©20
11-2
015
Exce
ed O
ilfiel
d Eq
uipm
ent I
nc. A
ll rig
hts
rese
rved
Reliable & Innovative Sucker Rod Products
1 Reliable & Innovative Sucker Rod Products
State of art EquipmentExceed's sucker rod manufacturing facilities are equipped
with brand new state of the art equipment including
automated forging machines, automated threading and
digital controlled heat treatment ovens.
Un-matched CapacityExceed's annual sucker rod manufacturing capacity is well
over 100 million feet, making us the largest single sucker
rod manufacturing facility in the world. Leveraging cloud-
based ERP, inventory management systems, and experienced
operation teams. Exceed easily meets the demands of the
largest oil producers in the world.
Un-compromised QualityQuality is the top priority in the factory’s operations. The QA
department reports directly to the president of the company.
With sustained investment in new testing and inspection
equipment, and the continuation of improvements on the
quality control processes, the QA department rigorously
inspect and test every rod from raw material to final product.
Exceed proudly stands behind every rod it produces. Since
the beginning, Exceed created a culture where quality is our
highest priority and we set the bar for improving all quality
standards. Over the years, a systematic quality management
system was developed and integrated into each step of the
manufacturing process. Under the direct supervision from the
president of the company, the QA department goes beyond
the requirement of ISO9001 and API to test, inspect, track,
analyze, and correct any issues throughout the entire product
life cycle.
Reliable & Innovative Sucker Rod Products 2
EXCEED
OILFIELD
EQU
IPMEN
T
Sucker Rods and Pony Rods
API AND EQUIVALENT CORROSION RESISTANT HIGH-STRENGTH SPECIALTY RODS
API-C (AISI 1536)API-K (AISI 4621)API-D (AISI 4142)ED (25CrMoA)
EKD (AISI 3130)KD (AISI 4320)KD (AISI 4330)KD (AISI 4720)
EH (25 CrMoA)EHK (AISI 3130)EH6 (AISI 4138)EH7 (AISI 4330)
• EH9 - Corrosion resistant - Ultra high strength
• EHT - Designed for PCP - Dove-tail body connection
• SmartRod®
- Built-in RFID tracking
3 Reliable & Innovative Sucker Rod Products
Sucker Rods are available in 25ft/26ft/30ft Pony Rods are available in 2, 4, 6, 8, 10 and 12 ft
Accessories
EXCEED
OILFIELD
EQU
IPMEN
T
COUPLINGS POLISHED RODS SINKER BARS ROD GUIDE
• Grade - T/SM/HS
• Size - Full/Slim
• Material - 40 Cr - 4130 - 8630
• Grade - D, D-SM, High-strength
• Diameter - 1⅛ / 1¼ / 1½
• Material - 4140 - 1045 - 25CrMoA
• Grade - 1/2/3 (C/K/D)
• Length - 25'/30'
• Diameter - All sizes 1¼" to 1¾
• Material - 1045 - 4330 - 4142
• Type - Various types available
• Size - 2" / 2½"/ 3"
• Material - PA6 - PPA (Black) - AU (White)
Reliable & Innovative Sucker Rod Products 4
Manufacturer Code Steel Heat Treatment TS (ksi) TS (Mpa)
Yield (ksi) Yield (Mpa)
