R E I N V E N T S P A C E S
Connectorinstallation guide
Preparing LED Strips for Connection G
uide
Make sure you have the correct products for your project and check them to see if there
Remember: Test your setup everytime before installing a new section. Example:
01.
02.
03.
04.
‹‹
‹‹ When installing connectors with the UltraBright Architectural Dynamic TunableStrip Light (UB-AS-DYN) or the UltraBright Accent Dynamic Tunable White(UB-AT1-DYN), you will need some more copper pad to work with.You need to cut both solder pads so that the piece to be attached to theconnector has more surface area to insert into the connector head.
+ +
--
Grip Connectors
connector.
You
01.
03.
02.
04.
++
__
+
+
_
_
03.
02.01.
04.
much excess force.
knife or sharp point.
Tray Connectors
01.
03.
05.
02.+
+
__
+
+
_
_
03. 04.
02.
06.
04.
01.
If your lights are not turning on,
are matched.
The connectors are
Call (925) 273-9080 option 3for after sales support
Contact our team of technicians at
DCAC
informationContact 1-844-353-9347