Release Text Windowz

8/13/2019 Release Text Windowz

1/96

=========================== R E L E A S E N O T E S ===========================

Broadcom Windows Installer Projects Windows XP, Windows Vista, Windows 2003,

Windows 2008, Windows 7, Windows 8

Copyright (c) 2002-2013 Broadcom Corporation All rights reserved. February 6, 2013

Version 3.19.4 (February 6, 2013)---------------------------------

Enhancement: =========== 1. Change: ( Cont00067661 ) Remove card reader icon service from the installer. Impact: Card Reader installer.

Version 3.19.3 (February 1, 2013)----------------------------------

Enhancement: =========== 1. Change: ( Cont00067535 ) Use new Tcl library for CIM. Impact: Management and Umbrella installers.

Version 3.19.2 (January 24, 2013)----------------------------------

Enhancement: =========== 1. Change: ( Cont00065989 ) Block downgrade from T7.6a to any previous installers. Impact: OEM Installer.

Version 3.19.1 (January 17, 2013)----------------------------------

Enhancement: =========== 1. Change: ( Cont00067358 ) Need a new OEM Installer for T15.6a. Impact: OEM, NX1 Drivers and Card Reader Installers.

Version 3.19.0 (January 07, 2013)----------------------------------


2/96


3/96

=========== 1. Change: ( Cont00065904 ) Need a new OEM installer for T7.4GU. Impact: OEM, NX2 Driver and Management Installers.

Version 3.17.14 (September 10, 2012)------------------------------

Fixes: ===== 1. Problem: ( Cont00065523 ) The driver cannot be installed by the installer on WinXP SP2. Cause: Separate installer project was used for IOAC only. Change:

Merge IOAC components into regular driver installer project. Impact: NX1 and Netlink Driver Installers.

Version 3.17.13 (September 6, 2012)------------------------------

Enhancement: =========== 1. Change:

File changes for Win Diag driver. Impact: BSkinnyDrvInstaller

Version 3.17.12 (August 30, 2012)------------------------------

Enhancement:

=========== 1. Change:Update localized message strings.

Impact: NX1 Driver, Netlink Driver, NX1 IOAC, Netlink IOAC,

Management and Umbrella DTM Installers

Version 3.17.11 (August 20, 2012)------------------------------

Fixes: =====

1. Problem: ( Cont00065242 ) CardReader installer v15.4.5.1: xD change various types of

memory cards will display incorrect icon. Cause: Card reader service does not get the eject event when card is removed immediately after it is inserted, which leaves registry behind. When the next card is inserted and card reader service

gets the insert event, it does not overwrite existing registry which contains old data. Change:


4/96

Always overwrite registry when card is inserted. Impact: BDrvCardReader Installer.

Version 3.17.10 (August 17, 2012)------------------------------

Fixes: ===== 1. Problem: ( Cont00065214 ) CardReader installer:v15.4.5.1 reboot system will lost

icon in Win8. Cause: Card reader service did not set registry on service startup. Change:

Detect registry on service startup. Impact: BDrvCardReader Installer.

2. Problem: ( Cont00065215 ) CardReader installer:v15.4.5.1 Silent install will display

error message. Cause:

ADDSOURCE property from silent install command does not includehidden feature for card reader service, so binary was not insta

lled. Change:

Append hidden feature to ADDSOURCE property. Impact: BDrvCardReader Installer.

3. Problem: ( Cont00065216 ) [CR installer v15.4.5.1] The custom icon no longer display on

MMC & xD card insertion on Win7. Cause:

ProductID field from new SD/MMC & XD drivers was changed, requiringinstaller to update registry.

Change:Update registry accordingly.

Impact: BDrvCardReader Installer.

Version 3.17.9 (August 15, 2012)------------------------------

Fixes:

===== 1. Problem: ( Cont00065169 ) IOAC registry was not created. Cause: Registry value was written to the wrong location. Change:

Write registry to the correct location. Impact: B57IOAC and K57IOAC installers.


5/96

Version 3.17.8 (August 13, 2012)------------------------------

Enhancement: =========== 1. Change: ( Cont00064298 ) Skip checking NCU for OEM test installer. Impact: NX2 Driver Installer

Fixes: ===== 1. Problem: ( Cont00063133 ) Custom icons for card reader is no longer loaded on Windows 8.

Cause: Windows 8 looks for different registry for custom icon. Change:

Install service on Windows 8 to set custom icon registry.Impact:

BDrvCardReader Installer.

Version 3.17.7 (July 25, 2012)------------------------------

Fixes: ===== 1. Problem: ( Cont00064860 ) BASP and WMI are not installed if using setup /s /v/qn

or brcmsetup /s /v"/qn NO_DRIVER=Y FRESHINSTALL=true".

Cause: Test for Hyper-V guest is not being called when running the installer from command line. Change:

In command line mode, test for Hyper-V guest is called.Impact: All Installers.

Version 3.17.6 (July 24, 2012)------------------------------

Enhancement: =========== 1. Change: ( Cont00064630 ) Install VC2010 redistribution package. Impact:

Management and Umbrella Installers

Fixes: ===== 1. Problem: ( Cont00063471 ) Block MgmtApps/Umbrella installer from

installing WMI Provider/BASP on Hyper-V guests.

Cause: Added only in Management Installer and not all


6/96

installers Change:

Block WMI Provider/BASP on Herper-V guests forall installers.

Impact: All Installers.

2. Problem: ( Cont00064535 ) BACS icon is not removed from Control Panel after

uninstalling UmbrellaDTM installer.

Cause: Path for delete file is not set correctly. Change:

Fixed path for delete file. Impact: Management and Umbrella Installers.

Version 3.17.5 (July 13, 2012)------------------------------ Enhancement: =========== 1. Change: ( Cont00063471 )

Block MgmtApps/Umbrella installer frominstalling WMI Provider/BASP on Hyper-V guests. Impact: Management Installer

Fixes: ===== 1. Problem: ( Cont00064188 ) User setting is not removed after uninstall BACS. Cause: Did not remove persistent files. Change:

Remove persistent files.

Impact: Management Installer.

2. Problem: ( Cont00064377 ) Hide Dash management console portion of BACS.

Cause: For all OEM installers this is enabled by default.

Change:Enabled Dash Management for specific OEMs.


Version 3.17.4 (June 11, 2012)------------------------------ Fixes: ===== 1. Problem: ( Cont00063753 ) Add OEM target to NX2 Driver Installer. Cause: OEM target is not included earlier. Change:

Added OEM target.


7/96

Impact: NX2 Driver Installer.

Version 3.17.3 (May 31, 2012)----------------------------- Fixes: ===== 1. Problem: ( Cont00063522 ) Unable to create team from a fresh install

of v15.4.2.2 installers. Cause: A new file is required by basp driver that is not included. Change:

Added the new file. Impact: Management Installer.

Version 3.17.2 (May 22, 2012)----------------------------- Enhancement: ===========

1. Change: ( Cont00063387 ) Remove Co-installer from installer.Impact:

NX2 Installer.

Version 3.17.1 (May 04, 2012)----------------------------- Enhancement: =========== 1. Change: ( Cont00063041 ) Add Win 8 support to NX2 drivers.

Impact:

NX2 Installer.

Version 3.17.0 (April 11, 2012)------------------------------- Enhancement: =========== 1. Change: ( Cont00062403 ) NX1 and Management Installers need Win 8 support

Impact: NX1 and Management Installer.

Version 3.16.4 (March 9, 2012)------------------------------ Fixes: ===== 1. Problem: ( Cont00061633 ) The UART driver needs to be included in driver installer from our generic desktop software release. Cause: Files only copied for certain OEMs. Change:


8/96

Copy files for all the OEMs. Impact: UART drivers for NX1 Driver Installer.

2. Problem:When installing Management Installer on top of umbrella, theabort dialog shows blank message.

Cause: Message was not set properly. Change:

Fixed setting message. Impact: Management Installer.

Version 3.16.3 (March 1, 2012)------------------------------ Enhancement: =========== 1. Change: ( Cont00061836 ) Block T7.2 & 15.2 installation if OS is Win8 or greater.

Impact: All.

Version 3.16.2 (Feb 16, 2012)---------------------------- Fixes: ===== 1. Problem: ( Cont00061633 ) The UART driver needs to be included in driver installer from our generic desktop software release. Cause: Not included for all OEMs. Change:

Including for all the OEMs. Impact:

UART drivers for NX1 Driver Installer.

Version 3.16.1 (Jan 2, 2012)---------------------------- Enhancement: =========== 1. Change: ( Cont00060666 ) Create a new driver installer that upgrades/downgrades to/from

T7.2/T7.0 with W2K3 support. Impact: NX2 Driver and Management Installer.

Version 3.16.0 (Dec 7, 2011)---------------------------- Enhancement: =========== 1. Change:

Moved AsfEnabled from BACS to CIM Provider. Impact: Management Installer.


9/96

Version 3.15.13 (Nov 30, 2011)------------------------------ Fixes: ===== 1. Problem: ( Cont00060009 ) iSCSI drivers should not be installed on W2K3 OS. Cause: It is being installed. Change:

On W2K3 OS, removed installation of iSCSI drivers. Impact: NX2 Drivers for a specific OEM.

Version 3.15.12 (Oct 25, 2011)------------------------------ Fixes: ===== 1. Problem: ( Cont00059402 ) Missing readme.txt from installer. Cause: File was removed by mistake. Change:

Add the readme.txt back. Impact: Management Installers.

2. Problem: ( Cont00059403 ) Upgrade from T6.4 to T7.0 installer failed. Cause: T7.0 installer product code was blocked

by mistake. Change:

Change product code for T7.0 Installers. Impact: Umbrella, NX2 Driver and Management Installers.

