Date post: | 28-Mar-2015 |
Category: |
Documents |
Upload: | vilaschodankar |
View: | 721 times |
Download: | 9 times |
CONCRETE
RECKLI Australia & New Zealand Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 AustraliaPostal Address: PO Box 120 Sunshine Victoria 3020 Australia Mobile: 0418 176 044 Fax: 03 8361 7186 Email: [email protected] Web: www.reckli.com
National Precast Concrete Association Australia
(Associate Member)
Member
Changing the face of concrete
2009 Catalogue
Changing the face of concrete
...To ThisFrom This...
Make Your Own MouldsBalastrades Moulds
Supersedes our previous “2008 Catalogue” and now allows for 14 NEW extra pages and patterns2009 Catalogue
TICK CIRCULATION
For extra copies:please email:
[email protected] or fax: 03 8361 7186
RECKLI are suppliers of Rubber Moulds & Form-Liners for patterns on concrete panels & other concrete elements. RECKLI offers flexible & re-usable mould liners for architectural concrete/GRC units. RECKLI moulds will assist in increasing kerb appeal, enhancing architectural expression & integrate structures with their surroundings.
Reckli OfficesGermany (Head Office)
AndorraAustraliaAustriaBelgiumCanada
China x2Finland x2FranceHong KongIndiaIran
IrelandIsrealItalyMalaysiaNetherlandsNew Zealand
NorwayPolandPortugalRussiaSaudi ArabiaSingapore
South KoreaSpainSwedenTaiwanThailandTurkey
U.A.EU.S.AUK x2
Noise Reduction Wall Formliner Standard Patterns
Liquid rubber: For Make-your-own formliners and mould and pattern making as well as for the surfaces protection. The complex area of application goes form the preservation of monuments and restoration of valuable elements of buildings, as well to the mould making in the porcelain and ceramic industry.
Custom Patterns
CONCRETE
MOULDS
By
Precast Elements Insitu-Cast Elements Stack/Site Cast ElementsGRC - Glass Re-inforced Concrete Prestressed Elements
If Reckli formliners are used as outlined in our application guide, we guarantee 50 re-uses for standard formliners with a prefix 1/xx and 100 re-uses for formliners with a prefix 2/xx.Our support against liability under any proven claims and compensation is limited the value of the purchase price or replacing that portion of defective formliner(s).
Sam Burrone Design 03 9734 1424
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Visit our Website for a full view of these patterns: www.reckli.com Changing the face of Concrete
G.R.C. (Glass Fibre Reinforced Concrete) Examples
Page 42
RECKLI moulds can beused on:
Acoustic Panels & Walls
Noise Barriers
Block Retaining Walls
Decorative Finishes
Moulds for Exterior Ornaments
Landscape Elements
Decorative Concrete
Retaining Walls Design
RECKLI is a world leader in the design and manufacture of elastic formliners and moulds and liquid rubbers for the production of such formliners and moulds.
Formliners:For attractive surface modulation and shaping of exposed concrete. RECKLI Formliners are used in precasting factories and in cast-in-situ concrete. Since 1968, we have the experience with structured formliners, competence in all questions about textured and exposed concrete and Millions square metres of structured concrete as reference and trusted evidence.
Auxiliary products:Like Demoulding Materials, Formliners Adhesive and Cleanser, Filler and Thickener or cement-bound products supplement our range and offer the user a suitable solution for users own requirements.
Using RECKLI formliners
Formliners come in a range of decorative shapes & textures
...To ThisFrom This...
Actual rubber mould
Reckli formliners are perfect when you need repetitive & consistent results
...To ThisFrom This...
Actual rubber mould
2/175 Friesland Formliner
Moulds forGRC tiles
Index and Pattern GroupsDisplay Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Graphic & Photo Engraved TechnologyPage 36-37
Oriental PatternsPage 34
Wood PatternsPage 8-16
Rough Cast & Textured PatternsPage 6-7
Broken Rib PatternsPage 3-5
Geometric PatternsPage 33
Rib & Wave PatternsPage 30-33
Brick & Masonry PatternsPage 21-26
Abstract PatternsPage 17-20
Stone & Rock PatternsPage 27-29
Anti Slip PatternsPage 35-36
General ExamplesPage 38-42
Changing the face of Concrete
View gallery of samples at
The Melbourne Display Centre
Building 1, 123 Pipe Rd
North Laverton Victoria Australia
Page 2
1/45 B-SiciliaWeb Link: www.reckli.de/1_45.htm
[mm]
side elevation
1/41 B-IbizaWeb Link: www.reckli.de/1_41.htm
[mm]
side elevation
15 35
52
388
995
7200
1/29 KreteWeb Link: www.reckli.de/1_29.htm
[mm]
side elevation
100Ø 30 Ø 70
10
50
995
4800
1/09 B-NorderneyWeb Link: www.reckli.de/1_09.htm
[mm]
side elevation
10
4525
30 150100
995
5000
1/347 B-Fort de FranceWeb Link: www.reckli.de/1_347.htm
[mm]
side elevation
45
4870
8
221055
6000
60
54 24 503939
10
1020
5000
Precast Panels Using “1/21 B-Malta” Pattern
1/21 B-MaltaWeb Link: www.reckli.de/1_21.htm
[mm]
side elevation
15 35
5238
8
995
5000
Page 3
Broken Rib PatternsBroken Rib PatternsDisplay Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
All patterns on this page are available in 3 weeks
Precast Panels Using “1/09 B-Norderney” Pattern
PROJECT EXAMPLE
SEE PAGE 39
Go to weblink of each pattern for actual project reference of particular pattern
