+ All Categories
Home > Documents > register Now ACHIEVE YOUR OWN N4, N5 & N6 CertifiCates · 2016-11-28 · To apply to study for the...

register Now ACHIEVE YOUR OWN N4, N5 & N6 CertifiCates · 2016-11-28 · To apply to study for the...

Date post: 30-May-2020
Category:
Upload: others
View: 34 times
Download: 0 times
Share this document with a friend
14
WHAT YOU WILL GAIN: • LIVE online flexible learning • Personalised tuition • Attend anywhere – You only need Internet • Highly interactive video and web conferencing – LIVE sessions online • Industry experienced lecturers • Practical job-focussed courses • Valuable National Certificates leading to your National Technical Diploma in one of the following disciplines: – Electrical Engineering – Electronics Engineering – Industrial Instrumentation Engineering – Mechanical Engineering • IDC is accredited to offer the qualifications N4, N5 and N6** For more information or to apply, please contact [email protected] or call us on 011 024 5520/1/2/3/4/5 or visit www.idc-online.ac.za Gain cutting edge expertise with a prestigious, practical NATIoNAL TECHNICAL DIPLoMA ACHIEVE YOUR OWN N4, N5 & N6 CERTIFICATES leading to National N Diploma (Engineering)* Accreditation number QCTo NATED/15/0127 Electrical Engineering Electronics Engineering Industrial Instrumentation Engineering Mechanical Engineering Technology Training that Works REGISTER NOW V0006 * After completion of your N6 certificate, followed by relevant and appropriate work experience for 24 months you can apply for your National N Diploma. ** The Quality Council for Trades and occupations (QCTo) has accredited IDC Technologies (Pty) Ltd. START DATES* N4 N5 N6 2017 TRIMESTER 1 16 January 16 January 16 January TRIMESTER 2 8 May 8 May 8 May TRIMESTER 3 11 September 11 September 11 September 2018 TRIMESTER 1 15 January 15 January 15 January TRIMESTER 2 14 May 14 May 14 May TRIMESTER 3 10 September 10 September 10 September STUDY oNLINE AT YoUR HoME/oFFICE oR CLASSRooM-BASED See Schedule below for Start Dates. Classroom-based coming in 2017. *IDC Technologies reserves the right to cancel or postpone courses if required student enrolment numbers are not achieved. Spread the fees – Payment options available
Transcript

WHAT YOU WILL GAIN:• LIVEonlineflexiblelearning• Personalisedtuition• Attendanywhere–YouonlyneedInternet• Highlyinteractivevideoandwebconferencing–LIVEsessionsonline• Industryexperiencedlecturers• Practicaljob-focussedcourses• ValuableNationalCertificatesleadingtoyourNationalTechnicalDiplomain

oneofthefollowingdisciplines: – ElectricalEngineering –ElectronicsEngineering – IndustrialInstrumentationEngineering –MechanicalEngineering

• IDCisaccreditedtoofferthequalificationsN4,N5andN6**

Formoreinformationortoapply,pleasecontact [email protected] 024 5520/1/2/3/4/5

orvisitwww.idc-online.ac.za

Gaincuttingedgeexpertisewithaprestigious,practical

NATIoNALTECHNICALDIPLoMA

ACHIEVE YOUR OWN

N4, N5 & N6 CertifiCates leading to National N Diploma (Engineering)*AccreditationnumberQCToNATED/15/0127

• Electrical Engineering • Electronics Engineering • Industrial Instrumentation Engineering • Mechanical Engineering

Technology Training that Works

register Now

V0006

* AftercompletionofyourN6certificate,followedbyrelevantandappropriateworkexperiencefor 24monthsyoucanapplyforyourNationalNDiploma.

** TheQualityCouncilforTradesandoccupations(QCTo)hasaccreditedIDCTechnologies(Pty)Ltd.

STARTDATES* N4 N5 N6

2017 TRIMESTER1 16January 16January 16January

TRIMESTER2 8May 8May 8May

TRIMESTER3 11September 11September 11September

2018 TRIMESTER1 15January 15January 15January

TRIMESTER2 14May 14May 14May

TRIMESTER3 10September 10September 10September

STUDYoNLINEATYoURHoME/oFFICEoRCLASSRooM-BASED SeeSchedulebelowforStartDates.Classroom-basedcomingin2017.

*IDC Technologies reserves the right to cancel or postpone courses if required student enrolment numbers are not achieved.

Spreadthefees –Paymentoptionsavailable

2V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

You will participate in practicalexercises using a combination ofremote laboratories and simulationsoftware, to ensure you get therequisitehands-onexperience.Thiswillgiveyouasolidpracticalexposuretothekeyprinciplescoveredintheprogrammeandensureyouareabletoputtheoryintopractice.

PracticalExercises,RemoteLabsandAssignments

PresentationFormatTheprogrammefeaturesreal-worldapplicationsandusesablendedapproachinvolvinginteractiveonlinewebinars, simulation software and self-study assignments with a mentor on call. Each N4, N5, N6programme will be delivered part time over 6 months. Presentations and group discussions will beconducted using a live, interactive software system. For each topic you will have an initial readingassignment(whichwillbedeliveredtoyouinelectronicformatinadvanceoftheonlinepresentations).

Therewillbecourseworkorproblemstobesubmittedandinsomecasestherewillbepracticalexercises,usingsimulationsoftwareandremotelabsthatyoucaneasilydofromyourhomeoroffice.Youwillhaveon-goingsupportfromthelecturersviaphone,faxandemail.

TimeCommitmentforEachCertificateYou have numerous options with IDC Technologies.

1.Already passed some subjects?If you’ve already passed some subjects at Level 4, 5, or 6, you can study the remaining subjects as they are offered in our timetable. Just enrol for the subjects you need to complete the level. Contact us to find out when the specific subjects that you need are being offered.

2.Starting from the beginning?Each N level will take either 3 months (one trimester) or 6 months - your choice. This means that studying all 3 N levels (N4, N5 and N6) will take you a total of 9 months (“full time”) or 18 months (“part time”).Within each level a minimum of 4 subjects are required. Each subject requires 30 hours' attendance over a 10-week trimester (this attendance can be via live online lectures, tutorials and workshops). A minimum of 15 hours per subject per trimester is recommended for self-study.

“Part-time”This option is ideal for those already working in industry, such as artisans and other mature-age students. We will offer you two subjects per 10-week trimester, therefore it will take 2 trimesters to complete each N Level. Each subject requires 2 x 1.5 hour sessions (live online lectures, tutorials, workshops) each week, therefore two subjects means 4 x 1.5 hour sessions – 6 hours of sessions each week plus your own private study of 1.5 hours per subject per week.

