+ All Categories
Home > Documents > REMS pressing tongs Accessories for REMS radial … pressing tongs/pressing rings with pressing...

REMS pressing tongs Accessories for REMS radial … pressing tongs/pressing rings with pressing...

Date post: 11-Feb-2019
Category:
Upload: lamphuc
View: 224 times
Download: 0 times
Share this document with a friend
21
REMS pressing tongs REMS pressing rings Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes ZVSHK Hold-Harmless and Indemnification Agreement See page 178. Confirmation of suitability See page 177. for all common pressfitting systems Select REMS pressing tongs/ REMS pressing rings yourself! Find the desired press fitting system in the table below and choose the size of pressing tongs/pressing rings that you require. Please note that pressfitting systems for gas installation may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Intermediate tongs (page 176) are necessary for driving the REMS pressing rings (PR). Highly durable pressing tongs/pressing rings made of tenacious, specially hard- ened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs/ pressing rings manufactured on CNC production centres ensure high-precision machining of pressing contour. Low production tolerances as a result. Drive through all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC and REMS Mini-Press S 22 V ACC) and suitable radial presses of other makes. All pressing tongs marked with * have an optional connection (Patent DE 101 01 440, Patent EP 1 223 008, Patent US 6,739,172) for manual drive through the radial press REMS Eco-Press. Read and follow the installation and assembly instructions of the system provider/manufacturer. REMS pressing tongs REMS pressing tongs with 2 swivellable monoblock pressing jaws. Most sold standard version. REMS ACz, Fz, RFz, RFIz, VMPz pressing tongs with teeth prevent formation of burr on the pressing sleeve (Patent EP 2 027 971). REMS pressing tongs (4G) REMS pressing tongs (4G) with two pivoted, parallel aligned pressing segments for linear pressing of midsize dimensions. REMS pressing tongs (S) REMS pressing tongs (S) with one fixed and two pivoted pressing segments, for midsize dimensions. REMS VMPz pressing tongs with teeth prevent formation of burr on the pressing sleeve. REMS pressing rings (PR-3S) REMS pressing ring (PR-3S) with 3 pressing segments, 2 swivel guided, for large dimension complex pressings. Ideal pressing through radially controlled movement of pressing segments, with adapter tongs. REMS pressing rings (PR-3B) REMS pressing rings (PR-3B) with 3 pressing segments for high quality, large dimension pressings Optimum pressing by radially controlled movement of the pressing segments with adaptor tongs. REMS VAUFz, VFz, VMPz, VUSFz pressing rings with teeth prevent formation of burr on the pressing sleeve. REMS pressing rings 45° (PR-2B) REMS pressing ring 45° (PR-2B), with 2 pressing jaws, for secure engagement of the pressing jaws in places of difficult access by 45° inclination (Patent EP 2 774 725). Drive with adapter tongs. Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour F, M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process. With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas. REMS pressing tongs (S) REMS pressing rings (PR-3B) with 2 swivellable monoblock pressing jaws. Most sold REMS pressing tongs (4G) REMS pressing rings (PR-3S) REMS pressing rings 45° (PR-2B) Patent EP 2 774 725 German Quality Product Patent DE 101 01 440 1 01 440 Patent EP 1 223 008 Patent US 6,739,172
Transcript

156

REMS pressing tongsREMS pressing rings

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

ZVSHK

Hold-Harmless and Indemnifi cation AgreementSee page 178.

Confi rmation of suitability See page 177.

for all common pressfi tting systems

Select REMS pressing tongs/ REMS pressing rings yourself!Find the desired press fi tting system in the table below and choose the size of pressing tongs/pressing rings that you require. Please note that pressfi tting systems for gas installation may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Intermediate tongs (page 176) are necessary for driving the REMS pressing rings (PR). Highly durable pressing tongs/pressing rings made of tenacious, specially hard-ened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond with the respective pressfi tting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs/pressing rings manufactured on CNC production centres ensure high-precision machining of pressing contour. Low production tolerances as a result. Drive through all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC and REMS Mini-Press S 22 V ACC) and suitable radial presses of other makes. All pressing tongs marked with * have an optional connection (Patent DE 101 01 440, Patent EP 1 223 008, Patent US 6,739,172)for manual drive through the radial press REMS Eco-Press. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS pressing tongsREMS pressing tongs with 2 swivellable monoblock pressing jaws. Most sold standard version. REMS ACz, Fz, RFz, RFIz, VMPz pressing tongs with teeth prevent formation of burr on the pressing sleeve (Patent EP 2 027 971).REMS pressing tongs (4G)REMS pressing tongs (4G) with two pivoted, parallel aligned pressing segments for linear pressing of midsize dimensions.

REMS pressing tongs (S)REMS pressing tongs (S) with one fi xed and two pivoted pressing segments, for midsize dimensions. REMS VMPz pressing tongs with teeth prevent formation of burr on the pressing sleeve.

REMS pressing rings (PR-3S)REMS pressing ring (PR-3S) with 3 pressing segments, 2 swivel guided, for large dimension complex pressings. Ideal pressing through radially controlled movement of pressing segments, with adapter tongs.

REMS pressing rings (PR-3B)REMS pressing rings (PR-3B) with 3 pressing segments for high quality, large dimension pressings Optimum pressing by radially controlled movement of the pressing segments with adaptor tongs. REMS VAUFz, VFz, VMPz, VUSFz pressing rings with teeth prevent formation of burr on the pressing sleeve.

REMS pressing rings 45° (PR-2B)REMS pressing ring 45° (PR-2B), with 2 pressing jaws, for secure engagement of the pressing jaws in places of diffi cult access by 45° inclination (Patent EP 2 774 725). Drive with adapter tongs.

Traceability according to EN 1775:2007REMS pressing tongs/pressing rings with pressing contour F, M, V, SA, B, RN and UP have worked a specifi c marking into the pressing contour which leaves a lasting impression on the pressed fi tting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfi t connection even after the pressing process. With this traceability REMS fulfi ls the recommendations of the European standard EN 1775:2007 for the installation of pressfi tting systems for gas.

REMS pressing tongs (S)

REMS pressing rings (PR-3B)

with 2 swivellable monoblock pressing jaws. Most sold

REMS pressing tongs (4G)

REMS pressing rings (PR-3S)

REMS pressing rings 45° (PR-2B) Patent EP 2 774 725

German Quality ProductGerman Quality Product

Patent DE 101 01 440Patent DE 101 01 440Patent EP 1 223 008Patent US 6,739,172

157

REMS pressing tongsREMS pressing rings

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

Pressing tongs with teethPatent EP 2 027 971

Example REMS pressing tongs M: ”M” imprint on pressed fi tting for traceability according to EN 1775:2007

ACz

Fz

KI

RN

US

VPVMPVMP

ECI

HA

PF

THL

VFz

VUS

FTB

K

RFz

UP

VIC

VX

B

G

M

SA

V

VR

C

H

MT

TH

VAU VAUFz

VMPzVMPz

VRX

F

HE HEz

RFIz

U

VG

VUSFz

158

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

AAC-FIX PRESS H 12* 570300(Global Piping H 16* 570320Systems) H 20* 570350

H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785VX 16* 571635VX 20* 571640

AC-FIX RFz 16* 571325PRESS DUO RFz 20* 571330(Global Piping RFz 25 571335Systems) RFz 32 571340

TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

AC-FIX H 16* 570320PRESS-MULTI H 18* 570340(Global Piping H 20* 570350Systems) H 25* 570360