Elongation 8”, %
Reduction, %
Hardness RC C Mn Mo Cr Ni Cu P S Si V Al
Exceed EH 25CrMoA Induction Case Hardened
144/180 993-1241 - - - - - 0.25/0.28 0.40/0.70 0.15/0.25 0.80/1.10 0.30 Max 0.20 Max 0.025 Max 0.025 Max 0.17/0.37 - -
Exceed EHK 3130 Quenched & Tempered
140/155 965/1068 130 Min 896 Min 11 Min 50 Min 30/35 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Exceed EH7 4330 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.28/0.35 0.70/0.90 0.20/0.30 0.70/0.90 1.65/2.00 0.35 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Exceed EH6 4138 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.38/0.43 0.90/1.50 0.25/0.35 0.55/0.85 0.30 Max 0.35 Max 0.035 Max 0.04 Max 0.20/0.35 0.04/0.09 0.35 Max
Norris 97 4330 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.28/0.35 0.70/1.00 0.20/0.30 0.70/1.00 1.65/2.00 0.35 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 96 4138 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.36/0.45 0.88/1.52 0.25/0.35 0.52/0.88 0.30 Max 0.35 Max 0.035 Max 0.04 Max 0.20/0.35 0.04/0.09 0.35 Max
Tenaris HS+ 1530 Normalized & Surface Quenched
140/160 965/1103 115 Min 793 Min - - 30/36 0.31/0.36 1.40/1.60 0.05 Max 0.2 Max 0.15 Max 0.25 Max 0.025 Max 0.025 Max 0.25/0.40 0.10/0.15 0.01/0.04
Tenaris MMS 4138 Normalized & Tempered
138/155 951/1068 115 Min 793 Min - - 29/35 0.38/0.43 1.10/1.40 0.25/0.35 0.50/0.90 0.30 Max 0.25 Max 0.025 Max 0.025 Max 0.20/0.40 0.04/0.07 0.01/0.07
Tenaris UHS 4330 Normalized & Tempered
140/160 965/1103 115 Min 793 Min - - 30/36 0.30/0.37 0.70/0.95 0.20/0.30 0.80/1.10 1.65/2.00 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 0.035/0.10 0.01/0.06
Weatherford EL SPECIAL Induction Case Hardened
- - - - - - - 0.38/0.42 1.00/1.30 0.24/0.55 0.55/0.85 0.30 Max - 0.035 Max 0.04 Max 0.20/0.35 - -
Weatherford S-88 3130 Quenched & Tempered
140/155 965/1068 130 Min 896 Min 11 Min 50 Min 30/35 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Weatherford T66/XD 4138 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 40 Min 30/34 0.38/0.42 1.00/1.30 0.24/0.32 0.55/0.85 0.30 Max - 0.035 Max 0.04 Max 0.20/0.35 - -
Exceed ED 25CrMoA Quenched & Tempered
126/145 869/1000 - - - - - 0.25/0.28 0.40/0.70 0.15/0.25 0.80/1.10 0.30 Max 0.20 Max 0.025 Max 0.025 Max 0.17/0.37 - -
Exceed D 4142 Normalized & Tempered
120/140 827/965 85 Min 586 Min 10 Min 45 Min 23/31 0.38/0.45 0.80/1.00 0.15/0.25 0.80/1.10 0.45 Max 0.035 Max 0.035 Max 0.15/0.35 - -
Norris 54 1541 Normalized & Tempered
115/140 793/965 85 Min 586 Min 15 Min 50 Min 22/31 0.36/0.45 1.35/1.65 0.06 Max 0.30 Max 0.35 Max 0.35 Max 0.04 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 78 A4142 Normalized & Tempered
120/140 827/965 95 Min 655 Min 10 Min 45 Min 23/31 0.38/0.45 0.80/1.00 0.15/0.25 0.80/1.10 0.45 Max 0.35 Max 0.035 Max 0.035 Max 0.15/0.35 0.02/0.07 0.35 Max