“Full Time”Full time study can mean that you’ll complete all 3 N Levels in just 3 trimesters. Your workload is double that of “part-time” students: four subjects per 10-week trimester, requiring a total of 12 hours of sessions each week, plus 1.5 hours private study per subject per week.

You will be required to attend at least 80% of the sessions. This is possible from any location provided you have an internet connection. All sessions are recorded and can be reviewed later at your convenience.

IDC will support you and will monitor your progress. You will need to achieve a minimum of 40% per subject (tests and assignments) to be able to write the National Examination.

Live WebinarsDuring the programme you will participate in live interactive sessions/webinars with the lecturers and other participants. Recordings of the live sessions are also made available for students.

DedicatedCoordinatortoHandleyourQueriesWeknowthatstudyingisatoughbusiness.onallour programmes we provide a dedicatedcoordinatorwhowillhelpyouthroughthehasslesand stresses of study and promptly answer allyourqueries.Youwillalsohavequickaccesstoalecturerwhocanhandleanyday-to-dayproblems.

WhoShouldCompletethisProgrammeTheNationalNDiplomapathway isdesignedtoenhancethecareersof technicaloperators,artisans,trade-persons,techniciansandmore.Animportantoutcomeofthisprogrammeistoprovideyouwithcoreengineeringskillssothatyoucangraspopportunitiestoenhanceyourcareerandtobenefityouremployer.Intheengineeringteamthetechnicianmayhavetoactasasupervisorinordertointerpretandpassontheinstructionsreceivedfromseniorpersonnel.

Successful graduates with the National N Diploma should be able to find employment in the sectorsbelow:

• Energy(forexample:Eskom,Mines)

• Transport(e.g.:PRASA)

• Telecommunications(e.g.:Telkom,MTN,Vodacom)

• Municipalities

• ChemicalIndustries(e.g.:Sasol)

• MotorManufacturing/AutomotiveIndustry

• Aeronautical/AerospaceIndustry

BenefitsofLiveeLearning• Attendlessonsinalive,virtualclassroomwithyourlecturersandfellowstudents• Upgradeyourskillsandrefreshyourknowledgewithouthavingtotakevaluabletimeawayfromwork• Receiveinformationandmaterialsinsmall,easytodigestsections• Learnfromalmostanywhere-allyouneedisanInternetconnection• Haveconstantsupportfromyourprogrammelecturersandcoordinatorforthedurationofthe

programme• Interactandnetworkwithparticipantstogainvaluableinsightintobusinesspractices• Learnfromindustryexperts• Liveinteractivewebinars,notjusta‘bookontheweb’• Revisitrecordingsofwebinarswheneverandasoftenasyouwish

Visitourwebsite: www.idc-online.ac.za

orcalluson 0110245520/1/2/3/4/5

3V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

WeareFlexibleWithYourCommitmentsWe recognise that personal circumstances canmake it difficult to complete the programme inthetimeavailable.Wewillbeflexibleaboutthetime you require to complete the programme.You can “pause and restart” by joining asubsequentintake(are-joiningfeemayapply).ANationalCertificateorresultslipwillbeissuedfor each complete programme or subjectsuccessfullycompleted.

HardwareandSoftwareRequirementsAll you need in order to join the webinars onceaccepted in the programme is an adequateInternetconnection,acomputer,speakersand, ifpossible,amicrophone.Thesoftwarepackageandsetupdetailswillbesenttoyoupriortothestartoftheprogramme.

EntranceRequirementsToapplyfortheN4Certificate,studentsneedtobeinpossessionofaSeniorCertificatewithMathsandScienceoraN3CertificatewithMathsandScience.

Alternativecriteriaforentryinclude:

• N5–RelevantN4Course

• N6–RelevantN5Course

ToapplytostudyfortheN4Certificate,you’llneedyourSeniorCertificate(Matric/Grade12),withMaths and Science, each at a passrate of 40% or higher, oR your N3 Certificate with Maths andScience.

To apply to study the N5 or N6 Certificates, you’ll need to have the N certificate at the prior level (N4 for N5, N5 for N6). on successful completion of all 3 certificates you will have developed a goodbackgroundinengineeringfundamentals.Thenyoucanuseon-the-jobexperienceforatleast2yearsinyourchosenstreamtoearnyourNationalNDiploma(Engineering).

Gaincuttingedgeexpertisewiththisprestigious,practical

NationalTechnicalDiploma

YourpathwaysbeyondtheNationalNDiplomaStudentswhosuccessfullycompletetheNationalNDiplomamaybeeligibletoapplyforenrolmentinfurther study at Engineering Institute of Technology (EIT) towards the Bachelor of Science. TheBachelor’sprogrammeprovidesapathwayrightthoughtoaMasterofEngineeringdegree.Pleaseseediagramabove.EITisasisterorganisationtoIDC.

GraduateswiththeNationalNDiplomawhocompleterequiredadditionalsubjectsandhavegainedtherequisite experience may be eligible to apply for the Government Certificate of Competency. ContactyourIDCadvisorformoredetailaboutthispathway.

GraduateswiththeNationalNDiplomamaychoosetoapplytoECSAforregistrationasanEngineeringTechnician.

Routes to engineeRing CaReeR suCCess

Notes: 1. BSc(IndustrialAutomationEngineering);BSc(ElectricalEngineering);BSc(MechanicalEngineering);BSc(CivilandStructuralEngineering).2. Youcanworkinamultitudeofrolesasatechnologist/engineerwhichisthestatusyouachieveaftera3yeardegree.SometimesreferredtoasIncorporatedEngineer(intheUnitedKingdom).3. oncompletionoftheMasterdegreeyoucanworktowardsProfessionalEngineerstatus(E.g.RegisteredProfessionalEngineerstatusthroughProfessionalsAustralia)oncompletionofpractical

experience.Itisrecommendedthatyouapproachyourlocalprofessionalengineeringbodydirectlyforanindividualassessmentand/orregistration.4. ThisisanEITAdvancedDiploma(IndustrialAutomation,AppliedElectricalEngineering,MechanicalEngineeringTechnology,CivilandStructuralEngineering)orequivalentqualification

fromanotherinstitution.* onlineDelivery:Acombinationofliveonlinesessions,videos,recordingsandonlinelaboratories.** AftercompletionofaNationalDiplomaorAdvancedDiploma,studentscanenrolforfurtherstudytowardstheBachelorofScience(BSc)degree.

