RA/SE/GT/GS/LA/SF TRIM€¦ · RH – Right Hand LH – Left Hand RHR – Right Hand Reverse LHR...

(Version: 2015.6) RA/SE/GT/GS/LA/SF TRIM

UNISON HARDWARE, INC.

How to order……………………………………………………………

Roses and Plates Escutcheons…………………………………………

Lever Designs and Finishes……………………………………………

Tubular Latch Set………………………………………………………

Tubular Entry Set………………………………………………………

Tubular Latch……………………………………………………………

Privacy Bolt……………………………………………………………

Deadbolt & Rim Cylinders………………………………………………

Exploded Diagram……………………………………………………

Care and Maintenance…………………………………………………

Product Warranty………………………………………………………

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6-7

Page 8

Page 9

Page10-14

Page 15

Page 16

TABLE OF CONTENTS

Disclaimer: All information in this catalog has been deemed accurate as of the date of printing. We are continuously improving and expanding our line in an effort to offer our clients the finest quality products and services. Therefore, Unison Hardware, Inc. reserves the right to alter this information or correct printing errors at any time. C 2015 Unison Hardware, Inc. All Rights Reserved.

STANDARD STOCK ITEM:

How to OrderFor leversets using the same interior and exterior lever and finish combination:

Product IdentificationSF 105 L61-32D-LH

RA RoseSE RoseGT RoseGS Rose LA PlateSF Plate

Lever:101 Cologne102 Munich103 Oslo104 Brussels105 Frankfurt106 Copenhagen107 Stockholm108 Vienna109 Stuttgart210 Air-stream211 Breeze213 Cabernet214 Champagne217 Horizon221 Aurora223 Phoenix225 Waterfall226 Summer227 Stratus243 Sunrise244 Twilight251 Sequoia311 Crest344 Ecco345 Tokyo346 Osaka351 Toronto379 Arctic (GT/GS)380 Polaris (RA/SE/LA/SF)

Handing*:RH – Right HandLH – Left HandRHR – Right Hand Reverse LHR – Left Hand Reverse* Specify for half passage, passage w/ privacy bolt and entry functions.Finish:

32D = Satin Stainless Steel 32 = Polished Stainless SteelSP = Two Tone Satin and Polished Stainless Steel10B = Oil Rubbed Bronze on Stainless Steel

Function:Tubular LatchL61 = Tubular Latch, Passage with TL2 Latch, 2-3/8” BacksetL62 = Tubular Latch, Privacy with TL2 Latch, 2-3/8” BacksetL65 = Tubular Latch, Half Passage with TL2 Latch, 2-3/8” BacksetL66 = Tubular Latch, Passage with TL2 Latch and Privacy Bolt, 2-3/8” Backset (For LA, SF only)L71 = Tubular Latch, Passage with TL2 Latch, 2-3/4”BacksetL72 = Tubular Latch, Privacy with TL2 Latch, 2-3/4” BacksetL75 = Tubular Latch, Half Passage with TL2 Latch, 2-3/4” BacksetL76 = Tubular Latch, Passage with TL2 Latch and Privacy Bolt, 2-3/4” Backset (For LA, SF only)

L461 = Tubular Latch, Passage with TL4 Latch, 2-3/8” BacksetL462 = Tubular Latch, Privacy with TL4 Latch, 2-3/8” BacksetL465 = Tubular Latch, Half Passage with TL4 Latch, 2-3/8” BacksetL466 = Tubular Latch, Passage with TL4Latch and Privacy Bolt, 2-3/8” Backset (For LA, SF only)L471 = Tubular Latch, Passage with TL4 Latch, 2-3/4”BacksetL472 = Tubular Latch, Privacy with TL4 Latch, 2-3/4” BacksetL475 = Tubular Latch, Half Passage with TL4 Latch, 2-3/4” BacksetL476 = Tubular Latch, Passage with TL4 Latch and Privacy Bolt, 2-3/4” Backset (For LA, SF only)

DL = Dummy Single LeftDR = Dummy Single RightDP = Dummy Pair (Lower Lever Position) (For LA,SF only)MDP=Dummy Pair (Higher Lever Position) (For LA,SF only)

