Ranger 2010 Catalog

The Benchmark of QualityTM

2010AUTOMOBILESERVICEE Q U I P M E N T

22

Tilt-Back Arm

Features / Specs Features / Specs Features / Specs

Wheel Service Equipment

Dual Power-Assist Tilt-Back R-26EXHigh Performance Tire ChangerNow you can have 26” of external clamping performance without the clumsy adapters or cumbersome table-top adjustments. This is absolutely the fastest and most trouble-free way to service low-profiles, run-flats and high-performance alloy wheels. Designed with the operator’s comfort and efficiency in mind, the model R-26EX reduces fatigue and boosts efficiency. Perfect for high-volume tire shops where large, low-profile tires are a growing part of your business. The Model R-26EX takes on the widest wheels and the most stubborn tires with ease. Features include an exclusive dual-pneumatic power assist

capable of flexing even the stiffest sidewalls and a power taper roller for easy bead lubrication and mounting. A special total rim protection package protects even the most delicate wheels through the entire process.

Traveling Drop-Center Helper

Pneumatic Wheel Restraint Device

Power-Assist Upper Bead Roller

Dual Power-Assists with bead roller, bead hold down Device and dual swing-in bottom helper disks

Oversize Table Top provides 26” outside clamping with no adapters or adjustments needed

Includes a FREE Wheel Protection Kit

• Type of Drive System: ............................ Electric / Air• Motor: ...........2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement: ................ 110-175 PSI / 8-12 BAR• Wheel Clamping Method: .......................4 Clamps - Internal / External• Table Clamping System: .... Dual Pneumatic Cylinders• Bead Breaking System: .................. Pneumatic Blade• Power-Assist Towers: ....................................... Dual• Air-Lock Mounting Tool Holder: ....................Standard• Inflation Gauge With Integrated Air Dump Valve: ..........................Standard• Inflation Pressure Regulator/Limiter: ............Standard

• Water Filter: ...............................................Standard• Oiler / Lubricator: .......................................Standard• Air Regulator: .............................................Standard• Breaker Bar: ..............................................Standard• Large Soap / Lubricator Bucket: ..................Standard• Brush: .......................................................Standard• Tilt-Back Tower: .........................................Standard• Lower Bead Lifting Roller: .............Dual / Left & Right• Upper Bead Assist Roller:............................Standard• Traveling Drop-Center Hold Down Device: .....................................Standard• Inflation Restraint Device: ...........................Standard

• Powerful “Jet-Blast” Bead Seating System: ........................................Standard• Tool Tray / Bin Storage: ...................................... Two• Internal Clamping Capacity: ........... 14-1/2” – 28” (368 mm - 711 mm)• External Clamping Capacity: ........... 12-1/2” – 26” (317 mm - 660 mm)• Turntable Tire Width Capacity (Mounting): ...5” – 22” (127 mm – 559 mm)• Bead Breaker Tire Width Capacity (Demounting): ..............3” – 15” (76 mm – 381 mm)• Maximum Tire Diameter: .................. 47” (1194 mm)• Shipping Weight: ......................... 1175 lbs. (533 Kg)

To learn more about the Ranger Products line, visit www.rangerproducts.com or call 1-800-253-2363

33

Features

Specifications

Super-Duty R-2600HDTruck Tire ChangerThe Ranger R-2600HD is an incredibly fast and efficient large tire changer. Swap out tubeless truck, agricultural and off-road tires from 14” to 26” in just minutes. A portable remote control brings convenient precision to your finger tips and saves you precious time. We’ve thoroughly explored all aspects of truck wheel service to develop the quickest large tire changer possible. Experience your shortest floor-to-floor service times ever, making your job easier and more profitable. All of our changers are built with forged, hardened, and ground components designed to resist scoring, grooving, and wear. Our engineers understand that speed, convenience and safety are your top priorities, so we’ve made them ours!

• Super-duty electric motor and hydraulic drive for superior torque and wheel holding power• Self-centering hydraulic clamping chuck• Heavy, tapered roller bearings, and a dual direction hydraulic motor provide smooth torque• Quick positioning and locking mount/demount arm• Hydraulic sled carriage for positioning, bead loosening, mounting, and demounting procedures• Single piece frame for superior rigidity• Hydraulically operated spreader-type jaws ensure secure clamping of virtually all rims and off-road style wheels• Massive chuck spindle handles the heaviest loads• Sturdy spindle, chuck and mount-demount head hydraulically rotates, raises, and lowers with simple operator controls• Simple design is easy to use• Very gentle on over-the-road tires and tubeless tires mounted on aluminum wheels

• Standard Voltage: ....................................................... 208 - 230V / 60 Hz / 1 Ph*• Wheel Clamping Method: ....................................................... 4 Hydraulic Clamps• Bead Breaking System: ...............................................................Armor-Plate Disc• Max Rim Diameter: ............................................... 14” – 26” (356 mm - 660 mm)• Max Tire/Wheel Diameter: .............................................................63” (1600 mm)• Max Tire/Wheel Width: ............................................................. 31-1/2” (800 mm)• Shipping Weight: .....................................................................1485 lbs. (674 Kg)

*Different voltages available upon request. Specifications are subject to change without notice

Performance Driven Design

Simple Joy Stick Control


44


High Performance Tire Changer R-23STFeatures / Specs Features / Specs

High Performance Tire Changer R-26STFeatures / Specs Features / Specs

• Type of Drive System: ........................ Electric / Air• Motor: ...... 2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement: ............110-175 PSI / 8-12 BAR• Wheel Clamping Method: ...................4 Clamps - Internal / External• Table Clamping System: ........................ Dual Pneumatic Cylinders• Bead Breaking System: ............... Pneumatic Blade• Power-Assist Tower: ...............................Standard• Air-Lock Mounting Tool Holder: ................Standard• Inflation Gauge With Integrated Air Dump Valve: ......................Standard• Inflation Pressure Regulator/Limiter: ........Standard• Water Filter: ...........................................Standard• Oiler / Lubricator: ...................................Standard• Air Regulator: .........................................Standard• Breaker Bar: ..........................................Standard• Large Soap / Lubricator Bucket: ..............Standard• Brush: ...................................................Standard• Tilt-Back Tower: ..............Standard• Lower Bead Lift Roller: .............................Standard• Traveling Drop-Center Hold Down Device: ..........Standard• Inflation Restraint Device: ...........................Standard• Powerful “Jet-Blast” Bead Seating System: ......Standard• Tool Tray / Bin Storage: ............... 2

• Internal Clamping Capacity: 14-1/2” – 28” (368 mm - 711 mm)• External Clamping Capacity: 12-1/2” – 26” (317 mm - 660 mm)• Turntable Tire Width Capacity (Mounting): 5” – 22” (127 mm – 559 mm)• Bead Breaker Tire Width Capacity (Demounting): 3” – 15” (76 mm – 381 mm)• Maximum Tire Diameter: 47” (1194 mm)• Shipping Weight: 1025 lbs. (465 Kg)

• Type of Drive System ......................................Electric / Air• Motor ...................2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement ..........................110-175 PSI (8-12 BAR)• Wheel Clamping Method ...... 4 Clamps - Internal / External • Table Clamping System ...............Dual Pneumatic Cylinders • Bead Breaking System ....Pneumatic Blade • Tool Holder .................. Air-Lock Mounting • Inflation Gauge With Integrated Air Dump Valve ........... Standard • Inflation Pressure Regulator/Limiter ....................... Standard • Water Filter / Oiler / Lubricator / Air Regulator ............ Standard

• Breaker Bar ...................................................... Standard• Large Soap / Lubricator Bucket / Brush .............. Standard• Tower Design .................................................... Tilt-Back• Bead Lifting Roller(s) .....................................Single / Left• Traveling Drop-Center Hold Down Device ............ Standard• Inflation Restraint Device ................................... Standard• Powerful “Jet-Blast” Bead Seating System .......... Standard• Tool Tray / Bin Storage ....................................... Standard• Internal Clamping Capacity ..........................12” – 23” (305 mm - 584 mm)• External Clamping Capacity ..........................10” – 20” (254 mm - 508 mm)• Turntable Tire Width Capacity (Mounting) ........... 5” – 18” (127 mm – 457 mm)• Bead Breaker Tire Width Capacity (Demounting) ......... 3” – 16” (76 mm – 406 mm)• Maximum Tire Diameter ........................... 47” (1194 mm)• Shipping Weight ....................................935 lbs. (424 Kg)


Traveling DropCenter Helper



Tilt-Back Tower




55

RimGuard Clamp Tire Changer RX-950Features / Specs Features / Specs

• Type of Wheels ................. Aluminum, Special Alloys, Steel• Type of Drive System ....................................Electric & Air• Motor: ...................2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement .........................110-175 PSI (8-10 BAR)• Wheel Clamping Method ...... 4 Clamps - Internal / External• Table Clamping System Dual ............. Pneumatic Cylinders• Bead Breaking System .....Dual Positional Pneumatic Blade• Inflation Gauge .................................................. Standard• Water Filter ....................................................... Standard• Oiler / Lubricator ............................................... Standard• Air Regulator ..................................................... Standard• Breaker Bar ...................................................... Standard• Soap / Lubricator Bucket ................................... Standard• Brush ............................................................... Standard• Cross Cut Table Top ........................................... Standard• Powerful “Jet-Blast” Bead Seating System .......... Standard

• Internal Clamping Capacity ...................12-1/2” – 22” (317 mm – 559 mm)• External Clamping Capacity ...................11-1/2” – 21” (292 mm – 533 mm)• Bead Breaker Capacity ........ 3” – 14” (76 mm – 356 mm)• Tire Width Capacity / Table ......................... 14” (356 mm)• Maximum Tire Diameter ........................... 50” (1270 mm)• Shipping Weight ....................................642 lbs. (291 Kg)

Power-Assist RimGuard Clamp Tire Changer RX-950ATFeatures / Specs Features / Specs

• Type of Drive System .....................................Electric / Air• Motor: ...................2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement .........................110-175 PSI (8-12 BAR)• Wheel Clamping Method ...... 4 Clamps - Internal / External• Table Clamping System .............Dual Pneumatic Cylinders• Bead Breaking System ............................Pneumatic Blade• Power-Assist Tower: ........................................... Standard• Inflation Gauge With Integrated Air Dump Valve ... Standard• Inflation Pressure Regulator/ Limiter ................... Standard• Water Filter / Oiler / Lubricator / Air Regulator ..... Standard• Breaker Bar ...................................................... Standard• Large Soap / Lubricator Bucket / Brush .............. Standard• Bead Lifting Roller ............................................. Standard• Traveling Drop-Center Hold Down Device ............ Standard• Inflation Restraint Device ................................... Standard• Powerful “Jet-Blast” Bead Seating System .......... Standard• Tool Tray / Bin Storage ....................................... Standard• Internal Clamping Capacity ...................12-1/2” – 22” (317 mm – 559 mm)• External Clamping Capacity ...................11-1/2” – 21” (292 mm – 533 mm)

• Turntable Tire Width Capacity (Mounting) 3” – 14” (76 mm – 355 mm)• Bead Breaker Tire Width Capacity (Demounting) 3” – 14” (76 mm – 317 mm)• Maximum Tire Diameter 50” (1270 mm)• Shipping Weight 817 lbs. (371 Kg)

Tilt-Back Tire Changer R-23Features / Specs Features / Specs

• Type of Drive System ......................................Electric / Air• Motor ....................2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement ..........................110-175 PSI (8-12 BAR)• Wheel Clamping Method ....... 4 Clamps - Internal / External• Table Clamping System ..............Dual Pneumatic Cylinders• Bead Breaking System.............................Pneumatic Blade• Tool Holder ......................................... Air-Lock Mounting • Inflation Gauge w/Integrated Air Dump Valve ........ Standard• Inflation Pressure Regulator/Limiter ..................... Standard • Water Filter ...................... Standard • Oiler / Lubricator ............. Standard • Air Regulator ................... Standard • Breaker Bar ..................... Standard