Tenaris D Alloy 4142 Normalized & Tempered
115/140 793/965 85 Min 586 Min - - 22/31 0.40/0.45 0.75/1.00 0.15/0.25 0.80/1.10 0.25 Max 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 - 0.01/0.04
Tenaris D Carbon 1530 Normalized & Forced Cooling
115/140 793/965 85 Min 586 Min - - 22/31 0.31/0.36 1.40/1.60 0.05 Max 0.20 Max 0.15 Max 0.25 Max 0.025 Max 0.025 Max 0.25/0.40 0.10/0.15 0.01/0.04
Weatherford D 4142 Normalized & Tempered
115/140 793/965 100 Min 689 Min 10 Min 45 Min 22/31 0.40/0.45 0.75/1.00 0.15/0.25 0.80/1.10 0.25 Max - 0.035 Max 0.04 Max 0.15/0.30 - -
Weatherford MD 1541 Normalized & Tempered
115/140 793/965 95 Min 655 Min 14 Min 45 Min 22/31 0.40/0.44 1.35/1.55 0.05 Max 0.25 Max 0.25 Max - 0.035 Max 0.04 Max 0.15/0.30 - -
Weatherford S-67 1029 Quenched & Tempered
120/140 827/965 110 Min 758 Min 11 Min 55 Min 23/31 0.22/0.29 1.00/1.32 0.05 Max 0.20 Max 0.15 Max 0.35 Max 0.025 Max 0.04 Max 0.15/0.30 - -
Exceed EKD 3130 Normalized & Tempered
125/140 862/965 115 Min 793 Min 12 Min 55 Min 25/31 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Exceed KD 4330 Normalized & Tempered
120/140 827/965 90 Min 621 Min 10 Min 45 Min 23/30 0.30/0.35 0.60/1.20 0.20/0.30 0.80/1.00 1.65/2.00 0.35 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 90 4320 Normalized & Tempered
120/140 827/965 95 Min 655 Min 10 Min 45 Min 23/31 0.18/0.24 0.80/1.00 0.20/0.30 0.70/.90 1.15/1.50 0.35 Max 0.025 Max 0.025 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 75 4330 Normalized & Tempered
125/140 861/965 100 Min 689 Min 10 Min 45 Min 25/31 0.30/0.34 0.80/1.00 0.20/0.30 0.80/1.00 1.65/2.00 0.035 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Tenaris KD 4320 Normalized & Tempered
115/140 793/965 85 Min 586 Min - - 22/31 0.18/0.25 0.80/1.00 0.20/0.30 0.70/0.90 1.15/1.50 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 0.03/0.07 0.01/0.05
Tenaris D Special 4330 Normalized & Tempered
115/140 793/965 85 Min 586 Min - - 22/31 0.30/0.37 0.70/0.95 0.20/0.30 0.80/1.10 1.65/2.00 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 0.035/0.10 0.01/0.06
Weatherford KD 4720 Normalized & Tempered
115/140 793/965 95 Min 655 Min 14 Min 45 Min 22/31 0.19/0.23 0.85/1.05 0.22/0.30 0.80/1.05 0.90/1.20 - 0.035 Max 0.04 Max 0.15/0.35 - -
Weatherford S-87 3130 Quenched & Tempered
125/140 861/965 115 Min 793 Min 12 Min 55 Min 25/31 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Exceed EH9 00Cr9 Normalized & Tempered
TBD 965/1172 115 Min 793 Min 10 Min 45 Min 30/34 0.035 Max 0.60/1.00 0.20/0.35 9.00/11.00 0.40/0.80 0.30/0.50 0.02 Max 0.005 Max 0.05 Max - 0.006 Max
HIG
H S
TREN
GTH
D G
RA
DE
FOR C
ORRO
SIV
E EN
VIR
ON
MEN
T
*
5 Reliable & Innovative Sucker Rod Products
Manufacturer Code Steel Heat Treatment TS (ksi) TS (Mpa)
Yield (ksi) Yield (Mpa)
Elongation 8”, %
Reduction, %
Hardness RC C Mn Mo Cr Ni Cu P S Si V Al
Exceed EH 25CrMoA Induction Case Hardened
