Rate Amount Sl. No DSR No. Description of Item Quantity...

FACULTY QUARTER , BACHELOR,S QUARTER , WORKSHOP, PUMP HOUSE , SUBSTAION STREET LIGHTING (PACKAGE-III)-ELECTRICAL BOQ

Sl. No DSR No. Description of Item Quantity Unit DSR NON SCH./JR DSR AMOUNT NS/JR AMOUNT

C1 1.1 WGSTLPT Wiring for light point/ fan pt./ exhaust

fan pt./ call bell pt. with 1.5 sqmm FR

PVC insulated copper conductor single

core cable in surface/ recessed steel

conduit, with piano type switch,

phenolic laminated sheet, suitable size

MS box and earthing point with 1.5

sqmm FR PVC insulated copper

conductor single core cable etc. as

required:

a 1.1.1 Group A 10 361.00 3,610.00

b 1.1.2 Group B 36 436.00 15,696.00

c 1.1.3 Group C 28 559.00 15,652.00

C2 1.8 WGPVCP Copper point wiring in PVC conduit:

Wiring for light point/ fan pt./ exhaust

fan pt./ call bell pt. with 1.5 sqmm FR


core cable in recessed PVC conduit,

with piano type switch, phenolic

laminated sheet, suitable size MS box

and earthing point with 1.5 sqmm FR


core cable etc. as required:

a 1.8.1 Group A 250 Pt. 264.00 66,000.00

b 1.8.2 Group B 200 Pt. 305.00 61,000.00

c 1.8.3 Group C 160 Pt. 397.00 63,520.00

Rate Amount

ELEC- 1



Rate Amount

C3 1.14 WGPVCSB Circuit/ Sub-main wiring in PVC

conduit: Wiring for circuit/ sub-main

wiring along with earth wire with the

following sizes of PVC insulated

copper conductor, single core cable in

surface/ recessed PVC conduit as

required. (for 5 amp plug point wiring

in recessed).

1.14.1 2 x 1.5 sqmm + 1x 1.5 sqmm earth

wire 1350 Meter 71.00 95,850.00

C4 1.7 WGSTLSB Copper sub main wiring in steel

conduit: wiring for sub-main wiring

with the following size of PVC

insulated, copper conductor, single

core cable in surface steel conduit as

required:

a 1.7.11 4 x 10 sqmm + 2x 10 sqmm earth wire

500 Meter 367.00 1,83,500.00

b 1.7.3 2 x 4 sqmm + 1x 4 sqmm earth wire

700 Meter 135.00 94,500.00

C5 1.20 STLCON Supply and fixing of following sizes of

steel conduit along with the

accessories in recessed including

painting incase of surface conduit, or

cutting the wall and making good the

same in case of recessed conduit as

required:

1.20.1 20 mm 200 meter 77.00 15,400.00

ELEC- 2



Rate Amount

C6 1.29 LPACCPT Supply and fixing light plug point piano

type accessories: Supply and fixing

metal box of 150mm x 75mm x 60mm

deep (nominal size) on surface or in

recessed with suitable size phenolic

laminated sheet cover in the front

including providing and fixing 3pin 5/6

amp socket outlet and 5/6 amp piano

type switch, connection painting etc.

as required.(For light plugs to be used

only in non - residential buildings)

132 each 102.00 13,464.00

C7 non sch Light plug point on board with copper

wiring in PVC conduit : Wiring for 3

pin 5/6 amps. Plug point with

1.5sqmm PVC insulated, copper

conductor cable including providing

and fixing 3 pin 5/6 amp. socket outlet

on switch board (in recessed PVC

conduitsystem) and 5/6 amps.

Piano/tumbler type switch, earthing

the third pin, painting etc. as required

96 150.00 14,400.00

C8 1.30 PPACCPT Supply and fixing metal box of 180mm

x 100 mm x 60mm deep (nominal

size) on surface or in recessed with

suitable size phenolic laminated sheet

cover in the front including providing

and fixing 6pin 5/6 & 15/16 amps

socket outlet and 15/16 amps piano

type switch, connection painting etc.

