RANOPT User Reference Guide.pdf

RANOPT User Reference Guide

Software Version 6.1

Reference Guide Edition 1

© Copyright 2008 AIRCOM International All rights reserved

ADVANTAGE, ASSET, CONNECT, DATASAFE, DIRECT ENTERPRISE, NEPTUNE, ARRAYWIZARD, OPTIMA, OSSEXPERT, and WEBWIZARD are recognised trademarks of AIRCOM International. Other product names are trademarks of their respective companies.

Microsoft Excel , .NET™, Microsoft Office, Outlook , Visual Basic Windows®,

Windows XP™, Windows Vista™ and Word are trademarks of the Microsoft Corporation.

This documentation is protected by copyright and contains proprietary and confidential information. No part of the contents of this documentation may be disclosed, used or reproduced in any form, or by any means, without the prior written consent of AIRCOM International.

Although AIRCOM International has collated this documentation to reflect the features and capabilities supported in the software products, the company makes no warranty or representation, either expressed or implied, about this documentation, its quality or fitness for particular customer purpose. Users are solely responsible for the proper use of ENTERPRISE software and the application of the results obtained.

An electronic version of this document exists.

This User Reference Guide finalised on 16 May 2008.

Refer to the Online Help for more information.

This User Reference Guide prepared by:

AIRCOM International Ltd Cassini Court Randalls Research Park Randalls Way Leatherhead Surrey KT22 7TW

Telephone: +44 (0) 1932 442000 Support Hotline: +44 (0) 1932 442345 Fax: +44 (0) 1932 442005 Web: www.aircominternational.com

RANOPT User Reference Guide Page 5 Version 6.1

Contents

Chapter 1 Introduction to RANOPT 11

About the RANOPT Products 12

About RANOPT Server 12 About RANOPT Standard (Standalone User Licence) 13 About RANOPT Lite (ASSET Drive Test Module) 13

RANOPT Supported Technologies 14

About This Manual 14

RANOPT System Architecture 15

Explanation of Symbols 15

Obtaining User Assistance 16

Who is This User Reference Guide For? 17 About the ENTERPRISE User Reference Guides 18 Can You Improve Our User Assistance? 19 Obtaining Support 19 Obtaining Further Information and Services 21

Chapter 2 Getting Started using the RANOPT Administrator 23

Logging in to a Database 24

Choosing the Database for Loading Data 25

Configuring a Message Log 26

Creating and Modifying Equipment 27

How Data for Equipment is Converted into Files 27 Setting up the Global File Location 27 Creating New Equipment 28

Creating and Modifying Template Strings 31

Creating a Template String using a Text Editor and Wizard 31 Creating a Template String Manually 33

Creating and Modifying Network Operators 33

Creating a Network Operator 34 Modifying and Deleting Network Operators 36

Creating and Modifying Data Manipulation Techniques 37

Creating a Data Manipulation Technique 37 Modifying and Deleting Data Manipulation Techniques 41

Configuring the Layer 3 Messages Colours 42

Upgrading Reports 43

Upgrading the RANOPT Database 44

Creating and Upgrading Databases Using the Installation Wizard 45

Managing Groups and Users 47

Creating Groups 48 Modifying and Deleting Groups 50 Creating Users 50 Modifying and Deleting Users 52

Page 6 RANOPT User Reference Guide Version 6.1

Registering Search Strings 52

About Message Logs 54

Viewing and Searching Message Logs 54 Clearing and Refreshing Message Logs 55 Saving and Loading Message Logs 55

Using Multiple Tablespaces In RANOPT 55

Registering Tablespaces 56

Chapter 3 Using the RANOPT User Interface 57

About the Evolution of the RANOPT User Interface 58

About the RANOPT Main Toolbar 59

About the RANOPT Administrator 60

About the RANOPT Tools Menu 61

About the RANOPT Workspace 61 About the RANOPT Filter Manager 62 About the RANOPT File Load Wizard 63 About the RANOPT Chart View 64 About the RANOPT Report Registry 65 About the Snapshot Manager 66 About the Rules Manager 67 About the Database Explorer 68

About the RANOPT Replay Menu 68

About the RANOPT Analysis Menu 69

About the Signalling Messages Window 69 About the GPS Navigation Window 70 About the DQA Messages Window 70 About the Windows Manager 71 About the Desktop Manager 72

About the Speed Control 72

About Replay Positioning 73

Chapter 4 Loading Drive Test Files 75

Resolving of Cell Sites in RANOPT 75

Setting up Loading Data for Analysis 78

Loading Drive Test Data 79

Troubleshooting Data Loading 83

Chapter 5 Using the Report Registry 85

Managing Parameters in the Report Registry 86

Creating Parameters 87 Modifying and Deleting Parameters 91 Copying Parameters 92 Exporting Parameters 93 Exporting a Parameter Group 94 Importing Parameters 96

Creating Charts for Parameters 96


About the SQL Format for Defining Charts, Maps and Grids 96 Creating Bar Charts for Parameters 97 Creating Line Charts for Parameters 99 Creating Event Charts for Parameters 101 Creating Background Charts for Parameters 104

Creating Maps for Parameters 106

Creating Colour Range Maps 106 Creating Image Maps 109 Creating Line Maps 111

Creating Grids for Parameters 113

Creating a Horizontal Grid 113 Creating a Vertical Grid 115 Creating Table Views 117

Adding a Query Variable to an SQL Statement 119

Using a Checklist in a Query Variable 119 Using a Droplist in a Query Variable 120

Managing Reports in the Report Registry 121

Creating Reports 122 Modifying and Deleting Reports 124 Importing and Exporting Reports 125 Exporting a Reports Group 127 Creating SQL Statements for Reports 129 Modifying and Deleting SQL Statements for Reports 130 Creating Report Parameters for Reports 131 Modifying and Deleting Report Parameters for Reports 132

Chapter 6 Using the RANOPT Filter Manager 133

Opening the RANOPT Filter Manager 134

About the Icons Used in the Filter Manager 135

Using Filters in RANOPT 136

Creating Filters in RANOPT 136 Modifying a Filter 145 Adding Filters to the Workspace 146 Applying Filters in RANOPT 147 Managing Filters in RANOPT 148 Creating a Quick Polygon Filter in the Filter Manager 149 Viewing a List of Data Sessions 151 Refreshing the List of Public Filters 152

Working with Reports in the Filter Manager 152

Specifying Parameter Values for Reports 152 Defining the Report Template Directory 154 Generating Reports from the Filter Manager 154 Generating Benchmarking Reports 156

Geo-mapping UE Results with Scanner Results in RANOPT 157

Creating Parameter Rules 159

Creating a Rule Set 159 Creating Rules within a Rule Set 160 Modifying Rule Sets and Rules 163 Deleting Rule Sets and Rules 164

Creating and Viewing Snapshots 164

Creating Snapshots 165 Modifying and Deleting Snapshots 167


Viewing Snapshot Data 167

Defining Map Offsets for Drive Test Data 168

Creating Map Offsets 169 Modifying and Deleting Map Offsets 170

Exporting Data from the Filter Manager 171

Exporting Results Data for a Filter 171 Exporting Scanner Results Data Using the Export Wizard 173

Chapter 7 Analysing Data 177

Replaying Drive Test Measurements 178

Selecting Data Elements to Replay in RANOPT 178 Replaying and Stopping Data Elements 179 Replaying Data Using a Line Chart 180 Replaying Data Using a Table View 182 Replaying Data Using a Bar Chart 183 Replaying Data Using a Horizontal Grid 184 About the Parameter Selector 185

Viewing UE Data Using a Network Message 191

Viewing Data Quality Analysis (DQA) Messages 194

Plotting DQA Messages on the Map View 195

Using the Map View When Replaying Data 196

Locating Replay Data from the Map View Window 196 Saving a Snapshot of the Map View 196 Colouring 2g and 3g Cell Sites 197 Creating Text Modules in RANOPT 199 Managing Comments in the Map View Window 205 Zooming in on Routes in the Map View Window 206 Creating Map Modules in RANOPT 207

Viewing The Speed and Direction of Filters 223

Managing the Data Replay Windows in RANOPT 224

Renaming Data Replay Windows 225 Deleting Data Replay Windows 225 Exporting and Importing Replay Windows 226

Saving the Layout of Replay Windows on the Desktop 228

Adding and Deleting Desktops in the Desktop Manager 228 What is Saved for Each Desktop 229 Setting a Default Desktop 235 Modifying Desktops 235 Loading Desktops 236

Chapter 8 Using the Workspace and Database Explorer 237

Using the Workspace 237

Adding and Removing Filters for the Workspace 238 Making Filters Active and Inactive 239 Reloading Measurement Data for Filters in the Workspace 240 Synchronising Filters in the Workspace 240

Using the Database Explorer 240

About the Drive-Test File Explorer 242 About the Load Progress Monitor 246


Chapter 9 Using the RANOPT Task Scheduler 249

Creating Jobs in the RANOPT Task Scheduler 251

Creating Tasks in the RANOPT Scheduler 253

Configuring File Load Tasks 254 Configuring Filter Creation Tasks 257 Configuring Report Running Tasks 259

Modifying and Deleting Jobs and Tasks 261

Changing the Order of Tasks in Jobs 261

Running Jobs 261

Chapter 10 Troubleshooting The RANOPT Installation 263

Troubleshooting the TEMS Parser 263

Troubleshooting the Database Explorer 265

Appendix A RANOPT Export Plans 271

Exporting Data from NEC 271

Exporting Data from TEMS 272

Appendix B RANOPT Supported File Formats 273

Glossary of Terms 275

Index 281



Introduction to RANOPT

RANOPT is a combined 2g, 2.5g and 3g measurement-based statistical analysis tool, which enables you to assess whether the radio network can meet the required grade of service, coverage and soft handover objectives.

In summary, RANOPT:

Is designed for optimising 2g or 3g radio networks - more specifically, it has been designed in conjunction with a global UMTS operator for UMTS network optimisation

Supports scanners and user equipment

Validates the performance of the network prior to commercial launch

Reduces costs associated with validation techniques, the risk of significant performance variations in different locations and the amount of highly skilled engineering resources required

Improves efficiency in fault-finding – you can quickly pinpoint problems and take corrective action

In addition, RANOPT provides these solutions:

Loads and analyses data quickly and efficiently

Analyses scanned or test mobile data, loading it into the database for all users to view

Manages bulk data and generates accurate statistics

Incorporates a highly flexible graphing system with intelligent algorithms to generate reports necessary for network optimisation

Integrates into the ENTERPRISE suite and includes common features such as GIS, so that minimal training is required

Provides access for a multitude of users across an organisational network – this improves optimisation efficiency and avoids duplication of work

C H A P T E R 1


In This Section

About the RANOPT Products 12 RANOPT Supported Technologies 14 About This Manual 14 RANOPT System Architecture 15 Explanation of Symbols 15 Obtaining User Assistance 16

About the RANOPT Products

RANOPT is available as three different products:

RANOPT Server (Server version)

RANOPT Standard (Standalone user licence)

RANOPT Lite (ASSET drive test module)

These different RANOPT products support the same technologies, and can be installed with the three Oracle products (Personal, Standard or Enterprise) based on the following limitations and recommendations:

Oracle Personal With Spatial Oracle Standard Oracle Enterprise

RANOPT Product RANOPT Lite or RANOPT Standard RANOPT Lite or RANOPT Standard RANOPT Server

Number of drive files that may be loaded with the Oracle product

35 10 Unlimited

Number of filters that may be created with the Oracle product

35 5 Unlimited

For more detailed information on each RANOPT product, see the appropriate section below.

About RANOPT Server

RANOPT Server is a multi-user project environment, in which all drive test files are continuously loaded and managed in a centralised data warehouse for benchmark reporting, replay and optimisation analysis.

RANOPT Server has the following features:

Full GSM/GPRS/EDGE and UMTS Optimisation Analysis functionality

File load capabilities that are only restricted by the limitations of your Oracle database

Graphic/geographic display and replay

Layer 3 decoding and analysis

Full library of reports for all supported technologies


RANOPT Server Scheduler, which can perform automated filtering, batch reporting and so on

Troubleshooting module, which suggests causes of problems and highlights action to take

Automatic reporting tool, which enables you to create GIS bitmaps and jpegs

RANOPT Server requires Oracle Enterprise with the Partitioning and Spatial components.

About RANOPT Standard (Standalone User Licence)

RANOPT Standard is useful for individual or standalone project users that require full optimisation analysis functionality. You can load up to 35 drive files and create 35 filters (if partitioning is available - otherwise only 10 drive files and 5 filters) on a standalone machine at any one time for replay and detailed optimisation analysis.

RANOPT Standard has the following features:

Full GSM/GPRS/EDGE and UMTS optimisation analysis functionality

Ability to load five to ten log files for simultaneous review

Quick purge of data for further loading of files

Graphical and geographic display and replay

Layer 3 decoding and analysis

Full library of reports for all supported technologies

RANOPT Standard requires Oracle Standard as a minimum, but Oracle Personal and Enterprise editions can be used. The Oracle Spatial component (available on Oracle Personal or Enterprise) is required for measurement binning.

About RANOPT Lite (ASSET Drive Test Module)

RANOPT Lite can be used to import drive files and replay them. You can do this to review signal strength and measurement quality in comparison with prediction results from ASSET. You can load up to 10 drive files and create 5 filters.

RANOPT Lite has the following features:

Limited analysis functionality (file display and replay only)

Simultaneous display of two drive files

Quick purge of data for further loading of files

GSM/GPRS/GPRS and UMTS Layer 1 graphical display and replay

Important :

RANOPT Lite requires Oracle Standard as a minimum. Oracle Personal or Enterprise editions can also be used, but the file load limit remains the same. The Oracle Spatial component (available on Oracle Personal or Enterprise) is required for measurement binning.


You cannot use RANOPT Lite for Layer 3 decoding and analysis, or reporting.

RANOPT Supported Technologies

RANOPT supports the following technologies:

W-CDMA

GSM

EDGE

GPRS

HSDPA

About This Manual

This manual describes functionality common to optimising 2g and 3g radio networks using RANOPT. It includes information on:

The RANOPT user interface

Post processing of measured data

Loading UMTS scanner and UE data for analysis

Using the report registry

Setting up filters

Generating statistical reports

Replaying data

Analysing data on the Map View Window

The standard statistical reports

The standard Map View elements


RANOPT System Architecture

This picture shows the RANOPT system architecture:

RANOPT System Architecture

All collected drives can be loaded, and this can be done offline with no user intervention (for example, overnight). RANOPT can be deployed using a terminal-server/client-server architecture, which enables drives to be loaded in from any location.

RANOPT exploits the power of an Oracle database to store all of the raw, filtered and manipulated (in other words, binned and/or averaged) data, reports and so on. All data can be shared and accessed from anyone in the organisation at any time.

RANOPT's flexibility enables users to mine data, by using custom reports, queries and algorithms. Tasks that are performed regularly can be scheduled, and if this is done, database maintenance activities can be carried out via RANOPT itself.

Explanation of Symbols

Throughout this guide, where appropriate, some symbols are used to highlight particular pieces of text. Three different symbols are in use, and are explained as follows:

Symbol Brief Description Full Description

Note Signifies text that should be noted or carefully considered.

Tip Signifies text that may help you do something in an easier or

quicker way.

Warning or Important Signifies text that is intended as a warning or something

important.


Obtaining User Assistance

Using Online Help

ENTERPRISE products come with a complete system of online Help which you can access in three ways:

From the Help menu, click Help Contents. Scroll through the table of contents and choose a relevant topic to display.

To search for something particular, from the Help menu, click Help Contents and using the Index tab or Search tab, type in a letter or word to start searching for relevant topics.

Press F1 in a dialog box to view context-sensitive help (available for most dialog boxes).

If you are using ENTERPRISE within a CITRIX environment, to ensure that the Help graphics are displayed, you should ensure that your visualisation settings are configured to display greater than 256 colours.

Using ENTERPRISE User Reference Guides

If you prefer to read printed content, we also provide User Reference Guides. To view or print these as PDFs (Adobe Acrobat portable document format):

1 Make sure you have Adobe Acrobat Reader installed on your PC. If you do not have this, you can install it from the ENTERPRISE CD, or get it from the Adobe website.

Adobe and Acrobat are trademarks of Adobe Systems, Incorporated.

2 Click Start on the taskbar, point to Programs, then AIRCOM International, then ENTERPRISE, then Docs.

- or -

Navigate to the Docs folder in the location where you installed the product.

If neither of these exists, please contact your administrator.

3 Double-click the PDF file that you want to view.

If you have a customer web account, you can also download the latest User Reference Guides from our website.


Checking Release Notes

Each release of the ENTERPRISE software is accompanied by Release Notes, giving important information on system requirements, installation, known issues, upgrades and so on. These notes are included in the ENTERPRISE CD, or you can download them from our website.

For any further documentation, such as application notes and extra reference information, please email the support team at the address described in Obtaining Support on page 19.

Who is This User Reference Guide For?

The ENTERPRISE User Reference Guides are intended for different audiences, depending on the particular product. Typical prerequisites include a good understanding of the following:

The appropriate telecoms technologies and the associated network planning methods (for planning software)

Relational database management, and in particular Oracle database creation and administration procedures (for administrative software)

The various parameters utilised for monitoring and optimising networks (for OSS software)

Irrespective of the particular product, the following basic knowledge is required:

Microsoft Windows concepts

The functions of the Microsoft Office suite of tools, in particular Excel


About the ENTERPRISE User Reference Guides

This table describes our range of User Reference Guides:

This Guide Contains Information On

What's New The main difference between the latest versions of the ENTERPRISE suite.

ENTERPRISE Installation and Administration Installing and configuring ENTERPRISE, your network, and Oracle databases. Using Administrator to create users and groups, and set permissions.

Also contains information on software licensing.

ENTERPRISE Database Reference The relationships between tables in the database and the contents of each table.

ENTERPRISE User Reference Functionality that is common to most of the products in the ENTERPRISE suite, including how to access, view, edit and store data.

ENTERPRISE Technical Reference File formats, as well as antenna and diffraction calculations.

ADVANTAGE User Reference Using ADVANTAGE to plan and optimise networks automatically, consider measured data in analysis/optimisation, analyse network performance, identify problematic areas/cells, and more.

ARRAYWIZARD User Reference Using ARRAYWIZARD to automatically generate coverage predictions and best server arrays, which gives you instantaneous display of coverage and interference information for pre-selected filters when loaded into ASSET.

ASSET User Reference Using ASSET, the network planning and analysis tool, to design a range of cellular networks.

Includes information on hierarchical network planning, propagation modelling, service and bearer definition, coverage analysis, traffic planning, neighbour planning, frequency planning, CW data analysis, detailed reporting, analysis arrays and simulation of network performance.

ASSET Technical Reference Array descriptions and information on some of the algorithms used in ASSET.

CONNECT User Reference Using CONNECT, the network transmission and microwave link planning software for full network physical link design and logical link design.

Also contains CONNECT-specific reference information.

DATASAFE User Reference Using DATASAFE, our network configuration tool to implement both small and large scale changes to networks

DIRECT User Reference Using DIRECT to design telecommunications networks of different network layers. Explains how to plan cellular, PSTN and data networks at a both general and strategic level.

Also contains DIRECT-specific reference information.

NEPTUNE User Reference Using NEPTUNE to collect, import and analyse testmobile data and using the optional module, PROBE for additional analysis.

Also contains reference information on NEPTUNE file formats.

OPTIMA User Reference Using OPTIMA to view performance data and statistics both with ENTERPRISE and standalone using OPTIMA Lite.

OSSEXPERT User Reference Using OSSEXPERT to manage optimisation tasks in wireless networks.

RANOPT User Reference Using RANOPT to efficiently find faults in your network, optimise and validate its performance prior to commercial launch.

WEBWIZARD User Reference Using WEBWIZARD to display GIS and report information of network data, including creating layers, regions, nodes, layer types, administering and configuring the system and using the GIS view, explorer and report viewers.


Can You Improve Our User Assistance?

We are always trying to improve the online Help and User Reference Guides.

If you cannot find the Help you were looking for, need more information, or have any suggestions for improvements, we would be grateful for your feedback.

Also, if you are generally satisfied with these resources, we would appreciate any positive feedback.

Online Questionnaire

You can help us by completing our brief online questionnaire (http://tinyurl.com/y47rqn).

Alternatively, you can contact us directly at [email protected].

Obtaining Support

If you have a difficulty you cannot resolve yourself using the online Help or Reference Guides, or you have found a possible fault in the software, you can log a support request as described below. You may also wish to contact us if you want to:

Register for a customer web account to access the Support area

Obtain further documentation, such as application notes and extra reference information

Logging Support Requests Online

To log a support request online:

1 Go to the AIRCOM website, at www.aircominternational.com.

2 Click the link to Support.

3 Log in, using your customer web account username and password.

4 In the Technical Support pane, click Online Helpdesk System.

5 Click Log New.

6 Enter the details of your request, and then click Log.


Contacting us via Telephone or Email

If you wish to contact us directly, here are the contact details of our regional offices:

Location Regional Office Contact Details

Europe United Kingdom Tel : +44 (0) 01932 442345 Fax :+44 (0) 01932 442005

[email protected]

Sweden [email protected]

France [email protected]

Italy [email protected]

Germany [email protected]

Belgium [email protected]

Middle East, Africa and Central Asia United Arab Emirates Tel : +971 4 391 2642 Fax :+971 4 391 8660

[email protected]

South Africa Tel : +27 11 3243600 Fax : +27 11 7848027

[email protected]

Americas Mexico [email protected]

USA Tel : +1 866 207 8083 Fax : +1 214 360 7241

[email protected]

Brazil Tel : +55 12 3941-2199 Fax : +55 12 3911-3727

[email protected]

Asia and Oceania Australia [email protected]

Singapore [email protected]

China [email protected]

Taiwan [email protected]

India [email protected]

When contacting us with a support query, it would help us if you:

Give us as much information as possible about the problem and the context in which it occurred

State the version and build you are using

Have all the details of your query to hand

Are logged into the ENTERPRISE application

Can send extracts of your data sets if we need them to reproduce your problem


Obtaining Further Information and Services

As well as comprehensive online Help and User Reference Guides and dedicated Product Support, AIRCOM additionally provides:

Online Knowledgebase of Articles

If you register for a customer web account, you can view our searchable technical database in the Product Support section of the AIRCOM website. This Knowledgebase contains articles created by our support professionals who have resolved issues for our customers, and is constantly updated, expanded, and refined to ensure that you have access to the very latest information.

Online Technical Forum

You can obtain useful information from our online problem-solving technical forum.

The URL address is: http://www2.aircom.co.uk/techforum

If you would like permission to access to this resource, please email the support team at the address described in Obtaining Support on page 19.

Power Tools

If you register for a customer web account, you can download from a selection of useful power tools, such as file conversion utilities.

Latest Copies of the User Reference Guides

If you register for a customer web account, you can download the latest User Reference Guides (PDFs) from our website. If you do this, please check the back of the reference guides for any additions or corrections.

Consultancy Services

AIRCOM also provide full radio consultancy services in Network Audits, Business Planning Support, Licence Applications, Radio Network Planning, Telecommunications Research and System Modelling and Propagation Analysis and Modelling.

Training

There is a wide variety of courses run by AIRCOM. These courses range from tool training to technology training. For details, contact Competence Development Solutions ([email protected]).



Getting Started using the RANOPT Administrator

You can use the RANOPT Administrator to perform a variety of tasks, for example:

Load vendor-specific W-CDMA scanners and user equipment file formats. These file formats are known as equipments, for example Agilent, Anritsu, Nemo and NEC.

Configure some of the equipments.

Create an equipment template to cater for variations in file formats.

This picture shows an example of the options available on the RANOPT Administrator toolbar when you are logged into RANOPT Administrator:

RANOPT Administrator toolbar

Opening RANOPT Administrator

To open RANOPT Administrator:

From the Start button, point to Programs, AIRCOM International, ENTERPRISE 6.1, Misc, then click RANOPT Administrator.

C H A P T E R 2


In This Section

Logging in to a Database 24 Choosing the Database for Loading Data 25 Configuring a Message Log 26 Creating and Modifying Equipment 27 Creating and Modifying Template Strings 31 Creating and Modifying Network Operators 33 Creating and Modifying Data Manipulation Techniques 37 Configuring the Layer 3 Messages Colours 42 Upgrading Reports 43 Upgrading the RANOPT Database 44 Creating and Upgrading Databases Using the Installation Wizard 45 Managing Groups and Users 47 Registering Search Strings 52 About Message Logs 54 Using Multiple Tablespaces In RANOPT 55

Logging in to a Database

To log in to a database in RANOPT:

1 Open the RANOPT Administrator.

The RANOPT Administrator Login dialog box appears:

2 If you do not have a RANOPT database, select the Create New Database for RANOPT option.

- or -

To log into an existing database, select the Log into existing RANOPT database option and choose the database from the drop-down list.

3 Type the username and password (which must have administrative permissions for the selected database).

4 Click OK.


If you selected New Database, the Installation Wizard appears.

- or -

If you are logging into an existing database, the RANOPT Administrator opens.

The name of the RANOPT database and username appear in the titlebar. This picture shows an example:

Choosing the Database for Loading Data

To choose the database that you will be using for loading data, and test the validity of your connection:

1 On the RANOPT Administrator toolbar, click the Configure Parser/Loader button

.

- or -

From the Configure Menu, click Parser/Loader.

This picture shows an example of the User Details pane, and the other Parser/Loader settings:


2 In the User Details pane, type your username and password.

3 Select a database, which should be the data source name that was created when the ODBC connection for the database was configured. This defines the location for your data loader files.

4 To verify the database connection, click Test.

5 To save the details, click Commit.

If the message indicates that your connection is valid, then you are ready to receive and load files correctly.

