Date post: | 21-Jan-2015 |
Category: |
Education |
Upload: | bhavanavedantam |
View: | 2,013 times |
Download: | 6 times |
SOURCES, PREPARATION, CHARACTERIZATION AND STORAGE OF REFERENCE
STANDARDSPresented By,
Bhavana Vedantam,
I/II M.Pharmacy,
Dept. Of Pharmaceutical Analysis.
CONTENTSIntroduction
Sources
Uses
Preparation
Characterization
COA, Handling, Maintenance, Records
StorageDept. Of Pharmaceutical Analysis 2
INTRODUCTION
Reference Standards (RSs) are the chemical substances or drug substances with high
purity.
These are not intended to use as drugs.
Reference Standards (RS) plays vital role in all phases of Drug Development process.
RS serves as basis for evaluation of both Process and Product performance &
serves as bench marks for drug Safety.
Dept. Of Pharmaceutical Analysis 3
Sources of Reference MaterialsPrimary Sources
United States Pharmacopeia(USP)
European Pharmacopoeia (EP)
Japanese Pharmacopoeia (JP)
Swiss Pharmacopoeia (SP)
French Pharmacopoeia (FP)
Mexican Pharmacopoeia (MP)
In India,
National Institute for Standards and Testing (NIST),
Central Drug Laboratory, Calcutta.
Secondary Sources
Custom Manufactures
Contract Manufacturers
Chemical Suppliers
Dept. Of Pharmaceutical Analysis 4
Contd…
RSs are generally obtained and prepared from United States of Pharmacopeia-National
Formulary (USP-NF)
USP RSs collection consists of more than 3,000 items ranging from drug substances,
related impurities, residual solvents, biologics, excipients, botanicals, polymers and
melting point standards.
In India, Central Drug Laboratory is responsible for making available IP RSs.
NIST provide a wide variety of standard reference materials (SRMs) for validating and
calibrating analytical methods
Dept. Of Pharmaceutical Analysis 5
USP Reference Standards are highly-characterized physical specimens used to ensure the identity, strength, quality, and
purity of medicines (drugs, biologics, and excipients), dietary supplements, and food ingredients.
Other organizations also involved in establishment of
RSs, like Japanese & European pharmacopeias,
WHO, Reference Materials Committee of ISO (REMCO),
etc.
Definition As per USP-NF
Dept. Of Pharmaceutical Analysis6
Other Definitions:
Dept. Of Pharmaceutical Analysis 7
FDA: Specifically prepared drug substance batch and an authentic material of the highest purity used for structural elucidation and benchmark for working standards
ICH (Q6A): A reference standard from new drug substances intended for assays, its impurities should be adequately identified and/or controlled and purity should be measured by a quantitative procedure
Dept. Of Pharmaceutical Analysis8
• Reference standards are used to support measurements concerned with chemical composition, biological, clinical, physical and miscellaneous areas.
• Substances characterized for chemical purity and/or trace impurities.
• Standard solutions and gas mixtures, often prepared gravimetrically from pure substances and used for calibration of gases.
• Physico-chemical reference materials characterized for properties such as melting point, viscosity.
• Reference objects or artefacts characterized for functional properties such as taste, odour, octane number, and hardness.
Uses of Reference Standards (RSs)
Qualitative analysis of materials by comparison of RS & chemical substance in aspects • IR- Functional Group Conformation• Melting point & HPLC- Purity identification• U.V.- identification, etc,
Quantitative analysis • HPLC• Limit tests
Specific Uses• Method validation• Calibration of Instruments
Dept. Of Pharmaceutical Analysis 9
Contd…
Qualitative &
Includes following aspects,
1) Identification
2) Purity analysis
3) Assay of sample.
Results are compared with RS & sample should meet standards of RS.
These can be performed by using spectroscopic & chromatographic methods.
Quantitative Analysis
Dept. Of Pharmaceutical Analysis 10
Dept. Of Pharmaceutical Analysis 11
Calibration Of Instruments
When an instrument is giving irrelevant results then it can be calibrated by using RSs. If results are close to acceptance criteria then referred as instrument is working properly.