Version 3.15.11 (Oct 12, 2011)----------------------------- Enhancement: =========== 1. Change: ( Cont00059223 ) Update all installers to install basp6 in MSFT SBS 2011. Impact: All OEM Installers.

Version 3.15.10 (Sep 08, 2011)------------------------------ Fixes: ===== 1. Problem: ( Cont00058376 ) OEM Combined driver plus management installer. Cause: Creating unwanted registry keys. Change:

Removed the registry keys that are not


10/96

needed. Impact: Driver and Management Installer.

2. Problem: ( Cont00058427 ) The Help/Update Info Link and Contact displayed in Program and Features are incurrect. Cause: OEM support url is not displayed correctly. Change:

Correct OEM support url is dsiplayed. Impact: OEM Installer.

Version 3.15.9 (Sep 07, 2011)----------------------------- Enhancement: =========== 1. Change: ( Cont00058262 ) Update all installers to install basp6 in MSFT SBS 2011. Impact: All.

Fixes: ===== 1. Problem: ( Cont00058325 ) Modify Error Message when BACS installer is blocked in 2k3. Cause: Error Message was not updated. Change:

Updated the Error Message. Impact: Management Installer.

Version 3.15.8 (Aug 11, 2011)----------------------------- Enhancement: =========== 1. Change:

Change iSCSI and FCoE crashdump drivers name to use same name across platform. Impact: Umbrella, Umbrella DTM, NetXtreme and

NetXtremeII Driver Installers.

Version 3.15.7 (Aug 05, 2011)----------------------------- Enhancement: =========== 1. Change: ( Cont00057370 ) SW DUP installed on a non-supported OS.

Added build flag to remove Windows 2003 support.

Impact: All.


11/96

2. Change:Remove Windows 2000 support.

Impact: All.

Fixes: ===== 1. Problem: ( Cont00055966 ) Improper Diag driver version displayed in Device Manager. Cause: Device Manager is not picking the latest version of Diag driver. Change:

Uninstalled the previous version of Diag driver and installed the new version.

Impact: Driver Installer

Version 3.15.6 (July 20, 2011)----------------------------- Fixes:

===== 1. Problem: ( Cont00056516 ) Installing Umbrella Packages causes finger print device

to stop working. Cause: Installer is removing HKLM\\SOFTWARE\\Broadcom key.

Change:Not removing the above mentioned key.

Impact: OEM DTM Installer.

Version 3.15.6 (July 18, 2011)-----------------------------

Enhancement: =========== 1. Change: ( Cont00054204 ) Block downgrade from T7.0.

Impact: Driver and Management installers.

Version 3.15.5 (June 17, 2011)----------------------------- Enhancement: =========== 1. Change:

Add UK English, HK Chinese, and Portuguese to installer. Impact: Umbrella, Management, and NX1 Driver Installers.

Version 3.15.4 (June 10, 2011)----------------------------- Fixes: =====


12/96

1. Problem: ( Cont00056140 ) Uninstall broken in all OS's causing evbd

yellow bangs. Cause: Previous fix for Cont00055847 was causing

problem in uninstallation. Change:

Corrected fix for Cont00055847. Impact: Umbrella Installer

Version 3.15.3 (June 7, 2011)----------------------------- Enhancement: =========== 1. Change: ( Cont00055737 ) Modify driver installer to block downgrade

to T6.2 or previous releases. Impact: Driver and umbrella installers.

2. Change: ( Cont00055738 ) Modify management apps installer to block

downgrade to T6.2 or previous versions. Impact: BACS Installer.

3. Change:Update BACS4 resources.


Fixes: ===== 1. Problem: ( Cont00055780 ) Install driver and application silent command

output issue. Cause: Left over debug trace. Change:

Removed debug trace. Impact: Umbrella Installer.

2. Problem: ( Cont00055796 ) Umbrella Installer: GUI installation does not select

Management and CIM as default. Cause: Previous fix for Cont00054563 disables BACS and CIM

by default. Change:

Set BACS and CIM to be installed by default, andchanged syntax of silent install driver only so thatBACS and CIM will not be installed. Refer to Silent.txtfor installing driver only.

Impact: Umbrella Installer.

3. Problem: ( Cont00055805 )


13/96

The Basp Virtual adapter remains after uninstallationis complete.

Cause: BASP uninstaller was not installed for w2k3 32-bit. Change:

Added file to installer. Impact: Umbrella Installer / Management Installer.

4. Problem: ( Cont00054563 ) T6.4 Umbrella Installer - Silent Install Drivers Only

will install Mgmt Apps as well. Cause: Condition was not set properly. Change:

Fixed condition. Impact: Umbrella Installer

5. Problem:Popup occurred when installing drivers in Win 2003.

Cause: FCoE driver is being installed, but it is not

supported in Windows 2003.

Change: Do not install FCoE driver in Windows 2003. Impact: Umbrella Installer / NetXtreme II Driver Installer

6. Problem: ( Cont00054001 ) "driver update installed successfully", is a

Misleading DUP update message on an unsupportedsystem configuration.

Cause: Return code from setup.exe is not returned by MUP. Change:

Changed MUP to return code from setup.exe.

Impact: Umbrella Installer

7. Problem: ( Cont00055847 ) Silent Installer Applications only will install

Drivers as well on OEM board w/ NPAR. Cause: Driver components were still being installed. Change:

Set driver components to install conditionally. Impact: Umbrella Installer

Version 3.15.2 (May 18, 2011)----------------------------- Fixes: ===== 1. Problem: ( Cont00054868 ) BACS 4 still installed after uninstall. Cause: BACS Component was not set up correctly. Change:


14/96

Fixed BACS Component. Impact: BACS Installer, Umbrella Installer.

2. Problem: ( Cont00054615 ) BACS installer: CIM Provider and BASP are

not selected by default. Cause: Install level was not set correctly. Change:

Fixed install level. Impact: BACS Installer.

Version 3.15.1 (April 01, 2011)-------------------------------- Enhancement: =========== 1. Change:

Synchronized BACS files according to the latest requirement. Impact: Management and OEM Installers.

2. Change:Changed components hierarchy to reflect the remote

management for BACS4. Impact: Management and OEM Installers.

3. Change:Install BACS and CIM by default.

Impact: OEM Installer.

Fixes:

===== 1. Problem: ( Cont00052915 ) SilentMgmtApps.txt file in BACS GUI installer

folder says BACS3 instead of BACS4. Cause: Silent.txt did not get updated to BACS 4. Change:

Update silent.txt to BACS 4 references. Impact: Management Installer.

Version 3.15.0 (March 02, 2011)--------------------------------

Enhancement: =========== 1. Change: ( Cont00053233 ) Create new umbrella installer project

Impact: New OEM Installer

Version 3.14.43 (February 18, 2011)-----------------------------------


15/96


Added FCoE Crash Dump. Impact: NetXtreme II and OEM Installers.

Fixes: ===== 1. Problem: ( Cont00052945 ) Installer doesn't have BACS4 on control panel. Cause: Control panel file did not get copied into the correct location. Change:

Copy the correct control panel file. Impact: Management and OEM Installers.

Version 3.14.42 (February 11, 2011)----------------------------------- Fixes: =====

1. Problem: ( Cont00052769 ) File remains in broadcom folder after uninstallation. Cause: Some BACS generated settings files are not properly cleaned up. Change:

Clean up all remaining files during uninstall. Impact: Management and OEM Installers.

2. Problem: ( Cont00052770 ) Silent uninstall string command is not funtional

in removing drivers.

Cause: Silent.txt did not reflect the correct ID. Change:

Modify Silent.txt. Impact: NetXtreme II and OEM Installers.

3. Problem: ( Cont00052779 ) OEM Installation problem. Cause: Utility file was not updated properly. Change:

Update the utility file.


Version 3.14.41 (February 4, 2011)---------------------------------- Enhancement: =========== 1. Change:

Added BACS4 Control Panel and BACSTray.


16/96

Impact: Management and OEM Installers.

Fixes: ===== 1. Problem: ( Cont00052718 ) BACS4 is showing Broadcom Advanced Control Suite 3

in the comments field of windowsControl Panel. Cause: Some installer not text are not updated to reflect BACS4. Change:

Changed window text string. Impact: Management Installer.

Version 3.14.40 (January 31, 2011)---------------------------------- Enhancement: =========== 1. Change: ( Cont00052218 ) Remove the enable and disable of MS TCP

Chimney during install. Impact:

NetXtreme II and OEM Installer.2. Change:

Modify installer to support BACS4 project. Impact: Management and OEM Installers.

3. Change:Modify installer to support FCoE drivers

Impact: NetXtreme II and OEM Installer.

4. Change:

Enable upgrade path from T6.2 installers. Impact: Management, NetXtreme II and OEM Installers.

Fixes: ===== 1. Problem: ( Cont00051942 ) Incorrect language/options are displaying when installer

encounters an error. Cause: The string was not applicable to the current window

due to changes in the installation GUI. Change:

Changed window text string. Impact: NetXtreme II Installer.

Version 3.14.29 (January 28, 2011)---------------------------------- Enhancement: =========== 1. Change:


17/96


18/96

Cause: The installer did not include the files.

Change:Files are added to the installer and the files are being copied

in the program files directory.

Created a shortcut to run b57wdiag.exe Impact: Diagnostics Installer

Version 3.14.24 (December 21, 2010)----------------------------------

Fixes: ===== 1. Problem: ( Cont00051848 ) OEM files: directory with space character is not

processed correctly. Cause: The application did not take the white space charcter properly. Change:

Fixed the application to take the white space character.

