Reimagine Tomorrow!
Products Experience
ISOCYANATES ( PU – Rigid - Flexible Foam and CASE )
Product Description NCO Content
% wt Main Applications
P-MDI Polymethylene polyphenyl
isocyanate 30,0-32,0
Rigid insulating foams, semi-rigid integral skin, structural foams, elastomers and
adhesives.
M-MDI Diphenylmethane 4,4
Diisocyanate 33,4 min
Elastomers, adhesives, coatings, fibres, flexible-and semi-flexible integral foams and
thermoplastic polyurethanes
L-MDI carbo-diimide modified 4,4'-
diphenylmethane-diisocyanate Liquid MDI
27,5-28,5 Microcellular elastomers, RIM elastomers,
coatings and cast elastomers.
OP-50
monomeric diphenylmethane diisocyanate (MDI) containing
higher 2,4’-, 2,2’diphenylmethane
diisocyante percentage
33,4 min
Used in coating, paint, floor and for
manufacture many household and sporting goods as a row material
Description 2,4 Isomer content
% wt Main Applications
TDI 80-20 Toluene diisocyanate isomer
mixture 79 min Flexible foams, coatings or adhesives.
TDI 65-35 Toluene diisocyanate isomer
mixture 65 min Flexible foams, coatings or adhesives.
TDI 100 Toluene diisocyanate 98,5 min Coatings or adhesives.
Product Description
NCO Content % wt
Main Applications
NDI 1,5-Naphthylene diisocyanate 40 Elastomer and microcellular
XDI 1,3-Bis(isocyanatomethyl)benzene better resistance to yellowing than those from aromatic diisocyanates, such as tolylene diisocyanate (TDI) and diphenyl methane diisocyanate (MDI). igher reactivity
HDI
Hexamethylene-1,6-diisocyanate
HDI is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous
dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility
IPDI (Isophorone diisocyanate
IPDI is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous
dispersible polyurethane polymers (PUD) showing exceptional weathering resistance
H12 MDI
POLYOLS ( PU – Rigid - Flexible Foam )
Product
Functionalit
y Eq.
Hydroxy value
mg KOH/g
Viscosity at 25°C mPa.s
Description Main Applications
S 360 4,7 360-400 2000-3500 Polyether Polyol
(Sucrose Based)
Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood
imitation.
S 400 5-5,5 400-450 4000-6000 Polyether Polyol
(Sucrose Based)
Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood
imitation.
S 480 5-5,5 460-490 6500-9000 Polyether Polyol
(Sucrose Based)
Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood
imitation.
M 410 4,5 400-450 6000-
13000 Aromatic Polyol
(Mannich Based)
Rigid systems for panels in continuous and discontinuous, Spray with better fire
resistance.
M 500 4 480-520 9000-16000
Aromatic Polyol (Mannich Based)
Rigid systems for panels in continuous and discontinuous, Spray with better fire
resistance.
G 36 3 33-39 700-1000 Polyether Polyol
(Glycerol Based) M.W. 4700
Semi-Rigid/Integral Skin self-skinning foam for automotive industry.
G 28 3 25-31 800-1000 Polyether Polyol
(Glycerol Based) M.W.6000
Semi-Rigid/Integral Skin self-skinning foam for automotive industry used in cold
moulding (high resilience foam).
G 160 3 150-170 260-300 Polyether Polyol
(Glycerol Based) M.W.1000
Low viscosity polyol used in combination with other polyols . For Pu compact/Structural in
furnishing.
G 400 3 360-410 380 -430 Polyether Polyol
(Glycerol Based) M.W.420
Low viscosity polyol used in combination with other polyols . For Pu compact/Structural in
furnishing.
G 250 3 230-270 240-300 Polyether Polyol
(Glycerol Based) M.W.670
Blending polyol suitable for high contents of water rigid systems.
