Below are the additional report details we need to extract in TEMS Discovery.

All the data that needs to be extracted is per Segment. For example, UPNY West, UPNY Main, UPNY East, UPNY Cluster 2 Connector Routes.

1.) First Step, create a composite per Project Segment and per MS. Create a composite for all the MS in LTE and Non LTE Scope. Below is an example.

1.) Extract the GPS Data from MS1 LTE Scope. Below is a sample.

2.) Right Click on Route and click export to Mapinfo MIF/MID File. Save it in a specified folder.

1.) Click on MS1 LTE Scope. Click on LTE CellScan – All EARFCNs. Then click Sc RSRP (dBm). Then click Top#1.

2.) Right Click on Top # 1 and click export to Mapinfo MIF/MID File. Save it in a specified folder.

1.) Click on MS1 LTE Scope. Click on LTE CellScan – All EARFCNs. Then click Sc RSRQ (dBm). Then click Top#1.

2.) Right Click on Top # 1 and click export to Mapinfo MIF/MID File. Save it in a specified folder.

1.) Click on MS1 LTE Scope. Click on WCDMA PSC Scanning – All UARFCNs. Then click Sc Peak Ec(dBm). Then click Top#1.

2.) Right Click on Top # 1 and click export to Mapinfo MIF/MID File. Save it in a specified folder.

1.) Click on MS1 LTE Scope. Click on WCDMA PSC Scanning – All UARFCNs. Then click Sc Peak Ec/Io (dB). Then click Top#1.

2.) Right Click on Top # 1 and click export to Mapinfo MIF/MID File. Save it in a specified folder.

1.) Click on MS3 LTE Scope. Click on Data Performance – RLC Layer. Then click RLC Throughput (kbps). Then click DL.

2.) Right Click on DL and click export to Mapinfo MIF/MID File. Save it in a specified folder. Name the file “2G”.

1.) Click on MS3 LTE Scope. Click on LTE Throughputs from Data Collector. Then click PHY Layer Throughput PDSCH (kbps).

2.) Right Click on PHY Layer Throughput PDSCH (kbps) and click export to Mapinfo MIF/MID File. Save it in a specified folder. Name the file “LTE”.

1.) Click on MS3 LTE Scope. Click on WCDMA RLC Throughput. Then click Best RLC DL Throughput (kbps).

2.) Right Click on Best RLC DL Throughput (kbps) and click export to Mapinfo MIF/MID File. Save it in a specified folder. Name the file “3G”.

1.) Click MS3 Non LTE. Right click and choose Table View. Then click Non LTE ALL MS CALL DROP 2G AND 3G. Then click SELECT.

2.) You should be able to see the sample table below.

3.) After you see the table. Click export to excel and save the file.

4.) Right Click MS3 Non LTE, Click Generate Report and choose Call Failure Details. Save the file to the specified folder.

5.) Repeat the same steps (step 1 to 4) for MS4 Non LTE and MS5 Non LTE.