RTK offers state of the arts laser cutting & steel cutting technologies. This means minimal downtime & higher output resulting in fast turnaround & outstanding service delivery.
Laser Cutting Company Laser Cutting is a technology that uses a laser to cut materials. Laser Cutting is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser Cutting works by directing the output of a high- power laser most commonly through optics. Laser cutting has a low impact on material structure. Edge finish can be varied depending upon the material. Operations such as drilling and slotting can be incorporated into the cutting process, avoiding costly additional work. A Typical Commercial Laser for cutting materials would involve a motion control system to follow a CNC or G-code of the pattern to be cut onto the material.
Transcript
Laser Cutting Company
Laser Cutting is a technology that uses a laser to cut materials. Laser Cutting is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser Cutting works by directing the output of a high- power laser most commonly through optics.
Laser cutting has a low impact on material structure. Edge finish can be varied depending upon the material. Operations such as drilling and slotting can be incorporated into the cutting process, avoiding costly additional work. A Typical Commercial Laser for cutting materials would involve a motion control system to follow a CNC or G-code of the pattern to be cut onto the material.
The focused laser beam directed at the material then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish.
Features :
Advanced Computerized systems with the ability to accept parts information from clients.
Internal systems are designed to allows clients to change part geometry with a minimum of effort and no tooling change.
Total part costs can also be reduced through slot and tab assemblies.
Fast and cost effective alternative to other cutting methods Laser Cutting has distinct time and cost advantages over conventional profile cutting, nibbling and stamping operations. Tooling costs, set up costs and volume penalties are minimized.
How Does Laser Cutting Work? Laser cutting technology offers supreme flexibility, handling profiles from the simplest of components to shapes of almost limitless complexity. So how does it work? Put simply a high-energy infra-red laser light beam is directed onto the material. A focusing lens is used to concentrate all of the energy onto a pin-point, causing rapid localised melting and partial vaporisation of the material. An assist gas, such as oxygen or nitrogen is then directed through a nozzle to expel the molten material. The position of the laser beam is precisely controlled by computer program - also known as CNC code - driving the X and Y axes of the CNC machine. The CNC computer or controller adjusts the power of the laser beam dynamically to ensure that that the laser power is optimised for the current cutting speed. For more information, please visit this site: http://www.rtkindustries.com.au