as required.116 each 161.00 18,676.00

ELEC- 3



Rate Amount

C9 1.12 WGPVCPP2 Power plug point wiring in PVC

conduit (2 x 4sqmm): wiring for

light/power plug with 2x4sqmm FR

PVC insulated copper conductor,

single core cable in surface/ recessed

PVC conduit along with 1no.4 sqmm

FR PVC insulated copper conductor

single core cable for loop earthing as

required.1200 Meter 97.00 1,16,400.00

C10 1.14 WGPVCSB Circuit/ Sub-main wiring in PVC

conduit: Wiring for circuit/ sub-main

wiring along with earth wire with the

following sizes of PVC insulated

copper conductor, single core cable in

surface/ recessed PVC conduit as

required.

a 1.14.1 2 x 1.5 sqmm + 1x 1.5 sqmm earth

wire 6100 Meter 71.00 4,33,100.00

b 1.14.3 2 x 4 sqmm + 1x 4 sqmm earth wire

500 Meter 97.00 48,500.00

c 1.14.4 2 x 6 sqmm + 1x 6 sqmm earth wire

300 Meter 127.00 38,100.00

C11 1.23PTSWEB S/Fpiano type switch/socket:

Supplying and fixing following piano

type switch/ socket on the existing

switch box/cover including connections

etc. as reqd.

a 1.23.1 5/6amps switch 0 each 17.00 0.00

b 1.23.4 3 pin 5/6 amps socket outlet 0 each 21.00 0.00

ELEC- 4



Rate Amount

C12 non-schedule Supplying and transportation of the

following categories of light fittings.

a N.Z.C. Rate 4'-40W Single box Fl fitting equivalent

to TMC 55/136 of Philips or equivalent

including 1 x 40w FL Tube, starter,

choke etc. 88 Each 615.80 54,190.40

b non-schedule 2 x 4'-40W double, FL. street light

luminair equivalent to TRC 33/236

HPF of Philips or equivalent including

2 x 40w FL Tube, starter, choke etc.

8 Each 1,950.00 15,600.00

c non-schedule 2 x 4'-40W double box Fl fitting

equivalent to TMC 55/236 of Philips or

equivalent including 2 x 40w FL Tube,

starter, choke etc. 8 872.60 6,980.80

C13 JSR Supppy and fixing Brass battern/

Angle holder with 60W GLS lamp

including connection etc. as required

complete 72 each 22.25 1,602.00

C14 Supply and fixing of ceiling fitting of

10" dia with frosted glass cover and

60W GLS lamp including connection

as required complete. 45 each 390.00 17,550.00

C15 non-schedule Supply and fixing wall bracket with

frosted glass cover with brass holder

and 14 W CFL of Philips make.

72 Each 400.00 28,800.00

C16 Supplying and fixing wall bracket with

MS canopy with powder coated finish

along with porcelean holder and 14

watt CFL of Phillips make. 0 Each 400.00 0.00

ELEC- 5



Rate Amount

C17 non-schedule Supply and fixing decorative wall

mounted PL fitting complete with 11W

PL lamp and ballast simillar to type

FMC 300/ 111 of philips/ Bajaj/

Crompton. 90 each 555.00 49,950.00

C18 Supply and fixing best quality bulk

head fitting complete with glass, wire-

net and 60W GLS lamp, including

connection as required. 16 150.00 2,400.00

C19 non-schedule Supplying and Transportation of

following categories of ceiling fans/

exhaust fan complete with all

accessories like down rod, regulator

etc.

a D.G.S.D. Rate 48" sweep ceiling fan for AC-230V

operation(Crompton Greaves, Khaitan,

Polar, Bajaj) 80 Each 917.12 73,369.60

b D.G.S.D. Rate 56" sweep ceiling fan for AC-230V

operation.(Crompton Greaves,

Khaitan, Polar, Usha, Ortemj) 5 Each 994.14 4,970.70

c JSR 12" dia 1400 rpm A.C heavy duty

exhaust fan complete with louvers etc.

as required (Polar, Crompton,

Calcutta, Bajaj). 34 Each 1,530.00 52,020.00

C20 non-schedule Supply and fixing 400mm dia AC wall

bracket fan with revolving head and

built in regulator system suitable for

230V AC.(Bajaj, Polar, Usha).

28 2,200.00 61,600.00

ELEC- 6



Rate Amount

C21 non-schedule Supply and fixing 1.1KV grade PVC

insulated and sheathed armoured

aluminium conductor cable of

following size cable either in trench or

on surface /recessed by cutting

trenches and refiling the same with

shifted soil after laying the cable and

providing bricking protection.