Tubular Latch and Deadbolt ComboC63 = Combo Deadbolt and TL2 Latch, 2-3/8” Backset, Single CylinderC73 = Combo Deadbolt and TL2 Latch, 2-3/4” Backset, Single CylinderC463 = Combo Deadbolt and TL4 Latch, 2-3/8” Backset, Single CylinderC473 = Combo Deadbolt and TL4 Latch, 2-3/4” Backset, Single CylinderC64 = Combo Deadbolt and TL2 Latch, 2-3/8” Backset, Double CylinderC74 = Combo Deadbolt and TL2 Latch, 2-3/4” Backset, Double CylinderC464 = Combo Deadbolt and TL4 Latch, 2-3/8” Backset, Double CylinderC474 = Combo Deadbolt and TL4 Latch, 2-3/4” Backset, Double CylinderEDP = Dummy Entry with Dummy Cylinder

01

Version: 2015.6 TUBULAR LOCKSETS

Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com

TUBULAR LOCKSETS Version: 2015.6

02

Roses and Plates Escutcheons

2-1/2"(63mm)

2-1/16"(53mm)

2-1/16"(53mm)

7/16"(11mm)

1-11/16"(43mm)

13/32"(10mm)

1-1/2"(38mm)

5/16"(8mm)

1-1/2"(38mm)

2-3/8"(60mm)

7/16"(11mm)

1-11/16"(43mm)

10-1/2"(267mm)

7/16"(11mm)

2-1/2"(63mm)

10-1/2"(267mm)

7/16"(11mm)

2-1/2"(63mm)

LA Plate(Tubular Passage, Privacy)

LA Plate(Tubular Entry)

RA Rose

SE Rose

GT Rose

GS Rose

SF Plate(Tubular Passage, Privacy)

SF Plate(Tubular Entry)

10-1/2"(267mm)

7/16"(11mm)

2-1/2"(63mm)

10-1/2"(267mm)

7/16"(11mm)

2-1/2"(63mm)


5-37/64"(142mm)

3-5/64"(78mm)

5-37/64"(142mm)

3-5/64"(78mm)

7-3/16"(182.7mm)

1-15/32"(37.3mm)

7-3/16"(182.7mm)

1-15/32"(37.3mm)

Version: 2015.6

03

TUBULAR LOCKSETS

Finish

· Satin Stainless Steel · Bright Polished Stainless Steel · Two-tone Stainless Steel · Oil Rubbed Bronze on Stainless Steel US32D/630 US32/629 SP( Satin on Lever Grip; 10B/613

Polished on Lever Neck and Roses)


Lever Designs and Finishes

101 Cologne (32, 32D)

102 Munich (32, 32D)

103 Oslo (32, 32D) 104 Brussels (32, 32D) 105 Frankfurt (32, 32D, 10B) 106 Copenhagen (32, 32D, 10B)

107 Stockholm (32, 32D) 108 Vienna (SP*)

109 Stuttgart (32, 32D)

210 Air-stream (32, 32D, 10B) 211 Breeze (32, 32D, 10B) 213 Cabernet (32, 32D)

214 Champagne (32, 32D, 10B) 217 Horizon (32, 32D) 221 Aurora (32, 32D, SP*, 10B) 223 Phoenix (32D, SP*) 225 Waterfall (32, 32D)

226 Summer (32, 32D) 227 Stratus (32, 32D) 243 Sunrise (32, 32D, 10B)

244 Twilight (32, 32D)

251 Sequoia (32, 32D, SP*) 311 Crest (32, 32D, 10B)

344 Ecco (32, 32D) 345 Tokyo (32, 32D)

346 Osaka (32, 32D)

351 Toronto (32, 32D) 379 Arctic (32, 32D)

*SP is a two-tone stainless steel finish: satin (32D) finish on lever grip, polished (32) finish on lever neck and roses.379 Arctic knob are available for GT/GS small rosette and BP/MU plates. 380 Polaris knobs are available for RA/SE rosette, LA/SF plates and Entrance Handlesets.

380 Polaris (32,32D)

Lever Designs with “Return To Door” (RTD)**Compliant with California Fire Code

04

Functions: Non-Keyed Lock

Passage (L61/L71/L461/L471)Both levers always unlocked.

Privacy (L62/L72/L462/L472)Push privacy pin from inside to lock door.Unlock latch by turning inside lever or by emergency release from hole on outside rose cover.

Full Dummy - LA,SFMDP (Higher Lever Position)Both levers are inactive.