Impact: OEM Installers.


Fixes: ===== 1. Problem: ( Cont00051258 ) Windows Installer: event viewer report SNMP error

message after completion of installer. Cause: The SNMP restart service was out of sync. Change:

Sync up the SNMP service time. Impact: Management and OEM Installers.


Fixes: ===== 1. Problem:

Skinny Driver Installer not workingCause:

Not able to find INF file. Install Sequence was incorrect and files were not getting deleted.

Change:Fixed the xml file, install sequence and files are being delete

dImpact:

Diagnostic Driver


Fixes:


19/96

===== 1. Problem: ( Cont00051435 ) CR Installer unable to see BRCM Memory Stick icon

Cause: ON 64 bit machine, the registry entry for Memory Stick was not correct. Change:

Fixed the Registry Entry, changed the label for SD from Secure Digital to Secure Digital/MMS. Finally, replaced the SD icon with the new one provided.

Impact: Card Read Installer



The correct icons were not being displayed for SD, MD, XD.Cause:

Requirements mapped wrong icons to SD, MD & XD Change:

For each of the above component, added the proper entry in the

Registry for the iconImpact: Card Read Installer


Enhancement: =========== 1. Change: ( Cont00050253 ) Missing license file and removed Readme.txt. Due to missing files, build failed. The build showed sequence errors too.

Impact: Diagnostic Driver Installer

2. Change: ( Cont00051328 ) Card Reader installer with Disk icon Installed Impact: Card Reader Installer

Version 3.14.18 (November 24, 2010)-----------------------------------

Enhancement: ===========

1. Change: ( Cont00051088 ) block downgrade from T6.2 to T6.0. Impact: NetXtreme II and OEM Installers.

Version 3.14.17 (November 19, 2010)----------------------------------- Enhancement: ===========


20/96

1. Change: ( Cont00050253 ) Add a new B57wdiag Installer for Skinny driver Impact: Diagnostic Driver

Fixes: ===== 1. Problem: ( Cont00050824 ) NetLink Driver Installer: The driver .sys

file still exists after the installer is uninstalled. Cause: On windows 7, the installation API failed to uninstall the device and delete feature is ignored on Windows 7. Change:

Fixed the installation API and manually handle driver file deletion. Impact: NetXtreme, NetLink, NetXtreme II, and OEM Installers

2. Problem: ( Cont00050140 ) Inconsistent behavior of "This feature will be installed

on local hard drive" Cause: The BASP feature GUI was not implemented properly.

Change: Fixed the BASP feature GUI to follow the correctcommands.

Impact: OEM Installers.

Version 3.14.16 (November 5, 2010)---------------------------------- Enhancement: =========== 1. Change: ( Cont00049733 ) OEM Downgrade Messaging Program.

Impact: Modified the downgrade message.

2. Change:Enable upgrade path to T6.2 and 14.4.

Impact: Upgrade Path.

Fixes: ===== 1. Problem: ( Cont00050050 ) OEM installer overwrites the log instead of appending. Cause:

Installer deleted the file before appending the log file. Change:

Keep on appending into the file. Impact: OEM Installers.

Version 3.14.15 (October 22, 2010)---------------------------------- Fixes: =====


21/96

1. Problem: ( Cont00048605 ) CardReader installer: Unable to install XD driver

with B57765x Cause: This fix should apply for XP as well. Change:

Workaround to install the second driver file. Impact: Card Reader Installer.

Version 3.14.14 (October 21, 2010)---------------------------------- Enhancement: =========== 1. Change:

Added new co-installer files for iSCSI driver Impact: NetXtreme II and OEM Installers


Enable upgrade path for T6.0 gold update Impact: OEM Installer

Version 3.14.12 (September 8, 2010)----------------------------------- Enhancement: =========== 1. Change: ( Cont00049755 ) OEM Requested enhancement. Impact: OEM Installer

Version 3.14.11 (August 12, 2010)--------------------------------- Fixes: ===== 1. Problem: ( Cont00049205 ) Setup.exe uses an incorrect registry key

to record the family driver version. Cause: Registry key path was changed. Change:

Changed the registry path. Impact: OEM Installers.

2. Problem: ( Cont00048988 )

OEM Installer: User is prompted to restartsystem before installation is complete.

Cause: The system tried to install the child driver simultaneously with the installer. Change:

Change code for installer to take over the entire installation.


22/96


Version 3.14.10 (August 5, 2010)-------------------------------- Fixes: ===== 1. Problem: ( Cont00049205 ) Setup.exe uses an incorrect registry key

to record the driver family version. Cause: Registry key path was changed. Change:

Changed the registry path. Impact: OEM Installers.

Version 3.14.9 (August 3, 2010)------------------------------- Fixes: ===== 1. Problem:

NetXtreme Installer did not upgrade properly Cause:

Upgrade path was not enabled from previous release. Change:

Enable upgrade path. Impact: NetXtreme Installer.

2. Problem: ( Cont00049168 ) OEM Requirement was broken at x64 platform. Cause: Coding error. Change:

Fixed coding error.

Impact: OEM DTM Installer.

Version 3.14.8 (July 30, 2010)------------------------------ Enhancement: =========== 1. Change: ( Cont00047717 ) Install-W2K8 R2 Chimney Popup text incorrect Impact: OEM Installer

2. Change: ( Cont00045618 )

Block installer downgrade from T6.0 Impact: OEM Installer

Fixes: ===== 1. Problem: ( Cont00048527 ) Fixed for OEM Requirement specification. Cause: Coding error.


23/96


24/96


25/96

Version 3.14.3 (June 22, 2010)------------------------------ Fixes: ===== 1. Problem: ( Cont00048332 ) Installer : BSOD occurs when driver kit

uninstalled from add-remove programs Cause: Driver version mismatch causing a BSOD. Change:

Disable parent device in NX2 uninstallation Impact: NetXtreme II and OEM Installers

2. Problem: ( Cont00048391 ) BSOD occurs when run uninstall on 57765x/57765. Cause: Driver version mismatch causing a BSOD. Change:

Disable device driver during uninstallation Impact: NetXtreme I and OEM Installers

3. Problem: ( Cont00048434 )

OEM Installer is not according to specification. Cause: Side effect of Cont00045606. Change:

Revert some changes for Cont00045606 to matchrequirement.

Impact: OEM DTM Installer

Version 3.14.2 (June 9, 2010)----------------------------- Enhancement: ===========

1. Change: ( Cont00047008 ) New Card Reader Driver Installer Impact: Broadcom Card Driver Installer

Version 3.14.1 (May 6, 2010)------------------------------- Fixes: ===== 1. Problem:

BACS on 64 bit platform is not localized on Russian language. Cause:

Installer failed to copy the resource dll folder into the correct Russion folder. Change:

Fixed the resource dll path. Impact: Management and OEM DTM Installer

2. Problem:French and Norwegian help file for BACS cannot be loaded.


26/96

Cause: Installer failed to copy chm file into the correct folders. Change:

Fixed the chm file path. Impact: Management and OEM DTM Installer

Version 3.14.0 (April 17, 2010)------------------------------- Enhancement: =========== 1. Change:

Changed BACS installation to include all chm files Impact: Management, OEM DTM, and OEM Installers

Version 3.12.41 (February 26, 2010)----------------------------------- Fixes: ===== 1. Problem: ( Cont00046229 ) Pop out incorrect installation message. Cause: Installer failed to exercise the custom action due to typo.

Change: Fixed the typo Impact: Management Installer

Version 3.12.40 (February 12, 2010)----------------------------------- Enhancement: =========== 1. Change: ( Cont00045949 ) Enable upgrade path from all previous T5.2 packages. Impact: Umbrella Installler

Version 3.12.39 (February 11, 2010)----------------------------------- Fixes: ===== 1. Problem: ( Cont00045829 ) Installer is not registering Management Agent Event source. Cause: Installer failed to register Management Agent event source Change:

Register Management Agent Impact: Management and OEM DTM Installer

Version 3.12.38 (February 3, 2010)----------------------------------

Enhancement: =========== 1. Change: ( Cont00045606 ) OEM specific enhancement Impact: OEM Installler


27/96


28/96

OEM DTM Installer

2. Problem:Some errors found on localized installer.

Cause: Strings are not parsed properly. Change:

Fixed the localization strings. Impact: NetLink Installer

Version 3.12.36 (January 20, 2010)---------------------------------- Fixes: ===== 1. Problem: ( Cont00045369 ) Failed to terminate when necessary on 64 bit installer. Cause: The x64 code did not terminates the installer when asked. Change:

Changed the code to terminate installer when asked. Impact: NetLink Installer

Version 3.12.35 (January 15, 2010)---------------------------------- Fixes: ===== 1. Problem: ( Cont00045343 ) Bug found on OEM specific enhancement. Cause: The application is unable to create the security attribute to the target system. Change:

Add API call to create appropriate security attribute. Impact: NetLink Installer

2. Problem: ( Cont00044907 ) Block downgrade path to T4.6 gold installer. Cause: The installer did not block current installer (T5.2) downgrade to T4.6 installer. Change:

Add restriction to block T4.6 installer. Impact: OEM Installer


Enhancement: =========== 1. Change: ( Cont00044400 ) Add Support for OEM Installer Impact: NetLink Installler

2. Change: ( Cont00044450 ) Add Vietnamese and Polish to the NetLink Installer

List of Localized Languages


29/96

Impact: NetLink Installler

Version 3.12.33 (November 30, 2009)----------------------------------- Enhancement: =========== 1. Change: ( Cont00042442 ) Add support for custom OEM process - server Impact: OEM Installler

2. Change: ( Cont00044490 ) T5.2 Umbrella Installer Downgrade Blocking Impact: OEM Installler

Fixes: ===== 1. Problem: ( Cont00042120 ) No way to avoid TOE being enabled by the Broadcom

installer Cause: The popup message box did not give the option to accept/reject

the action. Change:Changed popup message box to be flexible.

