relays and optocouplers - WAGO · PDF fileWAGO provides a broad range of relays and...

RELAYS AND OPTOCOUPLERS

– 2 –

WAGO provides a broad range of relays and optocouplers to support applications where electrical signals must be transmitted, isolated, adjusted or amplified. To perform these tasks WAGO provides cost-effective solutions available in easy to install packages. With a wide product offering including different housing options, wide voltage ranges, switchable loads from 1 mA to 16 A, pluggable relays, easy termination of conductors from 28-12 AWG and several accessories designed to optimize machine safety and uptime, WAGO’s relays and optocouplers are a truly universal solution.

BENEFITS

Relays and Optocouplers• Jumpering capabilities• Reliability• Compact design to maximize cabinet space• Wide product offering accommodates most applications• Easy to install

WAGO RELAYS AND OPTOCOUPLERS

859 Series 857 Series 788 Series 858 Series

WAGO RELAYS AND OPTOCOUPLERS

286 Series 288 Series 789 Series

– 2 –

– 3 –

TABLE OF CONTENTS

RELAYS AND OPTOCOUPLERSIntroduction

2

859 SERIES 6 mm Wide Terminal Block Style with Soldered PCB Relays or Optocouplers

4 – 7

857 SERIES 6 mm Wide Terminal Block Style with Pluggable PCB Relays or Optocouplers

8 – 11

788 SERIES 15 mm Wide Socket Style Pluggable PCB Relays or Optocouplers

12 – 15

858 SERIES 31 mm Wide Socket Style Pluggable “Ice Cube“ Relays

16 – 18

ACCESSORIES 788, 857, 858, and 859 Accessories

19

286 SERIES Pluggable Module with Relays or Optocouplers for Terminal Blocks

20 – 25

288 SERIES Open Style PCB Carrier with Soldered PCB Relays or Sockets

26 – 29

789 SERIES 17 mm Wide Enclosed Style PCB Carrier with Soldered PCB Relays

30 – 32

ACCESSORIES 286 and 789 Accessories

33

– 3 –

– 4 –

859 Series6 mm Wide Terminal Block Style with Soldered PCB Relays or Optocouplers

With a large variety of relays and optocouplers, the 859 Series will suit any industrial interface application. The compact housing is ideal for space-restricted control panels. Simple commoning at the control and load-side level saves valuable wiring time and reduces errors.

Vibration-proof - fast - maintenance-freeCAGE CLAMP® COMPACT handling for all types of conductors

Solid Stranded Ferruled

– 4 –

– 5 –

6 mm Wide Terminal Block Style with Soldered PCB Relays or Optocouplers

• 6 mm wide housing for DIN-rail mounting

• Jumpering capabilities

• LED indication

• Integrated test port at each termination

• Marking options

Custom Solutions Available -

Contact Factory

– 5 –

– 6 –

859 Series6 mm Wide Terminal Blocks with Soldered PCB Relays

Description Item Number

Nominal Input Voltage

Max. Switching Voltage

Max. ContinuousCurrent Approvals

Relay with SPDT (1 C/O)A1 +

14

12

11

A2 –

859-302859-303859-304859-305859-306859-307859-308

5 VDC12 VDC24 VDC48 VDC60 VDC110 VDC220 VDC

250 VAC 5 A rg 1

Relay with SPDT (1 C/O)

14

12

11

A1

A2

859-353859-354859-355859-357859-358

12 VAC/VDC24 VAC/VDC48 VAC/VDC115 VAC/VDC230 VAC/VDC

250 VAC 5 A rg 1

Relay with SPDT (1 C/O),with gold contacts

A1 +

14

12

11

A2 –

859-314 24 VDC 250 VAC* 5 A* rg 1

Relay with SPDT (1 C/O),with gold contacts, extendedinput voltage, and temperature range

859-392859-386859-384859-317

24 VDC36 VDC48 VDC115 VDC

250 VAC* 3 A* rg 1

Relay with SPDT (1 C/O),with gold contacts 14

12

11

A1 ~

A2 ~

859-359 230 VAC 250 VAC* 5 A* rg 1Relay with SPDT (1 C/O),with gold contacts 859-360 115 VAC 250 VAC* 5 A* rg 1Relay with SPDT (1 C/O),with gold contacts 859-318 250 VAC* 250 VAC* 5 A* rg 1Relay with SPDT (1 C/O) 859-367 115 VAC 250 VAC 5 A rg 1Relay with SPDT (1 C/O), with specified turn-on and turn-off threshold

14

12

11

A1 ~

A2 ~ 859-368 230 VAC 250 VAC 5 A rg 1

Relay with SPDT (1 C/O), with extended input voltage andtemperature range

14

12

11

A1 +

A2 –

859-390 24 VDC 250 VAC 3 A rg 1

Relay with SPDT (1 C/O),with extended input voltage andtemperature range

14

12

11

A1 +

A2 –

859-391 110 VDC 250 VAC 3 A rg 1

Relay with SPDT (1 C/O),with extended input voltage andtemperature range

859-398859-394859-397859-393859-399

24 VDC36 VDC48 VDC72 VDC110 VDC

250 VAC 3 A rg 1

* To avoid damage to the gold layer, the specified switching voltages and switching currents should not be exceeded. The evaporation of the gold layer can reduce the life of the relay.

