Residential Cartridge pdf document Aqua Middle East FZC.pdf

7/27/2019 Residential Cartridge pdf document Aqua Middle East FZC.pdf

1/48

RESIDENTIAL CARTRIDGE

GB


2/48


3/483

From simple to complex filtration, all of

them require a profound analysis.

To understand WHY and WHAT will

mean having the most appropriate answer

to cost/quality effectiveness.

Bare in mind that filtration will always

have a cost that can be minor or major. All

depends on the end result one wishes to

obtain.

Therefore it is very important to carefully

analyse beforehand all the elements

involved that originate the need to filter.

This will no doubt help achieve the most

adequate and correct solution for each

case.

The concern of contaminated liquids are

various and have many aspects. From

everyday drinking water to industrial foodprocessing plants, health risk and economic

loss make filtration an extremely important

factor.

Choosing a specific filtering solution

rather than another means having well

evaluated in advance important factors.

These factors are:

Type of liquid to be processed

Particle size

Dirt loading capacity

Media permeability

Pressure drop

Chemical compatibility

Temperature resistance

Other factors:

Cost/Quality effectiveness

Maintenance

Over the years AQUA Srl has made research

development its main goal. Finding the bestsolution to the aspects of filtration can only

be achieved through heavy investments in

technology and research. We are today able

to satisfy all the market needs and

requirements.

Our new Cartridge Product Guide presents

a vast amount of filtering elements that

defer in material used and sizes. A wide

range of products, that along with our

Filter Product Guide, make us today a full

line manufacturer. All products are strictly

made in compliance to the Health &

Security regulations.

AQUA Srl exports its products in all the 5

continents, to those customers that work

in various applications and markets. A

must for those that emphasize filtration

a major role in their business activity.

Our leading role today is not only to

present a wide range but also to be able

to suggest and determine together with

our users the most appropriate solutionfor any application.


4/484

1135510202030505090

5-2020-50

FRNFRN-BIGFRNFRNFRN-BIGFRNFRNFRN-BIGFRNFRNFRN-BIGFRN

BIG-DGBIG-DG

MICRON

8008001100150015002000250025002600260026002700

18002700

93/4

140014002000270027003600450045004600460046004800

32004800

20

2000

30003800

50006200

65006500

6800

30

2600

40004800

64008000

80008000

8000

40

depth cartridges

PECULIAR CHARACTERISTICS:- High Depth Filtration

- Constant filtration on all surface

- High Yield

- High resistance to compression

- High Stability

- Lower pressure drop- No residual or particle loss

FILTER EFFICIENCY:The FR-N Cartridges are fully tested to

achieve at least 95% filtration efficiency.

This means that a 10 micron FR-N Cartridge

will filter 95% of particles having a

diameter of 10 micron or more. The

extraordinary filtration capability of the

FR-N cartridges is obtained thanks to its

wide filtering surface and compactness

which is distributed along all the surface

of the cartridge itself.

The cartridges need the be changed whena loss in pressure drop is detected or in

any case when the specific filtering

application requires it.

FR-N line

Our depth cartridges FR-N Series are

designed to obtain a high efficiency and

filtration of various liquids having impurity.

Using only 100% pure polypropylene theyare manufactured through state of the art

technology. They are generally used in

applications that require extremely high

quality filtration.

During the manufacturing process, the

polypropylene is mixed with compressed

hot air. Then it is stratified on a rigid

polypropylene core through a continues

and constant rotating movement. This

process infuses and intersects the

polypropylene fibres amongst themselves.

This creates the so called Depth Cartridge

guaranteeing a uniform filtration alongall the surface of the cartridge.

The Polypropylene fibres used are always

and only of first choice which processed

at high temperatures welds them together

eliminating any possibility of losing

particles or residuals.

The range vary from 1 to 90 micron and

standard lengths are 93/4 to 40. The

cartridges are made up as one whole piece

no matter what length.

FLOW RATE (lt/h)

SEDIMENTCARTRIDGES

AQUA CARTRIDGE

AQUA CARTRIDGE

COMPETITOR CARTRIDGE

COMPETITOR CARTRIDGE

APPLICATIONS:The FR-N cartridges can be used as end-

line filtration or as pre-filtration.