Some examples are given below,
Instrument RS Used for Calibration
UV-Vis Spectrophotometer Potassium dichromate
IR Spectrophotometer Poly Styrene film
Karl Fischer Titrimeter Di Sodium Tartrate
Flame Photometer Potassium dichromate
Gas Chromatography 1.0% v/v Toluene solution in n-Hexane
Method validation & Uncertainty of Method
Generally in a method validation estimation of Bias is most critical aspect .
RSs will have limited values of Uncertainty.
Uncertainty associated with RS should be NMT 1/3rd of sample measurement.
Dept. Of Pharmaceutical Analysis 12
Classification
Analytical Reference Standards (ARS)/ Primary
Standard
Authentic Materials (AM)
Working / Secondary Standard (WS)
Dept. Of Pharmaceutical Analysis 13
Analytical Reference Standards (ARS)
Definition: A material or substance with well established properties, used for the
calibration of apparatus the assessment of a measurement method or for assigning values to materials.
USES: Mainly for Research & Drug development purpose To characterize WS
Dept. Of Pharmaceutical Analysis 14
Working Standard (WS)
Definition:
A drug substance of established quality and purity as shown by comparison to the reference standards material and used as reference working substance for routine quality control.
USES: Mainly for Laboratory purpose.
Dept. Of Pharmaceutical Analysis 15
Comparison Among ARS, WS & AMCATEGORY ARS WS AM
Synonym Primary (1˚) / Gold standard Secondary(2˚) standard Authentic Visual Reference
Purity NLT 99.5% NLT 95% NLT 80%
Quality Highly Characterized Not so as ARS Not so as WS
Characterization Acceptable without comparison Requires comparison with 1˚ standard
Purpose For industrial purpose in Drug development process R&D Calibration of apparatus,
methods and materials Calibration of 2˚ standard
For Laboratory purpose & in QC
As visual images to compare certain test articles to meet requirements
Not Used As drug or cosmetic for consumption
For research purpose Not for chemical analysis
Availability Synthesized independently & available in very less quantity.
Procures from Bulk manufacturer or prepared in laboratory itself
Available in small quantity
Cost Very expensive Low cost Low cost
Dept. Of Pharmaceutical Analysis16
Dept. Of Pharmaceutical Analysis 17
Types of Reference Standards:
Reference Solution Compounds which are difficult to handle like very hygroscopic or moisture sensitive, a
stable solution of drug substance can be
manufactured and filled into tight glass ampule
for once use only with a detail of storage
condition and shelf life
Related Substance include the related
impurity, By-products, degradation products and used to prove the
system suitability, qualitative or
quantitative analysis
System Suitability is a mixture of the
compound with a small amount of the impurity is required; mixtures of impurities or a mixture of impurities and the
compound as reference standard. SST test based on the unadjusted RRT, RT and the resolution.
Classification According To ISO & USP
Certified Reference Material (CRM)
• A reference material whose property values are certified by a technically valid procedure accompanied by or traceable to a certificate or other documentation which is issued by a certifying body.
Reference Material (RM)
• It is a Working level Reference Material used for the calibration of an apparatus, the assessment of a measurement method, or for assigning values to materials.
Dept. Of Pharmaceutical Analysis 18
ARS Preparation:
Synthesized independently by the Industry for their use.
Preparation of ARS from WS:
INCASE OF:
Analytical laboratories facing difficulty to procure ARS from Official sources
For daily analysis
CONDITIONS:
Prepared ARS from WS should meet properties of RS.
Preparation Of
Reference Standards
Dept. Of Pharmaceutical Analysis 19
Bulk material procured from manufacturer will be
characterized & purified (i.e., WS)
From above 5-50 grams collected and stored in large
glass ampoules
Analytical tests will be done according to
pharmacopoeial requirements
Standardize the content by 3 analysts, if results are
close
Transfer Standardized WS into amber colored
ampoules of capacity 50-100 mg and store properly
Contd..
Dept. Of Pharmaceutical Analysis 20
WS Preparation
Bulk material should satisfy following tests
• Evidence of chemical structure• Assay• Purity• Accelerated stability testing, etc.