1/38 B-Rippe Type KWeb Link: www.reckli.de/1_38.htm
[mm]
side elevation
70 Ø 50
4430
20
10
1045
4000
1/316 B-PennsilvaWeb Link: www.reckli.de/1_316.htm
[mm]
side elevation
32
38 7
8
1165
6050
1/37 B-Rippe Type JWeb Link: www.reckli.de/1_37.htm
[mm]
side elevation
19
8
27 27
28
1225
4950
Precast Panels Using “1/316 B-Pennsilva” Pattern - Gravity Water Tower
2/56 B-GaronneWeb Link: www.reckli.de/2_56.htm
[mm]
side elevation
Ø 40Ø 20
12515
26167
4000 / 7300
7300
/ 40
00
1/124 B-TaroWeb Link: www.reckli.de/1_124.htm
side elevation
[mm]
27
802030
8
995
7000
Precast Panels Using “2/56 B-Garonne” Pattern
“1/38 B-Rippe Type K” Pattern UsedOn This Housing Development
Broken Rib PatternsBroken Rib PatternsDisplay Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Precast Panels Using “1/316 B-Taro” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Page 4All patterns on this page are available in 3 weeks
2/107 B-MekongWeb Link: www.reckli.de/2_107.htm
[mm]
side elevation
2/106 B-AmurWeb Link: www.reckli.de/2_106.htm
[mm]
side elevation
7
1020
14
3800
6900
2/108 B-IndusWeb Link: www.reckli.de/2_108.htm
[mm]
side elevation
6
15Ø10
11
3800
7000
6 19
30
8
30 30
3800
6900
2/87 B-OhioWeb Link: www.reckli.de/2_87.htm
[mm]
side elevation
7
Ø 30 42
2317
5000
3300
2/30 B-HavelWeb Link: www.reckli.de/2_30.htm
[mm]
side elevation
Ø 2233
197
3800 / 7300
7300
/ 38
00
Precast Balconies Using “2/30 B-Havel”Pattern - Apartment Complex
1/126 B-LarnakaWeb Link: www.reckli.de/1_126.htm
[mm]
side elevation
10010
353026
8
995
5000 “1/126 B-Larnaka”
Pattern UsedIn Bridge AbutmentRetaining Wall
“2/108 B-Indus” Pattern Used For ThisParklands Gate House
Broken Rib PatternsBroken Rib PatternsDisplay Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Page 5 All patterns on this page are available in 3 weeks
2/150 B-VosgesWeb Link: www.reckli.de/2_150.htm
[mm]
side elevation
30 19 237
Ø10
1240
6000
Go to weblink of each pattern for actual project reference of particular pattern
2/76 NilWeb Link: www.reckli.de/2_76.htm
[mm]
side elevation
612
7000
3900
2/104 SambesiWeb Link: www.reckli.de/2_104.htm
[mm]
side elevation
136
10000
4000
2/93 Red RiverWeb Link: www.reckli.de/2_93.htm
[mm]
side elevation
8000
3800
86
2/105 EuphratWeb Link: www.reckli.de/2_105.htm
side elevation
[mm]
4000
10000
126
2/103 LenaWeb Link: www.reckli.de/2_103.htm
side elevation
96
10000
4000
[mm]
2/92 Rio BravoWeb Link: www.reckli.de/2_92.htm
[mm]
side elevation
4800
3350
96
Precast Panels Using “2/104 Sambesi”Pattern - Apartment Complex
2/62 TevereWeb Link: www.reckli.de/2_62.htm
[mm]
side elevation
87
7300
3800
Page 6All patterns on this page are available in 3 weeks
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Rough Cast and Textured Patterns
2/102 ParanaWeb Link: www.reckli.de/2_102.htm
[mm]
side elevation
10000
4000
86Precast Panels Using “2/92 Rio Bravo”
Pattern - Apartment Complex
Go to weblink of each pattern for actual project reference of particular pattern
2/68 ArnoWeb Link: www.reckli.de/2_68.htm
[mm]
side elevation
2/34 LahnWeb Link: www.reckli.de/2_34.htm
[mm]
side elevation
7000
3000
96
10000
4000
617
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Rough Cast and Textured Patterns
Page 7All patterns on this page are available in 3 weeks
2/91 Rio GrandeWeb Link: www.reckli.de/2_91.htm
[mm]
side elevation
6000
3900
613
2/133 ToscanaWeb Link: www.reckli.de/2_133.htm
[mm]
side elevation
4000
7800
96
2/69 MarneWeb Link: www.reckli.de/2_69.htm
[mm]
side elevation
10000
4000
176
Insitu Panels Using “2/69 Marne” Pattern
2/33 IsarWeb Link: www.reckli.de/2_33.htm
[mm]
side elevation
2/131 LausitzWeb Link: www.reckli.de/2_131.htm
side elevation
2/132 TaunusWeb Link: www.reckli.de/2_132.htm
side elevation
[mm] [mm] 3800
7200
96
3800
7200
96
7000
3000
96
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Go to weblink of each pattern for actual project reference of particular pattern Changing the face of Concrete
Wood Patterns
Page 8All patterns on this page are available in 3 weeks
1/27 SeelandWeb Link: www.reckli.de/1_27.htm
side elevation
[mm]
94
200
15
995
5000
1/28 LollandWeb Link: www.reckli.de/1_28.htm
[mm]
side elevation
7010
995
5000
200
1/03 FehmarnWeb Link: www.reckli.de/1_03.htm
[mm]
side elevation
98-103
5010
995
5000
1/04 FohrWeb Link: www.reckli.de/1_04.htm
[mm]
side elevation
97-103
488
995
5000
1/24 GotlandWeb Link: www.reckli.de/1_24.htm
side elevation
[mm]
10
100
45
995
5000
1/08 MainauWeb Link: www.reckli.de/1_08.htm
[mm]
side elevation
130-170
7010
995
5000
1/07 LangeoogWeb Link: www.reckli.de/1_07.htm
side elevation
[mm] 130-170
7010
995
5000
Insitu Panels Using “1/27 Seeland” Pattern
Insitu Panels Using “1/07 Langeoog” Pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 9 All patterns on this page are available in 3 weeks
1/10 PellwormWeb Link: www.reckli.de/1_10.htm
[mm]
side elevation
8 2032100-160
995
5000
1/18 BornholmWeb Link: www.reckli.de/1_18.htm
[mm]
side elevation4527
55-190
10
995
4500
1/317 RusticWeb Link: www.reckli.de/1_317.htm
side elevation
[mm]
N = Niveau 0, 7, 13, 20 mm
30-100 NN 30-100
NN 278
995
5980
1/01 AmrumWeb Link: www.reckli.de/1_01.htm
[mm]
side elevation
63-6842-47 20-2683-87 2535
8
995
5000
2/168 SommeWeb Link: www.reckli.de/2_168.htm