4X 10 sq.mm 300 meter 195.00 58,500.00

C22 non-schedule Supplying and fixing compression type

brass gland including finising the ends

of PVC cable with AL lugs with

crimping joints along with all

accessories for the following size of

PVCA AL cable.

4X 10 sq.mm 16 each 78.95 1,263.20

C23 2.33 TPMCBDB Supplying and fixing following way,

three pole and neutral, sheet steel,

MCB distribution board, 415 volts, on

surface / recess, complete with tinned

copper busbars, neutral busbar, earth

bar, detachable gland plate,

interconnections, phosphatized and

powder painted including earthing etc.

as required, without MCB/ RCCB/

Isolator. ( general LDB)

2.33.6 8 way (4 + 24), double door, horizontal

type. 9 1,803.00 16,227.00

ELEC- 7



Rate Amount

C24 2.31

SPMCBDB

Supplying and fixing following way,

single pole and neutral, sheet steel,

MCB distribution board, 240 volts, on

surface / recess, complete with tinned

copper busbars, neutral busbar, earth

bar, din bar, detachable gland plate,

interconnections, phosphatized and

powder painted including earthing etc.

as required,( but without MCB/ RCCB/

Isolator)

a 2.31.1 4 way, single door 4 301.00 1,204.00

b 2.31.2 8 way, single door 9 Each 372.00 3,348.00

C25 2.51 MCBB Supply and fixing 5amp. to 32 amp.

rating 240V , 'B' series, miniature

circuit breaker forlighting and other

loads of following poles in existing

MCB DB complete with connections,

testing and commissioning etc. as

required.

a 2.51.1 Single pole 208 Each 86.00 17,888.00

b Non sche Triple pole 63A 13 Each 1,204.00 15,652.00

C26 2.54 MCBDPIS Supplying and fixing following rating,

double pole, 240 volts, isolator in

existing MCB DB complete with

connections, testing and

commissioning etc. as required:

2.54.1 40 amps 5 Each 166.00 830.00

ELEC- 8



Rate Amount

C27 2.55 MCBTPIS Supplying and fixing following rating,

four pole, 415 volts, isolator in existing

MCB DB complete with connections,

testing and commissioning etc. as

required:

2.55.2 63 amps 5 each 362.00 1,810.002.55.1 40 amps 5 each 345.00 1,725.00

C28 1.41 ITCFFSUR ITC fluroscent fitting directly on

surface with copper wiring:

Installation, testing and

commissioning of prewired,

flourescent fittings of all types

complete with all accessories and tube

etc. directly on ceiling/wall including

connections with 1.5 sq.mm FR PVC


core cable and earthing etc. as

required321 Each 43.00 13,803.00

C29 1.42 ITCFFDR ITC fluroscent fitting with down rods

and copper wiring: Installation, testing

and commissioning of prewired,

flourescent fittings of all types

complete with all accessories and tube

etc. including supply and fixing ball

and socket arrangement, 2nos. down

rods of 20mm dia x 1.6mm thick steel

conduit upto 30cm. length painting

and wiring the down rod and

connection with 1.5sqmmfFR PVC

insulated Cu conducter single core

cable and earthing etc. as required.

19 Each 126.00 2,394.00

ELEC- 9



Rate Amount

C30 1.43 EXTDR P/F extra down rod with copper wiring:

Providing and fixing extra conduit

down rod of 20 mm dia. 2 X 10 cm

length with 2 X 1.5 sq.mm FR PVC

insulated , copper conductor , single

core cable including painting etc. as

required (Note: more than 5 cm length

shall be rounded to the nearest 10 cm.

and 5 cm. or less shall be ignored).

19 Each 17.00 323.00

C31 1.45 ITCCFFC Installation, testing and

commissioning of ceiling fan including

wiring the downrod of standard length

(upto 30cm) with 1.5 sq.mm FR PVC


core cable including P/F phenolic

laminated sheet cover on the fan box

etc. as reqd.