Applications:

Water treatment

Electronic/Nuclear

Biotechnology/Fine chemicalsFood/Beverage

Coatings/Resins

General Industrial

Pharmaceutical/Cosmetics

Bulk chemicals/Petrochemicals

Galvanic

CARTRIDGESFR-N QUALITYCOMPARISON TESTUnder exact same workingconditions, AQUA Cartridgeclearly shows its very highefficient filtering capacityagainst the evident break-down of the competitor.


5/485


6/48

1

3

5

10

20

30

50

90

1

3

5

10

20

30

50

90

1

3

5

10

20

30

50

90

1

3

5

10

20

30

50

90

1

3

5

10

20

30

50

90

13

5

10

20

30

50

90

5

5

5

5

5

5

5

5

93/4

93/4

93/4

93/4

93/4

93/4

93/4

93/4

10

10

10

10

10

10

10

10

20

20

20

20

20

20

20

20

30

30

30

30

30

30

30

30

40

40

40

40

40

40

40

40

140

140

140

140

140

140

140

140

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

30

30

30

30

30

30

30

30

15

15

15

15

15

15

15

15

15

15

15

15

15

15

15

15

10,90

10,90

10,90

10,90

10,90

10,90

12,00

12,00

10,5

10,5

12,00

12,00

12,00

12,00

14,00

14,00

12,00

12,00

12,00

12,00

12,00

12,00

14,00

14,00

12,70

12,70

12,70

12,70

12,70

12,70

14,00

14,00

7,50

7,50

7,50

7,50

7,50

7,50

9,00

7,50

11,00

11,00

11,00

11,00

11,00

11,00

14,50

11,00

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,061

0,061

0,061

0,061

0,061

0,061

0,061

0,061

0,076

0,076

0,076

0,076

0,076

0,076

0,076

0,076

6

FR

-N

FR

-N

A4240090

A4240100

A4240110

A4240120

A4240130

A4240140

A4240150

A4240160

A4240250

A4240260

A4240270

A4240280

A4240290

A4240300

A4240310

A4240320

A4240330

A4240340

A4240350

A4240360

A4240370

A4240380

A4240390

A4240400

A4240410

A4240420

A4240430

A4240440

A4240450

A4240460

A4240470

A4240480

A4240490

A4240500

A4240510

A4240520

A4240530

A4240540

A4240550

A4240560

A4240570

A4240580

A4240590

A4240600

A4240610

A4240620

A4240630

A4240640

MELT BLOWN CARTRIDGES series FR-N

Raw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:

Max working pressure:

Max diferential pressure:

Temperature:

Max working temperature:

FR-N

100% PP

100% PP

DOE

5-93/4-10-20-30-40

28 mm

63 mm

1/3/5/10/20/30/50/90

95%

6 bar

0,8 bar

80C

COD MICRON LENGTH QUANTITY box

VOLUMEpackage

Note: Max water flow rate at 20C and diferential pressure 0,15 bar

TECHNICAL FEATURES

Kgbox


7/48

1

5

20

1

520

5

5

5

93/4

93/493/4

225

225

225

110

110110

13,70

13,70

13,70

12,5

12,512,5

0,093

0,093

0,093

0,093

0,0930,093

1

5

20

1

5

20

MINI

MINI

MINI

MICRO

MICRO

MICRO

200

200

200

200

200

200

29,80

29,80

29,80

21,80

21,80

21,80

0,093

0,093

0,093

0,093

0,093

0,093

1

5

20

50

1

5

20

50

5-20

20-50

5-20

20-50

93/4

93/4

93/4

93/4

20

20

20

20

93/4

93/4

20

20

8

8

8

8

4

4

4

4

8

8

4

4

4,50

4,50

4,50

4,50

3,60

3,60

3,60

3,60

4,50

6,00

3,60

5,00

0,036

0,036

0,036

0,036

0,036

0,036

0,036

0,036

0,036

0,036

0,036

0,036

7

A424K010

A424K020

A424K030

A424K040

A424K050A424K060

A424M010

A424M020

A424M030

A424M040

A424M050

A424M060

A4270100

A4270120

A4270140

A4270150

A4270110

A4270200

A4270220

A4270230

A427012E

A427014E

A427020E

A427022E

FR

-N

FR

-NRaw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:


DOE

5

28 mm

50 mm

1/5/20

95%

6 bar

0,8 bar

80C


TECHNICAL FEATURES

MELT BLOWN CARTRIDGES series FR-N AQUA KID


VOLUMEpackage

Kgbox

MELT BLOWN CARTRIDGES series FR-N AQUA MINI and MICRO


VOLUMEpackage

Kgbox

MELT BLOWN CARTRIDGES series FR-N AQUA BIG


VOLUMEpackage

Kgbox

FR-N KID

DOE

100 mm

18 mm

25 mm

1/5/20

95%

6 bar

0,8 bar

80C

FR-N MINI

DOE

53 mm

18 mm

25 mm

1/5/20

95%

6 bar

0,8 bar

80C

FR-N MICRO

DOE

93/4-20

28 mm

114 mm

1/5/20/50

95%

6 bar

0,8 bar

80C

FR-N BIG

DOE

93/4-20

28 mm

120 mm

5-20/20-50

95%

6 bar

0,8 bar

80C

FR-N BIG (dual grad.)

100% PP


8/488

depth cartridgesFR-E line


9/489

FR

-E

FR

-E

5

10

20

50

5

10

20

50

5

10

20

50

5

10

20

50

93/4

93/4

93/4

93/4

20

20

20

20

30

30

30

30

40

40

40

40

60

60

60

60

30

30

30

30

15

15

15

15

15

15

15

15

9

9

9

9

9

9

9

9

6,75

6,75

6,75

6,75

9

9

9

9

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,075

0,061

0,061

0,061

0,061

0,076

0,076

0,076

0,076

A2460270

A2460280

A2460290

A2460310

A2460430

A2460440

A2460450

A2460470

A2460510

A2460520

A2460530

A2460550

A2460590

A2460600

A2460610

A2460630

CART.PP MELT-BLOW 93/4 FR5nE




CART.PP MELT-BLOW 20 FR5nE












COD DESCRIPTION LENGTH QUANTITY box

VOLUMEpackage

Kgbox

Raw Material

Length range:

Inner diameter:

Outer Diameter:

Micron Rating range:

Efficiency:

Max. working pressure:

Max. differential pressure:

Max. working temperature:

100% Polypropylene

93/4 20 30 40

28 mm.

61 mm.

5 / 20 / 50

80%

6 bar

0,8 bar

80C

TECHNICAL CHARACTERISTICS

MELT BLOWN CARTRIDGES series FR-E

MICRON

Our FR-E series, is a break through in technology granting an interesting option to our consolidated and outstanding FR-N series. Because of our met-blown fabrication

and procedure, these FR-E series grant a true comprise for those applications that require a just Price/Quality performance ratio.

During the manufacturing phase, and without the essence of the internal core, these cartridges grant a perfect and compact resistance of filtration.

Although an economical comprise, the soul element of these cartridge allow an exceptional performance when compared to the standard abundance supplied by

competitors:

Consistency

Faithful retention of contaminates

Well meaning to compression

Contained pressure loss

Thanks to the method of fabrication and experience gained with our exceptional FRN series, this series offer a mere absence of particle media loss.

Vast chemical compatibility because made only with 100% pure polypropylene, insuring nearly infinite applications

Laboratory tests show that this series are guaranteed to give at least 80% efficiency of stated particle size confirming its perfect price/quality ratio.


10/4810

11355510

10202020305050100100

FAFA-BIGFAFAFA-BIGFA-LFHFA

FA-BIGFAFA-BIGFA-LFHFAFAFA-BIGFAFA-BIG

MICRON

30030050080080010001100

110017001700200018001900190020002000

93/4

600600100016001600

2200

220025002500

26002600260028002800

20

900900150024002400

3300

330034003400

35003500350036003600

30

12001200200032003200

4000

400040004000

40004000400040004000

40

depth cartridges

The yarns appearance is uniform,

homogenous and very strong. This will

allow a very compact construction of the

cartridge itself and through a precise

pattern mounting, it will achieve

remarkable increase in the filtration surface.

Therefore as a consequence, an increasein cartridge life. All this to achieve a higher

filtration efficiency at an excellent

cost/quality ratio.

Wound Cartridge Open-end Wash

Oil residual 0,2%

This yarn is manufactured using machinery

that allows a shorter production period

and therefore a more economically priced

product. The raw material used for this

product is exactly the same as the Wash

Carded type. The only difference is that it

is not carded after the process of extrusion

& twist but simple manufactured around

a BCF (by extrusion spun yarn) making itcompact and uniform. Although less

compact than the carded one, it still yields

a satisfying filtration performance at lower

costs. Amongst the inconveniences of this

cartridge is that at the beginning of use

FA line

Our Polypropylene wound cartridges are

part of the depth and deforming cartridge

series.

