www.resemin.com

RAPTOR 44 XPProduction long hole rig for small sections

RAPTOR 44 XP is an electro-hydraulic rig for long hole drilling, It has an hydraulic boom, 4AP model, with automatic parallel holding.

8000 series, Long Hole Feed, with 2 Stingers and hydraulic motor and chain style. BARYCENTRE system to synchronize automatically the drilling and rotation axes; this system facilitates the drilling of radial and parallel holes with reduced times for positioning. Equipped with a Montabert Drifter HC 95 with 22 kW and Back –Hammering rods extractor, the most modern rock drill in the market.

Chassis for heavy duty application, articulated 4WD, self-propelled with Deutz diesel motor, Poclain hydrostatic transmission and electro hydraulic system for drilling.

Applications:

• Sub level and benching.• Block Caving.• VCR and Cable Bolting application.

www.resemin.com

Raptor 44 XP Technical specifications

SPECIFICATIONS

DRIFTER• Model• Percussion Power• Percussion pressure• Frequency Percussion• Rotation speed• Rotation Torque• Hole diameter• Rhymed diameter• Maximum drilling length • Lub air consumption• Lub oil consumption• Water consumption• Shank Adapter• Weight• Length with shank

Montabert, HC9522 kW

180 Bar68 Hz

0 - 270 rpm750 Nm

51 - 89 mm75 - 127 mm

to 35 m6 l/s (a 2.5 bar)

0.8 cc/min3 - 4 l/s (to 9 bar)

T38, T45, Male185 kg

1162 mm

FEED• Model• Advance drilling• Feed extension• Hydraulic clamp• Standard Feed• Options• Three Stinger to stabilize while

drilling• Rod Handling • Options• Digital inclinometer for measuring

angles

RE 8000 SeriesHydraulic motor and chain

400 mmBull 1204 ft rods3, 5 rods

10 + 1 Rods14 + 1 Rods

Transtronic

BOOM• Model• Automatic parallelism• Boom Extension• Angle lift• Swing angle• Rotation angle• Hydraulic cylinders

Boom 5 AP - C

1000 mm+65°/ -20°

± 30°360°

Parker

CARRIER• Model• Diesel Engine• Power• Exhaust catalyst• Transmission• Transmission Pump• Hydrostatic Motor• Rear axle Oscillating• Positioning pump• Service brakes• Emergency and parking

brakes • Tyres• Steering (articulated carrier)• Hydraulic jacks • Battery• Electric system• Gradeability • Tramming Speed

• Canopy• Tramming lights• Centralized Lubrication

System• Drilling Lubrication System• Automatic fire suppression

system• Fire extinguisher• High-pressure washing

system• Reel grease gun

C44.2

Deutz BF4L91472.4 kW @ 2300 rpm

StandardHydrostatic

Saur DanfosPoclain

± 8°Parker, P315 B

SeparateSAHR (Spring Applied

Hydraulic Release)10.00 x R15

±41°2 extendable front, 2 rear

2x12 V, 90 Ah24 VDC

15%Flat - 11 kph15% - 7 kph

FOPS / ROPS8X, Halógeno 65W HD, 24 V

SKFSKF

ANSUL, 6 nozzles 1x6kg, Type ABC

OPTION• Compresor AC, GA 30

180 cfm @ 110 psi • Magazine RH 14 for 14+1 rods• Feed

On board

For 3 and 5 feet

www.resemin.com

Raptor 44 XP Technical specifications

HYDRAULIC CONTROL SYSTEM• Direct Control Valve

• Percussion pump (compensated pressure)

• Rotation Pump • Work pressure• Hydraulic oil tank• Hydraulic return filter• Hydraulic high filter • Saturation hydraulic filter

indicator • Indicator of low oil• Indicator temperature oil

Montabert Intelsense II, Parker K18

Rexroth A10V0100

Parker PG315180 bar

130 lParker, 10μParker, 20μ

ParkerHydacHydac

WATER AND AIR SYSTEM• Compressor• Maximum capacity• Work pressure• Water pump with hydraulic

motor• Maximum flow at 8 Bar• Minimum inlet pressure• Cooler Thermal Transfer

AC, GA3084 l/s (178 cfm)

9.1 Bar

Grundfoss, CR5 - 96.9 m3/h

2 BarEK 1018T, 80 GPM, 34 Bar

ELECTRIC SYSTEM• Electric motor• Voltage• Frecuency• Starting method• Option to 1000 VAC• Overload protection and

ground fault• Percussion hour meter• Phase sequence indicator• Battery charger• Electric transformer• Work Lights• Electric wire reel• Electric wire• Protection degree

ABB - 75kW / 100 HP380 - 440 - 550 - 690 -1000 VAC

50 - 60 HzStar - DeltaDirect start

Schneider, Module VIGIIn the control panel

Siemens32 VAC, 300W, 13A

3,5 kVA2X, LED N44, 50W, 6700 lm, 24 V

90 m3X1/0 - AWG (50mm)

IP 55

BARICENTER SYSTEM• Shorter times for Boom positioning since both drilling and

rotation axis are syncronized.• Enables to use only two Trasducers for Digital Inclinometer

instead of five from competitors.• Speeds up the operation and productivity of the machine.

www.resemin.com

Raptor 44 XP Technical specifications

DIMENSIONS

Total Weight 11,620 Kg.

COVERAGE AREA TURN RADIO

OPTION: With compressor for flushingR

ev. 1

6071

2

©C

opyr

ight

201

6 R

ES

EM

IN. S

peci

ficat

ions

and

equ

ipm

ent a

re s

ubje

ct to

cha

nge

with

out f

urth

er n

otic

e.