6 This table describes how to start, stop, pause and restart the Parser/Loader Service:

Click To Status

Start the Parser/Loader Service

Stop the Parser/Loader Service

Pause the Parser/Loader Service

Restart the Parser/Loader Service

7 You can now configure a message log.

Configuring a Message Log

After you have chosen the database for loading data, you must set up a message log so that if any problems occur during data loading, you can check the log for details.

To configure a message log:

1 On the RANOPT Administrator toolbar, click the Configure Parser/Loader button

.

- or -

From the Configure Menu, select Parser/Loader.

2 In the Message Log Settings pane, click the Search button and browse to an appropriate location for your message log.

- or -

Type the full path and name of the file you wish to use.

You can enter the name of an existing message log file, or a new name.

3 Type a maximum size for the log file in megabytes.

4 Click Commit.

5 If you chose an existing file, click Clear Log.

Now you are ready to create equipment.


Creating and Modifying Equipment

Equipments are used to control the extraction of information from data files. They ensure that data files have a valid file extension, contain valid information, have a valid format and are collected from a valid source.

If you are not experienced at creating and modifying equipments, it is recommended that you do not make any changes. Incorrect editing could cause errors during the loading of data files.

Before creating the equipment, it is important to set the global location.

How Data for Equipment is Converted into Files

An equipment or device is defined as a physical phone. When RANOPT loads the data that is captured using a drive test tool, it is split into files in the database according to the equipment used in the drive test.

For example: If two phones are connected to a drive test tool, Tems, the results of the files will be stored in one file. The results for phone 1 and phone 2 will be stored in the same file. During the loading of these files into RANOPT, the results for phone 1 and phone 2 will be split into two separate files.

For Nemo equipment, the data for each equipment/device is automatically split into separate files. However, the data for more than one network may still be contained in that file.

Setting up the Global File Location

When you create equipment, you must specify the global file location, which consists of a home directory (and possibly a shared directory) for all equipment.

This picture shows an example:

Home and Shared directories


To set up the file locations:

1 On the RANOPT Administrator toolbar, click the Equipment button .

- or -

From the Configure Menu, select Equipment.

2 In the Home Directory box, type a path where you want to store all loaded files.

- or -

Use the Search button to browse to a suitable location then click OK.

3 If you need to share files with other users across a network, in the Shared Directory box, type in a path where you want to store all loaded files.

– or –

Use the Search button to browse to a suitable location then click OK.

Creating New Equipment

The equipment that you define in the RANOPT Administrator is the equipment used during the drive test. It contains the required settings to:

Recognise the drive test file

Indicate how the RANOPT loaders should interpret the results file when loading it into the database

To create an equipment:


- or -


2 Click the Create a New Equipment button .

3 In the Name box, type a name for your equipment.

4 From the Decoder Keyword drop-down list, select a suitable decoder keyword.

You can use the same decoder keyword for more than one equipment.

5 If you are creating TEMS equipment, select the version number.

6 In the File Extension box, type an appropriate file extension.

The file extension should be consistent with any template strings you wish to use. For information about template strings, see Creating and Modifying Template Strings on page 31.

7 Create a template string, which will be used to extract information from a data file.

8 Click Commit.


The new equipment is now available in the left-hand pane of the Equipment dialog box. This picture shows an example:

The list of equipments can also be viewed in Windows Explorer in the location you specified in the Home Directory text box. This picture shows an example:

Each equipment displays all of the networks (created in the New Networks dialog box) beneath it. Additionally, under each network type, RANOPT creates three subfolders (Err, In and Out), which are used as follows:

When a file is chosen for loading, it will be moved to the In folder

If the file is loaded successfully, it is moved to the Out folder

If there are problems loading the file, it is moved to the Err folder


Appropriate File Extensions

When you are specifying file extensions for equipment and network operators, you can use wildcard characters. They are described in this table:

Wildcard Character Description Example

* String of characters d* = ds1, ds2, ds3 and all strings starting with "d".

? Single character ds? = ds1,ds2 and all strings starting with "ds" and ending in any ONE character.

Previously two separate equipments had to be created for files that had different extensions. This is no longer necessary with the introduction of the wildcard character. For example, ds? will include files ds1, ds2 and ds3.

Modifying and Deleting Equipment

If you have appropriate administrator permissions, you can modify and delete existing equipment.

To modify an equipment:

1 From the Available Equipment pane, select an equipment and click the Modify

Equipment button .

2 Make the required changes and click Commit.

To delete an equipment:

1 From the Available Equipment pane, select an equipment.

2 Click the Delete an Equipment button .

3 In the dialog box that appears:

To delete the equipment type only (and not the associated directories and files), select 'Don't delete the import directories'.

- or -

To delete the equipment type, directories and files associated with the equipment, select 'Delete all directories associated with the import source (including files)'.

- or -

To delete the equipment type and directories associated with the equipment, but not the files associated with the equipment, select 'Delete all directories associated with the import source (excluding files)' .

You must specify a directory where you can move the associated files to.


Creating and Modifying Template Strings

Template strings are used to extract the specific information that you want to import into your database from a data file. Each template string can be configured for an individual file or group of files.

You can create a template string in two ways using the RANOPT Administrator:

Using a text editor and the template string Creation Wizard.

- or -

Manually.

You should only use the manual method if you are very experienced at creating template strings.

Creating a Template String using a Text Editor and Wizard

To create a template string using a text editor and the Template String Wizard in RANOPT Administrator:

1 Open a text editor, for example Notepad, and type an appropriate template string.

For example:

2 Save the file, using an appropriate file extension.

The file extension of your template string must correspond to the file extension specified for the equipment that you want to use.


- or -


4 In the Available Equipment pane, select the equipment that will use your template

string and click the Edit an Equipment button .

5 In the Template String Pane, click Wizard.

6 In the dialog box that appears, browse to the template string file you have created and click Open.

7 In the dialog box that appears, click Next.

8 Define the structure of the text file:

In the Choose the File Delimiter pane, select a suitable file delimiter.


In the Header Information pane, if your file contains a header, select Contains Header. From the Import from row choose a row to import.

In the Text Information pane, from the Text Qualifier menu, select a text qualifier.

9 In the Preview pane, type in a template string.

10 Click Next and to define the nth scrambling codes and corresponding parameters, select a scrambling code (denoted by colour), and drag it onto the grid.


11 Click Next and assign a column in your data file to a column in your database.

12 In the File Data list, select an appropriate data element.

13 In the Database Fields list, select a column corresponding to your file data element.

14 Click Link.


15 Click Next, and in the Time Format pane, choose a time format.


16 In the Date format pane, set the required date format:

In the Date and Time in One Field pane, select a preferred date and time format.

In the Separator between Date and Time, select a suitable separator.

17 Click Next.

18 Click Finish.

Creating a Template String Manually

To create a template string manually in RANOPT Administrator:


- or -

From the Configure menu, select Equipment.

2 In the Template String pane, type in the template string.

This picture shows an example of a template string for the equipment type Anritsu:

3 Click Commit.

Creating and Modifying Network Operators

Network operators provide network details for imported data, and consist of:

Network name

Network code

Technology type

If you are not experienced at creating and modifying network operators, it is recommended that you do not make any changes. Incorrect editing could cause errors during the loading of data files.


Creating a Network Operator

To create a network operator:

1 On the RANOPT Administrator toolbar, click the Configure Network Operators

button .

- or -

From the Configure Menu, select Network Operators.

2 Click the Create a new Network button .

3 If you want to use automatic network detection, select the Enable Automatic Detection option:

When Enable Automatic Network Detection is not selected, RANOPT will not split the files per network. The whole file will be loaded and will be associated with the network chosen when submitted.

4 In the Network Name and Network Code boxes, type a name and a code for your network. The network code uniquely identifies the available network.

5 In the list of technology types, select the appropriate technology (or technologies) for your network.

6 If you have enabled automatic network detection, add the appropriate frequencies for the technologies by clicking the Add button.

7 If you are configuring a network operator for use with Nemo files, select the Use File Extension checkbox, then type in an appropriate file extension for the Network.

If you are using Nemo files, you can specify a different file extension for each network. When you load the files, the file extension is checked and the file will be automatically loaded into the network assigned for that extension. For example, for Network A, you might always record the files with extension, .dt1 and for Network B with extension .dt2. If you set the file extensions up for each network, then RANOPT will automatically load dt1 files as Network A files and dt2 files as Network B files whichever network directory you put them into.


8 Click Commit.

This network operator will be available when creating filters in RANOPT. This picture shows an example of an available network:

Setting up Automatic Network Detection

Automatic network detection is a method used to load the files regardless of the equipment type or network.

Files are submitted into the configured 'home' or 'shared' directories under Import Sources.

To enable automatic network detection,

This feature currently only works for Nemo User Equipment, Nemo Scanner, SD5 and Tems files.

Files containing multiple devices (equipments), such as Tems and/or Agilent SD5, are split up into separate files, even if Automatic Network Detection is switched off.


How Data for Networks is Converted into Files

Scanner equipment can scan the entire frequency range (for GSM) or several carriers (for W-CDMA), but it does not have the intelligence to determine the specific networks that are being scanned.

Scanner data is loaded into RANOPT and if Automatic Network Selection is enabled, the data will be divided into as many files as there are networks contained in the original scanner data.

For example: Country X has two GSM networks, NetworkA and NetworkB, utilising the 900Mhz band. This band is divided up into channels running from 1 to 124. The channels are allocated between the two networks as follows: NetworkA - Channels 1 to 60, with channel 61 as a guard channel to separate the networks NetworkB - Channels 62 to 123, with channel 124 as a guard channel to separate the networks The scanner will scan the entire range from 1 to 124 and take measurements, and store the values into a file, <file_name>.ds1.

If two scanners are used, one scanner will save its results in <file_name>.ds1 and the other will save the data into <file_name>.ds2. The file name for each file containing the scanner data will be identical but the file extension will be different. If you have created three network operators in RANOPT Administrator corresponding to Network A, Network B and the guard channels, and selected automatic network detection, RANOPT will process the measurement data in <file_name>.ds1 as follows:

1. The measurement data from channels 1 to 60 will be split into a separate file with the network name appended to it (in this example, NetworkA <file_name>.ds1).

2. The measurement data from channels 62 to 123 will be split into a separate file with the network name appended to it (in this example, NetworkB <file_name>.ds1).

3. The measurement data from channels 61 and 124 will be split into a separate file for the guard bands.

Modifying and Deleting Network Operators

If you have the appropriate administrator permissions, you can modify and delete existing network operators.

To edit a network operator:

1 From the Network Operators pane, select the required network and click the

Modify Network button .

2 Make the required changes, and click Commit.

To delete a network operator:

1 From the Available Networks pane, select the network operator that you want to remove.

2 Click the Delete Network button .


Creating and Modifying Data Manipulation Techniques

In RANOPT, when you create a filter, you can choose to use a data manipulation technique, in order to normalise the raw data from the drive test file. For example, a data manipulation technique can ensure that the number of data samples or each scrambling code in the filtered result set is constant. This will mean that the statistical analysis in comparing the results from each scrambling code is fair and does not unnecessarily bias one scrambling code over the other.

It is advisable to apply normalisation to filters used for statistical reporting only (and not for replay purposes).

You can create, modify or delete data manipulation techniques.

Do not make any changes unless you are experienced at data manipulation techniques. Incorrect editing could cause errors during the loading of data files.

Creating a Data Manipulation Technique

To create a data manipulation technique:

1 On the RANOPT Administrator toolbar, click the Data Manipulation Techniques

button .

- or -

From the Configure Menu, select Data Manipulation Techniques.

2 Click the New Data Manipulation Technique button .

3 In the Name box, type a descriptive name for your data manipulation technique.

4 From the drop-down list, select the procedure type for this technique.

There are a number of binning (Java) procedure types installed into RANOPT by default. For more information, see About Data Manipulation Techniques - Binning on page 38.

5 From the drop-down list, select the data type(s) that this technique will be used for - Scanner, Test Mobile or Scanner and Test Mobile.

6 In the Description box, type in a description for the technique.

7 Data manipulation techniques are defined according to a specific parameter, for example, a default bin size of 50m.

In the Name box, type a name for the parameter that will be used to define the technique

In the Units box, type the unit of measurement corresponding to the parameter

In the Default Value box, type the numeric default value for the parameter

8 Click Commit.


This picture shows an example of a Data Manipulation Technique:

About Data Manipulation Techniques - Binning

Binning is a way of manipulating raw data from a drive test file to make it more usable in RANOPT. It can be used to normalise the drive test data.

There are three types of binning that are automatically installed as Java procedures in RANOPT:

Distance Binning

Time Binning

Grid Binning


Distance Binning

Distance binning works as follows:

1 The drive route is divided into segments or 'bins' of a defined size, for example 50m.

2 Within each 50m bin, all of the the measurements contained within that segment are combined and placed at the midpoint (in terms of latitude and longitude) between the start and end of that bin.

3 If the route passes multiple times through the same segment then each pass through is considered as a different bin, and the route direction is retained in each bin.

This picture shows an example of distance binning:

Example of distance binning

In this example, the drive test route has been divided into 50m bins. The data within each bin is combined, and placed at the geographical mid-point of the bin indicated by the green point.


Time Binning

Time binning works as follows:

1 The drive route is divided into segments or 'bins' of a defined size, for example 10 seconds.

2 Within each 10-second bin, all of the the measurements contained within that segment are combined and placed at the midpoint (in terms of latitude and longitude) between the start and end of that bin.

Because it combines data based on its timestamp, time binning should not be used for data that will be used for cluster analysis of a large area containing multiple routes.

3 If the route passes multiple times through the same segment then each pass through is considered as a different bin, and the route direction is retained in each bin.

This picture shows an example of time binning:

Example of distance/time binning

In this example, the drive test route has been divided into 10-second bins. The data within each bin is combined, and placed at the geographical mid-point of the bin indicated by the green point.


Grid Binning

Grid binning works as follows:

1 Grid binning places an imaginary grid over the drive test, where each square or 'bin' is a defined size (for example 50m x 50m).

2 Within each 50mx50m bin, all of the the measurements are combined and placed at the centre point (in terms of latitude and longitude) of the bin.

3 If the route passes multiple times through the same square then all of passes through are combined in the same bin, and the route direction is disregarded.

Because it does not retain the route direction, grid binning should not be used for data that will be used for handover analysis.

This picture shows the process of Grid Binning:

Example of grid binning

Modifying and Deleting Data Manipulation Techniques

If you have appropriate administrator permissions, you can modify and delete existing data manipulation techniques.

To modify a technique:

1 From the Manipulation Techniques pane, select the required technique and click

the Modify Data Manipulation Technique button .

2 Make the required changes, and click Commit.

To delete a data manipulation technique:

From the Manipulation Techniques pane, select the required technique and click

the Delete a Data Manipulation Technique button .


Configuring the Layer 3 Messages Colours

If you have appropriate administrator permissions, you can use the RANOPT Administrator to configure the colours of the Layer 3 messages in the RANOPT database.

To configure the Layer 3 message colours:

1 On the RANOPT Administrator toolbar, click the Configure Layer 3 Message

Colours button .

- or -

From the Configure Menu, select Layer 3 Message Colours.

2 To change the default colour of a selected layer 3 message:

Double-click the message and select a desired colour.

Click OK.

This saves the colour format for the network messages as the default for all users.

This picture shows an example of the Configure Layer 3 Messages window:


Upgrading Reports

You can use the RANOPT Administrator to upgrade the reports in the Report Registry:

1 On the RANOPT Administrator toolbar, click the Upgrade Reports button .

- or -

From the Tools Menu, select Upgrade Reports.

2 In the dialog box that appears, click the Browse button to locate the directory into which the upgraded reports will be placed, and then click Close.

3 In the left-hand pane, select the checkboxes for all of the reports that you want to upgrade.

4 Click OK to upgrade the selected reports.

Click each tab to move between each type of report.

To view the Legend which describes the colour coding of the reports, from the View Menu, select Legend.

This picture shows an example of the Upgrade Reports dialog box:

There are three tabs on the Upgrade Reports dialog box:

This tab Contains

Parameters A list of the parameters that are available for view/analysis.

Reports The library of MS Excel reports provided by AIRCOM International.

Modules The pre-configured analysis modules useful for analysis that are provided as a default.


Upgrading the RANOPT Database

You can use the RANOPT Administrator to upgrade the RANOPT database.

Do not make any changes unless you are experienced at upgrading the database.

To upgrade the RANOPT database:

1 On the RANOPT Administrator toolbar, click the Upgrade Database button .

- or -

From the Tools Menu, select Upgrade Database.

The Upgrade Database dialog box appears. The current version of the database appears in this window as well as the schema name. This picture shows an example:

2 Select the checkbox next to the Database to upgrade the database.

3 Select the checkbox next to the Network Messages to upgrade the network messages

4 If you want the upgrade to continue even if non-fatal errors are found during the process, select the Continue On Non-fatal Errors option.

5 Click OK to upgrade.

If the upgrade RANOPT script file is found, the latest database dump that has been imported will be updated to the latest version.

If the script file cannot be found automatically, you will be prompted to find the script file.

The progress of the upgrading is displayed.

If any errors occur during the upgrade, they are logged in the progress window. To view an error in a separate window, double-click the error message.


Creating and Upgrading Databases Using the Installation Wizard

You can use the RANOPT Installation Wizard to:

Create a new database.

- or -

Upgrade an existing database.

Ensure that you select to upgrade both the database and the network messages.

The Installation Wizard also creates:

The public synonyms for all the tables, procedures, functions, triggers and sequences

The necessary roles in the system and grants the required privileges for each role

The database link to the Planning/Cell Site database (if required)

You can create a new database after you have already logged into an existing database in the RANOPT Administrator. To create a new database, on the RANOPT Administrator toolbar, from the Tools Menu, select Install Database.

To create or upgrade an existing database using the Installation Wizard:

1 Open the RANOPT Administrator.

2 Select New Database and click OK.

The Installation Wizard opens.


3 Use this table to help you with the installation:

On this page You should

Welcome Click Next. This page contains information describing what the installation wizard can do.

Database Create a new database or use an existing database instance.

If you have purchased RANOPT Lite, it is recommended that you use an existing ASSET database instance.

To create a new database:

- Type a database name, for example, 'RANOPT'.

- Type a default tablespace name, for example, 'RANOPTD'.

- Type an index tablespace name, for example, 'RANOPTI'.

- Type a temporary tablespace name, for example, 'RANOPTT'.

- Select the memory for the database, 512MB or 1GB.

- Click the Next button and the next screen will be displayed.

To use an existing database instance:

- Type a database name, for example, 'RANOPT'.

- Type the ORACLE SYS password, for example, 'sys'.

- Click the Next button and the SYS password will automatically be verified. If the password is valid, the SYS user will be logged in and the next screen will be displayed.

Administrator User Details

- Type a user name for the administrator user.

- Type a password, for example, 'RANOPT'.

- Type the password again, for example, 'RANOPT'.

- Click the Next button.

Notes :

The administrator user is also the schema owner. If a new administrator user is created, then old administrator user in the database will remain in the database but will be ignored. If an administrator user already exists with the same name, the user will be prompted to overwrite the existing administrator user. The Default and Temporary tablespace lists will list the already available tablespaces in the database.

If the "Ignore Errors" option is selected, non-critical errors that occur during the installation process will not cause a message box to pop up requiring user interaction. These errors will still be logged in the message log.

Planning/Site Database Link

- Select Create Link to Planning/Site Database.

- Type in a Link Name, for example, 'RT_DB_LINK'.

- Type in the User name of the previously created user, for example, 'link'.

- Type in the Password, for example, 'link'.

- Select the ENTERPRISE Database from the list, for example, 'ent5'.

- Click Finish for the database creation to start.

Notes :

The current database must be on the local machine to be able to create a database link to another database (the Planning/Site database). If the current database is not on the local machine, the page will be disabled and the user will not be able to create the database link to the Planning/Site database.

If a database link cannot be created, please refer to the document, S-PS-003-WP-01 Setting up an ORACLE Database Link - Issue5.5.doc or contact AIRCOM Product Support.


On this page You should

Progress - Click Stop to stop the Installation Progress.

This page indicates the progress and logs every operation being performed and any errors that occur during the installation process.

If prompted with an error similar to: "The specified operator doesn't exist" then click ignore.

Database Configuration Assistant

- Enter the sys and system username and password in the corresponding fields as you did previously for the ENTERPRISE database.

- Click Close to finish the database creation

Please Supply sys password

- Enter the sys password configured in the previous step and click OK.

Installation wizard (Installation Progress)

- When the installation/upgrade is finished, Click close to finish.

This page indicates the progress and logs every operation needed to populate and upgrade the database with the latest settings required.

The Next and Back buttons allow the user to navigate through the wizard.

Managing Groups and Users

You can use the RANOPT Administrator to create groups and users, which are described in this table:

Item Description

Group A group is a collection of users that have specific permissions in RANOPT.

For example, you can create a group with access permissions only. All users belonging to this group can only open RANOPT - they cannot create or edit anything.

User A separate user must be created for each person wanting to use RANOPT. Each user is created with a user name and password and will be given permissions according to the group(s) that they belong to.

To create groups and users:

On the RANOPT Administrator toolbar, click the Manage Users button .

- or -

From the Tools Menu, select Manage Users.

The Manage Users dialog box appears. In this dialog box, you can:

Create and modify groups

Create and modify users


Creating Groups

In the RANOPT Administrator, you can create groups.

By default, an Administrator group is created, and is available when you create a new user. Users assigned to this group will have full access to the system, and can:

Create, modify and delete other users

Create, modify and delete groups

Create, modify and delete equipments

Create, modify and delete networks

Create, modify and delete data manipulation techniques

Configure Layer 3 Message colouring

Register tablespaces

Upgrade reports (Excel, 2D View, Replay, Chart)

Upgrade the database (only if they are the schema owner)

To create a new group:

1 In the Manage Users dialog box, click the Groups heading and then click the

Create Group button .

2 In the Name box, type a name for the group.

Make this as descriptive as possible, based on the permissions the group will have - for example, if a group has Reporting permissions, you could name it 'Reporting'.

3 In the Description box, type a description.

4 In the Permissions pane, select the task-based permissions that you want members of this group to have.

These permissions are described in the following table:

Permission Name Users Given This Permission Will Be Able To:

Chart View Access Access the Chart View window.

View available charts and graphs.

Database Explorer Access Launch the Database Explorer.

View files loaded in the database.

View file loading progress.

Database Explorer Maintenance Delete files from the database.

Filter Manager Access Access the Filter Manager window and view the available Private and Public filters.

Create, modify, delete and apply Private filters.

Geo-mapping Access the Geo-mapping window.

Perform geo-mapping on available data.

Loading Use the File Submit Wizard to submit files.

Use the File Submit Wizard to load the results into the database.


Map Offset Manager Access Access the Map Offset Manager.

Public Filter Maintenance Create, modify, delete and apply Public filters.

Report Registry Access Access the Report Registry window.

View available Excel, 2D View SQL, Replay SQL and Chart SQL modules.

Report Registry Maintenance Create, Modify, Delete, Import and Export Excel, 2D View, Replay and Chart modules.

Reporting Execute Excel reports.

Rules Editor Access Access the Rules Editor window.

View the available exclusion rules.

Rules Editor Maintenance Create, modify and delete exclusion rules.

Snapshot Manager Access Access the Snapshot Manager window.

View the data associated with available snapshots.

Snapshot Manager Maintenance Create, modify and delete snapshots.

Some permissions have dependencies - for example, a user must have access to the Report Registry to be able to maintain it. In these cases, the required permission will be automatically selected.

5 Click OK.

This picture shows an example group:


Modifying and Deleting Groups

If you have the appropriate administrator permissions, you can modify and delete existing groups.

To modify a group:

1 In the Manage Users dialog box, click the Groups heading.

2 Select the required group, and click the Modify Group button .

3 Edit the group as required.

4 Click OK to commit the changes.

To delete a group:

1 In the Manage Users dialog box, click the Groups heading.

2 Select the required group, and click the Delete Group button .

3 In the dialog box that appears, click Yes to confirm the deletion.

Creating Users

To create a user:

1 In the Manage Users dialog box, click the Users heading and then click the Create

User button . A new user is added.

2 In the Username box, type a name for your user.

3 In the Password box, type a password.

4 In the Confirm Password box, type the same password.

5 In the Description box, type a description.

6 In the Groups pane, select at least one group in which to include the new user.

7 Select a tablespace from the Temporary Tablespace box.

8 In the Quota box, specify the schema size that you want to allocate to this user. This should be equal to or greater than 20MB.

Typically, the administrator should allocate each user a specific quota for their schema depending on the disk space available for all users. The schema contains processed data which could be used to display events onto the Map View or used as part of the report generation process, as well as tables from some Excel reports.

If a user reaches the limit of their allocated quota, then the user and administrator will be warned that the disk space is running out. The administrator can take appropriate measures, such as increasing the disk space or helping the user to reduce the reports or filters that are being used.

The tuning tools in Oracle Enterprise Manager can give the database administrator an indication of how much space should be allocated to each user and will this aid in setting up the quota sizes.


9 To restrict the filters that a user can create:

Select the Set Filter Limit option.

In the Filter Quota box, type in a value equal to or greater than 20MB.

The restriction is a limit on the total size of all filters created. If the filter quota is 500MB this may be used by 25 small filters or only 10 larger filters. The recommended filter quota depends on the amount of database storage available and the number of users.

You have configured the new user. This picture shows an example:

10 Click OK.


Modifying and Deleting Users

If you have the appropriate administrator permissions, you can modify and delete existing users.

