TLPRO152
Series LEDs Color temperature Distribution Voltage Mounting Post height Post Options Finish
TLPRO152 108LED 350MA108LED 530MA108LED 700MA90LED 350MA90LED 530MA90LED 700MA72LED 350MA72LED 530MA72LED 700MA
35K41K56K
R2R3R4R5
120 208240277347 1
480 1
PT3 2
PT4 3
PT5 2
8H10H12H14H16H 4
18H 4
L/P less pole 5
3C4C5C
PER Twist lock photocontrol receptacle
PE1 NEMA twist & lock PE 120, 208, 240
PE7 NEMA twist & lock PE 277SPD6KV Surge protectionSPD10KV Surge protectionSF Single fuseDF Double fuseLDIM 0-10V dimming 6
FDLxx Festoon outlet less electrical 7
DBL BlackDDB Dark bronzeDNA Natural aluminumDWH White
H
D
HANDHOLE ORIENTATION
Handhole
A
B
C
D
IMPORTANT INSTALLATION NOTES: • Do not erect poles without having fixtures installed.• Factory-supplied templates must be used when setting anchor bolts.
Lithonia Lighting will not accept claim for incorrect anchorage place-ment due to failure to use Lithonia Lighting factory templates.
• If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
• Lithonia Lighting is not responsible for the foundation design.
Specifications
Ordering Information EXAMPLE: TLPRO152 108LED 350MA 41K R3 120 PT4 10H 4C DBL
NOTES1 Not available with 530MA.2 Includes clamshell base.3 Includes tilting pole or clamshell base.4 Requires 5C shaft PT5 mounting and clamshell base.5 Will include clamshell base only.6 Not available with clamshell.7 Specify location and orientation when ordering option.
For 1st “x”: Specify the height in feet above base of pole. Minimum height of festoon is 3ft above base. Example: 5ft = 5 and 20ft = 20 For 2nd “x”: Specify orientation from handhole (A,B,C,D). Refer to the Handhole Orientation diagram left.
Catalog Number
Notes
Type
IntroductionThe architecturally stimulating Ratio Post Top is unmatched with a unique look and unparalleled performance that blends seamlessly within any environment.The outstanding optical design and specialized lenses of each LED produce sites with remarkable uniformity. The Ratio Post Top is mounted using an internal expansion collar perfect for single-bolt tightening and auto leveling functionality. It is ideal for replacing 150W to 400W metal halide lamps with typical energy savings of 55% and delivered lumens of 5,300 - 17,700.
EPA: 0.92 ft2
Diameter: 24-1/2”(62.2 cm)
Height: 27”(68.6 cm)
Weight : 45 lbs(20.4 kg)
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
Ratio Post Top 1.52TLPRO152LED Area Luminaire
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Actual wattage may differ by +/- 8% when operating between 120-480V +/-10%. Contact factory for performance data on any configurations not shown here.
Performance Data
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved.
Lumen Output
TLPRO152
Rev. 08/26/14
Number of LED's
DriveCurrent
(mA)
Dist.Type Color Total
Lumens Wattage LPWDrive
Current(mA)
Dist.Type Color Total
Lumens Wattage LPWDrive
Current(mA)
Dist.Type Color Total
Lumens Wattage LPW
35K 7404 59 35K 10276 57 35K 12910 5441K 9287 74 41K 12890 71 41K 16195 6856K 9179 73 56K 12740 71 56K 16006 6735K 8000 64 35K 11103 62 35K 13950 5941K 10035 80 41K 13928 77 41K 17499 7456K 9918 79 56K 13765 76 56K 17295 7335K 7653 61 35K 10622 59 35K 13346 5641K 9600 77 41K 13325 74 41K 16741 7056K 9488 76 56K 13169 73 56K 16546 7035K 8105 65 35K 11249 62 35K 14133 5941K 10167 81 41K 14111 78 41K 17728 7456K 10048 80 56K 13946 77 56K 17522 74
35K 6652 63 35K 9233 60 35K 11600 5841K 8345 79 41K 11582 75 41K 14551 7356K 8247 78 56K 11447 74 56K 14382 7235K 7188 68 35K 9976 65 35K 12534 6341K 9016 85 41K 12514 81 41K 15723 7956K 8911 84 56K 12368 80 56K 15539 7835K 6876 65 35K 9544 62 35K 11991 6041K 8626 81 41K 11972 78 41K 15042 7556K 8525 80 56K 11833 77 56K 14866 7435K 7282 69 35K 10107 66 35K 12698 6341K 9135 86 41K 12679 82 41K 15929 8056K 9028 85 56K 12531 81 56K 15743 79
35K 5281 60 35K 7330 59 35K 9209 5741K 6625 76 41K 9195 74 41K 11552 7256K 6547 75 56K 9088 73 56K 11417 7135K 5706 65 35K 7920 64 35K 9950 6241K 7158 82 41K 9935 80 41K 12482 7856K 7075 81 56K 9819 79 56K 12337 7735K 5459 62 35K 7577 61 35K 9520 5941K 6848 78 41K 9505 77 41K 11941 7456K 6768 77 56K 9394 76 56K 11802 7335K 5781 66 35K 8024 65 35K 10081 6341K 7252 83 41K 10065 81 41K 12646 7956K 7167 82 56K 9948 80 56K 12498 78
3
4
2
3
4
200
161
555
5
2
3
4
5
2
3
4
238
22
3
4
60105309
2
3
4
154 700530
2
3
4
5
2
3
4
5
007181035521053801
4218805327 007035
5
2
3
4
5
FEATURES & SPECIFICATIONS
CONSTRUCTION The luminaire is constructed of high quality cast aluminum parts. The roof is cast aluminum with heat dissipating fins. LED boards are thermally bonded to the luminaire body. The pole is all aluminum, one-piece construction with a 4” diameter extruded shaft, a hinged cast aluminum anchor base, and a two-piece cast aluminum cover.