• Large Soap / Lubricator Bucket / Brush ............... Standard• Tower Design ..................................................... Tilt-Back • Powerful “Jet-Blast” Bead Seating System ........... Standard• Tool Tray / Bin Storage ........................................ Standard• Internal Clamping Capacity ...........................12” – 23” (305 mm - 584 mm)• External Clamping Capacity ...........................10” – 20” (254 mm - 508 mm)• Turntable Tire Width Capacity (Mounting)........... 5” – 18” (127 mm – 457 mm)• Bead Breaker Tire Width Capacity (Demounting).......... 3” – 16” (76 mm – 406 mm)• Maximum Tire Diameter ............................ 47” (1194 mm)• Shipping Weight .....................................765 lbs. (347 Kg)Includes a FREE Wheel Protection Kit


X-Shape Tabletop Designallows operators to see the bottom bead area for quick inspection. Hardened alloy-steel wheel clamps feature “jet-blast” nozzles for quick inflation.RX950-B




RX950AT

R23


66

RimGuard Clamp RX-980E / RX-980AIndustrial Tire ChangerThe Ranger RX-980E and the RX-980A both feature the latest design and technology advancements to provide you with the best in-class value and performance. The RX-980A is a fully pneumatic version of our RX-980E and both are easy to operate and durable enough to withstand the every day abuses of a busy shop environment. Both models accommodate a wide variety wheels, including virtually all OEM configurations, select performance and alloy wheels. The motors and gear

boxes work systematically at a controlled speed for easy tire removal and installation. Ergonomic controls are sensibly placed to minimize excessive reaching, walking and bending, resulting in more jobs per day and increased profits. Large storage trays provide ample space for weights, tools and accessories.

Each model provides an expanded wheel clamping range to give you the ability to work efficiently on a variety of wheel styles and sizes. Our active multi-position RimGuard clamping system means expensive wheels are handled with greater care. The result is minimal to no damage and an incredible boost to efficiency. Internal and external clamping devices also feature an increased range for greater wheel handling capacity. The power-on-demand, geometric turntable provides high and low torque output for exceptional control and precision during every step of the mounting and dismounting process. Reversible direction gives the operator the ability to back up in the event of turntable stalling, and the geometric turntable provides for easier bead lubrication and visual inspection of the lower bead while servicing performance wheels and tires.

A multi-position, sculpted-blade bead breaker loosens even the most stubborn and awkward tire. The stainless steel cylinder bore maintains sealing efficiency and longevity for improved performance and constant power. The swing arm assembly features a spring-assisted, easy-to-adjust horizontal tool head with vertical height-adjustment locks.

Jet-blast bead seating nozzles provide a high-power burst of air to help seal beads during the inflation process. Integrated tire inflation system features air-surge pulse inflation for faster inflation speeds and improved bead seating. Comes equipped with a large, easy-to-read psi gauge, built-in pressure limiter and air-dump valve.


CHOOSE FROM A FULL-AIR OR

ELECTRIC / AIR DRIVE SYSTEM

Features / Specs RX980E RX980A Features / Specs RX980E RX980A

• Type of Drive System ..........................................Electric / Air ..................Full Air• Motor ........................ 2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz ..........Hi-Torque Air• 140-165 PSI (10-11 BAR) Air Requirement..........................X ...........................X• 4 Adjustable, Internal / External Wheel Clamps .....................X ...........................X• Single Pneumatic Cylinder Table Clamping System ...............X ...........................X• Dual Setting, Pneumatic Blade Bead Breaking System ..........X ...........................X• 8-Second Turntable Speed - 360-Degree Rotation ...............X ...........................X• Manual Lock Tool Holder .....................................................X ...........................X• Adjustable Turntable Clamps ...............................................X ...........................X• Inflation Gauge With Integrated Air Dump Valve ....................X ...........................X• Inflation Pressure Regulator/Limiter .....................................X ...........................X• Water Filter .......................................................................X ...........................X• Oiler / Lubricator ................................................................X ...........................X• Air Regulator ......................................................................X ...........................X

• Breaker Bar .......................................................................X ...........................X• Large Soap / Lubricator Bucket ...........................................X ...........................X• Brush ................................................................................X ...........................X• Rigid Fixed Tower Design ....................................................X ...........................X• Powerful “Jet-Blast” Bead Seating System ...........................X ...........................X• Air-Blast Surge Tire Inflation ................................................X ...........................X• Tool Tray / Bin Storage ........................................................X ...........................X• Internal Wheel Clamping Capacity .......... 7-3/4” – 25-1/4” / 197 mm – 641 mm• External Wheel Clamping Capacity .........5-3/4” – 23-1/4”” / 292 mm – 533 mm• Turntable Tire Width Capacity (Mounting) ............... 3” – 14” / 76 mm – 356 mm• Bead Breaker Tire Width Capacity (Demounting) ..... 3” – 16” / 76 mm – 406 mm• Maximum Tire Diameter ............................... 50” / 1270 mm ......50” / 1270 mm• Shipping Weight ....................................... 771 lbs. / 350 Kg ..768 lbs. / 348 Kg

Power-on-Demand Geometric Turntable

Powerful Bead Breaker

Powerful Inflation System & Controls



77

Wheel Balancer DST-1200

New, hood design allows coverage for a broader variety of tire shapes and sizes.

Pictured with RWL-350 Wheel Lift


• Motor .....1-1/2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Noise ....................................................... 70 decibels• Working Temperature ................. 5C / 27F to 50C / 82F• Drive System ............................................... Belt Drive• Cycle time ......................................6-9 seconds (avg.)• Balancing Modes Motorcycle / Dynamic / Static / 3-Alloy• Top Positioning Weight Locator ...................... Standard• Inside & Outside Measuring .......................... Standard• Millimeter / Inches Selection ......................... Standard• Self Calibration Function ............................... Standard• Wheel Offset Distance Setting .. Manual / Rolling Wheel

• Ounce / Gram Selection ................................ Standard• Auto Start When Hood is Lowered ................. Standard• Brake Type ................................Automatic / Electronic• Manual Brake Capability ............................... Standard• Centering Cones Included .........................................3• Two Piece Truck Cone Adapter Set .................. Optional• Wheel Calipers ............................................. Standard• Rear Cone Mount Spring ............................... Standard• Rear Cone Mount Pressure Cup .................... Standard• Quick-Release & Mount Hub Nut ................... Standard• No-Mar Ring For Quick-Release Hub Nut ....... Standard

• Maximum Tire Diameter ...................... 47” / 1194 mm• Max Tire Weight ............................145 pounds (65 Kg)• Max. Wheel Diameter ...10” - 24” / 254 mm - 610 mm• Wheel Width Capacity ......2” - 16” / 51 mm - 406 mm• Balancing Increments ................... 0.25 or 0.01 ounce• Average Balancing Speed .............................280 RPM• Accuracy ...............................................Within .01 Oz.• Resolution (Round Off Mode) .............0.01 ounce, 1.4°• Shipping Weight .........................562 pounds (255 Kg)

RimGuard Clamp Tire Changer R-710Features / Specs Features / Specs

• Type of Drive System .....................................Electric / Air• Motor: ...................2 Hp / 110 - 220 V / 1 Ph / 50 - 60 Hz• Air Requirement .........................110-175 PSI (8-12 BAR)• Wheel Clamping Method ...... 4 Clamps - Internal / External• Table Clamping System .............Dual Pneumatic Cylinders• Bead Breaking System ............................Pneumatic Blade• Tool Holder ..................................................Manual Lock• Inflation Gauge With Integrated Air Dump Valve ............... Standard / Pistol Type• Inflation Pressure Regulator/Limiter .................... Standard• Water Filter ...................................................... Standard• Oiler / Lubricator ............................................... Standard• Air Regulator .................................................... Standard• Breaker Bar ...................................................... Standard• Large Soap / Lubricator Bucket .......................... Standard• Brush ............................................................... Standard• Tower Design ................................................. Rigid Fixed• Tool Tray / Bin Storage ....................................... Standard• Adjustable Turntable Clamps .............................. Standard• Motorcycle Turntable Clamps .............................. Optional

• Internal Clamping Capacity ......................... 12” – 21” (304 mm – 533 mm)• External Clamping Capacity ..........................10” - 18” (254 mm – 457 mm)• Turntable Tire Width Capacity (Mounting) ........................ 5” – 12” (127 mm – 305 mm)• Bead Breaker Tire Width Capacity (Demounting) ...................... 3” – 11” (76 mm – 279 mm)• Maximum Tire Diameter ............................. 36” (914 mm)• Shipping Weight ....................................424 lbs. (192 Kg)


Complete Accessory Package

Simple FootPedal Controls

Touch-Sensitive Digital Controls

The new Ranger DST-1200 Dynamic Wheel Balancer is the result of over a decade of balancer technology experience and an unwavering dedication to precision, reliability and repeatability. This heavy-duty wheel balancer features a highly accurate sensor system that increases productivity and offers unprecedented speed and accuracy, especially when using sophisticated balance and weight placement techniques required for newer high-tech OEM and aftermarket wheels.

The DST-1200 adopts the latest 16-digit digital signal processor and single-chip technology. The single-chip circuit board architecture provides an inherent performance and reliability advantage compared to multi-chip implementations of the same functionality. In addition to overall latency reductions, the single-chip architecture significantly boosts device throughput. An extremely swift, dedicated hyper-transport protocol allows data to communicate with the micro-processor at much faster speeds. This solution offers unmatched integration of features and functionality, resulting in lower power consumption and dissipated heat.


88

Tire Changer & Balancer Options

StandardMount-Demount Head• May be used on Ranger® RimGuard Clamp changers• Requires standard end vertical shaft

Versa-ClampAdapters

Motorcycle / ATV Wheel Clamp Kit

• Set of four• Heavy steel construction• Quick-release, spring-loaded locking device keep clamps secured safely to table• Increases and decreases clamping capacity

Universal Wheel Clamp Kit comes with a shaft and adapters to accommodate Harley Davidson, Japanese, and European Motorcycles with hub assemblies up to 9-1/2” inches wide. It quickly installs on all Ranger® computer wheel balancers with a 36mm shaft. The adapter kit is designed to balance wheels with a center hole diameter from 5/8” – 1-1/4”. Kit incudes: • (1) Universal wheel clamp • (1) Measurement head extension • (1) Shaft • (4) Centering cones • (1) Short spacer • (1) Long spacer • (1) Spin-on nut

Quick-ChuckAdapter Kit• Converts standard vertical slide to quick-change• Allows quick change-over from standard to plastic mount-demount head(s)• Kit comes complete with all parts shown at left

WheelProtection Kit

• 3 each roller replacement inserts• 3 each mount-demount head underside slides• 4 turntable clamp covers• 2 bead breaker blade covers

Flange Adapter For Mount-Demount Head• For use with plastic mount-demount head• Converts existing mount-demount head mount to flange style

PlasticMount-Demount Head• Helps protect expensive alloy wheels from marring during installation and removal• Must have mount-demount head flange adapter

RWS-1TC Truck Cone Kit for BalancersThis 2-piece kit allows for large wheels with center holes from 4-1/2” -6-1/2”. Spacer ring is included to allow for larger offset wheel styles.