Half Dummy Left (DL) or Half Dummy Right (DR)Left or Right levers are always inactive.Optional working dummies available by specifying “WORKING”.

Half Passage (L65/L75/L465/L475)Outside lever always unlocked, inside dummy rose.Used on pantry/closet without space for inside lever.*Do NOT use this function on pantry/or closet that couldlock a person or pet inside.

GT Privacy Set RA w/ GR Privacy Set SF Privacy Set

Passage with Privacy Bolt- RA,SE,GT,GSCombination of a passage set with an additional Privacy Bolt ordered separately.Please See Page 8 for Privacy Bolt details.

Passage with Privacy Bolt- LA,SF (L66/L76/L466/L476)Combination of a passage set with privacy bolt.

Application

For residential interior doors with passage, privacy, or dummy application.

Material

Stainless Steel Levers and Escutcheons

Specification

· Door Thickness: 1-3/8” (35mm) to 1-3/4” (44mm) Thick Door Kits Available· Latch Backset: 2-3/8” (60mm) standard 2-3/4” (70mm) optional· Latch: Available for both TL2 and TL4 Latch· Handing: Field reversible latch for passage and privacy function. Specify handing for half passage and passage w/ privacy bolt function· Hub and Spindle: 5/16 (8mm) square· Latch Faceplate: 1”x2-1/4” standard square corner· Latch Strike: Full lip strike and T-strike with square corners. Radius corner faceplate and strike, or ASA Strike also available. Order separately.· Leverset Thru-bolts: 2 EA M4x35mm

Door Preparation

Standard Prep (*except for GT) GT Series Prep

LA/ SF Privacy Set Prep

Please go to: www.inoxproducts.com/resources for the latest door preparation templates and installation instructions.

Tubular Latch Set

TUBULAR LOCKSETS


Version: 2015.6

Functions

Entry w/ Single Cylinder (C63/C73/C463/C473)Deadbolt is locked or unlocked by key or thumb-turn inside. When deadbolt is unlocked, both levers operate latch like a passage set. Deadbolt and latch are not interconnected.

Entry w/ Double Cylinder (C64/C74/C464/C474)Deadbolt is locked or unlocked by key. When deadbolt is unlocked, both levers operate latch like a passage set. Deadbolt and latch are not interconnected.

Dummy Entry (EDP) (Lower Lever Position)Both levers are inactive. Dummy cylinder is inactive.

Dummy Pair (DP) (Lower Lever Position)Both levers are inactive.

Door Preparation

Please go to: www.inoxproducts.com/resources for the latest door preparation templates and installation instructions.

ApplicationFor residential entry doors application.

Material

Stainless Steel Levers and Escutcheons

Finish

. Satin Stainless Steel US32D/630

. Bright Polished Stainless Steel US32/629

· Two-tone Stainless Steel SP( Satin on Lever Grip; Polished on Lever Neck and Roses)

· Oil Rubbed Bronze on Stainless Steel 10B/613

*See page 3 for finish availability.

Specification

· Door Thickness: 1-3/8" (35mm) to 1-3/4" (44mm) Thick Door Kits Available· Backset: 2-3/8" (60mm) standard 2-3/4" (70mm) optional· Center Distance: 5-1/2" (140mm)· Handing: Specify handing for all functions. Latchbolt is field reversible.· Hub and Spindle: 5/16 (8mm) square· Latch Faceplate: 1"x2-1/4" standard square corner· Latch Strike: Full lip strike and T-strike with square corners. Radius corner faceplate and strike, or ASA Strike also available. Order separately.· Schlage C Keyway 5-pin Cylinder, 2 keys included. Keying service available.· Leverset Thru-bolts: M4x35mm· Deadbolt Thru-bolts: 2 EA M5x50mm for Single Cylinder 2 EA M5x70mm for Double Cylinder

Tubular Entry Set

05

1" dia25mm

2-1/8"54mm

2-3/8"60mm1"

25mm

2-1/4"57mm 5-1/2"

140mm

2-1/4"57mm

1"25mm

TUBULAR LOCKSETS


Version: 2015.6

Tubular Latch

TL4 – Commercial Grade (BHMA/ANSI156.2 Grade 2)

28 Degree Latch RetractionBackset: 2-3/8” (60mm), 2-3/4” (70mm)Function: Passage, PrivacyFaceplate: 1”x2-1/4”

Backset Function Item No.