Then material can referred as Working standard
Dept. Of Pharmaceutical Analysis 21
Characterization Of Reference Standards
Qualification of RSs is a critical parameter in which a thorough characterization is necessary in aspects of
1) Identity2) Strength3) Quality4) Purity
Dept. Of Pharmaceutical Analysis 22
Dept. Of Pharmaceutical Analysis 23
Should understand Physico chemical Profile of RS
ARS should have good chemical stability on wide range of storage
Requirements for characterization should be cross-checked to avoid Analytical errors.
The validity (i.e., accuracy, precision, sensitivity, specificity) of the analytical methods used for purity determination should be demonstrated
Highly pure (i.e., ≥99.5%)
In total the degradation and by-products should not be more then 0.5%
The levels of all impurities found (including those not chemically identified, isolated, and characterized) should be provided as a summary tabulation
Content of enantiomer in case of chiral compound is not taken into account as by- products and degradation products by normalized area percent
Basic Requirements For Qualification
Phys
ical
Des
crip
tion • Visual inspection
• Optical microscopy
Proo
f of s
truc
ture • Elemental analysis
• U.V. spectroscopy
• I.R. Spectroscopy
• Mass Spectroscopy
• NMR Spectroscopy
• Raman Spectroscopy
• X-Ray Diffraction
Steps Involved In Characterization
Dept. Of Pharmaceutical Analysis 24
• Loss On Drying (LOD)
• Karl Fisher Titration
• Thermo Gravimetric Analysis (TGA)
• Differential Scanning Calorimetry (DSC)
• Residue On Ignition (ROI)
• Thin Layer Chromatography (TLC)
• High Performance Liquid Chromatography (HPLC)
• Gas Chromatography (GC)
Purity
• Titration
• Phase - Solubility Analysis
Assay
Contd…
Dept. Of Pharmaceutical Analysis 25
Dept. Of Pharmaceutical Analysis 26
Elemental analysis by ICP (inductively-coupled plasma) detects up to 24 metals, measuring less than 5μ in size
NMR spectroscopyIR spectroscopy
Mass spectroscopy
Proof Of Structure:
Purity DeterminationDetermines free content & water of hydration trapped into the crystal
Karl Fischer Titration
• Caution must be taken while doing KF Titration. No external moisture should interrupt.
Determines amount of volatile matter LOD
• The % of material lost on drying should correlate to the total amount of solvent and moisture obtained by other measurements, when determining mass balance accountability for reference standard material
Measures the change in the mass of sample as the temperature is changedTGA
• Gives information regarding moisture and solvent levels, an indication if the material is a hydrate or solvate, and the rate of reaction
Measures the difference in energy (heat flow) between reference and sample.DSC
• Used to accurately measure the melting point and purity of the reference material.
Dept. Of Pharmaceutical Analysis 27
Contd…
ROI• Gives information on presence of inorganic impurities• Method involves charring, digestion and ignition of RS• ROI can be coupled with spectroscopic methods for identification &
quantification of inorganic impurities.
TLC • TLC coupled with Densitometer will measure relative amounts of separated components & impurities
GC • Determines presence of Organic Solvents as impurities
HPLC • Impurities, relative substances detection
Dept. Of Pharmaceutical Analysis28
Assay Of RS
Titration
• Titration values determines counter-ions & impurities present in RS.• Less selectivity compared to Chromatographic techniques
Phase - Solubility Analysis
• Absolute method that provides a totally independent assessment of purity and identity of impurities.• Phase-solubility analysis is applicable to all species of compounds that are crystalline solids and that
form stable solutions.
Dept. Of Pharmaceutical Analysis 29
Dept. Of Pharmaceutical Analysis 30
Working Factor And Drug Content CalculationContents for Reference standard can be calculated as follow-
100- (%Loss on drying + %Total related substance + % Residue on ignition*)
or
100- %Water + %Residual solvent +% Total related substance + % Residue on ignition*)
(100- Volatile correction#+ % Total related substance + % Residues on ignition*)/ 100
Working factor for Reference standard can be calculated as follow-
Working factor and content are correlated by a factor of 100, e.g. Drug content= 100xWF. If WF is 0.994 then content= 99.4%. But working factor should not be used in the documentation part of Reference Standard.