144/180 993-1241 - - - - - 0.25/0.28 0.40/0.70 0.15/0.25 0.80/1.10 0.30 Max 0.20 Max 0.025 Max 0.025 Max 0.17/0.37 - -
Exceed EHK 3130 Quenched & Tempered
140/155 965/1068 130 Min 896 Min 11 Min 50 Min 30/35 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Exceed EH7 4330 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.28/0.35 0.70/0.90 0.20/0.30 0.70/0.90 1.65/2.00 0.35 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Exceed EH6 4138 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.38/0.43 0.90/1.50 0.25/0.35 0.55/0.85 0.30 Max 0.35 Max 0.035 Max 0.04 Max 0.20/0.35 0.04/0.09 0.35 Max
Norris 97 4330 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.28/0.35 0.70/1.00 0.20/0.30 0.70/1.00 1.65/2.00 0.35 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 96 4138 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 45 Min 30/34 0.36/0.45 0.88/1.52 0.25/0.35 0.52/0.88 0.30 Max 0.35 Max 0.035 Max 0.04 Max 0.20/0.35 0.04/0.09 0.35 Max
Tenaris HS+ 1530 Normalized & Surface Quenched
140/160 965/1103 115 Min 793 Min - - 30/36 0.31/0.36 1.40/1.60 0.05 Max 0.2 Max 0.15 Max 0.25 Max 0.025 Max 0.025 Max 0.25/0.40 0.10/0.15 0.01/0.04
Tenaris MMS 4138 Normalized & Tempered
138/155 951/1068 115 Min 793 Min - - 29/35 0.38/0.43 1.10/1.40 0.25/0.35 0.50/0.90 0.30 Max 0.25 Max 0.025 Max 0.025 Max 0.20/0.40 0.04/0.07 0.01/0.07
Tenaris UHS 4330 Normalized & Tempered
140/160 965/1103 115 Min 793 Min - - 30/36 0.30/0.37 0.70/0.95 0.20/0.30 0.80/1.10 1.65/2.00 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 0.035/0.10 0.01/0.06
Weatherford EL SPECIAL Induction Case Hardened
- - - - - - - 0.38/0.42 1.00/1.30 0.24/0.55 0.55/0.85 0.30 Max - 0.035 Max 0.04 Max 0.20/0.35 - -
Weatherford S-88 3130 Quenched & Tempered
140/155 965/1068 130 Min 896 Min 11 Min 50 Min 30/35 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Weatherford T66/XD 4138 Normalized & Tempered
140/150 965/1034 115 Min 793 Min 10 Min 40 Min 30/34 0.38/0.42 1.00/1.30 0.24/0.32 0.55/0.85 0.30 Max - 0.035 Max 0.04 Max 0.20/0.35 - -
Exceed ED 25CrMoA Quenched & Tempered
126/145 869/1000 - - - - - 0.25/0.28 0.40/0.70 0.15/0.25 0.80/1.10 0.30 Max 0.20 Max 0.025 Max 0.025 Max 0.17/0.37 - -
Exceed D 4142 Normalized & Tempered
120/140 827/965 85 Min 586 Min 10 Min 45 Min 23/31 0.38/0.45 0.80/1.00 0.15/0.25 0.80/1.10 0.45 Max 0.035 Max 0.035 Max 0.15/0.35 - -
Norris 54 1541 Normalized & Tempered
115/140 793/965 85 Min 586 Min 15 Min 50 Min 22/31 0.36/0.45 1.35/1.65 0.06 Max 0.30 Max 0.35 Max 0.35 Max 0.04 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 78 A4142 Normalized & Tempered
120/140 827/965 95 Min 655 Min 10 Min 45 Min 23/31 0.38/0.45 0.80/1.00 0.15/0.25 0.80/1.10 0.45 Max 0.35 Max 0.035 Max 0.035 Max 0.15/0.35 0.02/0.07 0.35 Max
Tenaris D Alloy 4142 Normalized & Tempered
