www.neoptix.com
Fiber Optic Temperature Sensors
Neoptix, Inc.1415 Frank-Carrel, suite 220Québec (Québec) G1N4N7 CanadaPhone : (418) 687-2500Fax : (418) [email protected]
The Neoptix TWP tank wall plate is specifically designed for installation onto your power transformer tank wall. It has to be mated with our OFT optical feedthroughs.
As a standard item, the TWP is made out of cold finished 1018 steel (ASTM A108). If needed, it can also be manufactured using any other material, including stainless steel 316.
The tank wall plate accommodates from 1 to 16 optical feedthroughs and is supplied with plugs to close unused holes. It comes standard with 1/4 NPT ANSI threads. ISO threads are also available.
The TWP can be welded directly on the tank wall. It can be delivered with two tapered 10-24 UNC holes for clamping the TWP during welding process. The tank wall plate is also available upon request with eight unthreaded holes for direct bolting, with gasket or O'Ring, onto the tank wall.
The Neoptix tank wall plate can also be supplied with the necessary threaded holes for a direct mounting of the Neoptix JBox protective enclosure. This unique junction box let you saved precious time and ressources to achieve a complete fiber optic installation.
Each NPT hole is numbered on both sides of the plate using a deep engraving technique allowing perfect reading of numbers even after being painted. Moreover, both interior and exterior sides are engraved.
Neoptix has a bank of CAD drawings of many different models of Tank Wall Plates that can fulfill your needs. Contact Neoptix for more details.
Key Features
Transformer tank wallmounting plate for Neoptix
optical feedthroughs
• Up to 16 feedthroughs on the same TWP plate
• 1/4 NPT ANSI• Made of carbon or
stainless steel• Can be welded or bolted
• Can be custom madeupon specifications
TWP Transformer tank wall mounting plate
Bolted stainless steel 316 version
Neoptix inc.1415 Frank-Carrel, suite 220
Québec (Québec) G1N 4N7 CanadaPhone : (418) 687-2500
Fax : (418) [email protected]
www.neoptix.com
Technical Specifications
Dimensions:
Product Name :
Number of feedthroughs :
Dimension :
Material :
Mounting methods:
Mounting clamps :
NPT Type :
Compatibility :
Ordering codes:
(Other dimensions, material and feedthrough number available)
TWP - Tank Wall Plate
Available with up to 16 NPT-F
Standard: Ø10 inches, 0.5 inch thicknessOptional: Any other dimensions and feedthrough density as per your specifications
Standard: Cold Finished 1018 Steel (ASTM A108)Optional: Other material such as Stainless Steel
Standard: Direct welding onto tank wallOptional: Bolting threads with or without recess for gasket (32 rms)
Standard: noneOptional: Tapered 10-24 UNC holes (2x) for clamping
Standard: NPT 1/4-18, ANSI threads
Compatible with Neoptix OFT optical feedthroughs (Also compatible with Nortech-Fibronic, Inc. products)
Ø 10.000 [254.00 mm]
Ø4.596 [116.74 mm]Ø6.000 [152.40 mm]
Ø2.000 [50.80 mm]
.500 [12.70 mm]
1/4-18 NPTansi threads
12 x
Printed in Canada/Imprimé au Canada - v1041r7
TWP- -M -D
Number of OFT:1 = 1 feedthroughn = n feedthrough12 = 12 feedthrough
Junction box holes:0 = No (standard)1 = Yes (optional)
Material:0 = Carbon steel (Standard)
1 = Stainless steel (optional)2 = Aluminum (optional)
3 = Other
-F -J
Fastening:0 = Welded (standard)1 = Bolted without O’Ring groove (optional)2 = Bolted with O’Ring groove (optional)
Diameter:10 = 10 inches (standard)12 = 12 inches (optional)n = other diameter
www.qualitrolcorp.comNeoptix, Inc. is a Qualitrol company