225 Each 68.00 15,300.00

C32 1.49 EXTPIP20 S/F extra down rod of 10cm length GI

pipe 20mm dia heavy gauge including

painting etc. as required. 225 Each 14.00 3,150.00

C33 1.51 NUMFANFT Numbering of ceiling fan/exhaust

fan/FL fitting etc. 565 Each 10.00 5,650.00

C34 1.52 ITCEF450 Installation of exhaust fan upto

450mm sweep in the existing opening,

including making the hole to suit the

size of the above fan, making good the

damage, connections, testing,

commissioning etc. as required.

24 Each 223.00 5,352.00

ELEC- 10



Rate Amount

C35 1.54 LOUSHEF Fixing louvres /shutters for exhaust

fan:Extra for fixing the louvres

/shutters complete with frames for

exhaust fans of all sizes 24 Each 65.00 1,560.00

C36 non schedule Fixing only out door street light type

Fl / MV light fitting complete with all

accessories like S/F 40mm dia GI pipe

Class B 1.5m Av. Length having

suitable bend including S/F MS clamp,

PVC Cu wire and making connection

including making good the damages

and painting etc. 12 each 0.00 405.25 4,863.00

C37 2.64

MCBTPSOC30

S/F 30A TPN MCB industrial socket

outlet : S/F 30A 400V TPN industrial

type socket out let with four pole and

earth metal enclosed plug top along

with 30A C series TP MCB in sheet

steel enclosure on surface or in recess

with chained metal cover for the

socket outlet and complete with

connection , testing and

commissioning etc. as required.2 each 1,294.00 2,588.00

ELEC- 11



Rate Amount

C38 2.62

MCBDPSOC20

S/F 20A SPN MCB industrial socket

outlet : S/F 20A 240V SPN industrial

type socket out let with two pole and

earth metal enclosed plug top along

with 20A C series SP MCB in sheet

steel enclosure on surface or in recess

with chained metal cover for the

socket outlet and complete with

connection , testing and

commissioning etc. as required.40 each 520.00 20,800.00

C39 non schedule Providing and drawing two pair 0.5

ATC telephone cable in the existing

conduit including connection as

required 200 meter 25.00 5,000.00

C40 non schedule Providing and fixing telephone socket

out let in 100x100x 50 MS box

recessed in wall with backelite top

cover including connection and

making good the damages 8 set 960.00 7,680.00

C41 non schedule Providing and fixing telephone junction

box of krone type with MS enclosure

including connection as required.: 10

pair. 2 set 2,000.00 4,000.00

ELEC- 12



Rate Amount

C42 non schedule Supplying, installation, testing and

commissioning of surface / recessed

mounting vertical type

compartmentalised, 415V TPNMCBDB

OF sheet steel 1.6mm thick, dust

protected, duly painted inclusive of

200A tinned Cu busbar, eath bar,

nutral link, dinbar, detachable gland

plate with incoming of 125A TPN

MCCB ( 16KA) and out going circuits,

duly wired with adequate size of PVC

insulated Cu wire between busbar &

MCBs as well as incommer and upto

the terminal connectors / nutral link of

following ways ( without MCB)

8 way 8 each 8,230.00 65,840.00

ELEC- 13



Rate Amount

C43 Non-Schedule L.T. Panel : Supply and installation of

Distribution Boards 415/240 volt 3-

phase neutral 50 Hz. A.C. dust and

vermin proof sheet steel (2mm thick)

enclosed floor /wall mounted cubicle

type, complete with all accessories like

indicating lamps, instrument fuse

units, earthing terminals, danger plate

, inter-connection wiring, identification

lettering etc. Each board shall

comprise of the following and as

specified under Technical

specifications including supply and

installed M.S. wall mounting

brackets/floor mounted on ISMC

100X50X6 mm M.S. Channel over

cable trench etc. with all Civil work.

A L.T. PANEL :

Incomming (1) No. 1000A 4pole ACB,

50KA thermal magnetic, manual

drawout type, with O/C, S/C & E/F

element.

ELEC- 14



Rate Amount

Metering with 1no No. 0-500V range

voltmeter with protective HRC fuses

and selector switch one (1) CT

operated KWH Meterr, set of indicator

lamps with protective fuse, 1no 0-

1000A Ammeter with 1000/5A CT

Bus - Bar - One (1) sets of 4pole

1000A FP Aluminium color coded bar

(1) No. 630A 4pole MCCB 50KA





(1) No. 63A 4pole MCB

(2) No. 40A 4pole MCB


One (1) length 40mmX 6mm. G.I.

earth busbar in bottom of the panel

Complete panel as staed above 1 set 6,81,540.00 6,81,540.00

C44 non schedule Providing and installing LT (415V)

FOR HOD AND SR FACULTY QTR

cubical type floor mounted, front

operated with 16SWG MS sheet

enclosure with suitable rating, colour

coaded Al bus bar, powder coated

painting, interconnected with Cu lead

with crimping lugs and complete with

the following equipments:

ELEC- 15



Rate Amount

63A TPN S/F unit with HRC fuse as

incommer -1 No.