To modify a user:

1 In the Manage Users dialog box, click the Users heading.

2 Select the required user and click the Modify User button .

3 Edit the user as required.

4 Click OK to commit the changes.

To delete a user:

1 In the Manage Users window, click the Users heading.

2 Select the required user and click the Delete User button .


Registering Search Strings

The drive test files that are loaded in RANOPT include file comments, which you can filter on.

However, the file headers are sometimes different to the headers that the Filter Manager expects, so using the RANOPT Administrator, you must add the spelling of the header that you want to search for and then add as many search strings for the field as required.

To make a search string available in the Filter Manager, you must first register it in the RANOPT Administrator.

To register search strings:

1 On the RANOPT Administrator toolbar, click the Register Search Strings button

.

In the dialog box that appears, there are a number of tabs corresponding to comment types:

Call Type

Call Window

Call Duration

Antenna Name

Phone/Equip Type



2 For each tab:

Define a Field Identifying Label, which is the header that you want to search for

Add search strings, by clicking the Add button, typing the search string in the dialog box that appears, and then clicking Apply

The text for the Field Identifying Label must be identical to the text contained in the drive test file and must include all punctuation. This is an example of an extract of comments within a drive test file:

For example, for Antenna Name, the Field Identifying Label could be 'Antena Name:', and typical search strings could be 'Default_Antenna', 'Nokia7600_UMTS_endless_Call' and 'Z105_UMTS_Data'.


About Message Logs

The message log records all errors that occur when loading files into the RANOPT database. If any files fail to load, you can view the Parser/Loader Message Log to diagnose the problem and take corrective action. You can view, search, clear, refresh, load and save message logs.

This picture shows an example of the Message Log window:

Example Message Log

Viewing and Searching Message Logs

To view a message log:

On the RANOPT Administrator toolbar, click the Open Parser/Loader Message

Log button .

- or -

From the View Menu, select Parser/Loader Message Log.

Message Log information is displayed.

To search for a message log:

1 In the Message Log window, click the Search Message Log button .

2 Type the text that you want to search for in a message log and click OK.

If the text exists in the file, the text will be highlighted in the Message Log.


Clearing and Refreshing Message Logs

To clear a message log:

1 In the Message Log window, click the Clear Message Log button .

2 In the dialog box that appears, click Yes if you want to back up your file before clearing it or No if you do not want to do this.

If you want to keep a record of your message log, it is recommended that you back your file up.

3 If you choose to back up your file, browse to a suitable location and click Save.

The message log is cleared.

To refresh a message log:

In the Message Log window, click the Refresh Message Log button .

Saving and Loading Message Logs

To save a message log:

1 In the Message Log window, click the Save Message Log button .

2 In the dialog box that appears, browse to a suitable location and click Save.

To load a message log:

1 In the Message Log window, click the Load Message Log button .

2 In the dialog box that appears, browse to the location of your message log and click Open.

The selected file is displayed in the Message Log window.

Using Multiple Tablespaces In RANOPT

User input and output requests can decrease the speed and access time for multiple users on a system with one hard disk. This is because each user will have to wait for the other users to complete a read or write request on the hard disk.

These waits can create a significant delay when there are multiple transactions.

The solution is to add additional hard disks, each with a tablespace created on it. The read and write requests can be split across the tablespaces and the requests can be handled in parallel.

RANOPT needs to be told where these tablespaces exist and hence these tablespaces need to be registered in RANOPT.

By default, the tablespace, RANOPTD is added.

If any additional tablespaces need to be created, they can be registered using the

Register Tablespaces button .


Registering Tablespaces

To register tablespaces in RANOPT:

1 On the RANOPT Administrator toolbar, click the Register Tablespaces button .

- or -

From the Configure Menu, select Registered Tablespaces.

2 Use the table shown here and:

Click To

Add a tablespace

Delete a tablespace

Move the tablespace up

Move the tablespace down


Using the RANOPT User Interface

To start using RANOPT within ENTERPRISE:

1 Start ENTERPRISE and log into the ENTERPRISE database in the usual way.

2 Click the RANOPT tab.

3 Click the RANOPT login button .

- or –

From the Options menu, click RANOPT Login.

4 In the Database Login dialog box, select the required database.

5 Type a user Id and password, and then click the Login button:

RANOPT opens.

C H A P T E R 3


In This Section

About the Evolution of the RANOPT User Interface 58 About the RANOPT Main Toolbar 59 About the RANOPT Administrator 60 About the RANOPT Tools Menu 61 About the RANOPT Replay Menu 68 About the RANOPT Analysis Menu 69 About the Speed Control 72 About Replay Positioning 73

About the Evolution of the RANOPT User Interface

Each engineer has their own way of analysing drive test results and requires a flexible software tool to help them, one which complements their processes and workflow and does not add extra constraints to their normal way of working. RANOPT has evolved to meet these requirements.

Early Versions of RANOPT

In earlier versions of RANOPT, engineers could use existing modules or request new ones, which resulted in a long list of available modules, trying to support all possible ways of looking at measurements and trying to satisfy all requests.

With a typical engineer working with only one or two modules at most at any given time, the large list of modules wasted space and was confusing. It also meant that every time an engineer wanted a new module they would have to ask AIRCOM International to create it for them.

To solve this problem, RANOPT was modified from being module-driven to being parameter-driven.

RANOPT Now

In the current, parameter-driven version of RANOPT:

You can design your own windows, giving you full control over which parameters should be displayed and how they should be displayed.

The concept of workspaces has been introduced. A workspace contains a small number of filters (up to a maximum of ten), and can be used instead of the Filter Manager, which may contain hundreds of filters.

The old and limited Time Navigator is replaced with an automatic replay concept. This is because the concept of workspaces and the parameter-driven nature of RANOPT have created an environment in which any filter in the workspace is part of replay.


About the RANOPT Main Toolbar

You can access the main functionality of RANOPT either from the Tools menu or from the main toolbar, shown here:

RANOPT Toolbar

The ENTERPRISE Toolbar includes the RANOPT Replay buttons and associated icons and textual information as shown here.

RANOPT Replay Buttons

The ENTERPRISE Toolbar also has a text bar that has been added. This describes the number of filters currently loaded into the workspace as well as the name of two of the files contained in the filters and the date and time of the current position in the file.

Example Text Bar


About the RANOPT Administrator

The RANOPT Administrator enables you to configure and manage:

Equipment file formats

Networks

Users

Groups

You can also create a RANOPT database.

This picture shows an example of the RANOPT Administrator:

Example RANOPT Administrator


About the RANOPT Tools Menu

Use the Tools Menu to access the:

Workspace

Filter Manager

File Load Wizard

Chart View

Report Registry

Snapshot Manager

Rules Manager

Database/DB File Explorer

About the RANOPT Workspace

The workspace is a module that contains up to ten filters that you may be working with at any time. Only three filters may be made active. Any filter in the workspace is part of replay.

This picture shows an example RANOPT workspace:

Example RANOPT workspace

For more information, see Using the Workspace on page 237.


About the RANOPT Filter Manager

The Filter Manager dialog box enables you to configure and manage your filters, which can be used for analysis and post processing.


Filter Manager dialog box

For more information, see Using the RANOPT Filter Manager on page 133.


About the RANOPT File Load Wizard

The RANOPT File Load Wizard enables drive test files to be loaded into the RANOPT database. It is also used to load data into the database.

This picture shows the File Load Wizard:

File Load Wizard

For more information, see Loading Drive Test Files on page 75.


About the RANOPT Chart View

The Chart View dialog box enables you to view filtered data using Chart Report Definitions:

Chart View dialog box


About the RANOPT Report Registry

Use the Report Registry to:

Create and modify parameters that can be displayed on the Charts, Grids and on the Map View

Create and modify reports that can be used in the Filter Manager


Example RANOPT Report Registry

For more information, see Using the Report Registry on page 85.


About the Snapshot Manager

Use the Snapshot Manager to make a copy of the planned site and cell database and insert this into the RANOPT database for use with the relevant drive data measurements.

This picture shows an example of the Snapshot Manager dialog box:

Snapshot Manager dialog box

For more information, see Creating and Viewing Snapshots on page 164.


About the Rules Manager

You can use the Rules Manager to apply one or more parameter rules to filtered data. Parameter Rules consist of mathematical expressions, which the Rules Manager runs in sequence on filtered data. You can use the Rules Manager to create, modify or a delete a rules set and create, modify and delete rules within the rule set.

This picture shows an example of the Rules Manager:

Rules Manager

For more information, see Creating Parameter Rules on page 159.


About the Database Explorer

The RANOPT Database Explorer enables you to navigate the result files already loaded into the database.

This picture shows the Database Explorer:

RANOPT Database Explorer

For more information, see Using the Database Explorer on page 237.

About the RANOPT Replay Menu

Use the Replay Menu to perform the tasks associated with replaying data:

Play

Stop

Step Back

Step Forward

Jump to Start

Jump to End

Adjust Speed

Set Position

Synchronise reports


About the RANOPT Analysis Menu

Use the Analysis menu to:

View and create charts (line, bar, grid and so on) of replayed data

View UE data using a network message

View the GPS navigation (speed and direction) of a particular filter

View data quality (DQA) messages (for Rohde and Schwarz data mobiles only)

Manage the windows you use in RANOPT

Manage the desktop layouts you use in RANOPT

About the Signalling Messages Window

In the Signalling Messages Window, you can view UE file data for signalling messages.


Signalling Messages Window


About the GPS Navigation Window

In the GPS Navigation window, you can view the navigation (speed and direction) of a particular filter.


Example GPS Navigation Window

About the DQA Messages Window

In the DQA Messages Window, you can view information for Rohde and Schwarz data quality analysis files.


DQA Messages Window


About the Windows Manager

In the RANOPT Windows Manager, you can manage all the windows that are created for Analysis. This picture shows an example:

RANOPT Windows Manager


About the Desktop Manager

In the RANOPT Desktop Manager, you can save the positions of the windows that have been opened by the user in RANOPT. You can access the Desktop Manager from

the Analysis menu or by clicking the Load Default Desktop button .

This picture shows an example of the Desktop Manager:

Example Desktop Manager Dialog Box

About the Speed Control

Select the speed button on the ENTERPRISE Toolbar to open a drop down sliding bar to change the speed at which the loaded file is played. Move the arrow button up to decrease the speed of replay or down to increase the speed of replay.

This picture shows an example Speed Control dialog box:

Speed Control dialog box


About Replay Positioning

Click the Set Position button on the ENTERPRISE toolbar to open a drop down sliding bar indicating the position in the file.

This picture shows an example Replay Positioning dialog box:

Replay Positioning dialog box



Loading Drive Test Files

RANOPT analyses bulk drive test data, which can be loaded into the database by using the file loading process. The process uses settings configured in RANOPT Administrator to load data files from a specified source into your database. Only one RANOPT file loader program needs to run for each database.

When data has been loaded into the database, it can be analysed in RANOPT by many users at one time. For example, from the same database, one user can generate a statistical report, while another can analyse layer 3 information.

In This Section

Resolving of Cell Sites in RANOPT 75 Setting up Loading Data for Analysis 78 Loading Drive Test Data 79 Troubleshooting Data Loading 83

Resolving of Cell Sites in RANOPT

Resolving cell sites for UMTS drive-test files

Cell sites for UMTS data are resolved in the following order:

1 RANOPT attempts to resolve the cell by using the UCID. The cell UCID is a concatenation of the RNCID and CI values as a binary string.

2 If the UCID is not available, RANOPT will attempt to resolve the cell by using its CGI. The cell CGI is constructed by concatenating the MCC, MNC, LAC and CI values.

3 If neither the UCID nor the CGI is available, RANOPT will attempt to resolve the cell by using a combination of CI/MCC/MNC and distance, then CI/UARFCN and distance and finally SC/UARFCN and distance.

C H A P T E R 4


This picture illustrates the process:

Resolving cell sites for UMTS drive-test files process


Resolving cell sites for GSM drive-test files

Cell sites for GSM data are resolved in the following order:

1 RANOPT attempts to resolve the cell by using its CGI. The cell CGI is constructed by concatenating the MCC, MNC, LAC and CI values.

2 If the CGI is not available, RANOPT will attempt to resolve the cell by using a combination of CI/MCC/MNC and distance, then CI/BCCH and distance and finally BCCH/BSIC and distance.

This picture illustrates the process:

Resolving cell sites for GSM handset


Propagating missing UMTS parameters

Missing CI, RNCID, LAC, MCC and MNC values are propagated forward and backward, across measurements with consecutive timestamps that share the same SC.

Propagating missing GSM parameters

Missing CI, LAC, MCC and MNC values are propagated forward and backward, across measurements with consecutive timestamps that share the same BSIC/BCCH.

Setting up Loading Data for Analysis

The file loader processes use RANOPT file parser and loader services to automatically load data into your database from a specified source, such as a directory folder.

Notes :

The loader process loads all recognised files into your database and discards all other data files

If an error occurs while a file is being loaded, the file is moved to the Error_Log folder

In the RANOPT Administrator, you can configure loading settings to define the location, file extension, format (decoder keyword) and the template string of the data files to be imported into your database.

To set up load data for analysis:

1 Ensure you have data files containing the supporting equipments that you want to load.

2 In RANOPT Administrator, configure settings for:

Equipment

Template strings (if required)

Network operators

Data manipulation techniques (if required)

3 Place all of your data files in the location specified in the equipment settings (in the Directory Path boxes).


Loading Drive Test Data

RANOPT enables you to select individual drive test data files to load into your database.

To load data for analysis:

1 In RANOPT, on the RANOPT toolbar, click the File Load Wizard button .

- or -

From the Tools menu, click File Load Wizard.

This launches the File Load Wizard.

2 Click Next.

The Choose the loading method window appears:

3 If Use RANOPT Standard-Load Method is selected then:

From the Network Name menu, select an appropriate network.

From the Equipment menu, select an appropriate equipment.

- or -

If Use RANOPT Automatic Detection Method is selected, then the loader for the file(s) being loaded will automatically be detected.

4 If you wish to share a loading path select the Use 'Shared' path for a distributed installation option.


5 Click Next.

The Choose the files to submit window appears:

6 In the left-hand pane, select the directory containing the drive test data files you wish to load.

7 In the right-hand pane, select the files you wish to load.

8 Click Next.


The Geo-Mapping (Copy Lat/Long) window appears:

9 Click Finish.

The File Load Status Feedback window will be displayed. The status of the file being loaded will be displayed and should any error occur, this appears in the Information message window.


This picture describes each panel on the File Load Status Feedback window:

Click Cancel on the dialog box to cancel the loading of the data files.

10 Click Submit More on the dialog box to continue submitting files or Close to close the File Load Wizard.

11 After the files have been loaded into the "in" directory for the appropriate network, they have not yet been loaded into the database. The files will only be loaded once the Loader service has detected the files. It is possible to view the files being loaded by running the Database Explorer and selecting the Progress Monitor tab.


Troubleshooting Data Loading

If you load files into RANOPT and there is a problem, this table describes the error and what you should do to fix possible problems:

Action Cause Solutions

A file that has been manually loaded is not available in your database.

An incorrect equipment has been used.

Select a different equipment. To do this, in RANOPT, open the File Load Wizard, from the Equipment menu, select an appropriate equipment.

- or -

Edit the equipment you wish to use. To do this, in RANOPT Administrator, in the Equipment window, edit the equipment you wish to use.

- or -

Create a new equipment.

Move the data file from the error folder into the correct folder to be loaded into the database.

- or -

Ensure the data loader service is running.

An error occurs while trying to load a file.

You may have already loaded the file into the database.

Check to see if the file is already present in your database. All files loaded need unique file names.

The file does not seem to load and everything seems fine.

Send the file to AIRCOM Product Support together with a description of where the file comes from (source).



Using the Report Registry

You can use the RANOPT Report Registry to:

Manage parameters

Create charts, maps and grids for parameters, using SQL statements

Manage reports

View reports

This picture shows an example of the Report Registry:

Report Registry dialog box

C H A P T E R 5


To open the Report Registry:

Click the Report Registry Window button .

- or -

From the Tools menu, click Report Registry.

In This Section

Managing Parameters in the Report Registry 86 Creating Charts for Parameters 96 Creating Maps for Parameters 106 Creating Grids for Parameters 113 Adding a Query Variable to an SQL Statement 119 Managing Reports in the Report Registry 121

Managing Parameters in the Report Registry

On the Parameters tab of the RANOPT Report Registry, you can:

Create parameters

Modify parameters

Delete parameters

Copy parameters

Export and import parameters

The parameters are displayed within a tree structure, which is organised according to technology type (W-CDMA, GSM and so on) and equipment type (Handset or Scanner). This picture shows an example of the tree structure:

Report Registry tree structure


Creating Parameters

To create a new parameter in RANOPT:

1 In the Report Registry, select the Parameters Tab.

2 Expand the required technology type, for example W-CDMA or GSM, and then select the required equipment type - Handset, Scanner or Miscellaneous:

3 Right-click, and from the menu that appears, click Create Parameter.

- or -

Click the Create Parameter button .

4 Type a name for the parameter.

5 In the Report Registry, type a description of the parameter.

6 Select the required parameter type. This table describes the options available:

Parameter Type Description

Continuous Range Contains a list of values, each represented by a similar colour to the previous one in the list. This creates a more visual correlation between the displayed colours.

This is particularly useful for values which step from good to bad or from high and low (for example, Ec or RxLevel parameters), because you can graphically display a movement from good to bad or high to low.

Discrete Numeric Range Contains a list of values, each represented by a unique and different colour to the previous one in the list. This creates a more visual difference between the displayed colours.

This is particularly useful for values which are unique in their reference (for example, SC or BCCH), because you are able to spot the difference between the SCs or BCCHs just by looking at the different colours.

Discrete Image List Contains a list of ranges, each represented by a specific bitmap.

7 Define the rest of the parameter, following the appropriate set of instructions:

Defining Continuous Range Parameters on page 88

Defining Discrete Numeric Range Parameters on page 89

Defining Discrete Image List Parameters on page 90


Defining Continuous Range Parameters

If you are creating a parameter and have selected the Continuous Range option, follow these instructions to finish defining the continuous range parameter:

1 Type in the minimum and maximum values of the range.

2 Type in a label/unit value (for example, dB).

3 This table describes what to do next:

Click To

Add Add a value.

In the Add Value dialog box, type the value and select a colour to represent it.

Modify Modify a value.

Edit the value and click OK to save the changes.

Remove Remove a value.

Remove All Remove all previously created values.

Generate Quickly generate a set of values and associated colours.

Select a start colour and an end colour.

Type a value for the step interval. This will be used with the minimum and maximum values to generate the required number of colours.

Click OK.

Copy Style From Use a range/colour set that was set up for another parameter.

In the dialog box that appears, select the parameter containing the required range/colour set and click OK.

4 Click Apply to save the parameter.



Defining Discrete Numeric Range Parameters

If you are creating a parameter and have selected the Discrete Numeric Range option, follow these instructions to finish defining the discrete numeric range parameter:

1 Type in the minimum and maximum values of the range.

2 Type in a label/unit value (for example, dB).


Click To

Add Add a value.









Click OK.






Defining Discrete Image List Parameters

If you are creating a parameter and have selected the Discrete Image List option, follow these instructions to finish defining the discrete image list parameter:

1 Type in a minimum and maximum value.


Click To

Add Add a value.

In the Add Image dialog box:

Type the value.

Type the appropriate unit/label.

Click the Search button to locate the bitmap that you want to associate with the value.

Click Open to associate it.






In the dialog box that appears, select the containing the required range/image set and click OK.




Modifying and Deleting Parameters

In the RANOPT Report Registry, you can modify and delete parameters.

To modify an existing parameter:

1 Click the Parameters tab.

2 In the list of parameters, select the one that you want to edit.

3 Click the Modify button .

- or –

Right-click, and from the menu that appears, click Modify:


4 Edit the parameter as required.

5 Click Apply.

To delete a parameter:


2 In the list of parameters, select the one that you want to edit.

3 Click the Delete button .

- or -

Right-click, and from the menu that appears, click Delete:

4 Click Yes to confirm the deletion.

Copying Parameters

In the RANOPT Report Registry, you can copy existing parameters. This is particularly useful if you want to use the attributes of a particular parameter as the basis for a new one.

To do this:


2 In the list of parameters, select the parameter that you want to copy.

3 Click the Copy button .

- or -

Right-click, and from the menu that appears, click Copy.

4 In the dialog box that appears, select the location for the copy of the parameter.

5 If required, rename the parameter.

6 Click OK.


Exporting Parameters

In the RANOPT Report Registry, you can export parameters from your database, so that they can be imported into other databases.

You can export individual parameters, or export a parameter group.

This section describes exporting individual parameters. For more information on exporting a parameter group, see Exporting a Parameter Group on page 94.

To export a parameter from your database:


2 In the list of parameters, select the parameter that you want to export.

3 Click the Export button .

- or -

Right-click, and from the menu that appears, click Export:

The Export Module dialog box appears:

4 In the Default Directory box, define the default location that you want to export parameters, unless you specify individual paths.

Click the Browse button to quickly locate the required folder.

5 Select the parameter that you want to export:


6 If you want to export the parameter to a directory other than the Default Directory:

Click the Browse button and locate the directory where you would like to save the exported parameter, which is saved as a .mod file.

You can also rename the file if required.

Click Save.

7 Click OK.

The parameter is exported to the required file location.

As well as exporting individual parameters, you can export groups of parameters. For more information on how to do this, see Exporting a Parameter Group on page 94.

Exporting a Parameter Group

In the RANOPT Report Registry, as well as exporting individual parameters you can export a parameter group. A parameter group is a set of parameters grouped under a particular technology type (for example, W-CDMA or HSDPA) or a particular equipment type (for example, Handset).

The parameters are exported as a group, but saved as individual (.mod) files.

To export a parameter group:


2 In the list of parameters, select the parameter group that you want to export.

3 Click the Export Group button .

- or -

Right-click and from the menu that appears, click Export Parameter Group:



4 In the Default Directory box, define the default location that you want to export parameters, unless you specify individual paths.


5 Select the parameters that you want to export:

6 If you want to export any of the parameters to a directory other than the Default Directory:

Click the Browse button for the appropriate parameter, and locate the directory where you would like to save it. (Parameters are saved as .mod files).


Click Save.

7 Click OK.

The parameters are exported to the required file location(s).


Importing Parameters

In the RANOPT Report Registry, you can import parameters that have been exported from other databases.

To import a parameter from another database:


2 Click the Import button .

3 In the dialog box that appears, browse to the .mod file that contains the required parameter.

4 Click Open to import the parameter.

You can also import versions of existing parameters to update your version, and synchronise versions across databases.

Creating Charts for Parameters

In the RANOPT Report Registry, you can use SQL statements to create charts on which you can view parameter data.

You can create a number of different types of chart:

Bar charts

Line charts

Events

Backgrounds

You can view these charts using the Analysis menu in the RANOPT toolbar.

About the SQL Format for Defining Charts, Maps and Grids

When you are defining charts, maps or grids for parameters, you must use the SQL format described in the following table:

SQL Definition

select X-VALUE, Y- VALUE, X-LABEL Where X- VALUE is an integer/floating point value for the x-axis

Where Y- VALUE is an integer/floating point value for the y-axis

Where X- LABEL is an optional value for labelling the x-axis

from nrml_umts_measurements

- or -

from nrml_ue_umts_sets

Result set table for scanner data.

Result set table for UE data.

where filter_id = &FILTER_ID& Reference back to a particular filter.

group by latitude, longitude Optional.

order by datetime Optional.

To ensure your SQL works correctly, click Test. In the dialog box that appears, you can test your SQL statement on a filter.


Creating Bar Charts for Parameters

In the RANOPT Report Registry, you can use an SQL statement to create a bar chart for a parameter.

Bar charts plot measurements ignoring time, and plot every value returned by the SQL statement.

To create an SQL statement for a parameter:


2 In the list of parameters, expand the parameter for which you want to create a bar chart.

3 Select Chart, and click the Create Bar Chart button .

- or -

Right-click Chart, and then from the menu that appears, point to Create and click Bar:

The SQL Statement window appears:


4 Select the appropriate parameter group.

5 Using SQL, create a query that will be run on the filtered data to generate the bar chart. For information on the format for the Chart SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


6 Select values for the y-axis, the series label and the display label.

The list of available values is based on values defined in the SELECT statement.

7 Click Apply to save your bar chart SQL statement. This picture shows an example:


Creating Line Charts for Parameters

In RANOPT Report Registry, you can use an SQL statement to create a line chart for a parameter.

Line charts plot measurements against time, and plot every value returned by the SQL statement.



2 In the list of parameters, expand the parameter for which you want to create a line chart.

3 Select Chart and then click the Create Line Chart button .

- or -

Right-click Chart and then from the menu that appears, point to Create and click Line:




5 Using SQL, create a query that will be run on the filtered data to generate the line chart. For information on the format for the Chart SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


6 Select values for the y-axis, the series label and the display label.

The list of available values is based on values defined in the SELECT statement.To ensure your SQL works correctly, click Test. In the dialog box that appears, you can test your SQL statement on a filter.

7 Select values for the x-axis (date/time), the series label and the y-axis.

The list of available values is based on values defined in the SELECT statement.

Click Apply to save your SQL statement. This picture shows an example:


Creating Event Charts for Parameters

In the RANOPT Report Registry, you can use an SQL statement to create an event chart for a parameter.

Event charts are linked to a bitmap property page, which enables you to plot specific bitmaps. However, if a bitmap cannot be found for a given index, a default bitmap is used.

The events will be drawn just above the line series area, with a dotted line running from top to bottom over the line chart.