H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

ACOME H 16* 570320ACOPEX ALU H 20* 570350

H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

ACOME MT ACz 12* 572642ACz 16* 572644ACz 20* 572646ACz 25 572648

AHLSELL M 12 570100A-press M 15 570110elförzinkad M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

AHLSELL V 12 570107A-press koppar V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

AHLSELL M 15 570110A-press rostfritt M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

AIRBEL M 15 570110PRESSCLIM M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

AIRBEL M 15 570110SERTINOX M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

ALB TH 16* 570460Sistema Multicapa TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790

ALB TH 16* 570460Sistema Multicapa TH 20* 570470Gas TH 26* 570475

TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

APE Serie AP B 16* 570850B 20* 570860B 26 570870B 32 570880H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

APE Serie AP TH 16* 570460Gas TH 20* 570470

TH 26* 570475TH 32 570480

AQUATECHNIK B 16* 570850Universal B 20* 570860

B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775C 26* 570750U 32 570785

ARKA H 16* 570320DUROsystem H 20* 570350

H 25* 570360H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

ASCHL NIR M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

ASSOTHERM M 15 570110IPC-RAC M 18 570120Carbon Steel M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

ASSOTHERM M 15 570110IPI-RAX M 18 570120Inox M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

ASSOTHERM H 16* 570320IPM-Multistrato H 20* 570350

H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775C 26* 570750U 32 570785

REMS pressing tongsREMS pressing rings

159

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.ASSOTHERM M 15 570110IPR-RRA M 18 570120Copper M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

ASSOTHERM M 15 570110IPR-RRA M 18 570120Copper Gas M 22 570130

M 28 570140M 35 570150M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

ASTM F 1807 US ⅜"* 571450(Fittings with US ½"* 571455Copper Crimp US ¾"* 571460Ring for PEX US 1"* 571465tubing) US 1 ¼" 571470

US 1 ½" 571475US 2 ” 571477

BBampi BALPEX TH 16* 570460(serie MP) TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

Bampi BALPEX TH 16* 570460Gas TH 20* 570470

TH 26* 570475BARBI H 12* 570300EASYPRESS H 16* 570320(Industrial Blansol) H 20* 570350

H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785

BARBI H 14* 570310MULTIPEX H 16* 570320(Industrial Blansol) H 18* 570340

H 20* 570350H 25* 570360H 26* 570370H 32 570380RFz 16* 571325RFz 18* 571327RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S)U 63 (S) 572365

BEGETUBE/ B 14* 570845IVAR B 16* 570850

B 18* 570855B 20* 570860B 26 570870B 32 570880Fz 40 570742Fz 50 570747F 63 (S) 572385Fz 75 (PR-3B)Fz 75 (PR-3B)3) 572830

BRASELI TH 16* 570460GPF GAS TH 20* 570470

TH 25* 570495TH 32 570480

BRASELI RFz 16* 571325Pressfi tting PE-X RFz 20* 571330

RFz 25 571335RFz 32 571340

BRASELI U 16* 570765Pressfi tting U 18* 570770Multicapa U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795

Brass Form H 16* 570320Master Press H 18* 570340

H 20* 570350TH 16* 570460TH 18* 570465TH 20* 570470U 16* 570765U 18* 570770U 20* 570775

Brass & Fittings RFz 16* 571325PRESSMAN MultiPress RFz 18* 571327

ACz 20* 572646RFz 25 571335RFz 32 571340

Brass & Fittings RFz 16* 571325PRESSMAN RetiPress RFz 18* 571327

ACz 20* 572646RFz 25 571335RFz 32 571340

BRASSTECH B 16* 570850MULTItermoSAN B 20* 570860Brasspress B 26 570870

B 32 570880F 16* 570717F 20* 570727F 26* 570730F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554H 16* 570320H 18* 570340H 20* 570350H 26* 570370TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785

CCello Products VUS ½" (OD 15,9 mm) 571770>B< Press VUS ¾" (OD 22,2 mm) 571775

VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm)VUS 2" (OD 54,0 mm) 571795

CHIALI TH 16* 570460CHIALIPEX TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Climatek TH 14* 570455Clima Therm TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480H 40 A (4G) 570695

Climatrix H 16* 570320Climatrix Rhinopex H 20* 570350

U 16* 570765U 20* 570775TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480

ClouSet TH 16* 570460TH 18* 570465TH 20* 570470

Comap RFz 12* 571320PEX Press RFz 16* 571325

RFz 20* 571330RFz 25 571335

Comap TH 14* 570455Multiskin TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Comap TH 16* 570460Multiskin Gas TH 20* 570470

TH 26* 570475THL 32 570487

COMISA TH 14* 570455Press System TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

COMISA TH 16* 570460Press System Gas TH 20* 570470

TH 26* 570475TH 32 570480

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

160

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.CONEL F 16* 570717CONNECT F 20* 570727MULTI F 26* 570730

F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(DN 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925

DDIWAsystems TH 14* 570455

TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

DUOFIL U 16* 570765MKSYSTEM U 18* 570770

U 20* 570775U 25* 570780U 32 570785

DW Verbundrohr U 16* 570765multitubo systems U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828

EEBRILLE U 16* 570765Isomonfl ex U 18* 570770

U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785

EBRILLE U 14* 570760Monfl ex U 16* 570765

U 18* 570770U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828

EFFEBI M 15 570110PRESSTIGE M 18 570120

M 22 570130M 28 570140M 35 570150M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

EFFEBI TOF-GAS TH 16* 570460MULTIPINZA TH 20* 570470

TH 26* 570475TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775U 32 570785

EFFEBI TOF TH 16* 570460MULTIPINZA TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570717F 18* 570720F 20* 570727F 26* 570730F 32 570735Fz 40 570742Fz 50 570747F 63 (S) 572385F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

EFIELD U 16* 570765MULTILAYER PRESS U 18* 570770DINGAS U 20* 570775

U 25* 570780U 32 570785

EFIELD U 16* 570765MULTILAYER PRESS U 18* 570770WATER U 20* 570775

U 25* 570780U 32 570785

Elkhart VUS ½" (OD 15,9 mm) 571770APOLLOXPRESS VUS ¾" (OD 22,2 mm) 571775Fittings Copper VUS 1" (OD 28,6 mm) 571780and Low-Lead VUS 1¼" (OD 34,9 mm) 571785Brass VUS 1½" (OD 41,3 mm) 571790

VUS 2" (OD 54,0 mm) 571795Elkhart VUSFz 2½" (PR-3B)3) 572819APOLLOXPRESS (OD 66,7 mm)LD-C Fittings VUSFz 3" (PR-3B)3) 572820Copper (OD 79,4 mm)

VUSFz 4" (PR-3B)3) 572821(OD 104,8 mm)

EMMETI B 16* 570850GERPEX- B 20* 570860FIVPRESS B 26 570870

B 32 570880H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

EMPUR TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 20* 570470TH 25* 570495

EURACCORDI M 15 570110SYCPRESS M 18 570120STAINLESS M 22 570130STEEL PRESS M 28 570140FITTINGS M 35 570150

M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

EURACCORDI M 15 570110SYCPRESS M 18 570120CARBON STEEL M 22 570130PRESS FITTINGS M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

EUROTUBI M 12 570100EUROPA M 15 570110C-Steel Pressfi tting M 18 570120System M-Profi le1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

EUROTUBI M 15 570110EUROPA M 18 570120Inox Pressfi tting M 22 570130System M-Profi le1) M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