100A TPN Al colour coated busbar -

1set

Metering panel complete with 1 No. 0-

500V voltmeter, 1 No ASS, 1No VSS

,3nos 5A slide lock fuse, 3Nos

indicator lamp.

32A SPN MCB as outgoing -10Nos.

20A, 240 Volt single phase KWH

meter, rotating disk type:- 9 numbers

MCCB / MCB make - C&S /HPL-

Moeller/ L&T/ meter -AE / CT-KAPPA /

ASS /VSS-KAYCEE etc. 1 set 23,350.00 23,350.00

C45 Providing and installing LT (415V)

FOR BACHELOR QTR cubical type

floor mounted, front operated with

16SWG MS sheet enclosure with

suitable rating, colour coaded Al bus

bar, powder coated painting,

interconnected with Cu lead with

crimping lugs and complete with the

following equipments:


incommer -1 No.


1set

Metering panel complete with 1 No. 0-

500V voltmeter, 1 No ASS, 1No VSS

,3nos 5A slide lock fuse, 3Nos

indicator lamp.

ELEC- 16



Rate Amount

32A SPN MCB as outgoing -18Nos.

20A, 240 Volt single phase KWH

meter, rotating disk type:- 17 numbers

MCCB / MCB make - C&S /HPL-

Moeller/ L&T/ meter -AE / CT-KAPPA /

ASS /VSS-KAYCEE etc. 1 set 35,700.00 35,700.00

C46 non schedule Providing and installing LT (415V) for

HOSTEL BLDG cubical type floor

mounted, front operated with back

door panel with 16SWG MS sheet

enclosure with suitable rating, colour

coaded Al bus bar, powder coated

painting, interconnected with Cu lead

with crimping lugs and complete with

the following equipments:


incommer -1 No.


1set

Metering panel complete with 1No. 0 -

150A ammeter,1 No. 0-500V

voltmeter, 1 No ASS, 1No VSS ,3nos

5A slide lock fuse, 3Nos indicator

lamp, and 3 nos. 150/ 5A CTs.

63A TPN MCB as outgoing -1No.

32A TPN MCB as outgoing -10Nos.

S/F unit / MCB make - Indo Asian

/HPL / Havells, meter- AE, CT-kappa,

ASS / VSS - kaycee etc. 1 set 50,000.00 50,000.00

ELEC- 17



Rate Amount


FOR WORKSHOP, cubical type floor

mounted, front operated with 16SWG

MS sheet enclosure with suitable

rating, colour coaded Al bus bar,

powder coated painting,




Incomming (1) No. 250A 4pole MCCB

50KA

Metering with (1) No. 0-500V range


and selector switch one set of

indicator lamps with protective fuse,

(1) 0-250A Ammeter with 250/5A CT

with selector switch etc.

Bus - Bar - (1) sets of 4pole 300A FP

Aluminium color coded bar




Complete panel as staed above 1 set 56,436.00 56,436.00

ELEC- 18



Rate Amount


FOR WATER PUMP PANEL, cubical

type floor mounted, front operated

with 16SWG MS sheet enclosure with

suitable rating, colour coaded Al bus

bar, powder coated painting,




Incomming (1) No. 100A 4pole MCCB

35KA

Metering with (1) No. 0-500V range


and selector switch one set of

indicator lamps with protective fuse,

(1) 0-100A Ammeter with 100/5A CT ,

selector switch etc.