115/140 793/965 85 Min 586 Min - - 22/31 0.40/0.45 0.75/1.00 0.15/0.25 0.80/1.10 0.25 Max 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 - 0.01/0.04
Tenaris D Carbon 1530 Normalized & Forced Cooling
115/140 793/965 85 Min 586 Min - - 22/31 0.31/0.36 1.40/1.60 0.05 Max 0.20 Max 0.15 Max 0.25 Max 0.025 Max 0.025 Max 0.25/0.40 0.10/0.15 0.01/0.04
Weatherford D 4142 Normalized & Tempered
115/140 793/965 100 Min 689 Min 10 Min 45 Min 22/31 0.40/0.45 0.75/1.00 0.15/0.25 0.80/1.10 0.25 Max - 0.035 Max 0.04 Max 0.15/0.30 - -
Weatherford MD 1541 Normalized & Tempered
115/140 793/965 95 Min 655 Min 14 Min 45 Min 22/31 0.40/0.44 1.35/1.55 0.05 Max 0.25 Max 0.25 Max - 0.035 Max 0.04 Max 0.15/0.30 - -
Weatherford S-67 1029 Quenched & Tempered
120/140 827/965 110 Min 758 Min 11 Min 55 Min 23/31 0.22/0.29 1.00/1.32 0.05 Max 0.20 Max 0.15 Max 0.35 Max 0.025 Max 0.04 Max 0.15/0.30 - -
Exceed EKD 3130 Normalized & Tempered
125/140 862/965 115 Min 793 Min 12 Min 55 Min 25/31 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Exceed KD 4330 Normalized & Tempered
120/140 827/965 90 Min 621 Min 10 Min 45 Min 23/30 0.30/0.35 0.60/1.20 0.20/0.30 0.80/1.00 1.65/2.00 0.35 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 90 4320 Normalized & Tempered
120/140 827/965 95 Min 655 Min 10 Min 45 Min 23/31 0.18/0.24 0.80/1.00 0.20/0.30 0.70/.90 1.15/1.50 0.35 Max 0.025 Max 0.025 Max 0.15/0.35 0.04/0.09 0.35 Max
Norris 75 4330 Normalized & Tempered
125/140 861/965 100 Min 689 Min 10 Min 45 Min 25/31 0.30/0.34 0.80/1.00 0.20/0.30 0.80/1.00 1.65/2.00 0.035 Max 0.035 Max 0.04 Max 0.15/0.35 0.04/0.09 0.35 Max
Tenaris KD 4320 Normalized & Tempered
115/140 793/965 85 Min 586 Min - - 22/31 0.18/0.25 0.80/1.00 0.20/0.30 0.70/0.90 1.15/1.50 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 0.03/0.07 0.01/0.05
Tenaris D Special 4330 Normalized & Tempered
115/140 793/965 85 Min 586 Min - - 22/31 0.30/0.37 0.70/0.95 0.20/0.30 0.80/1.10 1.65/2.00 0.25 Max 0.025 Max 0.025 Max 0.15/0.35 0.035/0.10 0.01/0.06
Weatherford KD 4720 Normalized & Tempered
115/140 793/965 95 Min 655 Min 14 Min 45 Min 22/31 0.19/0.23 0.85/1.05 0.22/0.30 0.80/1.05 0.90/1.20 - 0.035 Max 0.04 Max 0.15/0.35 - -
Weatherford S-87 3130 Quenched & Tempered
125/140 861/965 115 Min 793 Min 12 Min 55 Min 25/31 0.22/0.29 0.71/1.00 0.05 Max 0.41/0.65 0.70/1.00 0.35 Max 0.025 Max 0.035 Max 0.15/0.35 - -
Exceed EH9 00Cr9 Normalized & Tempered
TBD 965/1172 115 Min 793 Min 10 Min 45 Min 30/34 0.035 Max 0.60/1.00 0.20/0.35 9.00/11.00 0.40/0.80 0.30/0.50 0.02 Max 0.005 Max 0.05 Max - 0.006 Max
* Corrosion Resistant
EXCEED
OILFIELD
EQU
IPMEN
T
Reliable & Innovative Sucker Rod Products 6
Corrosion Resistant EH9 RodFor corrosive wells, other rod manufacturers heavily rely on
additional inhibiting chemical treatment in the well to ensure rod
life. This approach often falls short in environments with high H2S,
CO2 and bacteria concentrations.