– 6 –

– 7 –

6 mm Wide Terminal Blocks with Soldered Optocoupler



Output Voltage Range


Optocouplers with extended output voltage and temperature range for railway applications

859-793 5 VDC 3 ... 60 VDC 100 mA rg 1

Optocouplers with extended output voltage and temperature range for railway applications

859-791859-794

24 VDC24 VDC

7 ... 60 VDC9 ... 60 VDC

100 mA 100 mA rg 1

Optocoupler

859-796 24 VDC 3 ... 30 VDC 100 mA rg 1859-795 5 VDC 3 ... 30 VDC 100 mA rg 1

Optocoupler, negative switching, power optocoupler 859-720 24 VDC 10 ... 30 VDC 3 A rg 1

Optocoupler, power optocoupler 859-730 24 VDC 3 ... 30 VDC 3 A rg 1Optocoupler, power optocoupler 859-740 24 VDC 3 ... 30 VDC 3 A rg 1Optocoupler, power optocoupler 859-744 12 ... 48 VDC 3 ... 53 VDC 4 A rg 1Optocoupler PNP, increased input voltage, frequency to 100 Hz, input voltage up to 270 VAC

859-772 230 VAC 20 ... 30 VDC 500 mA rg 1

Optocoupler, negative switching 859-712 24 VDC 20 ... 30 VDC 500 mA rg 1

Optocoupler, negative switching 859-702 5 VDC 20 ... 30 VDC 500 mA rg 1Optocoupler, negative switching 859-708 24 VDC 20 ... 30 VDC 500 mA rg 1Optocoupler, negative switching 859-706 24 VDC 4 ... 6.25 VDC 500 mA rg 1Optocoupler, positive switching 859-752 5 VDC 20 ... 30 VDC 500 mA rg 1Optocoupler, positive switching 859-758 24 VDC 20 ... 30 VDC 500 mA rg 1Optocoupler, positive switching 859-756 24 VDC 4 ... 6.25 VDC 500 mA rg 1

Optocoupler 859-902 5 VDC 24 ... 260 VAC 500 mA rg 1

A1 +

A2 –

1+

2–

RL

A1 +

A2 –

1+

2–

RL

A1+

A2–

RL

0V

A

24V

RL

1+

3

2–

24 V

A

0 V

A2 ~

A1 ~

A2 ~

A1 ~

0 V

+24 V

ARL

A2 —

A1 +

0 V

+24 V

ARL

A2 —

A1 +

0 V

+5 V

ARL

A2 —

A1 +

0 V

+24 V

A

RL

A2 —

A1 +

0 V

+24 V

ARL

A2 —

A1 +

0 V

+24 V

A

RL

13+

14A2−

A1+

A1 +

A2 –

RL

+A

-2-2

A1 +

A2 –

RL

+A

-2

A1 +

A2 –

1+

2–

RL

A1 +

A2 –

1+

2–

RL

– 7 –

– 8 –

Vibration-proof - fast - maintenance-freePush-in CAGE CLAMP® handling for all types of conductors


857 Series6 mm Wide Terminal Block Style with Pluggable PCB Relays or Optocouplers

With a common profile and 6 mm-wide housing, 857 Series relays and optocouplers provide a powerful compact solution for interface applications. An optional interface adapter plugs into the input or output side, combining eight modules to reduce wiring time and errors.

– 8 –

– 9 –

6 mm Wide Terminal Block Style with Pluggable PCB Relays or Optocouplers

• Pluggable relays or optocouplers


• LED indication

• Wide input voltage range (5 - 230 VAC/VDC versions)

• Up to 6 A switching current

• Marking options

• Can be used with 857 Series signal conditioners

With Interface Adapter

– 9 –

– 10 –

857 Series6 mm Wide Sockets with Pluggable PCB Relays or Optocouplers





Relay with SPDT (1 C/O)

857-303857-304857-305857-306

12 VDC24 VDC48 VDC60 VDC

250 VAC 6 A rg 1

A2

A1

857-354857-357857-358857-359*

24 VAC/VDC115 VAC/VDC230 VAC/VDC

24 ... 230 VAC/VDC

250 VAC 6 A rg 1

Relay with SPDT (1 C/O),with gold contacts

857-314 24 VDC 250 VAC* 6 A** rg 1

A2

A1

857-364857-367857-368857-369*

24 VAC/VDC115 VAC/VDC230 VAC/VDC

24 ... 230 VAC/VDC

250 VAC* 6 A** rg 1

Optocouplers

13

N.C.

14

857-704 24 VDC 0 ... 48 VDC 100 mA r1

13

14

N.C.A2

A1

857-707 115 VAC/VDC 0 ... 48 VDC 100 mA r1857-708 230 VAC/VDC 0 ... 48 VDC 100 mA r1

Optocouplers

13

14

N.C.

857-714 24 VDC 24 ... 240 VAC 1 A r1

A2

A1 13

14

N.C.

857-717 115 VAC/VDC 24 ... 240 VAC 1 A r1857-718 230 VAC/VDC 24 ... 240 VAC 1 A r1

Optocouplers

13

14

N.C.

857-724 24 VDC 0 ... 24 VDC 2 A r1

A2

A1 13

14

N.C.

857-727 115 VAC/VDC 0 ... 24 VDC 2 A r1857-728 230 VAC/VDC 0 ... 24 VDC 2 A r1

** To avoid damage to the gold layer, the specified switching voltages and switching currents should not be exceeded. The evaporation of the gold layer can reduce the life of the relay.