TECHNoLoGIST2

/ENGINEERTECHNICIAN

BSc(Engineering)1

(Full-timeOrPart-timeIntensive)(online)

3YEARS(F/T)oR5–6YEARS(P/T)

PRoFESSIoNALENGINEER3

Masterof Engineering

(Part-timeIntensive)(online)

2YEARS(P/T)

NationalNDiploma(Viarelevantwork

experience)

IDCTechnologies

V0002

N4,N5andN6NationalCertificate(Part-time)(online)

EngineeringInstituteofTechnology

BSc(Engineering)1**

(Full-timeoRPart-time)(online)

1-2YEARS(F/T)oR2-4YEARS(P/T)Advanced

Diploma4

(Part-timeIntensive) (online)

18MoNTHS(P/T)

ExIT

2YEARS(F/T)ExIT

9-18MoNTHS(P/T)

1.SCHooL LEAVERYou’vematriculated

withover40%in MathsandScience

OrPassedN3with

MathsandScience

YoURENTRYPATH

2. WoRKEDFULL-TIMEinindustryfor3or

moreyearsinarelevantrole.

(MayneedbridgingcourseinMaths

andScience)

3. SCHooL LEAVERYou’vepassedyourNSCwithDiplomaorDegreeendorsement

DEGREEENDoRSEMENT

DIPLoMAENDoRSEMENT

(FUTURE) Alldurationsshownareapproximate.Tellusaboutyourbackgroundforamorepreciseestimate.

ExIT

4V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

AboutIDCTechnologiesIDC Technologies specialises in engineering training and education in the fields of Instrumentation,Process Control, Industrial Data Communications & Networking, Information Technology, ElectronicEngineering, Electrical Engineering, Mechanical Engineering, Finance and Project Management. IDCTechnologieswasfoundedin1992andhasbuiltastrongreputationgloballyasaproviderofpracticalandtechnicaltraining,deliveredtoover500,000engineersandtechnicians.

ThekeyobjectiveofIDCTechnologiesistoprovideyouwithanoutstandingpracticalengineeringandtechnology education from N4 through to Masters Degrees. The finest engineering lecturers andinstructors,withextensiverealengineeringexperienceinindustry,aredrawnfromaroundtheworldtoofferyouthemostvaluableexperience.

IDC Technologies is a sister company of the well-known and reputable Engineering Institute ofTechnology(EIT).

5REASoNSToSTUDYWITH IDCTECHNoLoGIES1. FLEXIBILITY – The unique optional online

delivery method allows you to ‘earn whileyou learn’. You can study whilst stillremainingcommittedtoworkandfamilylife.It also means that you can participate fromanylocationaslongasyouhaveaninternetconnection, and avoid spending valuabletimeandexpenseontravelusuallyrequiredforattendingacampus.

2. EXPERIENCE – for over 25 years, IDCTechnologies have trained over 500,000engineers and technicians throughout theworld.ourstudentsrangefromindependentcontractors to employees from some of theworld’slargestorganisations.

3. SUPPORT–throughoutyourstudiesyouwillhave access to a dedicated CourseCoordinatorwhoistheretosupportyoufromstarttofinish.

4. PATHWAY–IDCTechnologiesoffersstudentsa complete pathway from the N4 certificatethroughtoaMasterofengineering.

5. LECTURERS WITH REAL-WORLD EXPERIENCE – our lecturers are selected from amongstthe top engineers/lecturers in their field –worldwide. These presenters are highlyskilled at presenting challenging conceptsand ideas to students of varying levels andabilities.

FrequentlyAskedQuestionsFor answers to common questions such as thosebelowgotowww.idc-online.ac.zaandclick“NationalDiploma”.

• IsIDCTechnologiesaccreditedtoruntheseprogrammes?

• WillIreceiveCreditsforthedifferentsubjectsfortheseprogramstostudyfurther?

• WhatiseLearning?

• Whatdolivewebinarsinvolve?

ProgrammeFeesYour programme fees include weekly webinars and tutorials with leading engineering and technicalexperts.The tablebelowshowsthe two feepaymentoptions foreachNcertificate:upfrontorover6monthlyinstalments.A5%feeappliesforthemonthlypaymentoption.

TheDepartmentofEducationfeeforeachexam(onepercertificatelevel)isR500.00.

YouwillalsoneedtobudgetaboutR1000.00forthenecessarytextandreferencebooksforeachlevel.CoSTANDPAYMENToPTIoN

N4–N6LEVEL

CostPerN-Level: R8600.00(4subjects)

CostPerSubject: R2150.00

PaymentoptionsofferedPerN-Level:

Registrationfee Instalmentpermonth(6xmonthlyinstalments) Total

R100.00 R1505.00 R9030.00

ExternalExaminationExternalexaminationsarewritteninMarch–April;July–AugustandNovembereachyearaccordingtotheDepartment of Higher Education and Training, Examination Timetable. These examinations are administratedbytheDepartmentofHigherEducationandTraining.SuccessfulstudentsreceiveaNationalCertificateissuedbytheDepartmentofEducationaftereachcoursecompleted.

IDCstudentscanwriteexaminationsatanyexaminationcentreclosesttotheirresidences.oncestudentsare registered with IDC they inform IDC when they prefer writing the examination and IDC will facilitate theexaminationregistration.

BooksRequiredYouneedtobudgetaboutR1000perN4,N5andN6certificateforbookswhichyouarerequiredtoobtainoverandabovethefeeschargedfortheprogramme.

In addition, IDC Technologies will provide you with a selection of valuable technical manuals from its library at no cost. Please refer to the specific National Certificate streams in this brochure to see therecommendedtitles.

Tofindoutmoreabouttheimmenserangeofengineeringandtechnicalcoursesoffered,

visitwww.idc-online.com andwww.eit.edu.au

CertificationAsyousuccessfullycompleteeachlevel(4,5,6)youwillreceiveaNationalNCertificateforyourchosenstream.AftercompletionofyourN6certificate,followedbyrelevantandappropriateworkexperience for24months,youcanapplyforyourNationalNDiplomainonestream:

• ElectricalEngineering

• MechanicalEngineering

• ElectronicsEngineering

• IndustrialInstrumentationEngineering

5V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

EngineeringProgrammestobeofferedatIDCasperReport191ofDoHE

Engineering:

ELECTRICALEngineering:

ELECTRoNICSEngineering:

INDUSTRIALINSTRUMENTATIoN

Engineering:

MECHANICAL

N4 1.Electro-Technics

2.IndustrialElectronics

3.EngineeringScience

4.Mathematics

1.Mathematics

2.IndustrialElectronics

3.DigitalElectronics

4.CommunicationElectronics

5.IndustrialInstruments

1.IndustrialElectronics

2.DigitalElectronics

3.IndustrialInstrumentation

4.EngineeringScience

5.Mathematics

1.MechanicalDrafting

2.SupervisoryManagement

3.Mechano-Technics

4.EngineeringScience

5.Mathematics

N5 1.Electro-Technics

2.IndustrialElectronics

3.EngineeringPhysics

4.Mathematics

5.PowerMachines

1.Mathematics

2.IndustrialElectronics

3.DigitalElectronics

4.CommunicationElectronics

5.IndustrialInstruments

1.IndustrialElectronics

2.DigitalElectronics

3.IndustrialInstrumentation

4.Mathematics

1.MechanicalDrawingandDesign

2.StrengthofMaterialsandStructures

3.Mechano-Technics

4.Mathematics

5.PowerMachines

6.FluidMechanics

N6 1.Electro-Technics

2.IndustrialElectronics

3.EngineeringPhysics

4.Mathematics

5.ControlSystems

6.PowerMachines

1.Mathematics

2.IndustrialElectronics

3.DigitalElectronics

4.CommunicationElectronics

5.IndustrialInstruments

6.ControlSystems

1.IndustrialElectronics

2.DigitalElectronics

3.IndustrialInstrumentation

4.Mathematics

1.MechanicalDrawingandDesign

2.StrengthofMaterialsandStructures

3.Mechano-Technics

4.Mathematics

5.PowerMachines

6.FluidMechanics

CurriculumStructure

Any 4 subjects from each section

Any 4 subjects from each section

Any 4 subjects from each section

ForExternalExaminationcentresanddetails,pleaserefertopage4ofthisbrochure orvisit:www.idc-online.ac.za/engineering-national-technical-diplomas

6V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

NationalCertificate: ELECTRICALENGINEERING

You’llbeindemandwhenyoulearnthefundamentalsofelectricalcomponents,equipmentandsystemsusedinindustryandcommerce.Thesearekeysectionsofthispopularprogram.

Join the next generation of electrical technicians and embrace an intensive yet enjoyable career byembarkingonthiscomprehensiveandpracticalengineeringcareerpathway.Leadingelectricalengineersandacademicspresenttheprogram.

There is a general shortage of electrical engineers and technicians in many parts of the world due toretirement, restructuring and the rapid growth in new industries and technologies. Many companiescommentonhowdifficultitistofindexperiencedelectricalworkers,despiteofferingattractivesalaries.

Theaimofthisprogrammeistoprovideyouwithcoreelectricalengineeringskillstoenhanceyourcareerand to benefit your employer. In the engineering team the electrical technician may have to act as asupervisorinordertointerpretandpassontheinstructionsreceivedfromseniorpersonnel.

CAREERoPPoRTUNITIESAfter completion of the theoretical part of the National Certificate at level 6, the student may beemployedasalearnertechnicianfortheperioddeterminedbytheemployer–aminimumof24months.Aftercompletionofthetrainingperiod,thestudentmaybeappointedasatechnician.

Peopleworkingintheelectricalengineeringfieldsrequirespecialisedtechnicalskillsandknowledgeinordertomeettherequirementsofcontinuallychangingenvironmentofthevariousindustries.Studentswillacquirethetechnicalknowledgeandskillsthatarerequiredinsmallandmediumbusinessesaswellasprovideaccessandmobilityintohigher-levelmorespecialisedoccupations.

QualifyinglearnersatN6shouldbeabletofindemploymentinthesectorsbelow:

• Energy(forexample:Eskom,Mines)

• Transport(e.g.PRASA)

• Telecommunications(e.g.Telkom,MTN,Vodacom)

• Municipalities

• ChemicalIndustries(e.g.Sasol)

• MotorManufacturing/AutomotiveIndustry

• Aeronautical/AerospaceIndustry

Toapplypleasecontact [email protected] 024 5520/1/2/3/4/5

CoMPREHENSIVEeBooKSANDASSoCIATEDDoCUMENTATIoNYouwillreceivefourofourup-to-datetechnicaleBookstoaddtoyourlibrary.Togetherthesetextscontainhundredsofpagesofvaluableknow-howdistilledfromyearsofexperienceinpresentingtheseprogramsthroughouttheworld.

• PracticalPowerSystemProtectionforEngineersandTechnicians

• PracticalTroubleshootingofElectricalEquipmentandControlCircuits

• ElectricalMaintenanceforEngineersandTechnicians

• ElectricalDrawingsandSchematics

7V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

ENGINEERING:ELECTRICAL

N4 N5(Any4ofthesubjectsbelow) N6(Any4ofthesubjectsbelow)

1.Electro-Technics•PrinciplesofElectricity•DCMachines•ACCircuitTheory•Transformers•ACMachines•GenerationandSupplyofACPower•MeasuringInstruments•SwitchgearandProtectiveDevices•SolidStateControl•Rectification•Installation,Care,operation,Maintenance,

SupervisionandInspectionoftheAboveEquipment

2.IndustrialElectronics•AlternatingCurrentTheory•DirectCurrentTheory•Semi-Conductors(Diodes)•PowerSupplies•TransistorandAmplifierDevices•operationalAmplifiers•ElectronicPowerControl•Transducer•TestingEquipment

3.EngineeringScience•Kinematics•AngularMotion•Dynamics•Statics•Hydraulics•Stress,StrainandYoung’sModulus•Heat

4.Mathematics•Equations,ManipulationandWordProblems•Determinants•ComplexNumbers•Trigonometry•SketchGraphs•LimitsAndDifferentation•Integration

1.Electro-Technics•DCMachines•ACCircuitTheory•Transformers•ACMachines•GenerationandSupplyofACPower•Measuring•SwitchgearandProtectiveDevices•StaticControl•Installation,Care,operation,Maintenance,

SupervisionandInspectionofTransformersandProtectiveDevices

2.IndustrialElectronics•AlternatingCurrentTheory•PowerSupply•TransistorAmplifiers•operationalAmplifiers•IntegratedCircuits•Transducers•ElectronicPhaseControl•TestEquipment•oscillators

3.EngineeringPhysics•GeneralPropertiesofMatter•Heat•LightI•LightII;WaveTheory,Interference,

WaveLength•Magnetism•Electricity•Sound

4.Mathematics•LimitsAndContinuity•Differentiation•ApplicationofDifferentiation•IntegrationTechniques•ApplicationoftheDefiniteIntegral•DifferentialEquations

5.PowerMachines•HeatingandExpansionofGases•SteamGeneration•Condensers•CondensersPumps•Combustion•ReciprocatingAirCompressors•Governors•TheGasTurbine

1.Electro-Technics•DCMachines•ACCircuitTheory•Transformers•ACMachines•GenerationandSupplyofAC•MeasuringInstruments•Switchgear&ProtectiveDevices•StaticControl•SpecialCharacteristicsofArc-Furnace

Transformers,SwitchgearandControlSystems,ElectricalandHydraulic

2.IndustrialElectronics•Transients•Transducers•Ultrasonic•x-RaysandRadioActivity•AutomaticInspectionandTesting•Non-DestructiveTesting•ElectronicSafetyDevices•ThyristorPowerSupplies•ElectronicPowerControl•ProgrammableLogicController(PLC)3.EngineeringPhysics•Thermodynamics•Sound•Electricity•Radioactivity4.Mathematics•Differentiation•IntegrationTechniques•PartialFractions•DifferentialEquations•ApplicationsoftheDefiniteIntegral•ApplicationsWhereDifferentiationand

