by D
B A
G /
Web
er
Rail Car Pressure Gauges
ARMATURENBAU GmbH
MANOTHERM Beierfeld GmbH
Q
DIN ISO
2 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
Since many years we deliver pressure gauges in various confi gurations to operators, manufacturers and suppliers of
Rail cars of domestic and foreign rail car companiesUndergroundsTramways Locomotives for surface miningQuayside railways
and others.
MANOTHERM Beierfeld GmbH was founded as subsidi-ary company of ARMATURENBAU GmbH in 1991.The company was based on the former Messgerätewerk Beierfeld which passed into private hands. Since a coup-le of decades already almost all pressure gauges for the former ˝Deutsche Reichsbahn˝ were manufactured at our Beierfeld location.The range of these products was permanently improved and extended for the international market.
MANOTHERM Beierfeld GmbH is accredited Q1-Sup-plier of the Deutsche Bundesbahn AG (German Federal Railways). This means a high quality standard of the pro-duction, and of the delivered pressure gauges.
The ARMATURENBAU GmbH as well as theMANOTHERM Beierfeld GmbH are certifi ed according to DIN EN ISO 9001 since many years.
Further more, MANOTHERM Beierfeld GmbH has got the required GOST model and customs approvals for the export to Russia, the Ukraine, and Kazakhstan.
Our Experience - Your Advantage
Quality as Our Highest Aim
by D
B A
G /
Jazb
ec
by D
B A
G /
Web
er
,
3 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
As the result of our long-time experience with our customer's various demands on pressure gauge fea-tures we developed a new series:
the standardized
Combi Gauge,
manufactured in series with
direct lighting and
indirect lighting.
One and the same standard pressure gauge can be ap-plied for both methods of lighting. This can help you to save storage expenses!
On top of that, our Combi Gauges show the following advantages:
United front appearance (now for all available case diameters!)
Numerous variations / options
Minimized front-to-back sizes and reduced weights
Reliable pressure measurement
Comfortable reading
Long service life
One Solution for All Rail Cars
by D
B A
G /
Web
er
by D
B A
G /
Spi
elho
fen
BAs
•
• BAs
IP
Blow-outSEN
The Case - Handy and Secure
4 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
The Lighting
Our Combi Gauges have a case with black anodized crimped-on ring.
The equal appearance of the pressure gauge front side makes a good impression at every driver's compart-ment.
The instruments are protected against ingress of humidi-ty in front of the panel (IP 54).
All our Combi Gauges are provided with a U-clamp for panel mounting by default.
Due to the blow-out device in the case back, all our Com-bi Gauges comply with the safety pattern S1 according to EN 837-1.
Indirect Lighting
The pressure gauges can be illuminated by the driver's compartment lighting through lighting apertures in the case, without any separate electrical power supply.
Direct Lighting
A light bulb BA7s (24 V DC, 3 W) is provided for direct lighting.A light guide ring distributes the light optimized across pointer and dial.One single light bulb is suffi cient for the complete lighting of the whole gauge in all nominal case sizes (NCS)!
Optionally available for NCS 80 (3") and 100 (4"):
• LED lighting for operating voltages of more than 24 V DC up to max. 110 V DC
• Light bulb BA9s (24 V DC, 2 W)
by D
B A
G /
Web
er
Variety for Individual Demands
Rail Car Specialties
5 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
Our Combi Gauges combine by default many features that are required for the applications at very different kinds of rail cars.
Nevertheless, there are still many options and versions available to ensure that you receive exactly the suitable pressure gauge for your demands:
Different kinds of process connections
Special coloured design of the dial and scale
Individual, coloured dial inscriptions matching the application purpose
Coloured pointer design
Calibration for special fi tting positions
Other pressure units
and others more.
A good standard helps to simplify things and to make them straightforward – and saves expenses.But still it should always be possible to meet the individu-al and varied requirements even for very special applica-tions and demands.
You need a very special type of pressure gauge for rail cars?
We manufacture for you the pressure gauges as desired. On pages 10 and 11 you will fi nd some examples of pres-sure gauge versions that we manufacture additionally to our Combi Gauges on customer's requests.
Ask us, if you need a special pressure gauge version!
by D
B A
G /
Jazb
ec
EN
6 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
The SelectionThe selection criteria for Bourdon tube pressure gauges are described in EN 837-2.
Combi Gauges are available in two basic versions:
with one Bourdon tube
as duplex pressure gauge with two Bourdon tubes
Single Bourdon tube gauges are applied e. g.for separate compressed air pressure measurement of a brake cylinder or at the temporal reservoir of pneumatic brake systems.
You can fi nd a detailed description in our data sheet 1901.
Duplex pressure gauges serve for reading two sepa-rate pressures at the same time, e.g. the pressures at the brake cylinders of two bogies or of the main air reser-voir pipe and the main brake pipe of a pneumatic brake system.
The pressure gauges are provided with two indepen-dently working measuring systems. A special duplex movement with two pointer arbors transfers the pressure caused motion of the Bourdon tubes to the pointers. The pressure connections are marked with a coloured spot, equal to the pointer colour.
