Remediation Process Sahara Corrosion Cleaning System.

Remediation ProcessRemediation Process

Sahara Corrosion Cleaning SystemSahara Corrosion Cleaning System

What are the current corrosion issues?What are the current corrosion issues?Disinfectant Residue on 316L Stainless Steel, Electropolish Stainless Steel, & Windows that impact facility appearance for audits.

Rust on tanks and load cells, also an issue for facility audits.

Current Solution to Remediate Current Solution to Remediate Corrosion/Rust …AcidCorrosion/Rust …Acid

ProsPros• Cleans stainless steel before

an audit.

ConsCons• Residue & Stains come back in

weeks!!!• Mixing the chemicals • Employees having to deal with

acid, and risk of injury• PPE to be worn for protection. • EH&S would rather have a safe

way of remediating stains & rust

• Requalification of equipment the acid was used on.

Foamtec’s Solution…Foamtec’s Solution…Sahara Corrosion Cleaning System

& MiraWIPES®Features

• Diamond ScrubPADS that only use WaterWater to remove stains on 316L & 304 Stainless Steel.

• Quickly removes the stains, buffs the stainless steel to a RA of 10.

• Microfiber wiper, Microfiber wiper, MiraWIPE® will keep the stainless steel clean with IPA for months!!!

Benefits• No acid, no required PPE, no

mixing chemicals, no risk of injury.

• Stainless steel will be allowed to self-passivate and stay clean.

• Audit ready any day!

Stainless Steel Sahara Corrosion Cleaning System for Large Surfaces: Stainless Steel Sahara Corrosion Cleaning System for Large Surfaces: (What We Used on the Tank & Autoclave)(What We Used on the Tank & Autoclave)

2 Handles, 10 Diamond ScrubDISKS® (5 grits), 1 Silicone-Carbide ScrubDISK®, 1 PillowWIPE®, 4 ScrubPADS (1 of each 4 grits), 1 Silicon-Carbide ScrubPAD, ScrubWRIGHT® Pen with 2

ScrubBELTS ®, 25 MiraWIPE® Wipers, 2 UltraSOLV® Sponges, and Flash Drive with Instructional Videos

Automated Equipment

Automated Equipment Accessories

Automated Equipment Accessories

Foamtec’s Results:Foamtec’s Results:

Using our Sahara Corrosion Cleaning System with Water & IPA

UltraSOLV® Sponge 280 Grit Diamond ScrubPAD

1350 Grit Diamond ScrubPAD 1500 Silicon Carbide ScrubPAD ScrubWRIGHT® Pen 280 Grit

MiraWIPE® 9x9 Microfiber Wiper10 min to clean

Load CellLoad Cell

BeforeBefore AfterAfter

Cross Bar on Load Cell Cross Bar on Load Cell


UltraSOLV® Sponge280 Grit Diamond ScrubPAD

1350 Grit Diamond ScrubPAD1500 Silicon Carbide ScrubPAD, MiraWIPE®

9x9 Microfiber Wiper5-6 min to clean

Mixing Tank 316L StainlessMixing Tank 316L Stainless


UltraSOLV® Sponge 280 Grit Diamond ScrubPAD1350 Grit Diamond ScrubPAD

1500 Silicon Carbide ScrubPADMiraWIPE® 9x9 Microfiber Wiper 20-30 min to clean cylinder of tank

Tank LidTank Lid



1350 Grit Diamond ScrubPAD1500 Silicon Carbide ScrubPAD

MiraWIPE® 9x9 Microfiber Wiper

NOTE: The 360 Grit removed the rust, but would need the 280 Grit to remove ingrained stains.

Load CellLoad Cell




ScrubWRIGHT® Pen 280 Grit ScrubBELT® MiraWIPE® 9x9 Microfiber Wiper

10 min to clean

Control PanelControl Panel





AutoclaveAutoclave





Autoclave DoorAutoclave Door





Autoclave PanelAutoclave Panel




MiraWIPE® 9x9 Microfiber Wipe

NOTE: The 280 Grit was needed to remove the ingrained streaking residue.

AutoclaveAutoclave





Electropolish PanelElectropolish PanelUsing Polyester Mesh Wipe &

70% AlcoholUsing Microfiber Mesh Wipe &

70% Alcohol

NOTE: Using a mesh wrapped polyester wiper – the contamination was not removed and the stain remained. Using Microfiber Mesh combo – Microfiber remediated the entire stain. RECOMMENDATION: PharmaMOP® with Mesh/Microfiber Mop head or UltraMOP® III with hybrid Microfiber/Poly Blend.

Recommendations for Removal of Recommendations for Removal of Contaminates on Electropolish SteelContaminates on Electropolish Steel

All versions of the UltraMOP® III are Lot certified and designed to fit GEERPRES® and Contec wall washing mop frames.

All versions of the UltraMOP® III are compatible with Gamma, EtO and autoclave sterilization.

All mops are Lot traceable back to raw materials. Packaging: 4/Bag, 8 Bags/Case

Part Numbers Description Lamination Length

FS700 UltraMOP® III Polyester 7" / 17.8cm

FS700ST UltraMOP® III, Sterile Polyester 7" / 17.8cm





FS703 UltraMOP® III Microfiber 7" / 17.8cm

FS703ST UltraMOP® III, Sterile Microfiber 7" / 17.8cm





UltraMOP® III Clean Room MopRefills

MiraWIPE®MiraWIPE®• How do I keep the stainless steel from re-rusting and How do I keep the stainless steel from re-rusting and

corroding again in weeks?corroding again in weeks?

• SOLUTION: Foamtec MiraWIPE® Microfiber WiperSOLUTION: Foamtec MiraWIPE® Microfiber Wiper

Poly vs. Microfiber Characteristics

Star-shaped microfiber traps and removes particles; where standard Polyester round fibers push particles around

A tighter bundle means better pick up, greater absorbency, and superior abrasion resistance

The microfiber 1-2um star-shape characteristic is able to reach into the micro scratches on all surfaces.

Giving the microfiber the ability to remove the sub .2um particles gathered within micro scratches.

Contaminants, soil and even Bleach residue can be lifted by the microfiber wipe.

How the Microfiber MiraWIPE® works

Microfiber

Results from Using MiraWIPE®Results from Using MiraWIPE®BeforeBefore

9 Months later after using Sahara Corrosion Cleaning System and MiraWIPES® once a

week with IPA.

AfterAfterCorrosion due to Bleach residues before

remediation.

Date post:	26-Dec-2015
Category:	Documents
Upload:	abner-merritt
View:	236 times
Download:	2 times

Remediation Process Sahara Corrosion Cleaning System.

Documents