*Approvals pending

– 10 –

– 11 –

8 - Port Interface Adapter for System Wiring

Description ItemNumber Input Voltage Current Carrying

CapacityMax. Continuous

Current Approvals

8-port adapter, with 14 -pin ribbon cable connectors, input positive switching **

857-981 24 VDC 1 A 2.5 A

8-port adapter, with 14-pin ribbon cable connectors, output PNP ***

857-982 24 VDC 1 A 2.5 A

8-port adapter, with D-sub male connector, input with 15-pin ribbon cable plug connectors, plus switching **

857-986 24 VDC 1 A 2.5 A

** Use on the coil side of the 857 - socket*** Use the contact page of the 857 - socket

6 mm Wide Sockets with Pluggable PCB Timer Relays


Input Voltage Range



Multifunction timer with SPDT (1 C/O), 4 functions, 4 time ranges: 0.1 s ... 30 min

857-604 16.8 … 31.2 VDC 250 VAC 6 A r1

Solid -state relay with 1 NO contact, 4 functions, 4 time ranges: 0.1 s ... 30 min

857-624 20.4 … 31.2 VDC 0 … 24 VAC 2 A r1

Solid -state relay with 1 NO contact, 4 functions, 4 time ranges: 0.1 s ... 30 min

857-634 20.4 … 31.2 VDC 24 … 230 VAC 1 A r1

Multifunction timer with SPDT (1 C/O), 14 functions, 8 time ranges 857-640 16.8 … 31.2

VDC 250 VAC 6 A r1

Multifunction timer with SPDT (1 C/O), 7 functions, 2 x 8 time ranges

857-642 16.8 … 31.2 VDC 250 VAC 6 A r1

1

2

3 + ―

4

5

6

7

8

9

10

11

12

13

14

Interface

FLK 14

1

2

3 + ―

4

5

6

7

8

9

10

11

12

13

14

Interface

FLK 14

+ ―1

9

Interface

SUB-D

A1+

A2– S1 … S4

14

11

12

24 V

5 V

μC

A1+

A2– S1 … S4

14RL13+N.C.

24 V

5 V

μC

A1+

A2– S1 … S4

14RL13+N.C.

24 V

5 V

μC

US

GND DOS1 … S10

St

14

11

1224 V

5 V

μC

US

GND DOS1 … S10

St

14

11

1224 V

5 V

μC

– 11 –

– 12 –

788 Series15 mm Wide Socket Style Pluggable PCB Relays or Optocouplers

788 Series pluggable PCB relay modules provide an excellent platform for industrial and process automation applications. A robust, easy-to-use lever simplifies replacement.



– 12 –

– 13 –

15 mm Wide Socket Style Pluggable PCB Relays or Optocouplers

• Relays with SPDT (1 C/O) or DPDT (2 C/O)

• Up to 16 A and 250 V of switching power

• DIN-rail mount

• Pluggable LED indicator

• Integrated test ports

• Marking options

– 13 –

– 14 –

788 Series15 mm Wide Sockets with Pluggable PCB Relays

Description ItemNumber




Relay with SPDT (1 C/O) and power indicator (mounting height: 15 mm)

788-303 788-304 788-305 788-306 788-307

12 VDC 24 VDC 48 VDC 60 VDC 110 VDC

250 VAC 16 A rg 1

Relay with DPDT (2 C/O) and power indicator (mounting height: 15 mm)

788-311 788-312 788-313 788-314 788-315

12 VDC 24 VDC 48 VDC 60 VDC 110 VDC

250 VAC 2 x 8 A rg 1


788-506 788-507 788-508

24 VAC 115 VAC 230 VAC

250 VAC 16 A rg 1

Relay with DPDT (2 C/O) and power indicator (mounting height: 15 mm)

788-512 788-515 788-516

24 VAC 115 VAC 230 VAC

250 VAC 2 x 8 A rg 1

Relay with SPDT (1 C/O), with gold contacts and power indicator (mounting height: 15 mm)

788-404 24 VDC 250 VAC* 16 A* rg 1

Relay with DPDT (2 C/O), with gold contacts and power indicator (mounting height: 15 mm)

788-412 24 VDC 250 VAC* 2 x 8 A* r 1

Relay with SPDT (1 C/O),with gold contacts andpower indicator(mounting height: 15 mm)

788-607 788-608

115 VAC 230 VAC 250 VAC* 16 A* rg 1

Relay with DPDT (2 C/O),with gold contacts and power indicator (mounting height: 15 mm)

788-615 788-616

115 VAC 230 VAC 250 VAC* 2 x 8 A* rg 1


– 14 –

– 15 –

15 mm Wide Sockets with Pluggable PCB Relays

15 mm Wide Sockets with Pluggable PCB Optocouplers






788-354 24 VDC 250 VAC 16 A rg 1

Safety relay SR2M DPDT (2 C/O), with force guided contacts and power indicator

788-384 24 VDC 250 VAC 6 A r 1

Relay with SPDT (1 C/O), manual operation and power indicator with extended input voltage and temperature range

788-391 24 VDC 250 VAC 16 A 1

Relay with DPDT (2 C/O), manual operation and power indicator with extended input voltage and temperature range

788-390 24 VDC 250 VAC 2 x 8 A 1





Optocouplers 788-700 24 VDC 0 ... 24 VDC 3.5 A r 1

Optocouplers 788-701 24 VDC 0 ... 24 VDC 5 A r 1

Optocouplers 788-720 24 VDC 24 ... 240 VAC 1 A r 1

Optocouplers 788-721 24 VAC/VDC 12 ... 275 VAC 4 A r 1

13 +

A1+

A2-

14 -

13 +

A1+

A2-

14 -

A1+

A2-

13

14

14 ( )Last

A1

A2

13 (L)

A1+

A2-

14

11

12

14

11

12

24

21

22

A1+

A2-

– 15 –

– 16 –

858 Series31 mm Wide Socket Style Pluggable “Ice Cube“ Relays


For conventional relay applications with standard pin spacing, 858 Series relay modules provide flexible DIN-rail mounted solutions. The sockets carry 33.5 to 35.5 mm high relays equipped with DPDT (2 C/O) or 4PDT (4 C/O).