You can fi nd a detailed description in our data sheet 5901.
by D
B A
G /
Web
er
DINEN
60, 63 80, 100
0- 1,6 — 0,05 0,05
0- 2,5 0- 2,5 0,1 0,05
0- 4 0- 4 0,2 0,1
0- 6 0- 6 0,2 0,1
0-10 0-10 0,2 0,2
0-12 0-12 0,2 0,2
0-16 0-16 0,2 0,2
EN
-40 °C +70 °C -40 °C +60 °C +60 °C
(90° ± 5°)
Standard Pressure Ranges in bar (complying with DIN 38030/EN 837-1)
SinglePressure Gauge
Duplex Pressure Gauge
Subdivision
NCS 60, 63(2½")
NCS 80, 100(3", 4")
0- 1,6 — 0.05 0.05
0- 2,5 0- 2,5 0.1 0.05
0- 4 0- 4 0.2 0.1
0- 6 0- 6 0.2 0.1
0-10 0-10 0.2 0.2
0-12 0-12 0.2 0.2
0-16 0-16 0.2 0.2
Pressure Limitations (EN 837-2)
At static pressure: 75%
At cyclic pressure: 65%
of full scale value
Overpressure: max. full scale value
Temperature LimitationsStorage/transport: -40 to +70 °C (-40 to +158°F)Operation: Ambient -40 to +60 °C (-40 to +140 °F) Medium max. +60 °C (+140 °F)
DialBlack, white scale, with zero stop (stop pin)
Options: Different colours Coloured markings Coloured inscriptions Luminesce scale
PointerAluminum, colour selectable: red, white, yellow
Fitting PositionStandard is vertical (90° ± 5°)
Special Versionse. g. for load changes up to 1.000.000or special versions according to your demands (drawing) can be manufactured and deliverd within short time!
Technical Data in Common
7 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
by D
B A
G /
Jazb
ec
: Rg 60–1 Fz Chg 80–1 Fz RChg 100–1 Fz
Blow-outSEN
EN 837-1 60: 1,6 80, 100: 1,0
EN ISO 8434/1L Mx
LMx
BA7s,
Combi Gauge Models R...
8 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
Instruments for One Pressure Pipe
Models: Rg 60–1 Fz RChg 80–1 Fz RChg 100–1 Fz
CaseDiameter/nominal case sizes (NCS) 60, 80, 100,with black ring, crimped-on, (2.36", 3", 6")
blow-out in the back of the case,safety pattern S1 according to EN 837-1,U-clamp for panel mounting
WindowSingle strength glassAt option: glare-free and fail-safe safety glass window
Pressure Ranges0-1.6 to 0-16 bar
Accuracy Classes (EN 837-1)NCS 60 (2.36" ): 1.6NCS 80, 100 (3", 4"): 1.0
Process ConnectionBrass, center back,according to EN ISO 8434-1,NCS 60: L6 (M 12 x 1.5 with chuck cone, (2.36") including cutting ring and union nut)
NCS 80, 100: L10 (M 16 x 1.5 with chuck cone, (3", 4") including cutting ring and union nut)
LightingDirect by light bulb BA7s,indirect by lighting apertures in the case
Details and options: Data sheet 1901.
by D
B A
G /
Kle
e
Combi Gauge Models R...
DIN 38 030:2008
according to DIN 38 030:2008
Combi Gauge Models DR...
: DRg 60–1 Fz DRChg 80–1 Fz DRChg 100–1 Fz
Blow-outS1EN
0-2,5 0-16
(EN 837-1)HP 60 : 1,6HP 80, 100: 1,0
EN ISO 8434-1,HP 60 : 2x L6 (M 12 x 1,5 )HP 80, 100: 2x L10 (M 16 x 1,5 )
BA7s,
9 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
Instruments for Two Pressure Pipes
Models: DRg 60–1 Fz DRChg 80–1 Fz DRChg 100–1 Fz
CaseDiameter/nominal case sizes (NCS) 60, 80, 100,with black ring, crimped-on, (2.36", 3", 6")
blow-out in the back of the case,safety pattern S1 according to EN 837-1,U-clamp for panel mounting
WindowSingle strength glassAt option: glare-free and fail-safe safety glass window
Pressure Ranges0-2.5 to 0-16 bar
Accuracy Classes (EN 837-1)NCS 60 (2.36"): 1.6NCS 80, 100 (3", 4"): 1.0
Process ConnectionsBrass, center back parallel one above the other,according to EN ISO 8434-1,NCS 60: 2x L6 (M 12 x 1.5 with chuck cone, (2.36", 2½") including cutting ring and union nut)
NCS 80, 100: 2x L10 (M 16 x 1.5 with chuck cone, (3", 4") including cutting ring and union nut)
LightingDirect by light bulb BA7s,indirect by lighting apertures in the case
Details and options: Data sheet 5901.
by D
B A
G /
Web
er
Combi Gauge Models DR...