2 In the list of parameters, expand the parameter for which you want to add an event.

3 Select Chart, and then click the Create Event Chart button .

- or -

Right-click Chart and then from the menu that appears, point to Create and then click Event:




5 Using SQL, create a query that will be run on the filtered data to generate an event chart. For information on the format for the Chart SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


6 Select values for the x-axis and event labels. The chosen value for the event label must refer to the parameter which provides the 'bitmap' colour map, used to plot the value.

The list of available values is based on the values defined in the SELECT statement.


7 Click Apply to save your event chart SQL statement. This picture shows an example:


Creating Background Charts for Parameters

In RANOPT Report Registry, you can use an SQL statement to create a background chart for a parameter. Background charts colour the background area of a chart.



2 In the list of parameters, expand the parameter for which you want to add a background.

3 Select Chart, and click the Create Background Chart button .

- or -

Right-click Chart and then from the menu that appears, point to Create and click Background:




5 Using SQL, create a query that will be run on the filtered data to generate a background chart. For information on the format for the Chart SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


6 Select values for the x-axis and background labels.

The list of values is generated from the SELECT statement in the SQL statement.

The chosen value for the background label must refer to the parameter which provides the "bitmap" colour map, used to plot the value.

7 Click Apply to save your background chart SQL statement. This picture shows an example:


Creating Maps for Parameters

In the RANOPT Report Registry, you can use parameters to create maps. You can create:

Colour Range maps

Image maps

Line maps

Creating Colour Range Maps

In the RANOPT Report Registry, you can use an SQL statement to create a colour range map for a parameter.

A colour range map contains a list of values each represented by a symbol of a specific colour.



2 In the list of parameters, expand the parameter for which you want to add a colour range map.

3 Select Map, and then click the Create Colour Range Map button .

- or -

Right-click Map and then from the menu that appears, point to Create and click Colour Range:




5 Using SQL, create a query that will be run on the filtered data to create a colour range map. For information on the format for the Map SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


6 Select values for Value, Latitude, Longitude, Date/Time and Text (optional).

The chosen values must refer to the columns that provide the respective values in the SQL Statement.

7 Select the symbol type.

8 Define the X and Y offsets, by which to offset the data to be displayed.


9 To finish defining the style of the symbol, select the other options that you require. This table describes the options available:

Choose This Option To

Filled Display the symbol as a filled shape.

Transparent Display the symbol as a transparent shape.

Use Pixels Display the symbol at a specified pixel size regardless of the zoom level.

In the Size box, select the required pixel size.

If you do not want to select this option, in the Size box, type a value in metres to specify the symbol size. In this case, the display of the symbol on the Map View window will depend on the zoom level - the more zoomed in the bigger the symbol, and the more zoomed out, the smaller the symbol.

All in Legend Display all of the labels (and associated colours) on the Legend tab of the Map Information & Control window.

If you do not select this option, only the labels and colours displayed on the Map View are shown on the Legend tab.

Only Description in Legend

Display only the parameter description on the Legend tab of the Map Information & Control window (and not the numeric value).

If you do not select this option, the parameter description and numeric value are shown on the Legend tab.

10 Click Apply to save the colour range map. This picture shows an example:


Creating Image Maps

In the RANOPT Report Registry, you can use an SQL statement to create an image map.

An image map contains a list of values each represented by a specific bitmap.


1 Click the Parameters Tab.

2 In the list of parameters, expand the parameter for which you want to add an image map.

3 Select Map, and click the Create Image Map button .

- or -

Right-click Map and then from the menu that appears, point to Create and click Image:




5 Using SQL, create a query that will be run on the filtered data to create an image map. For information on the format for the Map SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


6 Select values for Value, Latitude and Longitude.


7 Type in a value in the Size in pixels box. By default this value is 16, which will draw the bitmap as a 16x16 bitmap on the Map View window.


9 To finish defining the style of the bitmap, select the other options that you require. This table describes the options available:




Only Description in Legend Display only the parameter description on the Legend tab of the Map Information & Control window (and not the numeric value).


10 Click Apply to save the image map. This picture shows an example:


Creating Line Maps

In the RANOPT Report Registry, you can use an SQL statement to create a line map.

A line map contains a list of values each represented by a line of a specific colour.


1 Click the Parameters Tab.

2 In the list of parameters, expand the parameter for which you want to add a line map.

3 Select Map, and click the Create Line Map button .

- or -

4 Right-click Map and then from the menu that appears, point to Create and click Line:




6 Using SQL, create a query that will be run on the filtered data to create a line map. For information on the format for the Map SQL, see About the SQL Format for Defining Charts, Maps and Grids on page 96.


7 Select values for Start Latitude, Start Longitude, End Latitude, End Longitude and Value.


8 If required, select values for Start Azimuth, End Azimuth and Text.


9 Select the required line thickness.


11 To finish defining the style of the line map, select the other options that you require. This table describes the options available:




Only Description in Legend Display only the parameter description on the Legend tab of the Map Information & Control window (and not the numeric value).



12 Click Apply. This picture shows an example:

Creating Grids for Parameters

In the RANOPT Report Registry, you can use parameters to create grids.

You can create:

Horizontal grids

Vertical grids

Table views

Creating a Horizontal Grid

In the RANOPT Report Registry, you can use an SQL statement to create a horizontal grid for a parameter.

A horizontal grid is a tabular window, which lists the returned values row-for-row, displayed horizontally.

To create a horizontal grid:


2 In the list of parameters, expand the parameter for which you want to add a horizontal grid.

3 Select Grid, and click the Create Horizontal Grid button .


- or -

4 Right-click Grid, and then from the menu that appears, point to Create and click Horizontal:




For a horizontal grid, the SQL query must return the following values: ref_no, datetime and datetime_str.


7 Select values for Date/Time and Row Colour.




Creating a Vertical Grid

In the RANOPT Report Registry, you can use an SQL statement to create a vertical grid for a parameter.

A vertical grid is tabular window, which lists the returned values row-for-row, displayed vertically.

To create a vertical grid:


2 In the list of parameters, expand the parameter for which you want to add a vertical grid.

3 Select Grid, and click the Create Vertical Grid button .

- or -


Right-click Grid, and then from the menu that appears, point to Create and click Vertical:




For a vertical grid, the SQL query must return the following values, ref_no, datetime and datetime_str.

6 Select values for Date/Time and Row Colour.

7 The chosen values must refer to the columns that provide the respective values in the SQL Statement.

8 Click Apply.


Creating Table Views

In the RANOPT Report Registry, you can use an SQL statement to create a table view for a parameter.

To create a table view:


2 In the list of parameters, expand the parameter for which you want to add a table view.

3 Select Grid, and click the Create Table View button .

- or -

Right-click Grid, and then from the menu that appears, point to Create and click Table View:





6 Select values for Date/Time, Value, Cell Colour and Link Using.




Adding a Query Variable to an SQL Statement

A number of the SQL statements used to determine some data are often used repeatedly, with just a few values in the statements are being modified.

To make this task easier, you can create a query variable, which is an SQL statement that can viewed on the Map View window, and then modified accordingly.

For example, to determine the nth best server, instead of creating an SQL statement for the first best server and then another for the second best server and so on, you can create one SQL statement and simply change the value of the variable for rank.

The SQL statement used to determine the nth Best Server Ec is described in this example:

Example select latitude, longitude, agg_ec, sc, ec_rank from( select latitude, longitude, agg_ec, sc,dense_rank() over(partition by latitude, longitude order by agg_ec desc ) ec_rank from( select latitude, longitude, max( agg_ec ) agg_ec, sc from nrml_umts_measurements where filter_id = &FILTER_ID& group by latitude, longitude, sc ) ) where ec_rank = &Ran k|1|nth Best Se rver&

The above statement uses a query variable as follows: &<Query variable>|<default value>|<Mouse over text-Hint>&

In this case, the query variable statement is executed as the following SQL: where ec_rank = 1

That is, the query statement has been converted into 1.

Using a Checklist in a Query Variable

If you are adding a query variable, you can specify a checklist of values to select from.

This sort of query variable consists of:

Name

Default value

Hint

Checklist-embedded query

The format of this query variable is as follows: &Variable Name|Default Value|Hint|CHECKLIST{select stmt}{Type}&

Where select stmt is a select statement that will populate the checklist with a set of values and type is either NUMBER or STRING. However, instead of using a select statement, you can have a list of values.


For example: CHECKLIST{ACTIVE,MONITORED,DETECTED}{STRING} CHECKLIST{10,20,30,40,50}{NUMBER}

This query may not contain any query variables except for &FILTER_ID&.

For example, the SQL statement used to determine the Ec for SC query for W-CDMA scanners is: SQL Statementselect latitude, longitude, case when ('1' = '&Group by function|1|1 for max,2 for avg and 3 for min&' or 'MAX'= upper('&Group by function|1|1 for max,2 for avg and 3 for min&')) then max(agg_ec) when ('2' = '&Group by function|1|1 for max,2 for avg and 3 for min&' or 'AVG'= upper('&Group by function|1|1 for max,2 for avg and 3 for min&')) then 10 * log(10,avg(power(10,agg_ec/10))) when ('3' = '&Group by function|1|1 for max,2 for avg and 3 for min&' or 'MIN'= upper('&Group by function|1|1 for max,2 for avg and 3 for min&')) then min(agg_ec) end ec from nrml_umts_measurements where filter_id = &FILTER_ID& and SC in (&SCs|10,20,30|SCs to select on|CHECKLIST{select distinct sc from nrml_umts_measurements where filter_id = &FILTER_ID&}{NUMBER}&) group by latitude, longitude, sc

Using a Droplist in a Query Variable

If you are adding a query variable, you can specify a drop-down list of values to select from.

The query variable consists of:

Name

Default value

Hint

List of values where only one value can be selected

The format of the query variable is as follows: &Variable Name|Default Value|Hint|DROPLIST{select stmt}{Type}&

Where select stmt is a select statement that will populate the drop-down list with a set of values and type is either NUMBER or STRING. However, instead of using a select statement, you can have a list of values.

For example: DROPLIST{Min,Max,Avg}{STRING} DROPLIST{10,15,25,30,35}{NUMBER}

This query may not contain any query variables except for &FILTER_ID&.


For example, the SQL statement used to determine the Ec for Handset query is: SQL Statementselect latitude, longitude, ec, sc, ec_rank from ( select latitude, longitude, ec, sc, dense_rank() over (partition by latitude, longitude order by ec desc ) ec_rank from ( select latitude, longitude, sc, case when(UPPER('&Min, Max Or Avg&') = 'MAX') then max(ec) when(UPPER('&Min, Max Or Avg&') = 'MIN') then min(ec) when(UPPER('&Min, Max Or Avg&') = 'AVG') then 10 * log(10, avg(power(10,ec/10))) end ec from nrml_ue_umts_sets where filter_id = &FILTER_ID& and upper(type) = upper(&Type&) group by latitude, longitude, sc ) ) where ec_rank = &Rank|1|nth Best&

Managing Reports in the Report Registry

On the Reports tab of the RANOPT Report Registry you can:

Create reports

Modify and delete reports

Import and export reports

Create SQL statements for reports

Modify and delete SQL statements for reports

Create parameters for reports

Modify and delete report parameters for reports

RANOPT reports can typically be used to:

Analyse data

Produce statistics

Produce graphs

Produce tables from drive test files that can be displayed in an Excel report


The parameters are displayed within a tree structure, which is organised according to technology type (W-CDMA, GSM and so on) and equipment type (Handset or Scanner). This picture shows an example:

Report Registry Reports tab

When you have defined the reports in the Report Registry, you can then generate them for particular filters in the Filter Manager. For more information on how to do this, see Working with Reports in the Filter Manager on page 152.

Creating Reports

To create a new report in RANOPT:

1 Ensure that you have created an appropriate report template.

2 In the Report Registry, click the Reports tab.

3 Expand the required technology type, for example WCDMA, and then select the required equipment type - Handset, Scanner or Miscellaneous:

4 Right-click, and from the menu that appears, click Create Report.

- or -

Click the Create Report button .

5 On the General tab, type a name and description for the report.


6 Select the equipment type(s) for which the report will be compatible:

7 Click the Search button , and browse to the Microsoft Excel template that you want to use for this report.

8 If you want to make this report available for use in benchmarking, select the Enable Benchmarking option.

When generating reports in the Filter Manager, you must select more than one filter to use a benchmarking report.

9 To set the replay position, select Allow Set Replay Position.

10 Click the Style tab, and select the Enable option.

11 Select the required SQL type (Colour Range, Image or Line) and the style type (Continuous or Discrete).


Click To

Add Add a value.

In the Add Value dialog box, select a colour to represent that range and type a value for that range.





Generate Randomly generate some range attributes with a specific value and random assigned colours.

Select a start colour and an end colour. Type a value for a minimum value, type a value for a maximum value and type a value for a Step interval. Click OK.

Copy Style From Use a style from a previously created parameter. Select a parameter from the Copy Style From Parameter window and click OK.

13 If you are defining Colour Range SQL:

Select the symbol type - rectangle, triangle, circle, cross or diagonal cross

Select Filled or Transparent

14 Type in X and Y offsets to offset the data to be displayed.

15 To specify the size of the symbol:

Select Use pixels and type a value in pixels. Zooming in or out on the Map View window will have no effect on the size of the symbol.

- or -

Type a value in metres. Zooming in or out on the Map View window will affect the size of the symbol - the more zoomed in, the bigger the symbol, and the more zoomed out, the smaller the symbol.


The Use Pixels option is only available for Colour Range SQL.

16 Select All in Legend to display all labels and their colours.

If you do not select this, the legend displayed for the Map View will only contain the labels and colours that are displayed on the Map View.

17 Select Only Description in Legend to display only the description of the parameter and not the numeric value of the parameter on the Legend tab of the Map Information & Control window.

If you do not select this, the legend displayed will contain the numeric value of the parameter as well as the description of the parameter on the Legend tab of the Map Information & Control window.

18 Click Apply.

19 After you have created a report, you can:

Create SQL statements for reports

Create parameters for reports

Modifying and Deleting Reports

In the RANOPT Report Registry, you can modify and delete reports.

To modify a report:

1 Click the Report tab.

2 In the left-hand pane, select the report that you want to modify.

3 Click the Modify Report button .

- or -

Right-click and from the menu that appears, click Modify:

4 Edit the report as required.

5 Click Apply to save the changes.


To delete a report:

1 Click the Report tab.

2 In the left-hand pane of the Report Registry, select the report that you want to delete.

3 Click the Delete Report button .

- or -

Right-click and from the menu that appears, click Delete:

4 In the dialog box that appears, click Yes to delete the report.

Importing and Exporting Reports

In the RANOPT Report Registry, you can export reports to file and import reports from other databases.

To export a report:

1 In the left-hand pane of the Report Registry, select the report that you want to export.

2 In the RANOPT Report Registry, click the Export button .

- or -

Right-click and from the menu that appears, click Export:



3 In the Default Directory box, define the default location that you want to export reports, unless you specify individual paths.


4 Select the report that you want to export:

5 If you want to export the report to a directory other than the Default Directory:

Click the Browse button and locate the directory where you would like to save the exported report, which is saved as a .mod file.


Click Save.

6 Click OK.

The report is exported to the required file location.

As well as exporting individual reports, you can export a group of reports. For information on how to do this, see Exporting a Reports Group on page 127.


To import a report:

1 In the Report Registry, click the Import button .

2 In the dialog box that appears, select a report to be imported:

3 Click Open.

The report is imported.

Exporting a Reports Group

In the RANOPT Reports Registry, as well as exporting individual reports, you can export a group of reports. A reports group is a set of reports grouped under a particular technology type (for example, W-CDMA) or a particular equipment type (for example, Handset).

The reports are exported as a group, but saved as individual (.mod) files.

1 In the left-hand pane, select the report group that you want to export.

2 Click the Export Group button .

- or -

Right-click and from the menu that appears, click Export Report Group:



3 In the Default Directory box, define the default location that you want to export reports, unless you specify individual paths.


4 Select the reports that you want to export:

5 If you want to export any of the reports to a directory other than the Default Directory:

Click the Browse button for the appropriate report, and locate the directory where you would like to save it. (Reports are saved as .mod files).


Click Save.

6 Click OK.

The reports are exported to the required file location(s).


Creating SQL Statements for Reports

In the RANOPT Report Registry, you can create an SQL statement for a report, which will return the required data:

1 Expand the report to which you want to add an SQL statement.

2 Click the Create Report SQL Statement button .

- or -

Right-click the SQL item , and from the menu that appears, click Create:

3 On the General tab, type a name for the SQL statement.

4 In the SQL Statement pane, create the SQL statement.

5 From the drop-down list, select values for the Latitude, Longitude and Value.

The list of available values is based on the SELECT statement in the SQL statement.

6 If you are creating SQL for the Map View, click the Style tab.

The style for the SQL results is inherited from the report.

7 If you are satisfied with this style, click Apply to save the SQL statement.

- or -

If you want to define a separate style for the SQL statement, select the Enable option and continue to follow these steps.

8 Select the required SQL type (Colour Range, Image or Line) and the style type (Continuous or Discrete).


Click To

Add Add a value.










10 If you are defining Colour Range SQL:

Select the symbol type - rectangle, triangle, circle, cross or diagonal cross

Select Filled or Transparent




- or -


The Use Pixels option is only available for Colour Range SQL.


If this is not selected, the legend displayed for the Map View will only contain the labels and colours that are displayed on the Map View.



15 Click Apply.

Modifying and Deleting SQL Statements for Reports

In the RANOPT Report Registry, you can modify and delete an SQL statement within a report:

1 Select the SQL statement that you want to modify.

2 Click the Modify SQL Statement button .

- or -

Right-click and from the menu that appears, click Modify.

3 Edit the SQL statement as required.



To delete an SQL statement for a report:

1 Select the SQL statement that you want to delete.

2 Click the Delete SQL Statement button .

- or -

Right-click, and from the menu that appears, click Delete.


Creating Report Parameters for Reports

In the RANOPT Report Registry, you can create a parameter specifically for a particular report.

To create a new report parameter:

1 Expand the report to which you want to add a report parameter.

2 Click the Create Parameter button .

- or -

Right-click the Parameter icon , and from the menu that appears, click Create:.

3 Type a name and description for the report parameter.

4 From the Report Parameter Group drop-down list, select the required report parameter group.

5 From the Data Type drop-down list, select the required data type.

6 Type a default value for the parameter.

7 Click Apply.


Modifying and Deleting Report Parameters for Reports

In the RANOPT Report Registry, you can modify and delete report parameters.

To modify a report parameter:

1 Select the parameter you want to modify.

2 Click the Modify Report Parameter button .

- or -

Right-click, and from the menu that appears, click Modify:

3 Edit the parameter as required.


To delete a report parameter:

1 Select the parameter you want to delete.

2 Click the Delete Report Parameter button .

- or -

Right-click, and from the menu that appears, click Delete:



Using the RANOPT Filter Manager

RANOPT filters gather specific data from the RANOPT database, which can then be used for detailed analysis and post-processing.

You can use filters to merge or divide up data in different ways. For example, you could create filters in the following scenarios:

You may have a series of drive test files split into hour-long segments of a drive test route. These smaller files may be of a more manageable size, and more reliable in the case of failure along the drive test route. You could merge the data in these files into a single filter representing the whole drive test period.

You may have a drive test file that contains data for three different devices. You could create three separate filters from this file, one for each device.

You may have a drive test file that contains data for three different networks. You could create three separate filters from this file, one for each network, for benchmarking purposes.

You can use the RANOPT Filter Manager to create, modify and delete filters.

For each filter, it is also possible to:

Generate reports, including benchmarking reports

Associate UE files with scanner files

Create parameter rules and apply them to filtered data

Create and view 'snapshots' of site and cell information

Define map offsets for drive test data

Export the filtered data

C H A P T E R 6


In This Section

Opening the RANOPT Filter Manager 134 Using Filters in RANOPT 136 Working with Reports in the Filter Manager 152 Geo-mapping UE Results with Scanner Results in RANOPT 157 Creating Parameter Rules 159 Creating and Viewing Snapshots 164 Defining Map Offsets for Drive Test Data 168 Exporting Data from the Filter Manager 171

Opening the RANOPT Filter Manager

To open the RANOPT Filter Manager:

1 Ensure you are logged in to your database.

To do this, click the RANOPT tab, and from the Options menu, click RANOPT Login.

2 Enter the username and password, and then choose the database.

3 From the Tools menu, click Filter Manager.

- or -

Click the Filter Manager button .

The name of the RANOPT database that you are connected to appears in the title of the Filter Manager dialog box.

It is important to set up the location of the reports and the tool with which you will view the reports.

This picture shows an example of the Filter Manager:


If the administrator has restricted the total size of the filters that you can create, a status bar is displayed at the top of the Filter Manager. This indicates the amount of space left to create both public and private filters. This picture shows an example (the user has been limited to 100KB of space for filters):

For more information on display of the Filter Manager, see About the Icons Used in the Filter Manager on page 135.

About the Icons Used in the Filter Manager

In the Filter Manager, the colour of the filter icons indicates their status. This table describes the icons and their status:

Icon Description

The exclusion rules have been applied to the filter.

Filtering on scrambling codes, filtering on BCCH and Polygon filtering has been applied to the filter, if it was selected.

The cell sites have been resolved for the filter.

The scrambling code summary table has been created.

This is only applicable for scanner data.

The filter has been modified and applied successfully.

A quick polygon has been created for this filter.

A polygon has been created for this filter.

This filter has been modified but has not been applied.


Using Filters in RANOPT

Filters subdivide detected data types by their attributes and enable you to select specific elements of the data. You can further filter data using the Rules Editor.

You can create filters based on the following criteria:

This Criteria Gathers Data

Date and time Within a specified time window.

Network operators Belonging to one or more network operator.

SC/BCCH On specific scrambling codes or BCCHs.

Polygons Belonging to the area defined by one or more polygons.

Equipment From vendor-specific file types, for example, Agilent E6474A.

Log files From specific log files.

For each filter, you can configure:

The data manipulation technique to be used (if any)

Exclusion rules to be used (if any)

Cell/Site snapshot to be used in reconciling measured data with cell data

Creating Filters in RANOPT

You create filters in RANOPT in order to select the specific drive data measurements from the database for analysis.

To create filters:

1 If you want to create entirely new filters, in the RANOPT Filter Manager, right-click in the white space. From the menu that appears, click Create Filter.

- or -

If you want to create new filters based on an existing filter, select the filter that you want to use as a template, click Create and then click Yes.

2 In the dialog box that appears, choose the type of filter that you want to create, by selecting the appropriate option:

This table describes the available options:

Filter Option Description

Merge Devices Creates a separate filter for each device name contained in the selected files.

For example, if you have 2 files where File 1 contains Device A and Device B and File 2 contained Device A and Device C, 3 filters are created; Filter 1 for Device A, Filter 2 for Device B and Filter 3 for Device C.

Merge All Files Creates a single filter, merging all devices from the selected files.

Individual Filters Creates a separate filter for each device contained in the selected files.


3 Type a name and description for the filter (if you have selected the Merge All Files option) or folder (if you selected the Merge Devices or Individual Filters options - the multiple filters generated will be stored in this folder).

If you leave the folder name empty, the filters are created in the root of the Filter Manager, and are not assigned to any folder.

4 On the Measurement Files tab, choose the log files to be included in the filter.

5 To refine your filter further, you can:

Choose to include or exclude polygons in the filter (on the Polygons tab)

Include a data manipulation technique (on the Manipulation tab)

Include cell/site snapshots (on the Cell/Site Snapshot tab)



6 Click Finish (if you are creating a Merge All filter) or Next (if you are creating another type of filter).

If you are creating a Merge All filter, it is created based on the options you have selected.

7 If you are creating another type of filter, you can preview the contents of the filter before you create it:

8 If required, you can make modifications. In the right-hand pane, you can use the context (or 'right-click') menu to:

Rename filters and folders

Add new folders

Move filters between folders (by either dragging and dropping or cutting and pasting)

Delete filters from folders

Delete drive test files from filters

In addition, if you select an individual filter or folder of filters, you can change the polygons, data manipulation techniques and/or snapshots related to the filter(s) in the left-hand pane.

9 When you have finished defining your filters, click OK.

If you are creating a merge devices filter or individual filter, the new filters are applied immediately, and the filter icons change to green.

If you are creating a merge all files filter, you are prompted to apply the new filter. You can apply it now or later.


The filters that are added to the Workspace will be available on the Map View window and the Chart View.

Selecting the Measurement Files to be Included in Filters

To choose the measurement files that will be included in a filter:

1 Click the Measurement Files tab.

This tab displays a list of the latest files that have been loaded. You can choose how the loaded files are ordered and displayed. For more information, see Setting How the File List is Displayed in the Filter Criteria Wizard on page 141.

The original file extension (for example, .fs1) is shown.

2 Select the required file(s) from the list.

If you have a large number of files to select from, you can perform quick and advanced searches, to filter the available list.

Performing a Quick Search for Measurement Files

To quickly search for the required measurement files:

1 Type in the start of the name of the required log file in the Filename or Device Selection box.

2 Click the arrow next to the Search button and from the menu that appears, select Ignore Case or Case Sensitive, depending on how you want to search.

Ignore Case is selected by default.

3 Click the Search button.

All log files that match the search criteria are listed.


Perform an Advanced Search for Measurement Files

To search for the required measurement files using more detailed criteria:

1 Click the Advanced Search button .

2 This table explains how to use the Advanced Search to find specific file(s):

Tab Description

General To filter the files based on times and dates, in the Date/Time Selection pane, select:

Fixed to specify a fixed From and To date

Relative to specify a relative date (today, yesterday, last week, last month and so on)

Nth Recent to specify a time period based on a fixed date and a defined number of days before that date (for example, 10/10/07 minus 4 days)

Specifying dates for this filter will include all data collected for that date and exclude all data not collected for that date.