Bus - Bar - (1) sets of 4pole 100A FP

Aluminium color coded bar

2 No. 32A 4pole MCB

2 No. 40A 4pole MCB

2 No. 63A 4pole MCB



Complete panel as staed above 1 set 39,500.00 39,500.00

ELEC- 19



Rate Amount

C49 Non-Schedule L.T. CABLING

Supply & Laying of 1.1 KV grade

PVCsheeted aluminium /copper

conductor cable of following sizes

confirming to IS: 1554 (Part - 1) in

existing covered masonary trench

including taking out R.C. /MS

chequered plate cover and also cutting

treanch upto 750mm depth and laying

the cable including refilling the treanch

with excavated earth and protective

cover of cables by bricks and sand, all

complete as per instruction of E/I.

a 3-1/2 core, 300 sq.mm (AL)

conductor power cable 200 Meter 1,938.00 3,87,600.00

b 3-1/2 core, 185 sq.mm (AL)

conductor power cable 110 Meter 1,250.00 1,37,500.00

c 3-1/2 core, 70 sq.mm (AL) conductor

power cable 140 Meter 555.00 77,700.00

d 3-1/2 core, 50 sq.mm (AL) conductor

power cable 350 Meter 428.00 1,49,800.00

e 3-1/2 core, 35 sq.mm (AL) conductor


f 4 core, 25 sq.mm (AL) conductor


g 4 core, 16 sq.mm (AL) conductor


h 4 core, 10 sq.mm (AL) conductor


i 2 core, 10 sq.mm (AL) conductor


ELEC- 20



Rate Amount

C50 Non-Schedule Termination of cable ends with double

compression type brass cable gland

and crimping type copper cable cable

sockets including PVC tapes etc. as

required and supply of all materials for

1.1 KV Gr. PVC armored cable

a 3-1/2 core, 300 sq.mm (AL)

conductor power cable 6 set 900.00 5,400.00

b 3-1/2 core, 185 sq.mm (AL)

conductor power cable 2 set 700.00 1,400.00

c 3-1/2 core, 70 sq.mm (AL) conductor

power cable 2 set 400.00 800.00

d 3-1/2 core, 50 sq.mm (AL) conductor

power cable 16 set 300.00 4,800.00

e 3-1/2 core, 35 sq.mm (AL) conductor


f 4 core, 25 sq.mm (AL) conductor


g 4 core, 16 sq.mm (AL) conductor


h 4 core, 10 sq.mm (AL) conductor

power cable 100 set 100.00 10,000.00

i 2 core, 10 sq.mm (AL) conductor


ELEC- 21



Rate Amount

C51 Non-Schedule KWH METER (Digital Type) : Supply

and installation of Digital type KWH

Meter of following rating in the space

already provided in the panela /DB s

including interconnection wiring with

1.1 K>V grade PVC insulated

undersheathed copper conductor wires

of abequate capacity to busbars and

switches:

a 600 Amp. C.T. operated poly phase

KWH Meter 1 each 6,000.00 6,000.00

b i250 Amp. C.T. operated poly phase

KWH Meter 2 each 5,000.00 10,000.00

c 125 Amp. C.T. operated poly phase

KWH Meter 3 each 5,000.00 15,000.00

d 100 Amp. C.T. operated poly phase

KWH Meter 1 each 5,000.00 5,000.00

e 63 Amp. C.T. operated poly phase

KWH Meter 6 each 4,500.00 27,000.00

f 32 Amp. C.T. operated poly phase

KWH Meter 2 each 4,000.00 8,000.00

ELEC- 22



Rate Amount

C52 Non-Schedule POST- TOP LIGHT: Supply and

installation Post Top lighting complete

with controlgear, lamp etc. of following

types mounted on top of Gate/Post

Boundary wall post complete with

interconnection wiring with single core

1.5 sq.mm Cu, conductor PVC

insulated wires including weather proof

16 SWG thick M.S Loop- box at the

base, weather proof type of 200 X

150X100 mm size having front with

locking arrangement and complete

with 4 pole terminal supported on

insulators, 1 No. 15A kitkat fuse,

earthing stud , duly connected for :- i.

70W, HPSV Post Top Lantern.

(Similar to Philips Type No. SPC

106/70 or equivalent)

10 each 4,343.00 43,430.00

ELEC- 23



Rate Amount

C53 Non-Schedule Supplying and installation 7M long

steel tubular pole type 410 SP 2 as

per IS: 2713-1964 including bending

at the top about 1.5m long projection

single arm bracket with 40m dia MS

nipple for holding light fittings, , base

plate, earthing stud etc. with supply

and fixing of weather proof 16 SWG

thick M.S. Loop- box at the pole base

weather proof type of 200 X 150X100

mm size having front with locking

arrangement and complete with 4 pole

terminal supported on insulators, 1

No. 15A kitkat fuse, earthing stud ,

duly connected, 2 Nos. 32mm bore

polythene pipe embedded in concrete

forcable entry & outgoing etc.

including pole wiring with 2 x 1.5

sq.mm PVC copper wire as required.

