REMOTE EQUIPEMENT RENTAL LIST 2012

Magonafilm SrlVia Magona Snc57023 Cecina (Li) ItalyTel. 0586-632142Cell 338-8160531Fax 0586-635039www.magonafilm.itPowered By Cinenane Group

TRUSS RAIL

Truss Dolly can be rigged vertically, horizontally and upside down, locking to trusses.

The system is equipped with internal rope transmission.

Maximum speed: 25 Km/h, optional 40 km

Power requirements: 220 V AC 50 Hz or 380 V AC 50 Hz

Maximum Payload Dolly: 100 kg

Truss Distributed Load: 900 kg

Truss Deflection: 24 mm

Dolly Empty weight: 19 kg

Track Empty weight: 5 kg/mt

Dimensions of Truss: L 200 x W 29 x H 29 cm

BASIC Configuration:

Dolly + Rail 10 mt - Pedestal/Anchor base - Pedal controlled

COMBI DOLLY

Combi Dolly can be used without column

Maximum speed: 25 Km/h optional 40 km/h

Power requirements: 220 V AC 50 Hz

Maximum payload: 200 kg

Dolly empty weight: 32 kg

Track empty weight: 32 kg

Total height (Dolly+Track): 70 cm

Dimension: L 75 x W 50 x H 25 cm.

BASIC Configuration:

Combi Dolly + Straight Track 10 mt – Pedal controlled

COMBI SYSTEM

Combi System can be used with column

Power requirements: 220 V AC 50 Hz

Mount: Euro Adapter

Maximum payload: 100 kg

Column empty weight: 35 kg

Column max speed: 25 mm/sec

Column lift range: 68 cm

Total height (Dolly+Column+Track): 140 cm (with Mini Gyro Head)

Dimension: L 75 x W 50 x H 25 cm

BASIC Configuration:

Combi Dolly + Combi Column + Straight Track 10 mt - Pedal controlled

LIFT RAIL

Lift Rail can be used in vertical position, is versatile and compact

Power requirements: 220 V AC 50 Hz

Mount: Euro Adapter , Jimmy adapter

Maximum payload with remote head: 30 kg

Maximum Lift: 9 mt. (each reail unit is 3 mt., 3-6-9 mt)

Max speed lift: 500 mm/sec

Total height : approximately 9 mt., depending on head

Dimension: L 300/600/900 x W 18 x H 7 cm

Weight: 25 kg

BASIC Configuration:

Lift Rail 3 mt - Pedal or Joystick controlled

SLISA+COMAT SYSTEM

Slisa Rail + Comat Remote Head can be rigged horizontally and upside down.

The system is equipped with inside special alluminium rail with electrical and rope transmission.

Maximum speed: 25 Km/h

Power requirements: 220 V AC 50 Hz

Maximum payload Comat Remote Head: 15 kg

Distributed Load: 200 kg

Total Empty Comat Remote Head weight: 4 kg

Track Empty weight: 1 kg/mt

Dimensions of Truss: L 100/200/300 x W 12 x H 3 cm

BASIC Configuration:

Slisa Rail 10 mt + Comat Remote Head - Pedal or Joystick controlled

FAST ‘N’ FLAT

Fast and Flat can be rigged horizontally - the system is equipped with inside special speed wheels and

Flat Remote Head. Ideal for low size cameras

Maximum speed: 80 km/h

Power requirements: 220 V AC 50 Hz

Maximum Payload Dolly: 80 kg

Truss Distributed Load: 900 kg

Truss Deflection: 24 mm

Dolly Empty weight: 1 kg

Track Empty weight: 6 kg/mt

Dimensions of Folding Track: L 200 x W 40 x H 5 cm

BASIC Configuration:

Fast’n’Flat Remote Head + FastRail 10 mt - Anchor base - Pedal or Joystick

PANTHER REMOTE BTV

Panther Remote Broadcasting TV with motor and controls for camera broadcasting

Dolly: Panther MS III (Technical Data of Panther GmBh)

Maximum speed: 25 km/h

BASIC Configuration:

Panther Remote BTV (including Panther Dolly )+ Straight Track 10 mt - Joystick

SOCCER DOLLY

Remote Dolly ideal for sports with cameraman and dolly operator on board

Maximum speed: 40 km/h

BASIC Configuration:

Soccer Dolly + Straight Track 50 mt – Joystick controlled

TELESCOPIC JIB T 24

Telescopic LLC's Techno-Jib Telescoping Jib Arm represents the next step in the evolution of the camera

jib. Industry veterans created the Techno-Jib to offer the highest quality, most versatile and user-

friendly jib available. With its ability to maneuver into inaccessible areas, and to smoothly, silently and

quickly move in and out of a shot, the Techno-Jib permits innovative and creative shots that have

previously been considered too expensive or technically challenging. Te

Maximum height 25 feet 7.6 metres

Maximum reach 24 feet 7.3 metres

Minimum reach 9 feet 2.7 metres

Minimum total arm length 15.5 feet 4.7 metres

Maximum speed (telescopic movement) 5 feet/second

Maximum load 48 lbs 21.3 kilograms

Weight of arm 430 lbs 200 kilograms

BASIC Configuration:

Telescopic Jib T 24 complete with Jimmy Jib remote Head

MOVIEBIRD 30

MovieBird Crane has been develop with many unique and ingenious feature:

• A crane that is affordable for all types of TV and Film Productions

• A telescopic crane that runs fast and quieter

• A telescopic crane system that take less time to set up and is easier to use

• A lighter and more rigid telescopic crane arm for those long lens shots

Maximum height 33 feet 10 metres

Maximum reach 30 feet 9.1 metres

Minimum reach 7 feet 2.1 metres

Minimum total arm length 15.5 feet 4.7 metres

Maximum speed (telescopic movement) 1.8 metres/sec

Maximum load 165 lbs 70 kilograms

Weight of arm 3300 lbs 1500 kilograms

BASIC Configuration:

Moviebird 30 without Remote Head

MAXI GYROHEAD

MAXI GYROHEAD is the hardware heart of Piuma System. It performs 3 axes connected to computer

driven motor gears. All movements can be programmed and repeated. MAXI GYROHEAD allows

unlimited and totally controlled rotation on each axis. Movement transmission has no backlash. Slip-ring

contacts are in gold and they bear no interference of signal.

Pan, Tilt, Roll: unlimited

Maximum speed: 120°/sec

Power requirements: 48 V DC

Mount: Mitchell

Maximum payload: 50 kg

Empty weight: 39,5 kg

Dimension: L75 x W20 x H100 cm

BASIC Configuration:

Maxi Gyrohead - joystick controlled + CMOTION software (Lens Control System

apart)

MINI GYROHEAD

MINI GYROHEAD is the hardware heart of Piuma System. It performs 3 axes connected to computer

driven motor gears. All movements can be programmed and repeated. Mini Gyrohead's compact

dimensions and light weight make it a perfect tool for TV theatres, live sets and light and fast to rig

dollies.

Pan: unlimited

Tilt: +230° / -30°

Roll: 135°

Maximum speed: 120°/sec

Power requirements: 48 V DC

Mount: Mitchell

Maximum payload: 30 kg

Empty weight: 28 kg

Gyro-stabilization: Yes

Dimension: L70 x W19 x 110 cm

BASIC Configuration:

Mini Gyrohead - joystick controlled + CMOTION software (Lens Control System

apart)

PIUMA SPINHEAD SPH

Spinhead Piuma Remote System is a product by Piumaworld. It is basically an open interface (both

hardware and software) designed to integrate with Cartoni Spinhead – making it a new thing - everytime

a lightweight, cost-effective remote head is requested on stage. The Customer will be able to decide

which elements are needed and add later future developments or new software and hardware.

Pan, Tilt, Nodal: 360°, Fluid Drag continuos 135°

Maximum speed: 45°/sec

Power requirements: 600 W 220 V AC

Mount: Mitchell

Maximum payload: 18 kg

Empty weight: 16 kg

Temperature Operating Range: - 30 + 50 °C

Dimension: base 30x36 cm, H 63 cm underslung, 50 cm on tripod

BASIC Configuration:

Piuma SPH - joystick controlled + CMOTION software (Lens Control System apart)

ACCESSORIES

CMOTION Lens Control Unit €. 500,00

Truss Rail each piece 2 metres €. 100,00

Slisa Rail each metre €. 30,00

Combi Straight Track each metre €. 20,00

Combi Curved 45° ( diam. whole circle 620 cm) €. 30,00

Hydrogenum Power 12-24-48-70 V CC €. 300,00

Hand Weels €. 300,00

Desktop Cart €. 100,00

GALLERY

Combi Rail + Piuma SPH + Straight Tracks Slisa Rail + Comat Remote Head

Combi Dolly UP Version + Mini GyroHead Combi Column + Mini GyroHead

Telescopic Jib T24 + Lift Rail 6 mt Maxi GyroHead on special customized rig