www.sterlco.com
Performance
Portabil ity
Longevity
Over 20 years of wheel dryer expertise
packed into a high performance,
compact, portable design.
Blending | Conveying | Dr ying
Process Cool ing | Heat Transfer | S ize Reduction
RDX Series DryersC o m p a c t D e s i c c a n t W h e e l D r y e r s
The new RDX has much to offerPacked with Performance
The RDX is the ideal dehumidifying wheel dryer to integrate with your central loading system or to handle multiple hoppers. It offers more features as standard equipment with a smaller footprint than comparable systems, giving you maximum performance in minimal space.
Ideal for Bottle Production
The ideal unit when exceptional quality is imperative, the RDX maintains stable IV and low AA levels, and brings moisture content below 50 ppm. It can dry PET in as little as 3 hours.
Touchpad Programming
An easy-to-use touchpad simplifies programming, enabling you to preset operations, monitor settings, view progress and make changes effortlessly.
Energy-Saving Production
Insulated stainless steel construction prevents heat loss while drying resin in half the time, saving hours of energy with every material change.
Virtually Maintenance-Free
Decades of research and development have been poured into our desiccant wheel technology, resulting in a one-of-a-kind desiccant wheel specifically designed for the rigors of the plastics industry. Our desiccant wheel is expected to run up to 15 years, and is backed by an industry leading 10-year warranty. Heater circuits have solid state relays, providing 10 years of maintenance-free operation. Routine maintenance can be performed from the front of the system, quickly and easily.
Regeneration Blower
To Desiccant Rotor
Drying Blower
Sterling’s desiccant wheel technology is specifically designed for the plastics industry and delivers optimal performance. Its unique, honeycomb design—molecular sieve desiccant, bonded and then baked onto ceramic paper—eliminates powder that can contaminate the system. Its large contact area effectively absorbs at high temperatures, drying resin in half the time while stabilizing dew points at a constant –40°F.
Desiccant Rotor Technology Cuts Drying Time
RDX SERIES DESICCANT WHEEL DRYER
RDX SERIES DESICCANT WHEEL DRYERS | www.sterlco.com 2
Regeneration Heating Zone
Cooling Zone
Dehumidifying Zone
The stream of air inside the rotor
Compare to the competition:Drop moisture levels faster.
Start molding sooner.
Regeneration Heating Air
Return Air
Dehumidified Air
Moisture Removed from Rotor
Regeneration Exhaust
Return Air
Dehumidified Process Air
Regeneration Air Filter
Regeneration Blower
To Desiccant Rotor
Desiccant Wheel
Regeneration Heater
Drying Blower
Aftercooler
*The remote process heater can be mounted on the drying hopper or the side of the dryer.
Central Drying Option Feed multiple material hoppers with a single dryer. Each hopper comes with a remote process heater and optional booster blower.
Dew Point MeterMeasures and displays the process dew point for quick performance reference.
Alarm Light & Horn Provides visual and audible alerts if a fault occurs. Mounted on top of the dryer for maximum visibility.
Weekly Timer Program the dryer to start and stop automatically any day of the week.
Options to Help You Get More from Your Production Floor.
Resin RDX-P Other Desiccant Dryers Dryers
Polycarbonate 2.0 hours 3–4 hours Nylon 3.0 hours 4–6 hours PET 3.5 hours 6–8 hours
Multi-Tower Type Dehumidifier
Sterling Desiccant Wheel Dryer
The RDX dries resin faster.
The RDX-P stabilizes dew points.
sterlco.com
Rev 11.20.2018
RDX SERIES SPECIFICATIONS
Portable Cart & Central Dryer Configurations Outer Dimensions of Hopper Dryer (inches)
Available Options Weekly Timer, Dew Point Meter, Alarm Horn, Alarm Light, Portable Cart, Insulated Hopper
RDX Model 25 75 150 200 300
Dew Point (°F) -40
Airflow (cfm) 23 47 70 106 165
Available Hoppers (lbs.)
Hopper Volume (ft3) 0.85-1.8 2.6-5.3 5.3-10.6 10.6-14.1 14.1-21.2
Drying Blower (kw) .50 .85 1.55 1.75 2.55
Regeneration Blower (kw) .057 .113 .420 1.15
Drying Heater (kw) 1.5 (2.1H) 2.4 (4.0H) 3.3 (6.0H) 4.0 (7.8H) 6.0 (12.4H)
Regeneration Heater (kw) 2.5 3.2 4.0 7.7 9.0
Absorbent/ Desiccant Zeoliterotor
Desiccant Drive Motor (kw) .015
Aftercooler Flow (gpm) 1.5 3.7 4.0 4.0 5.2
Water Connection (in) 3/8”
Control Microprocessor w/PID Heating
Auto Start Timer Range: 10-min to 99hrs 50min
Alarm & Protection Overheat, Thermal Trip, Reverse Phase, Automatic Cool Down
Power Supply (Volts) 230V or 460V 3ph, 60Hz
Maximum Temperature 266°F (H-356°F)
Breaker-Amps (230/460V) 20/20 30/40 40/50 50/30 75/40
Hi-Temp Model 60/40 100/50
Weight (lbs) 264 352 440 760 800
Approximate Dimensions (inches) 17x22x52H 20x28x53H 31x35x72H
Model A B SD0.85 14 25 WH-30 17.2 28 WH-50 17.2 36.6 WH-75 20.2 36.6 WH-100 20.2 45.2 WH-150 23.5 50.7 WH-200 23.5 62.2 WH-300 32.7 68.6 WH-400 32.7 78.5 WH-600 39 81.3 WH-800 39 97.1
A
SingleHopper
DoubleHopper
CentralDryer
B
ACS Group | 2900 South 160th Street, New Berlin, WI 53151
P: 1.262.641.8600 E: [email protected] W: acscorporate.com