IntegrationTechniquesareCombined5.ControlSystemsA.GeneralTheoryofControlSystems•BlockDiagramAlgebra•TransientResponse•BodeDiagrams•PracticalControlSystems•Root-LocusDiagramsB.PracticalControlSystems•Transducers•ElectronicSystems•ElectricalMachinesandSystems•HydraulicSystems•PneumaticSystems•TestandTestingEquipment6.PowerMachines•Thermodynamics•SteamGeneration•Nozzles•SteamandGasTurbines•InternalCombustionEngines•AirCompressors•Refrigeration

NationalCertificate: ELECTRICALENGINEERING

8V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

NationalCertificate: ELECTRoNICSENGINEERING

Beattheleadingedgeofmodernengineeringwithyourknowledgeofelectronics.You’lllearnhottopicssuch as industrial and digital electronics, industrial instrumentation and communication electronics.Leadingelectronicsengineersandacademicspresenttheprogram.

Join the next generation of electronics technicians and embrace an intensive yet enjoyable career byembarkingonthiscomprehensiveandpracticalengineeringcareerpathway.

Electronicstechniciansoftenworkinspecialistareas,suchasbiomedicalengineering,telecommunications,officeequipmentordomesticappliancemaintenance,industrialinstrumentation,advancedmanufacturing,aeronauticalengineering.

Theaimofthisprogrammeistoprovideyouwithcoreelectricalengineeringskillstoenhanceyourcareerandtobenefityouremployer.

CAREERoPPoRTUNITIESAfter completion of the theoretical part of the National Certificate at level 6, the student may beemployedasalearnertechnicianfortheperioddeterminedbytheemployer–aminimumof24months.Aftercompletionofthetrainingperiod,thestudentmaybeappointedasatechnician.

Peopleworkingintheelectronicsengineeringfieldsrequirespecialisedtechnicalskillsandknowledgeinordertomeettherequirementsofcontinuallychangingenvironmentofthevariousindustrialsectors.Students will acquire the technical knowledge and skills that are required in small and mediumbusinessesaswellasprovideaccessandmobilityintohigher-levelmorespecialisedoccupations.

QualifyinglearnersatN6shouldbeabletofindemploymentinthesectorsbelow:

• RadioandTVTechnician

• Technician:officeEquipment,PhotocopierandFaxmachine

• TelecommunicationsTechnician

• InstrumentationTechnician

• DomesticApplianceTechnician

• CellphoneRepairs

• CarRadioInstallation

• TV&AerialInstallation

CoMPREHENSIVEeBooKSANDASSoCIATEDDoCUMENTATIoNYouwillreceivefourofourup-to-datetechnicaleBookstoaddtoyourlibrary.Togetherthesetextscontainhundredsofpagesofvaluableknow-howdistilledfromyearsofexperienceinpresentingtheseprogramsthroughouttheworld.

• FundamentalsofIndustrialElectronics

• PracticalProcessControl

• DigitalSignalProcessing

• BestPracticeinIndustrialDataCommunications

Toapplypleasecontact [email protected] 024 5520/1/2/3/4/5

9V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

ENGINEERING:ELECTRoNICS

N4(Any4ofthesubjectsbelow) N5(Any4ofthesubjectsbelow) N6(Any4ofthesubjectsbelow)

1.Mathematics•Equations,ManipulationandWord

Problems•Determinants•ComplexNumbers•Trigonometry•SketchGraphs•LimitsandDifferentation•Integration

2.IndustrialElectronics•AlternatingCurrentTheory•DirectCurrentTheory•Semi-Conductors(Diodes)•PowerSupplies•TransistorandAmplifierDevices•operationalAmplifiers•ElectronicPowerControl•Transducer•TestingEquipment

3.DigitalElectronics•NumberSystemsandCodes•LogicCircuitsandSystems•BasicTreatmentofInterfacing

ElementsandApplications

4.CommunicationElectronics•NetworkTheorems•Vectors•FrequencyResponse•Modulation•Demodulation•CommunicationSystems•RadiowavePropagation

5.IndustrialInstruments•PressureandVacuum

Measurements,IncludingElectricalMethods

•LevelMeasurement•FlowMeasurement•TemperatureMeasurement•Telemetering•AutomaticControl

1.Mathematics•LimitsandContinuity•Differentiation•ApplicationofDifferentiation•IntegrationTechniques•ApplicationoftheDefiniteIntegral•DifferentialEquations

2.IndustrialElectronics•AlternatingCurrentTheory•PowerSupply•TransistorAmplifiers•operationalAmplifiers•IntegratedCircuits•Transducers•ElectronicPhaseControl•TestEquipment•oscillators

3.DigitalElectronics•NumberSystemsandCodes•LogicCircuitsandSystems•InterfacingElementsand

Applications

4.CommunicationElectronics•ResonatingCircuits•MutualInductance•FirstorderLagandLeadCoupling

CircuitResponse•Basicsof4TerminalPassive

TransmissionPaths•BasicsofRadioCommunication

A. RadiationofRFbyMeansofanAntenna

B. ModulationC. DemodulationD. BlockDiagrams

5.IndustrialInstruments•Flow•AnalyticalInstruments•Control(Hardware)•TemperatureMeasurement•Telemetering•AutomaticControl

1.Mathematics•Differentiation•IntegrationTechniques•PartialFractions•DifferentialEquations•ApplicationsoftheDefinite

Integral•ApplicationsWhere

DifferentiationandIntegrationTechniquesareCombined

2.IndustrialElectronics•Transients•Transducers•Ultrasonic•x-RaysandRadioActivity•AutomaticInspectionand

Testing•Non-DestructiveTesting•ElectronicSafetyDevices•ThyristorPowerSupplies•ElectronicPowerControl•ProgrammableLogicController

(PLC)

3.DigitalElectronics•NumberSystemsandCodes•LogicCircuitsandSystems•InterfacingElementsand

Applications

4.CommunicationElectronics•AlternartorsandFilters•TransmissionLines•Antennas•Noise•ModulationandDemodulation

5.IndustrialInstruments•EmmisionSpectroscopy•GasAnalysers•Calorimetry•Chromatography•AutomaticControl•CotrolValves•ProcessReaction•InstrumentationofPlant•ExplosionHazardandIntrinsic

Safety

6.ControlSystems

A.GeneralTheoryofControlSystems•BlockDiagramAlgebra•TransientResponse•BodeDiagrams•PracticalControlSystems•Root-LocusDiagrams

B.PracticalControlSystems•Transducers•ElectronicSystems•ElectricalMachinesand

Systems•HydraulicSystems•PneumaticSystems•TestandTestingEquipment

NationalCertificate: ELECTRoNICSENGINEERING

10V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

NationalCertificate: INDUSTRIALINSTRUMENTATIoNENGINEERING

Learnaboutthetoolsandtechniquesthatareusedtomeasure,controlandmonitortoday’sindustrialfacilities. This stream places emphasis on the use of industry related techniques and tools such asProgrammable Logic Controllers (PLCs), classic and modern control strategies and industry-standardsoftwaredevelopmenttools.