Impact: NetXtreme II and Umbrella Installer

2. Problem: ( Cont00044638 ) After uninstall, OIS drivers remains in windows driver folder. Cause: OIS driver inf file has different section name than other inf files. Change:

Changed implementation to accomodate different inf section name

Impact: All installers

Version 3.12.32 (November 11, 2009)----------------------------------- Enhancement: =========== 1. Change: ( Cont00044578 ) Modify OEM DTM installer to requirements Impact: OEM DT/MB Installers

2. Change: ( Cont00044336 )

Modify Desktop installer to include teaming Impact: Management Installer

Version 3.12.31 (October 30, 2009)---------------------------------- Fixes: ===== 1. Problem: ( Cont00044357 ) Uninstalling OEM DTM installer causes third party


30/96

SW to report "inconsistancy" Cause: A shared registry key was removed after uninstallation. Change:

Change the code to remove to not remove registry key if it still being used. Impact: OEM DTM Installer

Version 3.12.30 (October 28, 2009)---------------------------------- Fixes: ===== 1. Problem: ( Cont00044078 ) UART Support for OEM DTM Installer Cause: A few files did not get copied over to the AMD64 platform. Change:

Copy the appropriate files to AMD64 Impact: OEM DTM Installer

Version 3.12.29 (October 15, 2009)

---------------------------------- Fixes: ===== 1. Problem: ( Cont00043644 ) OEM Installer could not run when multiple arguments are passed. Cause: Parsing error introduced when adding new fields in the log file. Change:

Fixed the parsing error. Impact: OEM DTM Installer

2. Problem: ( Cont00044137 ) Installer SilentBACSwCIM.txt contains incorrect string. Cause: Incorrect GUID. Change:

Fixed to the correct GUID. Impact: Management Installer

Version 3.12.28 (October 14, 2009)---------------------------------- Enhancement:

===========1. Change: ( Cont00044078 )

Added UART support for OEM DTM Installer. Impact: OEM DTM Installer

Version 3.12.27 (October 9, 2009)--------------------------------- Enhancement: ===========


31/96


32/96


33/96

Localization Change:

Fixed the localization issues Impact: OEM DTM Installer

4. Problem: ( Cont00042726 ) ServerCore:OEM Installer: The ndis driver is not

getting installed, the in-box driver remains afterinstallation is complete.

Cause: The ndis driver did not get installed in the

Windows 7 server core Change:

Fixed the condition to install ndis driver onWindows 7.

Impact: NetXtreme II and OEM Installers

5. Problem: ( Cont00042946 ) Fatal error during installation received when installing

CIM Provider via Control Panel\Programs Cause: Vista and above OS do not elevate itself when modifying

installer components via control panel. Change:Added the capability to elevate itself when installing

new components Impact: Management and OEM Installers

6. Problem: ( Cont00042949 ) ManagementAppInstaller: BASFND.sys should not be copied

on to cim,snmp,brcmagent directory Cause: Obsolete file. Change:

Removed obsolete file from the installers. Impact: Management and OEM Installers

7. Problem: ( Cont00042986 ) BACS Installer v12.28.01- Cannot uninstall CIM Provider Cause: Corruption occurred on 64 bit OS Change:

Fixed the corruptionImpact:

Management and OEM Installers

8. Problem: ( Cont00042984 ) BACS Installer :12.28.01 install BASP under

vista x86 have error message. Cause: The BASP location was not specified properly. Change:

Specify the BASP install location properly Impact: Management and OEM Installers


34/96

9. Problem: ( Cont00043042 ) WMI folder is not removed when perforning uninstall

via Add/Remove Programs. Cause: Directory is being locked when removing WMI folder. Change:

Unlock the WMI folder Impact: Management and OEM Installers10. Problem: ( Cont00042912 )

No support informations in add/remove programs. Cause: Support information is missing. Change:

Added the support informations Impact: Management Installer

Version 3.12.22a (July 16, 2009)-------------------------------- Fixes: ===== 1. Problem: ( Cont00042617 )

Extract driver does not function properly Cause: A typo was found in the source code Change:

Fixed the typoImpact:

OEM DT/M Installer

Version 3.12.22 (July 14, 2009)------------------------------- Enhancement: =========== 1. Change: ( Cont00040825 )

Enhancement request for OEM on Mobile platform Impact: Management InstallerVersion 3.12.21 (July 9, 2009)------------------------------ Enhancement: =========== 1. Change: ( Cont00042496 ) OEM Enhancement request on OEM DTM Installer Impact: OEM DTM Installer

2. Change: ( Cont00042507 ) Modify BACS installer to include WMI provider Impact: Management Installer

Fixes: =====

1. Problem: ( Cont00042478 ) Modify Driver installer to incorporate

additional driver


35/96

Cause: Support for new driver installers Change:

Added for new driver support Impact: NetXtreme I Installer

Version 3.12.20 (July 1, 2009)------------------------------ Enhancement: =========== 1. Change:

Enable Upgrade path for all Installers Impact: All Installers

Fixes: ===== 1. Problem: ( Cont00042384 ) OEM Silent install log does not behave properly Cause: The silent installation log was not implemented Change:

Impelement silent install properly

Impact: Driver and Apps Installers

2. Problem: ( Cont00042392 ) Windows Installer: does not have the option to install

BASP on Windows EBS. Cause: The windows condition restriction was implemented for

both SBS and EBS. Change:

Allow EBS to install BASP Impact: Management and OEM Installers

Version 3.12.19 (June 30, 2009)------------------------------- Enhancement: =========== 1. Change: ( Cont00040825 ) Enhancement request for OEM on Mobile platform Impact: Management Installer

Fixes: ===== 1. Problem: ( Cont00042384 )

OEM Silent install log does not behave properly Cause: The silent installation log was not implemented Change:

Impelement silent install properly Impact: Driver and Apps Installers

Version 3.12.18 (June 26, 2009)-------------------------------


36/96

Enhancement: =========== 1. Change: ( Cont00040577 ) Enhancement for OEM Impact: Driver and Apps Installers

Version 3.12.17 (June 24, 2009)------------------------------- Fixes: ===== 1. Problem:

Some text got cutoff on the localized installer Cause: Some localized text are longer

Change:Resize UI controls to accomodate the localized text

cutoff Impact: Management InstallersVersion 3.12.16 (June 12, 2009)------------------------------- Enhancement:

===========1. Change:Remove UART support for Rel 12.2

Impact: NetXtreme I Installer

Fixes: ===== 1. Problem: ( Cont00041065 ) 570X driver installer v12.21.01 used 57760 to uninstall

driver will fail under Win 7. Cause: Custom Action msi will show windows 7 as Windows Vista

when OS version check is called. Change:Used Windows Installer OS check instead

Impact: NetXtreme I, NetXtreme II, and Umbrella Installers

2. Problem:BACS Arabic support is missing

Cause: The Arabic support code was not sync'd up properly Change:

Sync up the Arabic support Impact:

Management Installers

Version 3.12.15 (June 12, 2009)------------------------------- Enhancement: ===========

1. Change: ( Cont00041997 ) Text incorrect in W2K8 R2 x64 Installer Dialog Box

about TOE being enabled Impact:


37/96

NetXtreme II and Umbrella Installer

Version 3.12.14a (June 8, 2009)------------------------------- Fixes: ===== 1. Problem: ( Cont00041814 ) BACS3 installer progress bar shows only 2% when

installation completes Cause: The progress bar is not fully finished when the installation is done Change:

When the installation is finished, the progress bar is updated to show as complete Impact: Management and Umbrella Installer

Version 3.12.14 (June 2, 2009)------------------------------ Enhancement: ===========

1. Change:Added Arabic Support for BACS

Impact: Management Installer

Fixes: ===== 1. Problem: ( Cont00040698 ) BACS installer:CIM provider can't get cleaned up during

uninstallation. Cause: Coding error to stop removing the WMI when the library could not find the related products in the system Change:

Fixed the coding error

Impact: Management and Umbrella Installer

2. Problem: ( Cont00041065 ) 570X driver installer v12.21.01 used 57760 to uninstall

driver will fail under Win 7. Cause: In Windows 7 RC, uninstallation of the driver using

MSFT API does not delete the driver binary file. Change:

Added a workaround to delete the driver binary file when the files are no longer needed Impact:

NetXtreme I, NetXtreme II, and Umbrella Installers

Version 3.12.13 (June 1, 2009)------------------------------ Fixes: =====

1. Problem: ( Cont00041658 ) K57 driver installer -Windows7 incompatibility

message


38/96

Cause: The OS launch condition from older Installshield

was not compatible with the current Installshield Change:

Revised OS check launch condition Impact: Netlink Installer

Version 3.12.12 (May 29, 2009)------------------------------ Fixes: =====

1. Problem: ( Cont00041548 ) Umbrella Installer Should Not Run in Windows 7 Cause: Umbrella Installer ran on Windows 7 desktop Change:

Prevent umbrella installer to run on Windows 7 Desktop Impact: Umbrella installer

Version 3.12.11 (May 26, 2009)------------------------------

Fixes: =====1. Problem: ( Cont00041499 )

Umbrella installer: Fails to complete installation. Cause: Failed to extract some support files