Evans VAU 15 (½") 572687Components VAU 20 (¾") 572689Presslok VAU 25 (1") 572691

ECI 1½" 571932ECI 2" (4G) 571934ECI 2½" XL (PR-3S)3) 7) 579104ECI 3" XL (PR-3S)3) 7) 579105ECI 4" XL (PR-3S)ECI 4" XL (PR-3S)3) 7) 579106

FFAR Rubinetterie TH 14* 570455PRESSFAR TH 16* 570460

TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S)U 63 (S) 572365

F.B.Q. BARONIO V 12 570107BQ press V 14 570112

V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 14 45° (PR-2B)3) 574532V 15 45° (PR-2B)3) 574504V 16 45° (PR-2B)3) 574534V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

REMS pressing tongsREMS pressing rings

161

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.F.B.Q. BARONIO V 15 570115BQ press V 18 570125carbon steel V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

F.B.Q. BARONIO V 15 570115BQ press gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

Fercofl oor RFz 16* 571325DUO Press RFz 20* 571330FERCO PEX RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480

Fercofl oor RFz 16* 571325DUO Press RFz 20* 571330MULTIFER RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

FILINOX FTB 15 571432Filpress FTB 18 571434

FTB 22 571436FTB 28 571438M 42 (PR-3S)3) 572706M 54 (PR-3S)M 54 (PR-3S)3) 572708

FILINOX M 15 570110Instalpress M 18 570120Steel M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

FILINOX M 15 570110Instalpress M 18 570120Inox M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

Fittings Estándar RFz 16* 571325ECO-PRESS RFz 20* 571330

RFz 25 571335RFz 32 571340

Fittings Estándar RFz 16* 571325MULTICAPA RFz 18* 571327

RFz 20* 571330RFz 25 571335RFz 32 571340

Fittings Estándar RFz 16* 571325PE-X RFz 20* 571330

RFz 25 571335RFz 32 571340

FOHS TH 16* 570460HEIZTECHNIK TH 20* 570470FOHSPRESS TH 26* 570475

TH 32 570480FORNARA B 16* 570850ForPress B 20* 570860

B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

FRABO V 12 570107CHROMEPRESS V 15 570115

V 18 570125V 22 570135V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)V 22 45° (PR-2B)3) 574508

FRABO V 12 570107FRABOPRESS V 15 570115C-STEEL V 18 570125Securfrabo V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

FRABO V 12 570107FRABOPRESS V 15 570115316 SECURFRABO V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

FRABO V 15 570115FRABOPRESS V 18 570125316 GAS V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

FRABO H 16* 570320FRABOPRESS H 20* 570350MULTI-BRASS TH 16* 570460(MB) TH 20* 570470

TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

FRABO H 16* 570320FRABOPRESS H 20* 570350MULTI-PLUS H 26* 570370(MP) U 16* 570765

U 20* 570775C 26* 570750

FRABO V 22 570135FRABOPRESS V 28 570145NEXT V 22 45° (PR-2B)3) 574508

V 28 45° (PR-2B)3) 574510FRABO V 12 570107FRABOPRESS V 15 570115SECURFRABO V 18 570125FRABOPRESS H2O V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

FRABO V 12 570107FRABOPRESS V 15 570115SECURFRABO V 18 570125FRABOPRESS Gas V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

FRABO V 15 570115SOLARPRESS V 18 570125

V 22 570135V 28 570145V 35 570155V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

FRABO FRABO M 22 570130TS PRESS M 22 45° (PR-2B)3) 574526

V 22 570135V 22 45° (PR-2B)3) 574508

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

162

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Fränkische B 16* 570850alpex-duo B 18* 570855

B 20* 570860B 26 570870B 32 570880F 16* 570717F 18* 570720F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480

Fränkische F 16* 570717alpex F50 PROFI F 20* 570727

F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(DN 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925

Fränkische F 202) 570727alpex-gas2) F 262) 570730

F 322) 570735F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556

Fränkische Fz 40 570742alpex L Fz 50 570747

F 63 (S) 572385Fz 75 (PR-3B)3) 572830

Ggabotherm H+S TH 10* 570467

TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Gallagher USA H 12* (¼") 570300YogaPipe ACR U 14* (⅜") 570760

U 16* (½") 570765U 18* (⅝") 570770U 20* (¾") 570775U 25* (⅞") 570780U 32 (1⅛") 570785

Geberit Mapress M 12 570100C-STAHL M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 35 (PR-3S)3) 572727M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mapress M 12 570100EDELSTAHL M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 35 (PR-3S)3) 572727M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mapress M 15 570110EDELSTAHL Gas M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (P R-2B)3) 574530

Geberit Mapress M 12 570100KUPFER M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 35 (PR-3S)3) 572727M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mapress M 15 570110KUPFER Gas M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mepla G 16* 570400G 20* 570410G 26* 570420G 32 570430G 40 570440G 50 570450G 63 (S) 572470

Geberit Mepla G 16* 570400Therm G 20* 570410

G 26* 570420Geberit Volex TH 16* 570460

TH 20* 570470TH 26* 570475

General Fittings H 16* 5703205T00 H 20* 570350

H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

General Fittings B 16* 570850Serie 5S00 B 18* 570855

B 20* 570860B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390TH 16* 570460TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837

General Fittings B 16* 570850Trident B 20* 570860

B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

General Fittings TH 16* 570460Trident Gas TH 20* 570470

TH 26* 570475TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785

Giacomini H 16* 570320Raccordi RM H 20* 570350Giacomini H 26* 570370

H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S) 572365

Giacomini H 16* 570320RM MULTIGAS H 20* 570350

H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

REMS pressing tongsREMS pressing rings

163

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Giacomini V 15 570115Valvole Giacomini V 18 570125serie R850V V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

Golan Pipe U 16* 570765Systems U 20* 570775(Scandinavia) U 25* 570780Alu-Pres U 32 570785

U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)U 75 (PR-3B)3) 572828

Grinnell G-PRESS VUS ½" (OD 15,9 mm) 571770Copper Fittings VUS ¾" (OD 22,2 mm) 571775

VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795VUSFz 2½" (PR-3B)3) 572819(OD 66,7 mm)VUSFz 3" (PR-3B)3) 572820(OD 79,4 mm)VUSFz 4" (PR-3B)3) 572821(OD 104,8 mm)(OD 104,8 mm)

GS TH 14* 570455Wärmesysteme TH 16* 570460System TH TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

GS V 15 570115Wärmesysteme V 18 570125System V V 22 570135

V 28 570145V 35 570155V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

HHakaGerodur TH 10* 570467HakaGerodur- TH 11,6* 570482System TH 12* 570452

TH 14* 570455TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

HASTINIK M 15 570110Hastinik/Hitpress M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

heima-press TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

HELIROMA U 16* 570765Klimapress U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828

HELIROMA RFz 16* 571325romapress RFz 20* 571330

RFz 25 571335RFz 32 571340

Henco TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475HE 32 571900HEz 40 571904

Herotec H 16* 570320TEMPUS-PRESS H 20* 570350PLUS H 25* 570360

H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)U 75 (PR-3B)3) 572828

Herz PIPEFIX TH 10* 570467TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)THz 75 (PR-3B)3) 572829

HIDRONIX TH 16* 570460MULTIGAS TH 20* 570470

TH 26* 570475

HIDRONIX TH 14* 570455MULTIPIPE TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380U 14* 570760U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785

HIDRONIX TH 14* 570455UNICO TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380U 14* 570760U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785