Tire Iron

• Cold forged steel• 16 double-compound-tip• Sold individually• May be used on changers

MotorcycleWheel AdaptersMotorcycle wheel adapters for use on tire changer models RX-850, RX-950 and R26EX feature heavy steel construction, plastic wheel grips to prevent damage to expensive wheels, anodized finish and quick-release, spring-loaded locking pins that keep clamps secured safely to table.• Set of four• Heavy steel construction• Plastic wheel grips prevent damage to expensive custom wheels• Anodized finish• Quick-release, spring-loaded locking pins keep clamps secured safely to table


99

Combination Drum / Rotor RL-8500Brake Lathe PackageThe ruggedly built RL-8500 is capable of faster, more accurate and easier resurfacing than any other brake lathe in its class. Infinitely adjustable feed rates allow you to easily modify cut speeds with the simple turn of a dial. Now you can reduce or increase the cut-time for best finish results, whether you’re speeding through an initial rough cut or a single-pass micro-finish. This complete lathe package includes lathe, a sturdy bench and large tool storage backboards, so you can hang all adapters within close reach.

The RL-8500 simply offers more—more features, more performance, more utility, more flexibility and more productivity than you’ve ever imagined. That’s what makes this one of the soundest investments for yourself and your business.

Quick Changefrom Rotors to

Drums


• Work Bench and Tool Storage Boards .........Standard• Deluxe Tool Package ..................................Standard• Quick-Change / Rotor to Drums .................Standard• Chip Funnel & Chip Bin ..............................Standard• Standard Arbor Size .............................................1”• Overall Height - Mounted On Bench: .62” / 1575 mm• Floor Space Needed - Width: ............49” / 1245 mm• Floor Space Requirements - Depth: ....36” / 914 mm• Spindle To Floor - Height Mounted On Bench: .................. 39-1/2” / 1003 mm

• Motor: .........115/230 VAC, 50/60 Hz, 1 Ph, 20 Amps• Spindle Travel: ...............................6-7/8” (175 mm)• Spindle Speed - Inner Groove: ................... 150 RPM• Spindle Speed - Outer Groove: .................. 200 RPM• Spindle Feed Speed Infinitely Variable ..........0 - .020” Per Rev. (0 - 0.55 mm/Rev)• Cross Feed Speed - Manual: ..........0 - .010” Per Rev. (0 - 0.25 mm/Rev)• Max. Brake Rotor Diameter ................17” / 432 mm.• Max. Brake Rotor Thickness ......... 2-1/2” / 63.5 mm.

• Brake Drum Dia. ...... 6” - 28” / 152 mm. - 711 mm.• Maximum Load - With Standard 1” Arbor .................. 150 Lbs. / 68 Kg.• Maximum Load - With 1-7/8” Truck Arbor ............... 250 Lbs. / 113 Kg.• Shipping Weight - With Bench & Standard Tools ........ 685 lbs. / 310 kg.

Fully-Equipped Tool PackageIncludes: Quick-Change Adapter Plus System, Backing Plates, large and

small cups with built-in springs, Dbl. Tapered Collet 1.322” x 1.670”, Double Tapered Collets, Centering Cone, Self-Aligning Spacers, Bell Clamp,

Step Adapter, Spring, Drum Silencer, Universal Silencer Band, Large Wrench, Large Rubber Silencer, Small Rubber Silencer, Small Wrench, Spanner Wrench, Arbor / Arbor Nut, Twin Cutter Assembly, Boring Bar Assembly

Optional Truck Adapter KitOur super-duty truck tooling package consists of an

upgraded 1-7/8” arbor and a wide variety of adapters. This enormous set allows you to expand coverage to handle virtually any vehicle, all the way through 1-ton

trucks. Upgrade your RL-8500 into a fantastically versatile truck servicing dynamo.

Dual, Fine-Tune,Micro-Dial CranksLarge Tool

StorageBackboard

The revolutionary RL-8500 uses independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically‐driven lathes. The absence of gear‐driven mechanical drives and variable‐speed transmission devices reduces service and repair costs dramatically over the unit’s lifetime. Vibration and chatter from gears, bearings and mechanical drive parts are eliminated—the same kind of vibration that is usually transferred to the tool-tip to leave irregular cuts in the machined finish.


1010

Bubble Balancer RWS-1BFeatures / Specs

• Rugged Die-Cast Aluminum Head Cone• Easy To Use Self-Leveling Stand. No Need For Leveling Legs• Built-In Weight-Storage Compartments• Self-Aligning, Spring-Loaded Cone• Plated Steel Guide Rods With Zinc Support Springs• Hardened Cast Pivot Seat• Cast Aluminum Base• Recessed Circular Level Bubble• 6061 Extruded Aluminum ASTM B 221 Shaft• Hardened Pivot Pin for Long Wear• Hub Hole Diameter: 1.5” - 4.5” (39 - 114.3mm)• Bubble Sensitivity: .788 Sec. Per 2mm• Overall Dims: 22” (559mm) x 12” (305mm)• Overall Weight: 14 Lbs. (6.35 Kg)• Calibrated @ 90-Degree, 180-Degree, 270-Degree and 360-Degree• Overall Height: 23” (584 mm)• Base Diameter: 12” (305 mm)• Shipping Weight: 15 Lbs. (7 Kg)

Pneumatic Wheel Lift RWL-350Features / Specs

The RWL-350 Wheel Lift makes light work out of heavy lifting by servicing large, oversize truck and custom wheels that usually require extra effort on part of the technician. The optional RWL-350pneumatic wheel lift helps technicians mount wheels effortlessly on most balancers, preventing potential injuries and fatigue from manually lifting heavy wheels. The lever-controlled wheel lift quickly raises the wheel and a bearing mounted slider positions them for easy mounting.• Pneumatic operation• 350-lb. (159 Kg) working load capacity• Heavy duty steel casters• 14 gauge construction• Weight 165 lbs. (75 Kg)

On-Car Brake Lathe Package RL-18CFeatures / Specs Features / Specs

• Provides a consistently superior on-the-car rotor finish• Attaches easily to the caliper• Simultaneously machines both sides of the rotor parallel eliminating run-out problems• Rigid mounting and precision tool-holders eliminates flexing for maximum accuracy• Specially designed adapters assure that rotors are machined to manufacturer’s specifications• Comes standard with power-drive system that eliminates the need to rely on the car’s engine to turn the rotor• Variable speed power-drive turns spindle at fast or slow speeds for better finish cuts• The power-drive system allows for the ultimate surface finish for on-the-car machining by maintaining proper turning speed

• Sturdy cast iron construction• Patented yoke attaches to a single lug bolt & automatically centers itself• Patented coupling of the drive unit can be easily aligned with the yoke in preparation for machining• Simple, user-friendly controls• Heavy-duty, fully adjustable power-drive stand• Storage space and blow-molded plastic carrying case for tools and accessories• Emergency stop switch• Heavy duty locking caster allows for fast and stable positioning of power drive assembly• Max Rotor Thickness: 1-5/8” (41 mm)• Max Rotor Diameter: 13-1/2” (343 mm)• Shipping Weight: 125 lbs. (57 Kg)• Drive Unit; Motor: 0.5 HP / 110-220V / 1 Ph. / 50-60 HZ.

Simple Set Up


Pictured with DST-1200 Balancer


1111

Mini Tire Changer RWS-2TCFeatures / Specs

• A must for tire shops • Rubber grip handles • Efficient operation at a fraction of the cost • Designed for ATV and other small diameter tires • Perfect for home or shop use • Performs both mounting and bead breaking operations

• Heavy steel construction for maximum durability • Portable and easy to use • Handles tires from 4” to 12” • Shipping weight: 18 lbs. (8 Kg)

Manual Tire Changer RWS-3TCFeatures / Specs

• A must for tire shops • Rubber grip handles • Efficient operation at a fraction of the cost • Perfect for home or shop use • Performs both mounting and bead breaking operations • Heavy steel construction for maximum durability • Portable and easy to use • 7-1/2” diameter wheel rest plate • 15” x 18” base (381 mm x 457 mm) • Handles tires from 8” to light truck (7-1/2” x 16”) • Shipping weight: 32 lbs. (15 Kg)

Height Adjustable Tire Spreader TS-150Features / Specs

• Air-powered operation • Designed to service automobile tires and commercial truck tires • Perfect for tire inspection, buffing, cutting, dust suction, inserting tubes and patching• Quickly lifts tires to a convenient work height• Heavy-duty rollers permit tires to rotate freely• Adjustable spreader forks accommodate both narrow- or wide-tread widths• Heavy steel construction• Wide-base design for stability• Max working pressure range: 125 psi – 175 psi• Shipping weight: 600 lbs. / 272 kg


1212

Shop Equipment

RV-80L Heavy-Duty Tire VulcanizerFeatures / Specs

• Repairs tire tread, shoulder or sidewall • Large-capacity, 90º rotating C-frame accommodates different wheel sizes and allows for vertical or horizontal repairs• An adjustable, swing-open, rotating C-frame cavity simplifies tire loading and unloading• Adjustable height tower• Contoured heat pad conforms to a variety of tire profiles • Applies over 5,000-lbs. of pressure with heat for maximum adhesion of patch to casing • Energy and cost efficient for lower operating costs • Lightweight self-standing design offers portability and maximum stability• Handles long sidewall repairs• Cures both patch and plug at the same time• Constant controlled heating elements maintain optimum temperature• Dimensions: 57” x 22” x 14” / 1,448 mm x 559 mm x 356 mm• Power requirement: 110 V / 60 Hz / 1 Ph• Shipping weight: 78 lbs. / 35 kg

RV-80H• Power requirement: 220 V / 50 - 60 Hz / 1 Ph

Pneumatic Mobile RWS-150WL Wheel Lift Features / Specs

• Lightweight self-standing design offers portability and maximum stability.• Dual parking brakes ensure the lift remains stable and will not move when in use.• Enclosed lifting carriage and cylinder protect it from dirt and other debris.• The base plate frame is dropped over the wheel assemblies to provide a lower center of gravity to reduce tipping.• All caster wheels rotate a full 360º for greater maneuverability and easier movement.• Simple one hand operation for raising and lowering the lift.• Offset column gives access to lug nuts and allows unobstructed viewing of work area.• Features air regulator, water filter and lubricator for maintenance free pneumatic operation.• Welded steel construction.• Powder coat finish.• Lifting capacity: 150 lbs. / 68 kg.• Lifting height / Top of Rollers: 36” / 915 mm.• Dimensions: 75” x 33” x 27”• Air Requirement – 90 - 150 PSI, 10 - 25 CFM

Tire Test Tank With Built-In Wheel Lift RWS-55TDFeatures / Specs

• Handles tires up to 68” in diameter, including passenger and light truck tires, super-wide tires, bus tires, coach tires, and commercial truck tires• Allows operators to locate sidewall and tread leaks with minimal effort• A convenient foot operated wheel lift that saves time and reduces injury• Lifts heavy tires in and out of the tank for increased speed and efficiency• 500-lb. capacity tire handler lifts and pivots easily by hand, then completely submerges the entire wheel assembly into the deep tank, allowing dual-side inspection• Includes integrated air-source lubricator, water extractor and pressure regulator• Heavy-duty all steel construction• Built-in drain • Powder coated finish• Overall Height: 75” / 1,900 mm• Overall Width: 59” / 1,500 mm• Overall Depth: 63” / 1,600 mm• Shipping weight: 1,100 lbs. / 499 kg


1313


8-CCD 4-Wheel CRT-380RWireless Alignment System

The Ranger CRT-380R Alignment System is a highly accurate, 4-wheel, wireless alignment system for domestic and imported cars and trucks. Designed for simplicity and speed, this essential system features 8-CCD technology, Bluetooth® data transfer and our refined ProSpec Alignment software.

ProSpec software was designed to give your wheel alignment service the best possible efficiency. With it, you can now select the most effective measuring routines before even starting wheel alignment procedures. Standard programming options include software-guided routines with initial and final measurements; rapid procedures for measurements without caster steering angle and / or runout compensation or “free” measurement for verifying individual values as required.