Welltrainedinstrumenttechniciansareindemandduetoretirement,restructuringandtherapidgrowthinnewindustriesandtechnologies.Thereisageneralshortageofskilledinstrumentationengineersandtechnicians in several parts of the world. Many companies comment on how difficult it is to findexperiencedinstrumentationworkers,despiteofferingattractivesalaries.

Jointhenextgenerationofinstrumenttechniciansandembraceanintensiveyetenjoyablecareerbyembarkingonthiscomprehensiveandpracticalengineeringcareerpathway.Leadinginstrumentationengineersandacademicspresenttheprogram.

Theaimofthisprogrammeistoprovideyouwithcoreinstrumentationengineeringskillstoenhanceyourcareerandtobenefityouremployer.Aninstrumenttechnicianwillbeinvolvedwiththepracticaldesign,installationandmaintenanceofelectronicdigitalandpneumaticequipment,controlsystems,maintenanceandproblemsolving.Thecalibrationofmeasuringinstrumentsandtheoptimisationofsystemscanalsoberequired.Intheengineeringteamthetechnicianmayhavetoactasasupervisorinordertointerpretandpassontheinstructionsreceivedfromseniorpersonnel.

CAREERoPPoRTUNITIESAftercompletionofthetheoreticalpartoftheNationalCertificateatlevel6,thestudentmaybeemployedasalearnertechnicianfortheperioddeterminedbytheemployer–aminimumof24months.Aftercompletionofthetrainingperiod,thestudentmaybeappointedasatechnician.

Peopleworkingintheinstrumentationengineeringfieldsrequirespecialisedtechnicalskillsandknowledgeinordertomeettherequirementsofcontinuallychangingenvironmentofthevariousindustries.Studentswillacquirethetechnicalknowledgeandskillsthatarerequiredinsmallandmediumbusinessesaswellasprovideaccessandmobilityintohigher-levelmorespecialisedoccupations.

QualifyinglearnersatN6shouldbeabletofindemploymentinthesectorsbelow:

• Mining

• Petrochemical

• Marine

• FoodandBeverage

• ChemicalIndustries

• AutomotiveIndustry

• Aeronautical/AerospaceIndustry

otherfieldsthatcanalsobeenteredarethoseofsalesengineeratanexistingsupplierofinstrumentationequipmentorasanentrepreneur,specialisinginsales,maintenance,installationormanufacturing.

CoMPREHENSIVEeBooKSANDASSoCIATEDDoCUMENTATIoNYouwillreceivefourofourup-to-datetechnicaleBookstoaddtoyourlibrary.Togetherthesetextscontainhundredsofpagesofvaluableknow-howdistilledfromyearsofexperienceinpresentingtheseprogramsthroughouttheworld.

• PracticalInstrumentationforAutomationandProcessControl

• BestPracticeinProcess,ElectricalandInstrumentationDrawingsandDocumentation

• FundamentalsofProcessPlantLayoutandPipingDesign

• PracticalProjectManagementforEngineersandTechnicians

Toapplypleasecontact [email protected]

orcalluson 011 024 5520/1/2/3/4/5

11V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

NationalCertificate: INDUSTRIALINSTRUMENTATIoNENGINEERING

ENGINEERING:INDUSTRIALINSTRUMENTATIoN

N4(Any4ofthesubjectsbelow) N5 N6

1.IndustrialElectronics•AlternatingCurrentTheory•DirectCurrentTheory•Semi-Conductors(Diodes)•PowerSupplies•TransistorandAmplifierDevices•operationalAmplifiers•ElectronicPowerControl•Transducer•TestingEquipment

2.DigitalElectronics•NumberSystemsandCodes•LogicCircuitsandSystems•BasicTreatmentofInterfacingElementsand

Applications

3.IndustrialInstruments•PressureandVacuumMeasurements,

IncludingElectricalMethods•LevelMeasurement•FlowMeasurement•TemperatureMeasurement•Telemetering•AutomaticControl

4.EngineeringScience•Kinematics•AngularMotion•Dynamics•Statics•Hydraulics•Stress,StrainandYoung’sModulus•Heat

5.Mathematics•Equations,ManipulationandWordProblems•Determinants•ComplexNumbers•Trigonometry•SketchGraphs•LimitsandDifferentation•Integration

1.IndustrialElectronics•AlternatingCurrentTheory•PowerSupply•TransistorAmplifiers•operationalAmplifiers•IntegratedCircuits•Transducers•ElectronicPhaseControl•TestEquipment•oscillators

2.DigitalElectronics•NumberSystemsandCodes•LogicCircuitsandSystems•InterfacingElementsandApplications

3.IndustrialInstruments•Flow•AnalyticalInstruments•Control(Hardware)•TemperatureMeasurement•Telemetering•AutomaticControl

4.Mathematics•LimitsandContinuity•Differentiation•ApplicationofDifferentiation•IntegrationTechniques•ApplicationoftheDefiniteIntegral•DifferentialEquations

1.IndustrialElectronics•Transients•Transducers•Ultrasonic•x-RaysandRadioActivity•AutomaticInspectionandTesting•Non-DestructiveTesting•ElectronicSafetyDevices•ThyristorPowerSupplies•ElectronicPowerControl•ProgrammableLogicController(PLC)

2.DigitalElectronics•NumberSystemsandCodes•LogicCircuitsandSystems•InterfacingElementsandApplications

3.IndustrialInstruments•EmmisionSpectroscopy•GasAnalysers•Calorimetry•Chromatography•AutomaticControl•CotrolValves•ProcessReaction•InstrumentationofPlant•ExplosionHazardandIntrinsicSafety

4.Mathematics•Differentiation•IntegrationTechniques•PartialFractions•DifferentialEquations•ApplicationsoftheDefiniteIntegral•ApplicationsWhereDifferentiationand

IntegrationTechniquesareCombined

12V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

NationalCertificate: MECHANICALENGINEERING

Becomeoneoftheinnovatorswhohelpstodevelopnewproductsandmoreefficientprocesses.You’lllearnhowtodrawanddesignforengineering,howtomakethebestuseoftherightmaterialstomakeaproduct,thefundamentalsofmechanotechnics,hydraulicsandmore.

This programme reflects both present and future workplace needs. It will provide graduates thepossibilitytobeemployedwithintheengineeringfieldwiththeflexibilitytopursuedifferentcareersinthebroadermechanicalengineeringfield.

