+ All Categories
Home > Documents > REHAU RAUvitHERm COOL · manifold and the building. The RAUVITHERM Cool carrier pipe is SDR 11 PE...

REHAU RAUvitHERm COOL · manifold and the building. The RAUVITHERM Cool carrier pipe is SDR 11 PE...

Date post: 25-Jun-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
REHAU RAUVITHERM COOL PRE-INSULATED HEADER PIPES FOR GROUND-SOURCE HEAT PUMPS www.rehau.co.uk/groundsource Building Solutions Automotive Industry
Transcript
Page 1: REHAU RAUvitHERm COOL · manifold and the building. The RAUVITHERM Cool carrier pipe is SDR 11 PE 100 pipe, made to BS EN 12201, which can be used with SDR 11 electrofusion couplers.

REHAU RAUvitHERm COOLPRE-iNSULAtED HEADER PiPES FOR GROUND-SOURCE HEAt PUmPS

www.rehau.co.uk/groundsource Building Solutions

Automotive

Industry

Page 2: REHAU RAUvitHERm COOL · manifold and the building. The RAUVITHERM Cool carrier pipe is SDR 11 PE 100 pipe, made to BS EN 12201, which can be used with SDR 11 electrofusion couplers.

www.rehau.co.uk/groundsource 12.2013/rowy

REHAU RAUvitHERm COOLPRE-iNSULAtED HEADER PiPES FOR GROUND-SOURCE HEAt PUmPS

RAUVITHERM Cool wet end cap

RAUVITHERM Cool pipe

RAUVITHERM Cool is manufactured in North Wales to help reduce REHAU’s carbon emissions.

With the increased uptake of ground source heat pumps and other renewable energy systems, pre-insulated pipe is saving contractors both time and money in reducing heat losses across the whole system. Using the cutting edge RAUVITHERM production tech-nology, REHAU have developed the RAUVITHERM Cool pipe system for low temperature applications such as ground source heat pumps.

It is important to insulate header pipes for ground source heat pumps to avoid transmis-sion between fl ow and return in narrow trenches. This is typically required between the manifold and the building. The RAUVITHERM Cool carrier pipe is SDR 11 PE 100 pipe, made to BS EN 12201, which can be used with SDR 11 electrofusion couplers.

To improve fl exibility, REHAU has optimised the RAUVITHERM Cool pipe composition to improve handling on site. The pipe is available in 40 UNO, 50 UNO and 63 UNO, the most common sizes used in ground source header pipes.

Benefi ts at a glance:• High quality PEX foam insulation for low heat losses• Insulation is bonded to the outer jacket to ensure optimum performance• Manufactured in the UK• Tight bending radius• High quality heat shrink end caps for making watertight underground connections• Robust LLD-PE outer jacket to withstand tough site conditions• Available in 25 or 50m coils

Follow REHAU Renewables

UK & IRELAND SALES OFFICESLondon, REHAU Ltd, The Building Centre, 25 Store Street, London WC1E 7BT Slough, Units 5 J & K, Langley Business Centre, Station Road, Langley, Slough SL3 8DS Phone: 01753 588500 Fax: 01753 588501 Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: 0161 777 7400 Fax: 0161 777 7401 Glasgow, Phoenix House, Phoenix Crescent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: 01698 503700 Fax: 01698 503701 Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: 00353 (0)1 8165020 Fax: 00353 (0)1 8165021

RAUGEO large manifold chamber


Recommended