They are manufactured using only 100%pure non-toxic polypropylene yarn. This

series offers an excellent ratio between

cost/quality, even though usually referred

to as economic-type they are

manufactured so as to guarantee a high

nominal filtration level.

In this series we have 2 main types of

Wound PP Cartridges

Wound Cartridge Carded Wash

Oil residual 0,07%

Because of its characteristics, this wash

carded yarn is of superior quality. It is

manufactured using only first choice raw

materials and during the process ofextrusion & twist it undergoes a wash

treatment at very high temperatures

eliminating oil residuals used beforehand

of the manufacturing process itself. To

increase its resistance, it is then carded

and no further oils are added thus

guaranteeing a completely non-toxic

natural polypropylene yarn.

FLOW RATE (lt/h)

SEDIMENTCARTRIDGES

Applications:

Water treatment, Electronic/Nuclear,

Biotechnology/Fine chemicals,

Food/Beverage, Coatings/Resins,

General Industrial,

Bulk chemicals/Petrochemicals,

Galvanic.

it creates a small amount of foam that

after a short period will disappear. Even if

the foam is non-toxic, in certain

applications it could cause minor problems

to the post-filtration unit. Therefore it is

important to know were such cartridge

will be applied to avoid any inconvenience.

The inside core of the filter is rigid and in

Polypropylene which guarantees stability.

The lengths range from 4 to 40 and the

micron range from 1 to 100.


11/4811


12/48

1

3

5

10

20

30

50

100

1

3

5

10

20

30

50

100

1

3

5

10

20

30

50

100

1

3

5

1020

30

50

100

4

4

4

4

4

4

4

4

5

5

5

5

5

5

5

5

7

7

7

7

7

7

7

7

93/4

93/4

93/4

93/493/4

93/4

93/4

93/4

180

180

180

180

180

180

180

180

144

144

144

144

144

144

144

144

108

108

108

108

108

108

108

108

72

72

72

7272

72

72

72

13,10

12,60

12,60

11,70

11,70

11,70

11,70

11,70

13,70

13,30

13,30

13,10

13,10

13,10

12,50

12,50

16,00

16,00

16,00

14,30

14,30

14,30

14,30

14,30

19,20

14,90

19,20

14,9013,60

13,60

13,60

13,60

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,0770,077

0,077

0,077

0,077

12

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

22

2

2

2

1

3

5

10

20

30

50

100

1

3

5

10

20

30

50

100

1

3

5

10

20

30

50

100

1

3

5

1020

30

50

100

10

10

10

10

10

10

10

10

20

20

20

20

20

20

20

20

30

30

30

30

30

30

30

30

40

40

40

4040

40

40

40

72

72

72

72

72

72

72

72

36

36

36

36

36

36

36

36

20

20

20

20

20

20

20

20

20

20

20

2020

20

20

20

19,60

19,60

15,30

15,30

13,50

13,50

13,50

13,50

16,30

16,30

14,40

14,40

13,20

13,20

13,20

12,30

13,30

13,30

12,00

12,00

10,60

10,60

10,60

10,20

19,10

19,10

17,80

17,8017,00

17,00

17,00

16,50

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,077

0,088

0,088

0,088

0,088

0,088

0,088

0,088

0,088

1,150

1,150

1,150

1,1501,150

1,150

1,150

1,150

2

2

2

2

2

2

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

11

1

1

1

FAFA

A4010010

A4010020

A4010030

A4010040

A4010050

A4010060

A4010070

A4010080

A4010090

A4010100

A4010110

A4010120

A4010130

A4010140

A4010150

A4010160

A4010170

A4010180

A4010190

A4010200

A4010210

A4010220

A4010230

A4010240

A4010250

A4010260

A4010270

A4010280A4010290

A4010300

A4010310

A4010320

A4010330

A4010340

A4010350

A4010360

A4010370

A4010380

A4010390

A4010400

A4010410

A4010420

A4010430

A4010440

A4010450

A4010460

A4010470

A4010480

A4010490

A4010500

A4010510

A4010520

A4010530

A4010540

A4010550

A4010560

A4010570

A4010580

A4010590

A4010600A4010610

A4010620

A4010630

A4010640

WOUND PP CARTRIDGES series FA

Raw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:


FA100% PP

100% PP

DOE

4-5-7-93/4-10-2030-40

28 mm

61 mm

1/3/5/10/20/30/50/100

80%

6 bar

0,8 bar

80C


VOLUMEpackage


TECHNICAL FEATURES

Kgbox

QUANTITYpackage


VOLUMEpackage

Kgbox

QUANTITYpackage


13/4813

520100

520100

777

93/493/493/4

108108108

727272

16,0014,3014,30

14,9013,6013,60

0,0770,0770,077

0,0770,0770,077

222

222

1510205010015102050100

93/493/493/493/493/493/4202020202020

181818181818999999

15,4014,6014,6014,6012,4012,4017,6016,7016,7016,7013,5013,50

0,0770,0770,0770,0770,0770,0770,0770,0770,0770,0770,0770,077

1510205015102050

5555593/493/493/493/493/4

200200200200200110110110110110

13,9012,7012,7012,9012,9013,9012,7012,7012,9012,90

0,0770,0770,0770,0770,0770,0770,0770,0770,0770,077

5

20

5

20

5

20

5

5

7

7

93/4

93/4

144

144

108

108

72

72

12,20

12,20

13,00

13,70

12,60

12,60

0,077

0,077

0,077

0,077

0,077

0,077

A4011450A4011440A4010680

A4010790A4010690A4011460

A4010780A4010650A4010770A4010660A4011400A4011200A4010900A4010700A4011410A4010710A4010890A4011140

A4011360A4011390A4011420A4010720A4011430A4011830A4011840A4011850A4011860A4011870

A4280980

A4280940

A4280990

A4280950

A4280750

A4280920

FAFARaw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:



TECHNICAL FEATURES

DOE

93/4-20

28 mm

114 mm

1/5/10/20/50/100

80%

6 bar

0,8 bar

80C

FA AQUA BIG

DOE

5

28 mm

50 mm

1/5/10/20/50

80%

6 bar

0,8 bar

80C

FA AQUA KID

DOE

5-7-93/4

28 mm

56 mm

5/20

70%

6 bar

0,8 bar

80C

FA-LFH (wound PP open end)

100% PP


VOLUMEpackage

Kgbox

QUANTITYpackage

WOUND PP CARTRIDGES series FA for 11/4-11/2 inlets/outlets


VOLUMEpackage

Kgbox

WOUND PP CARTRIDGES series FA AQUA BIG

COD MICRON LENGTH QUANTITY

box

VOLUME

package

Kg

box

WOUND PP CARTRIDGES series FA AQUA KID


box

VOLUME

package

Kg

box

WOUND PP CARTRIDGES series FA-LFH - 56 mm. (OPENEND YARN)


14/4814

3151520205050

PLCECE-BIGPLPL-BIGPLPL-BIG

MICRON

800180021002000230025002800

93/4

1600340041003600430045004800

20

surface filtering

This results in a longer life and major

efficiency.

The Polyester cartridges, contrary to

Cellulose types, can be reused over and

over again without loss of efficiency. It is

obvious though that the life of thesecartridges depend on the working

conditions. Even though the maintenance

is frequent, It is recommended not to use

such cartridges under extreme conditions.

Due to the fact that bacteria will

undoubtedly grow and nest within the

fibre, simply washing a cartridge does not

mean it will last forever.

Therefore as all washable cartridges, it is

recommended to frequently change them

in order to guarantee a safe filtration.

Thanks to its compatibility with a vast

numbers of chemicals, polyester can be

used also in specific applications where

other materials are not compatible withreagents and/or chemical solvents.

Regarding the applications of Polyester

and Cellulose cartridges, these are

particularly adequate for use in potable

water because the raw materials used are

compatible.

CE-PL line

Pleated cartridges represent a valid filtering

solution for diverse applications.

Certified raw materials are used and haveparticular technical characteristics that

give the cartridge reliability and resistance.

An important factor of quality is the

mechanical resistance. In both cases of

Polyester or Cellulose cartridges, the

resistance is given by using 100% pure

endless fibres.

After pleating, which takes into account

fixed parameters (pleats dimensions and

quantity) that guarantee maximum

efficiency, the element is mounted around

a polypropylene rigid core thus assuring

stability. It is then all placed inside apolypropylene cage which both ends are

closed by end caps.

The pleated cartridge allows a vast filtering

surface while the PP cage has symmetric

slots along all the surface of the cage itself

therefore allowing the water to flow

equally along all the sides of the cartridge

and avoiding the water penetrating just

one specific area.