[mm]
side elevation
20-75
35
8
1270
7900
Precast Panels Using “2/168 Somme” Pattern
NEW
2/167 TrentWeb Link: www.reckli.de/2_167.htm
[mm]
side elevation
238104 95100
2440
8600
NEW
Precast Panels Using “2/167 Trent” Pattern
Insitu Panels Using “1/317 Rustic” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 10All patterns on this page are available in 3 weeks
2/84 MissouriWeb Link: www.reckli.de/2_84.htm
side elevation
2/96 NigerWeb Link: www.reckli.de/2_96.htm
[mm]
side elevation
2/25 EderWeb Link: www.reckli.de/2_25.htm
side elevation
[mm] [mm] 9895102 15
7
3900 / 7470
5300
/ 40
00
7
100100
15
6900
2950
60-110 60-110
N N N
N = Niveau 0, 2, 4, 7 mm
N
137
3800 / 7200
5900
/ 38
00
2/144 SpessartWeb Link: www.reckli.de/2_144.htm
[mm]
side elevation
965
5950
5518
139
1514
1/331 EtampesWeb Link: www.reckli.de/1_331.htm
[mm]
side elevation
25
190
8
945
5500
2/83 TejoWeb Link: www.reckli.de/2_83.htm
[mm]
side elevation
1023
75
6000
3500
2/97 KongoWeb Link: www.reckli.de/2_97.htm
[mm]
side elevation
5
984
7 9
3800
5300
Precast Panels Using “1/331 Etampes” Pattern Precast Panels Using “2/25 Eder” Pattern
PROJECT EXAMPLE
SEE PAGE 40
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 11 All patterns on this page are available in 3 weeks
2/82 ColoradoWeb Link: www.reckli.de/2_82.htm
[mm]
side elevation
1788
147
Fix 1065
3000
2/26 ElbeWeb Link: www.reckli.de/2_26.htm
[mm]
side elevation
7
2212115
149
3560 / 7300
5500
/ 38
00
2/163 FraserWeb Link: www.reckli.de/2_163.htm
side elevation
[mm]
8 13
9650
995
200
8017
015
012
018
010
0
2/74 UralWeb Link: www.reckli.de/2_74.htm
[mm]
side elevation
1297
690
3900 / 7300
5600
/ 38
00
2/20 AhrWeb Link: www.reckli.de/2_20.htm
side elevation
[mm]
90
8
3800 / 7300
6700
/ 38
00
2/51 SpreeWeb Link: www.reckli.de/2_51.htm
[mm]
side elevation
15102
147
3800 / 7300
7300
/ 38
00
2/73 TisaWeb Link: www.reckli.de/2_73.htm
[mm]
side elevation
107
83
Fix 995
4000
Precast Panels Using “2/82 Colorado” Pattern
Precast Walls Using “2/73 Tisa” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 12All patterns on this page are available in 3 weeks
2/27 EmsWeb Link: www.reckli.de/2_27.htm
[mm]
side elevation
100
8
3800 / 73007000
/ 38
00
150-
250
Precast Panels Using “2/27 EMS”Pattern - Rail Station Platform
2/22 AltmuhlWeb Link: www.reckli.de/2_22.htm
[mm]
side elevation
90
8
3800 / 7300
6850
/ 38
00
2/21 AllerWeb Link: www.reckli.de/2_21.htm
side elevation
[mm]
8
90
3800 / 7200
5300
/ 38
00
2/24 DonauWeb Link: www.reckli.de/2_24.htm
[mm]
side elevation
9
170
7
3800 / 7300
4400
/ 38
00
2/23 AlsterWeb Link: www.reckli.de/2_23.htm
[mm]
side elevation
160-180
8
3800 / 7250
4450
/ 38
00
Precast Panels Using “2/27 EMS” Pattern
Rail Station Wall Using “2/23 Alster” Pattern Retaining Walls Using “2/24 Donau” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 13 All patterns on this page are available in 3 weeks
1/20 KerkyraWeb Link: www.reckli.de/1_20.htm
[mm]
side elevation
2010
35
100
995
5000
150
100
50
2/32 InnWeb Link: www.reckli.de/2_32.htm
[mm]
sectional profile
2/48 RuhrWeb Link: www.reckli.de/2_48.htm
sectional profile
2/337 MiramasWeb Link: www.reckli.de/2_337.htm
sectional profile
[mm] [mm]
2/116 ArdecheWeb Link: www.reckli.de/2_116.htm
[mm]
side elevation
228
3800
6400
2/28 EmscherWeb Link: www.reckli.de/2_28.htm
[mm]
side elevation
19250
7
7000
3750
7
8-18 18
3800 / 7250
7300
/ 38
00
13-26 217
1005
6050
18 177
3800 / 7300
7300
/ 38
00
2/31 IllerWeb Link: www.reckli.de/2_31.htm
[mm]
sectional profile
4-11
147
3800 / 7300
6700
/ 38
00
2/47 RheinWeb Link: www.reckli.de/2_47.htm
[mm]
side elevation
25
20
5
3800 / 7300
7300
/ 38
00
1/05 HelgolandWeb Link: www.reckli.de/1_05.htm
[mm]
side elevation
1/06 JuistWeb Link: www.reckli.de/1_06.htm
side elevation
[mm]
1/02 BorkumWeb Link: www.reckli.de/1_02.htm
[mm]
side elevation
5510
100995
5000
100
200
66
200
100
1/17 WollinWeb Link: www.reckli.de/1_17.htm
side elevation
[mm] 100
4510
995
5000
9595
10 30250 12525 25
995
5000
3012525025 25 10
995
5000
Precast Walls Using “2/116 Ardeche” Pattern
Precast Walls Using “2/47 Rhein” Pattern Precast Wall Using “2/47 Rhein” Pattern
Precast Walls Using “1/17 Wollin” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 14All patterns on this page are available in 3 weeks
1/12 RugenWeb Link: www.reckli.de/1_12.htm
[mm]
side elevation
200100
10N N NNN
N = Niveau 0, 5, 8,15, 25
35
995
5000
2/53 WeserWeb Link: www.reckli.de/2_53.htm
[mm]
side elevation
5150
19
3800 / 7300
7300
/ 38
00
1/05 HelgolandWeb Link: www.reckli.de/1_05.htm
[mm]
side elevation
10 30250 12525 25
995
5000
1/06 JuistWeb Link: www.reckli.de/1_06.htm
side elevation
[mm]
3012525025 25 10
995
5000
1/02 BorkumWeb Link: www.reckli.de/1_02.htm
[mm]
side elevation
5510
100995
5000
100
200
66
200
100
Precast Walls Using “2/53 Weser” Pattern
Precast Walls Using “1/12 Rugen” Pattern Precast Walls Using “1/12 Rugen” Pattern
Precast Walls Using “1/05 Helgoland” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
1/15 UsedomWeb Link: www.reckli.de/1_15.htm
[mm]
side elevation
68 125125
50
10
4526
29995
5000
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 15 All patterns on this page are available in 3 weeks
1/25 BaltrumWeb Link: www.reckli.de/1_25.htm
[mm]
side elevation