Erecting the pole with M.S. base plate

in cement concrete foundation 1:3:6,

(The concrete foundation size : 400 x

400 x 1000 (depth) with above ground

pedestral of 300 x 300 x 450, where

loop boox to be accomodated)

including 2 coats of aluminium paint

complete in every respect as per

direction of E/I.

26 8,500.00 2,21,000.00

ELEC- 24



Rate Amount

C54 Non-Schedule Supplying and installation 7M long

steel tubular pole type 410 SP 2 as

per IS: 2713-1964 including bending

at the top about 1.5m long projection

double arm bracket with 40m dia MS

nipple for holding light fittings, , base

plate, earthing stud etc. with supply

and fixing of weather proof 16 SWG

thick M.S Loop- box at the pole base

weather proof type of 200 X 150X100

mm size having front with locking

arrangement and complete with 4 pole

terminal supported on insulators, 1

No. 15A kitkat fuse, earthing stud ,

duly connected, 2 Nos. 32mm bore

polythene pipe embedded in concrete

forcable entry & outgoing etc.

including pole wiring with 2 x 1.5

sq.mm PVC copper wire as required.

Erecting the pole with M.S. base plate

in cement concrete foundation 1:3:6,

(The concrete foundation size : 400 x

400 x 1000 (depth) with above ground

pedestral of 300 x 300 x 450, where

loop boox to be accomodated)

including 2 coats of aluminium paint

complete in every respect as per

direction of E/I.

2 each 9,300.00 18,600.00

ELEC- 25



Rate Amount

C55 Non-Schedule Supply and fixing of street light fitting

suitable for 2 x 40W FL tube complete

with canopy and accrelic cover and

including 2 nos. Fl. tube as required.

(TRC 33/236 HPF of Philips or

equivalent of Bajaj/ Crompton)

30 each 1,930.00 57,900.00

C56 Non-Schedule Providing and installaing street lighting

DB for auto (with manual option)

operation of lighting consisting of 1 no.

4 pole 40A, MCB, 1 no. 25A 4 pole

contactor, 1 no. time switch for seven

days, 24 hours operation, including

bus bar (Al) complete with

interconnection with copper cable and

housed in 16 SWG MS sheet metal

box duly painted and insrtalled on wall

as required complete as per direction

of E/I.

1 SET 8,000.00 8,000.00

C57 2.71 DANPLMV Providing and fixing MV Danger notice

plate of 200mm x 150mm made of

mild steel, atleast 2mm thick, and

vitreous enamelled white on both sides

and with inscription in signal red

colour on front side as required.

49 Each 68.00 3,332.00

ELEC- 26



Rate Amount

C58 3.5 EARGIPL GI Earth Plate Electrode : Earthing

with GI plate 600mm x 600mm x 6mm

thick including accessories and

providing masonry enclosure with

cover plate having locking

arrangement and watering pipe etc.

(but without charcoal or coke and salt

complete) as required. 22 set 1,585.00 34,870.00 0.00

0.00 0.00

C59 3.7 EARCHARPL Salt /charcoal for plate earth electrode:

Extra for using charcoal and salt for

G.I. copper plate earth electrode as

required 22 set 603.00 13,266.00

C60 3.19

EARGIWRSUR

Providing and fixing 6 SWG dia GI

wire on surface or in recess for loop

earthing as required. 255 metre 24.00 6,120.00

C61 3.22

EARCUWRLO

Providing and fixing 4mm dia cu wire

on surface or in recess for loop

earthing along with existing surface /

recessed conduit/ sub-main wiring/

cables as required 5000 metre 36.00 1,80,000.00

LIGHTNING CONDUCTORS

C62 4.2 LCFGI Providing and fixing of lightning

conductor finial, made of 25mm dia,

300mm long GI tube, having single

prong at top, with 85mm dia 6mm

thick GI base plate including holes etc.