FLOW RATE (lt/h)

CARTRIDGESPLEATED

APPLICATIONSCELLULOSE:

Water treatment


Galvanic

Paint Industry Ink Industry - Emulsion

POLYESTER:

Water treatment,

Electronic/Nuclear

Biotechnology/Fine chemicals

Food/Beverage

Coatings/Resins

General Industrial




15/4815


16/48

15

15

93/4

20

15

15

4,30

8,42

0,030

0,035

16

CEAQUAPRO

CEAQUAPRO

15

15

93/4

20

6

6

4,27

8,16

0,030

0,035

A4070080

A4070100

A4070090

A4070110

PLEATED CELLULOSE CARTRIDGES series CE AQUA PRO

Raw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:


CE AQUA PROCELLULOSE

PP

PP

DOE-PP

PVC

93/4-20

28 mm

70 mm

15

85%

6 bar

0,8 bar

65C


VOLUMEpackage


TECHNICAL FEATURES

Kgbox

PLEATED CELLULOSE CARTRIDGES series CE AQUA PRO BIG


VOLUMEpackage

Kgbox

CELLULOSE

PP

PP

DOE-PP

PVC

93/4-20

28 mm

116 mm

15

85%

6 bar

0,8 bar

65C

CE AQUA PRO BIG


17/4817

PLAQUAPRO

PLAQUAPRO

3

3

20

20

50

50

93/4

20

93/4

20

93/4

20

15

15

15

15

15

15

4,70

9,07

4,70

9,07

4,70

9,07

0,030

0,035

0,030

0,035

0,030

0,035

20

20

50

50

93/4

20

93/4

20

6

6

6

6

4,32

8,69

4,32

8,69

0,030

0,035

0,030

0,035

A4080230

A4080240

A4080140

A4080160

A4080150

A4080170

A4080180

A4080200

A4080190

A4080210

Raw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:



TECHNICAL FEATURES PL AQUA PRO PL AQUA PRO BIGPES

PP

PP

DOE-PP

PVC

93/4-20

28 mm

70 mm

3/20/50

95%

6 bar

0,8 bar

80C

PES

PP

PP

DOE-PP

PVC

93/4-20

28 mm

116 mm

20/50

95%

6 bar

0,8 bar

80C

PLEATED POLYESTER CARTRIDGES series PL AQUA PRO


VOLUMEpackage

Kgbox

PLEATED POLYESTER CARTRIDGES series PL AQUA PRO BIG


VOLUMEpackage

Kgbox


18/4818

808080250250430250

RLA 3/4 - 1RLA 11/4RLRLA 3/4-1RLA 11/4RLA 11/4RL

MICRON

3500420032004500520060004200

93/4

700084006400900010400120008400

20

surface filtration

The available lengths range from 5 to 20

and the microns range from a minimum

of 90 micron upwards. All in compliance

to EC regulations.

THE WASHABLE NET

CARTRIDGE IS IDEAL FOR:Suspended Solids, Sand, Slime, Rust.

APPLICATIONS:Water treatment,

General Industry,

Agricultural,

Water pumps and Domestic applications.

RL-RLA line

The washable Net Cartridges are called

surface cartridges and have a non-

deforming structure.

The inside core is manufactured using Talc

Filled Polypropylene and a nylon net is

welded.

The homogenous Net has physical and

mechanical characteristics. The square

mesh allows a uniform flow along all the

surface of the cartridge itself thus

minimizes the possibility of clogging.

Manufactured using monofilament fibres

that enable uniform openings It also allows

an accurate capacity of filtration while

avoiding pressure drop.

Also thanks to Its smooth surface it is veryeasy to wash and non shedding.

The washable net cartridges give a nominal

filtration with efficiency of 80%. When

properly utilized, they can be used over

and over again maintaining a constant

efficiency.