120 806
15
6023
46
995
5000
1/26 AmelandWeb Link: www.reckli.de/1_26.htm
[mm]
side elevation
109014019060
N = Niveau 0, 10, 20, 30, 45
N N N NN40
55
995
5000
2/43 NaheWeb Link: www.reckli.de/2_43.htm
[mm]
side elevation
21-2495-100
26-3033-37
187
3700 / 7200
7200
/ 37
00
2/48 RuhrWeb Link: www.reckli.de/2_48.htm
side elevation
[mm]
7
8-18 18
3800 / 7250
7300
/ 38
00
2/337 MiramasWeb Link: www.reckli.de/2_337.htm
side elevation
[mm]
13-26 217
1005
6050
Precast Walls Using “2/48 Ruhr” Pattern
Precast Walls Using “2/337 Miramas” Pattern
Precast Walls Using “1/15 Usedom” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Wood Patterns
Page 16All patterns on this page are available in 3 weeks
2/154 VentaWeb Link: www.reckli.de/2_154.htm
[mm]
side elevation
8265 - 30
1005
2490
2/155 Venta inversWeb Link: www.reckli.de/2_155.htm
side elevation
[mm]
8265 - 30
1005
2490
2/152 MartiniqueWeb Link: www.reckli.de/2_152.htm
side elevation
[mm]
338
1245
4990
5-40
2/153 Martinique inversWeb Link: www.reckli.de/2_153.htm
side elevation
[mm]
833
5-40
1245
4990
Precast Bridge Abutment & Earth RetainingWalls Using “1/12 Rugen” Pattern
2/32 InnWeb Link: www.reckli.de/2_32.htm
[mm]
side elevation
18 177
3800 / 7300
7300
/ 38
00
2/31 IllerWeb Link: www.reckli.de/2_31.htm
[mm]
side elevation
4-11
147
3800 / 7300
6700
/ 38
00
Precast Walls Using “2/154 Venta” Pattern
Precast Walls Using “2/152 Martinique” Pattern
Precast Walls Using “2/32 Inn” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Abstract Patterns
Page 17 All patterns on this page are available in 3 weeks
2/37 LenneWeb Link: www.reckli.de/2_37.htm
[mm]
side elevation
85
7300
3800
2/61 ThamesWeb Link: www.reckli.de/2_61.htm
[mm]
side elevation
86
3900 / 7500
8750
/ 40
00
2/98 VltavaWeb Link: www.reckli.de/2_98.htm
[mm]
side elevation
96
7400
3400
2/169 ColumbiaWeb Link: www.reckli.de/2_169.htm
[mm]
side elevation
8
36
80-155
3960
4950
2 x 1980
NEW
2/42 NaabWeb Link: www.reckli.de/2_42.htm
[mm]
side elevation
145
3800 / 7300
7400
/ 38
00
2/162 SacramentoWeb Link: www.reckli.de/2_162.htm
[mm]
side elevation
40-250
8 40
2400
2330
Feature Wall Using “2-42 Naab” Pattern
Precast Panels Using “2-169 Columbia” Pattern Precast Panels Using “2-162 Sacramento” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Abstract Patterns
Page 18All patterns on this page are available in 3 weeks
1/14 SyltWeb Link: www.reckli.de/1_14.htm
[mm]
side elevation
5335
2810
10050
995
4980
NEW
Precast Panels Using “1/14 Sylt” Pattern
1/43 CorseWeb Link: www.reckli.de/1_43.htm
[mm]
side elevation
8
55 45 25 15 38
995
5000
1/44 B-SardegnaWeb Link: www.reckli.de/1_44.htm
[mm]
side elevation
55 4525 3610
995
5000
2/44 NeckarWeb Link: www.reckli.de/2_44.htm
[mm]
side elevation
7
10012
121840
3700 / 7270
7200
/ 38
00
2/49 SaaleWeb Link: www.reckli.de/2_49.htm
[mm]
side elevation
30-90 30-90 30-90
20106
3800 / 7300
7300
/ 38
00
Precast Panels Using “2/44 Neckar” Pattern
Precast Panels Using “2/49 Saale” PatternPrecast Panels Using “2/49 Saale” Pattern
PROJECT EXAMPLE
SEE PAGE 39
PROJECT EXAMPLE
SEE PAGE 39
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Abstract Patterns
Page 19 All patterns on this page are available in 3 weeks
2/45 OderWeb Link: www.reckli.de/2_45.htm
side elevation
[mm]
22-42 18-42 55-180
19
6488
3800 / 7000
7300
/ 38
00
2/57 LoireWeb Link: www.reckli.de/2_57.htm
side elevation
[mm]
18-150 18-150 217
4000
7500
2/50 SiegWeb Link: www.reckli.de/2_50.htm
[mm]
side elevation
7 131077-154
77-1543800 / 7300
7300
/ 38
00
2/59 RhoneWeb Link: www.reckli.de/2_59.htm
[mm]
side elevation
1323
7
80 120
3900 / 7500
7500
/ 40
00
Elevated Road Support-Precast Retaining WallUsing “2/79 Mayenne & 2/59 Rhone” Patterns
Insitu-Cast Panel Using “2/50 Sieg” Pattern
Precast Panel Using “2/45 Oder” Pattern
Precast Panel Using “2/50 Sieg” Pattern
Precast Panel Using “2/45 Oder” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Abstract Patterns
Page 20All patterns on this page are available in 3 weeks
2/174 BreisgauWeb Link: www.reckli.de/2_174.htm
[mm]
side elevation
60
7 11
21
6200
3350
116
32
Precast Panels Using “2/174 Breisgau” Pattern
NEW
2/318 Pierre de SableWeb Link: www.reckli.de/2_318.htm
[mm]
side elevation
137
1800
5700
2/151 GirondeWeb Link: www.reckli.de/2_151.htm
[mm]
side elevation31
8
10000
3000
2/125 DordogneWeb Link: www.reckli.de/2_125.htm
[mm]
side elevation
316
3000
8900
Precast Panel - Boundary Walls Using “2/125 Dordogne” Pattern
Precast Panels Using “2/151 Gironde” PatternPrecast Panels Using
“2/318 Pierre de Sable” Pattern
Precast Panels Using “2/125 Dordogne” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/70 PoWeb Link: www.reckli.de/2_70.htm
[mm]
side elevation
137
235 - 24010
8020
4000
5210
2/39 MainWeb Link: www.reckli.de/2_39.htm
side elevation
[mm]
207
8950
2990
75
2/71 DonWeb Link: www.reckli.de/2_71.htm
side elevation
[mm]
200202
217
7700
14
50
*157
0
* verzahnt · toothed out · raccor dable par emboitement · dentellato · dent ada
127
24010
4000
2000
7112
.3
2/99 SalzachWeb Link: www.reckli.de/2_99.htm
[mm]
side elevation
10
7 12
8900
3650
1052
2/40 MohneWeb Link: www.reckli.de/2_40.htm
[mm]
side elevation
2/65 DrauWeb Link: www.reckli.de/2_65.htm
[mm]
side elevation
24010
7 12
4000
2000