HITEC TH 14* 570455Sistema Multistrato TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S)TH 50 (S) 572400

hp praski TH 10* 570467BAVARIA-press TH 14* 570455

TH 16* 570460TH 17* 570462TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

IIBP >B< Flex U 16* 570765

U 18* 570770U 20* 570775U 25* 570780U 32 570785

IBP >B< Press V 12 570107V 14 570112V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 14 45° (PR-2B)3) 574532V 15 45° (PR-2B)3) 574504V 16 45° (PR-2B)3) 574534V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

164

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.IBP >B< Press V 12 570107Carbon V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press V 15 570115Gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press V 15 570115Inox V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press V 15 570115Solar V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press XL XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103

ICMA H 16* 570320Sempiter H 20* 570350

H 26* 570370H 32 570380H 40 (4G) 570390TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

ICMA TH 16* 570460Sempigas TH 20* 570470

TH 26* 570475TH 32 570480

Idrosanitaria TH 16* 570460Bonomi TH 20* 570470Homegas TH 26* 570475Idrosanitaria TH 16* 570460Bonomi TH 18* 570465Idropress TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

IDROSISTEMI TH 16* 570460Ta-Press TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556Fz 40 570742Fz 50 570747F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (S) 572365B 16* 570850B 20* 570860B 26 570870B 32 570880

IDROTRADE H 16* 570320Storm Multipinza H 20* 570350

H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400U 16* 570765U 20* 570775U 40 570790U 50 570795

IDROTRADE H 14* 570310Storm Multistrato H 16* 570320

H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (PR-3B)U 63 (PR-3B)3) 572837

IDROTRADE M 15 570110StormPRES M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)M 54 (PR-3S)3) 572708

IDROTRADE M 12 570100StormSTEEL M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)M 54 (PR-3S)3) 572708

ILTA M 15 570110INOX/CHIBRO M 18 570120Pressfi tting Cuni M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

ILTA M 15 570110INOX/CHIBRO M 18 570120Pressfi tting inox M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

IPA IPANA Press TH 10* 570467TH 11,6* 570482TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 22* 570472TH 25* 570495TH 26* 570475TH 28 570477TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829

IPA THu TH 16* 570460IPANA Press TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485

IPALPEX TH 14* 570455(Industrie du TH 16* 570460Plastique et TH 18* 570465Accessoires) TH 20* 570470

TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

IPLEX K16/P18* 572600PIPELINES PF 22* 571980AUSTRALIAIplex Pro-fi tIPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K1 K32 572615(Gas) K1/40 572620

K1/50 572625IPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K2ISOLTUBEX RFz 16* 571325ISOLPEX RFz 20* 571330IPERT RFIz 25 571337

RFIz 32 571342ISOLTUBEX RFz 16* 571325Multicapa RFz 20* 571330

RFIz 25 571337RFIz 32 571342U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

ISOLTUBEX RFz 16* 571325Multicapa GAS RFz 20* 571330

RFIz 25 571337RFIz 32 571342

ISOTUBI M 15 570110NUMEPRESS M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

IVAR B 14* 570845Ivar-Press B 16* 570850

B 18* 570855B 20* 570860B 26 570870B 32 570880Fz 40 570742Fz 50 570747F 63 (S) 572385

IVAR TH 16* 570460MULTI PRESS TH 20* 570470GAS TH 26* 570475

TH 32 570480B 16* 570850B 20* 570860B 26 570870B 32 570880

REMS pressing tongsREMS pressing rings

165

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.IVAR TH 16* 570460MULTI PRESS TH 20* 570470GAS ITALIA TH 26* 570475

TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785

IVAR TH 16* 570460Multi Press MP TH 18* 570465

TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570717F 18* 570720F 20* 570727F 26* 570730F 32 570735Fz 40 570742Fz 50 570747F 63 (S) 572385F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (S) 572365B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

IVAR TH 16* 570460Multi Press Leak TH 20* 570470(MPL) TH 26* 570475

TH 32 570480F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

IVAR TH 16* 570460Plastic Multi Press TH 20* 570470Leak (PMPL) TH 26* 570475

TH 32 570480F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

IVAR TH 16* 570460Plastic Multi Press TH 20* 570470PMP TH 25* 570495

TH 26* 570475TH 32 570480F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 25* 570360H 26* 570370H 32 570380U 16* 570765U 20* 570775U 25* 570780C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

IVT PRIPRESS TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480

JJäger - Aquatec H 14* 570310Aquapress H H 16* 570320

H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (S)U 63 (S) 572365

Jäger - Aquatec M 15 570110C-Stahl - Press M 18 570120Typ M M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530

Jäger - Aquatec M 15 570110Edelstahl-Press M 18 570120Typ M M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Jäger - Aquatec V 15 570115Kupfer-Press V 18 570125Typ V V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Jansen TH 14* 570455JANSEN prima TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Jarafl ex- TH 14* 570455Presssystem TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

JUNGWOO VUS ½" (OD 15,9 mm) 571770JWPress VUS ¾" (OD 22,2 mm) 571775

VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795VUSFz 2½" (PR-3B)3) 572819(OD 66,7 mm)VUSFz 3" (PR-3B)3) 572820(OD 79,4 mm)VUSFz 4" (PR-3B)3) 572821(OD 104,8 mm)

KKAN U 16* 570765KAN-therm U 20* 570775

U 25* 570780C 26* 570750U 32 570785U 40 570790TH 50 (S) 572400TH 63 (S) 572405

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

166

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.KAN U 14* 570760KAN-therm LBP U 16* 570765

U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790TH 14* 570455TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

KAN M 15 570110KAN-therm M 181) 570120Inox M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102XP 108,0 XL (PR-3S)3) 7) 579109M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KAN M 15 570110KAN-therm M 181) 570120Steel M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102XP 108,0 XL (PR-3S)3) 7) 579109M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KE KELIT U 16* 570765KELIT KELOX U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 75 (PR-3B)3) 572828

KE KELIT M 15 570110COPPERFIX M 18 570120Kupfer M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KE KELIT M 15 570110steelFIX M 18 570120C-Stahl M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KE KELIT M 15 570110steelFIX M 18 570120Edelstahl M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KEMBLA VAU 15 (OD 12,7 mm) 572687KemPress VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

KEMBLA VAU 15 (OD 12,7 mm) 572687KemPress Gas VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

KISAN KI 16* 571360Kisan KD KI 20* 571370

KI 25* 571375TH 16* 570460TH 20* 570470TH 25* 570495

KISAN KI 16* 571360Kisan WL KI 20* 571370

KI 25* 571375KI 32 571380TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480

KISAN KI 16* 571360Kisan WM KI 20* 571370

KI 25* 571375KI 32 571380

KISAN U 20* 570775Kisan WR U 25* 570780

U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 75 (PR-3B)3) 572828

KISAN M 15 570110Kistal C M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KISAN M 15 570110Kistal Inox M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KME TH 14* 570455cuprotherm CTX TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475

KME TH 14* 570455Q-Tec - Comap TH 16* 570460SkinPress TH 20* 570470

TH 26* 570475KME H 16 A* 570620Q-Tec - Oventrop H 20 A* 570650Cofi t H 26 A* 570670

LLECHAR TH 16* 570460ALCOBRAPEX TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485

LECHAR U 16* 570765COBRAPEX U 20* 570775

U 25* 570780U 32 570785

LEGEND-PRESS VUS ½" (OD 15,9 mm) 571770press fi tting VUS ¾" (OD 22,2 mm) 571775system VUS 1" (OD 28,6 mm) 571780

VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795VUSFz 2½" (PR-3B)3) 572819(OD 66,7 mm)VUSFz 3" (PR-3B)3) 572820(OD 79,4 mm)VUSFz 4" (PR-3B)3) 572821(OD 104,8 mm)