DIN 38 030:2008
according to DIN 38 030:2008
RB, RCh, RChg, RK
0-6 , 0-10 , 0-12 0-16 M 20 x 1,5,
Rail Car Gauges Specialties
10 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
DIN 6697 Pm 160–2 DIN 6697
RChgG 63–1 rmFr, 0-1,4-4
0-1,4 240°,
2,5 , , ,
For Tank Wagons
For Various Applications
For the pressure monitoring at tank wagons for dustlike goods we manufacture:
e. g. Diaphragm pressure gauges with connection according to DIN 6697 ("coal dust fl ange")
Model: Pm 160–2 DIN 6697 Details: Data sheet 3110
e. g. Bourdon tube pressure gauges with crimped-on ring stainless steel
Model RChgG 63–1 rmFr, 0-1.4-4 bar in special version
With front fl ange for panel mounting
Expanded scale 0-1,4 bar over 240°,
red mark at 2.5 bar,
special calibration for differing pressure rates: at test operation (1 bar), at transport (0.5 bar), at unloading (2.5 bar)
Details upon request
Besides our optimized Combi Gauges for pressu-re measurement at pneu- matic brake systems, we supply pressure gauge versions for any applica-tions, e. g for replacement requirements.
Here you fi nd just a few examples from our large choice:
Bourdon tube pressure gauges with standard cases black or stainless steel
Models e. g. RB, RCh, RChg, RK
With rear mounting fl ange for wall mounting or U-clamp for panel mounting
Case: Nominal sizes 63, 80, 100, 160, (2½", 3", 4", 6") alloy steel, stainless steel, or polyamide 6B
Pressure ranges: Selectable, typically: 0-6 bar, 0-10 bar, 0-12 bar, and 0-16 bar
Connection: e. g. M 20x1.5 bottom brass
Details: Model overview 1000 and e.g. data sheets 1101, 1201, 1211, 1203, 1300
RChgG 63–3 rFr
G¼
Rail Car Gauges Specialties
11 AwB 33 6/06 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH
RÜ 130–1 rBFr
DRÜ 130-1 rBFr
L 10 (M 16 x 1,5 ) BA9s
Single Bourdon tube gauges andDuplex Bourdon tube gauges
Models RÜ 130–1 rBFr DRÜ 130-1 rBFr
U-clamp for panel mounting
Case: Diameter (NCS) 130 (5") with black bezel ring
Pressure range: Selectable, typically: 0-12 bar
Dial Aluminum black
Scale: White, inscription as ordered
Connection: e. g. L 10 (M 16 x 1,5 with chuck cone, including cutting ring and union nut)
Lighting: Indirect (lighting apertures in the case), direct (light bulb BA9s 24V/2W)
Details: Upon request
RB, RChg, RCh, RK
G ½ B
7/16"-20 UNF DIN 3866 63, 80, 100, 160 -1/+15 , -1/+24 , -1/+30 T01-000-015 /
Bourdon tube pressure gauge with crimped-on ring stainless steel
Model RChgG 63–3 rFrWith front fl ange for panel mountingTightness tested with helium leak detection
Case: Stainless steel Case fi lling: Glycerine 86.5% Pressure range: 0-16 bar et. al. Connection: G ¼ B (¼" BSP) lower back connection stainless steel Details: Data sheet 1212
Bourdon tube pressure gauges, various casesModels e.g. RB, RChg, RCh, RK
With front mounting fl ange or U-clamp
Combined scale pressure/temperature for refrigerants
Connection brass or stainless steel G ½ B (½" BSP) or others, e. g. 7/16"-20 UNF acc. to DIN 3866
Case: Nominal sizes 63, 80, 100, 160, (2½", 3", 4", 6") alloy steel, stainless steel, or polyamide 6B
Pressure ranges: -1/+15 bar, -1/+24 bar, -1/+30 bar and others
Dial: Aluminum white
Scale: Black for pressure, coloured for refrigerant
Details: T01-000-015 / catalogue rubric 1
For Magnetic Brakes
For Air Conditioners
Special Sizes
ARMATURENBAU GmbHManometerstraße 5
D – 46487 Wesel–GinderichTel.: +49 (0) 28 03 / 91 30 – 0
Fax: +49 (0) 28 03 / 10 35 [email protected]
http://armaturenbau.dehttp://armaturenbau.com
Am Gewerbepark 9D – 08344 Grünhain-Beierfeld Tel.: +49 (0) 37 74 / 58 – 0Fax: +49 (0) 37 74 / 58 – [email protected]
http://manotherm.dehttp://manotherm.com
Subsidary Company and Sales East Germany and Eastern Europe
MANOTHERM Beierfeld GmbH
The Experts for Pressure and Temperature Measurement
AwB 33 6/06
Cop
yrig
ht fo
r al
l pic
ture
s of
rai
l car
s, d
river
‘s c
ompa
rtm
ents
, and
for
the
cove
r ba
ckgr
ound
pic
ture
: Die
Deu
tsch
e B
ahn
AG
and
the
phot
ogra
pher