5210
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Brick and Masonry Patterns
Page 21 All patterns on this page are available in 3 weeks
Precast Panels Using “2/99 Salzach” Pattern
Precast Panels Using “2/70 Po” Pattern
Precast Panels Using “2/39 Main” Pattern
235 - 240
235 - 240
Go to weblink of each pattern for actual project reference of particular pattern
1/165 B RenoWeb Link: www.reckli.de/1_165.htm
[mm]
side elevation
36 52 1045
3000
1000
190
10
2/89 DueroWeb Link: www.reckli.de/2_89.htm
[mm]
side elevation
600
127
5960
2970
300
15585
117
6000
3000
585
2/88 TraveWeb Link: www.reckli.de/2_88.htm
[mm]
side elevation
2/141 DachsteinWeb Link: www.reckli.de/2_141.htm
[mm]
side elevation
10
67.5
115 103000
1000
7110
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Brick and Masonry Patterns
Page 22All patterns on this page are available in 3 weeks
Precast Panels Using “2/141 Dachstein” Pattern
Precast Panels Using “1/165 Reno” Pattern
Precast Panels Using “2/89 Duero” Pattern
2/177 WestfaliaWeb Link: www.reckli.de/2_177.htm
[mm]
side elevation
8 17281201620
4350
1490
120
Precast Panels Using “2/177 Westfalia” Pattern
NEW
Go to weblink of each pattern for actual project reference of particular pattern
2/143 SollingWeb Link: www.reckli.de/2_143.htm
[mm] 410-690 7-11
3310
8
3310* 3770
1990
245
-255
* toothed out irregularyside elevation
2/78 GangesWeb Link: www.reckli.de/2_78.htm
[mm]
7 22 27
5120
2280
* 5300
toothed outside elevation
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Brick and Masonry Patterns
Page 23 All patterns on this page are available in 3 weeks
Precast Panels Using “2/130 Pommern” PatternPrecast Panels Using “2/143 Solling” Pattern
2/140 CamargueWeb Link: www.reckli.de/2_140.htm
[mm]
69
108
13
240
* verzahnt
2730
2600
* 2860
190
10
* toothed out side elevation
2/128 HudsonWeb Link: www.reckli.de/2_128.htm
[mm]
15-20 360-365 716 20
* verzahnt
2460
2280
170
-175
15 -
20
* 2640
side elevation toothed out
22
27
5 240-540 8
4590
1350
220
* 4720
5
2/130 PommernWeb Link: www.reckli.de/2_130.htm
[mm]
side elevation toothed outPrecast Panels Using “2/78 Ganges” Pattern
Precast Panels Using “2/128 Hudson” Pattern
170
-175
15 -
20
15-20360-365
Go to weblink of each pattern for actual project reference of particular pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Brick and Masonry Patterns
Page 24All patterns on this page are available in 3 weeks
Precast Panels Using “2/72 Ob” Pattern
2/139 AuvergneWeb Link: www.reckli.de/2_139.htm
[mm] 4-12
150-500
8 1333
* verzahnt
4990
1250
120
* 5150
* toothed outside elevation
2/312 EngadinWeb Link: www.reckli.de/2_312.htm
[mm]
side elevation
26
15-20 60-490
7
2490
1000
45-2
00
160-540
458
20-30
160-
170
/ 340
-360
1400
1500
2/149 TirolWeb Link: www.reckli.de/2_149.htm
side elevation
[mm]
Half joint all around
2/147 AllgauWeb Link: www.reckli.de/2_147.htm
[mm] 160-540
458
20-30
160-
170
/ 3
40-3
60
1400
1500
Half joint all aroundside elevation
2/72 ObWeb Link: www.reckli.de/2_72.htm
[mm]
side elevation
10490
20157
7500
1200
140
9040
10
Precast Panels Using “2/147 Allgau” Pattern
Precast Panels Using “2/139 Auvergne” Pattern
Precast Panels Using “2/312 Engadin” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
1/127 ShannonWeb Link: www.reckli.de/1_127.htm
[mm]
side elevation
30
120-300
8
2000
995
100-
140
120-300
100-
140
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Brick and Masonry Patterns
Page 25 All patterns on this page are available in 3 weeks
Precast Panels Using “2/135 Provence” Pattern
2/137 BourgogneWeb Link: www.reckli.de/2_137.htm
[mm]
side elevation
2212880-550 7-25
2500
2300
80-3
907-
30
2/311 Zyklop Web Link: www.reckli.de/2_311.htm
[mm]
side elevation
20
150-40015-30
6
1250
2510
70-4
00
2/135 ProvenceWeb Link: www.reckli.de/2_135.htm
[mm]
1812830-400 20-45
4970
1230
* 5140
20-2
50
side elevation* toothed out
2/374 La ReunionWeb Link: www.reckli.de/2_374.htm
[mm]
side elevation
844
25-120100-460
4990
1245
120-
390
Precast Panels Using “2/137 Bourgogne” Pattern
2/79 MayenneWeb Link: www.reckli.de/2_79.htm
[mm]
side elevation
32
80-43080-430
7
7000
3000
45-1
4545
-145
“1/127 Shannon” Pattern Used InsituCast Method For This Floodway
PROJECT EXAMPLE
SEE PAGE 40
Go to weblink of each pattern for actual project reference of particular pattern
1/354 DuranceWeb Link: www.reckli.de/1_354.htm
[mm]
side elevation
1070
2525
1075
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Brick and Masonry Patterns
Page 26All patterns on this page are available in 3 weeks
Precast Panels Using “1/354 Durance” Pattern
2/160 Via AppiaWeb Link: www.reckli.de/2_160.htm
[mm]
side elevation
843
130-51010-35
1850
5000
70-1
70
Precast Panels Using “2/147 Allgau” Pattern
Precast Panels Using “2/353 Tarn” Pattern
2/146 AndaluciaWeb Link: www.reckli.de/2_146.htm
[mm]
8
40-400 5-20
38
3990
1060*1200
30-2
00
toothed out irregularyside elevation
2/353 TarnWeb Link: www.reckli.de/2_353.htm
[mm]
side elevation
36
170-55015-40
167
4350
1145
45-2
50
2/161 EsterelWeb Link: www.reckli.de/2_161.htm
[mm]
side elevation
838
6000
1250
2/164 BrabantWeb Link: www.reckli.de/2_164.htm
side elevation
[mm]
The total size of this pattern consist of 4 di�erent toothed out formliner parts.