LK Systems V 12 570107LK >B<Press V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

LK Systems V 12 570107LK >B<Press V 15 570115Elförzinkat V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

LK Systems V 15 570115LK >B<Press V 18 570125Gas V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

LK Systems TH 16* 570460LK Universal TH 20* 570470

TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

LVI-DAHL U 16* 570765Altech-Alupex U 20* 570775

U 25* 570780U 32 570785

MMAINCOR U 16* 570765MAINPRESS U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837

MAINCOR U 16* 570765MAINFLOR U 20* 570775Mair Heiztechnik M 12 570100Gomafi x Cu/E M 15 570110

M 181) 570120M 22 570130M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526

REMS pressing tongsREMS pressing rings

167

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Mair Heiztechnik H 11,5* 570315Gomafi x M H 14* 570310

H 16* 570320H 20* 570350

Mair Heiztechnik H 11,5* 570315M-Press H 14* 570310

H 16* 570320H 20* 570350H 26* 570370H 32 570380U 40 570790

Ma.s.ter System TH 14* 570455PRESSMASTER TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

METALGRUP U 16* 570765Permatubo U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

METALGRUP RFz 16* 571325PexGrup RFz 20* 571330

RFz 25 571335RFz 32 571340

METALGRUP U 16* 570765MultiGrup U 18* 570770

U 20* 570775U 25* 570780U 32 570785

Mueller Industries VUS ½" (OD 15,9 mm) 571770Streamline PRS VUS ¾" (OD 22,2 mm) 571775

VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795VUSFz 2½" (PR-3B)3) 6) 572819(OD 66,7 mm)VUSFz 3" (PR-3B)3) 6) 572820(OD 79,4 mm)VUSFz 4" (PR-3B)3) 6) 572821(OD 104,8 mm)

MULTITHERM TH 16* 570460PRESSSYSTEM TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829

Multicapas RFz 16* 571325Industrial RFz 20* 571330AIS PEX RFz 25 571335

RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785

Multicapas MT 20* 571744Industrial MT 25* 571746multitubo systems MT 32 571748MC U 16* 570765

U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

Multicapas H 16* 570320Industrial H 20* 570350multitubo systems H 25* 570360MM H 26* 570370

H 32 570380MT 20* 571744MT 25* 571746MT 32 571748RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

NNEUTHERM H 16* 570320MEKUPRESS-HT H 20* 570350

H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790

NIBCO (USA) VUS ½" (OD 15,9 mm) 571770Press System VUS ¾" (OD 22,2 mm) 571775Copper VUS 1" (OD 28,6 mm) 571780

VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795

Nicoll Fluxo TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829

NUPI Industrie B 16* 570850Italiane B 18* 570855Multinupi B 20* 570860

B 26 570870B 32 570880F 16* 570717F 18* 570720F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Nussbaum VMP ⅜" (OD 17,2 mm) 571740Optifi tt-Press VMP ½" (OD 21,3 mm) 571762

VMPz ¾" (OD 26,9 mm) 571764VMPz 1" (OD 33,7 mm) 571767VMPz 1¼" (S) 572413(OD 42,4 mm)VMPz 1½" (PR-3B)3) 572844(OD 48,3 mm)VMPz 2" (PR-3B)3) 572845(OD 60,3 mm)

Nussbaum VRX 16 571750Optifl ex-Flowpress VRX 20 571752

VRX 25 571754VRX 32 571756VRX 40 571758VRX 50 571760VRX 63 571797

Nussbaum VP 16* 570910Optifl ex Press VP 20* 570915

VP 25* 570920VP 32 570925

Nussbaum V 15 570115Optipress V 18 570125Aquaplus V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 572815VFz 76,1 (PR-3B)3) 572816VFz 88,9 (PR-3B)3) 572817VFz 108,0 (PR-3B)3) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

168

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Nussbaum V 15 570115Optipress-Gaz V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 572815VFz 76,1 (PR-3B)3) 572816VFz 88,9 (PR-3B)3) 572817VFz 108,0 (PR-3B)3) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Nussbaum V 15 570115Optipress-Therm V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 572815VFz 76,1 (PR-3B)3) 572816VFz 88,9 (PR-3B)3) 572817VFz 108,0 (PR-3B)3) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

OO.M.T. - Press TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

Oventrop H 16 A* 570620Cofi t P H 20 A* 570650

H 26 A* 570670H 32 A 570680H 40 A 570690U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Oventrop H 16 A* 570620Cofi t PD H 20 A* 570650

H 26 A* 570670Oventrop H 16 A* 570620Cofi t PDK H 20 A* 570650Oventrop H 16 A* 570620Cofi t PD-HT H 20 A* 570650

H 25 A* 570660H 32 A 570680

Oventrop H 16 A* 570620Cofi t PDK-HT H 20 A* 570650

PPBTub RFz 12* 571320SERTIPRESS RFz 16* 571325

RFz 20* 571330RFz 25 571335

PBTub M 15 570110SERTI-STEEL M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Pegler Yorkshire M 12 570100XPress Carbon M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 66,7 XL (PR-3S)3) 7) 579108M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Pegler Yorkshire M 12 570100XPress Copper M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102XP 108,0 XL (PR-3S)3) 7) 579109M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Pegler Yorkshire M 15 570110XPress Copper M 181) 570120Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 15 570110XPress M 181) 570120Stainless M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Pegler Yorkshire M 15 570110XPress Stainless M 181) 570120Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PERFEXIM U 16* 570765"PERFEKT U 20* 570775SYSTEM" U 25* 570780

U 32 570785PERFILTUBO U 16* 570765PERFILALUPEX U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

PERFILTUBO M 15 570110PERFILPRESS M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

PEXTUBE RFz 16* 571325PexTube RFz 20* 571330

RFIz 25 571337RFIz 32 571342

Pipelife M 15 570110C-PRESS M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Pipelife TH 16* 570460RADOPRESS TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Pipetec Connect TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470

TH 26* 570475TH 32 570480

PLASTICA ALFA TH 16* 570460Multypex Air TH 20* 570470

TH 26* 570475TH 32 570480

PLASTICA ALFA TH 16* 570460Multypexalfa Gas TH 20* 570470

TH 26* 570475PLASTICA ALFA TH 16* 570460Multypexalfa Gas TH 20* 570470protek TH 26* 570475PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470Plus TH 26* 570475

TH 32 570480PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470Thermo TH 26* 570475

TH 32 570480PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470Thermo Plus TH 26* 570475

TH 32 570480PLÁSTICOS U 16* 570765FERRO U 20* 570775FERROPLAST U 25* 570780GPF MC PRESS U 32 570785Pressfi ttingMULTICAPAPLÁSTICOS U 16* 570765FERRO U 20* 570775FERROPLAST U 25* 570780GPF PPSU U 32 570785Pressfi tting PE-Xy MULTICAPAPLÁSTICOS RFz 16* 571325FERRO RFz 20* 571330FERROPLAST RFz 25 571335GPF PRESS RFz 32 571340Pressfi tting PE-XPLUMBING PLUS K16/P18* 572600EZIPEX Crimp K/20* 572605(AUS) K/25* 572610

K32 572615K1/40 572620K1/50 572625

PLUMBING PLUS K16/P18* 572600EZIPEX Gas K/20* 572605(AUS) K/25* 572610

K32 572615K1/40 572620K1/50 572625

PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687EZIPRESS Gas VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697VAUFz 65 (PR-3B)3) 572839(OD 63,5 mm)VAUFz 80 (PR-3B)3) 572840(OD 76,2 mm)VAUFz 100 (PR-3B)3) 572841(OD 101,6 mm)VAU 15 45° (PR-2B)3) 574540(OD 12,7 mm)VAU 20 45° (PR-2B)3) 574542(OD 19,1 mm)VAU 25 45° (PR-2B)3) 574544(OD 25,4 mm)

PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687EZIPRESS Solar VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 15 45° (PR-2B)3) 574540(OD 12,7 mm)VAU 20 45° (PR-2B)3) 574542(OD 19,1 mm)VAU 25 45° (PR-2B)3) 574544(OD 25,4 mm)

REMS pressing tongsREMS pressing rings

169

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687EZIPRESS Water VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697VAUFz 65 (PR-3B)3) 572839(OD 63,5 mm)VAUFz 80 (PR-3B)3) 572840(OD 76,2 mm)VAUFz 100 (PR-3B)3) 572841(OD 101,6 mm)VAU 15 45° (PR-2B)3) 574540(OD 12,7 mm)VAU 20 45° (PR-2B)3) 574542(OD 19,1 mm)VAU 25 45° (PR-2B)3) 574544(OD 25,4 mm)

POLYPIPE TH 10* 570467POLYSURE TH 15* 570457

TH 22* 570472TH 28 570477

POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) M 35 570150POLYSAN- M 42 (PR-3S)3) 572706C-Stahl-Press- M 54 (PR-3S)3) 572708System M M 76,1 XL (PR-3S)3) 7) 579101

M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

POLYSAN V 15 570115Handelsges. V 18 570125m.b.H. & Co KG V 22 570135(Krems/Öster- V 28 570145reich) V 35 570155POLYSAN- V 42 570165C-Stahl-Press- V 54 570175System V V 15 45° (PR-2B)3) 574504

V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) M 35 570150POLYSAN- M 42 (PR-3S)3) 572706Edelstahl M 54 (PR-3S)3) 572708Press-System M 15 45° (PR-2B)3) 574522Gas M 18 45° (PR-2B)3) 574524

M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) M 35 570150POLYSAN- M 42 (PR-3S)3) 572706Edelstahl M 54 (PR-3S)3) 572708Press-System M 76,1 XL (PR-3S)3) 7) 579101Wasser M 88,9 XL (PR-3S)3) 7) 579102

M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

POLYSAN TH 14* 570455Handelsges. TH 16* 570460m.b.H. & Co KG TH 17* 570462(Krems/Öster- TH 18* 570465reich) TH 20* 570470POLYSAN- TH 26* 570475Press-System TH 32 570480

TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829

POLYSAN TH 14* 570455Handelsges. TH 16* 570460m.b.H. & Co KG TH 17* 570462(Krems/Öster- TH 18* 570465reich) TH 20* 570470POLYSAN-Henco- TH 26* 570475Press-System HE 32 571900

HEz 40 571904POLYSAN U 16* 570765(España) U 18* 570770Rainbow U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Prandelli H 14* 570310Multyrama Pf H 16* 570320

H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (PR-3B)3) 572837

Prandelli H 16* 570320Multyrama Pfm H 18* 570340

H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400U 16* 570765U 18* 570770U 20* 570775U 40 570790U 50 570795

RRaccorderie M 15 570110Metalliche M 18 570120aesPRES1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Raccorderie M 15 570110Metalliche M 18 570120inoxPRES1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Raccorderie M 15 570110Metalliche M 18 570120steelPRES1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

RBM Tita-gas TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480

RBM Tita-fi x B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870F 16* 570717F 18* 570720F 20* 570727F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 14* 570760U 16* 570765U 18* 570770U 20* 570775

Redi Nicoll Fluxo TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829

Redi Nicoll Fluxo TH 16* 570460Gas TH 20* 570470

TH 26* 570475RIFENG U U 14* 570760PRESS FITTING U 16* 570765(F5) U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

RIFENG TH TH 16* 570460PRESS FITTING TH 20* 570470(F9) TH 25* 570495

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

170

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.RIQUIER RFz 12* 571320A SERTIR RFz 16* 571325

RFz 20* 571330RFz 25 571335

Roth PressCheck RN 14* 572672RN 16 572670RN 17* 572674RN 20* 572676RN 25/26 572678RN 32 572680RN 40 (PR-3S)3) 572714RN 50 (PR-3S)3) 572716RNz 63 (PR-3B)3) 572836

Roth España - TH 16* 570460Global Plastic TH 18* 570465Rothapress TH 20* 570470

TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO INOX M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO INOX GAS M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO STEEL M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Rubinetterie TH 14* 570455Bresciane TH 16* 570460Bonomi TH 18* 570465TURBO PRESS TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Rubinetterie TH 16* 570460Bresciane TH 20* 570470Bonomi TH 26* 570475TURBO PRESS TH 32 570480GAS

SSa.MI plastic TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Sa.MI plastic TH 16* 570460Multistrato Gas TH 20* 570470

TH 26* 570475TH 32 570480

SANHA B 16* 5708503fi t-Press Pb-free B 20* 570860Serie 25000 B 26 570870

B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735Fz 40 570742Fz 50 570747F 63 (S) 572385F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

SANHA B 16* 5708503fi t-Press PPSU B 20* 570860Serie 35000 B 26 570870

B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775C 26* 570750U 32 570785

SANHA-NiroSan SA 15 570935Gas Presssystem SA 18 570940Serie 17000 SA 22 570945

SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA-NiroSan SA 15 570935Industry SA 18 570940Presssystem SA 22 570945Serie 18000 SA 28 570950

SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA-NiroSan- SA 15 570935Presssystem SA 18 570940Serie 9000 SA 22 570945

SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA-NiroSan SA 15 570935SF Presssystem SA 18 570940Serie 19000 SA 22 570945(silicone free) SA 28 570950

SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

REMS pressing tongsREMS pressing rings

171

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA SA 15 570935NiroTherm SA 18 570940Serie 91000 SA 22 570945

SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

SANHA SA 15 570935NiroTherm SA 18 570940Industry SA 22 570945Serie 98000 SA 28 570950

SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

SANHA-Press SA 12 570930Chrom SA 15 570935Serie 16000 SA 18 570940

SA 22 570945SA 28 570950M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)V 28 45° (PR-2B)3) 574510

SANHA-Press SA 12 570930GAS Pressfi ttings SA 14 570932Serie 10000/ SA 15 570935Serie 11000 SA 16 570937

SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502VG 14 45° (PR-2B)3) 574536V 15 45° (PR-2B)3) 574504VG 16 45° (PR-2B)3) 574538V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

SANHA-Press SA 12 570930Pressfi ttings SA 14 570932Serie 6000 SA 15 570935

SA 16 570937SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 66,7 XL (PR-3S)3) 7) 579107M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502VG 14 45° (PR-2B)3) 574536V 15 45° (PR-2B)3) 574504VG 16 45° (PR-2B)3) 574538V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

SANHA-Press SA 12 570930SOLAR SA 15 570935Pressfi ttings SA 18 570940Serie 12000/ SA 22 570945Serie 13000 SA 28 570950

SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 66,7 XL (PR-3S)3) 7) 579107M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

SANHA SA 12 570930PURAPRESS SA 14 570932Serie 8000 SA 15 570935

SA 16 570937SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 151) 570110M 181) 570120M 221) 570130M 281) 570140M 351) 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 66,7 XL (PR-3S)3) 7) 579107M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502VG 14 45° (PR-2B)3) 574536V 15 45° (PR-2B)3) 574504VG 16 45° (PR-2B)3) 574538V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