Jointhenextgenerationofmechanicaltechniciansandembraceanintensiveyetenjoyablecareerbyembarking on this comprehensive and practical engineering career pathway. Leading mechanicalengineersandacademicspresenttheprogram.

Bycompletingthiscourseyouwillhavetheskillsandconfidencetoeffectively:

• Evaluateandapplyessentialmethodstotechnicaloperationalsystems

• Analyseandapplyacquiredknowledgeinperformingthetasksandsolvecommonproblems

• Gatherandanalyserelevantinformation,usedatatoapplytheoriesandprincipleswithinengineeringrelatedsituations

• Executeroleandresponsibilitiesbybeingabletosummarize,classify,discussandestimateapplicationprocessesrequiredthroughmathematicalconcepts,technicalandschematicdiagrams,computerandtechnologyusageinarangeofdifferentcontexts

• Communicatewithcolleagues,clientsandmembersofsupervisory/managementlevelsbypresentinginformationreliablyandaccuratelyinspokenandwrittenform

Theoverallaimofthisprogrammeistoprovideyouwithcoremechanicalengineeringskillstoenhanceyourcareerandtobenefityouremployer.Intheengineeringteamtheelectricaltechnicianmayhavetoactasasupervisorinordertointerpretandpassontheinstructionsreceivedfromseniorpersonnel.

CAREERoPPoRTUNITIESAftercompletionofthetheoreticalpartoftheNationalCertificateatlevel6,thestudentmaybeemployedasalearnertechnicianfortheperioddeterminedbytheemployer–aminimumof24months.Aftercompletionofthetrainingperiod,thestudentmaybeappointedasatechnician.

Peopleworkinginthemechanicalengineeringfieldsrequirespecialisedtechnicalskillsandknowledgeinordertomeettherequirementsofcontinuallychangingenvironmentofthevariousindustries.Studentswillacquirethetechnicalknowledgeandskillsthatarerequiredinsmallandmediumbusinessesaswellasprovideaccessandmobilityintohigher-levelmorespecialisedoccupations.

QualifyinglearnersatN6shouldbeabletofindemploymentas:

• Plantoperationsandmaintenancepersonnel

• Designers

• Processtechnicians

• Mechanicaltechnicians

• Mechanicalequipmentsalesexecutive

• Pumpandmechanicalequipmentoperators

• Contractandassetmanagers

CoMPREHENSIVEeBooKSANDASSoCIATEDDoCUMENTATIoNYouwillreceivefourofourup-to-datetechnicaleBookstoaddtoyourlibrary.Togetherthesetextscontainhundredsofpagesofvaluableknow-howdistilledfromyearsofexperienceinpresentingtheseprogramsthroughouttheworld.

• FundamentalsofMechanicalEngineering

• PracticalMechanicalDrives(Belts,ChainsandGears)forEngineersandTechnicians

• PracticalPumpsandCompressorsControl,operation,MaintenanceandTroubleshooting

• PracticalFundamentalsofHeating,VentilationandAirConditioning(HVAC)

Toapplypleasecontact [email protected] 024 5520/1/2/3/4/5

13V0006

N4, N5, N6 certificates leadiNg to NatioNal N diploma (eNgiNeeriNg)

Technology Training that Works

NationalCertificate: MECHANICALENGINEERING

ENGINEERING:MECHANICAL

N4(Any4ofthesubjectsbelow) N5(Any4ofthesubjectsbelow) N6(Any4ofthesubjectsbelow)

1.MechanicalDraughting•ConventionalRepresentationofa

SingleSpurGear,SpurGearsinMesh,SquareThreadsandHelicalSprings

•CamProfiles•SectionalDrawing•DetailedDrawing

•AssemblyDrawing

2.SupervisoryManagement•Thefunctionsofmanagement•Thebasicprinciplesofindustrial

relationsinSouthAfrica•Traininganddevelopmentof

employees•Thebasicprinciplesoffinancial

management•Losscontrol

•Qualitycontrol

3.Mechano-Technics•organisationandLay-outof

Workshops•Calculations:Flat,VeeandConveyor

BeltDrivers•MetalCuttingMachines:ForcesActing

ontheCuttingTools•MetalProtection•PrecisionMeasuringofMachineParts•Bearings•GearDrivers•HydraulicSystems:Elementary

Calculations

4.EngineeringScience•Kinematics•AngularMotion•Dynamics•Statics•Hydraulics•Stress,StrainandYoung’sModulus•Heat

5.Mathematics•Equations,ManipulationandWord

Problems•Determinants•ComplexNumbers•Trigonometry•SketchGraphs•LimitsandDifferentation•Integration

1.MechanicalDrawingandDesign•UltimateandWorkingStressforVarious

Materials.FactorsofSafety.•SingleandDouble-RivetedLapandButt

Joints.Number,SizeandPitchofStudsorBoltsforSteamCylinderCoversandManholeDoors.

•CotterandKnuckleJoints.•PistonRods•Friction•WorkingPressureforBearingsand

Crossheads.•SizeofSolidandHollowShaftstoTransmit

aGivenPower(PureTorsion)•KeysandKeyways•Couplings•Belts•WeldedJoints

2.StrengthofMaterialsandStructures•Forces•Stress,StrainandFactorofSafety•SimpleFramedStructures•ThinCylindersandRivetedJoints•Shafts•StrainEnergy•LoadingofBeams•BendingofBeams•LongColumnsandStruts•SimpleCasesofTemperatureStress•TestingMachines,ApparatusandMethods•TheMixingandPlacingofConcretefor

GeneralPurposes

3.Mechano-Technics•EpicyclicGearsandGearTrains•ReductionGearboxes•BeltDrivesandBeltConveyors•BucketElevatorsandConveyors•RopeHaulagesandAerialRopeways•Elevators•RailandRoadTractionCalculations•Flywheels

4.Mathematics•LimitsandContinuity•Differentiation•ApplicationofDifferentiation•IntegrationTechniques•ApplicationoftheDefiniteIntegral•DifferentialEquations

5.PowerMachines•HeatingandExpansionofGases•SteamGeneration•Condensers•CondensersPumps•Combustion•ReciprocatingAirCompressors•Governors•TheGasTurbine

6.FluidMechanics•GeneralIntroduction•Hydrostatics•Hydrodynamics

1.MechanicalDrawingandDesign•DesignofSelectedAxleswithTorque

andBendingofPulley/GearDrives(SolidandHollowAxles)

•BeltDrives•PulleyandGearArms•Gears•CombinedGearDrivesandGear

Boxes•Cams•JournalBearings•Brakes•Couplings(Plate,Centrifugal)•LongColumnsandSupports•Lubrication(Greasing)