All alignment steps from start-to-finish are clearly shown with vibrant animation and graphics to provide a faster, more profitable and easier to understand alignment procedure. This unique combination of easy, user-friendly functionality and technological sophistication enables any business owner to provide superior alignment service with minimal investment and training. The ProSpec software includes the essential tools for performing fast, accurate alignments with factory results. It’s easy to use, consistent, precisely measurable and requires almost no supervision. Technicians proceed easily and receive immediate feedback and correction. Simplistic read results also enable you to identify potential problem areas specifically related to suspension components.

• Rolling cabinet with integrated storage ........ Standard• Steering Wheel Lock ................................... Standard• Brake Pedal Depressor ............................... Standard• Current year domestic and foreign car vehicle specifications ............................ Standard• Dimensions Width: .............................................40” (1016 mm) Depth: ................................................27” (686 mm) Height:..............................................50” (1270 mm)

• Sensor Calibration Fixture ............................ Optional• Keyboard ................................................... Standard• Computer ......... 1,2Dell® OptiPlex 360, Dual 2.50 GHz • Operating System ......................Windows® Vista SP1• Hard Drive .............................................80 GB SATA• Video Card ................................................. Standard• Monitor: Dell E170S FP 17” LCD .............. 1,2 Standard 19” ............................................................ Optional 22” ............................................................ Optional

• Printer: Dell® V105 Color ......................... 1,2 Standard• 8-Port USB with Cable ................................ Standard• Mouse .............................................. 2-Button Scroll• Mouse Pad ................................................ Standard• Shipping Weight .............................455 lbs. (206 Kg) • Power Requirements 115V/1Ph, 50/60 Hz/8 amp - 230V/1Ph, 50/60 Hz/8 amp(1) Comparable unit will be supplied if unavailable at time of purchase(2) All supported by round-the clock Dell Technical Support

Compatible With Ground-Effects• Spoiler setting adjustments accommodate for blocked front or rear line-of-sight• Includes extended 4-point clamping tips with thin profiles that fit a variety of custom wheel profiles

Steering Wheel Lock &Brake Pedal Depressor

26” Capacity Wheel Clamps• Aluminum alloy construction• Heavy duty chrome rods with nickel-plated screws


1414

RS-750 Truck Spray Wash Cabinet Features / Specs

If your service garage handles a lot of larger vehicles, then this extra large capacity spray wash cabinet was designed just for you and your customers. With an inside compartment height of 54”, it can handle anything from engine parts to tractor parts. Each RS-750 is equipped with a large, 30” diameter turntable that can carry a payload up to 1,000 lbs. Like all Ranger® spray-wash cabinets, the RS-750 is built to last. We constructed this cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and polyurethane finish. Durable construction combined with simple operating controls, stainless-steel nozzles, a gasket-free door and a large, 70-gpm pump make the RS-750 tough enough to take on the heaviest, dirtiest auto parts you can find.

• Overall Height .................78” (1981 mm)• Inside Height ...................54” (1372 mm)• Inside Width ......................32” (813 mm)• Turntable Diameter ............30” (762 mm)• Recommended Floor Space ............44” x 43” (1118 mm) x 108 mm)• Load Capacity ............1000 lbs. (454 Kg)• Cycle Timer ....................... 0-60 minutes• Stainless-Steel Nozzles ...................... 22• Cabinet / Door Construction ..........Steel / 12 Gauge / .109 Thickness• Pump Output ...............70psi @ 70 GPM• Motor: ..... 2-HP / 220 Volt AC / 60 Hz / 1 Phase• Electric Heater ...................... 6 Kilowatts

• Water Temperature ...........135° - 175° F• Large Drain Pipe ..................... Standard• Heavy-Duty Rubber Casters ...... Standard• Tank Capacity ........................53 Gallons• Removable Tank Screen ............ Standard• Stainless Oil Skimmer ............... Standard• Friction-Drive Turntable System . Standard• Full Opening Octagonal Door ..... Standard• Gasket-Free Door ..................... Standard• Small Parts Basket ................... Standard• Steam Vent ............................... Optional• Stainless-Steel Handles ............ Standard• Removable Parts Tree ............... Standard• 25 pounds Detergent................ Standard• Shipping Weight ...........960 lbs. (435 Kg)

Professional Spray Wash Cabinet RS-500Features / Specs

This powerfully versatile, 50-gallon capacity spray wash cabinet degreases even your filthiest transmissions in no time flat. By using an octagonal full-opening door, we’ve increased access to the turntable to enhance the operator’s loading capabilities. Simple operating controls, stainless-steel nozzles, a gasket-free door and a large 70-gpm pump demonstrates Ranger’s commitment to enhanced performance and productivity without a single sacrifice in quality. Like all Ranger spray-wash cabinets, the RS-500 is built to last. The cabinet and door are heavy-duty 12-gauge steel and coated with an industrial two-step primer and polyurethane finish.

• Overall Height .................. 66” (1676 mm)• Inside Height ................... 43” / 1092 mm)• Inside Width ....................... 32” (813 mm)• Turntable Diameter ............. 30” (762 mm)• Recommended Floor Space ............ 44” x 43” (1118 mm x 1092 mm)• Load Capacity ................500 lbs. (227 Kg)• Cycle Timer ......................... 0-60 minutes• Stainless-Steel Nozzles ........................ 18• Cabinet / Door Construction: ............Steel / 12 Gauge / .109 Thickness• Pump Output ................ 75 psi @ 70 gpm• Motor: 1-HP / 220 Volt AC / 60 Hz / 1 Phase• Electric Heater ........................ 6 Kilowatts• Water Temperature .............135° - 175° F• Large Drain Pipe ........................ Standard• Heavy-Duty Rubber Casters ........ Standard

• Tank Capacity: 50 Gallons• Removable Tank Screen: Standard• Stainless Oil Skimmer: Standard• Friction-Drive Turntable System: Standard• Full Opening Octagonal Door: Standard• Gasket-Free Door• Small Parts Basket• Optional Steam Vent• Stainless-Steel Handles• Removable Parts Tree• 25 pounds Detergent• Shipping Weight 740 lbs. (336 Kg)

Shop Equipment


1515

Standard Accessory PackageAll models come standard with a removable parts rack, small parts basket and 25-lbs.

of detergent.

Alloy NozzlesAlloy nozzles are used instead of drilled holes, providing a high-pressure spray pattern and

corrosion-free performance.

Heavy-Duty TurntableA friction-drive system for the turntable

eliminates potential damage caused to the motor in the event parts are jammed or

caught inside the cabinet.

Automatic Timer & Safety Door SwitchA built-in safety door switch shuts off the wash

cycle when the door is opened. A variable 60-minute timer lets you automatically set

different wash cycle times.

Parts Basket with Removable Tree RackThe hanging parts basket is perfect for cleaning smaller parts. Position it above the larger parts

when they are placed on the turntable. The center tree rack can be easily removed to provide

additional clearance.

Quick-Release Door LatchA quick-release door latch is employed for operator convenience and the gasket-free door keeps solution in the tank instead of

on your floor.

Tank Drain / Heavy-Duty CastersA built-in drain is included to remove sludge

from the bottom of the tank. Heavy-duty, rubber, swivel casters provide easy mobility.

Multi-Directional Spray JetsMulti-direction spray jets positioned above, below and on the side to strip the toughest

grease and grime.

Built-In Oil Skimming SystemA stainless-steel oil skimming disc magically

“lifts” the oil and grime from the water keeping your detergent solution cleaner and longer lasting. A downspout directs the oil

into holding containers.

Spray Wash Cabinet FeaturesHeated Aqueous Base Cleaning • No Harmful Solvents • Helps Protect the Environment • Saves Time & Money


1616

Jacks & Lifting Equipment

1-1/2 Ton Aluminum Racing Jack RFJ-3000AL Features / Specs

• Lightweight for easy portability• Aircraft grade billet aluminum design• Low profile single piece front roller• Oversized knurled aluminum handle• Fast 3-pump operation gets cars up quick• Dual-plunger pump assembly• Reaches full lifting height with just 4 pumps• Roller-cam plungers and u-joint release• Alloy-plated ram• Double-sealed hydraulics for longer service life• Safety-overload system• Lifting Capacity: 3,000 lbs. (1361 Kg)• Front Lowered Height: 3-1/2” (89 mm)• Raised Height: 17-3/4” (451 mm)• Overall Width: 11-3/4” (298 mm)• Chassis Length: 24” (610 mm)• Shipping Weight: 39 lbs. (18 Kg)

3-Ton Super-Duty Floor Jack RFJ-3TFeatures / Specs

• Alloy-plated ram• Swivel casters for easy mobility• Professional model designed for heavy use• Universal-joint release system• Roller-cam plunger assembly• Heavy steel construction for maximum durability• Double-sealed hydraulics for longer service life• Sealed hydraulic unit prevents contamination

• Safety overload system• Flanged side plates for increased strength• Lifting Capacity: 6,000 lbs. (2722 Kg)• Lowered Height: 4-3/4” (121 mm)• Raised Height: 20-1/2” (521 mm)• Front Overall Width: 11” (279 mm)• Rear Overall Width: 14-1/2” (368 mm)• Chassis Length: 28” (711 mm)• Shipping Weight: 110 lbs. (50 Kg)

2-1/4 Ton Pro Series Floor Jack RFJ-214TFeatures / Specs

• Alloy-plated ram• Welded lift arm assembly• Heavy gauge steel construction• Swivel casters for easy mobility• Professional model designed for heavy use• Heavy steel construction for maximum durability• Sealed hydraulics prevents contamination• Built-in safety overload valve• Lifting Capacity: 4,500 lbs. (2041 Kg)• Lowered Height: 5” (127 mm)• Raised Height: ................................................19-1/4” (489 mm)• Front Overall Width: ........................................ 10-3/4”(273 mm)• Rear Overall Width: .........................................13-1/2” (343 mm)• Chassis Length: ................................................... 26” (660 mm)• Shipping Weight: ................................................. 84 lbs. (38 Kg)

2-Ton Long-Reach Low-Pro Jack RFJ-2TXFeatures / Specs

• Alloy-plated ram• Welded lift arm assembly• Heavy gauge steel construction• Swivel casters for easy mobility• Professional model designed for heavy use• Heavy steel construction for maximum durability• Sealed hydraulics prevents contamination• Built-in safety overload valve

• Features quick-lift pedal for fast lifting• Simple and safe to operate• Ergonomically designed handle• Ultra-low pad height• Lifting Capacity: 4,000 Lbs. (1814 Kg)• Lowered Pad Height: 3-1/2” (89 mm)• Raised Height: 31-1/2” (800 mm)• Front Overall Width: 11”” (279 mm)• Rear Overall Width: 19” (483 mm)• Chassis Length: 37” (940 mm)• Shipping Weight:: 117 Lbs. (53 Kg)

Roller Cam Plunger Assembly

Universal-Joint Release System

3-Ton Professional Series Floor Jack RFJ-3TPFeatures / Specs

• Alloy-plated ram• Welded lift arm assembly• Heavy gauge steel construction• Swivel casters for easy mobility• Professional model designed for heavy use• Heavy steel construction for maximum durability• Built-in safety overload valve• Sealed hydraulics prevents contamination• Lifting Capacity: 6,000 lbs. (2722 Kg)• Lowered Height: 5-1/4” (133 mm)• Raised Height: 19-1/4” (489 mm)• Front Overall Width: 10-3/4” (273 mm)

• Rear Overall Width: 13-1/2” (343 mm)• Chassis Length: 26” (660 mm)• Shipping Weight: 88 lbs. (40 Kg)


1717

3 Ton Heavy-Duty Floor Jack RFJ-6HDFeatures / Specs

• Low-profile chassis accommodates low ground-clearance vehicles• Swivel casters for easy mobility• “Quick-Pump” feature for faster lifting speed• Professional model designed for heavy use• Universal-joint, pressure release system• Roller-cam, dual plunger pump assembly• Heavy steel construction for maximum durability• Double-sealed hydraulics for longer service life• Sealed hydraulic unit prevents contamination• Safety overload system. • Flanged side plates for increased strength

• Lifting Capacity: 6,000 lbs. / 2721 Kg.• Lowered Height: 3-5/8” / 90 mm.• Raised Height: 21” / 533 mm.• Front Overall Width: 11” / 279 mm.• Rear Overall Width: 14” / 356 mm.• Chassis Length: 27” / 686 mm.• Shipping Weight: 108 lbs. / 50 Kg.