Change:Updated the correct path to extract support files

Impact: NetXtreme II and Umbrella installer

2. Problem: ( Cont00041405 ) Windows 7x64, Build 7127: 57710 Loses its

Registry entry upon Drivers Unistall, viaUmbrella Installer, v12.05.02 Cause: The installer did not remove the old devices completely on evbd devices Change:

Cleaned up evbd devices completely after uninstallation Impact: NetXtreme II and Umbrella installer

Version 3.12.10 (May 22, 2009)------------------------------ Enhancement:

===========1. Change: ( Cont00039889 )

Modify Driver installer to allow the installetionof two INF Files and 3 Cat files

Impact: NetXtreme I Installer

Version 3.12.9 (May 20, 2009)----------------------------- Enhancement:


39/96

===========1. Change: ( Cont00040922 )

Suppress BASP offering in Windows 2008 SBS Impact: Management and Umbrella Installer

Fixes: =====

1. Problem: ( Cont00041259 ) Driver installer: Silent uninstall command does not

execute uninstall of the drivers. Cause: GUID was not properly documented Files: NetXtreme II installer Change:

Fixed documentation to reflect the correct GUI Impact: NetXtreme II installer

2. Problem: ( Cont00040095 ) BASP driver does not update correctly using BACS installer Cause: INF check validation treated warning as error. Therefore,

some older inf files are failed to be deleted Files: Management Installer Change:

Clean up the old BASP inf files during upgrade Impact: Management Installer

Version 3.12.8 (May 13, 2009)----------------------------- Enhancement: =========== 1. Change: ( Cont00039645 )

BACSCli: Make as part of the Driver / Management Appsinstaller Impact: Management, Umbrella, and UmbrellaDTM Installer

2. Change: ( Cont00040922 ) Suppress BASP offering in Windows 2008 SBS Impact: Management and Umbrella Installer

3. Change: ( Cont00041228 ) Added one functionality to check and enable System TCP

Offload Chimney state for Windows Vista or above.


Fixes: ===== 1. Problem: ( Cont00040095 ) BASP driver does not update correctly using BACS installer Cause: On Windows 2000, the device manager picked the older inf

file to bind.


40/96

Files: Management Installer Change:

Clean up the old BASP inf files during upgrade Impact: Management Installer

2. Problem: ( Cont00040698 ) CIM provider can't get cleaned up during

uninstallation. Cause: Coding error to skip the uninstallation of CIM provider Files: Management, Umbrella, UmbrellDTM Installer Change:

Fixed coding error to properly check for the related component being installed in the system Impact: Management, Umbrella, UmbrellDTM Installer

3. Problem: ( Cont00039570 ) Umbrella Installer does not install on Windows

Server 2008 Core x64 (Win 7)

Cause: The current MSFT library does not support Windows 7 server core. Files: All installers Change:

Updated the MSFT library to include the latest Win 7 support Impact: All installers

4. Problem: ( Cont00040957 ) BACS installer-The syntax of silent uninstall is

incorrect Cause: The GUID is incorrect for silent uninstallation Files: Management Installer Change:

Fixed the incorrect GUID Impact: Management Installer

Version 3.12.7 (April 24, 2009)

------------------------------- Fixes: ===== 1. Problem: ( Cont00040794 ) Umbrella DTM: wrong friendly name Cause: Friendly name was overwritten during code changes Files: Desktop/Mobile Umbrella Installer Change:


41/96

Restore back the friendly name Impact: Desktop/Mobile Umbrella Installer

Version 3.12.6 (April 21, 2009)------------------------------- Fixes: ===== 1. Problem: ( Cont00040779 ) Umbrella DTM does not install on Win7 Cause: Umbrella DTM still blocked for Win 7 Files: Desktop/Mobile Umbrella Installer Change:

Open restriction for Win 7 installation for UmbrellaDTM Impact: Desktop/Mobile Umbrella Installer

Version 3.12.5 (April 21, 2009)------------------------------- Enhancement: =========== 1. Change: ( Cont00039991 )

Suppress Driver/Umbrella Installers Downgrade Capabilityfor T5.0 Due to New Features Added Impact: Umbrella Installer

2. Change:Added back Windows 7 and Win2k8 R2 to the installers

Impact: All Installers


Some text are cut-off at the management installer Cause: The dialog size is too small Files: Management Installer Change:

Changed some dialog sizes on management installer to fix the text cut-off problem Impact: Management Installer

2. Problem: ( Cont00039303 ) Umbrella Installer does not install ndis6 drivers in

Win2k8-64 R2 Cause: No Support for Win2k8 R2 yet Files: All Installer Change:

Added support for Win2k8 R2 Impact: All Installers


42/96

Version 3.12.4 (March 23, 2009)------------------------------- Enhancement: =========== 1. Change:

Enabled upgrade path of Management Console installer from previous versions Impact: Management Console Installer

2. Change:Added support for a new file in Manamgenet console

since v1.2.0 Impact: Management Console Installer

3. Change: ( Cont00040139 ) Prevent NXI Driver Installer for 12.0 to Run in

Windows 7 Impact: All 12.0 Installers

4. Change: ( Cont00040169 ) Block the downgrade of 12.0 drivers to 11.7 drivers

Impact: NetXtreme I Driver Installer

Version 3.12.3 (March 12, 2009)------------------------------- Enhancement: =========== 1. Change: ( Cont00039889 ) Modify Driver installer to allow the installetion

of two INF Files Impact: NetXtreme I Driver installer

Fixes: ===== 1. Problem: ( Cont00039898 ) Dashmgmtcon incorrect mof for Windows 2000 Cause: The installer is compiling XP and above mof files Files: Management Console Installer Change:

Changed the behavior to compile Windows 2000 mof files for both DASH and WMI Impact: Management Console Installer

2. Problem: ( Cont00039871 )

Dashmgmtcon installer unable to uninstall from silent.txt Cause: Side effect of the build where new Product ID will be issued for every build Files: Build Script Change:

Change Script behavior to update all silent.txt ID when


43/96

new product code is generated Impact: Build Script

Version 3.12.2 (March 5, 2009)------------------------------ Enhancement: =========== 1. Change: ( Cont00038883 ) Updated localization files for Arabic

languages Impact: Management Installer

2. Change: ( Cont00038883 ) Umbrella installer in 12.0 release for DT/MB

needs localization Impact: Desktop/Mobile Umbrella Installer

Fixes: ===== 1. Problem: ( Cont00039577 ) BACS Installer v12.01.01 can't exceute under

Vista and XP. Cause: Installshield upgrades causes the GUID for each the project change and some path are using the old

GUID and could not be found using the newerinstallshield

Files: Management, Desktop/Mobile Umbrella Installer Change:

Changed the path to use the absolute path instead of related path that contains the GUID Impact: Management, Desktop/Mobile Umbrella Installer

2. Problem: ( Cont00039731 ) BACS Installer : BACS install second time will be failed

in 2K3-IA64 Cause: Some actions check for AMD64 system while in the IA64

platform.Files:

Management Installer Change:

Fixed the actions to check under IA64 platform Impact: Management Installer

3. Problem: ( Cont00039701 ) Dashmgmtcon installer cannot complete installer in

Windows 2000 Cause: The setup prerequisite for checking the .NET 2.0 existence in Win2k was not working properly. Files: DASH Management Console Installer Change:


44/96

Changed the setup prerequiste to use default Installshieldcondition checks

Impact: DASH Management Console Installer

Version 3.12.1 (February 13, 2009)---------------------------------- Enhancement: =========== 1. Change:

Added localization filesImpact:

NetXtreme I, NetLink, Management, andUmbrellaDTM installers

Fixes:

===== 1. Problem: ( Cont00039577 ) BACS Installer v12.01.01 can't exceute under

Vista and XP. Cause: Installshield upgrades causes the GUID for each the project change and some path are using the old

GUID and could not be found using the newer

installshield Files: Management, Desktop/Mobile Umbrella Installer Change:

Changed the path to use the absolute path instead of related path that contains the GUID Impact: Management, Desktop/Mobile Umbrella Installer

Version 3.12.0 (February 12, 2009)---------------------------------- Enhancement: ===========

1. Change: Upgraded installer files to newer Installshield Impact: All Installers

Fixes: ===== 1. Problem: ( Cont00039488 ) BACS Unrecognized characters when installing in

Vista Thai version Cause: The build script adds Thai language into the

installation set languages where the installers

do not support Thai Files: NetLink, NetXtreme I, Management Installers Change:

Fixed the build script to exclude Thai Impact: NetLink, NetXtreme I, Management Installers

Version 2.11.70 (January 23, 2009)----------------------------------


45/96

Enhancement: =========== 1. Change: ( Cont00039158 ) Uninstalling umbrella installer leaves reg

entries behind Impact: Added functionality to remove drivers' registry entry during uninstallation

Fixes: ===== 1. Problem: ( Cont00039206 ) Upgrade to T4.4 or T4.6 driver set fails. Cause: The installer failed to handle inf files that

do not have version string Files: All installers Change:

Fixed code logic to handle inf files properly Impact: All installers

2. Problem: ( Cont00039210 )

Installing the T4.6 driver installer on XP (x86)causes BSOD in eVBD Cause: The VBD was included on NX2 driver installer when running on XP Files: NetXtreme II driver installer Change:

Exclude eVBD driver when installing on XP Impact: NetXtreme II driver installer

3. Problem: ( Cont00039217 )

BACS Installer v11.85.01_IA32 & IA64_Brcm -SilentMgntApps.txt contains incorrect uninstallerstring.