FINISH The powder coated finish uses premium TGIC polyester powder. The finish is a three-stage process that consists of drying, powder application and curing. Before coating, the parts are treated with a five-stage pretreatment process, consisting of a heated alkaline cleaner, rinse, phosphate coating, rinse, and sealant.
OPTICS The luminaire has eight, ten, or twelve boards with nine high-intensity LEDs per board. Each board features its own optic which has nine individual lenses molded in. The boards are available in 3500 K, 4100 K or 5600 K LED color temperatures, Available optics deliver types 2, 3, 4, and 5 distributions.
ELECTRICAL The Ratio 1.52 features a remote powertray on all versions, keeping the additional heat source of the drivers far away from the LEDs as well as adding the convenience and ability to service the powertray components from the ground. The standard TLPRO152 offers a 4” diameter tilting pole that houses the powertray in the base of the pole. For retrofitting the Ratio 1.52 luminaire to existing poles or installing the luminaire to new, fixed base poles, the Clamshell Base fits around the lower portion of a 3, 4, and 5 inch diameter straight shaft pole and includes a removable powertray inside a gasketed compartment.
INSTALLATION The luminaire is mounted on a 4” hinged pole via an internal expansion collar accessible by removing a cover secured with one 1/4-20 x 5/8” long socket head cap stainless steel screw that is located between luminaire arms. No visible mounting hardware is required. The power assembly tray is installed in the hinged pole when positioned horizontally and affixed to the pole via two self tapping screws. There are two drivers per tray with two wiring harnesses equipped with quick disconnect plugs that attach to the luminaire. The pole is provided with four, 3/4” hot-dip galvanized L-type anchor bolts to be installed on a 8.5” - 10” bolt circle. The bottom of the hinged pole is secured to the anchor base with three, 1/2” hex head stainless steel retaining bolts, split lock washers and flat washers. A two-piece cover is secured with four, 1/4” stainless steel allen head countersunk screws.
The Clamshell Base installs on 3 or 4 inch diameter poles using cast adapter collars, and to 5 inch diameter poles using stainless steel straps. The Clamshell consists of a fixed side and a removable side. The powertray is contained in the removable side. The Clamshell Base is fastened together with four tamper resistant screws.
LISTINGS The luminaire is tested to and meets all NRTL’s outdoor requirement standards, wet location use, through the fully accredited and approved CSA laboratory.
WARRANTY Five-year limited warranty. Full warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Current (A)
Number of LEDs
Drive Current (mA)
System Watts 120 208 240 277 247 347 480
108350 125 1.04 0.60 0.52 0.45 0.51 0.36 0.26530 181 1.50 0.87 0.75 0.65 0.73 0.52 0.38700 238 1.98 1.14 0.99 0.86 0.96 0.69 0.50
90350 106 0.88 0.51 0.44 0.38 0.43 0.31 0.22530 154 1.28 0.74 0.64 0.56 0.62 0.44 0.32700 200 1.67 0.96 0.83 0.72 0.81 0.58 0.42
72
350 88 0.73 0.42 0.36 0.32 0.35 0.25 0.18530 124 1.03 0.60 0.52 0.45 0.50 0.36 0.26700 161 1.34 0.77 0.67 0.58 0.65 0.46 0.33
Electrical Load Projected LED Lumen MaintenanceTo calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours 0 25,000 50,000 100,000
Lumen Maintenance Factor 1.00 >.99 >.95 >.85
Additional Information
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved.
TLPRO152
Rev. 08/26/14
Clamshell Base
Ratio, LED Aluminum Luminaire
HEAD CAPCast aluminum
LUMINAIRE HOUSINGCast aluminum
INTERNAL EXPANSION COLLARTighten internal nut to expand to the inside of pole
QUICK DISCONNECT PLUGS
POLE TOP
HEAD CAP BOLT1/4-20 x 5/8 socket head cap screw
ROOFCast aluminum with heatdissipating fi ns
7.25"
27"
4"
24.5"
3" base height
COVERTwo-piece cast aluminum,
12.63” O.D.
SCREWS(4) 1/4"-20 x 1/2" Long
Stainless steel allen head countersunk screws
POLE SHAFTAluminum,
4” O.D. x .125" wall
RETAINING BOLTS1/2"-13 Stainless steel bolt (3 total)
SPLIT LOCK WASHER1/2" I.D. Split
FLAT WASHER1/2" I.D. Split
BOLT CIRCLE8.5"- 10" diameter
ANCHOR BASECast aluminum, hinged, 12.63" O.D.
ANCHOR BOLT3/4” Hot-dip galvanized
L-type, 55k psi (4 per pole)
LED DRIVERS(2 total)
TWO-PIECE COVER
QUICK DISCONNECT PLUGS(3 total)
Board Confi gurations
Clamshell Assembly
Tilting Pole
10 LED BOARD CONFIGURATION (90 LEDS)
8 LED BOARD CONFIGURATION (72 LEDS)
12 LED BOARD CONFIGURATION (108 LEDS)
FIXED HALF
REMOVABLE POWERTRAY
HALF
5” POLE STRAP ATTACHMENT
3” & 4” POLE ADAPTER COLLAR ATTACHMENT
GROUND
Note: Specifications subject to change without notice.