Date post: | 06-Aug-2015 |
Category: |
Business |
Upload: | gerbrig-weerstand |
View: | 35 times |
Download: | 0 times |
• destroys rust in the core
• can be painted over with 1- of 2
component primer
• gives good adhesion to coating
• removes ruststreaks and grinderdust
• removes lime scale
• has no adverse effect on the quality ofsteel, coating, rubber and gelcoat (grp)
• fast, easy and effective
• 1 liter per 10m2 rust treatment
• can be apllied on steel, stainless steel,chroom, gelcoat and coating
• do not use on cement, marble, stoneand antifouling.
after
Ranex Rustbuster converts rust from a detrimental oxide to a beneficial fosphate of iron. After the drying process (24 hours) the rust is completely destroyed and the surface is ready to be coated with each 1- or 2 component primer. Recommended not use waterbased and sinc-rich coatings. .
Without coating, the Ranex Rustbuster treated surfaceis protected during a few weeks by sulphate.
RANEX RUSTBUSTERINDUSTRIAL STRENGTH
before
Dealer:
Durable for materials and coating by professionals
RANEX RUSTBUSTERThe metal care solution
Importeur Ranex RustbusterIndustrial StrengthThe NetherlandsTelefoon: +31 655308639E. [email protected]. www.ranexrustbuster.nl
Ranex RustbusterThe metal care solution
Available in 1 LITER, 4 LITERSand 20 LITERS
The benefits
With a density of 1.4 Ranex Rustbuster penetratesdeep into the surface to destroy rust. As a result therust is made inactive from the inside. By the lowsurface tension Ranex Rustbuster reaches the hard-to-reach areas.
• Government
• Marine
• Offshore
• Shipbuilding
• Fishery industry
• Public transport
• Pleasure boating
• Cleaning companies
• Renovation projects
Ranex Rustbuster is easy in use, it works fast, efficientand throuroughly. Ranex Rusbuster has a chemicalcompound on rust and lime, but has no adverseeffects on materials and coating. The residualproduct is an inactive substance, a beneficialphosphate of iron.
RANEX RUSTBUSTER is used in and by:
How it works
Conclusion
The metal care solution
Chemical surface (rust) treatmentunderwater hull tug
Treated with Ranex Rustbuster,chemically destroying any rust presentand leaving the surface in a suitablecondition for coating when completelydry (24 hours)
Over Ranex Rustbuster
• Application on:
• steel, stainless steel, chroom
• coating, gelcoat (GRP)
• rubber, glas
Ranex RustbusterRustSteelTreated surfaceready for coating
Chemical surface treatment is fast and eco-friendlyto perform.
The most important advantages are the efficient andhigh quality operation and even a temporaryconservation in one treatment.
Removing rust by a chemical process is a fast, easyand effective way and a very good alternative forblasting and sanding.
Over more than 50 yearsexperience in the fight against rust
before the process after