After years of research and testing, engineers at Exceed locked-
in a special Chromium Alloy Steel and developed the EH9 Rod.
This new rod is the first on the market to solve issues in wells with
High Corrosion and High Tensile requirements, making it the rod
of choice for the toughest wells.
7 Reliable & Innovative Sucker Rod Products
D Grade rod after 180 days EH9 Rod after 280 days EH9 coupling vs. T Coupling
EXCEED
OILFIELD
EQU
IPMEN
T
EHT RodDove-tail connection for PCPConventional approaches of adopting or modifying traditional sucker rods for PCP applications often fall short in
meeting the higher torque and other unique requirements of PCP. In 2006, engineers at Exceed Oilfield Equipment
started the research and development of a PCP specific rod. The current generation EHT Rod features our patented
locking dove-tail connection and case hardened rod body. Overall, it offers 20-30% higher torque. Customers
who switched to the EHT technology have seen benefits of reduced load, improved operating efficiency, and lower
failure rates.
Smart-Rod To help customers better manage their rod asset and improve
operation efficiencies, Exceed has developed the Smart-Rod
technology. Each Smart-Rod has a RFID chip embedded inside
the rod pin, giving it a unique ID that can be traced throughout
the rod’s life cycle. A handheld reader can conveniently identify
each rod during workover operations and asset management
activities. Rod information collected, combined with the well
database information, can then be used to guide decisions to
confidently reuse, categorize, and locate used sucker rods from
a particular batch reliably and confidently.
Reliable & Innovative Sucker Rod Products 8
EH9 coupling vs. T Coupling
Unwavering CommitmentGlobally, Exceed is supplying to customers in US,
Canada, China, Australia, South America, and the
Mid-East. For the US market, Exceed has setup stocking
locations in West Texas, South Texas, Oklahoma,
California and North Dakota.
Industry Changing InnovationsEvery year, Exceed allocates a significant part of its
budget into developing new products and improving
existing ones. With about 70 technical staff members
in two research labs, Exceed leads the industry with
new products innovations. As of 2015, Exceed has 20
patents granted and 60 pending.
9 Reliable & Innovative Sucker Rod Products
Company Mission StatementExceed Oilfield Equipment manufactures and distributes high quality sucker rod products and accessories for the oil production
industry. We differentiate with innovative products, earn customer trust with integrity and dependability, and compete on the
quality of our products and services. Exceed strives to build healthy long-term relationships with each customer and maintain
a strong presence in the sucker rod market.
Reliable & Innovative Sucker Rod Products 10
EXCEED
OILFIELD
EQU
IPMEN
T
A brief HistoryNine-Ring, Exceed’s parent company, was established in 1984 in China.
Starting in 1994, the company focused all its efforts on manufacturing and
research and development of Sucker Rods. Exceed relied on a stream of
new innovations and relentless effort to improve product quality, earn trust
among customers, and gain market share as the company grows. We quickly
became the dominant sucker rod supplier in China. In 2007, Nine-Ring
moved from the city center to a new manufacturing facility and introduced
the first automated forging production line in China.
In 2012, as the company continued to grow, Exceed Oilfield Equipment
was established as a wholly-owned subsidiary of Nine-Ring to better serve
global customers. Exceed's headquarters is located in Houston, Texas,
with satellite and stocking locations strategically established with sales and
service teams in the major producing fields. Exceed has become a new
global brand name.
To meet the global demand potential, the 2nd manufacturing facility opened
in 2015. Two additional automated forging lines were added along with a
state of the art automated threading line. With these new additions, Exceed
has become the largest sucker rod manufacturer in the world.
1-800-385-5777 | www.eoe-inc.com
©20
11-2
015
Exce
ed O
ilfiel
d Eq
uipm
ent I
nc. A
ll rig
hts
rese
rved