*This is project specific correction and depends again on the information available in the specification#Depends on the product specification, require to consider WC or residual solvents or LOD
If Value of WC+Residual solvents or LOD or DP and By products is <0.1% , can be disregarded
Dept. Of Pharmaceutical Analysis 31
Stability, Expiry & Retest Expiration and Retest Date:
• For any new chemical entity an initial expiry or retest date decided as 6 months if stock material stored at -20 C⁰
• Availability of stability data for 3 months at 40 C/75%RH demonstrates the retest ⁰period of 24 months if stored at -20 C⁰
• Expiry date is periodically extended on the basis of retest performed and stability proved
• Reference standard may have a maximum 5 years expiry period
Dept. Of Pharmaceutical Analysis 32
Prerequisite for analytical
• Essential for bulk drug testing, should be safeguarded by proper storage
• No purification required if purity >99.0% for RS and for Impurities >95.0%
• Supplied with a CoA including complete identification testing
• Stability data indicates the storage conditions
• Information of its hygroscopicity and solid-state properties, e.g. amorphous,
crystalline, polymorphic form etc..
• A material safety data sheet
• A list of potential impurities (if an active substance) with response factors
Dept. Of Pharmaceutical Analysis 33
• Name and unique batch number
• Manufacturer
• Manufacturing date
• Retest date
• Expiry date
• Transport instructions
• Storage condition
• Content of reference substance
• Note on calculation of the contents
• Special remark on handling requirement if any
• All the required tests with their specifications and results
Information needed for COA:
Certificate Of Analysis
Dept. Of Pharmaceutical Analysis 34
Use and maintenance:
• Must be equilibrated to room temperature for 30 minutes before use
• Protect from light and very tight packaging
• For NCEs packaging recommended in amber color bottle with tight sealed cap
• Moisture sensitive and hygroscopic reference substance are packed into once use packaging material only and discarded after the use if any remaining quantity available
Usage and MaintenanceHandling during analysis:
..HANDLING
Dept. Of Pharmaceutical Analysis 35
• Hands should be thoroughly washed before handling.
• Transfer should be done with clean stainless steel spatula. The spatula used should
be cleaned after use.
• While weighing clean spatula has to be used.
• Containers should be immediately closed as soon as the sample is taken out.
• Containers has to be labelled.
STORAGEQualified Reference standard should be stored in Sealed Ampoules of Single or multiple dose at proper storage conditions.
Should be protected fromLightMoistureHeat
Type of Container Used for
Moisture resistant Hygroscopic Drugs
Amber colored Light Sensitive Drugs
Heat proof Thermo Labile Drugs
Dept. Of Pharmaceutical Analysis 36
Dept. Of Pharmaceutical Analysis 37
• Only authorized personnel of the laboratory should have an access to reference standards.
• Codes should be given to reference standards for easy identification and handling.
• A log book should be maintained in order to keep the record of the reference drugs used.
• The personnel handling reference standards should take utmost care while maintaining
these records.
• The log book should have compulsorily have the details like date, name of standard taken,
purpose
for which it is issued, amount issued, amount remaining, signature.
Records
Conclusion
Dept. Of Pharmaceutical Analysis 38
Conclusion
RS is an Important Analytical Tool in industry & in QC labs. Result of any analytical procedure or any instrument and drug safety depends on RS.
References
Hand Book Of Isolation And Characterization Of Impurities In Pharmaceuticals, By
Satinder Ahuja, Elsevier Publications, Volume 5, Pg No: 15, 119-143.
http://www.usp.org/reference-standards
http://www.ipapharma.org/events/IPA%20-%20EDQM%20pdf/Antony%20Gomes%20-%20reference%20sta
ndards.pdf
http://www.discoverysciences.com/uploadedFiles/Library/Technical_Literature/Brochures/B505A_Drug_Cat
alog_LR_04_17_09.pdf
http://www.fda.gov/downloads/Drugs/Guidances/ucm122858.pdf
Dept. Of Pharmaceutical Analysis39
Dept. Of Pharmaceutical Analysis 40