FLOW RATE (lt/h)

WASHABLE NETCARTRIDGES


19/4819


20/48

80

250

80

25080

250

80

250

5

5

7

793/4

93/4

20

20

144

144

90

9070

70

35

35

15,90

15,90

12,60

12,6012,60

12,60

13,00

13,00

0,093

0,093

0,093

0,0930,093

0,093

0,093

0,093

80

250

93/4

93/4

70

70

13,28

13,28

0,093

0,093

20

RLA-

RL

RLA-

RL

250430

80

250

430

80

250

430

80

250

430

55

7

7

7

93/4

93/4

93/4

20

20

20

144144

90

90

90

70

70

70

35

35

35

15,9015,90

12,30

12,30

12,30

12,60

12,60

12,60

13,00

13,00

13,00

0,0930,093

0,093

0,093

0,093

0,093

0,093

0,093

0,093

0,093

0,093

A4030100

A4030010

A4030020

A4030110A4030030

A4030120

A4030040

A4030130

A4030050A4030140

A4030060

A4030150

A4030160

A4030070

A4030170

A4030180

A4030080

A4030190

A4030200

A4040010

A4040050

WASHABLE NET CARTRIDGES series RLA for 3/4-1 inlets/outlets

Raw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

3/4 - 1

11/4 - 11/2

Outer diameter:

3/4 - 1

11/4 - 11/2

Micron rating:

Efficiency:

Pressure:



Temperature:Max working temperature:

RLAPA

-

PP

DOE-PP

PVC

5-7-93/4-20

27 mm

40 mm

65 mm

65 mm

80-250-430

80%

6 bar

0,8 bar

80C


VOLUMEpackage


TECHNICAL FEATURES

Kgbox

WASHABLE NET CARTRIDGES series RL

COD MICRON HEIGHT QUANTITY box

VOLUMEpackage

Kgbox

RLPA

PP

PP

DOE-PP

PVC

5-93/4

26 mm

-

63 mm

-

80-250

80%

6 bar

0,8 bar

80C

WASHABLE NET CARTRIDGES series RLA for 11/4-11/2 inlets/outlets


VOLUMEpackage

Kgbox


21/4821

R

LA

R

LA

80

80

250

5

93/4

93/4

225

225

110

15,78

15,78

15,78

0,093

0,093

0,093

80 102 mm 200 4,40 0,093

80

80

97

52

100

100

2,98

2,18

0,093

0,093

80 200 3,18 0,093

A4030090

A4030230

A4030240

A803R020

A803R030

A803R040

A6011320 59

80

250

20

250

6

6

6

6

3

3

4,5

4,5

0,035

0,035

0,035

0,035

A4030510

A4030520

A4030530

A4030540

93/4

93/4

20

20

Raw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

3/4 - 1

11/4 - 11/2

Outer diameter:

3/4 - 1

11/4 - 11/2

Micron rating:

Efficiency:

Pressure:





TECHNICAL FEATURES RLA KID RLA AQUA NET RLA MINI RLA MICRO DIFF. FILTROPA

-

PP

DOE-PP

PVC

5

27 mm

-

50 mm

-

80

80%

6 bar

0,8 bar

80C

PA

-

PP

SOE

-

102 mm

27 mm

-

42 mm

-

80

80%

6 bar

0,8 bar

80C

PA

-

PP

SOE

-

97 mm

18 mm

-

22 mm

-

80

80%

6 bar

0,8 bar

80C

PA

-

PP

SOE

-

52 mm

18 mm

-

22 mm

-

80

80%

6 bar

0,8 bar

80C

PA

-

PP

SOE

-

59 mm

20 mm

-

25 mm

-

80

80%

6 bar

0,8 bar

80C

WASHABLE NET CARTRIDGES series RLA AQUA KID


VOLUMEpackage

Kgbox

WASHABLE NET CARTRIDGES series RLA AQUA NET


VOLUMEpackage

Kgbox

WASHABLE NET CARTRIDGES series RLA AQUA-MINI and AQUA-MICRO


VOLUMEpackage

Kgbox

WASHABLE NET CARTRIDGES DIFFUSER 20 mm.


VOLUMEpackage

Kgbox


VOLUMEpackage

Kgbox

WASHABLE NET CARTRIDGES LAVABILE series AQUA BIG


22/4822

80808080

ACAC-HT 3/4-1AC-HT 11/4ACP

MICRON

2500250032002800

93/4

5000500064005600

20

surface filtration

The Stainless steel net has a special

structure called REPS that thanks to its

characteristics makes it very strong and

of high filtering efficiency. All end caps

are electrically welded and no resin or

glues are used.

Pleated stainless steel cartridges, series

ACP can withstand pressures of 6 bars

without deforming. In any case it is always

suggested not to exceed 3 bars.

All stainless steel cartridges are washable

and therefore can be used time and time

again. It can be done by backwashing them

or washed with special chemicals.

