All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
Manufactured and tested to UL#2108/8750 and CSA standards. Note: Suitable for damp location.Fixtures are not designed for direct contact with insulation.
Fixture: Type:
Project:
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]
APPLICATIONLow voltage LED lighting fixtures using remote driver platforms are ideally suited to applications that require easy access to LED drivers for routine maintenance and improved LED life and reliability. Remote driver platforms are especially useful in hard to access ceilings and where historical or important architectural features cannot be disturbed after lighting fixtures are installed.
PRODUCT DATA
REFLECTOR: Upper reflector provides variety of beam distributions. Lower reflector is soft specular Alzak and features a 5/8" polished overlap flange which is standard. Regressed lenses are available options. HOUSING: Heavy gauge galvanized steel housing protects the optical assembly. Standard plaster flange allows one inch ceiling thickness with custom depth available. LED module is accessible from below. ELECTRICAL: Fixture designed to be used with remote low voltage power distribution sys-tems. Includes a quick connect power connector and thermal protection module. See table for wattages and delivered lumens at various drive currents.MOUNTING: Universal mounting brackets adjust vertically and accept L-Bar interlocking, expandable c-channel hanger bars which are supplied standard. L-bars are suitable for T-bar, wood joist and metal joist ceiling styles. Additional features on last page.LED MODULE & DRIVER: Bridgelux Vero 29 COB offers superior efficiency, stable consis-tant color and good color rendering CRI = 80 • Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient tempera-tures do not exceed 45°C. Lower ambient temperatures yield longer lamp life.
SERIES 4VLMTBV9 Low Voltage LED Downlight
with Remote Driver/Power Supply 1492-3027 Lumens
LMT1.1UUCNUL
5 Year Warranty
Catalog #:
4VLMTBV9 4PLED
Trim Trim Finish w/polished flange
4PLED – Open Downlight Reflector L3 – C73 Prismatic Glass Lens L5 – Frosted Glass Lens L6 – Frosted Acrylic Lens Option L7 – Solite Micro-Prismatic Glass Lens L8 – Clear Poly Carbonate Lens Option L9 – Clear Tempered Glass Lens Option
SCLPF – Soft Specular Clear AlzakHAZPF – Haze Alzak
For white painted flange, drop “PF” from Catalog #. For other finishes, consult reflector section.
Example: 4PLEDHAZPFExample: 4VLMTBV940KN
CALIBERLIGHTINGLE
D
®
Fixture Series Color Temperature Beam Distribution
4VLMTBV9(1492- 3027 delivered
lumens)
40K = 4000K35K = 3500K30K = 3000K27K = 2700K
N = 32°
W = 41°
4.47"
8.00"12.06"
6.54"
5.75"
Rough Opening 5.13"
BENEFITS OF REMOTE DRIVER PLATFORMS
• Centralized power (driver) located in an accessible loca-tion for easy maintenance.
• Improved thermal management in lighting fixtures yields dramatically increased LED life and reliability.
• Remote driver with low voltage distribution – up to 200 feet.
• Low voltage class 2 wiring between driver panel and lighting fixtures. No conduit required.
• Up to 12 independent driver channels.• Proprietary dimming algorithm is compatible with video
cameras.• 87% power efficiency across a wide range of LED lighting
products.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]
MODEL NUMEBER TRIM NUMBER DRIVE CURRENT BEAM DIST DELIVERED LUMENS WATTAGE LPW
4VLMTBV935KN 4PLEDSCLPF 350mA N (32°) 1582 12.4 127.6
4VLMTBV935KW 4PLEDSCLPF 350mA W (41°) 1578 12.4 127.3
4VLMTBV935KN 4PLEDSCLPF 500mA N (32°) 2176 17.5 124.3
4VLMTBV935KW 4PLEDSCLPF 500mA W (41°) 2166 17.5 123.8
4VLMTBV935KN 4PLEDSCLPF 700mA N (32°) 3027 26.9 112.5
4VLMTBV935KW 4PLEDSCLPF 700mA W (41°) 3026 26.9 112.5
Wattage and Delivered Lumens Data at Specific Drive Currents
Remote Driver/Power Supply Table
MODEL NUMNER CONTROL INPUT DRIVE CURRENT CHANNELS ZONES MAX. FIXTURES SUPPORTED
LMT-12-0350-ANA ANALOG 0-10 350mA 12 4 12
LMT-09-0500-ANA ANALOG 0-10 500mA 9 3 9
LMT-06-0700-ANA ANALOG 0-10 700mA 6 3 6
LMT-12-0350-DMX DMX 350mA 12 N.A. 12
LMT-09-0500-DMX DMX 500mA 9 N.A. 9
LMT-06-0700-DMX DMX 700mA 6 N.A. 6
LMT1.1UCCLUL
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]
AC Disconnect
AC Mains
WiFi Device
Ligh
ting
Cont
rol S
yste
m
KeypadOccupancy Sensor
Photo Cell
Low-VoltageShielded 18/2 AWG Multi-Conductor (Honeywell #1214 or Equivalent.)
Wired Touchpad
Rem
ote
Driv
er/P
ower
Sup
ply
12 C
hann
el -
700m
A - D
MX
0-10
V
115 - 277 Vac
Control Device Cable (System Specific)
Line Voltage
Cat5 DMX/0-10V Control
LEGEND:
Typical Layout for Low Voltage LED Lighting Fixtures with Remote Driver Platform
LMT1.1CAMUUL
LMT1.1UUCNUL
Available Reflector Finishes
Standard Hanger Bars
ClearSoft Specular “SCL”
PewterDiffused “EPW”
Soft Specular “SPW”
HazeDiffused “HAZ”
StrawDiffused “EST”
Soft Specular “SST”
BronzeDiffused “EBZ”
Soft Specular “SBZ”
WheatDiffused “EWT”
Soft Specular “SWT”
OPTIONS & ACCESSORIES
Our standard reflector finish is soft specular clear Alzak (SCL) with a polished self-flange (PF). Additional hues are noted to left. Several of these are offered in both a soft specular and a diffused/matte finish. For colors not shown, contact our sales department for advice on custom anodized finishes.
Specified suffix of desired finish.Example: 4VLEDSCLPFFor white painted flange omit PF.
Interlocking L-Bar hanger bars are now standard with all recessed Coventry Architectural lighting fixtures. Installer friendly features include:• L-Bars are fabricated from identical L-shaped cross sec-
tions that form a sturdy ½” by 1-1/2” C-channel profile for superior rigidity.
• Pre-marked with spacing locations for 24” T-bar; 16” and 24” joist ceilings (wood and metal).
• Extension locks with an easy-to-use integral twist tab. No separate fastener.
• Interlocking and expandable to 24”. Can be increased to 36” or 48” with the use of one additional bars.
• Allows for offset mounting.• Integral and barbed nail spike for wood joist ceilings.• Fits into the c-channel notches on our butterfly
mounting bracket.• Complete details including video demonstration is avail-
able at www.pathwaylighting.com.
To increase the included L-Bar set to a 36” length, order two model #015-954 and use one per side. To increase to a 48” length, order one #LBAR which is a complete set of four bars and use two per side.