reddarc.com
Welder Rentals, Welder-Logistics Lease Programs, Welding Equipment Fleet Management
Inverter Stick WeldersMultioperator Inverter Stick PaksInverter Multiprocess WeldersMultioperator Inverter Multiprocess PaksMultiprocess WeldersMultioperator Multiprocess PaksAdvanced Process WeldersSemiautomatic WirefeedersAutomatic WirefeedersAutomatic Welding Tractors and HeadsMultioperator DC ConvertersInduction Heating EquipmentWelding Fume ExtractorsPositioners, Manipulators, Turning RollsDiesel Powered Electric GeneratorsElectric Power Distribution PanelsStud Welders
WELDING AND POWERSOLUTIONS FOR SHIPYARDS
1-866-733-3272
Multiprocess Welders and Multioperator Paks
Inverter Multiprocess Welders and Multioperator Paks
reddarc.com
EX300 300 amp DC CC CV inverter welder/power source EX300 4Pak Multioperator with four 300 amp inverter welder/power sourcesEX300 6Pak Multioperator with six 300 amp welder/power sourcesEX360 350 amp DC CC CV inverter welder/power source EX360 4Pak Multioperator with four 350 amp inverter welder/power sourcesEX360 8Pak Multioperator with eight 350 amp welder/power sources
DC600 600 amp DC CC CV welder/power sourceDC600 4Pak Multioperator with four 600 amp welder/power sourcesDC600 6 Pak Multioperator with six 600 amp welder/power sourcesDC1000 1000 amp DC CC CV welder/power sourceAC1200 1200 amp AC CC power source for NA-4 wirefeedersDC1500 1500 amp DC CC CV power source for LT-7 subarc tractors, and NA-3S and NA-5 automatic welding heads and controls
LN25 PRO-Extreme 325 amp voltage-sensing wirefeederLT-7 Automatic wirefeeder tractor for Submerged-Arc weldingNA-3S Automatic CC or CV DC MIG, Flux-Cored, Submerged-Arc weldingNA-4 Automatic CC AC Submerged-Arc weldingNA-5 Automatic CV DC MIG, Flux-Cored, Submerged-Arc welding
Inverter Stick Welders and Multioperator Paks
ES275i 275 amp DC CC welder ES275i 4Pak Multioperator with four 275 amp welding modules ES275i 6Pak Multioperator with six 275 amp welding modulesES275i 8Pak Multioperator with eight 275 amp welding modules
Wirefeeders, Automatic Welding Heads, Submerged Arc Tractors
Welding and PowerSolutions for Shipyards
Welding Positioners, Manipulators, Turning Rolls
Positioners Various models available with capacities up to 85,000 poundsTurningRollSets Vessel rotation up to 400 tons and 26 feet in diameterWeldingHeadManipulators Models range from 6 feet by 6 feet, up to 18 feet by 18 feet
1-866-733-3272
WeldPreheatingandStressRelievingLiquid-CooledandAir-CooledSystemsReducedSet-Up,FastTime-to-Temperature
With the new ProHeat™ 35 induction heating system, joints can be rapidly and uniformly heated for preheat or stress relief with minimal setup and instruction time. This system induces heat electromagneti-cally rather than by using a heating element.
For more information click www.reddarc.com/IHS or call1-866-733-3272 to speak to an induction-heating specialist.
Induction Heating Equipment
Multioperator DC Converters
MX350300ampCCCVMultioperatorDCWeldingModule
Several MX350 welding modules can be powered by either an electric power-source or an engine-driven power source for DC positive stick, MIG, and SubArc welding processes. Modules are small and fully portable weighing only 59 pounds each. Results in a safer work area since a single, low voltage (60 volts DC) cable can provide power for several welding modules. Delivers high-performance welding control including Hot Start and Arc Force - right at the arc. Each module has a CC stick-soft and CC stick-crisp mode-switch for better control with E6010 and E7018 electrodes. Full remote-control capabilities.
Portable Welding Fume Extractors
Various models are available with capacities up to 1,400 cfm.Rugged stainless-steel construction is ideally suited for shipyard work.Available with either disposable, re-usable, or HEPA filters.
Welding and PowerSolutions for Shipyards
1-866-733-3272Click www.reddarc.com to view our complete product offering.
Diesel Powered Electric Generators
We rent diesel-powered electricgenerators that can supply up to 350 kW(440 kVA) of temporary power for weldingequipment, electric-power-distribution panelsand other shipyard electric-power requirements.
DP4X100 400A 480V input, 4 - 100A 480V receptacles with GFCI breakers DP6X60 400A 480V input, 6 - 60A receptacles with GFCI breakersSB80 Splitter box with 4 - 20 amp 120V duplex receptacles with GFCI breakersDP25 Step-down distribution panel with 6 -20 amp 120V duplex receptacles and 2-30 amp 120/240V single outlet, twist-lock receptacles with GFCI breakersDP75 480/600V 30 kVA step-down transformer with 10 - 20 amp 120V duplex receptacles with GFCI breakers and 2 - 50 amp 120/240V receptacles with GFCI breakersDP225 225A 240/380/480/600V input, 8 -60 amp 480/600V 3-phase receptacles with GFCI breakers
Power Distribution Panels
©2010 Airgas, Inc. 9600010 - JAN 13