2-3/8” (60mm) Passage TL461

2-3/8” (60mm) Privacy TL462



Tubular Latch

TL2- Residential Grade

45 Degree Latch RetractionBackset: 2-3/8” (60mm), 2-3/4” (70mm)Function: Passage, Privacy, DummyFaceplate: 1”x2-1/4”






2-3/8” (60mm) Dummy TL260

2-3/4” (70mm) Dummy TL270

Change Latch Bolt Direction For TL2 Latch

TL2 Latch45 degree retraction latch

Take out the latch and turn 180o

Dummy Latch Kit for Pre-Drill Doors


2-3/8” (60mm) Dummy Kit PPD-RSL6

2-3/4” (70mm) Dummy Kit PPD-RSL7

Change Latch Bolt Direction For TL4 Latch

2-61/64"(75mm)3-3/8"(85mm)

2-3/8"(60mm)2-3/4"(70mm)

TL4 Latch28 degree retraction latch

Determine door handing for latch and remove INSIDE washer ( privacy pin side ).Change the latch direction 180° with the faceplate together .Note: Be sure to install the latch with faceplate attached to the latch body.

Note: Make sure the center line on the back of the faceplate meets the center seam of the latch case.

Note: Make sure the latch has the Arrow facing up.

06

TUBULAR LOCKSETS


Version: 2015.6

Privacy Pin

All privacy latches come with M4 Privacy Pin and Emergency Release Key

M4 Privacy Pin

Emergency Release Key

Latch Bracket/ Stablizer

For 1-3/8” and 1-3/4” Door Thickness

TL2 Latch Bracket (For RA/SE/LA/SF) BRIX22F & BRIX22M

TL4 Latch Bracket (For RA/SE/LA/SF)BRIX40F & BRIX40M

Pre-Rose Lever Designs

Certain lever designs have non-release rose cover where additional special allen wrench and hexagon bolts are provided.Designs include: 106 Copenhagen, 214 Champagne, 251 Sequoia, 344 Ecco, 379 Arctic, 380 Polaris, 243 Sunrise

Ways to install leverset with non-release rose cover

* keep the protective film on the lever while mounting the fixings

Strikes

All latches come with both T-Strike and Full-lip Strike with square corners. Full-lip Strike with Radius Corner and ASA Strike can be ordered seperately.

Full-lip Strike Full-lip Strike ¼” CornerLSR-D1 LSR-D141-3/4”x2-1/4” 1-3/4”x2-1/4”

T- Strike ASA Strike (ANSI Standard)LSR-T1 LSR-ASA1-1/8” x 2-3/4” 1-1/4”x4-7/8” w/lip 1-1/2”x1/2”

07

Use a phillips screwdriverto go through rose cover center cut out

Use allen wrench to go through rose cover center cut out

Use allen wrench in between rose cover and under-construction.

TUBULAR LOCKSETS


Version: 2015.6

Functions

Privacy Deadbolt Deadbolt locked and unlocked by inside thumb-turn or outside emergency release

Item No. Description

GT04PB62W Privacy Bolt with GT Rose, 04 T-turn, 2-3/8” Backset, With Indicator

GT04PB72W Privacy Bolt with GT Rose, 04 T-turn, 2-3/4” Backset, With Indicator

GT04PB62 Privacy Bolt with GT Rose, 04 T-turn, 2-3/8” Backset

GT04PB72 Privacy Bolt with GT Rose, 04 T-turn, 2-3/4”Backset


GS04PB62W Privacy Bolt with GSRose, 04 T-turn, 2-3/8” Backset, With Indicator

GS04PB72W Privacy Bolt with GS Rose, 04 T-turn, 2-3/4” Backset, With Indicator

GS04PB62 Privacy Bolt with GS Rose, 04 T-turn, 2-3/8” Backset

GS04PB72 Privacy Bolt with GS Rose, 04 T-turn, 2-3/4”Backset


GR04PB62 Privacy Bolt with GR Rose, 04 T-turn, 2-3/8” Backset

GR04PB72 Privacy Bolt with GR Rose, 04 T-turn, 2-3/4” Backset

SR04PB62 Privacy Bolt with SR Rose, 04 T-turn, 2-3/8” Backset

SR04PB72 Privacy Bolt with SR Rose, 04 T-turn, 2-3/4”Backset

Privacy Bolt

· Door Thickness: 1-3/8" (35mm) to 1-3/4" (44mm)· Backset: 2-3/8" (60mm) or 2-3/4" (70mm)· Privacy Bolt: 1/2" (12.7mm) throw· Privacy Bolt Spindle: 3/16" (5mm) square· Standard Faceplate: 1" x 2-1/4" Square Corners· Strike: 1" x 2-1/4" Square Corner

Backset Item No.

