Materialfurnitubes recycled plastic seats are made from high quality preprocessed recycled plastics. Recycled plastic products may show variations in colour and dimensions.
Coloursseats are supplied in brown as standard. other coloured slats are available on request.
Fixingseats are supplied flat-packed, with fixings, tools and instructions for self assembly.
Seat Endsthe Aberdeen and Perth seats are available with rounded leg standards.
the Aberdeen range utilises thick recycled slats to create comfortable eco-friendly furniture. the range consists of a matching seat, bench and table which can be used together within a scheme.
Recycled Plastic seating is not only environmentally friendly, but requires minimal maintenance and is extremely durable and weather resistant.
both the Aberdeen and Perth seats are available with rounded standards, as shown below. these legs are narrower. see technical for further details.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
the Perth range uses the same profile of the Aberdeen but consists of smaller slats placed together. the Perth seat consists of five slats, and is available with matching bench and table.
the Perth bench is also available in hexagonal form, allowing for tree or planters to be placed in the centre.
▲ PERTH HEXAGONAL BENCH show with the PeRtH planter (see tree Protection)
2000
2400
2000
JACK
Donald/Thomas
Harold
Jonathan
Note 1
TECHNICAL
Materialfurnitubes recycled plastic seats are made from high quality preprocessed recycled plastics. Recycled plastic products may show variations in colour and dimensions.
Coloursseats are supplied in brown as standard. other coloured slats are available on request.
Fixingseats are supplied flat-packed, with fixings, tools and instructions for self assembly.
Seat Endsthe Aberdeen and Perth seats are available with rounded leg standards.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
▲ PAISLEY brown recycled slatsgalvanised steel frame
▲ DUNDEE detail
RECYCLED PICNICtables
the Paisley Picnic table combines recycled plastic slats with galvanised steel standards to create hardwearing and durable seating.
the Dundee picnic table is made completely from recycled plastic. these tables are ideal for parks, schools and playing areas. both seats are available in a range of colours.
dundee
Recycled Plastic frame & slats
DUN 1041800mm overall lengthbench & table topbrown Recycled Plastic
options:other colours
paisley
Galvanised steel frame, Recycled Plastic slats
PAT 1042000mm overall lengthbench & table topbrown Recycled Plastic
options:other colours
120 kg155 kg
ploughman timber pg 202
ploughman steel & timber pg 202
timber picnic tables
TECHNICAL
Materialfurnitubes recycled plastic seats are made from high quality preprocessed recycled plastics.
Recycled plastic products may show variations in colour and dimensions.
Coloursseats are supplied in brown as standard. other coloured slats are available on request.
Fixingseats are supplied flat-packed, with fixings, tools and instructions for self assembly.
furnitubes now offer recycled plastic picnic tables. unlike timber, these recycled plastic seats do not knot or splinter, and are environmentally friendly.
ZENITH LONGthe Zenith seat and bench are now available in longer lengths. these 8-foot seats can fit up to five people. ideal for busy and popular areas.
ZENITH TABLEthe Zenith table is now available to complement the Zenith bench. the table is ideal for disabled access.
zenith table
ZEN T6 satin Polished stainless steel with iroko timber slats1840mm overall length
750
450
1840 750
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
furnitubes steel and stainless steel are 100% recyclable.
Timber Finishstandard finish is natural planed. coated timbers and Graffiti Removal system are available on special request.
Base Platesthe Zenith seat and bench are both available with an optional oval base plate for bolt-down fixing on site.
MaterialPlease specify either Grade 304 or Grade 316 when ordering s/steel.
Finishesthe Zenith Range is available in the following finishes:
Enhanced Powder Coatinginvolves a specialist pre-treatment process. Large range of bs/RAL colours are available.
Plastic CoatingHardwearing, high degree of durability and vandal resistance. Available in the following colours:
Seat Heightseat height and arm rests can be an aid when alighting.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Fixingseat feet are pre-drilled at positions shown in blue to allow for fixing down.
Assemblythese products are delivered unassembled.
the Plymouth seat, bench and table are available as root fixed versions as shown below.
▲ Root fixed Plymouth seat
▲ Root fixed Plymouth bench
to accommodate uneven ground conditions furnitubes recommend the root fixed versions Armrests & Heightseats can be supplied with optional arm, as shown below
P 104Hardwood construction’Jotun trebitt teak‘ finish
options:umbrella fittingRoot fixed
1800mm overall lengthbench & table top
P 106Hardwood construction’Jotun trebitt teak‘ finish
options:umbrella fittingRoot fixed
685
1275
ploughman steel & timber
1200mm overall lengthbench & table top
P 204steel subframe, black Plastic coated finishHardwood slatted bench & table top’Jotun trebitt teak‘ finish
options:umbrella fittingRoot fixed
1800mm overall lengthbench & table top
P 206steel subframe, black Plastic coated finishHardwood slatted bench & table top’Jotun trebitt teak‘ finish
options:umbrella fittingRoot fixed
1:25 siDe eLeVAtion 1:100 fRont eLeVAtion
60 kg 88 kg 70 kg 98 kg
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
PLOUGHMAN PICNIC TABLEthe picnic table is available with two different size table-tops. it is a neat, compact unit and is ideal for pub or restaurant gardens where an umbrella hole can be drilled if required. A version with a steel subframe is also now available.
Timber Care & Preservation
furnitubes offers all our customers the
following advice when installing our
range of exterior-use timber seating.
normal weather conditions can cause
shrinkage and cracking in all timber
products, due to their natural reaction
to the elements.
most furnitubes’ timber products are
supplied untreated, enabling application
of the most appropriate preservative for
the particular installation site.
Please see appendices or contact your
local Wood Preservation specialist for
further recommendations.
TECHNICAL
Assemblysupplied in component form for on-site assembly.
Umbrella Fittingtable tops can be drilled for the fitting of an umbrella upon special request. state the diameter of the hole required.