To filter the files based on the equipment type, in the Equipment pane, select:

Scanner only to include only Scanner results in the filter

Handset (UE) only to include only UE results in the filter

Scanner and Handset (UE) to include Scanner and UE results in the filter

To filter the files based on technology type, in the Technology pane, select the required technology types, for example, W-CDMA or GSM/GPRS.

Operator/Equipment To filter the files based on network type:

Select the Filter on Network Operators option

Select the required network operator(s)

You can create separate filters for each network operator, to use for benchmarking reports.

To filter the files based on specific equipment:

Select the Filter on Equipment option

Select the required equipment

Carrier/Frequencies If you want to filter on all of the scrambling codes included within a group of sites defined in an ASSET filter, select the Link to Static Filter option and select the required static filter.

If you want to filter on data from specific UMTS Scrambling Codes (SCs), select the Filter on UMTS Scrambling Codes option and then:

Select the required SCs from the list

- or -

Specify a range of SCs and click the search button .

From the drop-down list, choose Select to select all of the SCs found within the specified range.

If you are filtering on GSM/GPRS data, and want to filter on specific Broadcast Control Channels (BCCHs):

Select the Filter on GSM Broadcast Control Channel option

In the list box, type the list of required BCCH values separated by commas


File Comments If you have Rohde and Schwarz files, and want to filter on the comments within them, you can create SQL statements based on search strings to search for particular comments.

The search strings need to be registered in the RANOPT Administrator.

To do this:

For the required comment type, select the required search string from the drop-down list. Alternatively, you can directly type the required text in the General/Free Hand Text box.

Click the Add Expression button to add the comment to the SQL statement

Build up the statement as required, adding more comments and using the

AND button , OR button and parentheses buttons

If you want to start the SQL statement again, click the Empty Search

String Area button .

If you want to start reset the entire tab, click the Reset Search Conditions

button .

3 After you have set your advanced criteria, click the Refresh button to update the list of files based on your criteria.

Setting How the File List is Displayed in the Filter Criteria Wizard

In the RANOPT Database Explorer, you can define how the drive test file list is displayed when defining filters. For example, you can choose to sort the files based on the network, the import source, date loaded, technology type and so on. This picture shows a series of drive test files organised by equipment:

Drive test files organised by equipment


If you change the sort order here, it will also change the sort order in the Filter Criteria file list.

To define the sort order:

1 Click the Sort and Order Drive Test File Explorer button .

The Table Sort dialog box appears. The left-hand list contains the information options and the right-hand list details the order in which they are sorted.

If you choose to order the file list by file size, in the File Size Grouping pane, you can specify the file size range. Files are then displayed in groups according to this range. For example, if the file size grouping is set to be 15MB, the files are arranged in groups 0-15MB, 16-30MB, 31-45MB and so on.

2 To select an option to be displayed, click the required option and then click the

right direction button .

To remove an option from the display list, select it and then click the left

direction button .

3 To order the list, you can move the options up and down by clicking the required

option and then clicking the up and down direction buttons.

4 When you have included all of the information options and defined the correct order, click OK.


Including or Excluding Polygons in Filters

When you are creating a RANOPT filter, you can choose to include or exclude particular polygons within it. To do this:

1 Click the Polygons tab.

2 Select the Filter on Polygons option.

3 In the list of available polygons, select the polygon that you want to include or exclude.

4 Click the Add button to include the polygon.

- or -

Click the NOT button to exclude the polygon.

5 Continue to build up the polygons to be included and/or excluded in a logical statement (or rule), by selecting a polygon and clicking the appropriate button.

The AND button adds the polygon with an 'AND' operator to the rule

The OR button adds the polygon with an 'OR' operator to the rule

To add parentheses to the rule, click in the rule at the point at which you want to

add them, and then click the required button

To clear a polygon from the rule, in the rule place the cursor to the right of the

required polygon, and then click the Remove Polygon button .

This picture shows an example of a basic filter:


In the example, the filter will include the 'coastline' polygon, but exclude the 'lakes' polygon.

6 When you have created your rule, click the Validate button to ensure that it works correctly.

7 Click OK to save the filter.

As well as including and excluding polygons within a filter, you can also create quick polygon filters, which will filter data based on a polygon selected in the Map View. For more information on how to do this, see Creating Quick Polygon Filters.

Including Data Manipulation Techniques in Filters

When you are creating a RANOPT filter, you can choose to include a data manipulation technique within it. To do this:

1 Click the Manipulation tab.

2 From the Manipulation Technique drop-down list, select the required technique:

3 If required, type the bin size that you want to use.

4 If you want to apply a map offset when the filter is applied, select the Apply Map Offset option, and then choose the required offset from the drop-down list.

5 If you want to include one or more rules, select the Apply Exclusion Rules option, and then choose the required rules from the list available.

The rules are created using the Rules Manager on page 159, which you can

open by clicking the Rules Manager button .


Including Cell/Site Snapshots in Filters

When you are creating a RANOPT filter, you can include specific cell/site snapshots within it. To do that:

1 Click the Cell/Site Snapshots tab.

2 Select the Associate Cell/Site Snapshot option.

3 From the list of folders, browse to the location of the snapshot you want to associate with the filter.

Tips :

In the Most Recent Snapshots, you can choose a dynamic option - the most recent snapshot for all networks, or the most recent snapshot for a particular network.

To view the available snapshots in the Snapshot Manager, click the Snapshot

Manager button .

4 Select the snapshot.

Modifying a Filter

In the RANOPT Filter Manager, you can modify and delete filters.

When you delete a filter, you also delete all of the results associated with that filter. Any users making use of this data will have to create another filter to get back to the results.

To modify a filter:

1 Right-click the required filter and from the menu that appears, click Modify Filter.

2 In the dialog box that appears, make the required changes.

3 Click OK to save the changes.

4 Click Yes when prompted to re-apply the filter.

To delete a filter:

1 Select the filter that you want to delete.

To delete more than one filter, hold down the Ctrl button and click each filter that you want to delete.

2 Right-click, and from the menu that appears, click Delete Filter.



Adding Filters to the Workspace

In the RANOPT Filter Manager, you can filters directly to the Workspace. The Workspace is a module that contains up to ten filters that you may be working with at any time. For more information, see Using the Workspace on page 237.

To do this:

1 Select the filter that you want to add to the Workspace.

To select more than one filter, hold down the Ctrl button and click each filter.

2 Right-click, and from the menu that appears, click Include Into Workspace.

The Workspace opens, and the filter is added. This picture shows an example:

- or -

1 From the Tools menu, click Workspace.

2 In the Filter Manager, select the filter that you want to add to the Workspace.

To select more than one filter, hold down the Ctrl button and click each filter.

3 Drag the required filter onto the Workspace, and release the mouse button to drop it.

In the Filter Manager, the filter is labelled with the letter 'w' to indicate that it is included in the Workspace:


Applying Filters in RANOPT

When a filter has been created or modified in RANOPT, you must apply it so that it will filter the data and generate the required result set.

When you modify a filter, you are automatically prompted to apply it, but you can apply a filter manually at a later date. To do this:

1 In the RANOPT Filter Manager, select the required filter.

To select more than one filter (up to maximum of eight), hold down the Ctrl button and click each filter.

2 Right-click, and from the menu that appears, click Apply Filter:

- or -

If you want to apply your own filter, and update the Filter Manager with any public filters that other database users may have created during this session, click Apply Filter and Force Refresh.

The Applying Filter dialog box appears and your filter is applied.

3 To view the filtered results for the scanner data, in the Applying Filter dialog box, click the Scanner button.

- or -

To view the filtered results for the handset data, in the Applying Filter dialog box, click the Voice button.

The Scanner Summary report or Voice Summary report appears, as appropriate.

If your filter contains both types of data, both the Handset and Scanner buttons will be available in the Applying Filter dialog box.

4 When the filter has been applied, the icon colour in the Filter Manager changes to green.


If an error occurs whilst applying the filter, click the Messages button to view the error. It will not be possible to view data from this filter until the error(s) has been resolved.

You can also apply all filters, or just those that are invalid. To do this, right-click in the Filter Manager window, from the menu that appears, click:

Apply ALL Filters to apply all the filters

Apply only INVALID Filters to apply the filters that are invalid

The filters will be applied consecutively (not simultaneously).

Managing Filters in RANOPT

In the RANOPT Filter Manager, when you hold the mouse over a filter, an information window is displayed containing information about the filter. This table describes the information displayed for each filter:

Name Description

Name The name of the filter.

ID The filter ID of the filter.

Equipment The equipment type, scanner, handset or both.

Technologies The type of technology - W-CDMA, GSM, HSDPA and DVB-T/H.

Snapshot The name of the snapshot used.

Manipulation The data manipulation technique used.

Area Filter The polygon(s) used by the filter.

Files Included The name and number of drive test files that are included in the filter.

Scheduler Log Messages Scheduler messages, if any.

RANOPT filters are stored in a folder structure. These folders may be dragged, dropped, deleted and renamed. Filters can be added to the root and then moved to a folder that has already been created.

To create a folder:

1 Right-click in the empty space and from the menu that appears, click Create Folder.

2 Type a name for the new folder, and then press Enter.

To rename a folder:

Select a folder from the Filter Manager and from the menu that appears, click Rename Folder.

To delete a folder:

Select a folder from the Filter Manager and from the menu that appears, click Delete Folder.


To move filters between folders:

1 Select the filter that you want to move.

2 Drag it onto the folder to which you want to add it.

3 Release the mouse button to add it to the chosen folder.

Creating a Quick Polygon Filter in the Filter Manager

As well as including and excluding specific polygons within a filter, you can also create quick polygon filters. A quick polygon filter only returns data from a selected Map View window.

You can create a quick polygon filter:

In the Filter Manager

- or -

In the Workspace

To create a quick polygon filter in the Filter Manager:

1 Ensure that you have an open Map View window showing the data that you would like to include in the polygon.

2 Create a filter in the usual way.

3 In the Filter Manager, right-click the filter and from the menu that appears, click Create Quick 2DView Area Filter:

- or -


If you have added the filter to the Workspace, in the Workspace, right-click the filter and from the menu that appears, click Create Quick 2DView Area Filter:

The Quick Poly Filter Association dialog box appears.

4 Click Next to display this screen:

5 Click the Capture Map Extent button and then select the Map View window.

The Map View window map extents are used to define the dimensions of polygon.

6 Click Next.

The coordinates of the selected map extents (which form a rectangle) are displayed.

7 Click Finish to save the polygon in the filter.

An information window is displayed to confirm that the polygon was created successfully, with a default name.

8 Click OK.

9 To apply the filter immediately, click Yes when prompted.

10 Right-click the filter and from the menu that appears, click Apply Filter.

This produces a filtered result set containing data only from the selected map extent.

If you plot this data on the Map View, only the data included in the polygon is displayed.


To reset the filter, so that it no longer contains the quick polygon:

1 In either the Filter Manager or Workspace, right-click the filter.

2 From the menu that appears, click Reset Quick 2DView Area Filter.

Viewing a List of Data Sessions

In the RANOPT Filter Manager, you can use the Sessions List window to view the entire list of data sessions for filters that contain UE measurements or UE measurements copied to scanner measurements.


Sessions List Window

To open the Sessions List window:

1 Ensure you have created an appropriate filter.

2 In the RANOPT Filter Manager, right-click the required filter and from the menu that appears, point to Analysis Tools, W-CDMA Handsets and then click Display Data Sessions Performed.

The Sessions List window appears.


Refreshing the List of Public Filters

If someone else is working in the same database as you during the same session, they may create public filters that you could find useful. To make these filters available:

In the Filter Manager, from the View menu, click Refresh.

The Filter Manager reloads all of the public filters that have been created by all users logged into database.

If you are creating a filter and another user creates a public filter at the same time, you can choose to ignore the public filter and continue creating your own.

Working with Reports in the Filter Manager

In the Filter Manager, you can work with reports in a number of ways. You can:

Specify parameter values for reports

Generate reports for filters

Generate benchmarking reports

Specifying Parameter Values for Reports

In the RANOPT Filter Manager, you can specify the values for the parameters used to generate reports for a particular filter, and therefore generate different reports using different parameter settings.

To do this:

1 Right-click on the required filter and from the menu that appears, click Specify Report Parameters.


The Report Parameter Value Specification dialog box appears. This picture shows an example:

2 From the left-hand list, select the report for which you want to set the parameter values.

3 Click the Modify Report Parameter button .

- or -

Right-click, and from the menu that appears, click Modify.

4 On the right-hand side, edit the parameters on the various tabs available by double-clicking the value that you want to change and typing the new value.



Defining the Report Template Directory

Before you can run reports from the RANOPT Filter Manager, you must ensure that you have correctly defined the Report Template Directory. This is the folder into which the latest report templates (contained in the installation) will be automatically copied during start-up. The templates in this folder are used when you run reports.

To define the Report Template Directory:

1 In the Filter Manager, from the Tools menu, click Report Options.

2 In the dialog box that appears, specify the folder that you want to use as the Report Template Directory. This picture shows an example:

To quickly locate the required folder, click the Search button .

3 Click Close.

Generating Reports from the Filter Manager

In the RANOPT Filter Manager, you can generate reports for a particular filter. To do this:

1 Ensure that you have defined the Report Template Directory, which specifies the location of the report templates. For more information, see Defining the Report Template Directory on page 154.

2 Ensure that the parameter values for the reports have been set correctly. For more information, see Specifying Parameter Values for Reports on page 152.

3 In the RANOPT Filter Manager, select the filter for which you want to generate a report.

4 Right-click and from the menu that appears, point to Analysis Tools, and then the required technology and equipment type, for example, W-CDMA Handsets or GSM/GPRS/EDGE Handsets.


5 From the menu that appears, select the report that you want to generate:

The report is generated as an Excel spreadsheet. This picture shows an example:


Generating Benchmarking Reports

When analysing your network, it is useful to perform benchmark analysis. To assist you with this, in RANOPT you can generate reports using data gathered from more than one network operator or from more than one data source.

To create a benchmark report:

1 In the Report Registry, ensure that the required report type is compatible for benchmarking, by having the Enable Benchmarking option selected. For more information, see Creating Reports on page 122 and Modifying and Deleting Reports on page 124.

2 In the RANOPT Filter Manager, hold down the Ctrl button and click the filters that are required for the benchmarking,

- or -

In the RANOPT Filter Manager, hold down the Shift button and click the first and last filter. All the filters in between will be selected automatically.

3 Right-click and from the menu that appears, point to Analysis Tools, and then the required technology and equipment type, for example, W-CDMA Handsets or GSM/GPRS/EDGE Handsets.

4 From the menu that appears, select the report that you want to generate.

5 In the dialog box that appears, ensure that the parameters are set at the correct value for the benchmarking report:

6 Click OK.

The report is generated as an Excel spreadsheet.


Geo-mapping UE Results with Scanner Results in RANOPT

In the RANOPT Filter Manager, you can associate a UE (User Equipment) results file with a scanner results file, by mapping the time in the UE results file with the latitude/longitude of the Scanner results file.

To do this:

1 In the Filter Manager, from the Tools menu, click Geo-Mapping.

2 Locate the required files, by selecting an appropriate date and time in the Display files from pane.

In this example, all files from midnight on 1st January 2008 will be located, and made available for selection.

3 Click the Search button.

All of the UE and scanner results files that are dated from the specified date/time onwards are displayed.

4 In the Scanner Files pane, select the required scanner file.

In the UE Files pane, select the UE file that you want to associate with the selected scanner file.

It is possible to associate more than one scanner file with a UE file.

5 Click the right arrow button to create the association.


The files are associated. This picture shows an example:

6 Click the Start Geo Mapping button.

The associated files are processed from the bottom up.

7 When the files have been processed, click Yes if you want to create a filter with the mapped values.

If you want to include the filter in the Map View and the Chart View, select Include Filter in 2D-View and Chart View.


Creating Parameter Rules

You can use the Rules Manager to create parameter rules, and apply them to filtered data.

Parameter rules consist of mathematical expressions, which the Rules Manager runs in sequence on filtered data. Rules are grouped into rule sets.

To open the Rules Manager:

In the RANOPT Filter Manager, from the Tools menu, click Rules Manager.

This picture shows an example of the Rules Manager:

Example Rules Manager

Creating a Rule Set

Before you can create rules, you must create a rule set, which groups rules together.

To create a rule set:

1 In the Rules Manager, click the Create a New Rule Set button .

2 Type a name for the rule set.

3 Type a description for the new filter.

4 Click OK.

You can now create rules for this rule set.


Creating Rules within a Rule Set

After you have created a rule set, you can create rules for it.

To see a worked example of creating a rule, see An Example of a Rule Set on page 161.

To create a rule:

1 In the Rules Manager, select the rule set to which you would like to add the rule.

2 Click the Modify Rule Set button .

3 Click the Create a New Rule button .

The Rule Builder dialog box appears. This picture shows an example:

4 Select the data group on which you will use the rule, for example, UMTS Scanner Measurements or GSM Scanner Measurements.

5 Based on the data group, select the parameter that will be used in the rule.

6 To build the first expression for the rule:

Select an operator

Select the required value type (Number/float or string)

Type the required value

7 Click the Add Expression button .


The first expression is added.

8 Continue to build the rule by creating expressions as described above, and then clicking:

The AND Into Rule button to add the expression with an AND logical operator

The OR Into Rule button to add the expression with an OR logical operator

9 Click the Test button to validate the expression.

If the expression is invalid, an error message is displayed and the rule is not

accepted. Click the Clear Rule button and create the rule again.

10 When you have created a valid rule, click OK.

The rule appear in the list of rules for that rule set in the Rules Manager. The rule set is now available when you create a new filter.

An Example of a Rule Set

The following instructions describe a worked example of creating a rule set and rule for it. This rule set will instruct the filter to ignore Ec and Ec/Io values classed as 'invalid', which in this case means an Ec/Io of -30 or less and an Ec of -100 or less.

1. In the Rules Manager, click the Create a New Rule Set button .

2. In the Rule Builder dialog box, type the rule name as Ignore Invalid Ec and Ec/Io Values.

3. Click the Create a New Rule button .

4. From the Group list, select UMTS Scanner Measurements.

5. From the Parameter list, select AGG_EC_IO.

6. From the Operator list, select <=.

7. Select the Number/Float option, and in the Value box, type -30.


8. Click the Add Expression button . The Rule Builder dialog box should now look like this:

9. From the Parameter list, select AGG_EC.

10. From the Operator list, select <=.

11. Select the Number/Float option, and in the Value box, type -100.


12. Click the AND Into Rule button . The Rule Builder dialog box should now look like this:

13. Click the Test button to validate the expression. Click OK to accept the validation.

14. Click OK.

Modifying Rule Sets and Rules

In the Rules Manager, you can modify rule sets and rules.

To modify a rule set:

1 Select the required rule set from the list available.


3 Change the name and description, if required.

4 If you want to modify a rule within this rule set, select the rule and then click the

Modify Rule button .

5 In the Rule Builder dialog box, modify the rule as required.

Use the Test button to ensure that your changes are valid.

6 If you have a number of rules, you can move them up or down the processing

sequence by clicking the Move Up and Move Down buttons as required.


7 Click OK.

8 Click Commit.

Deleting Rule Sets and Rules

In the Rules Manager, you can delete rule sets and rules.

To delete a rule set:

1 Select the required rules set from the list available.

2 Click the Delete Rule Set button .


To delete a rule:

1 Select the rule set that contains the rule that you want to delete.


3 Select the rule that you want to delete, and then click the Delete Rule button .


Creating and Viewing Snapshots

A snapshot captures the position and configuration of sites and cells within ASSET, at a particular moment in time, and can be used to replay the drive tests in the 'network' it was gathered in at any time.

RANOPT keeps a snapshot of the planned database (for example ASSET) containing all the relevant site and cell information, and then uses this snapshot to reconcile measured data with the relevant site and cell IDs.

In RANOPT, you can use the Snapshot Manager to:

Create a snapshot

Modify and delete snapshots

View snapshot data

To open the Snapshot Manager:

In the RANOPT Filter Manager, from the Tools menu, click Snapshot Manager.


Creating Snapshots

In the Snapshot Manager, you can create snapshots. To do this:

1 Right-click in the blank space in the left panel.

2 From the menu that appears, point to Create and then click Snapshot.

3 In the Name box, type a name for the snapshot.

4 If required, in the Description box, type a suitable description for the snapshot.

5 In the Network Operator box, select the network operator for the snapshot. This value can be used when filtering on data for a particular network.

If the snapshot is collecting data from an ENTERPRISE that covers more than one network, select 'Unassigned Network'.

6 In the Project box, select the project containing the data that you want to use in the snapshot.

7 Select the technology (or technologies) used in the network from which you are creating the snapshot.

8 Choose which sites and cells you want to include in the snapshot:

All sites and cells in the project

Those within static filters only - if you choose this option, select a static filter from the drop-down list

Those within polygons only - if you choose this option, select the polygon(s) from the list available

9 Click Commit.


This picture shows an example snapshot:

You can organise your snapshots in folders. To create a folder:

1 Right-click in the blank space in the left panel.

2 From the menu that appears, point to Create and click Folder.

3 Type a suitable name for the folder and press Enter.


Modifying and Deleting Snapshots

In the RANOPT Snapshot Manager, you can modify and delete snapshots.

To modify a snapshot:

1 Select the required snapshot from the list.

2 Right-click and from the menu that appears, click Modify.

3 Make the required changes to the snapshot.

4 Click Commit.

To delete a snapshot:

1 Select the required snapshot from the list.

2 Right-click and from the menu that appears, click Delete.


Viewing Snapshot Data

In the RANOPT Snapshot Manager, you can view the cell/site data for a snapshot that you have created.

To do this:

1 Select the snapshot for which you want to view cell/site data.

2 Right-click, and from the menu that appears, click View Data.

The Snapshot dialog box opens, showing the site/cell data for the snapshot.



You can view a variety of data for each technology, including the name of each site/cell included, the latitude/longitude and so on. You can also view details of any neighbours that are present.

If you want to save this data in another format:

1 Click the required button as described in this table:

Click To save Cell/Site Data in

HTML format

Microsoft Excel format

XML format

ASCII Text File format

2 In the dialog box that appears, browse to a suitable location and click Save.

Defining Map Offsets for Drive Test Data

Sometimes when drive test data is plotted on the Map View the plotted route does not correspond to the actual route taken during the drive test. This is because the coordinate system that the scanner was using during the drive test does not correspond exactly to the coordinate system of the Map View.

In order to solve this problem, RANOPT can offset the drive test data in order to make it correspond to the actual route. The Map Offset Manager enables you to specify the required offset value, which will be applied to drive test data when the filter is applied.

To open the Map Offset Manager:

In the RANOPT Filter Manager, from the Tools menu, click Map Offset Manager.


This picture shows an example of the Map Offset Manager:

Creating Map Offsets

In the Map Offset Manager, you can create map offsets. To do this:

1 Click the Create New Map Offset button .

- or -

Right-click in the Offset Manager window and from the menu that appears, click Create.

2 Type a name for the offset.

3 Type the latitude and longitude coordinates for the offset.

- or -

Calculate them automatically, using the Map Offset Wizard:

Open a Map View window if it is not already open.

Click Next.

Click the first location on the map. This should be the location as plotted on the Map View.

Click Next.

Click on the second location on the map. This should be the location as plotted by the scanner during the drive test.

Click Next.


The offset is calculated and displayed in the window:

Click the OK button to save the latitude and longitude of the offset.

4 Click Commit to save the offset.

If you have just one offset, then this is the offset that will be automatically applied to drive test data when the filter is applied. However, if you create more than one offset, then you can select which one is the default. For information on how to do this, see Setting the Default Map Offset on page 170.

Setting the Default Map Offset

If you have created more than one map offset on page 169, you can select which one is the default. This the offset that will automatically be applied to drive test data when the filter is applied.

To set the default offset:

1 In the Map Offset Manager, select the offset that you want to make the default.

2 Click the Set as Default button .

- or -

Right-click the offset and from the menu that appears, click Set as default.

The default map offset is displayed in bold.

Modifying and Deleting Map Offsets

In the Map Offset Manager, you can modify and delete map offsets.

To modify a map offset:

1 Select the required map offset from the list available.

2 Click the Modify Offset button .

- or -

Right-click, and from the menu that appears, click Modify.

3 Make the required changes, and then click Commit.


To delete a map offset:

1 Select the required map offset from the list available.

2 Click the Delete Offset button .

- or -

Right click, and from the menu that appears, click Delete.


Exporting Data from the Filter Manager

In the Filter Manager, you can export a number of different types of data in a variety of ways. You can:

Export results data into a CSV file, using a simple export format

Export scanner results data to a variety of formats, using the Export Wizard

Exporting Results Data for a Filter

In the RANOPT Filter Manager, you can export results data for a filter. To do this:

1 Ensure that you have create the required simple export format. For more information, see Creating Simple Export Formats on page 172.

2 In the RANOPT Filter Manager, right-click on a filter and from the menu that appears, click Simple CSV Export.

3 In the dialog box that appears, select the simple export format that you want to use. The parameters included in the selected format will be those that are exported from the filter.

4 If you want to include the parameter headings in the export file, ensure that the 'Include Heading in Export File' option is selected:

5 Click Continue.

6 Browse to the required location for the export file, and in the File name box, type the required filename.

7 Click Save.

The data is exported to the selected file.


8 Click OK when the export has completed.

Creating Simple Export Formats

In the RANOPT Filter Manager, you can create simple export formats, that can be used to export the results data for specific parameters within a filter.

To create a simple export format.

1 From the Tools menu, click Simple Export Format Creator.

The Simple Export Format Creator appears.

2 Click the Create New Export Layout button .

3 In the Simple Export Format Name box, type a name for the format.

4 In the Measurement Parameters pane, select the parameters that you want to

include in the exported data and click the Move button .