P 48-Standard 3 47-49 500-550 non-reactive polymer
polyol 3500 MW SLAB - flexible polyurethane foam
PP 10 3 39-43 800-1050 non-reactive polymer
polyol, about 10% solid substance
SLAB - flexible polyurethane foams
PP 15 3 37-41 1100-1300 non-reactive polymer
polyol, about 15% solid substance
SLAB - flexible polyurethane foams
PP 27 3 33-37 2200-4200 non-reactive polymer
polyol, about 27% solid substance
SLAB - flexible polyurethane foam
Product Description Main Applications
SORBITOL Polyols
Polyether Polyol s (Sorbitol Based)
Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation.
AMMINIC Polyols
Polyether Polyol s (Amines Based)
Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation.
ESTER Polyols Aromatic Polyester polyols (different MW, on request)
Rigid Foams – Flexible Face Lamination (FFL)
B IO - Polyols Bio Polyol based
(different MW, on request) Rigid Pu foam. Building and Industrial Thermal
Insulation, Packaging, Wood imitation.
POLYOLS ( PU - CASE )
Product Molecul
ar Weight
Hydroxy Number
mg KOH/g Description Main Applications
PTMG 650 650±50 - Polytetramethylene
ether glycol High performance PU TPU's elastomers, coatings
and elastomeric fibers.
PTMG 1000 1000±50 106,9-118,1 Polytetramethylene
ether glycol High performance PU TPU's elastomers, coatings
and elastomeric fibers.
PTMG 2000 2000±50 54,7-57,5 Polytetramethylene
ether glycol High performance PU TPU's elastomers, coatings
and elastomeric fibers.
PTMG 3000 3000±50 36,2-38,7 Polytetramethylene
ether glycol High performance PU TPU's elastomers, coatings
and elastomeric fibers
Product Description Main Applications
ESTER polyols
Aromatic Polyester polyols (different MW, on request)
High performance PU TPU's elastomers, coatings and elastomeric fibers.
B IO - Polyols Bio Polyol sbased
(different MW, on request) High performance PU TPU's elastomers, coatings
and elastomeric fibers.
Product Description Main Applications
PPG 250 (A) Polypropylene glicol (PPG M.W. 400)
(A) = FDA GRADE
Elastomers, coatings . Blending polyol for low viscosity rigid foam.
PPG 120 (A) Polypropylene glycol (PPG M.W. 1000)
(A) = FDA GRADE Flexible foam, adhesives, antifoaming agent, lubrication,
polyesters syntesis.
PPG 56 (A) Polypropylene glycol (PPG M.W. 2000)
(A) = FDA GRADE Flexible foam, elastomers, coatings, adhesives,
antifoaming agent, lubrication.
PEG 200 Polyethylene glycol (M.W. 200) Microcellular, elastomers.
PEG 300 Polyethylene glycol (M.W. 300) Microcellular, elastomers.
PEG 400 Polyethylene glycol (M.W. 400) Microcellular, elastomers.
GLICERINA Glycerine Various.
SILICONES ( PU – Rigid - Flexible Foam and CASE )
PU – FLEXIBLE FOAM
Product type
Conventional Foam High Resilience Foam
Product Description W
ide
Pro
gre
ssin
g
Eff
icie
ncy(H
igh
,
Me
diu
m, L
ow
)
Su
ita
ble
fo
r F
R F
oa
ms
Ge
ne
ral P
urp
ose
Hig
h D
ensity
Lo
w D
ensity
Lo
w
vo
latilit
y
AK-6678 L ■ low activity silicone surfactant, suitable for density 25~45kg/m
3
formulation
AK-6688/ AK-6689 ■ M middle activity silicone surfactant,, suitable for density 13~30kg/m
3
formulation
AK-6610 H high activity f silicone surfactant,, suitable for density below 6- 25kg/m
3
formulation
AK-7335 ■ ■ Low efficiency, low volatility silicone surfactant for high density HR TDI and MDI systems.