complete as required. 23 each 243.00 5,589.00

C63 4.7 LCGITSURH Providing and fixing GI tape 20mm

x3mm thick on parapet or surface of

wall for lightning conductors as

required ( for horizontal run) 480 meter 31.00 14,880.00

ELEC- 27



Rate Amount

C64 4.8 LCGITSURV Providing and fixing GI tape 20mm

x3mm thick on parapet or surface of

wall for lightning conductors as

required ( for verticall run) 435 meter 43.00 18,705.00

C65 4.12 LCTJGI Providing and fixing testing joints,

made of 20mm x 3mm thick GI strip,

125mm long with 4 Nos of GI bolts

nuts check nuts and spring washer

complete as required. 17 each 37.00 629.00

C66 3.5 EARGIPL GI Earth Plate Electrode : Earthing

with GI plate 600mm x 600mm x 6mm

thick including accessories and

providing masonry enclosure with

cover plate having locking

arrangement and watering pipe etc.

(but without charcoal or coke and salt

complete) as required. 17 set 1,585.00 26,945.00

C67 3.7 EARCHARPL Salt /charcoal for plate earth electrode:

Extra for using charcoal and salt for

G.I. copper plate earth electrode as

required 17 set 603.00 10,251.00

C68 Non-Schedule SAFETY EQUIMENT:

a Supplying and fixing of 1000 mm wide

15mm thick rubber mating (complying

with I.S.S) and suitable to withstand

11 KV as required 2 Meter 1,250.00 2,500.00

b Supplying and fixing fire bucket with

sand on iron bracket as appproved by

the fire Directorate of Electricity. 4 each 500.00 2,000.00

ELEC- 28



Rate Amount

c Supply and fixing shock treatment

charts as approved from board by the

Directorate of Electricity 1 each 200.00 200.00

d Supply and fixing of First Aid box

complete with all items including lock

and key on suitable angle iron bracket

1 each 400.00 400.00

EARTHING SYSTEM:

C69 Non-Schedule Supply and installation of earthing

station with 50mm. Dia.galvanised

iron pipe 3.64mm.thick X 3 metres

long 13mm dia 100mm long G.I. bolt

& double nuts nuts & washers, driven

to an average depth of 3.15 mtrs.

Below the ground level and restoring

the surface duly rammed. construction

of inspectionpit for earthing station

with 250mm. thick brick over 100mm.

thick PCC including all inside and

outside plastered, inside and top neat

cemented, heavy duty C.I. manhole

with cover complete with salt and

charcole and supply of all materials

(Cement sand mortar 1:6 and PCC

with cement, stone & sand 1:3:6)

complete as per instruction of E/I.

10 set 3,000.00 30,000.00

ELEC- 29



Rate Amount


station with 600mm.X600mm X 3mm

thick copper plate electrode 50mm dia

gavanised iron pipe, CI funnel with

wire nesh charcoal, complete as per

IS:3043, construction of inspection pit

etc. same as item above.(transformer

neutral earthing).

1 set 7,000.00 7,000.00


station with 16mm dia. 2.5 mtr. Long

G.I. rod with double nuts & washers,

driven below the ground level (for pole

earthing). 35 set 450.00 15,750.00

C72 Non-Schedule Supply & laying /fixing of 50 mm X

6mm G.I. tape from earthing station to

earth busbar /test link including

excavation of earth & refilling, cutting

of wall & mending good damages, G.I.

fixing jointing accessories etc as

required. 150 meter 160.00 24,000.00

C73 Non-Schedule Supply & laying /fixing of 50 mm X

6mm copper tape from earthing

station to earth busbar /test link

including excavation of earth &

refilling, cutting of wall & mending

good damages, G.I. fixing jointing

accessories etc as required.( for

connecting earth pit to transformer

neutral)10 meter 1,200.00 12,000.00

C74 Non-Schedule Supplying and fixing of 8 SWG G.I.

wire and making earthing connectior

complete. 100 meter 15.00 1,500.00

ELEC- 30



Rate Amount

C75 Non-Schedule Supply and drawing PVC sleeve to

50mm X 6mm G.I. strip 50 meter 40.00 2,000.00

17,11,507.00

32,80,537.70

TOTAL DSR AMOUNT

TOTAL Non Sch/ JR AMOUNT

ELEC- 31

Date post:	19-Apr-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Rate Amount Sl. No DSR No. Description of Item Quantity...

Documents