– 16 –

– 17 –

• Relays with 5 A power contacts or 50 mA gold contacts for dry switching applications

• LED indication


• Marking options

– 17 –

– 18 –

858 Series31 mm Wide Socket with Pluggable “Ice Cube“ Relays





Relay with 4PDT (4 C/O)14

34

24

44

12

32

22

42

11

31

21

41

A1

A2-

+

858-304 24 VDC 250 VAC 4 x 5 A rg 1

Relay with 4PDT (4 C/O), with gold contacts

858-314 24 VDC 250 VAC* 4 x 5 A* rg 1

Relay with 4PDT (4 C/O) 858-507 858-508

115 VAC 230 VAC 250 VAC 4 x 5 A rg 1

Relay with 4PDT (4 C/O),with gold contacts

858-517 858-518

115 VAC 230 VAC 250 VAC* 4 x 5 A* rg 1

Relay with 4PDT (4 C/O), with extended input voltage and temperature range

858-354 858-355 24 VDC 250 VAC 4 x 5 A 1

Relay with DPDT (2 C/O)

858-324 24 VDC

250 VAC 2 x 12 A 1858-528 230 VAC


24

14

22

12

21

11A1+

A2-

24

14

22

12

21

11A1

A2

14

34

24

44

12

32

22

42

11

31

21

41

A1+

A2-

14

34

24

44

12

32

22

42

11

31

21

41

A1-

A2+

– 18 –

– 19 –

Accessories

Jumpers

Pluggable Relays

Relay Sockets

Description - for use with 859 & 857 relays Item Number

Push-in type jumper bars, light gray, insulated, 18 A

2-way 859-402*3-way 859-4034-way 859-4045-way 859-4056-way 859-4067-way 859-4078-way 859-4089-way 859-409

10-way 859-410

Item no. suffix for colored push-in type jumper bars

yellow ... /000-029red ... /000-005blue ... /000-006

Pluggable PCB style relays12 VDC 857-15024 VDC 857-152 24 VDC 857-153*48 VDC 857-154

The 60 VDC replacement relays must be used with 60 VDC, 110 VDC, 220 VDC and 115 VAC/VDC, 230 VAC/VDC relay modules. 60 VDC 857-155 60 VDC 857-157*

Pluggable PCB style optocouplers

24 VDC 857-161 0 ... 24 VAC24 VDC 857-164 0 ... 28 VDC24 VDC 857-167 24 ... 240 VAC60 VDC 857-162 35 ... 72 VDC60 VDC 857-165 52 ... 72 VDC60 VDC 857-168 24 ... 240 VAC

Pluggable “Ice Cube“ style relays

12 VDC 858-150 24 VAC 858-154230 VAC 858-151

24 VDC 858-152* 230 VAC 858-153*

*With gold plated contacts

*Can be used for 788 load side

Description VN Item Number VN Item Number

Pluggable PCB style relays

SPDT (1 C/O) DPDT (2 C/O)12 VDC 788-150 12 VDC 788-15224 VDC 788-154 24 VDC 788-15648 VDC 788-158 48 VDC 788-16060 VDC 788-162 60 VDC 788-164110 VDC 788-166 110 VDC 788-16824 VAC 788-170 24 VAC 788-172115 VAC 788-174 115 VAC 788-176230 VAC 788-178 230 VAC 788-18012 VDC 788-155* 12 VDC 788-157*115 VAC 788-175* 115 VAC 788-177*230 VAC 788-179* 230 VAC 788-181*

Description Item NumberSocket without relay, for DIN 35 Relay height 15 mm, SPDT (1 C/O) 788-100

Relay height 15 mm, DPDT (2 C/O) 788-102

Relay Socket with “Ice Cube“ for DIN - rail 858-100

Description - for use with 788 relays Item Number

Push-in jumper bar, I max. 18 A (module/module)

2-way 788-1133-way 788-1144-way 788-1156-way 788-1168-way 788-117


Push-in type jumper bar 858-402

Description Item NumberSocket for pluggable PCB style relays or optocouplers, 24 VAC/VDC for DIN - rail 857-104

Socket for pluggable PCB style relays or optocouplers, 110 VAC/VDC for DIN - rail 857-107

Socket for pluggable PCB style relays or optocouplers, 230 VAC/VDC for DIN - rail 857-108

– 19 –

– 20 –

286 SeriesPluggable Module with Relays or Optocouplers for Terminal Blocks

With pluggable modules for terminal blocks, 286 Series relays and optocouplers maximize flexibility while simplifying maintenance. This intelligent design saves space and reduces wiring costs.

