6
Choose the Vibrin® gel coat that offers the optimum cost-performance balance. Review the specific product data sheet for guidelines on material handling and processing. Technical assistance is also available through your AOC representative.
Bathware Gel Coats Gel Coat Type Product Attributes
High Value G325
• Pigmented high value bathware at low HAP contents (<30% whites,<33% colors)
• Fast cure enables film cure times of less then 15 minutes
• Excellent leveling leads to a potential decrease in material usage of 10-20%.
• Formulated to spray with conventional spray equipment
High Value Flex G335
• Pigmented high value flex bathware at low HAP contents (<30% whites,<33% colors)
• Increased resistance to cracking as compared to G325
• Formulated to spray with conventional spray equipment
High Performance G365
• Pigmented ISO NPG high performance bathware at low HAP contents (<30% whites,<33% colors)
• Excellent water resistance • Designed to meet ANSI Z124 blister test • Formulated to spray with conventional spray
equipment
Typical Applications That Benefit from Vibrin® Gel Coats • Bath tubs • Tub/showers • Shower stalls • Spas
Choose the Vibrin® gel coat that offers the optimum cost-performance balance. Review the specific product data sheet for guidelines on material handling and processing. Technical assistance is also available through your AOC representative.
Cast Polymer Gel Coats Gel Coat Type Product Attributes
Low HAP Marble Clear
G440
• ISO NPG marble clear gel coat with HAP contents under 44%
• Cures dry to touch in less than one hour • Excellent thermal cycle results, 1400+ cycles
typical • Replacement “drop-in” system for higher
styrene gel coats • Very low color with a high degree of clarity
Conventional Marble Clear G402
• ISO NPG marble clear gel coat with conventional HAP contents
• Very low color with a high degree of clarity • Excellent thermal cycle results, 1400+ cycles
typical
Pigmented G325
• Pigmented gel coat for solid color units • Low HAP content (<30% whites, <33% colors) • Excellent thermal cycle results, 2000+ cycles are
typical Typical Applications That Benefit from Vibrin® Gel Coats
• Sinks and vanities • Bath tubs • Tub/showers • Spas • Shower stalls • Fireplace surrounds
Marine Gel Coats
Choose the Vibrin® gel coat that offers the optimum cost-performance balance. Review the specific product data sheet for guidelines on material handling and processing. Technical assistance is also available through your AOC representative.
Marine Gel Coats
Gel Coat Type Product Attributes
Interior Air Dry
- Matte G141
• Pigmented air dry gel coat available in conventional HAP and low HAP (<30% whites,<33% colors) systems
• Matte finish • Stain resistant to most common engine fluids
Interior Air Dry - Gloss G920
• Pigmented air dry gel coat with low HAP contents (<25%)
• Glossy finish • Stain resistant to most common engine fluids • Easy to clean surface
Conventional ISO NPG G315
• Pigmented ISO NPG gel coat with conventional HAP contents
• Easy to repair and buff back • High gloss finish • Excellent weather resistance • Excellent blister resistance
Low HAP ISO NPG G370
• Pigmented ISO NPG gel coat with low HAP contents (<30% whites,<33% colors)
• Formulated to spray with conventional spray equipment
• Excellent weather resistance • Excellent blister resistance • Resistant to blushing and water-spotting • Excellent leveling when compared to
competitive products
AOC is a leading global supplier of resins,
gel coats, colorants, additives and synergistic
material systems for composites and cast
polymers. AOC knows technology, lives quality,
and delivers service better than any other
resin supplier. For more information, go to
AOC–RESINS.com.
Sales Contacts
North America Toll free: +1 866 319 8827 [email protected]
Latin America +01 863 815 5016 [email protected]
Middle East +44 1206 390415 [email protected]
Europe +44 1206 390415 [email protected]
AOC UK Ltd. +44 01206 390400 [email protected]
India +44 1206 390415 [email protected]
Asia/Australia +44 1206 390415 [email protected]
THE WORLD OF
AOC World Headquarters955 Highway 57 EastCollierville, TN 38017
+01 901 854 2800 +01 901 854 1183 (fax)[email protected]
AOC is a registered trademark of AOC, LLC. Printed in USA. Copyright © 2013, AOC.
Pub: AOCCAP2013
