+ All Categories
Home > Documents >  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of...

 · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of...

Date post: 19-May-2020
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
10
Transcript
Page 1:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 2:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 3:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 4:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 5:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 6:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 7:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 8:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 9:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and
Page 10:  · Requirements per 3.2.1.1, 3.2.1.2.3.2.1.3 pass 5063 lbs 4.2.1 Static Strength Testing of Anchorage Connectors a) Attach anchorage on approved substrate per 41.2 b) (Type A and

Recommended