172

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA-Therm SA 12 570930Serie 24000 SA 15 570935

SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 66,7 XL (PR-3S)3) 7) 579108M 66,7 XL (PR-3S)3) 7) 579107M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA-Therm SA 12 570930Industry SA 15 570935Serie 28000 SA 18 570940

SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 66,7 XL (PR-3S)3) 7) 579108M 66,7 XL (PR-3S)3) 7) 579107M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANPRO TH 16* 570460THPRESS TH 20* 570470

TH 26* 570475TH 32 570480

SATEC SK VITerm TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 40 570790U 50 570795U 63 (S) 572365

Schütz TH 14* 570455duo-fl ex TH 16* 570460tri-o-fl ex TH 17* 570462

TH 20* 570470TH 25* 570495

Schwer Fittings M 12 570100AQUApress M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Seppelfricke V 12 570107VSH SudoPress V 15 570115C-Stahl V 18 570125Visu-Control V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Seppelfricke V 12 570107VSH SudoPress V 15 570115Edelstahl V 18 570125Visu-Control V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Seppelfricke V 12 570107VSH SudoPress V 15 570115Kupfer V 18 570125Visu-Control V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Seppelfricke V 12 570107VSH SudoPress V 15 570115Kupfer Gas V 18 570125Visu-Control V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Seppelfricke V 15 570115VSH SudoPress V 18 570125Kupfer Solar V 22 570135Visu-Control V 15 45° (PR-2B)3) 574504

V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508

Seppelfricke M 12 570100VSH XPress M 15 570110C-Stahl M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Seppelfricke M 15 570110VSH XPress M 181) 570120Edelstahl M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Seppelfricke M 15 570110VSH XPress M 181) 570120Edelstahl Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 12 570100VSH XPress M 15 570110Kupfer M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102XP 108,0 XL (PR-3S)3) 7) 579109M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Seppelfricke M 15 570110VSH XPress M 181) 570120Kupfer Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

SESTA TH 14* 570455SESTA GAS TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480

SESTA H 16* 570320Sistema H 20* 570350multistrato TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

SLOVARM U 16* 570765PEX-THERM U 20* 570775

H 26* 570370U 32 570785H 16* 570320H 20* 570350H 26* 570370H 32 570380

SOMATHERM H 16* 570320MULTI’X H 20* 570350

H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

SOMATHERM H 12* 570300SomaPRESS H 16* 570320

H 20* 570350H 25* 570360RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335U 16* 570765U 20* 570775U 25* 570780

REMS pressing tongsREMS pressing rings

173

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.STANDARD U 16* 570765HIDRAULICA U 18* 570770MultiStandard U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S)U 63 (S) 572365

STELBI H 16* 570320Polikraft H 20* 570350

H 26* 570370TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

STELBI TH 16* 570460Stelgas TH 20* 570470

TH 26* 570475STPC STPEX TH 16* 570460

TH 20* 570470TH 26* 570475

Systerm Ewoprex H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

Systerm H 16 A* 570620WELCO-Gas H 20 A* 570650

H 26 A* 570670H 32 A 570680

Systerm H 14 A* 570610WOPREX H 16 A* 570620

H 17 A* 570630H 20 A* 570650H 26 A* 570670H 32 A 570680H 40 A (4G)H 40 A (4G) 570695

TTDM BRASS H 16* 570320Serie 1600 H 18* 570340

H 20* 570350H 25* 570360H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785

TDM BRASS TH 16* 570460Serie 1700 gas TH 20* 570470

TH 26* 570475THL 32 570487

TermoConcept Basic E015) 571855TC-PRESS

THERMOLUTZ H 14* 570310H 16* 570320TH 20* 570470

TE-SA TH 14* 570455TE-SA press TH 16* 570460serie 800 TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

TIEMME TH 14* 570455AL-COBRAPEX TH 16* 570460Serie 1650 TH 18* 570465

TH 20* 570470TH 25* 570495TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)THz 75 (PR-3B)3) 572829

TIEMME RFz 12* 571320Serie 1700 PE-X RFz 16* 571325a pressare RFz 20* 571330

RFz 25 571335RFz 32 571340

TIEMME TH 16* 570460TIEMME Gas TH 20* 570470

TH 26* 570475THL 32 570487

TIGRE TH 16* 570460ALPEX GÁS TH 20* 570470

TH 26* 570475TH 32 570480

TKM TH 14* 570455Systemtechnik TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405

TRA U 16* 570765MULTITRAPRESS U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S)U 63 (S) 572365

TRA TRAPRESS H 12* 570300H 16* 570320H 20* 570350H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340

TWEETOP U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828

UUNICAL AG U 16* 570765MAX-MULTIPEX U 20* 570775

H 26* 570370C 26* 570750U 32 570785

UNIDELTA TH 16* 570460DeltAll TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S)U 63 (S) 572365

UNIDELTA TH 16* 570460DeltAll GAS TH 20* 570470

TH 26* 570475TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785

Uponor MLC UP 14* 572630UP 16* 572632UP 18* 572634UP 20* 572636UP 25 572638UP 32 572640U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828

Uponor MLC-D UP 16* 572632UP 20* 572636UP 25 572638UP 32 572640U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828

Uponor MLC-G2) UP 202) 572636UP 25 572638UP 32 572640

Uponor UP 16* 572632Uni Pipe PLUS UP 20* 572636

UP 25 572638UP 32 572640

VValsir Bravopress B 16* 570850

B 20* 570860B 26 570870B 32 570880F 16* 570717F 26* 570730F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554H 16* 570320H 20* 570350H 26* 570370H 32 570380H 32 V 570685TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775C 26* 570750U 32 570785

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

174

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Valsir PEXAL H 14* 570310

H 16* 570320H 20* 570350H 26* 570370H 32 570380H 32 V 570685TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Van Marcke Log. TH 16* 570460Tubipex TH 17* 570462

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405THz 75 (PR-3B)3) 572829

Van Marcke Log. M 12 570100Tubipress M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Variotherm TH 11,6* 570482System TH TH 16* 570460

TH 20* 570470Viega VX 12* 571630Fonterra VP 14/15* 570905

VP 16/17* 570910VP 20* 570915VP 25 570920

Viega VMP ⅜" (OD 17,2 mm) 571740MegaPress VMP ½" (OD 21,3 mm) 571762

VMPz ¾" (OD 26,9 mm) 571764VMPz 1" (OD 33,7 mm) 571767VMPz 1¼" (S) 572413(OD 42,4 mm)VMPz 1½" (PR-3B)3) 572844(OD 48,3 mm)VMPz 2" (PR-3B)3) 572845(OD 60,3 mm)

Viega Pexfi t VX 16* 571635VX 20* 571640VX 25* 571645

Viega Pexfi t G VX 16* 571635VX 20* 571640VX 25* 571645

Viega Prestabo V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 6) 572815VFz 76,1 (PR-3B)3) 6) 572816VFz 88,9 (PR-3B)3) 6) 572817VFz 108,0 (PR-3B)3) 6) 572818V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega Profi press V 12 570107VG 14 570132V 15 570115VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 6) 572815VFz 76,1 (PR-3B)3) 6) 572816VFz 88,9 (PR-3B)3) 6) 572817VFz 108,0 (PR-3B)3) 6) 572818V 12 45° (PR-2B)3) 574502VG 14 45° (PR-2B)3) 574536V 15 45° (PR-2B)3) 574504VG 16 45° (PR-2B)3) 574538V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 12 570107Profi press G V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 6) 572815V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 12 570107Profi press S V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 12 570107Profi press Therm V 15 570115