Floor Jack Cross Beam RST-2TCBFeatures / Specs

• Provides additional stability• Saddles adjust from 23” to 32” on center• Fits most standard floor jacks• Threaded pad design provides an additional 2” adjustment• Rubber lift pads for better stability

3-Ton Speedy Jack RFJ-3TQPFeatures / Specs

• Alloy-plated ram • Exclusive “Quick-Pump” feature lifts saddle to chassis in one easy pump• Welded lift arm assembly• Heavy gauge steel construction• Swivel casters for easy mobility• Professional model designed for heavy use• Heavy steel construction for maximum durability

• Sealed hydraulics prevents contamination• Built-in safety overload valve• Lifting Capacity .......6,000 lbs. (2722 Kg)• Lowered Height ...................5” (127 mm)• Raised Height ............ 19-3/4” (502 mm)• Front Overall Width ............11” (279 mm)• Rear Overall Width ...... 13-1/2” (343 mm)• Chassis Length .......... 25-1/2” (648 mm)• Shipping Weight ...............90 lbs. (41 Kg)

• Lifts FWD vehicles without axle beam• Use to lift cars at rocker panels for simultaneous wheel service• Heavy steel construction for maximum durability • Lifting capacity: 4,500 lbs. (2041 Kg)• Shipping weight: 29 lbs. (13 Kg)

10-Ton Long-Frame RFJ-1OTL Floor JackFeatures / Specs

• Alloy-plated ram• Swivel casters for easy mobility• Designed for heavy use• Safety-overload system• Pump handle can be locked in three different towing positions• Additional foot pedal control provides quick set-up and rise• Heavy steel construction for maximum durability• Sealed hydraulic unit prevents contamination

• Double-sealed hydraulics for longer service life• Lifting Capacity: 20,000 lbs. (9072 Kg)• Lowered Height: 7” (178 mm)• Raised Height: 23” (584 mm)• Front Overall Width: 13” (330 mm)• Rear Overall Width: 18” (457 mm)• Chassis Length: 61” (1549 mm)• Shipping Weight: 479 lbs. (217 Kg)

• Long-reach chassis.• Low-profile design accommodates low ground-clearance vehicles.• Swivel casters for easy mobility.• Professional model designed for heavy use.• Direct-drive pump operation for precise control.• Heavy steel construction for maximum durability.• Double-sealed hydraulics for longer service life.• Sealed hydraulic unit prevents contamination.• Safety‐overload system.• Flanged side plates for increased

strength.• Lifting capacity: 3,000 lbs. / 1,361 kg• Lowered height: 2‐3/4” / 70 mm• Raised height: 24” / 610 mm• Front overall width: 11” / 279 mm• Rear overall width: 14‐1/2” / 368 mm• Chassis length: 34” / 864 mm• Shipping weight: 112 lbs. / 51kg

1-1/2 Ton Low Rider RFJ-3000LPF Super-Long Floor JackFeatures / Specs


1818


The Original 1-Ton Telescoping “TransJak” RTJ-1Features / Specs

The original and still the best, TransJak’s heavy lifting capabilities and top-notch construction make it the transmission service professional’s first choice. Remove, transfer and install transmissions, transaxles and other drive-train components with ease. The fully-adjustable saddle adapts to just about any passenger car and light truck transmission or assembly. Plus, with its heavy-duty chain anchors and fail-safe overload system, you can feel secure—even with all that metal up in the air. It’s just one of the reasons why The TransJak® is America’s most popular transmission jack.

Features / Specs Features / Specs

• Foot operated pump• Alloy-plated ram• Two-stage design• Extra wide base• Safety overload system• Fully adjustable saddle tilts four ways• Heavy-duty steel swivel casters• Two, push/pull handles• Heavy-duty chain anchors• Heavy steel construction for maximum durability• Sealed hydraulic unit prevents contamination

• Double-sealed hydraulics for longer service life• Capacity First Stage: 2000 lbs. (907 Kg)• Capacity Second Stage: 1000 lbs. (454 Kg)• Lowered Height: 37” (940 mm)• Raised Height: 79-1/2” (2019 mm)• Base Dimensions: 39” x 39” (991 mm x 991 mm)• Shipping Weight: 214 lbs. (97 Kg)

Heavy-duty chain anchors keep loads secure

Steel roller bearings are included underneath the table and on the ends of the adjustment screw to minimize friction and allow for effortless table adjustment even when loaded

Fully adjustable universal saddle adapts to passenger car and light truck automatic transmissions and transaxle assemblies

Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch

Two-stage design provides an extended lifting height of over 79”

Hardened chrome-moly ram prohibits rust from entering hydraulic system

Two individual pull handles for extra handling capability

System overload system prevents the jack from being used beyond its rated capacity.

Extra-wide base and four heavy-duty swivel bell bearing casters provides a low center of gravity and exceptional maneuverability

Foot operated pump and release leaves operator’s hands free


1919

RTJ-3000 1-1/2 Ton Telescoping Transmission Jack Features / Specs Features / Specs Features / Specs

• Double-sealed hydraulics for longer service life• Fully adjustable saddle tilts four ways• Heavy-duty steel swivel casters• Heavy-duty chain anchors• Two-stage design• Extra wide base• Safety overload system• Heavy-duty chain anchors keep loads secure• Steel roller bearings are included underneath the table and on the ends of the adjustment screw to minimize friction and allow for effortless table adjustment even when loaded • Fully adjustable universal saddle adapts to passenger car and light truck automatic transmissions and transaxle assemblies

• Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch• System overload system prevents the jack from being used beyond its rated capacity• Extra-wide base and four heavy-duty swivel ball bearing casters provides a low center of gravity and exceptional maneuverability• Capacity First Stage: 3000 lbs. (1361 Kg)• Capacity Second Stage: 2000 lbs. (907 Kg)• Lowered Height: 37” (940 mm)• Raised Height: 79-1/2” (2019 mm)• Base Dimensions: 45” x 45” (1143 mm x 1143 mm)• Shipping Weight: 232 lbs. (105 Kg)

660-lb. Capacity Transmission Jack RTJ-660Features / Specs

• Hand operated pump• Hand control release valve• Alloy-plated single-stage ram• Heavy steel construction for maximum durability • Heavy-duty steel swivel casters• Heavy-duty chain anchors• Sealed hydraulics prevents contamination• Extra wide base with swivel casters• Built-in safety overload valve• Lifting Capacity: 660 lbs. (299 Kg)• Lowered Height: 51” (1295 mm)• Raised Height: 73” (1854 mm)• Base Dimensions: 30” x 30” (762 mm x 762 mm)• Shipping Weight: 92 lbs. (42 Kg)

1/2-Ton Capacity RTJ-1100 Transmission Jack Features / Specs

• Foot operated pump• Hand control release valve• Alloy-plated single stage ram• Heavy steel construction for maximum durability• Heavy-duty steel swivel casters• Heavy-duty chain anchors• Sealed hydraulics prevents contamination• Extra wide base with swivel casters• Built-in safety overload valve• Lifting Capacity: 1100 lbs. (499 Kg)• Lowered Height: 45”(1143 mm)• Raised Height: 72” (1829 mm)• Base Dimensions: 24” x 24” (610 mm x 610 mm)• Shipping Weight: 115 lbs. (52 Kg)

• Foot operated pump• Alloy-plated ram• Heavy steel construction for maximum durability• Sealed hydraulic unit prevents contamination

25-Ton Air Bottle Jack RBJ-25TLFeatures / Specs

• Designed for heavy commercial use• Air-hydraulic operation• Lowered profile for low ground-clearance vehicles• Hardened alloy-plated telescoping ram for maximum durability.• Heavy-duty steel saddle• Large rubber wheels for easy maneuverability

• Compact design fits easily between tandem wheels.• Dead-man controls for safe operation• Long “T” handle for easy positioning• “T” handle can be locked in three different positions• Double-sealed for longer service life• Air valve with integrated filter

• Heavy-duty air motor provides maximum power• Sealed hydraulic unit prevents contamination• Built-in safety valve prevents jack from being used beyond its rated capacity• Additional lifting saddles included• Lifting Capacity / First Stage: 55,000 lbs. (24,948 Kg)• Lifting Capacity / Second Stage: 20,000 lbs. (9072 Kg)

• Lowered Height: 7-1/8” (181 mm)• Maximum Lifting Height: 14-3/4” (375 mm)• Chassis Width: 6-3/4” (171 mm)

• Chassis Length: 30” (762 mm)• Shipping Weight: 154 lbs. (70 Kg)


2020


Motorcycle / ATV Lift RML-600Features / Specs Features / Specs

• Full Travel Automatic Safety Locks• Heavy 12-Gauge Steel Construction• Single Pneumatic Lifting Cylinder• Durable Powder Coat Finish• Retracting Rear Wheel Deck• Includes: (1) Lift Unit (1) Standard Approach Ramp (1) Dual Crank Front Wheel Vise (1) Pump Unit • Lifting Capacity: 1000 lbs. (454 Kg)• Lowered Height: 7-3/4” (197 mm)• Platform Raised Height: 30-1/2” (775 mm)

Motorcycle / ATV Lift RML-800Features / Specs

• Perfect for servicing motorcycles and ATV’s• Works on the ground or can be used with platform lifts• Low-profile design fits under custom frames• Includes two adjustable saddle adapters• Lifting Capacity: 800 lbs. (363 Kg)• Lowered Height: 3-1/2” (89 mm)• Raised Height: 16-1/2” (419 mm)• Top Dimensions: 6” x 17-3/4” (152 mm x 451 mm)• Shipping Weight: 33 lbs. (15 Kg)

Motorcycle / ATV Lift RML-750HDFeatures / Specs Features / Specs

• Built-in retractable swivel casters allow mobility under load• Reversible bolt-on side extensions can be also used as parts trays• Dual functioning, air or hydraulic, pump operated power unit• Approach ramp extension for loading low clearance bikes• Full travel automatic safety locks• Heavy 12-gauge steel construction• Single hydraulic lifting cylinder• Durable powder coat finish• Retracting rear wheel deck• Lifting Capacity: 1650 lbs. (748 Kg)• Lowered Height: 7” (178 mm)• Platform Raised Height: 43” (1092 mm)• Includes: (1) Lift Unit (2) 11” Bolt-On Side Extensions (1) Front Wheel Vise (1) Pump Unit (2) Drive-Up Ramps with (1) Ramp Extension (2) Rear Support Poles

• Length – Main Lifting Table: 80-1/2” (2045 mm)• Length – With Side Extensions: 88-1/2” (2248 mm)• Width – Main Lifting Table: 29-1/2” (749 mm)• Width – With Side Extensions: 53” (1346 mm)• Shipping Weight: 638 lbs. (289 Kg)