Vibration-proof - fast - maintenance-freeCAGE CLAMP® handling for all types of conductors


– 20 –

– 21 –

• Easy replacement

• Familiar rail-mount terminal block installation

• LED indication

• Available function modules such as: fuse modules, diode gate modules, and fault indicator modules

• Marking options


Contact Factory

– 21 –

– 22 –

286 SeriesPluggable Modules with Relays for Terminal Blocks





Relay with 1 make contact(10 mm width)

286-364 286-365 286-366 286-564 286-566 286-567

24 VDC 48 VDC 60 VDC 24 VAC 115 VAC 230 VAC

250 VAC 5 A r1

Relay with 1 break contact(10 mm width)

286-368 286-369 286-370 286-568

24 VDC 48 VDC 60 VDC 24 VAC

250 VAC 5 A r1

Relay with SPDT (1 C/O)(15 mm width)

286-302 286-303 286-304 286-305 286-306 286-307 286-308

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 115 VDC 220 VDC

250 VAC 7 A 1

Relay with SPDT (1 C/O)(15 mm width)

286-502 286-503 286-504 286-505 286-506 286-507 286-508

5/6 VAC/VDC 12 VAC/VDC 24 VAC/VDC 48 VAC/VDC 60 VAC/VDC

115 VAC 230 VAC

250 VAC 7 A 1

Relay with SPDT (1 C/O),with gold contacts(15 mm width)

286-394 286-395 286-594

24 VDC 48 VDC

24 VAC/VDC 250 VAC* 1 A* 1

Relay with DPDT (2 C/O)(20 mm width)

286-310 286-311 286-312 286-313 286-314 286-315 286-316

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 115 VDC 220 VDC

250 VAC 7 A r1

Relay with DPDT (2 C/O)(20 mm width)

286-510 286-511 286-512 286-513 286-514 286-515 286-516

5/6 VAC 12 VAC 24 VAC 48 VAC 60 VAC 115 VAC 230 VAC

250 VAC 7 A r1

Relay with 1 break contact and 1 make contact(20 mm width)

286-318 286-319 286-320 286-321 286-322 286-324 286-520

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC

220 VDC 24 VAC

250 VAC 6 A r1

Relay with 2 make contacts(20 mm width)

286-326 286-327 286-328 286-329 286-330 286-332

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC

220 VDC

250 VAC 6 A 1


A1 ~

A2 ~

13

14

13

14

A1 +

A2 –

A1 +

A2 –A2 – 14

12

11

1412

11

A1 ~

A2 ~

A2 ~

A1 +

A2 –A2 – 14

12

11

1421

22

11

24

12

A1 ~

A2 ~

11

12

11

12

A1 ~

A2 ~

A1 +

A2 –

A2 ~

A2 ~

A1 ~

1412

11

A1 +

A2 –

1421

22

11

24

12

14

1213

11A1 +

A2 –

A1 +

A2 – 14

1213

11A1 ~

A2 ~A2 ~

A1 ~

A1 +

A2 –

1423

24

13

A2 –

A1 +

– 22 –

– 23 –

Pluggable Modules with Relays for Terminal Blocks





Relays with 2 break contacts and 2 make contacts(25 mm width)

286-334 286-335 286-336 286-337 286-338 286-339 286-536 286-540

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 115 VDC 24 VAC

230 VAC

250 VAC 5 A 1

Relays with 1 break contact and 3 make contacts(25 mm width)

286-342 286-343 286-344 286-345 286-346 286-347 286-544 286-547 286-548

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 115 VDC 24 VAC 115 VAC 230 VAC

250 VAC 5 A 1

Relays with 4 make contacts(25 mm width)

286-350 286-351 286-352 286-353 286-354 286-355 286-552 286-555 286-556

5/6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 115 VDC 24 VAC 115 VAC 230 VAC

250 VAC 5 A 1

Relay with 4PDT (4 C/O)(35 mm width)

286-375 286-578 286-579

24 VDC 110/120 VAC

230 VAC250 VAC 4 A 1

Relays with 1 make contact, for switching large DC loads(15 mm width)

286-376 24 VDC 250 VAC 5 A 1

Relay with DPDT (2 C/O), with gold contacts(20 mm width)

286-384 24 VDC 250 VAC* 5 A* 1

Impulse switch with 1 break contact and 1 make contact(15 mm width)

286-573 24 VDC

250 VAC 5 A 1286-574 230 VAC

Bistable relay with SPDT (1 C/O), PNP/negative switching(15 mm width)

286-380 286-381

24 VDC 24 VDC 250 VAC 6 A 1


23

24

1421

22

13

12 11A1 +

A2 –

A2 ~

A1 ~

12 11

1421

22

13

23

24

14

1111

A2 –

A1 +

A2 –

23

24

1421

22

13

12 11A1 +

A2 –

A2 ~

A1 ~

12 11

1421

22

13

23

24

A1 +A2 –

121114

44

22212442

41

323134

1421

22

11

24

12

A1 +

A2 –

A2 +

A3 _

11

14

12A1 +

A1 _

A2 _

A3 +

1412

11

A1+

A2-

A2-

141211

A1~

A2~

A2~

14

1211

– 23 –

– 24 –

286 SeriesPluggable Modules with Relays for Terminal Blocks





Relay with 1 make contact, with an extended input voltage and temperature range(10 mm width)

286-364 /004-000 24 VDC 250 VAC 3 A 1

Relay with 1 break contact, with an extended input voltage andtemperature range(10 mm width)

286-368/004-000 24 VDC 250 VAC 3 A 1

Relay with SPDT (1 C/O), with an extended input voltage and temperature range(15 mm width)

286-304/004-000

24 VDC 110 VDC 250 VAC 3 A 1

Relay with SPDT (1 C/O), with an extended input voltage and temperature range(15 mm width)

286-307/004-000 24 VDC 250 VAC* 3 A* 1

Relay with SPDT (1 C/O), with gold contacts with an extended input voltage and temperature range(15 mm width)

