Continuous take-up feature. Ultimate strength is 3.5 times safe load.
SLINGS, LOAD BINDERS & JACKSSl
ings
, Loa
dbin
ders
, &
Jac
ks
LOAD BINDER - LEVER TYPE
RATCHET CABLE REEL JACKSLOAD BINDER - RATCHET TYPE
HEAVY DUTY DRAW BARCat. No. 108000
This type H drawbar is built for heavy duty service and is designed primarily for use with 3 - 5 ton capacity trailers.
Six studs along bottom of bar grip into pole. Two 36” chains are included. 45” long, Pintle ring ID: 2-5/8”, 73 lbs.
PORTABLE POLE BINDER
RATCHET LEVER LOAD BINDER
CLEVIS GRAB HOOKCat. No. A330-(size) AlloyCat. No. H330-(size) Carbon Steel
Cat. No. Description
A1029
Aluminum Alloy hous-ing, holds 36"-84" reels
and up to 3" spindlesTop Hooks: 20 tonSide Hooks: 10 ton
320B
Forged alloy steel, holds 20"-60" reels and up to
2" spindlesTop Hooks: 10 tonSide Hooks: 5 ton
10665 60" Lever Bar for A102910640 36" Lever Bar for 320B
Cat. No. Description172-A-51 Pole Binder
107301 Pole Binder with Mounting Base
Designed to be used primarily to tie down or bind from one to a full load of poles. May also be used for cross arms or general cargo.
This pole binder is a compact tool with an integral ratchet take up and spring loaded pawl. It's base and rope knob are constructed of a one piece steel casting.
Unit is furnished with an 18' cable sling. Also available with a welded base plate for bolting to the trailer.
Cat. No. Chain Size Take-Up Safe LoadL150-71 5/16"-3/8" 4.5" 5,400 lbL150-A1 3/8"-1/2" 4.5" 9,200 lbL150-C1 1/2"-5/8" 4.75" 13,000 lb
Cat. No. Chain Size Take-Up Safe LoadL140-R7 5/16"-3/8" 8" 5,400 lbL140-RA 3/8"-1/2" 8" 9,200 lbL140-RC 1/2"-5/8" 8" 13,000 lb
Extra heavy construction at leverage point prevents spreading. Ultimate load is 3.5 times safe load. Standard Pack: 4
Cat. No. Chains Take-Up Safe LoadA 1 20" 1,500 lb
AD 2 20" 3,000 lb
These 3/8" roller chain load binders provide incremental take-up for proper tensioning. Double chain model converts to single-chain.
Safe LoadChain Size H330 A330
1/4" 2,600 lb 3,600 lb5/16" 3,900 lb 5,400 lb3/8" 5,400 lb 7,500 lb7/16" 7,200 lb 10,000 lb1/2" 9,200 lb 12,750 lb5/8" 12,750 lb 19,000 lb
186HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 187
SLINGS, LOAD BINDERS & JACKSSlings, Loadbinders,
& Jacks
• Easy to install and easy to use• Most secure latch on the market• Latch is pad lockable• Prevents accidental release of chain from hook
connection• Prevents inadvertent re-hooking during removal
Normal Uses:• Chain to chain hooking• Equipment safety chains• Over-the-road safety chains• Tie down chains• In place of slip hooks
TWIST LOCK GRAB HOOKS
Cat. No. Size WLLG8-200-14 1/4" 3,500 lb
G8-200-516 5/16" 5,350 lb
G8-200-38 3/8" 7,100 lb
G8-200-12 1/2" 12,000 lb
G8-200-58 5/8" 18,100 lb
• Pin fully retracts without coming loose• Shackles are forged alloy still with alloy pin• Quick locking and unlocking action means less
time in the "Danger Zone"• Size and working load limit are permanently
shown on each shackle• Proof tested to twice the working load limit• No tools required to operate• All shackles have a batch code which links to a
test certificate and quality traceability• Minimum ultimate break is 4 times the working
load limit• Pin permanently attached to the shackle• Open cross pin becomes a stable handle
TWIST LOCK SHACKLES
Cat. No. Size WLL11-TLS34 3/4" 7T
11-TLS1 1" 12.5T
11-TLS125 1-1/4' 18T
SLINGS, LOAD BINDERS & JACKS
Page 223
Cat. No. HLBHT1010The 10' x 10' hole tarp is similar to blanket sling above, but has a size-adjustable auger hole. Features velcro closures. This tarp is not load rated.
Slin
gs, L
oadb
inde
rs,
& J
acks
BLANKET SLINGThese wide flat lifting slings are available in several sizes and rated capacities to fit your needs. Designed to lessen the physically demanding efforts of utility workers in the field, making their job easier, cleaner and faster.
Constructed of reinforced, heavy duty, 22 oz., U.V. resistant, fabric and an integral high strength lift strap system. Lift handles are positioned at each corner for "back saving" winch use.
• Replaces rock boxes & barrels• Contains leaking transformers• Holds contaminated soil• Transports fill material• Eliminates back injuries• Saves time & labor• Folds & stores easily
Designed by a 35-year veteran Line Foreman
Cat. No. Size Safe Lift CapacityHL66R 6' x 6' 700 lb 18" augers up to 35' polesHL77R 7' x 7' 1,100 lb Holes for larger poles & URD work areasHL88R 8' x 8' 1,400 lb Holes for larger poles & URD work areas
HL1010R 10' x 10' 1,600 lb Holes for larger poles & URD work areas
HOLE TARP
Winch Lines Made to Order
188HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 189
SLINGS, LOAD BINDERS & JACKSSlings, Loadbinders,
& Jacks
HOWE WIRE TOOL
Cat. No. 5606Made of 2" wide nylon web stitched with nylon thread. Copper rivets with burrs at the point of wear. Use where a running loop wrap around pole is desired. Resistant to oil, creosote and moisture. 39" long. Rated cap: Choke-3000 lbs., Basket-4700 lbs.