RML-800 can be combined with either the RML-750HD or the RML-600

Rear support poles come

standard

Encased Casters

Rear Wheel Free System

• Length – Main Lifting Table: 85” (2159 mm)• Length – With Front Table Extension Installed: 98” (2489 mm)• Width – Main Lifting Table: 28” (711 mm)• Width – With Side Extensions Installed: 47” (1194 mm)• Shipping Weight: 545 lbs. (247 Kg) Shown With 12” Side extensions Installed Ideal for four wheel ATV’s or added work space. Expands table width from 28” to 52”. Ramps included. Shown With Front extension Installed

Lift Package Includes:• Lift Platform• Side Extensions• Front Table Extension


2121

Fluid Service / Hose ReelsPortable Oil Drain RD-15Features / Specs

• Wide-body design eliminates tipping, assuring proper balance• Removable steel mesh cover keeps debris out• Built in baffles and splash guards prevents spillage• 15-gallon capacity• Heavy-duty steel construction with a low-profile design• Ideal for truck and RV service

• Swivel casters give mobility and T-handle offers easy positioning• Built-in drain nozzle• Overall Height: 8-1/2” (216 mm)• Shipping Weight: 58 Lbs. (26 Kg)

18-Gallon Rolling Oil Drain With Pump RD-18GFeatures / Specs

• Lightweight for easy portability• Comes standard with oil drain pump• Safe and easy to use• Wide body design• Tough construction will resist dents, rust and corrosion• Heavy-duty stainless steel clamp• Non-corrosive telescoping tube

• Rugged 18” funnel with built in contamination screen• 18-gallon fluid capacity• Adjustable height from 48” to 72”• Easy pour oil spout for simple evacuation• Built in hand grips• Four swivel ball bearing casters• Translucent polyethylene tank for easy viewing of fluid level

8-Gallon Rolling Oil Drain RD-8GFeatures / Specs

• Lightweight for easy portability• Safe and easy to use• Wide body design• Tough construction will resist dents, rust and corrosion• Heavy-duty stainless steel clamp• Non-corrosive telescoping tube• Rugged 18” funnel with built in contamination screen

• 8-gallon fluid capacity• Adjustable height from 45” to 66”• Easy pour oil spout for simple evacuation• Built in hand grips• Four swivel ball bearing casters• Translucent polyethylene tank for easy viewing of fluid level• Shipping Weight: 17 lbs. (8 Kg)

Spring Rewind Hose Reel RH-50SLFeatures / Specs

• Wall, floor, or ceiling mount• Use for air or water• 7” x 6” Reinforced L-Shaped Base• Powder coated• Multi-position release ratchet• Nine position adjustable guide arm• Four direction rollers• Anti lock-out ratchet• Solid brass swivel fitting• 50’ / 300 PSI hose included• 3/8” fittings• Shipping Weight: 50 lbs. (23 Kg)

RH-33SL• 33’ / 300 PSI hose included• 3/8” fittings• Shipping Weight: 50 lbs. (23 Kg)

Spring Rewind Hose Reel RH-50PLFeatures / Specs

• Wall, floor, or ceiling mount• Use for air or water• 7” x 8” reinforced mounting base• Dual support reinforced leg base• Dual support guide arm• Dual support 1-3/8” axle• Fully enclosed multi-position release ratchet• Powder coated for corrosion free performance• Nine position adjustable guide arm• Four direction, non snag rollers• Anti lock-out ratchet mechanism prevents reel from locking up when hose is fully extended• Solid brass swivel fitting• 50’ / 300 PSI hose included• 3/8” fittings• Shipping Weight: 55 lbs. (25 Kg)

Spring Rewind Hose Reel RH-50PMFeatures / Specs

• Wall, floor, or ceiling mount• Use for air, water, oil or grease• 7” x 8” reinforced mounting base• Dual support reinforced leg base• Dual support guide arm• Dual support 1-3/8” axle• Fully enclosed multi-position release ratchet• Powder coated for corrosion free performance• Nine position adjustable guide arm• Four direction, non snag rollers• Anti lock-out ratchet mechanism prevents reel from locking up when hose is fully extended• Solid brass swivel fitting• 50’ / 2250 PSI hose included• 3/8” fittings• Shipping Weight: 57 lbs. (26 Kg)

20-Gallon Rolling Air RD-20SE Evacuation Oil DrainFeatures / Specs

• Lightweight for easy portability• Safe and easy to use• Rugged 20-gallon steel container• Rugged 16” diameter funnel• Adjustable height from 52” to 83”• Tamperproof air regulator

• Translucent sight tube on side for easy viewing of fluid level• Quick-release “lift-lock” drain tube for easy use• Comes standard with 10’ translucent evacuation hose with drip-less quick-coupler

• Non-corrosive telescoping tube• Preset safety pressure valve• Convenient pull handle on top of container for easy positioning• Heavy-duty 3” ball bearing casters with locks


2222

Stands / Cranes

1650-Lb. High RJS-1T RJS-1TF Reach Jack Stands Features / Specs

• Stabilizes vehicles that are raised on lifts• Heavy-steel construction for maximum durability• Quick adjust spin type handle with thrust bearing• Hardened ACME screw for easy adjustment• Wide base provides maximum stability• Thick, rubber adjustable pad for maximum support• Holding Capacity: 1,650 lbs. (748 Kg)• Lowered Height: 54-1/2” (1384 mm)• Maximum Height: 80-1/2” (2045 mm)• Base Dimensions: 12” (305 mm) diameter• Shipping Weight: 36 lbs. (16 Kg)

RJS-1TF• Includes “Jiggle Jack” foot pedal• Shipping Weight: 38 lbs. (17 Kg)

6-Ton Heavy DutyJack Stands RJS-6TFeatures / Specs

• Sold in pairs• Welded steel construction for maximum durability • Safety ratchet design assures stand remains locked under load • Convenient handle and column release• Holding Capacity: 12,000 lbs. (5443 Kg)• Lowered Height: 15-1/2” (394 mm)• Maximum Height: 24-1/2” (622 mm)• Base Dimensions: 9” x 10-1/2” (229 mm x 268 mm)• Shipping Weight: 32 lbs. (15 Kg)

12-Ton Super DutyJack Stands RJS-12TFeatures / Specs

• Sold in pairs• Welded steel construction for maximum durability• Safety ratchet design assures stand remains locked under load• Convenient handle and column release• Holding Capacity: 24,000 lbs. (10886 Kg)• Lowered Height: 17-3/4” (451 mm)• Maximum Height: 28-1/2” (724 mm)• Base Dimensions: 12” x 10-3/4” (305 mm x 273 mm)• Shipping Weight: 60 lbs. (27 Kg)

3-Ton Heavy DutyJack Stands RJS-3TFeatures / Specs

• Sold in pairs• Welded steel construction for maximum durability• Safety ratchet design assures stand remains locked under load• Convenient handle and column release• Holding Capacity: 6,000 lbs. ((2722 Kg)• Lowered Height: 11-1/2” (292 mm)• Maximum Height: 17” (432 mm)• Base Dimensions: 7” x 7-1/2” (178 mm x 190 mm)• Shipping Weight: 17 lbs. (8 Kg)

RJS-1TF

“Jiggle Jack” Foot PedalAdds four inches of Extra Lift

Safety Ratchet DesignAssures stand remains locked under load at all times

RJS-1T


2323

1500 lb. Engine Support RST-500ESFeatures / Specs

• Straddles inner fender wells to support engines• Adjusts to fit all vehicles• Precisely positions engine allowing easy removal of gear boxes and transmissions• Perfect for 4 and 6 cylinder engines• Rubber foot pads prevent damage and holds load securely• Holding Capacity: 1,500 lbs. (680 Kg)• Maximum Width: 42” (1067 mm)• Minimum Width: 26-1/2” (673 mm)• Screw Travel: 18-3/4” (476 mm)• Shipping Weight: 40 lbs. (18 Kg)

2-Ton Folding Shop Crane RSC-2TFFeatures / Specs

• Designed for shops with limited space• Folds for easy storage• Heavy steel construction for maximum durability• Boom is reinforced to increase strength and eliminate flex• Includes 8-ton capacity ram• Heavy-duty steel casters for easy positioning

• Front casters include a safety brake to prevent movement• Telescopic boom provides 4 positions• Includes heavy steel hook with safety latch• Wide base for maximum stability• Boom Length: 40”- 63” (1016-1600 mm)• Base Length: 69” (1753 mm)

• Boom Capacities: 4,400 lbs (1996 Kg) 3,300 lbs (1497 Kg) 2,200 lbs (998 Kg) 1,100 lbs. (499 Kg)• Maximum Boom Height: 80” (2032 mm) 84” (2134 mm) 89” (2261 mm) 93” (2362 mm)• Shipping Weight: 257 lbs. (117 Kg)

1-Ton Folding Engine Stand RES-1TFFeatures / Specs

• Folds upright to conserve valuable shop floor space• Heavy steel construction for maximum durability• Neck is reinforced to increase strength and eliminate flex• Long rubber-grip handle eases positioning• Head swivels 360° to easily position engine• Slotted adjustable saddle permits quick and easy installation

• Heavy-duty swivel casters• Four-wheel design provides maximum stability• Holding Capacity: 2000 lbs. (907 Kg)• Overall Height: 37” (940 mm)• Overall Length: 36” (914 mm)• Rear Width: 87” (2210 mm)• Front Width: 33-1/4” (845 mm)• Shipping Weight: 100 lbs. (45 Kg)

Quick-Release PinPush/Pull Clevise Design

• Stabilizes vehicles that are raised on lifts• Heavy-steel construction for maximum durability• Quick adjust spin type handle with thrust bearing• Hardened ACME screw for easy adjustment • Wide base provides maximum stability• Thick, rubber adjustable pad for maximum support• Holding Capacity: 4,000 lbs. (1814 Kg)• Lowered Height: 55” (1397 mm)• Maximum Height: 87” (2210 mm)• Base Dimensions: 24” x 24” (609 mm x 609 mm)• Shipping Weight: 45 lbs. (20 Kg)

2-Ton High Tripod RJS-2TH Jack Stands Features / Specs


2424

Presses / Crushers / Carts / Specialty

Automobile Carts RCD-1TDFeatures / Specs

• Sold in pairs• Perfect for moving disabled vehicles• Swivel casters allows operator to move vehicles in all directions• Deep wheel wells keep vehicles secure• 3-1/2” cast iron ball bearing casters

• Sturdy welded steel construction• Capacity each: 1,000 lbs. (454 Kg)• Dimensions: 15-1/2” x 23-1/2” (394 mm x 597 mm)• Shipping weight: (pair): 50 lbs. (23 Kg)

20-Ton Commercial-Grade RP-20HDHydraulic Shop Press Features / Specs

• Ideal for pressing bearings, U-joints, etc.• Hydraulic cylinder moves laterally for better versatility• Integrated 4” diameter 20-ton pressure gauge• Independent two-speed hydraulic pump for maximum performance• Adjustable table height• Includes 2 heavy-duty press plates

• Heavy steel construction• Capacity: 40,000 lbs (18144 Kg)• Overall Height: 60-1/4” (1530 mm)• Overall Width: 37” (940 mm)• Inside Width Between Rails: 24” (610 mm)• Adjustable Table Height: 7-1/2” – 36-1/4” (191 mm x 921 mm)• Base Dimensions: 27-1/4” x 26” (692 mm x 660 mm) • Cylinder Stroke: 5-1/2” (140 mm) • Shipping Weight: 255 lbs. (116 Kg)

20-Ton Bottle Jack RP-20TShop Press Features / Specs

• Ideal for pressing bearings, U-joints, etc. • Adjustable table height• Includes 2 heavy-duty press plates• Hydraulic pump unit for maximum performance

• Heavy steel construction• Capacity: 40,000 lbs (18144 Kg)• Overall Height: 61” (1549 mm)• Overall Width: 27” (686 mm)• Cylinder Stroke: 8” (203 mm)• Shipping Weight: 211 lbs. (96 Kg)

RP-20HD 4” diameter, 20-Ton Pressure Gauge

RP-20T20-Ton Bottle Jack

RP-20HD 2-Speed Hydraulic Assist Hand Pump

Heavy-Duty Steel Press Plates Standard on both the RP-20HD

and the RP-20T

Vehicle Dolly RCD-1VFeatures / Specs

• Ideal for moving dismantled vehicles• Includes saddles for easy alignment• Use as a single unit or in pairs• Lifting Capacity: 1,500lbs. (680 Kg)• Overall Height: 12” (305 mm)

• Caster Size: 4-1/2” (114 mm)• Dimensions: 52” x 24” x 14” (1321 x 610 x 356 mm)• Shipping Weight: 80 lbs. (36 Kg)

Quick-Release PinPush/Pull Clevise Design


2525

RP-20FC Industrial 10-Ton Oil Filter / Can Crusher

This industrial-use can crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter or can, easily reducing it to 25% of its original size and removing 95% of the oil. An integrated collection chamber and collector downspout makes oil recovery a cinch. At the drastically reduced size, cans and oil filters are much cheaper to dispose of, so the Ranger RP-20FC is good for the environment AND your bank account. Perfect for crushing light-duty truck and automotive filters. Even the popular 8” tall filters for Cummins and Powerstroke diesel-powered vehicles fold beneath the massive weight of this crusher.