438
5-35100-520
3000
10000
20-1
30
4200+5800
2 x
1500
Precast Panels Using “2/146 Andalucia” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/90 TravertinWeb Link: www.reckli.de/2_90.htm
[mm]
side elevation
137
3600
4650
2/123 TennesseeWeb Link: www.reckli.de/2_123.htm
[mm]
side elevation
6 9
2700
3000
“2/123 Tennessee” Pattern UsedIn This Office Block
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Stone and Rock Patterns
Page 27 All patterns on this page are available in 3 weeks
2/156 SteinwaldWeb Link: www.reckli.de/2_156.htm
[mm]
side elevation
36
8
6000
3000
2/157 FichtelbergWeb Link: www.reckli.de/2_157.htm
[mm]
side elevation
6000
3000
198
2/166 CilentoWeb Link: www.reckli.de/2_166.htm
side elevation
[mm]
10 12
6600
2950
Precast Panels Using “2/90 Travertin” Pattern
Precast Panels Using “2/156 Steinwald” Pattern Precast Panels Using “2/157 Fichtelberg” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/122YukonWeb Link: www.reckli.de/2_122.htm
[mm]
side elevation
277
3800
5900
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Stone and Rock Patterns
Page 28All patterns on this page are available in 3 weeks
2/158 BavariaWeb Link: www.reckli.de/2_158.htm
[mm]
side elevation
846
3050
5900
2/159 LuganoWeb Link: www.reckli.de/2_159.htm
[mm]
side elevation
818
3200
7800
2/121 Cheyenne Web Link: www.reckli.de/2_121.htm
[mm]
side elevation
46
7
7000
7000
5 x 1400
2/145 Schiefer Web Link: www.reckli.de/2_145.htm
side elevation
[mm]
714
860
- 870
2190 - 2390?
2/173 Santa CruzWeb Link: www.reckli.de/2_173.htm
[mm]
side elevation
47
7
4980
6000
4 x 1245
NEW
Precast Panels Using “2/121 Cheyenne” Pattern Precast Panels Using “2/121 Cheyenne” Pattern
Precast Panels Using “2/122 Yukon” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
Precast Panels Using “2/170 Romanche” Pattern
2/136 BretagneWeb Link: www.reckli.de/2_136.htm
[mm]
60-180 10-40
834
2900
1000
*2950
* verzahnt · toothed out · raccor dable par emboitement · dentellato · dent ada side elevation
2/142 TessinWeb Link: www.reckli.de/2_142.htm
[mm]
side elevation
40-100 10-30
188
800
4800
96
1/352 EmbrunWeb Link: www.reckli.de/1_352.htm
[mm]
side elevation
50
60-20010-50
8
2720
1050
“1/352 Embrun” Pattern Used As StripFeature On Office Complex
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Stone and Rock Patterns
Page 29 All patterns on this page are available in 3 weeks
“2/121 Cheyenne” Pattern Used AsNoise Barrier Walls
2/41 MoselWeb Link: www.reckli.de/2_41.htm
[mm]
side elevation
145
7300
3400
“2/41 Mosel” Pattern Used In Car Park Complex
2/170 RomancheWeb Link: www.reckli.de/2_170.htm
[mm]
side elevation
24-83 8
26
1950
5400
NEW
Precast Panels Using “2/136 Bretagne” Pattern
PROJECT EXAMPLE
SEE PAGE 40
Go to weblink of each pattern for actual project reference of particular pattern
Precast Panels Using “1/31 Rippe Type C” Pattern
2/77 TigrisWeb Link: www.reckli.de/2_77.htm
[mm]
side elevation
1192422 18
8
5600
3600
1/31 Rippe Type CWeb Link: www.reckli.de/1_31.htm
[mm]
side elevation
4060 40
10
50
995
5000
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Rib and Wave Patterns
Page 30All patterns on this page are available in 3 weeks
1/30 Rippe Type AWeb Link: www.reckli.de/1_30.htm
1/32 Rippe Type DWeb Link: www.reckli.de/1_32.htm
1/39 Rippe Type LWeb Link: www.reckli.de/1_39.htm
1/40 Rippe Type MWeb Link: www.reckli.de/1_40.htm
875
50 306020
5000
7010
40 20
5010
955
4800
2535[mm]
side elevation
[mm]
side elevation
15
5510
995
5000
3515[mm]
side elevation
20 4010
995
5000
30 20 Ø3
[mm]
side elevation
1/33 Rippe Type EWeb Link: www.reckli.de/1_33.htm
1/34 Rippe Type FWeb Link: www.reckli.de/1_34.htm
25
1040
1015
4980
3525[mm]
side elevation
1048
975
5000
3811 11[mm]
side elevation
1/35 Rippe Type GWeb Link: www.reckli.de/1_35.htm
1/36 Rippe Type HWeb Link: www.reckli.de/1_36.htm
15 3510
995
5000
25 15
[mm]
side elevation
15 3510
995
5000
35 2525
[mm]
side elevation
Ø3
1/148 LanzaroteWeb Link: www.reckli.de/1_148.htm
[mm]
side elevation
15 35
10
50
60
995
5000
Precast Retaining Wall Using “1/148 Lanzarote” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/75 KocherWeb Link: www.reckli.de/2_75.htm
[mm]
side elevation
760 4060
23
1400
5500
Precast Elevated Road Support Columns Using “Non-Std” Rib Formliner
Precast Panels Using “1/46 Rippe Type N” Pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Go to weblink of each pattern for actual project reference of particular pattern Changing the face of Concrete
Rib and Wave Patterns
Page 31 All patterns on this page are available in 3 weeks
1/46 Rippe Type NWeb Link: www.reckli.de/1_46.htm
[mm]
side elevation
854075 50
5010
995
5000
1/134 RivieraWeb Link: www.reckli.de/1_134.htm
[mm]
side elevation
45
8
Ø25
22
Ø25
985
5000
2/94 OrinocoWeb Link: www.reckli.de/2_94.htm
[mm]
side elevation
7
24
35Ø15 Ø15
1890
4800
Precast Wall Using “1/176 Raba” Pattern
1/176 R’abaWeb Link: www.reckli.de/1_176.htm
[mm]
side elevation
1050
30-120 20-80
1095
4500
NEW
Precast Panels Using “2/75 Kocher” Pattern
Precast Panels Using “2/94 Orinoco” Pattern
PROJECT EXAMPLE
SEE PAGE 41
2/63 WislaWeb Link: www.reckli.de/2_63.htm
[mm]
side elevation
Ø 105 127
3900
7300
2/29 FuldaWeb Link: www.reckli.de/2_29.htm