2-3/8” PB162

2-3/4” PB172

Rose Options with T-turn & Release

GT Rose GT Rose GT RoseT-Turn Side Release only Release w/Indicator

GS Rose GS Rose GS Rose T-Turn Side Release only Release w/Indicator

GR Rose GR RoseT-Turn Side Release Side

SR Rose SR Rose T-Turn Side Release Side

Door Preparation

GT/GS Prep GR/SR Prep

Please go to: www.inoxproducts.com/resources for the latest door preparation template and installation instructions.

08

TUBULAR LOCKSETS


Version: 2015.6

09

Deadbolt

Backset: 2-3/8” (60mm), 2-3/4” (70mm)Deadbolt: 1" (25mm) throw with anti-drill pinFunction: Suitable for entry door or doors needing to be lockedFaceplate: 2-1/4” x 1”Cylinder & Keys: 5-pin Schlage C keyway cylinder with 2 keys

Backset Item No.2-3/8” BT1602-3/4” BT170

Deadbolt Strike and Faceplate

Deadbolt Faceplate Deadbolt Strike w/ reinforcement plate and dustbox

BT1-FSP LSR-BT1

Rim Cylinders

Schlage C Keyway, 5 Pin, with Tailpiece, 2 Keys.Standard Keyed Different (KD).Other Keying Services Available.

Single Cylinder CRB105

Double Cylinder CRB105F & CRB105HF

Dummy Cylinder CRA10D

Cylinder Escutcheon Thumb-turn EC-R460COL TT-04C

EC-S420COL

TUBULAR LOCKSETS


Version: 2015.6

Exploded Diagram ( RA Passage)

1. Outside Rose Cover2. Outside Lever3. Outside Sub-rose w/Bolt Sleeve4. Outside Latch Bracket 5. Spindle 8mm Square6. Inside Latch Bracket7. Inside Sub-rose8. Inside Lever9. Inside Rose Cover10. Thru-Bolts11. Set Screw for Lever12. Tubular Latch-TL2 Passage13. Tubular Latch Faceplate14. Tubular Latch Faceplate Screws15. Tubular Latch Strike Screws16. Tubular Latch Strike17. Tubular Latch Dust Box

Exploded Diagram ( RA Half Dummy)

1. Dummy Spindle2. Wood Screws3. Sub-rose4. Lever5. Rose Cover6. Wood Screws 7. Set Screw for Lever

1

2

3

4

5

78

9

10 11

12

13

15

16

14

17

6

1

23

4

6

5

7

Exploded Diagram ( RA Privacy)

1. Outside Rose Cover2. Outside Lever3. Outside Sub-rose w/Bolt Sleeve4. Outside Latch Bracket 5. Spindle 8mm Square6. Inside Latch Bracket7. Inside Sub-rose8. Inside Lever9. Inside Rose Cover10. Privacy Pin11. Thru-bolts12. Set Screw for Lever13. Tubular Latch-TL2 Privacy 14. Tubular Latch Faceplate15. Tubular Latch Faceplate Screws16. Tubular Latch Strike Screws17. Tubular Latch Strike18. Tubular Latch Dust Box

Exploded Diagram ( RA Half Passage)

1. Inside Blind Rose Cover 9. Outside Lever2. Thru-bolts 10. Outside Rose Cover3. Inside Sub-rose 11. Set Screw for Lever4. Inside Latch Bracket 12. Tubular Latch Faceplate Screws5. Tubular Latch-TL2 Passage 13. Tubular Latch Strike Screws6. Spindle 8mm Square 14. Tubular Latch Strike7. Outside Latch Bracket 15. Tubular Latch Dust Box8. Outside Sub-rose 16. Tubular Latch Faceplate

1

2

35

6

8

13

1415

17

18

10 11

97

16

12

4

10

Tubular Latch Set

TUBULAR LOCKSETS


Version: 2015.6

6

128

16

1314

13

5

9

15

10

11

2

7

4

Tubular Latch Set

Exploded Diagram ( GT Passage)

