2
RENATRON ® ll 100 RENATRONPA 100 Reprocessing Systems Change...and continuity Reprocessing Systems. Sterilants. Disinfectants. Concentrates. The Updated RENATRON Series Reprocessing Systems are the foundations for the most complete reprocessing solution for your clinic. Other components of this system include: See DFU for more detailed specifications Reprocessing Systems RENATRON ® Series Specifications Change…and continuity Feed Line Flow 0.46 gallons/minute (1.75 liters/minute) at average pressure of 20-55 psig Peak Flow 1.6 gallons/minute (6 liters/minute). This peak flow is for 15-35 seconds in duration. Quality Must meet ANSI/AAMI RD-62 and RD-47 Temperature 59ºF-75ºF (15ºC-24ºC) Static Pressure Should not be in excess of 55 psig (379 K Pa, 3.79 Bars) Drain Minimum flow requirement is 1.6 gallons/minute (6 liters/minute) per reprocessing station. Room Temperature 41ºF-104ºF (5ºC-40ºC) Room Humidity Maximum relative humidity of 80% at 87.8ºF (31ºC) Width Depth Height Weight (Approximately) (Approximately) (Approximately) (Approximately) RENATRON II , PA Series 14.5” (41 cm) 12.3” (31 cm) 16” (33 cm) 50 lbs (23 kg) Interface Module 12” (30.5 cm) 11” (28 cm) 3.5” (8.9 cm) 6 lbs (2.7 kg) Drip Tray (Single)* 15.25” (39 cm) 28” (71 cm) 3.5” (9 cm) 3 lbs (1.36 cm) Drip Tray (Dual)* 33.25” (85 cm) 28” (71 cm) 3.5” (9 cm) 6 lbs (2.73 cm) Computer 7.3” (18 cm) 17.3” (44 cm) 16.3” (41 cm) 27.2 lbs (12.34kg) Monitor-CTR 14.2” (36 cm) 15.6” (39 cm) 14.8” (38 cm) 28 lbs (12.5 kg) Monitor-LCD 13.4” (34 cm) 6” (15 cm) 13.4” (34 cm) 7 lbs (3.2 kg) Report Printer (Approximately) 17.7” (50 cm) 14.6” (37 cm) 5.7” (15 cm) 11.7 lbs (5.3 kg) Label Printer (Approximately) 7.9” (20 cm) 9.75” (24.8 cm) 6.8” (17.3 cm) 3.2 lbs (1.5 kg) Water Requirements for a Single RENATRON Reprocessing Station Size and Weight Environmental Limits RENATRON Interface Computer Monitor Report Label Station Module Printer Printer Voltage 100, 220, 230, 115/230 VAC, 100-120 100-120/ 100-240 100-240 240 VAC 50/60 Hz VAC, 100-240 VAC VAC VAC, 50/60 Hz Single Phase 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Single phase Consumption 460 VA 20 VA 230 Watt 30/100 Watt 30 Watt 39.1 Watt Max Max Max Max Max Max Electrical *Counter depth needs to account for gauge blocks. Measurements DO NOT take into account space needed for gauge blocks (between 3” to 6”). Contact your MEDIVATORS representative for additional information. • RENALIN ® 100 Cold Sterilant • RENALOG ® RM Software/Data Management • RENALIN ® Indicator and Residual Test Strips • ON DEMAND ® Autodilution System About MEDIVATORS MEDIVATORS has been providing WORKING SOLUTIONS to the hemodialysis community since 1972. MEDIVATORS dialyzer reprocessing systems, sterilants, disinfectants and dialysate concentrates have been used in thousands of clinics and tens of millions of treatments Today, MEDIVATORS continues to provide dialysis clinics with the highest quality products and services to ensure that clinics have the WORKING SOLUTIONS necessary for optimal patient care. RENATRON ll 100 RENATRON PA 100 Int’l Version (230V) Model RS Number 78399-446 RENATRON ll 100 RS-8335 78399-448 RENATRON PA 100 RS-8315 Model Availability For More Information Contact MEDIVATORS at www.medivators.com/renal RENATRON ® , RENALIN ® , RENALOG ® and ON DEMAND ® are registered trademarks of Medivators Inc. FORMULA 409 ® is a registered trademark of The Clorox Company © 2015 MEDIVATORS Inc. P/N 50098-427C