[mm]
side elevation
Ø 22 33
197
3800 / 7300
7300
/ 38
00
Precast Elevated Road Support Columns Using “Non-Std” Rib Formliner
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Rib and Wave Patterns
Page 32All patterns on this page are available in 3 weeks
1/42 MadeiraWeb Link: www.reckli.de/1_42.htm
[mm]
side elevation
125Ø 45
12515
1245
6000
“1/42 Madeira” Pattern Used In Tunnel Entrance
1/172 Sinus 27/100Web Link: www.reckli.de/1_172.htm
[mm]
side elevation
37
10
Ø 54 Ø 54 1001000
5000
1/171 Sinus 18/76Web Link: www.reckli.de/1_171.htm
[mm]
side elevation
76Ø 48Ø 48
268
1060
5000
NEW NEW
Insitu-Cast Wall Using “2/175 Friesland” Pattern
2/175 FrieslandWeb Link: www.reckli.de/2_175.htm
[mm]
side elevation
288
30-1051670
3900
NEW
Precast Panels Using “2/63 Wisla” Pattern
Precast Panels Using “2/29 Fulda” Pattern
PROJECT EXAMPLE
SEE PAGE 1
PROJECT EXAMPLE
SEE PAGE 40
Go to weblink of each pattern for actual project reference of particular pattern
Precast Elevated Road Support Columns Using “Non-Std” Rib Formliner
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Rib and Wave Patterns
Page 33All patterns on this page are available in 3 weeks
Insitu-Cast Wall Using “2/95 Amazonas” Pattern
2/95 AmazonasWeb Link: www.reckli.de/2_95.htm
[mm]
side elevation
7 21
53Ø 32Ø32Fix 1010
4000
Insitu-Cast Wall Using “2/175 Friesland” Pattern
Precast Panels Using “2/95 Amazonas” Pattern
Geometric Patterns
2/327 AurillacWeb Link: www.reckli.de/2_327.htm
[mm]
side elevation
2/340 MiribelWeb Link: www.reckli.de/2_340.htm
side elevation
1/138 AlsaceWeb Link: www.reckli.de/1_138.htm
side elevation
[mm] [mm]
13
187
2080
1130
5000
1712
200 50
1000
2750
7
8
N N N 33N
Niveau = 0, 8, 10, 25
20-130
117529
95
20-130
Precast Panels Using “2/327 Aurillac” Pattern Precast Wall Using “2/340 Miribel” Pattern Precast Panels Using “1/138 Alsace” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/109 Oriental 9Web Link: www.reckli.de/2_109.htm
[mm]
2/110 Oriental 10Web Link: www.reckli.de/2_110.htm
[mm]
side elevation
2/111 Oriental 11Web Link: www.reckli.de/2_111.htm
[mm]
side elevation
side elevation
10577
33
198
113180
1375
85104
7356464 64
3567
26
17
3490
1920
21444721140 88
57
177
3075
1380
2/112 Oriental 12Web Link: www.reckli.de/2_112.htm
[mm]
side elevation
214242 21 717
1070
3080
2/114 Oriental 14Web Link: www.reckli.de/2_114.htm
[mm]
side elevation
2232
33
47
47
9
995
995
2/113 Oriental 13Web Link: www.reckli.de/2_113.htm
[mm]
side elevation
51
4993
35
9
1015
1015
Precast Panels Using “2/112 Oriental 12” Pattern
Non-Std Formliner Pattern Used To MakeGRC Panels For This Oriental Temple
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Oriental Patterns
Page 34All patterns on this page are available in 3 weeks
Precast Panels Using “2/110 Oriental 10” Pattern
Precast Panels Using “2/112 Oriental 12” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/178 AntislipWeb Link: www.reckli.de/2_178.htm
[mm]
side elevation
2/115 PastillenWeb Link: www.reckli.de/2_115.htm
[mm]
side elevation
8
3
7. 5
3200
7900
420 24
97
1400
2900
9.518 5 10
7300
1980
2/118 Riffel 2-FachWeb Link: www.reckli.de/2_118.htm
[mm]
side elevation
9.5 3.532 9
97
3000
1500
2/117 Riffel 5-FachWeb Link: www.reckli.de/2_117.htm
[mm]
side elevation
7
323
429
9
7500
1480
2/120 RhombusWeb Link: www.reckli.de/2_120.htm
[mm]
side elevation
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Anti Slip Patterns
Page 35 All patterns on this page are available in 3 weeks
Precast Flooring Using “2/118 Riffel 2-Fach” Pattern
Precast Flooring Using “2/178 Antislip” Pattern Precast Flooring Using “2/115 Pastillen” Pattern Precast Step Treads “2/120 Rhombus” Pattern
Go to weblink of each pattern for actual project reference of particular pattern
2/119 PikesWeb Link: www.reckli.de/2_119.htm
[mm]
side elevation
97
97
2600
2900
Train Platform Edge Using “2/119 Pikes” Pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Anti Slip Patterns
Page 36
All patterns on this page are available in 3 weeks
Precast Edging Using “2/119 Pikes” Pattern
2/601 CharenteWeb Link: www.reckli.de/2_601.htm
[mm]
side elevation
2/602 SaôneWeb Link: www.reckli.de/2_602.htm
[mm]
side elevation
2/603 VienneWeb Link: www.reckli.de/2_603.htm
[mm]
side elevation
4 82
8 1012
1
7000
3250
8 11
2111
7000
3250
8
72
10 11
7000
3250
12
4
Graphic Formliners
Non Standard Examples Of Graphic Designed Formliners
Go to weblink of each pattern for actual project reference of particular pattern
Original Photo
Photo Engraved Formliner
Finished Concrete Panel
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
Photo Engraved Formliners
Page 37
Visit our Website for a full view of these patterns: www.reckli.com
1
Texture / Application: Self production of rubber mould, with Reckli Pur Elastomer A 55
Reference: Beach pattern, North Sea,Cuxhaven
2 3
4 5
RECKLI-Formliner-system for textured concrete
Kugelbake Theatre
1
Texture / Application: 2/87 Ohio special design / insitu
2
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
General Examples
Page 38
Visit our Website for a full view of these patterns: www.reckli.com
“2-121 Cheyenne” pattern used to create a natural rocklook on earth walls - Albury Wodonga by pass project
