RANDCASTLE’SBlown Film Lines
1 TO 15 LAYERS
Tablemountedextruders
3 LAYER2 EXTRUDER LINE
Single lipair ring and
expandable 3 inch“pancake” style die
Adjustableheighttower
Patents: 5,486,3285,518,672, and 5,569,429 other USand foreign patentspending.
MONOLAYER BLOWN FILM LINESINTRODUCTION: Randcastle blown film (less than 0.010 inch) extruders melt and pump the polymer through an
annular die. The film is drawn by the nip rolls as a bubble over low pressure air (inserted through the die) becoming
thinner as it is drawn. A blower supplies air to an air ring which cools the film. Our blown film lines make film from
about 1 to 18 inches wide making them ideal for research, development,and quality control applications.
TECHNOLOGY: Randcastle is a technology driven company focusing on small diameter extrusion lines. We
start with the patented Microtruder vertical screw extruder with screws up to four times stronger than the same
horizontal extruders; they feed much better and surge far less. Our exclusive smooth bore feed sections give you
unparalleled processing flexibility. Add the inexpensive on-line rheometer measure viscosity and you can link flow
and film properties. Our spiral dies remove weld lines yet are viscosity insensitive so you can process a much
broader range of materials and still make uniform film. Our single lip air ring converts into a dual lip rings just in case
your applications change. Randcastle towers include low friction collasping canopies and different style winders.
Compact bench or floor mounting saves space for all your lab applications.
F l o o r m o d e ltower is availablefor hor izonta lextruders too.DC Drive
Winder
Low frictioncollasping canopy
Low frictionbubble guides
Dual lipair ring(shown)
Spiral die
Blower hoses
This ‘dedicated’blown film line isextremely compact.Mounting the blowerunder the shroudmakes for quieteroperation.
BENCH OR FLOORMODEL DESIGNS
Adjustableheight tower
Extruder controlpanel with nip rolls and blowerspeed control
MONOLAYER BLOWN FILM LINESRCP-0625 MICROTRUDER WITH 0.625 INCH DIE
MAKES 3 TO 4 INCH LAYFLAT
This bench mounted line, complete with in-line rheometer, fits into a tiny 30 x 65 inch space. It can be equipped with a compounding screw up to 50:1 L/D and four Recirculating mixers. Use a single heat history to make the best films. The Recirculating mixer has been shown to make thinner films at lower temperatures.
Winder
CollapsingCanopy
Bubbleguides
Rheometer
Air ring.
Tower Controls
RheometerPanel
Extruder Panel
RCP-1250 1.25 inch MICROTRUDER WITH 3 INCH DIE
Adjustable height tower
This caster equipped floor mounted has a 10 HP drive for high torque applications. The low centerline extruder places the tower at a convenient working height.
High HP AC Vector Drive
COEXTRUSION BLOWN FILM LINES2 TO 15 LAYERS
2 TO 8 EXTRUDERSEXPANDABLE PANCAKE DIES: The heart of a coextrusion blown film line is the die and lab dies must be flexible. Unlike most lab dies, we evenly divide the flow for each material to form concentric layers. We designed the die and base for expansion so a two layer line can be expanded to 15 layers and 8 extruders. Plus, the tiny footprint(see drawing back page) saves valuable space. Remember, old spiral dies only work for a narrow range of viscosity. Your lab applications may not stay in that range. Randcastle pancake dies assure uniform layering.
3 EXTRUDER 5 LAYER LINE 6 EXTRUDER 11 LAYER LINE
Space Saving
Designs!
World record holder!
FOUR 1.25 INCH EXTRUDERS, 7 LAYERS, 4 INCH DIE.
Features: Dual Winders AC Vector drives Adjustable height tower Expandable pancake die
For more information on Randcastle’s line, contact:
Randcastle Extrusion Systems, Inc.74 Sand Park Rd.Cedar Grove, NJ 07009-1210 USA
Tele: 973-239-1150Fax: 973-239-0830email: [email protected] Site: www.randcastle.com
Other Randcastle LinesRandcastle lines are available from 1 to 15 layers with up to 8 extruder inputs. The drawings below
including a state of the art 11 layer blown film line. Call for information on our other lines.
show a sampling of lines
Two 1 InchMicrotruders
Four 1.25 Inch Microtruders
AdjustableHeight Tower
Free StandingBase
Sheet Sheet Tubing 5 Layer Bench Line Floor Model With Laminating Payoff Up To Three Layers
Compounding/Pelletizing Monofilament
Blown Film Coextrusion Blown Film ¾ Inch Dedicated Line Six Extruder, 11 Layer Line