The parameter is moved to the Select Order pane. This picture shows an example:


In this example, a number of details will be included in the exported data, such as the Filter ID, Date and a series of different Ec and Ec/Io values.

Tips :

To change the order, click the Move Up and Move Down buttons as required.

To move a parameter from the list, click the Delete button . It is returned to the Measurement Parameters pane.

5 Click Commit to save the format.

You can now use this simple export format to export data for a filter.

Exporting Scanner Results Data Using the Export Wizard

In the RANOPT Filter Manager, you can use the Export Wizard to export scanner results data to a number of formats:

HTML

XML

ASCII Text

Microsoft Excel

After you have exported the scanner results data, you can also import this data into ASSET (if you have it installed).

To do this:

1 Right-click the required filter (which must contain scanner data) and from the menu that appears, click Export Wizard:


The Export Wizard appears.

2 Click Next.

3 In the Measurement Parameters pane, select the parameters that you want to

include in the exported data and click the Move button .

The parameter is moved to the Select Order pane. This picture shows an example:

Tips :

To change the order, click the Move Up and Move Down buttons as required.

To move a parameter from the list, click the Delete button . It is returned to the Measurement Parameters pane.


4 Click the Next button, and define the export layout:

If you want to include headings in the export file, ensure that this option is selected

Type the required Pilot/Sequence Grouping Column name, if you require one different to the default (SEQUENCE_NUM)

Type the required text delimiter, if you require one different to the default (a comma)

5 Click the Next button, and ensure that the summary of the data selected for the export is correct. This picture shows an example summary:

If it not correct, click the Back button and make the necessary changes.


6 When you are satisfied with the summary, click Next. The Export Data Preview displays the data that will be written to the file to be exported. This picture shows an example:

7 Click the Next button.

8 Select the export standard (or format) that you want to use - HTML, XML, ASCII Text or Microsoft Excel.

9 Type the path and file file name for the export file.

To quickly locate an appropriate path, click the Search button, browse to the required location, type the required filename and click OK.

10 Click Finish.

The filter results are exported to the chosen file. Click OK when the export has completed.


Analysing Data

In RANOPT you can analyse data in a number of ways.

You can:

Replay drive test measurements and analyse the data in a number of formats, including line charts and bar charts

Analyse network messages and DQA messages

View drive test data on the Map View

To help you perform these tasks, you can:

Manage the data replay windows

Save the layout of data replay windows

In This Section

Replaying Drive Test Measurements 178 Viewing UE Data Using a Network Message 191 Viewing Data Quality Analysis (DQA) Messages 194 Using the Map View When Replaying Data 196 Viewing The Speed and Direction of Filters 223 Managing the Data Replay Windows in RANOPT 224 Saving the Layout of Replay Windows on the Desktop 228

C H A P T E R 7


Replaying Drive Test Measurements

RANOPT stores raw drive test data collected by handsets and scanners in the database, and you can view this data periodically along the drive test route.

You can use the replay buttons on the ENTERPRISE toolbar (or the options on the Replay menu) to replay the data, by stepping through it or playing it back at various speeds. This enables you to perform detailed analysis on problem calls, dropped calls, set-up failures, and so on.

You can:

Select data elements to replay

Replay and stop data elements

During replay, the drive test data is synchronised and the displayed data is continually updated in any open display window, such as the Map View window or a tabular list.

You can also view replayed data in:

A line chart

A table view

A bar chart

A horizontal grid

Selecting Data Elements to Replay in RANOPT

To select a data element from which to start replaying:

1 In the RANOPT toolbar, click the Set Position button .

- or -

From the Replay menu, click Set Position.

The Replay Positioning dialog box appears:

2 In the Jump To pane, select the date and time for which you want to replay data.

3 If required, drag the slidebar to the point in the samples from which you want to replay:


In this example, the replay will start 47% through the drive test data.

4 Click Go .

If any analysis windows are open, data elements matching your chosen criteria are displayed. If you want to move to a particular point in the list, click the appropriate button as described in this table:

Click This Button To Do This

Step Forwards Move up one place up the list.

Step Backwards Move one place down the list.

Jump To Start Move to the start of the list.

Jump To End Move to the end of the list.

5 When you are at the correct point in the list, you are now ready to replay data elements.

Replaying and Stopping Data Elements

In RANOPT, to replay data elements:

1 Ensure that you have selected the required data elements.

2 On the RANOPT toolbar, click Play .

The loaded file is played.

3 To change the speed at which the data is replayed:

Click the Speed button

In the Speed Control dialog box, move the slide bar to the required speed:.

4 To move to a different point in the data:

Click the Set Position button

In the Replay Position dialog box, move the slide bar to the required point in the data.

To stop playing data elements:

On the RANOPT toolbar, click Stop .


Replaying Data Using a Line Chart

When you are replaying drive test measurements, you can view the data values along the drive test route using a line chart.

You can configure the line chart to display any data present in your database. This data is displayed differently depending on the parameter, for example, the Rx Level displays a series of lines to show data for the serving cell and six neighbour cells, whereas for other parameters only one value is displayed at each point and therefore only one line is shown.

This picture shows an example line chart:

Example Line Chart

To view data values using a line chart:

1 From the Analysis menu, point to Line Chart, and then click New (to create a new line chart) or the required line chart name.

If you are creating a new line chart, in the dialog box that appears, type a name and description, and then click OK.

2 If you are creating a new line chart (or want to add more parameters to the chosen

line chart), in the Line Chart dialog box, click the Parameter Selector button to add one or more parameters to the line chart.

You can add a number of different types of parameter to the line chart and each type displays a different type of data in the line chart window (and is added to a different tab in the Legend). This table describes the different types:

This Parameter Type Displays This

Line chart Line(s) on the graph plotting the data values.

Event Icons along the top of the graph, which indicate particular events, for example, voice call start/end.

Background Background colouring, depending on the parameter value.

For more information, see About the Parameter Selector on page 185.



The measurements data is replayed, and displayed in the line chart window.

Click Stop to stop the replay of the drive test.

4 You can change the data that is displayed in a number of ways. This table describes the options:

To Do This

Zoom out Click the Zoom Out button .

- or -

Hold down the left mouse button, and drag the mouse upwards.

Zoom in Click the Zoom In button .

- or -

Hold down the left mouse button and drag the mouse downwards.

Move the replay backwards in time In the Current Time box, click the left arrow button .

Move the replay forwards in time In the Current Time box, click the right arrow button .

Increase the line width on the chart In the Line Width box, adjust the size .

Display the value at a particular point Hover the cursor over the required point on the chart.

The crosshair and the displayed value snap to the nearest line on the chart, so as you move the cursor around the chart the value of the nearest line is shown, rather than the value at the cursor position.

Show/Hide the Legend tabs Click the Show/Hide Legend button . The tabs display:

The parameters (and associated colours) shown on the line chart

The events

The background

Connect the measurement points together with a line

Select the Show Lines option.

In the Point Separation Threshold box, type a limit in seconds. If the gap between two consecutive measurement values exceeds this limit, they will not be connected with a line.

Plot the points across a grid, to make it easier to identify a particular value Click the Show/Hide Grid Lines button .

Pan across the line chart Click the Allow Panning button .

Move the cursor from left to right across the line chart to move backwards and forwards through the replay.

Move backwards and forwards between events In the Legend, on the Events tab, right-click an event and from the menu that appears, click:

Next to move to the next event on the graph

Previous to move to the previous event on the graph

First to move to the first event on the graph

Change the range of the Y-axis Right click on the y-axis of the line chart. The Adjust Y Axis Range dialog box appears.

Define the maximum y-value

Define the minimum y-value

Click OK


Replaying Data Using a Table View

When you are replaying drive test measurements, you can create a historical view of the data values along the drive test route using a table view. The data is arranged in timestamp order from the start to the end of the route, and you can configure the table to display any parameters you require.

This picture shows an example table view:

Example Table View

To view data values using the table view:

1 From the Analysis menu, point to Table View, and then click New (to create a new table view) or the required table view name.

If you are creating a new table view, in the dialog box that appears, type a name and description, and then click OK.

2 In the dialog box that appears, click the Parameter Selector button to add one or more parameters to the table view, up to a maximum of 32.

For each parameter added, a new column will be displayed in the table view window.



Changes to the data element values over the period of the drive test route are displayed in the Table View.


4 To export the table view results in a printable format, click the Print button .


- or -

To export the table view results as a data file:

Click the Export button .

Define the export settings and the filename

Click Export

Replaying Data Using a Bar Chart

When you are replaying drive test measurements, you can view the data values along the drive test route using a bar chart.

You can configure the line chart to display any data present in your database.

This picture shows an example bar chart:

Example bar chart

To view data values using a bar chart:

1 From the Analysis menu, point to Bar Chart, and then click New (to create a new bar chart) or the required bar chart name.

If you are creating a new bar chart, in the dialog box that appears, type a name and description, and then click OK.

2 In the Bar Chart dialog box, click the Parameter Selector button to add one or more parameters to the Bar Chart. For each parameter added, a new bar chart is displayed in the Bar Chart dialog box.



The measurements data is replayed, and displayed in the line chart window.




To Do This

Change the scale of the y-axis Right-click the y-axis scale.

From the menu that appears, click Set Y-axis Scale.

Type the minimum and maximum values, and then click OK.

To set the scale back to the original values, right-click the y-axis scale, and from the menu that appears, click Reset.

Tile the bar charts vertically Click the Tile Parameters Aligned Vertical button .

Tile the bar charts horizontally Click the Tile Parameters Aligned Horizontal button .

5 To print the bar chart results, click the Print button .

Replaying Data Using a Horizontal Grid

When you are replaying drive test measurements, you can view the data values along the drive test route using a horizontal grid. Whereas a table view is a larger, historical view of data along a drive test route, the horizontal grid gives a more compact and instantaneous view of the data at the current point/timestamp in the drive test replay.

You can configure the horizontal grid to display any data present in your database.

For example, a horizontal grid for nth detection displays all the corresponding engineering data for the particular scrambling codes that have been detected at the instance of date, time, latitude and longitude, along the drive test route.

This picture shows an example horizontal grid:

Example horizontal grid


To do this:

1 From the Analysis menu, point to Grid, and then click New (to create a new horizontal grid) or the required horizontal grid name.

If you are creating a new horizontal grid, in the dialog box that appears, type a name and description, and then click OK.

2 In the Horizontal Grid dialog box, click the Parameter Selector button to add one or more parameters to the Grid. For each parameter added, a new grid is displayed in the Horizontal Grid dialog box.



The measurements data is replayed, and displayed in the Horizontal Grid dialog box.



To Do This

Tile the grids vertically Click the Tile Parameters Aligned Vertical button .

Tile the grids horizontally Click the Tile Parameters Aligned Horizontal button .

5 To print the horizontal grid results, click the Print button .

About the Parameter Selector

You can use the Parameter Selector to:

Add parameters to charts, maps and grids

Remove parameters from charts, maps and grids

Set the parameter display style

To open the Parameter Selector from any Chart, Map or Grid window:

Click the Parameter Selector button .

The Parameter Selector opens, displaying the list of filters in the Workspace.



Parameter Selector

Moving filters into the workspace automatically evaluates the existing replay modules (both default and user) and only modules with filter-compatible parameters added to them are available for selection in the Analysis menu.

Each parameter has a coloured icon according to its status. This table describes the different options:

Icon Status

The parameter is not included in the currently open chart, map or grid.

The parameter has been added to the currently open chart, map or grid.


Adding Parameters to Charts, Maps and Grids

In the Parameter Selector, to add a parameter to a chart, map or grid:

1 Select the parameter that you would like to add. You can select multiple parameters if you want to add more than one.

To quickly locate a parameter, type the name in the Find pane and click the

Find button . The first parameter matching the criteria is highlighted, and by clicking on the Find button again you can highlight the next parameter.

2 Right-click, and from the menu that appears, click Add:

If you are using a line chart, click the Add - Chart and Info Grid option (to add the parameter to the line chart and info grid) or Add - Info Grid (to add the parameter to the info grid only) as required.

- or -

Double-click the parameter.

The parameter is added to the chart, map or grid. The parameter name appears in bold font, and the icon next to the parameter changes to blue.

3 Click Close to view the results.


Removing Parameters from Charts, Maps and Grids

In the Parameter Selector, to remove a parameter from a chart, map or grid:

1 Select a parameter that you would like to remove. You can select multiple parameters if you want to remove more than one.



2 Right click, and from the menu that appears, click Remove:

- or -

Double click on the parameter.

The parameter is removed from the chart, map or grid. The parameter name appears in normal font, and the icon next to the parameter changes to yellow.


Setting the Parameter Display Style

In the Parameter Selector, you can define the way in which parameters are displayed in the charts, maps and grids. To do this:

1 Select the parameter whose style you want to update.

2 Right-click, and from the menu that appears, click Parameter Display Style.

The Parameter Display Style window appears, showing all of the values for this parameter and the associated colours:


3 This table describes the available options:

Click To

Add Add a value.









Click OK.



4 If you want to set a series of values as the default option, select the Set as My Default option.

5 Click Apply.

If you want to undo any changes:

Click Restore to revert the values back to the original values

Click Reset to revert the values back to the default values


Viewing UE Data Using a Network Message

In RANOPT, you can view and decode user equipment data using 3GPP standards. You can use a network message to analyse W-CDMA layer 3 messages, for example NAS, RRC and so on.

To view network messages:

1 From the Analysis menu, select Signaling/Messages.

2 In the Signalling/Messages dialog box, select the required filter from the drop-down list.

Only filters that are currently in your workspace are available.

The messages for the selected filter are displayed. This picture shows an example:

You can change the columns that are displayed by clicking the Columns menu, and selecting/un-selecting columns as required.

3 If you want to display all messages of the same type in the same colour, to make them more easy to identify in a list:

Right-click one of the messages, and from the menu that appears, click Change Colour.

In the dialog box that appears, select the required colour and click OK.

If you want to revert the colour of a message type (or the colour of all message types) back to its original colour, right-click one of the messages and from the menu that appears, click Reset Colour or Reset All Colours as appropriate.

4 If you want to view a list of the message types in a separate tree, click the Select

Message to filter on button .


The list is displayed in the left-hand pane:

5 In the list of message types, select the message types that you want to display messages for, and then click Apply.

To select all of the message types, right-click in the list, and from the menu that appears, click Select All. To undo this, right-click in the list again, and from the menu that appears, click Unselect All.

6 If you want to be able to view the a decoded version of the message during replay, select the Decode Message on the Fly option. The decoded message appears on the Tree and Text tabs, in a hierarchical structure and as raw text respectively.

On both tabs, you can search for particular text strings by typing the required

string and clicking the Search button . Any results are displayed in a separate Search pane.

7 To view the first instance of a particular message type, select the message type and click the First button.

- or -

Right-click the required message type, and from the menu that appears, click First.


The list of messages moves to the first instance of the selected message type, and the decoded message appears beneath it. This picture shows an example:

8 To display the next instance of the selected message type, click the Next button.

- or -

Right-click, and from the menu that appears, click Next.

9 If you want to save the decoded message text as a file:

Click the Text tab.

Click the Save button .

In the dialog box that appears, browse to a suitable location.

Select a suitable filename and file type.

Click Save.

10 If you want to save the decoded message text to the clipboard for later use:

Click the Text tab.

Click the Save the Decoded Text to the Clipboard button . The text is copied to the clipboard.


Viewing Data Quality Analysis (DQA) Messages

In RANOPT, you can view Data Quality Analysis (DQA) messages from Rohde and Schwarz data mobiles.

To view DQA messages:

1 From the Analysis menu, point to Vendor Messages and click Rohde And Schwarz - DQA.

2 In the DQA Messages dialog box, select the required filter from the drop-down list.

Only filters that are currently in your workspace are available.

The messages for the selected filter are displayed.

You can change the columns that are displayed by clicking the Columns menu, and selecting/un-selecting columns as required.

3 If you want to view a list of the message types in a separate tree, click the Select

Message to filter on button .

The list is displayed in the left-hand pane:

4 In the list of message types, select the message types that you want to display messages for.

To select all of the message types, right-click in the list, and from the menu that appears, click Select All. To undo this, right-click in the list again, and from the menu that appears, click Unselect All.


5 To view the first instance of a particular message type, select the message type and click the First button.

- or -

Right-click the required message type, and from the menu that appears, click First.

The list of messages moves to the first instance of the selected message type.

6 To display the next instance of the selected message type, click the Next button.

- or -

Right-click the message type, and from the menu that appears, click Next.

As well as viewing DQA messages in the DQA Messages dialog box, you can plot them on the Map View.

Plotting DQA Messages on the Map View

You can plot DQA messages in the 2d View by adding the DQA parameter to a map module that is currently being displayed. The DQA parameter is added to the Miscellaneous item of the Parameter Selector.

Using the Query Variables it is possible to filter the list of displayed messages to show only the selected messages.

This picture shows an example of Data Quality Analysis (DQA) in the Map Window:

Example Data Quality Analysis (DQA) on the Map View


Using the Map View When Replaying Data

When replaying data in RANOPT, you can use the Map View window to assist you in a number of ways. You can:

Locate replay data from the Map View window

Save snapshots of the Map View window and/or the Map View Legend

Colour 2g and/or 3g cell sites

Creating text modules

Display filter comments

Zoom in on routes

Creating map modules

Locating Replay Data from the Map View Window

When you are replaying data in RANOPT, you can go from a particular point on the drive test route in the Map View to the related position in the charts, views and modules that you have created by using the Map Click option.

To do this:

1 On the Map View window toolbar, click the Enable/Disable Map Click button .

2 During the data replay, click the required point along the drive test route.

The charts, views and modules synchronise to display the data for that particular point on the drive test route.

The Map Click is disabled when the Zoom in or Zoom out button are selected.

Saving a Snapshot of the Map View

When you are using the Map View in RANOPT, you can save a snapshots of the Map View window and/or the Legend as graphic files.

To do this:

1 Click the Save a Snapshot of the 2D View as a bitmap button .

- or -

Click the Save a Snapshot of the 2D View Legend as a bitmap button .

2 In the dialog box that appears, browse to a suitable location.

3 Type a name for the bitmap file, and select the required file type (Windows bitmap, JPEG, a portable network graphic image or GIF).

4 Click Save.


Colouring 2g and 3g Cell Sites

In RANOPT, you can display cell sites in different colours according to the values of particular parameters along the drive test route.

To configure cell site colouring:

1 In the Data Types list, ensure that you have created a map module with the required parameter, and that this parameter is displayed.

For information on how to do this, see Creating Map Modules in RANOPT on page 207.

2 In the Data Types list, double-click the All filter, and in the list of data types, select the required cell site type (GSM for 2g or UMTS for 3g).

3 In the right-hand pane, click the Symbol tab, and choose an appropriate shape.

A radial enables you display different colour values for different sectors.

4 Click the Fill tab, and then:

Set the Colour option as Variable

Set it to be based on the parameter in the map module that you have chosen (for example Scrambling Code ID)

5 On the Map View Window toolbar, click the 2g Cell Site Colouring button or

the 3g Cell Site Colouring button as required.

- or -

In the Map View window, right-click and from the menu that appears, click GSM Cell Site Colouring (for 2g cell sites) or Cell Site Colouring (for 3g cell sites).


The Parameter Selector appears:

6 In the Parameter Selector, select the parameter in the map module that you have chosen. For more information, see About the Parameter Selector on page 185.

7 Click Close.

On the map view, the cell sites are displayed in different colours according to the value of the chosen parameter.


Creating Text Modules in RANOPT

In RANOPT, you can create text modules, which are groups of labels displaying parameter values on the Map View window.

To create a text module in RANOPT:

1 In the Map View window, click the Show Data Types button .

2 In the list that appears, right-click the RANOPT item, and from the menu that appears, point to Add Text module, and then click the required item:

- or -

From the Analysis Menu, click Map Text and from the menu that appears, click New.

3 In the window that appears, type in a name for the text module and a description.

To rename a text module after you have created it, in the Data Types list, right-click the text module and from the menu that appears, click Rename Module. Type the new name and then click OK.

4 Click OK.

The Map View window opens (unless it is open already).

5 On the Map View window, click the Show Data Types button .


6 Expand the RANOPT directory, and right-click the new text module:

7 Click Open Parameter Selector.

The Parameter Selector appears.

8 Use the Parameter Selector to choose the parameters that are displayed in the text module. For more information, see About the Parameter Selector on page 185.

9 Define the display properties for the text module. For more information, see Modifying the Display Properties of Text Modules on page 201.

10 To display the text module on the Map View, in the Data Types list, select the filter associated with the text module:

To remove a text module that you have created:

In the Data Types list, right-click the required text module, and click Remove Module.

The text module is removed from the Data Types list, but is still available in the Analysis menu.


You can delete all of the modules (text and map) that you have created in the Data Types list, by right-clicking the RANOPT item and from the menu that appears, clicking Remove All Modules.

Modifying the Display Properties of Text Modules

To modify the display properties of a text module that you have created:

1 In the Data Types window, expand the required text module and select the required filter.

2 Right-click, and from the menu that appears, click Properties.

- or -

Double-click the filter.

3 This table describes how you can modify the display properties for the text module:

On This Tab You Can To Do This

Parameters Re-order the display of the parameters (if the text module contains more than one parameter)

Select a parameter and click the Up and Down buttons to change its position in the list.

Modify the variables for the parameter(s). Select a parameter, and click Variables to modify the variables for this specific parameter.

For voice services you can import and export the following data fields:

ObjectIDName

ActivityProbability

MeanOnTime

Comments

When the parameter is modified, the modification will be done for the parameter in this text module only and will not alter the value of the actual parameter.

Choose the character used to separate the parameters.

Type the required parameter separator (the default option is a comma).

Font Change the format of the text as it is displayed on the Map View.

Choose a font.

Select the font style, bold or regular.

Choose the font size.

Choose a colour from the colour palette.

If required, choose any text effects, underline and/or strikeout.

Background Set a background for the text that is displayed on the Map View.

Choose the type, either Solid or Halo.

If you select Halo, a line is drawn from the label to the point on the Map View.

Select a colour from the colour palette for the background colour.

If you chose a solid background, you can select how the text is aligned horizontally and vertically, and manually define a text box if required.


Overlap Define how text is positioned on the Map View.

Select if you want overlapping text to be automatically removed.

Choose whether the text is positioned automatically according to best fit, or based on a manual positioning and offset.

Estimated Values Define how estimated values are displayed on the Map View.

Choose to calculate and display estimated values.

Choose to display:

The last known value

- or -

The last known value within a defined number of seconds

This is particularly useful if your text module contains parameters that are recorded at different points (for example, SC, EC/IO and EC are recorded at the same time, but BLER is recorded separately), but would like to keep the labels the same.

An estimated value is displayed on the map in a lighter font and actual values are displayed in bold font.

Visibility Settings Set the visibility settings. Select Always to always display the parameters on the Map View.

Select View Zoom Range and type in a minimum and maximum range for when the parameters must be visible.

Select Scale Range and type in a minimum and maximum value for when the parameters must be visible.

This example shows a text module that displays the Scrambling Code and Ec for a specific point in the Map View:

Example map text

The text module has been defined as follows:

The order of the parameters is Scrambling Code, Ec

The font is Comic Sans, regular font, font size 9, underlined and red

The background colour is solid yellow

The text is only visible when the Zoom maximum range is 1 km


As well as manually modifying the display properties of a particular text module, you can also:

Copy and paste display properties from one text module to another. For more information, see Copying and Pasting Display Properties of Text Modules on page 203.

Export and import display properties between text modules. For more information, see Exporting and Importing Display Properties of Text Modules on page 204.

Copying and Pasting the Display Properties of Text Modules

As well as modifying the display properties of text modules manually, you can copy the display properties of a particular text module and 'paste' them on to another text module.

To do this:

1 In the Data Types list, expand the required text module and select the filter containing the display properties that you want to copy.

2 Right-click, and from the menu that appears, click Copy Properties:

3 Select the filter onto which you want to 'paste' the copied display properties.


4 Right-click, and from the menu that appears, click Paste Properties:

The display properties for the selected filter are updated.

Exporting and Importing the Display Properties of Text Modules

As well as modifying the display properties of text modules manually, you can export the display properties of a particular text module to a file and import them for another text module in another database.

To export the display properties:

1 In the Data Types list, expand the required text module and select the filter containing the display properties that you want to export.

2 Right-click, and from the menu that appears, click Export Properties:

3 In the dialog box that appears, type the required path and filename.

Click the Browse button to browse to the required location.


4 Click Export.

The display properties are exported and saved as an .stt file.

To import the display properties for a text module:

1 In the Data Types list, expand the required text module and select the filter onto which you want to import the data properties.

2 Right-click, and from the menu that appears, click Import Properties:


Click the Browse button to browse to the required .stt file.

4 Click Import.


Managing Comments in the Map View Window

When using the Map View window with RANOPT, you can add comments to filters displayed on the Map View. To do this:

1 In the Map View window, right-click and from the menu that appears, point to Add Comment and select the filter to which you would like to add a comment:

2 In the dialog box that appears, type the required comment and click OK.


To view a comment in the Map View window:

1 In the Data Types list, expand the User Comments item, and select the filter for which the comment has been created:

In the Map View window, a comments (scroll) icon is displayed for each comment.

2 To see the comment, click the comments icon.

To delete a comment from the Map View Window:

1 Click the comments icon that you want to delete.

2 In the dialog box that appears, click Delete.

Zooming in on Routes in the Map View Window

If you have created a map module, text module or comments, you can zoom on the Map View to a particular point for a parameter.

To do this:

1 Right-click the required module or comment.

2 From the menu that appears, click the required option. This table describes the available options:

Click To

Zoom to Start Zoom in to the start point of the drive test route.