“2/337 Miramas” bamboo pattern usedto beautify precast panels in load bearing
position-Orangutan enclosure, Melbourne Zoo
“3/03 Regina” pattern used to create wave/bandon western wall - Footscray police station
“2/49 Saale” pattern used with other non-standard raised patterns “1/43 Corse” pattern used on core wall of lift shaft
“Koru” Maori pattern . Non-standard formliner used to make GRC cladding around internal columns - Auckland Arena, New Zealand
Non Standard Insitu-cast floral pattern noise wall
“1/41 B-Ibiza pattern used in 2 way directional change
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Changing the face of Concrete
General Examples
Page 39
Visit our Website for a full view of these patterns: www.reckli.com
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Visit our Website for a full view of these patterns: www.reckli.com Changing the face of Concrete
General Examples
Page 40
Formliner Mould Assembly In Precast Factory
1/42 MadeiraSide Joining 2 Formliners
2/136 Bretagne Side Joined 2 Mats
Any Brick Mould Formliner
2/79 Mayenne pattern on new rock wall from concrete to match 800+year old Castle in Dublin
Standard Formliner Using Our2/144 Spessart Pattern
Re-arranged For different Effect
2/41 Mosel pattern used as feature in boundary panel
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Visit our Website for a full view of these patterns: www.reckli.com Changing the face of Concrete
General Examples
Page 41
Customised 2/27 EMS - Master Mould Formliner Finished Panel On Site
Master Mould
Gypsum Master Mould Formliner Finished Panel
2/94 Orinoco Pattern
Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]
Visit our Website for a full view of these patterns: www.reckli.com Changing the face of Concrete
G.R.C. (Glass Fibre Reinforced Concrete) Examples
Page 42
RECKLI moulds can beused on:
Acoustic Panels & Walls
Noise Barriers
Block Retaining Walls
Decorative Finishes
Moulds for Exterior Ornaments
Landscape Elements
Decorative Concrete
Retaining Walls Design
RECKLI is a world leader in the design and manufacture of elastic formliners and moulds and liquid rubbers for the production of such formliners and moulds.
Formliners:For attractive surface modulation and shaping of exposed concrete. RECKLI Formliners are used in precasting factories and in cast-in-situ concrete. Since 1968, we have the experience with structured formliners, competence in all questions about textured and exposed concrete and Millions square metres of structured concrete as reference and trusted evidence.
Auxiliary products:Like Demoulding Materials, Formliners Adhesive and Cleanser, Filler and Thickener or cement-bound products supplement our range and offer the user a suitable solution for users own requirements.
Using RECKLI formliners
Formliners come in a range of decorative shapes & textures
...To ThisFrom This...
Actual rubber mould
Reckli formliners are perfect when you need repetitive & consistent results
...To ThisFrom This...
Actual rubber mould
2/175 Friesland Formliner
Moulds forGRC tiles
CONCRETE
RECKLI Australia & New Zealand Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 AustraliaPostal Address: PO Box 120 Sunshine Victoria 3020 Australia Mobile: 0418 176 044 Fax: 03 8361 7186 Email: [email protected] Web: www.reckli.com
National Precast Concrete Association Australia
(Associate Member)
Member
Changing the face of concrete
2009 Catalogue
Changing the face of concrete
...To ThisFrom This...
Make Your Own MouldsBalastrades Moulds
Supersedes our previous “2008 Catalogue” and now allows for 14 NEW extra pages and patterns2009 Catalogue
TICK CIRCULATION
For extra copies:please email:
[email protected] or fax: 03 8361 7186
RECKLI are suppliers of Rubber Moulds & Form-Liners for patterns on concrete panels & other concrete elements. RECKLI offers flexible & re-usable mould liners for architectural concrete/GRC units. RECKLI moulds will assist in increasing kerb appeal, enhancing architectural expression & integrate structures with their surroundings.
Reckli OfficesGermany (Head Office)
AndorraAustraliaAustriaBelgiumCanada
China x2Finland x2FranceHong KongIndiaIran
IrelandIsrealItalyMalaysiaNetherlandsNew Zealand
NorwayPolandPortugalRussiaSaudi ArabiaSingapore
South KoreaSpainSwedenTaiwanThailandTurkey
U.A.EU.S.AUK x2
Noise Reduction Wall Formliner Standard Patterns
Liquid rubber: For Make-your-own formliners and mould and pattern making as well as for the surfaces protection. The complex area of application goes form the preservation of monuments and restoration of valuable elements of buildings, as well to the mould making in the porcelain and ceramic industry.
Custom Patterns
CONCRETE
MOULDS
By
Precast Elements Insitu-Cast Elements Stack/Site Cast ElementsGRC - Glass Re-inforced Concrete Prestressed Elements
If Reckli formliners are used as outlined in our application guide, we guarantee 50 re-uses for standard formliners with a prefix 1/xx and 100 re-uses for formliners with a prefix 2/xx.Our support against liability under any proven claims and compensation is limited the value of the purchase price or replacing that portion of defective formliner(s).
Sam Burrone Design 03 9734 1424