and remote instrument control. The system can be integrated into other control and alarm systems.

IMS spectra acquisition and substance identification with Bruker XIMS NT.

XIMS-NT IMS Spectra evaluation software

NC Monitoring software

Monitoring System consisting of one SVG2, three RAID with different views and one Remote Alarm Unit.

Our product line for chemical, biological, radiological and nuclear detection

Nuclear & Radiation DetectionRAID-XP, RAID-AFM (NC version) Innovative and flexible instruments for NC detection

Biological Agent DetectionpTD Automated on-site detection of toxins

MALDI Biotyper Software tool for reliable identification of unknown microorganisms (BWA)

Chemical Warfare Agent Detection

MM 2 Mobile Mass Spectrometer for reconnaissance vehicles

RAID series Rapid Alarm and Identification Devices based on proven IMS technology

RAPID FT-IR Stand-off detector for atmospheric pollutants

Personal Chemical Agent Detector

µRAID The compact, flexible and reliable personal detector

Chemical Emergencies & Demilitarisation

E2M Enhanced Environmental Mass Spectrometer for mobile on-site analysis

Length x Width x Height 400 x 115 x 165 mm

Weight2,9 kg

Power requirement 12 ... 32 V DC (detector module)100 - 240 V AC / 47 -63 Hz (data andpower cable with power supply)

Temperature range -30 – 50 °C

Radiation active source63Ni of 100 MBq activity (below theEuropean exemption limit) (370 MBq on request)

Environmental testingAccording to MIL STD 810F (US) and DEF STAN 00-35 (UK)

Substances detectable(List not exhaustive)CWA’s: GA, GB, GD, GF, VX, HD, HN, L, ACTest substances: DPM (GSI), MSAL (HSI)Toxic Industrial Chemicals: CL2, Chloride (CLX), Cyanide (CY), SO2, Toluene diisocyanate (TDI)

Detection rangelow ppb up to several ppm (substance specific)

BatteryLength x Width x Height: 130 x 70 x 36 mm

Weight560 g

RAID-M 100 is powered from an integral, rechargeable lithium ion

battery pack

Spare parts No requirement to change consumable

when RAID-M100 detects a challenge, any consumables used are kept to a minimum.

Dust, purge and drying filters can be exchanged by the operator.

Technical Specifications

Bru

ker

Dal

toni

cs is

con

tinua

lly im

prov

ing

its p

rodu

cts

and

rese

rves

the

rig

ht

to c

hang

e sp

ecifi

catio

ns w

ithou

t no

tice.

© B

DA

L 0

6-2

012

CB

RN

#28

510

0

Bruker DetectionDivision of Bruker Daltonik GmbH Zweigniederlassung Leipzig

Leipzig · GermanyPhone +49 (341) 2431-30 Fax +49 (341) 2431-404 detection@bruker.com

Bruker DetectionDivision of Bruker Daltonics Ltd.

Coventry · United KingdomPhone +44 (2476) 855-200Fax +44 (2476) 465-317detection@bruker.com

Bruker Detection Corp.

Billerica, MA · USAPhone +1 (978) 663-3660Fax +1 (978) 667-5993 detection@bruker.com

www.bruker.com/cbrne