2.StrengthofMaterialsandStructures

•PinJointedFramesStructures•ThickCylinders•CombinedBendingandTwistingas

Applied•TheoryofBending•StrengthandTestingofRopes,

ChainsandAttachmentsinLiftingGear

•SagandTensioninWireRopesandChainsSupportedfromHorizontalPoints

•MixingandPlacingofMassandReinforcedConcrete

•DetailsandConstructionofBrick,ConcreteandMasonryStructures

•TypesofFoundationsandApplications

•organisation,InspectionandEstimatesofQuantities

3.Mechano-Technics•Clutches

•Brakes

•LineShafts

•Flywheels

•ReductionGearboxes

•RailTractionandVehicleDynamics

•Balancing

•Kinematics

4.Mathematics•Differentiation•IntegrationTechniques•PartialFractions•DifferentialEquations•ApplicationsoftheDefinite

Integral•ApplicationsWhereDifferentiation

andIntegrationTechniquesareCombined

5.PowerMachines•Thermodynamics•SteamGeneration•Nozzles•SteamandGasTurbines•InternalCombustionEngines•AirCompressors•Refrigeration

6.FluidMechanics•GeneralIntroduction•FlowInPipesandtheHydraulic

Gradient•WaterFlowinopenCanals•AdvancedCalculationsConcerning

theFlowofWaterThroughorifices•DescriptionsandCalculationsof

Pumps•CalculatingandDescriptionsof

VentilationandAirConditioning•DescriptionandCalculations

ConcerningWaterTurbines•DescriptionandCalculations

ConcerningPeltonWheels

14V0006

engineeRing national teChniCal Diploma pathway

enrolment application Form – part 1

The program fees are per student and include reference manuals, live webinars,assignments, software, program materialssentinelectronicformatandongoingsupport.

You can “pause and restart” by joining asubsequentintake(arejoiningfeemayapply).We will allow up to 3 years from your originalstartdatetocompletetheprogram.

Youcanwithdrawfromtheprogramatanytimeandreceiveastatementofattainmentforthesubjects you have completed. However,successfulcompletionofallsubjectswillearnyoutherelevantNationalTechnicalDiploma.

CANCELLATIoNA fee equivalent to 1 monthly instalment willapply for written cancellations received lessthan 14 days prior to the start date of theprogram.Should students withdraw after IDC hassubmitted their information to the departmentfor capturing and exam purposes, they willforfeitanyamountpaid.

CoNFIRMATIoNofficialconfirmationofyourplacewillbesentbyemailwithin5businessdaysofacceptanceofyourapplication.Detailedprograminstructionswillbesupplieduponstartdate.

PLEASENoTEIDC has no affiliation with suppliers ormanufacturers and therefore presents acompletely unbiased factual view of theindustry.

Instructorsmaychangewithoutnotice.

Webinarschedulesaresubjecttochange.

Unforeseen technical problems may occurresultinginthecancellationorreschedulingofwebinars.

IDCTechnologiesreservestherighttocancelorpostponecoursesifrequiredstudentenrolmentnumbersarenotachieved.

PRIVACYINFoRMATIoNPlease review our privacy policy on thewebsite:www.idc-online.ac.za.

ENQUIRIESForfurtherinformation,pleasephone 0110245520/1/2/3.

DiplomaDetails

PLACESARELIMITED –APPLYToDAY!

NEWFLExIBLE PAYMENTPLAN:

Payinmonthlyinstalments totakethepressureoff!

Shouldyouhavemorepeopleinterestedinparticipatinginthisprogram,pleasecontact uson0110245520/1/2/3oremail:[email protected]

3.PaymentDetails

StartDate: [email protected]

1.ProgramDetails

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

ENGINEERINGNATIoNALTECHNICALCERTIFICATE:N4 N5 N6

PRoGRAMNAME: STARTDATE:

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

INVoICING:INVoICEMYCoMPANY INVoICEME

STUDENTNAME(FirstName,LastName):

JoBTITLE:

ADDRESS:

PHoNES(IncludeCountryCode): 1.DAYTIME:

EMAIL:

EMPLoYER/CoMPANYNAME(Ifapplicable):

ADDRESSFoRINVoICING(Write"asabove"ifsame):

CoUNTRY:

2.StudentDetails[oneformperstudent]

2.MoBILE/CELL:

EMPLoYER'SCoNTACTNAME(Ifapplicable):

EMAIL:CoUNTRY:

PHoNE(IncludeCountryCode): DAYTIME:

PLEASEPRINTCLEARLY

RETURNINGEITSTUDENT?YES NO

SUBURB: PRoVINCE: PoSTCoDE:

SUBURB: PRoVINCE: PoSTCoDE:

PLEASENoTE:PricesshownareinclusiveofVAT

FULLPRoGRAMoPTIoN1–PAYUPFRoNT–5% DISCOUNT(ValueofR2898.00)

Paytotalamountupfront(atleast2weekspriortoprogramstart) R8600.00 =R ____________________________

FULLPRoGRAMoPTIoN2–PAYIN6INSTALMENTSBY CREDIT CARD (R1505.00perinstalment) Payin6easyinstalmentsover6months.Paymentdateswillbeadvisedaheadoftime. 6instalments(TotalR9030.00) =R ____________________________

INDIVIDUALSUBJECTS–R2150.00PERSUBJECT SubjectName: _________________________________________________________________________________________________________________________________________________________________ =R _____________________________ SubjectName: _________________________________________________________________________________________________________________________________________________________________ =R _____________________________ SubjectName: _________________________________________________________________________________________________________________________________________________________________ =R _____________________________

Formoreinformationonpaymentdetailspleasecontactuson0110245520/1/2/3

PleaseNote:Registernowtosecureyourplace.Paymentsareduepriortothestartoftheprogram.

Shouldyouwithdrawwithin14daysofthestartdate,wewillrefundyourpayment,howeverafeeequivalentto1monthlyinstalmentwillberetainedasacancellationfee.

Iwishtopayby: ELECTRoNICFUNDSTRANSFER(Foroption1aboveonly)

CoMPANYoRDERNUMBER: ________________________________________________________________

CREDITCARD

Pleasechargemy: MASTERCARD VISA

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________CARDHoLDER’SNAME:

CARDHoLDER’SSIGNATURE:

ExPIRYDATE:/

onthereverseofyourcardisasecuritynumber.Inorderto authoriseyourcardtransaction,werequirethelast3digits:

IftheCardholder'saddressisnotthesame asshownabovepleasetickthisbox:

Ifyouwouldpreferustocontactyouforyourcard’sexpiryandsecuritycode,pleasetickthisbox:

FeeCode: ______________________________________________

HowtoApply

ByEmail:[email protected]

ByMail: IDCTechnologies WaterfallBusinessPark,BekkerRoad ElevationGardens,ElevationClose Block2,GroundFloor

VornaValleyExt21 Midrand1686

ByFax:(086)6924368

ViaourWebsite:www.idc-online.com


Recommended