1. Inside Rose Cover2. Inside Lever3. Inside Sub-rose4. Tubular Latch-TL2 Passage 5. Spindle 8mm Square6. Outside Lever7. Outside Rose Cover8. Bolt Sleeves9. Tubular Latch Faceplate10. Tubular Latch Strike Screws11. Tubular Latch Dust Box12. Tubular Latch Strike13. Tubular Latch Faceplate Screws14. Set Screw for Lever15. Thru-Bolts

Exploded Diagram (GT Half Dummy)

1. Rose Cover2. Wood Screws3. Lever4. Sub rose5. Set screw for lever

Exploded Diagram (GT Privacy)

1. Inside Rose Cover2. Inside Lever3. Inside Sub-rose4. Tubular Latch-TL2 Privacy 5. Spindle 8mm Square6. Outside Lever7. Outside Rose Cover8. Bolt Sleeves9. Tubular Latch Faceplate10. Tubular Latch Strike Screws11. Tubular Latch Dust Box12. Tubular Latch Strike13. Tubular Latch Strike Screws14. Set Screw for Lever15. Thru-Bolts16. Privacy Pin

Exploded Diagram (GT Half Passage)

1. Outside Rose Cover 9. Inside Blind Rose Cover2. Bolt Sleeves 10. Tubular Latch Faceplate3. Thru-bolts 11. Tubular Latch Strike Screws4. Outside Sub-rose 12. Tubular Latch Dust Box5. Spindle 8mm Square 13. Tubular Latch Strike6. Tubular Latch-TL2 Passage 14. Tubular Latch Faceplate Screws7. Inside Sub-rose 15. Set Screw for Lever8. Outside Lever

11

TUBULAR LOCKSETS


Version: 2015.6

4

3

5

6

7

8

12

9

14

13

12

11

10

15

Exploded Diagram (GT Privacy Bolt)

1. Inside Rose with Thumb-turn2. Spindle Sleeve 3. Privacy Bolt4. Spindle 5mm Square5. Privacy Release Sub-rose6. Privacy Rose Cover7. Thru-Bolts8. Privacy Bolt Dust Box9. Privacy Bolt Strike10. Privacy Bolt Strike Screws11. Privacy Bolt Faceplate Screws12. Faceplate of Privacy Bolt

Exploded Diagram (GR Privacy Bolt)

1. Thumb-turn2. Privacy Rose Cover3. Wood Screws4. Inside Less Cover 5. Privacy Bolt6. Outside Sub Cover with release 7. Outside Rose Cover8. Privacy Bolt Dust Box9. Privacy Bolt Strike10. Privacy Bolt Strike Screws11. Privacy Bolt Faceplate Screws12. Faceplate of Privacy Bolt13. Thumb-turn Washer14. Set Screw for Thumb-turn

12

Tubular Latch Set

TUBULAR LOCKSETS


Version: 2015.6

Exploded Diagram (LA Passage)

1. Outside Lever 10. Tubular Latch Dust Box2. Bolt Sleeves 11. Tubular Latch Strike3. Outside Cover Plate 12. Tubular Latch Strike Screws4. Outside Sub-plate 13. Tubular Latch Faceplate Screws5. Latch Bracket 14. Tubular Latch Faceplate6. Inside Sub-plate 15. Tubular Latch-TL2 Passage 7. Thru-Bolts 16. Lever Spindle 8mm Square8. Wood Screws 17. Set Screw for Lever9. Inside Cover Plate

Exploded Diagram (LA Dummy)

1. Outside Lever2. Outside Cover Plate3. Outside Sub-plate4. Inside Sub-plate5. Wood Screws6. Inside Cover Plate7. Set Screw for Lever

Exploded Diagram (LA Privacy)

1. Inside Lever 10. Tubular Latch Dust Box2. Inside Cover Plate 11. Tubular Latch Strike3. Wood Screws 12. Tubular Latch Strike Screws4. Inside Sub-plate 13. Tubular Latch Faceplate Screws5. Latch Bracket 14. Tubular Latch Faceplate6. Lever Spindle 8mm Square 15. Tubular Latch-TL2 Privacy 7. Outside Sub-plate 16. Set Screw for Lever8. Outside Cover Plate 17. Thru-Bolts9. Bolt Sleeves 18. Privacy Pin

