1
FTSK2 REMOTE FUEL SYSTEM This option provides the automatic transfer of fuel from a bulk fuel tank that is located higher than the basetank. The fuel is gravity fed from the bulk tank to the basetank. When set to automatic, low fuel level in the . r o s n e s l e v e l l e u f e h t y b d e s n e s s i k n a t e s a b The DC motorised valve is opened and fuel is allowed to flow from the high level bulk tank by the force of gravity. To help ensure that clean fuel reaches the engine, fuel from the bulk tank . e v l a v d e s i r o t o m e h t o t r o i r p t s u j d e n i a r t s s i When the basetank is full, as sensed by the fuel level sensor, the motorised valve is closed. Any overflow into the basetank or overpressure in the basetank will flow back to the bulk tank via the extended vent. SYSTEM REQUIREMENTS ● High level bulk tank (item 1)* ● Control panel (item 2) ● DC motorised fuel valve (item 3) ● Fuel level switches in the basetank (item 4) ● Extended vent/return line (continuous rise) on the basetank (item 5)* ● Fuel supply line (item 6)* ● Fuel strainer (item 7) ● Isolating valve at the bulk tank (item 8)* ● Level gauge (item 9) *Not included HEIGHT RESTRICTION BETWEEN BASETANK AND BULK TANK A – Pressure head on basetank ● Distance ‘A’ limited to 1.4 metres for all metal tank bases except for models GEP400-4 – GEP750-1 where 'A' can be increased to 3.7 metres. Information contained in this publication may be considered confidential. www.CAT-ElectricPower.com Market: International Discretion is recommended when distributing. Materials and specifications are subject to change without notice. © 2008 Caterpillar LEHF1160-07 (11/08) CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow", as well as corporate and product All rights reserved. identity used herein, are trademarks of Caterpillar and may not be used without permission. Printed in U.S.A. 278-687 A 9 4 7 3 2 6 8 1 5 Floor Level M Exclusively from your Caterpillar ® dealer