Zoom to End Zoom in to the end point of the drive test route.


Creating Map Modules in RANOPT

In RANOPT, you can create map modules, which enable you to display groups of parameters on the Map View Window.

To create a map module:

1 In the Map View window, click the Show Data Types button .

2 In the list that appears, right-click the RANOPT item, and from the menu that appears, point to Add Map module, and then click the required item:

- or -


From the Analysis menu, point to Map and then click the required item:

3 If you are creating a new map module, in the dialog box that appears, type a name and description for the new map module, and click OK.

The map module is added to the Data Types list. This picture shows an example:

Under the map module item, the parameters are sorted according to filter, technology and equipment. You can add additional parameters if required, for more information, see Adding and Removing Parameters in the Data Types List on page 210.

If you are creating a new map module, it does not have any parameters initially and must add them.


4 To display a particular parameter on the Map View, select the corresponding checkbox:

You can specify how the chosen parameters are displayed on the map. For more information, see Modifying the Display Properties of Map Modules on page 215.

The map modules and parameters that are displayed when you close the Map View window and/or log out of RANOPT are automatically displayed again the next time that you open the Map View window.

Tips :

You can display all of the parameters for a particular equipment, technology or map module by selecting the corresponding checkbox. In this example, all of the parameters associated with the W-CDMA handset will be displayed:

To quickly expand or collapse the list of parameters for a map module, right- click the equipment and from the menu that appears, click Expand or Collapse as required.

You can delete all of the modules (text and map) that you have created in the Data Types list, by right-clicking the RANOPT item and from the menu that appears, clicking Remove All Modules.


Adding and Removing Parameters in the Data Types List

If you have created a map module in the Data Types list, you can add and remove parameters from the available list.

To add a parameter:

1 Right-click the map module, and from the menu that appears, click Open Parameter Selector.

A slightly modified version of the Parameter Selector appears, which groups the parameters according to technology type and equipment, rather than by filter.

Only those parameters that are valid for at least one filter in the current Workspace are listed.


2 Select the parameter that you would like to add. You can select multiple parameters if you want to add more than one.




3 Right-click, and from the menu that appears, click Add:

- or -


4 Click Close.


The parameter is added to the list available for display. It appears under each filter that it is valid for, and is grouped according to its technology and equipment:

To remove a parameter:

In the list of parameters, right-click the required parameter, and from the menu that appears, click Remove Parameter.

The required parameter is removed from the Data Types list.


You can remove all of the parameters for a particular equipment, technology or map module by right-clicking the corresponding item. In this example, all of the parameters associated with the W-CDMA handset will be removed:


Removing Map Modules

If you have created a map module in RANOPT, you can remove it, or just parts of it, from the Data Types list.

If you want to remove the entire map module:

In the Data Types list, right-click the required module, and from the menu that appears, click Remove Module:

If you want to remove part of a map module:

1 Expand the required map module, and select the level that you want to delete - for example, if you want to delete a particular parameter within an equipment level, select the parameter, or if you want to delete all parameters for a particular equipment level, select the equipment level.


2 Right-click, and from the menu that appears, click Remove Parameters (or Remove Parameter for an individual parameter):

To remove all map modules:

Right-click the RANOPT item and from the menu that appears, click Remove All Modules.

Modifying the Display Properties of Map Modules

If you have created a map module, you can modify how its parameters are displayed in a number of ways. You can specify:

The physical appearance of the parameter (which symbol is used, colour and so on)

Which value for the parameter is displayed (for example, the minimum value)

To modify the display properties of a parameter in a map module:

1 In the Data Types window, expand the required map module and select the required parameter.

2 Right-click, and from the menu that appears, click Properties.

- or -



The Parameter Display Style dialog box appears:

The display properties are displayed on two tabs:

On the Style tab, you can configure the physical appearance of the parameter.

On the Variables tab, you can define which value is displayed for a parameter.

3 To apply the display properties, click Apply.

As well as manually modifying the display properties of a particular map module parameter, you can also:

Copy and paste display properties from one map module to another. For more information, see Copying and Pasting Display Properties of Map Modules on page 221.

Export and import display properties between map modules. For more information, see Exporting and Importing Display Properties of Map Modules on page 222.


Setting the Display Style of Parameters

On the Style tab of the Parameter Display Style dialog box, you can set the display style for a parameter.

To do this:

1 On the Style tab, you can configure style settings for your display properties. This table describes the options:

Click To

Add Add a value.









If you select Bin Average, the data appears in squares as per the specified size. This gives a statistical view of the average levels in different regions.

2 Select the symbol type - rectangle, triangle, circle, cross or diagonal cross.

3 Select to have a Filled or Transparent symbol.




- or -


The offset and symbol size can be used in conjunction if you have a number of parameters in your map module; you can offset each parameter and reduce the size so each one appears clearly.


If this is not selected, the legend displayed for the Map View will only contain the labels and colours that are displayed on the Map View.




8 If you want to use these display settings every time that this parameter is used in a module, select the Set as My Default option.

If you have specified individual display settings for this parameter in another module, the Set as My Default option will not replace them.

Tips :

If you want to change a parameter back to a default scheme that you have created, on the Style tab, click Reset

If you want to change a parameter back to its original system colour scheme before any default schemes were created, on the Style tab, click Restore


Setting What Values Are Displayed for Parameters

On the Variables tab of the Parameter Display Style dialog box, you can set which value is displayed for a parameter. For example, you may want to display the all of the maximum values for a parameter along a drive test route, or all of the values within a particular threshold (in order to exclude any extreme values or anomalies).

To set which value is displayed for a parameter:

1 Click the Variables tab.

The query variables that were created for the SQL statement are displayed. They define which value is displayed, based on a series of variables.

To view the description of the variable, hover the cursor over the current value of the variable in the right hand column.


In this example, the maximum value for the parameter will be displayed at each measurement point.


2 The different variable types are modified in different ways:

To modify a single value, select the right-hand column next to the variable name and type a new value.

- or -

To modify a value from a picklist range, click the Browse button in the right-hand column. From the checklist that appears, select the required value:

- or -


To modify a value from a drop-list of values, click the arrow button in the right-hand column. From the drop down list of values that appears, select the required value:

To reset the variables to their default values, click Defaults.

Copying and Pasting the Display Properties of Map Modules

As well as modifying the display properties of map modules manually, you can copy the display properties of a particular map module and 'paste' them on to another map module.

To do this:

1 In the Data Types list, expand the required map module item (module, parameter and so on) and select the filter containing the display properties that you want to copy.

2 Right-click, and from the menu that appears, click Copy Properties.

3 Select the item onto which you want to 'paste' the copied display properties.

4 Right-click, and from the menu that appears, click Paste Properties.

The display properties for the selected item are updated.


Exporting and Importing the Display Properties of Map Modules

As well as modifying the display properties of map module manually, you can export the display properties of a particular map module to a file and import them for another map module in another database.

To export the display properties:

1 In the Data Types list, expand the required map module item and select the filter containing the display properties that you want to export.

2 Right-click, and from the menu that appears, click Export Properties.


Click the Browse button to browse to the required location.

4 Click Export.

The display properties are exported and saved as an .stt file.

To import the display properties for a map text:

1 In the Data Types list, expand the required map text item and select the filter onto which you want to import the data properties.

2 Right-click, and from the menu that appears, click Import Properties.:


Click the Browse button to browse to the required .stt file.

4 Click Import.



Viewing The Speed and Direction of Filters

In the GPS Navigation dialog box, you can view the speed and direction of a specific filter.

To do this:

1 From the Analysis menu, select GPS Navigation.

2 Select the filter from the list of filters that are currently in your workspace.

3 The GPS Navigation will be displayed for the selected filter.

This picture shows an example of the GPS Navigation window:


Managing the Data Replay Windows in RANOPT

In RANOPT, you can use the Window Manager to manage your data replay windows (line charts, bar charts, grids and maps).

To open the Window Manager:

From the Analysis menu, click Windows Manager.

The Window Manager appears. This picture shows an example:

In the Window Manager you can:

Rename windows

Delete windows

Export and import windows


Renaming Data Replay Windows

In the RANOPT Window Manager, you can rename data replay windows. To do this:

1 Expand the required data replay window category, for example Bar (chart):

2 Right-click the data replay window that you want to rename.

3 From the menu that appears, click Rename/Modify.

4 Edit the name and description as required.

5 Click OK.

Deleting Data Replay Windows

In the RANOPT Window Manager, you can delete data replay windows. To do this:


2 Right-click the data replay window that you want to delete.

3 From the menu that appears, click Delete.



Exporting and Importing Replay Windows

In the RANOPT Window Manager, you can export and import data replay windows files.

To export a data replay window:


2 Right-click the data replay window that you want to export.

3 From the menu that appears, click Export Replay Window.


4 In the Default Directory box, define the default location that you want to export data replay windows, unless you specify individual paths.


5 Select the window that you want to export:

6 If you want to export the window to a directory other than the Default Directory:

Click the Browse button and locate the directory where you would like to save the exported window, which is saved as a .mod file.


Click Save.

7 Click OK.


The window is exported to the required file location.

To import a data replay window:

1 Click the Import button.

2 In the dialog box that appears, browse to the .mod file containing the replay window that you want to import.

3 Click Open:

The selected replay window is imported, and added to the list in the Window Manager.


Saving the Layout of Replay Windows on the Desktop

You can use the RANOPT Desktop Manager to save the preferred layout of a series of replay windows that you use regularly.

For more information on what data for each data replay window will be saved in the desktop, see What is Saved for Each Desktop on page 229.

To open the Desktop Manager:

1 From the Analysis menu, point to Desktops and click Desktop Manager.

The Desktop Manager appears. This picture shows an example:

In the Desktop Manager, you can:

Add and delete desktop layouts

Set a particular desktop layout to be the default on page 235, which can then be loaded again quickly

You can also modify desktops by adding additional data replay windows. For information on how to do this, see Modifying Desktops on page 235.

Adding and Deleting Desktops in the Desktop Manager

In the Desktop Manager, you can add a favourite desktop layout to the list, so that it can be re-used later.

To do this:

1 Ensure that your desktop is laid out as required, with the data replay windows in the correct positions.

For more information on what data for each data replay window will be saved in the desktop, see What is Saved for Each Desktop on page 229.

2 In the Desktop Manager, in the Desktop name pane, type a name for the new desktop.


3 Click Add.

The new desktop is added:

4 After you have created a desktop, you can make it the default option, that can be loaded again quickly. For information on how to do this, see Setting a Default Desktop on page 235.

To delete a desktop:

1 Select the desktop that you want to delete.

2 Click Delete.

The selected desktop is removed.

What is Saved for Each Desktop

When you save a number of data replay windows as part of a desktop, the following data is saved for each.

Bar Charts

For bar charts, the following details are saved:

Dimensions of the data replay window (top, left, height, width)

How the charts are tiled (horizontal or vertical)

The number of parameters

For each parameter

The dimensions of the window (top, left, height, width)

The position of the vertical splitter bar

The position of the horizontal splitter bar


The scale (Minimum, Maximum and Total (absolute value of the minimum value))


Example Bar Chart

Table Views

For table views, the following details are saved:


Whether the Enable Cell Colouring option has been selected or not


Example Table View


Line Charts

For line charts, the following details are saved:


Column sizes for the Legend, and the events that are selected


Example Line Chart

Signalling/Messages Data

For Signalling/Messages data, the following details are saved:


The selected filter ID

Whether the Decode message on the fly option has been selected or not

Whether the filter panel is displayed or not

The width of the splitter between the filter and the messages panels

The height of the splitter between the messages list and the decoded messages tree

The number of visible columns

The name and width of the column

The number of selected nodes in the filter tree

The index of each selected node in the filter tree



Example Signalling/Messages data

Vendor Messages (DQA) Data

For vendor messages (DQA) data, the following details are saved:



Whether the filter panel is displayed or not

The width of the splitter between the filter panel and the messages panel

The number of columns

The name and width of each column



Example DQA Messages data

GPS Navigation Dialog Box

For the GPS Navigation dialog box, the following details are saved:

Dimensions of the window (top, left, height, width)



Example GPS Navigation Dialog Box


Map View Window Replays

For the Map View Window Replays, the following details are saved:

The number of all open Map View windows

The dimensions of all open Map View windows

Zoom areas of all open Map View windows

The currently loaded RANOPT Analysis modules

The selection state (i.e. checked or not-checked) of both ENTERPRISE and RANOPT map layers (v5.2.2 and higher only)



Setting a Default Desktop

In the Desktop Manager, if you have created a desktop, you can make it the default, which means that it can be loaded again quickly when you open RANOPT. To do this:

1 From the list of desktops, select the desktop that you want to make the default.

2 Click Default.

If the chosen desktop is currently loaded, it is displayed in blue, otherwise it is displayed in red:

To clear the status of all of the desktops, click Reset.

Modifying Desktops

If you have loaded an existing desktop, you can modify it by adding extra open windows to it. To do this:

1 From the Analysis menu, point to Desktops and click:

Save - if you want to save the new layout with the same name as the currently loaded desktop

- or -

Save As - if you want to save the new layout under a new name.

2 If you chose the Save As option, in the dialog box that appears, type the name of the new desktop and click OK.

The new layout is saved as required.


Loading Desktops

If you have saved your favourite desktop layouts in the Desktop Manager, you can re-load them at any time.

To do this:

From the Analysis menu, click the required option:

Load Default Desktop (if you have set a desktop as the default)

- or -

The name of the required desktop:


Using the Workspace and Database Explorer

This chapter describes how to:

Use the Workspace to manage commonly-used filters

Use the Database Explorer to analyse the result files that have been loaded into the database

In This Section

Using the Workspace 237 Using the Database Explorer 240

Using the Workspace

You can use the RANOPT Workspace to manage up to ten of your most commonly-used filters within RANOPT.

You can:

Add/remove filters to/from the workspace

Make filters active and inactive

Reload measurement data for filters

Synchronise filters

To open the Workspace:

On the RANOPT toolbar, click the Workspace button .

- or -

From the Tools menu, click Workspace.

The Workspace dialog box appears, with the name of the logged in user displayed in the title bar.

C H A P T E R 8


This picture shows an example of the Workspace window:

If you move the cursor over a filter in the Workspace, an information window appears, describing the contents of the filter:

The filter name

The equipment type used

The technologies used

Any snapshots that are included

Any data manipulation techniques that are included

The drive test files included

From the Workspace, you can quickly view a filter in the Filter Manager. To do this, right-click the required filter, and from the menu that appears, click Locate in Filter Manager.

Adding and Removing Filters for the Workspace

You can quickly add commonly used filters to the RANOPT Workspace, so that you can manage them more easily from there. To add a filter to the Workspace:

1 In the Filter Manager, select the filter that you want to add to the Workspace.

2 From the menu that appears, click Include into Workspace:

- or -

Drag-and-drop the filter into the Workspace window.


The chosen filter is added to the Workspace. In the Filter Manager, the filter is labelled with the letter 'w' to indicate that it is included in the Workspace:

To remove a filter from the Workspace:

1 In the Workspace, select the filter that you want to remove.

2 Right-click the filter, and from the menu that appears, click Remove.

- or -

Click the Remove Filter button .

The filter is removed from the Workspace. However, it is still present in the Filter Manager.

Making Filters Active and Inactive

In the RANOPT Workspace, filters can be either active or inactive.

The first filter that you add to the Workspace becomes Active by default, but you can change this if you have more than one filter in the Workspace. You can make up to three filters active at any one time.

To make a filter active:

Right-click the required filter and from the menu that appears, click Make Active:

The filter becomes active, and is displayed in a bold font.

To make a filter inactive:

Right-click the required filter and from the menu that appears, click Make Inactive.


Reloading Measurement Data for Filters in the Workspace

In the RANOPT Workspace, you can reload the measurement data for a selected filter.

To do this:

1 Select the filter for which you want to reload measurements.

2 Click the Reload button .

The measurement data for the selected filter is reloaded.

Synchronising Filters in the Workspace

In the RANOPT Workspace, you can synchronise data that has been collected from handsets and scanners.

You can synchronise any combination of handset and scanner files (for example, two scanner files or two scanner files and a handset file) and any number of filters from the Workspace. The data is synchronised when you close the Workspace.

You can only synchronise one group of filters at any one time. After two or more filters have been synchronised, selecting another filter in the Workspace breaks the synchronisation. The change takes effect when you close the Workspace.

Using the Database Explorer

You can use the RANOPT Database Explorer to analyse the drive test files that have been loaded into the database. You can:

View summary information of the files

Delete files from the database

Reload the file data from the database

To open the Database Explorer if you are logged into RANOPT:

In RANOPT, from the Tools menu, click DB File Explorer.

- or -

Click the DB File Explorer button .

To open the Database Explorer if you are not logged into RANOPT:

1 From the Start button, point to Programs, AIRCOM International, ENTERPRISE 6.1, Misc, then click RANOPT Database Explorer.

2 In the dialog box that appears, enter a username and password then select a database from those shown in the list.

3 Click OK.


The Database Explorer opens:

The information is displayed on two tabs:

The Drive-Test File Explorer tab manages all the drive test files that have been loaded

The Load Progress Monitor tab monitors the parsing and loading of the drive test files


About the Drive-Test File Explorer

In the RANOPT Database Explorer, on the Drive-Test File Explorer tab, you can:

View the drive test files

Delete drive test files

Reload data from the database

This picture shows an example Drive-Test File Explorer tab:

Example Drive-Test File Explorer tab

You can define where the Database Explorer should retrieve the drive test files, and how often to check for updates to the drive test files. For more information, see Defining the Database Explorer Settings on page 242.

Defining the Database Explorer Settings

In the RANOPT Database Explorer Settings dialog box, you can set how often RANOPT should check for new drive test files, and which server to check.

To do this:

1 Click the Change Settings button .

- or -

From the Edit Menu, click Settings.

2 If you want to schedule the Database Explorer to check the database for new drive test files, select the checkbox, and type the interval in seconds (for example, every 5 seconds or every 15 seconds).


3 In the RANOPT DCOM Message Server pane, type the name or IP address of the RANOPT server which has the database that you want to check.

This picture shows an example of the settings:

The database on the 'localhost' server will be checked for new files every 5 seconds.

4 Click OK.

Viewing the Drive Test Files

In the RANOPT Database Explorer, on the Drive-Test File Explorer tab, you can view a list of the drive test files that have been loaded, or are being loaded. These files are displayed in blue, and the text next to the filename indicates the loading progress.

When you load a drive test file, each device in the file is listed as a separate sub-entity, which means they can be manipulated (viewed, deleted, used in filters and so on) separately, or as part of a group.

This table describes the information that is shown for each item:

If You Select This Item You Can View

A drive test file The name of the drive test file

The number of devices in the file

The size of the drive test file

Summary details for each device contained in the file (name, network, equipment type, technology)

A device in a drive test file The name of the device

The status of the device (The date when it was loaded or a comment if not successfully loaded/busy loading)

The date and time the file was logged

The import type

The network

The start latitude

The start longitude

The end latitude

The end longitude

Beneath the file details is a separate Comments field, which can be edited at any time (even during the loading of the data files).


Setting How the File List Is Displayed on the Drive-Test File Explorer Tab

In the RANOPT Database Explorer, you can define how the drive test file list is displayed on the Drive-Test File Explorer tab. For example, you can choose to sort the files based on the network, the import source, date loaded, technology type and so on. This picture shows a series of drive test files organised by technology:

Drive test files organised by technology

If you change the sort order here, it will also change the sort order in the Filter Criteria file list. For more information on this, see Creating Filters in RANOPT on page 136.

To define the sort order:

1 Click the Sort and Order Drive Test File Explorer button .

The Table Sort dialog box appears. The left-hand list contains the information options and the right-hand list details the order in which they are sorted.


If you choose to order the file list by file size, in the File Size Grouping pane, you can specify the file size range. Files are then displayed in groups according to this range. For example, if the file size grouping is set to be 15MB, the files are arranged in groups 0-15MB, 16-30MB, 31-45MB and so on.

2 To select an option to be displayed, click the required option and then click the

right direction button .

To remove an option from the display list, select it and then click the left

direction button .

3 To order the list, you can move the options up and down by clicking the required

option and then clicking the up and down direction buttons.

4 When you have included all of the information options and defined the correct order, click OK.

Deleting the Drive Test Files

In the RANOPT Database Explorer, on the Drive-Test File Explorer tab, you can delete old or unwanted drive test files. To do this:

1 In the list of drive test files, select the file(s) that you want to delete.

To delete a set of files from a specific group (for example, load date, equipment or file size), select the required group. You can also select individual devices within a particular drive test file.

2 Click the Remove Button .

- or -

Right-click, and from the menu that appears, click Remove File(s).

- or -

From the File Menu, click Remove File(s):


You can set the sort order of the file list to make deleting files easier. For example, if you want to quickly delete all of the files associated with a particular network, you can sort the file list based on network, select the network containing the files you want to delete and click the Remove button.


Reloading Data from the Database

In the RANOPT Database Explorer, on the Drive-Test File Explorer tab, you can reload data from the database. To do this:

Click the Refresh button .

- or -

From the View Menu, click Refresh.

About the Load Progress Monitor

In the RANOPT Database Explorer, on the Load Progress Monitor tab, you can check the parsing and loading of files into the database.

You can select any file that is parsed and loaded, and view useful data on that file, for example, whether the file was parsed successfully, or details of any errors that occurred during the parsing and/or loading of a file.


RANOPT Database Explorer Progress Monitor

You can save the load progress information as a text file, to be viewed outside of RANOPT. For information on how to do this, see Saving Load Progress Messages on page 247.


Saving Load Progress Messages

On the Load Progress Monitor tab, to save load progress messages as a text file:

1 Click the Save Progress Messages button .

2 In the dialog box that appears, browse to a suitable location.

3 Type an appropriate file name and click Save.

The Progress Messages are saved into a text file.



Using the RANOPT Task Scheduler

You can use the RANOPT Scheduler to set certain tasks to execute at regular intervals. Tasks can be scheduled to execute just once, daily, weekly, and so on.

Tasks are grouped into jobs, which contain all of the scheduling information.

To open the RANOPT Scheduler:

From the Start button, point to Programs, AIRCOM International, ENTERPRISE, Misc, then click RANOPT Scheduler.

In the dialog box that appears, specify the location for the log files associated with the scheduler.

You only have to do this once. If you want to change it later, you can open the Options dialog box from the Tools menu.

C H A P T E R 9


The Scheduler appears. This picture shows an example:

As well as creating jobs and tasks in the RANOPT Scheduler, you can view information for jobs and tasks:

The last time that the task was run

The end time when the task was last run

The duration of the task when it was last run

The next scheduled run time (for jobs only)

In This Section

Creating Jobs in the RANOPT Task Scheduler 251 Creating Tasks in the RANOPT Scheduler 253 Modifying and Deleting Jobs and Tasks 261 Changing the Order of Tasks in Jobs 261 Running Jobs 261


Creating Jobs in the RANOPT Task Scheduler

A job is a group of tasks that can be run in the Task Scheduler. The job contains all of the scheduling information for the tasks within it - how often they will be run, the date and time that they will be run, and so on.

Jobs can contain more than one task of the same task type.

To create a job:

1 Click the Create Job button .

- or -

From the Tools menu, click Create Job.

The Create New Job dialog box appears:

2 Type a name and description for the job.


3 To define the timing of the task:

Select the Enable option.

In the Run pane, select how often you want to the task to run.

In the Start at pane, select the date and time that you want to start running the task.

If you have set the task to run once, this is date and time that the one-off task will be executed.

4 In the Database Details pane, type the details of the database that you want to connect to.

5 Click OK.


Creating Tasks in the RANOPT Scheduler

To create a task in the RANOPT Scheduler:

1 Select the job to which you want to add the task.

You must have created a job before you can create a task.

2 Click the New Task button .

- or –

From the Tools menu, click New Task.

The task dialog box appears:

The dialog box will be different, depending on the task type selected.

3 From the menu, choose the required task type.

This table describes the available task types:

This Task Does This

File Load Automatically loads selected drive test files into RANOPT.

Filter Creation Automatically creates (and applies) new filters based on the files available in the database.

Report Running Automatically runs selected reports on selected filters.


4 Each task type has different attributes to configure, so see the appropriate topic for the next set of steps:

Configuring File Load Tasks on page 254

Configuring Filter Creation Tasks on page 257

Configuring Report Running Tasks on page 259

5 When you have configured the task(s) correctly, click OK.

6 To ensure that the folder for the log file of the jobs is defined correctly:

From the Tools menu, click Options

In the dialog box that appears, specify the path for the log files:

Click OK

A log file stores the actions and progress of tasks in a job. In the specified folder, RANOPT creates a subfolder with the same name as the job, and further subfolders for each task in the job.

7 You are now ready to run your task.

Configuring File Load Tasks

In the RANOPT Scheduler, you can create File Load tasks, which automatically load selected files into RANOPT. It does this by copying files from a specified folder and pasting them into a specified imports folder, where the loader/parser can load them into RANOPT.

For more information on how files are loaded into RANOPT, see Loading Drive Test Files on page 75.

To configure a loading files task that you have created:

1 In the File Loader Machine box, type the name of the machine on which the parser/loader is stored. This should match the location specified in the Database Explorer settings.

Although you may run the task later, it is worth checking that the parser/loader service is currently running, to save time later. To do this, click the

Refresh button . The Parser Status should be Running.

2 In the File Location pane, specify the path to the machine (or a folder on a machine) that contains the folders containing drive test files that you want to load into RANOPT. You can either type the name, or navigate to it in hierarchy displayed in the left-hand pane.


To see the drive test files in these folders, click the folder name. The files are displayed in the lower pane:

3 In the Import Folder pane, you can view the Import directory, into which the files will be loaded, from where they will be processed by the parser/loader.