V 18 570125V 22 570135V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508

Viega ProPress VUS ½" (OD 15,9 mm) 571770System USA VUS ¾" (OD 22,2 mm) 571775

VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795

XL-C/XL-S VUSFz 2½" (PR-3B)3) 6) 572819(OD 66,7 mm)

XL-C/XL-S VUSFz 3" (PR-3B)3) 6) 572820(OD 79,4 mm)

XL-C/XL-S VUSFz 4" (PR-3B)3) 6) 572821(OD 104,8 mm)

Viega Propress VAU 15 (OD 12,7 mm) 572687WATER System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

Viega PropressG VAU 15 (OD 12,7 mm) 572687GAS System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

Viega Raxinox VRX 16 571750VRX 20 571752

Viega Raxofi x VRX 16 571750VRX 20 571752VRX 25 571754VRX 32 571756VRX 40 571758VRX 50 571760VRX 63 571797

Viega Sanfi x2) VP 16/17* 570910VP 20* 570915VP 25* 570920VP 32 570925

Viega Sanpress V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VR 76,1 (PR-3B)3) 6) 572822VR 88,9 (PR-3B)3) 6) 572823VR 108,0 (PR-3B)3) 6) 572824V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 15 570115Sanpress Inox V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 6) 572815VFz 76,1 (PR-3B)3) 6) 572816VFz 88,9 (PR-3B)3) 6) 572817VFz 108,0 (PR-3B)3) 6) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 15 570115Sanpress Inox G V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VFz 64,0 (PR-3B)3) 6) 572815VFz 76,1 (PR-3B)3) 6) 572816VFz 88,9 (PR-3B)3) 6) 572817VFz 108,0 (PR-3B)3) 6) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viessmann TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

VINSAR TH 16* 570460PEX-AL-PEX TH 20* 570470

TH 26* 570475TH 32 570480

Vogel & Noot TH 16* 570460EASYTEC TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

VSH MultiPress U 14* 570760U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790TH 14* 570455TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

REMS pressing tongsREMS pressing rings

175

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.VSH V 12 570107SudoPress Carbon V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

VSH V 12 570107SudoPress Copper V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

VSH V 12 570107SudoPress V 15 570115Copper Gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

VSH V 15 570115SudoPress V 18 570125Stainless V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

VSH M 12 570100XPress Carbon M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 66,7 XL (PR-3S)3) 7) 579108M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

VSH M 12 570100XPress Copper M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708XP 64,0 XL (PR-3S)3) 7) 579100XP 66,7 XL (PR-3S)3) 7) 579108M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102XP 108,0 XL (PR-3S)3) 7) 579109M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

VSH M 15 570110XPress Copper M 181) 570120GAS M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH M 15 570110XPress Stainless M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

VSH M 15 570110XPress Stainless M 181) 570120Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

WMeier Tobler U 16* 570765Metalplast - Stramax U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Watts MTR TH 16* 570460Art press TH 20* 570470

TH 26* 570475TH 32 570480

WATTS US ⅜"* 571450RADIANT US ½"* 571455Watts WaterPEX US ¾"* 571460

US 1"* 571465US 1 ¼" 571470US 1 ½" 571475

WATTS US ⅜"* 571450RADIANT US ½"* 571455Watts US ¾"* 571460RadiantPEX US 1"* 571465

US 1 ¼" 571470US 1 ½" 571475

WATTS U 16 (½") 570765RADIANT U 20 (⅝") 570775Watts U 25 (¾") 570780RadiantPEX-AL U 32 (1") 570785Wavin U 14* 570760Tigris K1/K5 U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Wavin U 14* 570760Tigris M1/M5 U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

WeeConPress M 12 570100Alu M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512SA 12 570930SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712

WeeConPress M 12 570100C-Stahl M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

REMS pressing tongsREMS pressing rings

Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 176.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)

and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),

carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 15.10.2018. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.

176

Accessories for REMS radial presses (except for REMS Mini-Press) and suitable radial presses of other makes

AccessoriesAccessories

Description Art.-No.Adapter tongs Z1 for driving REMS pressing rings 45° (PR-2B) 574500Adapter tongs Z2 for driving REMS pressing rings M 35 – 54 (PR-3S), RN 40 – 50 (PR-3S) 572795Adapter tongs Z4 for driving REMS pressing rings F 75 (PR-3B), TH 63 – 75 (PR-3B), U 63 – 75 (PR-3B), RN 63 (PR-3B) 572801Adapter tongs Z5 for driving REMS pressing rings VFz/VR 64 – 108 (PR-3B), VMPz 1½ – 2" (PR-3B), VUSFz 2½ – 4" (PR-3B), VAUFz 65 – 100 (PR-3B) 572802Adapter tongs Z6 XL for driving REMS pressing rings XL 64,0 – 108,0 (PR-3S) with REMS Power-Press XL 579120Steel case with insert for 6 pressing tongs (up to Ø 35 mm/1" and pressing tongs U 40, U 50, TH 40, F 40, F 50, G 40, VUS 1¼")/cropping tongs and compartment for pipe cutter up to 42 mm 570295Steel case with insert for 2 pressing tongs (M 42 (4G), M 54 (4G), V 42, V 54, H 40, H 40 A, VUS 1½", VUS 2") 570290Steel case with insert for adapter tongs with pressing rings M 42 (PR-3S) and M 54 (PR-3S) or with pressing rings SA 42 (PR-3S) and M 54 (PR-3S). 572810Steel case with inlay for adapter tongs and 4 pressing rings VFz 64,0 – 108,0/VR 76,1 – 108,0/VUSFz 2½ – 4" (PR-3B) 572809Steel case with insert for adapter tongs Mini Z1 and adapter tongs Z1 and 6 REMS pressing rings V 12 – 35 45° (PR-2B) or M 12 – 35 45° (PR-2B) 574516

REMS pressing tongsREMS pressing rings

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.WeeConPress M 12 570100Inox M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

WeeConPress M 12 570100Kupfer M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 76,1 XL (PR-3S)3) 7) 579101M 88,9 XL (PR-3S)3) 7) 579102M 108,0 XL (PR-3S)3) 7) 579103M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

WeeConFlex H 16* 570320MVR H 20* 570350

H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

WEM U 16* 570765

WIELAND TH 142) 570455cuprotherm TH 162) 570460CTX2) TH 182) 570465

TH 202) 570470TH 262) 570475

WKS-Press TH 14* 570455TH 16* 570460TH 17* 570462TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

WÜRTH TH 16* 570460Würth TH 20* 570470

TH 26* 570475HE 32 571900

XXtraConnect F 16* 570717

F 20* 570727F 26* 570730F 32 570735F 16 45° (PR-2B)3) 574550F 20 45° (PR-2B)3) 574552F 26 45° (PR-2B)3) 574554F 32 45° (PR-2B)3) 574556H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(DN 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925

ZZetaesse TH 14* 570455Multistrato TH 16* 570460EUROPEX TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775

Zetaesse TH 14* 570455Multistrato TH 16* 570460ISOPEX TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775

ZEWOTHERM TH 12* 570452Zewo Press Premium TH 16* 570460

TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

ZEWOTHERM TH 16* 570460Zewo Press PPSU TH 20* 570470

TH 26* 570475TH 32 570480

ZURN US ⅜"* 571450INDUSTRIES US ½"* 571455ZURN PEX US ¾"* 571460

US 1"* 571465US 1 ¼" 571470US 1 ½" 571475US 2 ” 571477


Recommended