This rugged metal stand is recommended for use with the Ranger RP-20FC Oil Filter Crusher. The generous design accommodates used oil storage tanks ranging from 5 – 55-gallon sizes, even when positioned on top of drum dollies. At the same time, you’ll be delighted by the space-efficiency and safety this unit brings to your work area. Simply slide storage barrels beneath the stand and you’re done! The tanks are now ready to receive waste oil from the crusher’s downspout tube. It doesn’t get any simpler.


• Save on disposal costs and storage space• Fulfills EPA and other mandated environmental standards• No-mess design operates clean and efficiently to lessen spill hazards• Single-control valve operation• Exclusive X-shape bevel in press head pre-aligns filters for absolute vertical press• Welded steel plate construction• 12-1/2” diameter cylinder providers a maximum crushing pressure of 20,000 lbs.

• Crushes cans in only 20 seconds• Reduces filters to 25% of their original size• Removes up to 95% of the oil• 100% air operated for minimal maintenance• Automatic safety door stops operation when opened• Transparent door for a convenient view of the crushing process• Pressure regulator and air moisture separator come standard

• Overall height: 29-1/2” / 749 mm• Overall width: 17” / 432 mm• Overall depth: 17” / 432 mm• Chamber opening height: 11” / 279 mm• Chamber opening width: 8” / 203 mm• Chamber opening depth: 11” / 279 mm• Average cycle time: 15 – 20 seconds• Air input: 125 – 175 psi• Shipping weight: 228 lbs. / 103 kg

Oil Filter During Crushing Process

1-Gal Can During Crushing Process

Optional Bolt-On Stand


2626

10-Ton Porta-Power RP-10TPFeatures / Specs

• 10-Ton capacity• A must for body-shop repair• 10,000 PSI hydraulic pump unit for maximum performance• Built-in safety overload valve• Heavy steel construction

• Includes; 10,000 PSI pump, 6’ hose, 6” stroke ram, wedge ram, 5”, 10”, 14”, and 19” extension tubes, tube connector, serrated saddle, rubber head, wedge head, 90 degree “V” base, flat base, ram toe head and plunger toe• Shipping Weight: 74 lbs. (34 Kg)

RST-1WS Rolling Work Seat Features / Specs

• Sturdy, 1” steel tubing construction• Padded seat• Work more efficiently• Relieves sore back muscles• Perfect for wheel / service work• Ball bearing swivel casters• Includes convenient under-seat tray• Shipping Weight: 11 lbs. (5 Kg)

Small Material Bender RB-1STFeatures / Specs

• Heavy, solid steel construction• Perfect for bending solid, round and flat steel bars or tubing• Includes bracket for installation on machinery or bench-top• Bends virtually all popular small tubing and square stock sizes• A must for muffler shops and specialty fabricators• Perfect for fabricating small diameter tube lines and a variety of brackets and hangers• Multiple sizes are machined into dies eliminating the need for numerous die sets for quick-change tooling• Maximum Bending Depth: 90 degrees

• Tubing Sizes: 1/4”, 3/8”, 1/2” and 5/8”• Round Stock Sizes: 3/16”, 1/4”, 5/16”, 3/8”, 7/16” and 1/2”• Flat Stock Sizes: 1/8” x 2-1/4”, 3/16” x 1-1/2” and 1/4” x 1”• Shipping Weight: 48 lbs. (22 Kg)

Creeper RST-1CFeatures / Specs

• Full length padded center cushion and headrest• Six swivel casters for easy maneuverability• Sturdy steel tubing construction

• Dropped center for added stability• Low profile design• Ball bearing swivel casters• Shipping weight: 16 lbs. (7 Kg)

IndustrialCan Crusher RP-6KCFeatures / Specs

• 100% air operated, reduces cans to 20% of their original size• Max. crushing pressure: 3.0 tons (6,000lbs)• Time to crush can: 20 seconds• Working Stroke: 13-7/8” (350 mm)• Air Supply: 140 -160 psi• Total Weight: 121 lbs. (55 Kg)• Overall Width: 15” (380 mm) • Chamber Width: 13-3/8” (340 mm)• Overall Depth: 12” (305 mm) • Chamber Depth: 10-7/16” (265 mm)• Overall Height: 36-5/8” (930 mm) • Chamber Height: 14-15/16” (380 mm)

Presses / Crushers / Carts / Specialty


2727

Heavy-Duty Tear-DownBench With Fluid Catch RWB-1TDFeatures / Specs

• Lock valuable tools in the heavy-duty 24” x 18” x 5 1/2” drawer• Adjustable working height• Working load capacity: 500-lb. (227 Kg)• Heavy duty 4” casters (2 rigid & 2 locking swivel)• 14 gauge 48” x 28” table top with 3/4” rim to contain liquids• Fluid drains into removable 20” x 12” x 6” (polyethylene) container for easy clean up• Adjustable lower shelf• Length 48” x Width 28” x Depth 3/4” (Length 1219 x Width 711 x Depth 19 mm)• Weight 185 lbs. (84 Kg)

Rolling Work Table RCD-65Features / Specs

• Ideal for mechanics while working under vehicles• Load capacity: 55 lbs. (25 Kg)• Pivoting table top and adjustable base• Reaches into engine compartments• Heavy-duty steel construction• Includes tool holders• Shipping Weight: 61 lbs. (28 Kg)

Three-Tray Rolling Tool Cart RCD-3TRFeatures / Specs

• Heavy-duty steel construction• Ideal for garage, office and warehouse• Heavy steel construction• Tough red enamel finish• Features three trays – 16” x 32” (406 mm x 813 mm)• Shipping Weight: 40 lbs. (18 Kg)

2-Shelf Work Bench RWB-2SFeatures / Specs

• Type: ................................................. Industrial Grade 2-Shelf Work Bench• Overall Color: ............................................................................ Red Gloss• Paint Finish: .................................... Electrostatic Oven Baked Powder Coat• Drawer Construction: ............. Rolled Edges For Added Strength and Rigidity• Material / Top: ...................................Durable 5/32” H.D. Rolled Edge Steel• Material / Shelves: .............................Durable 3/32” H.D. Rolled Edge Steel• Item Weight: .................................................................... 209 lbs. (95 Kg)• Height: ......................................................................... 34-1/2” (876 mm)• Width: ..............................................................................79” (2007 mm)• Depth: ......................................................................... 25-1/4” (641 mm)• Number of Shelves: ................................................................................2

2-Drawer Work Bench RWB-2DFeatures / Specs

• Overall Color: .......................................................................... Red Gloss• Paint Finish: ...................................Electrostatic Oven Baked Powder Coat• Drawer Style: ..................................................................... Full-Extension • Drawer Construction: ............ Rolled Edges For Added Strength and Rigidity• Drawer Slide Type:...................... Full-Extension Ball Bearing Drawer Slides• Locking System: .......................Tumbler Key-Lock Drawer Latching System• Material / Top: .................................. Durable 5/32” H.D. Rolled Edge Steel• Material / Shelf: ............................... Durable 3/32” H.D. Rolled Edge Steel• Item Weight: ................................................................... 168 lbs. (76 Kg)• Height:.........................................................................34-1/2” (876 mm)• Width: ............................................................................. 59” (1499 mm)• Depth: .........................................................................25-1/4” (641 mm)• Number of Drawers: ..............................................................................2

Rolled Top Edges and Multiple Fold

Construction

Full Extension, Double Acting Ball Bearing

Drawer Slides


2828

Tool Storage / Benches

RTB-13DC

RTB-8DT

RTB-8D

Shown as ComboRTB-8D / RTB-13DC

Shown as ComboRTB-8DT / RTB -13DC

13-Drawer Tool Cabinet RTB-13DCFeatures / Specs

• Handle / Grip: Tubular Pull Handles / Left and Right Sides• Paint Finish: Electrostatic Oven Baked Powder Coat• Protective Top Mat: Yes / Standard / Lacquered Wood• Rubber Drawer Liners: Yes / Standard• Drawer Style: Full-Extension / Full-Width• Drawer Construction: Rolled Edges For Added Strength and Rigidity• Drawer Handle: Brushed Aluminum• Drawer Slide Type: Full-Extension Ball Bearing Drawer Slides• Locking System: Tumbler Key-Lock Pivot Drawer Latching System• Casters: 2 Heavy-Duty Fixed Urethane Casters / 2 Heavy-Duty Swivel Urethane Casters With Brake• Body Material: Heavy-Gauge Steel• Construction: Durable Roll-Cage Continuous Beam Construction• Packaging: Wrapped in Poly Bag / Placed in Inner Carton / Placed in Larger Outer Carton / Palletized• Item Weight: 285 lbs. (129 Kg)• Height: 40” (1016 mm)• Width: 42” (1067 mm)• Depth: 19” (483 mm)• Number of Drawers: 13• Dim: 5 Drawers: 23-1/2” x 16-3/4” x 3”• Dim: 5 Drawers: 13-1/4” x 16-3/4” x 3”• Dim: 1 Drawer: 37-3/4” x 16-3/4” x 4”• Dim: 1 Drawer: 23-1/2” x 16-3/4” x 6”• Dim: 1 Drawers: 13-1/4” x 16-3/4” x 6”Mates with RTB-8D

8-Drawer Top Tool Chest RTB-8DTFeatures / Specs

• Handle / Grip: Chrome Side Handles • Paint Finish: Electrostatic Oven Baked Powder Coat• Top Storage Compartment• Rubber Drawer Liners: Yes / Standard• Drawer Style: Full-Extension / Full-Width• Drawer Construction: Rolled Edges For Added Strength and Rigidity• Drawer Handle: Brushed Aluminum• Drawer Slide Type: Full-Extension Ball Bearing Drawer Slides• Locking System: Tumbler Key-Lock Pivot Drawer Latching System• Body Material: Heavy-Gauge Steel• Construction: Durable Roll-Cage Continuous Beam Construction• Packaging: Wrapped in Poly Bag / Placed in Inner Carton / Placed in Larger Outer Carton / Palletized• Item Weight: 142 lbs. (64 Kg)• Height: 17-1/2” (445 mm)• Width: 41-1/2” (1054 mm)• Depth: 18-1/2” (470 mm)• Number of Drawers: 8• Dim: 4 Drawers: 23-1/2” x 15-3/4” x 3”• Dim: 4 Drawers: 13-1/4” x 15-3/4” x 3”

RTB-8D• Item Weight: 135 lbs. (61 Kg)• Protective Top Mat: Yes / Standard / Rubber MatRTB-8D & RTB-8DT Mate with RTB-13DC