This directory is defined in the RANOPT Administrator, so if it needs to be changed, click Cancel and contact your administrator.

The available import folders in this directory are displayed beneath the directory, in the right-hand pane:

The processing folders (in, out and err) are not listed in this pane.

4 To define which drive test files should be moved to which imports folder:

In the left-hand pane, select the folder containing the drive test file(s).

Still holding the mouse button, drag the folder onto the required import folder in the right-hand pane. You must choose a network-level folder.

Although the processing folders are not listed, as part of this task, the drive test files will be moved to the in folder for parsing/loading.

Release the mouse button to drop the folder.


If you make a mistake, you can undo this by right-clicking the folder and clicking Remove. You can also re-arrange folders in the right-hand pane by dragging and dropping them.

You can add more than one drive test file folder to the same imports folder.

When the task is run, only files with the correct extension (as defined in the RANOPT Administrator) will be copied to the import folder.

This picture shows an example File Load Task:

In this example, files contained in the Drive Test Files folder on the C drive of the host machine will be loaded into the RanoptImports folder from where they will be parsed and loaded into RANOPT:

Drive test files from the Drive 1 folder will be loaded into the in folder of Nemo Handset/Network A

Drive test files from the Drive 2 folder will be loaded into the in folders of Nemo Handset/Network A and Nemo Scanner/Network A

Drive test files from the Drive 3 folder will be loaded into the in folder of Nemo Handset/Network A

5 Click OK to save the task.


Configuring Filter Creation Tasks

In the RANOPT Scheduler, you can create Filter Creation tasks, which automatically create new filters based on the criteria that you set and the files available in the database, and then applies them in sequence.

To configure a filter creation task that you have created:

1 Right-click in the Filter List pane, and from the menu that appears, click Create Filter.

The Filter Criteria Wizard appears:

2 Using the Filter Criteria Wizard, specify the criteria for your filter. When the filter is applied, any available drive test files that match the filter criteria will be included.

Most of the wizard is the same as the one used in the Filter Manager, however the General tab is slightly different.

3 On the General tab, to filter the files based on times and dates:

Select whether you want to filter based on the time/date that the file was logged or the time/date that the file was loaded.

If you want to filter based on a specified start time and/or end time of the drive test file, select the appropriate Enable option.

If you do not enable the start time, then the filter will include all of the drive test files from the start of the database to the end time (if this is specified). If you do not enable the end time, then the filter will include all of the drive test files from the start time (if this is specified) to the time that the job start.


To specify a fixed date and time, select the Fixed option and set the appropriate date and time.

To specify a relative date and time based on the time that the job starts, select the Relative option and specify how close to the job start date/time you want to include drive test files.

4 To filter the files based on the equipment type, in the Equipment pane, select:

Scanner only to include only Scanner results in the filter

Handset (UE) only to include only UE results in the filter

If you do not select either option, both scanner and handset results will be included.

5 To filter the files based on technology type, in the Technology pane, select the required technology types, for example, W-CDMA or GSM/GPRS.

6 The rest of the filter criteria tabs are the same as those in the Filter Manager. For more information, see Selecting the Log Files to be Included in Filters.

7 As well as creating new entirely filters, you can also set existing filters to be applied when this task is run. To do this:

Right-click in the Filter List pane, and from the menu that appears, click Add Existing Filter

In the dialog box that appears, select the filter that you want to add and click OK.

8 If you schedule this task after a Loading Files task, you can create filters based on the files that you have just loaded. To do this, ensure that the Include Files from Job checkbox is selected.

If you are creating a number of filters using this task, you may want to organise them in folders. To do this:

In the Filter List pane, right-click, and from the menu that appears, click Create Folder

Type a name for the folder, and then press Return

You can now drag and drop the filters you have created into this folder


Configuring Report Running Tasks

In the RANOPT Scheduler, you can create Report Running tasks, which automatically generate selected reports for selected filters.

To configure a non-benchmarking report running task that you have created:

1 In the Report List pane, select the report(s) that you want you generate.

Tips :

To select more than one report, click each report while holding down the Shift button.

To select all of the reports, right-click in the pane and from the menu that appears, click Select All.

If you want to generate reports for filters that will be created by an earlier Filter Creation task in the job, select the Scheduled Filters option:

2 In the Filter List pane, select the filter for which you want to generate the report.

Tips :

To select more than one filter, click each filter while holding down the Shift button.

To select all of the filters, right-click in the pane and from the menu that appears, click Select All.

3 Click the 'Build tree from selected report modules and filters' button .

You can also select reports and filters, drag them across to the middle pane, and drop them into place - for example, to add a report and filter, drag the report into the middle pane, then drag and drop the filter for which you want to generate the report onto the report.

4 The report and filter are moved to the middle pane:

You can choose how the hierarchy of reports and filters is displayed - by filter or by report. In the example above, the hierarchy is displayed by filter, listing all of the reports that will be generated for that filter underneath it. This is the best view if you are generating a large number of reports for just a few filters. However, if you are generating just a few reports for a large number of filters, you can change this to display by report, which will list all of the filters for which the report will be generated underneath it, by clicking the 'Toggle the hierarchical

relationship between report modules and filters' button .

5 Continue to add filters and reports as required.


6 When you have added all of the filters and reports for the task, click OK.

When the report is run, each report is run on each filter in turn.

There are a number of ways to configure a task to run benchmarking reports:

Based on a Non-benchmarking Report

If you have set up a non-benchmarking report to be generated for a particular filter, you can convert this to a benchmarking report. To do this:

1 In the middle pane, select the report that you want you generate as a benchmarking report.

The chosen report must be compatible for benchmarking, by having the Enable Benchmarking option selected. For more information, see Creating Reports on page 122 and Modifying and Deleting Reports on page 124.

2 Click the 'Build tree from selected report modules and filters which are

benchmarking enabled' button .

This will be indicated with a red 'B':

- or -

1 In the Report List pane, select the report that you want you generate as a benchmarking report, which should be the same as the one displayed in the middle pane.

2 Drag and drop it into the middle pane.

3 In the dialog box that appears, click Yes to add the report as a benchmarking report.

Where No Non-benchmarking Report is Available

To create a benchmarking report without using a non-benchmarking report:

1 In the Filter List pane, select the filter for which you want to run the benchmarking report.

2 In the Report List pane, select the report that you want to generate as a benchmarking report.

The chosen report must be compatible for benchmarking, by having the Enable Benchmarking option selected. For more information, see Creating Reports on page 122 and Modifying and Deleting Reports on page 124.

3 Click the 'Build tree from selected report modules and filters which are

benchmarking enabled' button .


Modifying and Deleting Jobs and Tasks

In the RANOPT Scheduler, you can modify and delete jobs and tasks.

To modify a job or task:

1 Select the job or task that you want to modify.

2 Click the Modify button .

3 Edit the job or task as necessary.

If your job contains a filter creation task based on relative start/end times, and you edit the start time of the job, then will have an impact on the contents of the filters that are created.


To delete a job or task:

1 Select the job or task that you want to delete.

2 Click the Remove button .


Changing the Order of Tasks in Jobs

In the RANOPT Scheduler, you can change the order in which tasks are run. To do this:

1 Select the task you want to move within the list.

2 Holding down the mouse button, drag the task to the required position in the list.

3 Drop the task by releasing the mouse button.

Running Jobs

In the RANOPT Scheduler, you can run jobs that you have created. To do this:

1 Select the required job.

2 Click the Run button .

- or -

From the Tools menu, click Run.

The job runs as defined - the tasks within the job are run individually, with the tasks running in the specified order.



Troubleshooting The RANOPT Installation

This chapter describes troubleshooting checks that you can use within RANOPT.

In This Section

Troubleshooting the TEMS Parser 263 Troubleshooting the Database Explorer 265

Troubleshooting the TEMS Parser

If the ranopt_FileLoader.exe is running but:

It is not using any CPU

rt_Explorer (RANOPT Database Explorer) only shows the parser version

Then you should:

1 Check that you have the following folders in the %systemroot%\WinSxS\ folder:

x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_cbb27474

x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700

x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_3bf8fa05

x86_Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_91481303

2 Check that you have the following folders and files in the %systemroot%\WinSxS\Policies folder:

x86_policy.8.0.Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_x-ww_5f0bbcff

8.0.50727.762.cat

8.0.50727.762.policy

x86_policy.8.0.Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_x-ww_77c24773

8.0.50727.762.cat

8.0.50727.762.policy

x86_policy.8.0.Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_x-ww_0f75c32e

8.0.50727.762.cat

8.0.50727.762.policy

C H A P T E R 1 0


x86_policy.8.0.Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_x-ww_caeee150

8.0.50727.762.cat

8.0.50727.762.policy

3 Check that you have the following files in the %systemroot%\WinSxS\Manifests folder:

x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_cbb27474.cat

x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_cbb27474.manifest

x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd.cat

x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd.manifest

x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_3bf8fa05.cat

x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_3bf8fa05.manifest

x86_Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_91481303.cat

x86_Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_91481303.manifest

4 If one of the folders or files listed above is missing, download and install the visual studio c++ runtime for visual studio from http://www.microsoft.com/downloads/details.aspx?familyid=200B2FD9- AE1A-4A14-984D-389C36F85647&displaylang=en http://www.microsoft.com/downloads/details.aspx?familyid=200B2FD9-AE1A-4A14-984D-389C36F85647&displaylang=en.

5 If the runtime environment is intact, use regsvr32 to re-register the following DLLs in the %programfiles%\AIRCOM International\ENTERPRISE x.x\RT Loader directory:

CDMA.dll

CellNameTool.dll

EventInfoManager.dll

FilemarkManager.dll

GPS.dll

LogContentsManager.dll

LogfileSeqReader.dll

Mss.dll

MssGsm.dll

MssGsmUL.dll

MssPsqm.dll

MuMCAClient.dll

MumcaRtpSourceFilter.dll

MumcaRtsp.dll

PinPoint.dll

TEMSCore.dll

TEMSLogfileManager.dll

TEMSRouteReader.dll

TEMSSystem.dll

VSQI1.dll

http://www.microsoft.com/downloads/details.aspx?familyid=200B2FD9-AE1A-4A14-984D-389C36F85647&displaylang=en

http://www.microsoft.com/downloads/details.aspx?familyid=200B2FD9-AE1A-4A14-984D-389C36F85647&displaylang=en


Troubleshooting the Database Explorer

If you are using RANOPT with Windows 2003 Service Pack 1 or older, you should follow these steps to ensure that the status monitor in the Database Explorer can be viewed easily. There are two stages:

Turn off the firewall (this section can be ignored if you do not have a firewall)

Configuring the DCOM security settings

You should configure the the machine that is running the file parser service (in other words, the file loader machine).

Turning off the Firewall

To turn off the Windows Firewall:

1 Ensure that you are logged on as a user with administrative rights.

2 Click Start and select Control Panel.

3 You will have one of two control panels. Click the Security Center icon.

4 Click the Windows Firewall icon beneath the status updates.

5 Click Off (not recommended), and then click OK

6 After turning off the Windows Firewall, you will get the following warning message: "Your computer may be at risk; No firewall is turned on".

This error will continue to appear in the system tray until you tell Windows that you realise the Firewall is turned off. To do this, continue to with the steps below.

7 Click the balloon, or the red shield in the system tray, and from the menu that appears, click Recommendations.

8 Select the "I have a firewall solution that I'll monitor myself" checkbox. This will stop Windows from alerting that there is a risk.

9 Click OK.

A warning that Windows will not monitor your firewall settings appears. You can close this dialog box.


Configuring the DCOM Security Settings

To configure the DCOM Security Settings:

1 Ensure you are logged on as a user with administrative rights.

2 From the Start menu, click 'Run'.

3 In the dialog box that appears, type 'dcomcnfg', and then click OK.

4 In the Component Services dialog box that appears, expand the Component Services node, then expand the Computers and 'DCOM Config' sub-nodes.

The 'status monitor' node should now be accessible. This picture shows an example:


5 Right-click this node, and from the menu that appears, click Properties. The StatusMonitor Properties dialog box appears. This picture shows an example:

6 Click the Security tab, and in the Launch and Activation Permissions pane, select the customise radio-button.


7 Click the Edit button. The Launch Permission dialog box appears:

You can configure the launch permissions in different ways, depending on your setup:

If the ENTERPRISE installation is published via Citrix, then you can specify the network user group

If users are logging on directly to the database via the network, then you can specify a network user group or individual users

If a variety of users have access to the database and you do not know which users will logon to the machine, you should add 'ANONYMOUS LOGON' to the list of permitted users

If the users will remotely access the service, then you should select the Remote Launch and Remote Activation permissions

8 Click OK, and then OK again, to save all changes.

9 In the Component Services dialog box, expand the Component Services node, then expand the Computers sub-node.


10 Right-click 'My Computer', and from the menu that appears, click Properties. The MyComputer Properties dialog box appears. This picture shows an example:

11 Click the COM Security tab, and in the Access Permissions pane, click the Edit Limits button.


12 In the dialog box that appears, set the same permissions as you did in Step 5:

13 Click OK.

14 In the Launch and Activation Permissions pane, click the Edit Limits button.

15 In the dialog box that appears, set the same permissions as you did in Step 5, and then click OK.

16 Repeat steps 11-15 for any Citrix machines or client machines that are running Windows 2003 Service Pack 1.


RANOPT Export Plans

Export plans contain the procedures used to extract data from third party data collection tools and convert it into the required format for RANOPT.

Export plans must be adhered to, as an incorrect export plan can result in files not being loaded correctly into RANOPT.

In This Section

Exporting Data from NEC 271 Exporting Data from TEMS 272

Exporting Data from NEC

To export data from NEC:

1 Open the NEC Log Viewer.

2 From the File menu, click Open.

3 Select the log file that needs to be converted to txt format, and click Open.

The log file opens.

4 From the File menu, click Save.

5 Type a name to describe the file.

6 In the 2nd File field, select the text file (*.txt) option from the drop-down list .

7 Click the Property button and in the Save type options, ensure the Analyse & Hex option is selected.

8 Leave the other options on their default settings, and then click OK.

9 Click Save to save the log file as a text file.

A P P E N D I X A


Exporting Data from TEMS

To export data from TEMS:

1 Open the TEMS investigation application.

2 From the Logfile menu, click Export Logfile.

The Export Logfile Window opens.

3 Click Add Order.

4 In the dialog box that appears, click Setup.

5 In the dialog box that appears, click the Information Elements tab.

6 Browse to find the TEMS ASCII export text file and click Open.

7 Click Load to load the RANOPT export plan that you want to use during the export.

8 When the 'Unable to open import archive' message appears, click OK.

9 Click OK again.

10 In the Add Export Order dialog box, select the Text file for the Format field.

11 In the Input files field, browse to locate the log file that you want to export.

This automatically creates the output directory for you, but you can choose an alternative location if you prefer.

12 Type .FMT (default) as the Extension field. Leave all other fields (Prefix, Suffix) empty and click OK.

The entry is added in the Export Logfile window and is ready for export.

13 Add the other files required for export in the same way.

14 When you are ready to export, from the list of files, right-click the file(s) you want to export.

To select all of the files in the list, select the first file, and on the toolbar, click the Start (Shift+S) button.

15 From the menu that appears, click Start.

The selected files are exported, starting from the top of the list and working downwards.

The .fmt log files are exported to the export directory defined in step 11.

When you are exporting data for Tems 6.0 and Tems 6.1, an FMT export file and a text file are created using the export plan:

The FMT file contains all the measurements

The text file contains a dump of all the Layer 3 messages recorded during the drive test

Both of these files must be submitted for loading, because the parser will open the FMT file and search for the corresponding text file. If this cannot be found the TEMS file cannot be loaded.


RANOPT Supported File Formats

To make the Agilent Sd5 loader work, you must install the Dimlogger.dll and SharedString.dll, which are part of the Agilent Nitro package.

To do this, you can:

Install the entire Agilent Nitro software, which will copy and register the dlls

- Or -

Copy the required dlls, Dimlogger.dll and SharedString.dll.

Important :

You must register these two dlls (using REGSVR32.EXE) before the files will load successfully.

You must register the SD5 software dll for Agilent SD5 files to be imported

RANOPT supports the following file formats:

File Format File Extension Technology

Agilent E6474a 5.0.0 txt WCDMA




Agilent E74xx txt WCDMA

Agilent E74xx V09_02 txt WCDMA

NEC ASKA 5.0.0 txt WCDMA

NEC ASKA 6.1.6 txt WCDMA

Nemo 1.70 dt?, ds? WCDMA and GSM/GPRS/EDGE

Nemo 1.71, dt?, ds? WCDMA and GSM/GPRS/EDGE






A P P E N D I X B


TEMS 96 fmt GSM

TEMS 98 fmt GSM

TEMS GSM V0.0 fmt GSM

TEMS Investigation WCDMA V1.0 fmt WCDMA


TEMS Investigation WCDMA V1.1.1 fmt WCDMA









TEMS Investigator GSM V3.2 fmt GSM


TEMS Investigator GSM V4.0.3 fmt GSM



TEMS Investigator GSM V5 fmt GSM


TEMS Investigator GSM V6 fmt GSM




Glossary of Terms

2

2D

Two Dimensional.

2G

Second generation wireless telephone technology.

3

3G

Third generation wireless telephone technology.

3GPP

Third Generation Partnership Project. A group of previously separate telecommunication standards bodies, responsible for producing technical specifications for 3g systems and maintaining GSM standards.

A

ASCII

American Standard Code for Information Interchange.

B

BCCH

Broadcast Control channel. This is a logical channel used for signalling purposes.

BSIC

Base Station Identity Code. A combination of colour codes (NCC and BCC) used in GSM that provide extra identity information to help a mobile to distinguish individual transmitters. This allows handovers between cells, even if both cells are using the same frequency channel.


C

CD

Compact Disc.

CDMA2000

CDMA2000 is a 3g mobile telecommunications standard. It offers backward compatibility with IS-95, and the two systems may be run together in the same bandwidth. A defining feature of the CDMA2000 standard is the support for different services such as Voice, Internet and Video.

CGI

Cell Global Identifier.

CI

Cell Identity.

CSV

Comma-Separated Values. A type of data format in which each piece of data is separated by a comma.

D

DB

Database.

dBm

The ratio in decibels (dB) of measured power referenced to one milliwatt (mW).

dll

Dynamic Linked Library.

DQA

Data Quality.

DVB-H

Digital Video Broadcasting - Handhelds.

DVB-T

Digital Video Broadcasting - Terrestrial.


E

Ec

Energy per Chip.

Ec/Io

Signal Quality ratio for 3g technologies. This measurement includes intra-cell interference (whereas the SIR value excludes intra-cell interference).

EDGE

Enhanced Data rates for GSM Evolution. Method of achieving higher data rates in GSM by using 8PSK modulation. This is used, for example, in EGPRS.

G

GIS

Geographic Information System. A computer system designed to handle geographical information.

GPRS

General Packet Radio Service. This is a non-voice service, which allows you to send and receive data across a mobile telephone network via GSM telephones. The typical data transmission rate is 20-30 Kbps, and there is continuous connection to the network.

GPS

Global Positioning System.

GSM

Global System for Mobile Communications. A global 2g wireless digital communications standard covering cellular telephony, two-way radio and paging, and short messaging. It is a TDM system, operating on 3 frequency bands - GSM 900 (900 MHz), DCS 1800 (1.8 GHz) and PCS 1900 (1.9 GHz).

H

HSDPA

High Speed Downlink Packet Access. Represents an evolution of the WCDMA radio interface for data services, using methods similar to the EDGE evolution of the GSM radio interface. The higher data rates are achieved by Adaptive Modulation and Coding.

HTML

Hypertext Markup Language.


J

JPEG

Joint Photographic Experts Group. A compressed image file of the format defined by this group.

L

LAC

Location Area Code.

M

MCC

Mobile County Code.

MNC

Mobile Network Code.

N

NAS

Non Access Stratum.

P

PDF

Portable Document Format.

PSTN

Public Switched Telephone Network. This is the traditional public telephone system, comprised of telephones, local and interexchange trunks, transport equipment and exchanges.

Q

QoS

Quality of Service. A performance requirement that is defined prior to the transmission of data. Depending on the network type, it can be measured in terms of bit error rate, cell loss ratio, cell transfer delay and so on.


R

RNCID

Radio Network Controller Identity.

RRC

Radio Resource Control.

S

SC

Scrambling Code.

SQL

Structured Query Language. SQL is an ANSI and ISO standard computer language for getting information from and updating a database.

U

UARFCN

UTRA Absolute Radio Frequency Channel Number.

UCID

UMTS Cell Identifier.

UE

User Equipment.

UMTS

Universal Mobile Telecommunications System. A 3g mobile telecommunications standard, which can deliver broadband data at speeds of 2Mbps. A defining feature of the UMTS standard is the support for different services such as Voice, Internet and Video.

UTRA

UMTS Terrestrial Radio Access.


W

W-CDMA

Wideband Code Division Multiple Access. A standard derived from CDMA (Code Division Multiple Access) technology, which is suitable for 3G mobile wireless technology.

X

XML

Extensible Markup Language.


Index

A

about • 133, 168 Administrator, about • 60 Analysing

data • 69 Analysis

line charts • 180 map modules • 207

Automatic network detection, enabling • 35

B

Background charts, creating • 104 Bar charts, creating • 97

C

Cell Site Colouring • 197 Cell sites, resolving • 75 Cell/Site snapshots

using in filters • 145 Charts

creating • 96, 97, 99, 101, 104 line • 99, 180 viewing • 64

checklist • 119 Colour range maps, creating • 106 Continuous range parameters, creating • 88

D

Data exporting • 171, 173 loading • 75, 78, 79, 83 viewing • 237

Data loading, troubleshooting • 83 Data manipulation techniques • 37

creating • 37 deleting • 41 editing • 41 using in filters • 144

Data sessions, viewing • 151 Database Explorer

about • 68 deleting files • 245 monitoring load progress • 246 reloading data • 246 settings • 242 sorting the file list • 244 using • 240

Databases

logging in • 24 Desktops (Root)

loading • 236 managing • 72

Discrete image list parameters, defining • 90 Discrete numeric range parameters, defining • 89 Displaying

map modules • 215 Drive test data

adding to filters • 139 deleting • 245 loading • 75, 79 monitoring load progress • 246 refreshing • 246 sorting in the Database Explorer • 244 viewing • 243

Drive-Test File Explorer tab, about • 242

E

Equipment about • 60 deleting • 30 editing • 30 splitting • 27

Event charts, creating • 101 Exporting

data • 173

F

File Load Wizard, about • 63 Files

loading • 63, 75 monitoring load progress • 246

Filter Manager, about • 62 Filters

about • 62 adding polygons to • 143 adding to the Workspace • 146 applying • 147 colour of filter icons • 135 deleting • 145 editing • 145 managing • 62, 148 quick polygon • 149 refreshing • 152 selecting measurement files for • 139 using data manipulation techniques in • 144 using snapshots in • 145

G

Grids creating • 113, 115

H

Horizontal grids, creating • 113

I

Image maps, creating • 109


L

Line charts, creating • 99 Line maps, creating • 111 Load progress messages, saving • 247 Load Progress Monitor, about • 246 Loading

data • 75, 79 process • 78 troubleshooting • 83

Log Files deleting • 245 managing • 242 viewing • 243

M

Map modules adding parameters to • 210 creating • 207 display properties • 215 removing • 214

Map Text creating • 199

Map View displaying parameter data on • 207

Maps creating • 109, 111 creating colour range • 106 creating image • 109 creating line • 111

Measurement data adding to filters • 139 deleting • 245 monitoring load progress • 246 refreshing • 246 reloading in the Workspace • 240 sorting in the Database Explorer • 244 viewing • 243

Messages about • 54 clearing • 55 configuring • 26 loading • 55 viewing • 54

N

NEPTUNE Analyser, about • 13 Network operators

about • 33 creating • 34 deleting • 36 editing • 36

Networks splitting • 36

O

Offsets creating • 169 modifying • 170

P

Parameter display styles, setting • 217 Parameters

adding to map modules • 210 bar charts • 97 continuous range • 88 copying • 92 creating • 87 discrete image list • 90 discrete numeric range • 89 display properties • 215, 217, 221, 222 event charts • 101 exporting • 93, 94 grids • 113 importing • 96 line charts • 99 maps • 106 reports • 131 variables • 219

Polygons adding to filters • 143

Q

Quick polygon filters, creating • 149

R

RANOPT Administrator about • 23 using • 23

RANOPT Lite • 13 RANOPT Server • 12 RANOPT Standard • 13 Refreshing

filters • 152 Registry reports

about • 121 Replay positioning, about • 73 Replaying

data • 68, 179, 183, 184 drive-test measurements • 178 using line charts • 180

Reports creating • 122 exporting • 125, 127 importing • 125 parameters • 131 registry • 65 SQL statements for • 129

Rules adding • 160 Manager • 67, 159 sets • 159

S

Scheduler creating tasks • 253

Sessions list, viewing • 151 Snapshots

Manager • 66 using in filters • 145


Speed control, about • 72 SQL Custom Queries

adding query variables • 119 format • 96 statements for reports • 129

Symbols used in Help/Guide • 15

T

Table views, creating • 117 Tablespaces

about • 55 registering • 56

Tasks creating • 253 editing • 261

Templates creating strings • 31, 33

Toolbars RANOPT • 59

U

Users deleting • 52 editing • 52 management • 47

V

Vertical grids, creating • 115

W

Windows organising • 71

Workspace about • 61 adding filters • 146


Date post:	13-Apr-2015
Category:	Documents
Upload:	syed-yawer-imam
View:	57 times
Download:	7 times

RANOPT User Reference Guide.pdf

Documents