Cause: Installer text file was not up to date. Files: Management Installer Change:

Updated management installer text files Impact: Management Installer

4. Problem: ( Cont00038939 )

Bacs installer: Error with Transform afterUpgrade from W2K3 --> W2k8

Cause: Management installer keeps a cache location to the temp folder of the localization files to a certain location that is exists in Win2k3 but the location changes after upgrade on Win2k8. Files: Management Installer Change:


46/96

Changed the path location of the localization fileto a valid cache path for all OSes


Version 2.11.69 (December 19, 2008)----------------------------------- Enhancement: =========== 1. Change: ( Cont00038912 ) W2K3 32Bit - BASP SLB Adapter Enabled after upgrade

(From T4.4 to T4.6) Impact: Management and Umbrella installers

Fixes: ===== 1. Problem: ( Cont00038739 ) NetLink Driver Installer- Silent Uninstall from

any folder doesn't respond. Cause: Silent.txt is not updated Files: NetLink Installer

Change: Updated silent.txt Impact: NetLink installer

Version 2.11.68 (November 21, 2008)----------------------------------- Enhancement: =========== 1. Change:

Added support for monolithic driver for iSCSI crash Dump Impact:

NetXtreme I, NetXtreme II, and Umbrella installersFixes:

===== 1. Problem: ( Cont00038287 ) BACS Installer: BACS Installer(version: 11.75.08)

Silent install by feature on IA32 and x64 platformscan't install.

Cause: Feature name list was not properly listed Files: Management Installer Change:

Updated silent.txt Impact: Management installer

Version 2.11.67 (November 14, 2008)----------------------------------- Enhancement: =========== 1. Change:

Include couple of useful XML files for


47/96

DashMgmtCon installer project. Impact: DashMgmtCon installer/package. Notes: Additional files included.

Version 2.11.66a (October 29, 2008)----------------------------------- Fixes: ===== 1. Problem: ( Cont00038181 ) BSOD when running umbrella installer in iSCSI boot

w2k3 environment Cause: The installer changed the KMDF registry setting as

requested back in older release that is not necessary anymore. Files: NetXtreme II and Umbrella installer Change:

Removed the code path to changed KMDF registrysettings

Impact:

NetXtreme II and Umbrella installer

Version 2.11.66 (October 27, 2008)----------------------------------- Fixes: =====

1. Problem: ( Cont00038167 ) Management installer v 11.77.01 reported

Error 2762 during installation. Cause: The installer did not sequence the actions properly due to the side effect on release v2.11.64.

Files: Management and Umbrella Installer Change:

Sequence the actions properlyImpact:

Management and Umbrella Installer

Version 2.11.65 (October 26, 2008)----------------------------------- Fixes: =====

1. Problem: ( Cont00038085 ) BACS Installer: BACS Installer(version: 11.75.05)

Silent install by feature on IA32 and x64 platformsCause:

Silent.txt was not updated properly Files: Management installer Change:

Updated silent.txt Impact: Management installer


48/96

2. Problem: ( Cont00038137 ) The state of 57710 is not maintained after upgrade Cause: The installer only looked for the device's 2 part ID Files: NetXtreme II and Umbrella installer Change:

Changed implementation to look for both the devices'2 part and 4 part ID


3. Problem: ( Cont00038053 ) Adding CIM Install Requires Reboot (on top of a driver

installation) Cause: The installer always call BASP upgrade even though

the BASP has already installed. Thus, the installer requires reboot Files: Management and Umbrella installer Change:

Fixed the condition to not re-install BASP if BASP feature state is not changed

Impact: Management and Umbrella installer

Version 2.11.64 (October 21, 2008)---------------------------------- Fixes: ===== 1. Problem: ( Cont00038037 ) Installer fails during installation on 2008 64 bit with

ISS and terminal services installed Cause: Installation of WMI provider was not complete because the API that we use failed when Terminal Services is enabled.

Files: Umbrella installer Change:

Changed the implementation to use property name installation Impact: Umbrella installerVersion 2.11.63 (October 13, 2008)---------------------------------- Enhancement: =========== 1. Change:

Added support for installing v11.0.18

WMI provider and later Impact: Management and Umbrella Installer

2. Change:Added WMI Provider mof files for Management

Console to support WMI provider testing Impact: Management Console Installer


49/96

Version 2.11.62 (October 6, 2008)--------------------------------- Enhancement: =========== 1. Change: ( Cont00037580 ) Umbrella DTM installer: Silent install

requirements. Impact: Desktop/Mobile Umbrella installer Notes: Changed the user-friendly name of the installer

Version 2.11.61 (October 3, 2008)--------------------------------- Enhancement: =========== 1. Change: ( Cont00037580 ) Umbrella DTM installer: Silent install

requirements. Impact: Desktop/Mobile Umbrella installer Notes: The capabilities to silent install without

the drivers can be used using the following syntax: Setup /s /v"/qn NO_DRIVER=Y"

Version 2.11.60 (September 28, 2008)------------------------------------ Enhancement: =========== 1. Change:

Update new method of compiling mof files for DASH Management Console Impact: DASH Management Console Installer

2. Change:Added support for Win2k8 driver

installation and block downgrade fromprevious releases for IA64 platform

Impact: NetXtreme I driver Installer

Version 2.11.59 (September 24, 2008)------------------------------------ Enhancement: =========== 1. Change: ( Cont00037291 )

Umbrella DTM installer needs K57drivers.(product key 12.8)

Impact: Desktop/Mobile Umbrella Installer


BACS help file for Umbrella DTM installerwas not copied to the proper languages


50/96

Cause:Umbrella DTM installer is not localized butthe BACS CHM files needs to be localized.

Files: Desktop/Mobile Umbrella Installer Change:

Change the condition to copy the appropriate help file for BACS for Umbrella DTM Impact: Desktop/Mobile Umbrella Installer

2. Problem: ( Cont00037133 ) BACS System tray icon not starting immediately

after install Cause:

A coding error when sequencing the actions for32 bit based installer

Files: Umbrella Installer Change:

Fixed the sequence properly for the actions Impact: Umbrella Installer

Version 2.11.58 (September 5, 2008)----------------------------------- Enhancement: =========== 1. Change: ( Cont00037064 ) OEM DT/MB: Umbrella installer product version key Impact: Desktop/Mobile Umbrella Installer

Fixes: ===== 1. Problem: ( Cont00037181 ) BACS3 installer: silent Install by feature on AMD64/EM64T

Platforms command fail. Cause:A typo was made in the silent.txt

Files: Management installer Change:

Fixed the typo Impact: Management Installer

Version 2.11.57 (August 29, 2008)--------------------------------- Fixes:

===== 1. Problem: ( Cont00036998 ) UmbrellaDTM: BACS crashes when executed in XP64 and Vista 64 Cause:

The file was read-only when it gets built and the registryentry are missing

Files: Umbrella DTM installer. Change:

Added the registry entry that are missing


51/96

Impact: Umbrella DTM installer

2. Problem: ( Cont00036906 ) Bcom installer CIM option stops Microsoft SMS Agent deployment Cause: Microsoft SMS agent is dependent on WMI service which gets restarted during installation/uninstallation of CIM provider Files: Management and Umbrella installer Change:

Changed the implementation and the WMI service restart is no longer needed. Impact: Management, Umbrella DTM, Umbrella installer

3. Problem: ( Cont00036999 ) BACS installer- It doesn't respond in silent install by

feature on AMD64/EM64T platforms. Cause: A typo was made in the silent.txt Files: Management installer Change:

Fixed the typo Impact: Management, Umbrella DTM, Umbrella installer

Version 2.11.56 (August 14, 2008)--------------------------------- Enhancement: =========== 1. Change: ( Cont00034359 ) DUP installer for DT/MB OEM Impact: Desktop/Mobile Installer


Ngen process takes unusually long time to optimize BACS on a closed network. Cause: Problem with ngen.exe. MSFT gave us a work around

for the problem. Files: Management/Umbrella installer. Change:

Incorporated MSFT suggested workaround.

Impact: Umbrella, and Management installer

2. Problem: ( Cont00036007 ) 'Program and Features' window displays incorrect location of

where files got installed Cause: Install Directory was not populated properly on 64 bit system Files: All installers


52/96


53/96


54/96

Translated the Swedish languanges properly Impact: NetXtreme Installer

Version 2.11.52 (July 7, 2008)------------------------------ Fixes: ===== 1. Problem: ( Cont00036201 ) BACS:11.64.01: JPN language shows ASF and New feature

instead of OOB and BRCM agent Cause: The strings for the OOB Mgmt was not done

properly for other languages Files: Management Installer Change:

Changed the strings for other languages to display the feature name properly Impact: Management installer

Version 2.11.51 (July 2, 2008)------------------------------


Added localization support for installers Impact: Management installer

Version 2.11.50 (June 13, 2008)------------------------------- Enhancement: =========== 1. Change: ( Cont00035832 ) Please enable ASF management support for BACS Installer

Impact: Management installer


Service name was incorrect for Management Agent Cause: Management Agent service name was incorrect Files: Management Installer Change:

Changed the Management Agent service name to the

correct name


Version 2.11.49 (June 10, 2008)------------------------------- Enhancement: =========== 1. Change:


55/96

Added support for new directory structure for WMI provider Impact: Management and Umbrella installers

Version 2.11.48 (June 10, 2008)------------------------------- Enhancement: =========== 1. Change: ( Cont00035041 ) Installer: installer shows 0% or 100% completion during

bacs optimization Impact: Management and Umbrella installers


A typo was found on DASH Management Installer Cause: Typo Files: Dash Mgmt Installer Change:

Fixed the typo

Impact: DASH Management installer

Version 2.11.47 (June 9, 2008)------------------------------ Enhancement: =========== 1. Change:

Changed installer to support new method for removing WMI provider Impact: Management and Umbrella installers

Version 2.11.46 (June 2, 2008)------------------------------ Enhancement: =========== 1. Change:

Added new files for DASH Management installer to support new xsds validation files Impact: DASH Management installer

Version 2.11.45 (May 20, 2008)------------------------------ Enhancement:

=========== 1. Change:

Added support for the new Broadcom Management Agent and separate Management Configuration for BACS and Management Agent into different component Impact: Management Installer


56/96

Version 2.11.38a (May 15, 2008)------------------------------- Fixes: ===== 1. Problem: ( Cont00035380) DF217792: Umbrella Installer Triggers "Missing ngen.exe" Errorin

Absence of MS .Net Cause: No condition check for the existence of .NET in the system Files: Internal file Change:

Added condition check for existence of .NET in the system Impact: Management and Umbrella installer

Version 2.11.38 (May 8, 2008)----------------------------- Enhancement: =========== 1. Change:

Added Broadcom DASH Management Console Installer Impact:

DASH Installer

Fixes: ===== 1. Problem: ( Cont00034832 ) Broadcom iSCSI Offload Devices Not Present Following Driver Upgrade Cause: The installer checks whether to modify driver parameter to accomodate iscsi enumeration from VBD if and only if the installer is doing an upgrade from T3.5 installer


Removed the condition and always modify driver parameter for umbrella installer Impact: Umbrella installer

Version 2.11.37 (April 26, 2008)-------------------------------- Fixes: =====

1. Problem: ( Cont00034958 ) Driver Installer: Diag driver does not get updated after

upgrade from earlier version. Cause: The installer that uses MSFT API install PnP devices does not use the appropriate flag Files: NetXtreme, NetXtreme I, and Umbrella installer Change:

Changed the appropriate flag for MSFT API


57/96

Impact: NetXtreme, NetXtreme I, and Umbrella installer

Version 2.11.36 (April 18, 2008)-------------------------------- Enhancement: =========== 1. Change:

Removed obsolete files from the installers Impact: NetXtreme II installer Fixes: =========== 1. Problem: ( Cont00034863 ) Umbrella Installer: Installer installs the incorrect

pdenu.dat file in bacs Cause: Umbrella installer picked up from the different location of pdenu.dat Files: Umbrella installer Change:

Changed the location where pdenu.dat gets picked up

2. Problem: ( Cont00034711 ) .pdb files are in x64 driver installer CAB file Cause: .pdb files were picked up by the installers Files: NetXtreme Installer Change:

Removed .pdb files from the installers

Version 2.11.35 (March 28, 2008)-------------------------------- Enhancement: ===========

1. Change: Removed Thai language support Impact: Management Installer

Fixes: =========== 1. Problem: ( Cont00034524 ) Umbrella Installer does not install on a Win2k8

domain controller Cause: The condition to check whether an OS is a supported OS for umbrella installer was not set properly


Fixed the condition to include the domain controller

Version 2.11.34 (March 28, 2008)-------------------------------- Enhancement: =========== 1. Change:


58/96

Changed iSCSI Crash Dump configuration for NetXtreme II to always install the file but not configure the registry entry Impact: NetXtreme II and Umbrella Installer

2. Change:Added support for BCM57710 iSCSI Crash Dump


3. Change: ( Cont00034301 ) Product version string for 4.4 should be 12.4.0

for umberlla installer Impact: Umbrella Installer

4. Change:Changed BACS JIT compilation to execute duringimmediate mode to make it run faster

Impact: Management and Umbrella Installer

Version 2.11.33 (March 25, 2008)

-------------------------------- Enhancement: =========== 1. Change:

Added support for NetXtreme iSCSI Crash Dump Impact: NetXtreme and Umbrella Installer

Version 2.11.32 (March 14, 2008)-------------------------------- Fixes: =========== 1. Problem:

Updated installer to pick up new string for localization Cause: Localization issues Files: Management Installer Change:

Fixed the localizations issue appropriately

Version 2.11.31 (March 11, 2008)-------------------------------- Fixes: =========== 1. Problem:

Localization issues on some of the strings and appearence Cause: Localization issues Files: Management and NetXtreme Installer Change:

Fixed the localizations issue appropriately

Version 2.11.30 (March 6, 2008)-------------------------------


59/96


Added support for Win2k for Netlink installer Impact: Netlink installer 2. Change:

Added support for selective build to include or exclude certain features during build time Impact: All Installers

Version 2.11.29 (March 3, 2008)------------------------------- Fixes: =========== 1. Problem: ( Cont00034022 ) LH-Upgrade Version Registry entry disappears Cause: The condition to uninstall the registry entry was not correct so it deletes the entry during upgrade Files: Umbrella installer

Change: Condition the registry key uninstallation correctly

2. Problem: ( Cont00034021 ) LH64-Registry entries missing when silent install is performed Cause: The component to install registry key entry was not

associated to any feature Files: Umbrella installer Change:

Associate the registry key component to the umbrella installer feature

Version 2.11.28 (February 27, 2008)----------------------------------- Enhancement: =========== 1. Change:

Changed directory structure for build process and populate all property description files to support localization Impact: Management and Umbrella installer

Version 2.11.27 (February 25, 2008)-----------------------------------

Enhancement: =========== 1. Change: ( Cont00033952 ) New product string required for T4.2 Impact: Umbrella Installer

Version 2.11.26 (February 19, 2008)----------------------------------- Enhancement:


60/96

=========== 1. Change:

Updated installers strings for localization Impact: NetXtreme, NetLink, and Management installers

Fixes: =========== 1. Problem: ( Cont00033883 ) BACS3 Installer - Files are missing from BACS folder by using

Silent Install by features on Vista_64 platform. Cause: BACS localization files feature was not setup as the children of BACS feature and was not required feature Files: Management installer Change:

Make BACS localization files as part of BACS sub-feature and requires it to be part of BACS when available

Version 2.11.25 (February 12, 2008)----------------------------------- Enhancement: ===========

1. Change: ( Cont00033700 ) Add UCM installer Impact: NetXtreme and NetLink installer

Version 2.11.24 (February 7, 2008)---------------------------------- Fixes: =========== 1. Problem: ( Cont00033760 ) BACS Installer causes SideBySide error in event log Cause: Microsoft Library for BACSTray was not properly published

during the shortcut creation Files: Management and Umbrella installer Change:

Removed Microsoft Dll from the installer since BACSTray v11.0.21.1 and forward does not require these Dll anymore

2. Problem: ( Cont00033786 ) Upgrade T4.0E/T4.2 umbrella installer v10.73.01 from T4.1

Gold umbrella v10.69.04 reported failure in LH. Cause: Microsoft Library for BACSTray was not properly upgraded Files:

Management and Umbrella installer Change:

Removed Microsoft Dll from the installer since BACSTray v11.0.21.1 and forward does not require these Dll anymore



61/96

Removed support for Win2k for NetLink installer Impact: NetLink installer


Exclude localization resources files from installingon server builds

Impact: Management and Umbrella installers


Added support for 57710 Impact: NetXtreme II and Umbrella installers

Version 2.11.20 (January 22, 2008)

---------------------------------- Enhancement: =========== 1. Change:

Added localization support for BACS 3 Impact: Management installer

Fixes: =========== 1. Problem: ( Cont00033476 ) BACS3 Installer v11.08.02 (x64) - installs BASP by default Cause:

Did not put prorper condition for x64 version of BACS installer Files: Management installer Change:

Added proper check for x64 in management installer

Version 2.11.14a (January 14, 2008)-----------------------------------* Cont00033412: iSCSI Boot: Please add 'iscsibcg /verif /fix'

to the umbrella installer and driver installer



Changed Management installer shortcut for BACSlaunch target

Impact: Management and Umbrella installer

2. Change: ( Cont00033365 )


62/96

BACS3: GUI installer needs BASP to bevisible but not selected by default


3. Change: ( Cont00033375 )Remove Everest support from Umbrella installer

Impact: Umbrella Installer

Fixes: =========== 1. Problem:

Empty IWARP Folder on NetXtreme II and Umbrella installer Cause: This folder was for IWARP feature that currently not relevant Files: NetXtreme II and Umbrella installer Change:

Removed empty IWARP folder from installer


--------------------------------- Fixes: =========== 1. Problem:

NetLink installer does not install on Vista-64 Cause: Netlink installer tried to install NDIS5.1 netlink driver on Vista64 and the path could not be found. Files: Netlink Installer Change:

Exclude the NDIS5.1 driver from installing on Vista-64

Version 2.11.12 (January 7, 2008)--------------------------------- Enhancement: =========== 1. Change:

Added support for Everest Impact: Umbrella Installer 2. Change:

Removed support for Windows 2000 Impact: Umbrella Installer

Version 2.11.11 (January 4, 2008)--------------------------------- Enhancement: =========== 1. Change:

Allow installers to run on Windows Server 2008 Impact: All installers



63/96

--------------------------------- Enhancement: =========== 1. Change: ( Cont00032911 ) BACS3: Need installable ASF option in BACS3 installer Impact: Management installer Fixes: =========== 1. Problem: ( Cont00033095 ) BACS installer from CD 10.7b.1 cd does not install ASF silently. Cause: ASF option was disable due to ASF visible that was introduced earlier Files: Management installer Change:

Changed ASF to visible for OEM

Version 2.11.9 (December 20, 2007)---------------------------------- Fixes: ===========

1. Problem: ( Cont00032135 ) BACS3 takes about 90 seconds to open on OEM device withdaughtercard

Cause: A configuration file is needed for BACS3 to disable .NET verification Files: Management and Umbrella installers Change:

Added a new configuration file


Fixes: =========== 1. Problem: ( Cont00033041 ) BACS3 Side by side red bang loged in windows event log. Cause: The assemblies library has not published yet when the installer tried to run the BACSTray on Vista/LH due to behavior change that was introduced on Vista/LH Files: Management and Umbrella installers Change:

Changed the sequence for running the BACSTray after the assemblies library being published.