Exploded Diagram (LA Passage with Privacy Bolt)

1. Outside Lever 12. Strike Screws2. Outside Cover Plate With Sub-rose 13. Privacy Bolt Strike3. Privacy Bolt 14. Privacy Bolt Dust box4. Inside Lever 15. Tubular Latch Dust Box5. Inside Sub-plate 16. Tubular Latch Strike6. Thru-Bolts for Sub-plate 17. Faceplate Screws7. Inside Cover Plate 18. Faceplate of Tubular Latch8. Thumb-turn Washer 19. Tubular Latch-TL2 Passage9. Thumb-turn 20. Latch Bracket10. Set Screw for Thumb-turn 21. Lever Spindle 8mm Square11. Faceplate of Pricacy Bolt 22. Set Screw for Lever

13

Tubular Latch Set

TUBULAR LOCKSETS


Version: 2015.6

14

Tubular Entry Set

Exploded Diagram (LA Entry with Single Cylinder)

1. Keys 17. Deadbolt Dust Box 2. Outside Rim Cylinder 18. Deadbolt Reinforcement w/ Tailpiece Plate Screws3. Outside Cover Plate 19. Deadbolt Reinforcement 4. Outside Cylinder Plate Escutcheon 20. Tubular Latch Dust Box5. Outside Sub-plate 21. Tubular Latch Strike6. Lever Spindle 8mm Square 22. Tubular Latch Strike 7. Deadbolt Screws 8. Inside Sub-plate 23. Tubular Latch Faceplate 9. Cylinder Thru-bolts Screws10. Inside Cover Plate 24. Tubular Latch Faceplate11. Thumb-turn Washer 25. Tubular Latch–TL2 Passage12. Thumb-turn 26. Latch Bracket13. Set Screw for Thumb-turn 27. Set Screw for Lever14. Deadbolt Faceplate Screws 28. Outside Lever15. Deadbolt Strike Screws16. Deadbolt Strike

Exploded Diagram (LA Dummy Entry)

1. Outside Lever 6. Inside Sub-plate2. Outside Blind Cylinder 7. Cylinder Thro-bolts3. Outside Cover Plate 8. Wood Screws4. Outside Cylinder Escutcheon 9. Inside Cover Plate5. Outside Sub-plate 10. Set Screw for Lever

Exploded Diagram (LA Entry with Double Cylinder)

1. Keys 15. Deadbolt Strike2. Outside Rim Cylinder 16. Deadbolt Dust Box w/ Tailpiece 17. Deadbolt Reinforcement3. Outside Cover Plate Plate Screws4. Outside Cylinder 18. Deadbolt Reinforcement Escutcheon Plate5. Outside Sub-plate 19. Tubular Latch Dust Box6. Lever Spindle 8mm Square 20. Tubular Latch Strike7. Deadbolt 21. Tubular Latch Strike Screws8. Inside Sub-plate 22. Tubular Latch Faceplate9. Inside Cover Plate Screws10. Inside Cylinder Escutcheon 23. Tubular Latch Faceplate11. Inside Rim Cylinder 24. Tubular Latch–TL2 Passage w/ Tailpiece 25. Latch Bracket12. Cylinder Thru-bolts 26. Set Screw for Lever13. Deadbolt Faceplate Screws 27. Outside Lever14. Deadbolt Strike Screws

Exploded Diagram (LA Dummy Pair)

1. Outside Lever 5. Wood Screws2. Outside Cover Plate 6. Inside Cover Plate3. Outside Sub-plate 7. Set Screw for Lever4. Inside Sub-plate

TUBULAR LOCKSETS


Version: 2015.6

Care and Maintenance

Lever and Knob HandlesOn installations where the correct procedures have been carried out per the instructions, the lever handles will not require adjustment. However, all fixings should be checked for tightness annually. Any loose fixings should be adjusted. Badly fitted furniture can cause interference with the operation of the lock and at the same time, damage the surface of the furniture. INOXTM snap-on rose covers should only be removed using proper tools. A screw driver blade should never be used as this can distort the rose cap out of alignment and scratch the surfaces of both product and door.