AK-7333 ■ ■ ■ General purpose HR slab silicone, low volatility
AK-7330 ■ ■ ■ High efficiency HR slab silicone for extra stability
PU – RIGID FOAM
Product type
Performance Character Application Suggestion
Product Description
Cell
Siz
e(V
ery
Fin
e, F
ine
, M
ediu
m
Em
uls
ific
atio
n(H
igh
, M
ediu
m, L
ow
)
Fo
am
Flo
w a
bili
ty(H
igh
, M
ed
ium
, L
ow
)
Imp
rove
Dim
ensio
nal S
tabili
ty
Iso
Com
pa
tib
le(C
ap
pe
d S
urf
acta
nt)
Ge
ne
ral P
urp
ose
14
1b
A
pp
liance
Pe
nta
ne
A
pplia
nce
HF
C
Ap
plia
nce
14
1b
L
am
ination
Pe
nta
ne
L
am
ina
tio
n
HF
C
La
min
atio
n
All
wa
ter
blo
win
g a
gen
t
Blo
ck F
oa
m
Sp
ray /p
ackin
g
On
e C
om
po
ne
nt
Foa
m (
1K
)
PIR
AK-8801 M M M suitable for HCFC-141b system
AK-8802 F M H
Suitable for cyclopentane system. with
good emulsifying property and nucleation,
has high cost performance
AK-8803 V M H suitable for cyclopentane and HCFC-141b
system, with good nucleation and fluidity
AK-8804 M H ■ Excellent FR properties.
AK-8805 V M H
Very wide application filed. Suitable for
HCFC-141b, cyclopentane and water
systems.
AK-8806 M H M
used for polyester polyurethane rigid foam
plastic, will make polyester have good
compatibility with other mixed
components, no layer for long storage
AK-8808 V H H suitable for HFC-365/227 system, foam
has low thermal conductivity
AK-8809 V H H suitable for HFC-245fa system, foam has
good synthetical performance
AK-8810 M H H suitable for iso-cyclopentane, with good
nucleation and fluidity
AK-8811 M H M suitable for HCFC-141b system, foam has
good synthetical performance
AK-8812 V L H
suitable for HCFC-141b system, strong
nucleation bring foam low thermal
conductivity
AK-8818 M H H
Suitable for all water and pentane system,
with good emulsifying property and good
effect to remove surface voids
AK-8825 F M H suitable for iso-cyclopentane, with good
nucleation and fluidity
AK-8830 V L H
Has good synthetical characters, suitable
for pentane blowing agent to produce
foam with low thermal conductivity and
superior adhesive strength
AK-8832 V M H
suitable for 141b system, with good
nucleation and fluidity , foam has uniform
density distribution
AK-8839A M M M Suitable for packaging materials.
AK-8872 M L M suitable for one component adhesive
manufacture
AK-8882 F H H
with stronger nucleation to obtain very fine
cellular structure and high amount of
closed cells, bring foam low thermal
conductivity and enhance thermal
insulation
AK-8889 V M H Reduce surface voids and make foam
products have good synthetical performs
PU - ELASTOMER
OPENER FOR PU - RIGID FOAM
Product Type
Cel
l o
pen
abil
ity l
ow
Cel
l o
pen
abil
ity m
ediu
m
Cel
l o
pen
abil
ity s
tron
g
Product Description
AK-9901 ■ used in the production of rigid polyurethane foams, cell opened ability low
AK-9903 ■ used in the production of rigid polyurethane foams, cell opened ability high
AK-9905 ■ used in the production of rigid polyurethane foams, cell opened ability middle
Product Type
Po
lyeth
er
Ba
sed
Syste
ms
Po
lyeste
r B
ase
d S
yste
ms
Hig
h D
ensity
Lo
w D
en
sity
Fin
e c
ell
Str
uctu
re
Imp
rove
d
Dim
en
sio
na
l
Sta
bili
ty
Imp
rove
d S
urf
ace
Ap
pe
ara
nce
Product Description
AK-8804 ■ ■ ■ General Purpose for shoe sole manufacture
AK-8840 ■ ■ ■ ■ ■ ■ Surfactant providing excellent cell structure and improved surface appearance in low density systems.