286-394/004-000 24 VDC 250 VAC 4 A 1

Relay with DPDT (2 C/O), with an extended input voltage and temperature range(20 mm width)

286-312/004-000 24 VDC 250 VAC 4 A 1

Relay with 1 break and 1 make contact, with an extended input voltage and temperature range(20 mm width)

286-320/004-000 24 VDC 250 VAC 4 A 1

Relay with 2 make contacts, with an extended input voltage and temperature range(20 mm width)

286-328/004-000 24 VDC 250 VAC 4 A 1

Relay with 2 break contacts and 2 make contacts with an extended input voltage and temperature range(25 mm width)

286-336/001-000 24 VDC 250 VAC 4 A 1

Relay with 1 break contact and 3 make contacts with an extended input voltage and temperature range(25 mm width)

286-344/004-000 24 VDC 250 VAC 4 A 1


A1 ~

A2 ~

13

14

13

14

A1 +

A2 –

A1 +

A2 –A2 – 14

12

11

14

1213

11A1 +

A2 –

A1 +

A2 – 14

1213

11A1 ~

A2 ~A2 ~

A1 ~

23

24

1421

22

13

12 11A1 +

A2 –

A2 ~

A1 ~

12 11

1421

22

13

23

24

11

12

11

12

A1 ~

A2 ~

A1 +

A2 –

A1 +

A2 –

1421

22

11

24

12

A1 +

A2 –

1423

24

13

A2 –

A1 +

23

24

1421

22

13

12 11A1 +

A2 –

A2 ~

A1 ~

12 11

1421

22

13

23

24

23

24

1421

22

13

12 11A1 +

A2 –

A2 ~

A1 ~

12 11

1421

22

13

23

24

– 24 –

– 25 –

Pluggable Modules with Optocouplers for Terminal Blocks





Optocoupler, positive switching(15 mm width)

286-750 286-751 286-752

24 VDC3 ... 6 VDC

10 ... 20 VDC 20 ... 30 VDC

500 mA 1


286-754 286-756 286-758

230 VAC3.5 ... 7 VDC 10 ... 20 VDC 20 ... 30 VDC

500 mA 1

Optocoupler, negative switching(15 mm width)

286-720 24 VDC 15 ... 40 VDC 2 A 1

286-721 24 VDC 15 ... 40 VDC 5 A 1


286-752/002-000 5 VDC 20 ... 30 VDC 500 mA 1

Optocoupler, positive switching(15 mm width) 286-723 24 VDC 20 ... 30 VDC 4 A 1

Optocoupler, negative switching(15 mm width)

286-726 286-728 286-730

5 VDC 12 VDC 24 VDC

99 ... 121 VDC 1.6 A 1

Optocoupler(15 mm width)

286-732 286-733 286-734

5 VDC 12 VDC 24 VDC

24 ... 280 VAC 1 A 1

Optocoupler(10 mm width) 286-791 24 VDC 20 ... 60 VDC 100 mA 1

Optocoupler(10 mm width) 286-794 24 VDC 20 ... 60 VDC 100 mA 1

Double-optocouplers (20 mm width) 286-792 2 x 24 VDC 2 x 20 ... 30

VDC2 x 250 mA 1

Optocoupler with 2-inverted outputs(20 mm width) 286-790 24 VDC 20 ... 30 VDC 500 mA 1

RL

1+

3

2–

A1+

A2–

A2–

RL

1+

3

2–

A1 ~

A2 ~

A2 ~

RL

1+

3

2–

A1+

A2–

A2–

~RL

1

2

2

A1+

A2–

A2–

~~

~

Null

span

nung

ssch

alte

r

RL

1+

2–

A1 +

A2 –

RL

1+

2–

A1 +

A2 –

RL

RL

A1 +

A2 –

A2 –A1 +

1+2–3+4–

1+

A1+

A2–

A1+

A2–

RL1

RL2

2–

RL

1+

3

2–

A1+

A2–

A2–

RL

1+

3

2–

A1+

A2–

A2–

RL

1+

3

2–

A1+

A2–

A2–

RL

1+

3

2–

A1+

A2–

A2–

– 25 –

– 26 –

288 SeriesOpen Style PCB Carrier with Soldered PCB Relays or Sockets

With relay and PLC Interface modules mounted on DIN-rail mount carriers, 288 Series relays provide fast and easy peripheral signal connections. The fully wired modules provide direct, in-the-field switching of actuators and other coupling elements.

Vibration-proof - fast - maintenance-freeCAGE CLAMP® handling for all types of conductors


– 26 –

– 27 –

Open Style PCB Carrier with Soldered PCB Relays or Sockets

• Reverse voltage protection diodes

• Modules with up to 16 relay functions

• LED indication

• Pluggable relays


Contact Factory

– 27 –

– 28 –

288 SeriesOpen PCB Carriers with Soldered PCB Relays





Relay with 1 make contact, relay pre-soldered onto mounting carrier

288-364 288-564 288-565 288-567

24 VDC 24 VAC/VDC 48 VAC/VDC 115 VAC/VDC

250 VAC 5 A 1

Relay with 1 break contact, relay pre-soldered onto mounting carrier

288-368 288-568

24 VDC 24 VAC/VDC 250 VAC 5 A

Relay with SPDT (1 C/O), relay pre-soldered onto mounting carrier, with connectors