2929

7-Drawer Tool Cabinet RTB-7DCFeatures / Specs

• Handle / Grip: Tubular Pull Handle / Left Side• Protective Top Mat: Yes / Standard / Rubber Pad• Casters: 2 Heavy-Duty Fixed Urethane Casters / 2 Heavy-Duty Swivel Urethane Casters With Brake• Packaging: Wrapped in Poly Bag / Placed in Inner Carton / Placed in Larger Outer Carton / Palletized• Item Weight: 149 lbs. (68 Kg)• Height: 39-1/2” (1003 mm)• Width: 26-3/4” (679 mm)• Depth: 18-1/4” (464 mm)• Number of Drawers: 7• Dim: 5 Drawers• 22-1/2” x 15-3/4” x 2-3/4”• Dim: 2 Drawers: 22-1/2” x 15-3/4” x 6”Mates with RTB-2D / RTB-9D / RTB-10D

RTB-7DC

RTB-9D

Top Tool ChestsFeatures / Specs

• Handle / Grip: Chrome Side Handles• Paint Finish: Electrostatic Oven Baked Powder Coat• Hinged Top Lid: Double-Rolled / Heavy-Duty Chrome Lid Stays• Rubber Drawer Liners: Yes / Standard• Drawer Style: Full-Extension / Full-Width• Drawer Construction: Rolled Edges For Added Strength and Rigidity• Drawer Handle: Brushed Aluminum• Drawer Slide Type: Full-Extension Ball Bearing• Locking System: Tumbler Key-Lock Pivot Drawer Latching System• Body Material: Heavy-Gauge Steel• Construction: Durable Roll-Cage Continuous Beam Construction• Packaging: Wrapped in Poly Bag / Placed in Inner Carton / Placed in Larger Outer Carton / Palletized• Protective Top Mat: Yes / Standard / Rubber Pad

RTB-2D • Item Weight: 30 lbs. (14 Kg) • Height: 10-1/4” (260 mm) • Width: 26-1/2” (673 mm) • Depth: 12-1/4” (311 mm) • Number of Drawers: 2 • Dim: 1 Drawer: 22-1/2” x 10-3/4” x 2-3/4” • Dim: 1 Drawer: 22-1/2” x 10-3/4” x 3-3/4” Mates with RTB-9D / RTB-7DC / RTB-10D

RTB-9D • Item Weight: 70 lbs. (32 Kg) • Height: 17-1/4” (438 mm) • Width: 26” (660 mm) • Depth: 12” (305 mm) • Number of Drawers: 9 • Dim: 6 Drawers: 6-3/4” x 10-3/4” x 1-3/4” • Dim: 2 Drawers: 22-1/2” x 10-3/4” x 1-3/4” • Dim: 1 Drawer: 22-1/2” x 10-3/4” x 2-3/4” Mates with RTB-2D / RTB-7DC

RTB-10D• Hinged Top Lid: Double-Rolled / Channel Stiffener / Heavy-Duty Chrome Lid Stays• Packaging: Wrapped in Poly Bag / Double Boxed / Palletized• Item Weight: 98 lbs. (44 Kg)• Height: 19-3/4” (502 mm)• Width: 26” (660 mm)• Depth: 16” (406 mm)• Number of Drawers: 10• Dim: 6 Drawers: 6-1/2” x 14-3/4” x 1-3/4”• Dim: 1 Drawer: 6-3/4” x 14-3/4” x 5-1/2”• Dim: 2 Drawers: 22-1/2” x 14-3/4” x 1-3/4”• Dim: 1 Drawer: 22-1/2” x 14-3/4” x 2-3/4”Mates with RTB-2D / RTB-7DC

RTB-2D

RTB-10D Shown as Combo RTB-2D RTB-7DC RTB-9D

Shown as ComboRTB-7DC / RTB-10D

Shown as ComboRTB-7DC / RTB-9D


3030

Rugged Construction All Ranger® toolboxes and cabinets feature high-grade 16-gauge and 18-gauge steel

cabinets and drawers. Welded continuous beam construction and rolled edges provide better

durability, added strength and safety.

Attention to Detail Solid aluminum and plated steel hardware set

off the triple-baked powder coat paint finish that resists scratches, oil, dirt and most solvents.

Finger-release drawer locks on the slides allow drawer removal for cleaning.

HD-Chrome, Ball Bearing Slides Rugged, full-extension, double-acting

HD-chrome ball bearing drawer slides permit smooth, full-drawer extension. Slide limit

stops keep drawer from extending beyond the chest frame.

Brushed Aluminum Handles Each tool storage unit features full-length brushed aluminum drawer handles that

incorporate replaceable drawer identification labels with see-through plastic covers. Padded

rubber drawer liners come standard.

Tubular Steel HandlesWe build our cabinets with large, tubular steel push / pull handles for easy handling. Heavy-gauge steel top, bottom and back panels are

securely welded to the internal cage constructed sidewalls for maximum strength.

Non-Slip Rubber or Wood Tops Protective, non-slip rubber top mats come standard on models RTB-2D, RTB-8D and RTB-7DC. A wood top is featured on the

monstrous RTB-13DC. These tops turn your toolbox or cabinet into a mobile workstation.

Exclusive Lok-Latch™ SystemThe Lok-Latch™ drawer latching system keeps drawers secure when closed. Multiple drawer

selection offers convenient sizes for storing tools of all sizes and shapes in addition to bulk-storage

of large tools and miscellaneous repair items.

Internal Cage & Reinforced SidewallsEach Ranger® toolbox and cabinet features

durable internal cage construction and reinforced sidewalls for maximum strength. Tamper-proof,

tumbler key-lock rear pivot drawer locking system cannot be reached by bolt cutters or

hacksaw. Includes heavy-duty chrome side-handles for easy handling.

Heavy-Duty Urethane Casters1-piece bottom panels are welded outside the cabinet, providing for a solid foundation to help

absorb bumps and eliminate stress on the cabinet spot welds. Easy-to-roll, low-drag,

heavy-duty fixed swivel urethane casters with toe brake can be used in most wet or

corrosive environments.

Tool Storage / Bench FeaturesMore Features • Greater Durability • Better Performance • Superior Quality by Design

Tool Storage / Benches


3131

Ranger® Spray Wash Cabinets are warranted for five years on cabinet enclosure and one year on all operating components to the original purchaser, to be free of defects in

material and workmanship. Ranger Products® shall repair or replace at their option for this period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products® will pay labor costs for

the first 12 months only on parts returned as previously described.

Ranger® Wheel Service Equipment is warranted for one year on all operating components to be free of defects in material and workmanship.

Ranger Products® shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products® will pay labor costs for the first

12 months only on parts returned as previously described.

Ranger® Shop Equipment is warranted for one yearto be free of defects in material and workmanship. Ranger Products® shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective.

Ranger Products® will pay labor costs for the first 12 months only on parts returned as previously described.

Ranger® Hydraulic Jacks are warranted for one yearto be free of defects in material and workmanship. Ranger Products® shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective.


Ranger® Tool Storage and Benches are warranted for one year to be free of defects in material and workmanship. Ranger Products® shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective.


These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation or lack of required

maintenance. This warranty is exclusive and in lieu of all other warranties expressed or implied. In no event shall BendPak Inc. / Ranger Products® be liable for special, consequential or incidental damages for the breach or delay in performance of the warranty. BendPak Inc. / Ranger Products® reserves the right to make design changes or add improvements to its product line without incurring any obligation to make such changes on product sold previously.

Warranty adjustments within the above stated policies are based on the model and serial number of the equipment. This data must be furnished with all warranty claims.

* FULL WARRANTY STATEMENTS CAN BE FOUND IN THEIR RESPECTIVE MANUALS.

Ranger Products® provides our customers with a specialized service program known as Certified Service. Our fully staffed Customer Care Center (CCC) is available to meet all of your support needs including; highly responsive technical support, one-on-one communication with account representatives and technical experts, electronic data

interchange, a highly-efficient logistics support chain, automated dispatch and communications system and a tightly integrated system that allows incident management, trouble-shooting and reporting to be provided

to customers seamlessly, regardless of location.


Brought to you by:Inquire about these cert i f icat ion l ist ings.

www.bendpak.com

www.rangerproducts.com

A Strong FutureBendPak Inc. is one of the largest and strongest automotive service equipment manufacturers in the global vehicle repair marketplace. All around the world, the BendPak brand is recognized as the badge of quality. For the past 45 years, we’ve been pioneering service equipment technology, marketing, and training programs, as well as operational and supply systems that are now considered the standard for the entire industry. The BendPak story began back in 1965 with the opening of QMA, Quality Machine & Associates. The new business, wholly owned and operated by Don Henthorn, quickly gained a reputation as a premier manufacturer, specialized in precision machine work and servicing customers like Rocketdyne, Rockwell and Hughes Aircraft. In 1979, QMA began development on its newest project—a hydraulic tubing bender designed for muffler shops. They settled on the brand name BendPak, and a legacy was born.

Global Manufacturing / Sharing a Common Focus on ExcellenceAll sales, final inspections, engineering, testing, product development and standards certifications are performed at our factory in Santa Paula, CA. Other production is performed at BendPak operated factories overseas that are responsible for component manufacturing. Our current facilities encompass over 600,000 square feet and consist of vertically integrated manufacturing, operations and logistics facilities across the globe. They are all ISO 9000 and 9001 accredited, further supporting our position as a premier global manufacturer. At BendPak, we ensure that our offshore manufacturing is no different in approach, standards, quality, inspection or packaging from our domestic production. These facilities are audited year round and undergo systematic evaluation of documented quality programs such as TUV, ANSI/ALI ALCTV, CSA, UL and AS/NZS 1418.9. The program is audited quarterly, regardless of the facility location, to ensure continued compliance with all applicable standards.

Experience CountsNo other full-service equipment provider has the industry and technology know-how that we’ve developed over our 45-year history. BendPak Inc. provides service to more than 350,000 satisfied customers worldwide. Our trained and certified structural and engineering staff averages over 25 years of industry experience. Plus, a fully staffed customer care center (CCC) is conveniently available with experienced personnel that are available to meet all your support needs.

Customer Care Center (CCC)BendPak Inc.’s customer care center offers service, installation and equipment troubleshooting, right over the phone. If a resolution cannot be promptly reached over the phone, a factory technician or service provider may be dispatched to resolve the situation on-site, with replacement parts in-hand. Our technical support staff has direct access to tools, equipment and / or necessary manufacturer’s technical and engineering resources to resolve any complex technical issue as quickly as possible.

Large Parts InventoryBendPak Inc.’s “Spare in the Air” repair strategy provides overnight-or-sooner part replacement. With a single phone call, our expert service teams will work expeditiously to identify the equipment problem and facilitate timely repair or parts replacement. Our comprehensive spares inventory and partnerships with industry-leading service providers ensure the quickest possible turnaround. What’s more, BendPak’s warehouses and shipping processes are state-of-the-art. A logistics support team verifies availability, inventory, shipping and delivery from start to finish. So when you buy BendPak, you’re getting more than great automobile service equipment. You’re getting peace of mind.

© 2009 BendPak Inc. • BendPak Inc. and Ranger Products are registered trademarks. • Products shown in this catalog may be produced or assembled in BendPak factories located in the USA, Taiwan, China or other foreign countries.

BendPak / Ranger Products1645 Lemonwood Dr.Santa Paula, CA USA 93060Tel: 1-805-933-9970 Fax: 1-805-933-9160www.bendpak.com / www.rangerproducts.com

Date post:	13-Mar-2016
Category:	Documents
Upload:	derek-taylor
View:	217 times
Download:	0 times

Ranger 2010 Catalog

Documents