Care of FinishesToday’s environment exerts immense pressures on product material requirements. Products must withstand a diversification of atmospheric conditions, such as high pollution, marine locations, and high humidity climates. Additionally, products must be protected against cleaning agents/solutions and ideally the product should offer hypo-allergenic properties.

Stainless SteelStainless steel is renowned for the following two properties; resistance to corrosion and low maintenance requirements. Stainless steel corrosion resistance is attributable to the presence of a thin, durable film of passive, but stable, chromium oxide. Being inert, invisible, extremely adherent and self-repairing, this film provides an unrivalled protection for the steel; should the film be damaged or removed it will regenerate independently, provided that oxygen is present to allow the reaction to occur with the chromium content of the steel. Therefore you must ensure regular cleaning and maintenance, to restore the original surface appearance, prevent corrosion and maintain hygienic conditions.

Cleaning TechniqueIt is important to clean stainless steel regularly.• Initially, wash down the surface using soapy water or a mild detergent.• Always thoroughly rinse the cleaning agent away with clean, warm water.• To complete the cleaning procedure, dry/polish the item with a soft, dry cloth.

Note: Within aggressive conditions, such as offshore, marine and swimming pool environments, it is especially relevant to ensure that cleaning maintenance occurs regularly.

DiscolorationIf spots appear on the surface it is not due to the stainless steel, but to impurities in the water, the air or to cleaning agents that have not been thoroughly removed from the surface.• Spots can be avoided by careful cleaning.• If discoloration or spots occur they can be removed by using special polishing agents for stainless steel or a light scouring cream.• Again rinse thoroughly with clean water and polish with a soft, dry cloth.

What to Avoid!• Scouring powders• Steel wool• Strong abrasive materials

Note: Acid based cleaning solutions, except for hydrochloric acid, may be used on AISI 304 stainless steel as long as thoroughly rinsed with clean water afterwards. For further information on stainless steel, please contact your local INOXTM distributor for the INOXTM Stainless Steel Technical Details information sheet.

15

TUBULAR LOCKSETS


Version: 2015.6

Product Warranty

Limited Lifetime Warranty

Unison Hardware, Inc. warrants that its INOXTM residential products shall be free from defects in material and workmanship for the life of the product, excluding components made of wood, leather or plastic. This warranty extends to the original purchaser and the first consumer owner only. If a product fails due to defects in material or workmanship during the warranty period we will replace it with the most nearly identical product which we sell at the time or refund the original purchase price. Unison Hardware, Inc. will not be liable for any labor charges or freight costs incurred in connection with repair or replacement of a product. Our sole and maximum liability for defective goods (Sold and manufactured by Unison Hardware, Inc.) shall never exceed the cost of the subject products.

This warranty does not cover:a. Damage resulting from negligence, misuse, abuse or accident occurring after installationb. Damage due to use outside normal architectural requirementsc. Defects resulting from any modification or improper installationsd. Improper torquing (tightening) during or after installatione. Improper door preparationsf. Use of residential grade products in commercial applications (i.e. public building, restaurants, offices etc.)g. Products installed within three miles of the oceanh. Products installed in exterior application and/or exposed to the outdoor weather or elements

Limited Lifetime Finish Warranty

Unison Hardware, Inc. warrants its INOXTM products made of stainless steel material against tarnishing. This warranty is extended to the original purchaser of INOXTM products as long as the User occupies the residential premises on which the Products were originally installed. Not covered under this warranty are:a. Products which have been scratched or abradedb. Products which have been incorrectly installed or mistreatedc. Products installed within three miles of water (ocean, lakes, rivers, etc.), harsh environments and/or commercial or industrial applicationsd. Products installed in exterior application and/or exposed to the outdoor weather or elementse. Finishes which are specifically designed to wear over time (i.e. Oil Rubbed Bronze finish)

UNISON HARDWARE, INC. MAKES NO OTHER WARRANTY, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY PERIOD AS SET FORTH ABOVE. THE COMPANY'S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL DAMAGES OF ANY NATURE ARISING FROM THE SALE OR USE OF THIS PRODUCT, WHETHER IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE.THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

16

TUBULAR LOCKSETS


Version: 2015.6

Please visit our website

www.inoxproducts.com

for more technical and new product information.

Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected]

Date post:	11-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

RA/SE/GT/GS/LA/SF TRIM€¦ · RH – Right Hand LH – Left Hand RHR – Right Hand Reverse LHR...

Documents