288-554 24 VAC/VDC 250 VAC 5 A 1

Relay with SPDT (1 C/O), relay pre-soldered onto mounting carrier

288-304 288-504 288-508

24 VDC 24 VAC/VDC

230 VAC250 VAC 6 A 1

Relay with DPDT (2 C/O), relay pre-soldered onto mounting carrier

288-312 288-512

24 VDC 24 VAC/VDC 250 VAC 6 A 1

Relay with 1 make contact, relay pre-soldered onto mounting carrier, designed for switching high inrush current loads (e.g., filament lamp loads)

288-320 24 VDC 250 VAC 16 A r

Bistable relay with SPDT (1 C/O), relay pre-soldered onto mounting carrier

288-380 24 VDC 250 VAC 6 A

A1 +

A2 –

1424

21

11

22

12

A1 ~

A2

1424

21

11

22

12

A2 ~

A1 +

A2 –

14

13

A1 ~ 14

13A2 ~

A1 +

A2 –

14

13A2 –

A2 ~

12

11

14

11

A1 ~

A1 +

A2 –

12

11

A1 ~ 12

11A2 ~

A2 +

B1 _

11

14

12A1 +

A1 ~

A2 ~A2 ~

A1 +

A2 –

1114

12

A2 – 11

14

12

– 28 –

– 29 –

Open PCB Carriers with Soldered PCB Relays with Force Guided Contacts





Relay with DPDT (2 C/O), with force-guided contacts, relay pre-soldered onto mounting carrier

288-437 24 VDC 250 VAC 5 A 1

2 safety relays, Hengstler H-462 type, with 3 make contacts and 1 break contact, pluggable relays pre-installed into mounting carrier

288-435 24 VDC 250 VAC 6 A 1

Safety relay, SDS SF 4 type, with 4 break contacts and 4 make contacts, 1 module, relay pre-soldered onto mounting carrier

288-412 288-413 288-414 288-415 288-416 288-418

5 VDC 12 VDC

24 VAC/VDC 48 VAC/VDC 60 VAC/VDC

230 VAC/VDC

250 VAC 6 A 1

1412

11

2422

21

A2 –

A1 +

A2 –

A2 +

_ 12 443424

11 43332312 443424

11 433323A1 +

_

– 29 –

– 30 –

789 Series17 mm Wide Enclosed Style PCB Carrier with Soldered PCB Relays

With up to four make contacts with or without manual operation, 789 Series relays serve a wide variety of applications from basic lighting control to comprehensive industrial control cabinets. The 17.5 mm wide DIN-rail mount enclosure is ideal for distribution boards and meter cabinets. Vibration-proof - fast - maintenance-free

CAGE CLAMP® handling for all types of conductors


– 30 –

– 31 –

17 mm Wide Enclosed Style PCB Carrier with Soldered PCB Relays


• LED indication

• Clearly identified connection ports

• Marking options


Contact Factory

– 31 –

– 32 –





Relay with SPDT (1 C/O) 789-304 24 VDC 250 VAC 12 A 1

Relay with SPDT (1 C/O) 789-504 789-508

24 VAC/VDC 230 VAC 250 VAC 12 A

Relay with DPDT (2 C/O)789-312 789-313 789-315

24 VDC 48 VDC 110 VDC

250 VAC 8 A 1

Relay with DPDT (2 C/O)789-512 789-515 789-516

24 VAC/VDC 115 VAC 230 VAC

250 VAC 8 A

Relay with 2 break contacts, 2 make contacts 789-336 24 VDC 250 VAC 4 A

Relay with 2 break contacts, 2 make contacts

789-535 789-536

12 VAC/VDC 24 VAC/VDC 250 VAC 4 A 1

Relay with 4 make contacts 789-352 24 VDC 250 VAC 4 A

Relay with 4 make contacts 789-551 789-552

12 VAC/VDC 24 VAC/VDC 250 VAC 4 A

Latching relay with 1 make contact 789-571 24 VDC 250 VAC 16 A

Latching relay with 1 make contact 789-570 230 VAC 250 VAC 16 A 1

Relay with 1 make contact, Manual/0FF/Auto switch

789-323

24 VDC 250 VAC 16 A 101

A3+

n.c.B2

(+24V)

14

13 13

A2-

A2-

A1+

B1

A A = Automatik (AUTO)0 = AUS1 = Manuell EIN (MAN)

789-325

Relay with SPDT (1 C/O) and manual operation

11

1214

A1 +

A2 –

789-1341 24 VDC 250 VAC 12 A

Relay with SPDT (1 C/O) and manual operation

11

1214

A1 ~

A2 ~

789-1544 230 VAC 250 VAC 12 A

789 Series17 mm Wide Enclosed PCB Carriers with Soldered PCB Relays

11

12

14

A2 –

A1 +

A2 –

A2 ~

A1 ~

A2 ~

11

12

14

A1 +

A2 –A2 –

14 24 34 44

13 23 33 43

14 24 34 44

13 23 33 43A2 ~

A1 ~

A2 ~

A1 +

A2 – 13

14

A1 ~

A2 ~13

14

14

13 13A2-

A2-

A1+

A A = Automatisk0 = OFF1 =

01

A3+(+24V)