AK-8841 ■ ■ ■ ■ ■ ■
Surfactant providing excellent dimensional stability in low density systems.
CROSS LINKERS ( PU – CASE )
Product CAS number Description Main Application
MOCA HR 101-14-4 4,4 Methylene bis (2- chloroaniline)
GRANULES - PELLETS Curing and crosslinking agent for
elastomer.
MOCA MS 101-14-4 4,4 Methylene bis (2- chloroaniline)
MICROSPHERE Curing and crosslinking agent for
elastomer.
ETA 100 68479-98-1
Diethyltoluenediamine (DETDA)
Misture of : 3,5 diethytoluene-2,4-diamine
3,5 diethytoluene-2,6-diamine
Curing and crosslinking agent for elastomer, chain extender.
ETA 300 106264-79-3
DI(METHYLTIO) TOLUENDIAMINE (DMTDA) Misture of :
1,2 benzenediamine,4 methyl 2,6 bis (methyl tio)
1,3 benzenediamine,2 methyl 4,6 bis (methyl tio)
Curing and crosslinking agent for elastomer.
Product CAS number Description Main Application
1,4 BDO
110-63-4 1-4 Butanediol
Chain extender for elastomer and microcellular.
Product CAS
number Description Main Application
D- 2000 POLYETHERAMINE Polyurea
T- 5000 POLYETHERAMINE Polyurea
D -230 POLYETHERAMINE Epoxy
T- 403 POLYETHERAMINE Polyurea
D - 400 POLYETHERAMINE Polyurea
FLAME RETARDANTS ( PU – Rigid - Flexible Foam )
Product CAS number Description Main Applications
TCPP/TMCP 13674-84-5 Trichloropropyl-
phosphate Flexible foams.
TEP 78-40-0 Triethyl phosphate Plasticizer for tough, fire-resistant plastics.
CATALYSTS - AMINES ( PU – Rigid - Flexible Foam and CASE )
Product CAS number Description Main Applications
A1 23% 3033-62-3
Bis (2-Dimethylaminoethyl)
ether 23 % dipropylene glycol
Catalysis of the blowing reaction.
A1 70% 3033-62-3
Bis (2-Dimethylaminoethyl)
ether 70 % dipropylene glycol
Catalysis of the blowing reaction.
DEA 90-10 111-42-2 Diethanolamine 90% Absorbent for acidic gases, textiles specialities, emulsifiers, cosmetics, inks, cleaners, polishes.
TEA 102-71-6 Triethanolamne 85% Surface active agent, textile specialties, waxes,
polishes, herbicides, petroleum demulsifier.
TEDA 33 DPG 280-57-9 Triethylene diamine 33%
(DPG ) Catalyst.
TEDA 33 MEG 280-57-9 Triethylene diamine 33%
(MEG) Catalyst.
TEDA 100 280-57-9 Triethylene diamine Multi-purpose amine catalyst, gelation catalysis.
DMEA 108-01-0 Dimethylethanolamine Catalyst PU industry, water purification, curing agent for alkid resins, unsaturated polyester.
MDEA 105-59-9 Methyldiethanolamine Detergents, Treatment of acidic gases,
Coatings,Textiles,Paper , Pharmaceuticals.
DMCHA 98-94-2 Dimethyl cylohexylamine Tertiary amine catalyst. rigid form, half-rigid
form and soft form.
DMBA 103-83-3 N,N Dimethylbenzylamine Intermediate in organic synthesis, counteract
reagent of acid, lost H catalysis and synthesize catalyst for polyurethane rigid foam.
DMDEE 6425-39-4 2.2 Dimorpholinodiethylether Amine blowing catalyst for one and two
component rigid foam sealant systems, flexible slabstock.