POLE SLING CHAIN POLE SLING
3/8” diameter chain with sliding choker hook. 7,100 lb. capacity.
TRANSFORMER SLING
AUGER SLINGCat. No. EE1-601-101” X 10’ nylon auger sling
Specifically designed to enable one person to move a transformer. Made from 100% High Tenacity Polyester and adjustable from 24”-48.” Eyes on each end are adjusted from 3”- 15” to accommodate various sizes of transformers. Each end has a crown splice to prevent eye from pulling out. Three chafe collars and vinyl coating protect against abrasion.
ADJUSTABLE TRANSFORMER SLING
Cat. No. Size Safe Work Load at 60°
HLTF2-36 36" 5,500 lbHLTF2-48 48" 5,500 lbHLTF2-72 72" 5,500 lb
Cat. No. Diameter Safe Work Load Tensile Color
HLTF08-48 1/2" 1,225 lb 7,200 lb BlueHLTF10-48 5/8" 2,160 lb 12,000 lb RedHLTF12-48 3/4" 3,200 lb 16,000 lb Green
Cat. No. DescriptionSCH38X5 5' Chain Pole SlingSCH38X6 6' Chain Pole SlingSCH38X7 7' Chain Pole SlingSCH38X8 8' Chain Pole Sling
Cat. No. 1702-20N1" x 7' strap is made of tough nylon webbing.
Swivel hook is forged steel with large opening. Shank of hook lengthened to reach under insulator. Other end has device to hold the load at any distance.Max. safe work load is 500 lbs.
Ideal for Single Man lifts. Elastic tensioner keeps sling upright and in place allowing a single lineman to "PICK" transformer from bucket above. Sling is made of 2" nylon webbing. Three steel triangles eliminate wear at contact points.
Features a web-trap triangle and choker fitting on either end. Typical use is in a choker hitch, but can also be used in vertical and basket hitches.
HEAVY DUTY NYLON SLINGS
SLINGS, LOAD BINDERS & JACKSSl
ings
, Loa
dbin
ders
, &
Jac
ks
TYPE U SLINGS
Cat. No. Width Rated Capacities (lb)
Vertical Choker BasketSingle Ply
EE1-801 1" 1,600 1,280 3,200EE1-802 2" 3,200 2,500 6,400EE1-803 3" 4,800 3,800 9,600EE1-804 4" 6,400 5,000 12,800
Double PlyEE2-801 1" 3,200 2,500 6,400EE2-802 2" 6,400 5,000 12,800EE2-803 3" 8,800 7,040 17,600EE2-804 4" 11,500 9,200 23,000
These slings feature nylon webbing which stretches more to help avoid shock loading. Features red core warning yarns. Do not exceed rated capacities.
Cat. No. Width Rated Capacities (lb)
Vertical Choker BasketSingle Ply
EN1-801 1" 3,200 2,500 6,400EN1-802 2" 6,400 5,000 12,800EN1-803 3" 8,800 7,040 17,600EN1-804 4" 11,500 9,200 23,000
Double PlyEN2-801 1" 6,200 4,900 12,400EN2-802 2" 12,400 9,900 24,800EN2-803 3" 16,300 13,000 32,600EN2-804 4" 20,700 16,500 41,400
Cat. No. Width Rated Capacities (lb)
Vertical Choker BasketSingle Ply
UU1-802 2" 3,200 2,500 6,400UU1-803 3" 4,800 3,800 9,600UU1-804 4" 6,400 5,000 12,800
Double PlyUU2-802 2" 6,400 5,000 12,800UU2-803 3" 8,800 7,040 17,600UU2-804 4" 11,500 9,200 23,000
Cat. No. ColorRated Capacities (lb)
Vertical Choker BasketEN30 Purple 2,600 2,100 5,200EN60 Green 5,300 4,200 10,600EN90 Yellow 8,400 6,700 16,800EN150 Red 13,200 10,600 26,400EN240 Blue 21,200 17,000 42,400
Cat. No. Width Rated Capacities (lb)
Vertical Choker BasketSingle Ply
TC1-802 2" 3,200 2,500 6,400TC1-803 3" 4,800 3,800 9,600TC1-804 4" 6,400 5,000 12,800TC1-806 6" 9,600 7,700 19,200TC1-808 8" 12,800 10,200 25,600TC1-810 10" 16,000 12,800 32,000TC1-812 12" 19,200 15,400 38,400
Double PlyTC2-802 2" 6,400 5,000 12,800TC2-803 3" 8,800 7,040 17,600TC2-804 4" 11,500 9,200 23,000
Specify desired length when ordering.
Features a Unilink® fitting on each end for use in a vertical, choker or basket hitch. Allows choking from either end to save time and vary wear points.
TYPE 1 SLINGS TYPE 3 & 4 SLINGS• Type 3 (standard option) features flat eyes
which can be used in all three types of hitches.
• Type 4 features twisted eyes that are turned 90° to form a better choker hitch. Add "T" to Cat. No. below for Type 4 sling.
TYPE 5 SLINGSEndless slings are versatile and can be used in all three types of hitches. The sling can be rotated to minimize wear.
ROUND SLINGS
These Tuflex® round slings feature a double wall cover for greater sling life. They are color-coded for quick identification. Chokes tighter and releases easier than other slings.
190HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com