Manuell PA

A1 +

A2 –A2 – 11

24

1412

22

21

14 24 12 22

13 23 11 21A2 –

A1 +

A2 –

A2 ~

A1 ~

A2 ~ 11

24

1412

22

21

A1 ~

A2 ~A2 ~

14 24 12 22

13 23 11 21

– 32 –

– 33 –

17 mm Wide Enclosed PCB Carriers with Soldered PCB RelaysAccessories

Terminal Blocks for 286 SeriesDescription Item Number

Terminal block for pluggable modules - for use with 10 mm wide moduleswith 2-conductor terminal blocks, orange separator 12 mm / 0.472 in wide 280-618with 4-conductor terminal blocks, orange separator 12 mm / 0.472 in wide 280-608with 4-conductor terminal blocks, marker plate 15 mm / 0.591 in wide 280-762Terminal block for pluggable modules - for use with 15 mm wide moduleswith 2-conductor terminal blocks, orange separator 17 mm / 0.669 in wide 280-619with 4-conductor terminal blocks, orange separator 17 mm / 0.669 in wide 280-609with 4-conductor terminal blocks, marker plate 20 mm / 0.787 in wide 280-763Terminal block for pluggable modules - for use with 20 mm wide moduleswith 2-conductor terminal blocks, orange separator 22 mm / 0.866 in wide 280-638with 4-conductor terminal blocks, orange separator 22 mm / 0.866 in wide 280-628with 4-conductor terminal blocks, marker plate 25 mm / 0.984 in wide 280-764Terminal block for pluggable modules - for use with 25 mm wide moduleswith 2-conductor terminal blocks, orange separator 27 mm / 1.063 in wide 280-639with 4-conductor terminal blocks, orange separator 27 mm / 1.063 in wide 280-629with 4-conductor terminal blocks, marker plate 30 mm / 1.181 in wide 280-765Terminal block for pluggable modules - for use with 35 mm wide moduleswith 4-conductor terminal blocks, orange separator 37 mm / 1.457 in wide 280-636Wire range 0.08 mm2 ... 2.5 mm2 / AWG 28 ... 14; Stripped lengths 8 ... 9 mm / 0.33 in

JumpersDescription - for use with 789 relays Item Number

Push-in jumper barsUninsulated, 12-way,

to be cut to the required length

789-112

– 33 –

– 34 –

WAGO Full Line Catalogs

• Rail-Mounted Terminal Blocks• Rail-Mounted Terminal Blocks with Pluggable Connector

(X-COM®-SYSTEM and X-COM®S-SYSTEM)• Patchboard Systems • Terminal Strips• PUSH WIRE® Connectors for Junction Boxes• Lighting Connectors • Shield Connecting System

• Relay and Optocoupler Modules • JUMPFLEX® Signal Conditioners and Isolation Amplifiers• Current and Energy Measurement Technology • EPSITRON® Power Supply System • Interface Modules and System Wiring• Overvoltage Protection • Interface Modules with Specialty Functions• Empty Housings

• PCB Terminal Blocks • SMT PCB Terminal Blocks• MULTI CONNECTION SYSTEM (MCS)• Pluggable PCB Terminal Blocks• Feedthrough Terminal Blocks• Specialty Connectors• Empty Housings

• Software• Operating & Monitoring - PERSPECTO®

• Controllers• Modular I/O-SYSTEM, IP20/IP67• Industrial Switches• Radio Technology, TO-PASS® Telecontrol Technology• IP67 Sensor/Actuator Boxes, IP67 Cables and Connectors

• WINSTA® MINI - Pluggable Connectors • WINSTA® MINI Special - Pluggable Connectors• WINSTA® MIDI - Pluggable Connectors • WINSTA® MIDI Special - Pluggable Connectors • WINSTA® MAXI - Pluggable Connectors • WINSTA® RD - Cable Assemblies • WINSTA® KNX - Pluggable Connectors • WINSTA® IDC - Flat Cable Systems• WINSTA® - Distribution Boxes

Volume 1, Rail-Mounted Terminal Block Systems

Volume 2, PCB Terminal Blocks and Connectors

Volume 5, WINSTA® - The Pluggable Connection System

Volume 3, Automation Technology

Volume 4, Interface Electronic

1

Rail-M

ount

ed T

erm

inal

Blo

ck S

yste

ms

Ful

l Lin

e Ca

talo

g 20

15

0888

-600

1/03

00-6

901

- Rai

l-Mou

nted

Term

inal

Blo

ck S

yste

ms -

201

5 - G

B - 0

1/20

15-0

0 - P

rinte

d in

Ger

man

y - S

ubje

ct to

des

ign

chan

ges

Full Line Catalog, Volume 1Edition: 2015

Rail-Mounted Terminal Block Systems

WAGO Kontakttechnik GmbH & Co. KGPostfach 2880 · D - 32385 MindenHansastraße 27 · D - 32423 MindenGermanyPhone:

+49 571 887 - 0Fax:

+49 571 887 - 169E-Mail:

[email protected]:

www.wago.com

PCB Terminal Blocks and Connectors



Automation Technology


Interface Electronic

WINSTA® The Pluggable Connection System


For More Information on

Relays & Optocouplers

see Volume 4 of the

Full Line Catalog

– 34 –

– 35 –

– 35 –

5126

1590

088

8-08

32/0

000-

0269

Prin

ted

in th

e U

nite

d St

ates

MexicoWAGO CorporationQueretaroTel. 001/800/309/5975 + 52/442/221/5946Fax + 52/442/221/5063 www.wago.mx

WAGO CorporationN120 W19129 Freistadt RoadGermantown, Wisconsin 53022Telephone: 800 / DIN Rail (346-7245)Fax: 262 / [email protected]

CanadaWAGO CorporationTel. 800/DIN Rail (346-7245)Fax 262/255-3232www.wago.ca

Date post:	19-Mar-2018
Category:	Documents
Upload:	dodiep
View:	223 times
Download:	6 times

relays and optocouplers - WAGO · PDF fileWAGO provides a broad range of relays and...

Documents