JD 10 Triazina 15875-13-5 N,N’,N”-Dimethylaminopropyl
hexahydro triazine Catalyst PU and PIR reaction. used in spray.
Named also as PC-41.
DMI 80-73-9 Dimethyl-2-Imidazolidinone Catalyst PU.
DMIPA 996-35-0 Dimethylisopropylamine Catalyst PU.
PMDTA 3030-47-5 Pentamethyl
diethylenetriamine Flexible and rigid foam plastics of polyurethane.
EPOXY RESINS
STANDARD LIQUID TYPE
Product EEW
(gr/eq) Viscosity
(cPs at 25°c) Hy-Cl (wt %)
Specific Gravity
*1
(20°C)
Color (G )
Characteristics/use
Medium Viscosity
128 184-190 11500-13500
0,5 max 1,17 0,5 max Standard Type
Standard Liquid Epoxy Resin
127 180-190 8000-11000 0,5 max 1,17 0,5 max General uses
STANDARD SOLID TYPE - POWDER COATING
Product EEW
(gr/eq)
Melt Viscosity CPs 150 °
C
Softening Point-(C) KD
AS 25
Relative Density
Color (G ) Characteristics/use
Powder Coating
Epoxy Resin
012 600-700 800-1600 75-85 1,16-1,20 0,5 max
hybrid system in combination with polyester resin or straight
epoxy system. God gloss, flow, mechanical properties
and chemical resistance
Powder Coating Resin
013 780-840 1500-4000 88-95 1,16-1,20 0,5 max
hybrid system in combination with polyester resin or straight
epoxy system. Good gloss, flow, mechanical properties
and chemical resistance.
Powder Coating Resin
014 900-1000
3000-7000 91-102 1,16-1,20 0,5 max
hybrid system in combination with polyester resin or straight
epoxy system. Good gloss, flow, mechanical properties
and chemical resistance
Standard Solid Resin
017 1750-2100
115-125 1,16-1,20 1 max
unmodified Bisphenol-A type solid Epoxy Resin designed for use in high performance,
Typical uses are process equipment coating enamels,
collapsible tube coatings, can coating, metal furniture
finishes, and wire enamels.
High Molecular
Epoxy Resin
019 2500-3800
120-150 1,16-1,20 1 max
unmodified Bisphenol-A type solid Epoxy Resin designed for use in high performance
one-package baking finishes. Typical uses include process equipment coating enamels,
collapsible, tube coatings, can coating, PCM, metal furniture finishes, and wire enamels .
Powder Coating Resin
213 730-840 3000-7000 88-98 1,16-1,20 0,5 max
hybrid system in combination with polyester resin or straight
epoxy system.Good gloss, mechanical properties and
chemical resistance.
SPECIALTIES
Product Description Main Application
PREPOLIMER 15% NCO Prepolymer based on Diphenylmethane – 4,4 diisocyanate liquid at room temperature
Polyurea Spray Coating
POLIOL-CAT PP Poliols Mix Polyurea Spray Coating
POLIOL-CAT PI Poliols Mix Ibrid - Polyurea Spray Coating
Product Description Main Application
HOT and COLD PU – CASTING ELASTOMERS
PU system: TDI and MDI based Chain extender : MOCA and 1.4 BDO Machines: MIXER-ONE
Suitable for moulding of PU - cast elastomers
GREEN CHEMICALS
Product Description Supplier
Latex Spec Low Ammonia 60% LAL
60 % DRC concentrated Low Ammonia Thailand
Latex Spec High Ammonia 60% HAL
60% DRC concentrated High Ammonia Thailand
TRADING
Product CAS number Description Supplier
BPA 80-05-7 Bisphenol A Various .
Used primarily to make polycarbonate plastic and epoxy resins
BPF 2467-02-9 Bisphenol F Various
Used for epoxy resins
ADIPIC ACID
ANHYDRIDE