Version 2.11.7 (December 12, 2007)---------------------------------- Enhancement: =========== 1. Change:

Blocked installers from installing to Win2k8 OS Impact: NetXtreme II, Management, and Umbrella installers


64/96

2. Change:Changed text for pop-up message when .NET Framework 2.0

is not present in the system Impact: Management and Umbrella installers

3. Change:Removed un-necessary iSCSI driver files from the installers

Impact: NetXtreme II and Umbrella installers

Version 2.11.6 (December 7, 2007)--------------------------------- Fixes: =========== 1. Problem: ( Cont00032858 ) BACS3 Side by side red bangs loged in windows event log. Cause: Installer did not include required localization MFC files

for BACS 3 Files: Management and Umbrella installers Change:

Added MFC localization required module

2. Problem: ( Cont00032822 ) BACS3 LH32-"Feature Description" & "InstallShield" is grayed

out in setup wizard Cause: "Feature Description" box was disabled Files: Umbrella installers Change:

Enable "Feature Description" box

Version 2.11.5 (November 30, 2007)----------------------------------

* Cont00032839 - LH64-Installer doesn't install drivers foriSCSI Offload Adapter

Version 2.11.4 (November 29, 2007)---------------------------------- Enhancement: =========== 1. Change:

Added documentation file for BACS 3 Impact: Management installer and Umbrella installer

Version 2.11.3 (November 26, 2007)


Changed file name for CIM components to accomodate new file name changes Impact: Management installer and Umbrella installer

2. Change:


65/96

Added JIT compiler for .NET framework 2.0 speed up BACS 3launch upon installation

Impact: Management installer and Umbrella installer

3. Change:Changed popup notification text and behavior when .NETframework is not present in the system

Impact: Management installer and Umbrella installer

Version 2.11.2 (November 21, 2007)---------------------------------- Enhancement: =========== 1. Change: ( Cont00032613 ) Modify BACS Installer to include graphical option to install ASF Impact: Management installer

Version 2.11.1 (November 15, 2007)---------------------------------- Enhancement:

=========== 1. Change:Added BASP, CIM, and SNMP components for OEM


Fixes: =========== 1. Problem: ( Cont00032496 ) Umbrella Installer: UI displays an incomplete error message

window with not text in Win2k Cause: String for the warning message was not in the

installer string table Files: Umbrella installers Change:

Umbrella installers


Add new NetLink driver installer for 5784 (Taishan) Impact:

NetLink Installer 2. Change:

Revert back changes on v2.10.59 for NetXtreme I installer Impact: NetXtreme I installer and Umbrella installer

Version 2.10.59 (November 9, 2007)---------------------------------- Enhancement: ===========


66/96

1. Change:Added support for 5784 (Taishan)

Impact: NetXtreme I installer


Added support for the latest CIM provider Impact: Management and umbrella installer

2. Change: ( Cont00032081 ) T4.0: umbrella installer will need to

check for the presence of ".NET" for BACS3 Impact: Management and umbrella installer

Fixes: =========== 1. Problem:

Setup /a overwrites iSCSI drivers between different

OSes Cause: Changed the path name for iSCSI Files: NetXtreme II and Umbrella installers Change:

NetXtreme II and Umbrella installers


Changed file names for BACS 3 Impact: Management and umbrella installer

Fixes: =========== 1. Problem: ( Cont00031704 ) BACS3 - Support information in add/remove programs

list BACS as BACS 2 in comments section Cause: Carried over from the older BACS 2 installer Files: Management installer

Change:Changed the strings for BACS 2 related files to BACS 3

2. Problem: ( Cont00032313 ) BACS3: BACS3 should check the existence of BACS2 before install Cause: Changed product code to perform major upgrade Files: All installers Change:


67/96

All installers

Version 2.10.56 (October 19, 2007)---------------------------------- Fixes: =========== 1. Problem: ( Cont00031704 ) BACS3 - Support information in add/remove programs

list BACS as BACS 2 in comments section Cause: Carried over from the older BACS 2 installer Files: Management installer Change:

Changed the strings for BACS 2 related files to BACS 3

2. Problem: ( Cont00031711 ) Umbrella Installer v10.53.1 doesn't install in Win 2k Cause: Setup Prerequisites for .NET Framework 2.0 in Win2k is different from other newer OSes Files: Management and Umbrella installer Change:

Changed the Setup prerequisites condition for .NET 2.0framework for all Oses according to MSFT KB318785

3. Problem: ( Cont00031919 ) Bacs3: Bacs systemtray does not start Cause: Migrated BACSTray to use Visual studio 2005 library Files: Management and Umbrella installer Change:

Included VS2005 libraries into the installers

4. Problem: ( Cont00031924 )

Bacs3: Bacs icon is missing in control panel Cause: Migrated BACSTray to use Visual studio 2005 library Files: Management and Umbrella installer Change:

Included VS2005 libraries into the installers


Added support for the new iSCSI driver name change Impact: NetXtreme II Installer and Umbrella installer

Fixes: =========== 1. Problem: ( Cont00031802 ) Umbrella Installer: reinstallation does not work. Cause: 64 bit umbrella and management installer called the wrong


68/96

API for BASP upgrade Files: Management and Umbrella installer 64 bit Change:

Used the correct API to upgrade BASP

Version 2.10.54 (October 9, 2007)--------------------------------- Enhancement: =========== 1. Change:

Silent installation by default does not install ISCSI Crash Dump driver Impact: NetXtreme II Installer and Umbrella installer

Fixes: =========== 1. Problem: ( Cont00031767 ) Silent.txt Advertises Silent Downgrade Feature for other

OEMsCause:

Silent.txt is not updated Files:

Silent.txt Change:Customize Silent.txt for each OEM


Added support for Windows Server 2008 Impact: All installers

Version 2.10.52 (October 5, 2007)--------------------------------- Enhancement: =========== 1. Change: ( Cont00031654 ) Umbrella Installer: Need to Include ISCSI Crash

Dump Driver Option as Seen on T3.7 Driver Installer Impact: Umbrella installer 2. Change:

Changed iSCSI Crash Dump driver name and description for installers Impact:

NetXtreme II driver installer and umbrella installer Fixes: =========== 1. Problem: ( Cont00031636 ) Umbrella Installer:Device drivers do not get loaded after

installation completes.Cause:

Wrong feature name is used for Umbrella installer Files: NetXtreme II driver installer and Umbrella installer


69/96

Change:Changed the action for installing devices

2. Problem:iSCSI Crash Dump driver registry modification gets calledall the time

Cause: No condition check for iSCSI crash dump action Files: NetXtreme II driver installer and Umbrella installer Change:

Changed the action for running iSCSI crash dump action


Added necessary files for BACS 3 Impact: Management and Umbrella installer

Version 2.10.50 (September 21, 2007)------------------------------------ Enhancement:

=========== 1. Change:Added support for BACS 3

Impact: Management and Umbrella installer 2. Change:

Removed support for Win9xImpact:

Management and Umbrella installer

Version 2.10.39 (September 20, 2007)------------------------------------ Enhancement:

=========== 1. Change:Added new feature for iSCSI Crash Dump utility

Impact: NetXtreme II Driver installer 2. Change:

Added support to disable downgrade for all installers prior to T3.7 Impact: NetXtreme II and Umbrella installer Fixes: =========== 1. Problem: ( Cont00031490 )

Windows 64 bit U-Installer does not write UInstallerVersionto WOW6432Node

Cause: Umbrella installer did not include 32 bit registry node Files: Umbrella Installer

Change:Added 32 bit registry node into 64 bit umbrella installer

Version 2.10.38 (September 19, 2007)


70/96

------------------------------------ Enhancement: =========== 1. Change: ( Cont00031471 ) The NX2 Driver Installer Should not Load ISCSI Drivers

including Crash Dump in Vista Impact: NetXtreme II and Umbrella Installer

Version 2.10.37 (September 10, 2007)------------------------------------ Fixes: ===== 1. Problem: ( Cont00031270 ) Additional modification in the driver installer is

required for iSCSI Boot crash dump support Cause: The registry entry was created on the wrong registry entry and the driver file was copied to the wrong

folder on x64 system Files: NetXtreme II and Umbrella installer Change:

Fixed the location for the driver file and registry entry


2. Problem:Co-Installer file was copied to the wrong directory

Cause: Co-Installer file for x64 was copied to the wrong system folder Files: NetXtreme II and Umbrella installer Change:

Fixed the path to copy the co-installer over Impact:

NetXtreme II and Umbrella installer

Version 2.10.36 (Septemter 5, 2007)----------------------------------- Enhancement: =========== 1. Change: ( Cont00030883 ) W2K3 x 64 update changes the device state from disabled

to enabled Impact: Umbrella installer

Version 2.10.35 (August 29, 2007)

--------------------------------- Enhancement: =========== 1. Change:

Added support for iSCSI driver installation Impact: NetXtreme II and Umbrella Installer 2. Change:

Create a registry entry in MSFT iSCSI initiator for iSCSI "crash dump"


71/96


Version 2.10.34 (August 23, 2007)-------------------------------- Enhancement: =========== 1. Change:

Changed U

Date post:	03-Jun-2018
Category:	Documents
Upload:	toast119
View:	219 times
Download:	0 times

Release Text Windowz

Documents