APPLICATIONS:Water Treatment,

Food and beverage, Oil, Alimentary, Syrups

General Industries, Paint, resins,Bulk chemicals/Petrochemicals, polymer,

fuel, lubricant,

Sewage water.

AC-ACP line

Stainless steel net cartridges are so-called

surface cartridges with non deforming

structure.

They are well indicated for difficult

applications such as filtering of corrosive

liquids or were high temperatures apply.

They are available in the following versions.

- Series AC; non-pleated stainless steel

with end caps in polypropylene

- Series AC-HT; non-pleated stainless steel

with end caps in stainless steel

- Series ACP; pleated stainless steel with

end caps in stainless steel

Because of its structure, stainless steel has

no particle migration therefore especially

suitable for those applications weredrinkable water is being processed.

Being pleated, the ACP series grant a much

higher surface of filtration in the amount

of 4 times a standard AC version which

are non-pleated. Therefore they are more

efficient when high flow is required and

were a high percentage of contaminated

particles are present in the liquid itself.

STAINLESSSTEEL

CARTRIDGES

FLOW RATE (lt/h)


23/4823


24/4824

80

80

93/4

20

15

15

3,95

6,84

0,030

0,035

80

80

93/4

20

15

15

3,95

6,84

0,030

0,035

80

80

5

93/4

30

15

4,92

3,90

0,030

0,030

A4050030

A4050040

A4050080

A4050090

A4050110

A4050130

AC/AC-HT/A

CP

AC/AC-HT/ACPRaw material:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

3/4 - 1

11/4 - 11/2

Outer diameter:

3/4 - 1

11/4 - 11/2

Micron rating:

Efficiency:

Pressure:




AC


TECHNICAL FEATURES

NON-PLEATED STAINLESS STEEL CARTRIDGES series AC-HTwith end caps in stainless steell for 3/4-1 inlets/outlets


VOLUMEpackage

Kgbox

NON-PLEATED STAINLESS STEEL CARTRIDGES series AC-HTwith end caps in stainless steell for 11/4-11/2 inlets/outlets


VOLUMEpackage

Kgbox

NON-PLEATED STAINLESS STEEL CARTRIDGES serie AC

with end caps in polypropylene


VOLUMEpackage

Kgbox

SS AISI 304

SS AISI 304

-

DOE-PP

PVC

5-93/4

27 mm

70 mm

80 mm

75%

6 bar

0,8 bar

80C

AC-HTSS AISI 304

SS AISI 304

-

DOE-INOX

PVC

93/4-20

26 mm

37 mm

62 mm

62 mm

80

75%

6 bar

0,8 bar

100C

ACPSS AISI 304

SS AISI 304

-

DOE-INOX

PVC

5-93/4-20

26 mm

55 mm

80

75%

6 bar

0,8 bar

100C


25/4825

90

30

72 mm

72 mm

1

1

0,087

0,087

-

-

90

30

137 mm

137 mm

1

1

0,160

0,160

-

-

90

30

72 mm

72 mm

1

1

0,147

0,147

-

-

90

30

137 mm

137 mm

1

1

0,250

0,250

-

-

90

30

72 mm

72 mm

1

1

0,147

0,147

-

-

100

150

200

165 mm x 90

165 mm x 90

165 mm x 90

1

1

1

0,298

0,298

0,298

-

-

-

100

150

200

225 mm x 90

225 mm x 90

225 mm x 90

1

1

1

0,400

0,400

0,400

-

-

-

R8010080

R8010070

R8010100

R8010090

R8010120

R8010110

R8010140

R8010130

R8010120

R8010110

A8010460

A8010560

A8010510

A8010450

A8010440

A8010500

90 100 mm 1 - -R8010220

series EKO CLEAN 3/4-1-11/4


VOLUMEpackage

Kgbox

series EKO CLEAN 11/2


VOLUMEpackage

Kgbox

series TOP CLEAN E AQUAMATIC 3/4-1-11/4


VOLUMEpackage

Kgbox

series TOP CLEAN 11/2

COD MICRON LENGTH QUANTITY box VOLUMEpackageKgbox

series AQUAMATIC 11/2


VOLUMEpackage

Kgbox

series BRAVOMAX 11/2-2


VOLUMEpackage

Kgbox

series BRAVOMAX 21/2-3


VOLUMEpackage

Kgbox

REPLACEMENT CARTRIDGES FOR SELF CLEANING FILTERS

MINIBRAVO


VOLUMEpackage

Kgbox


26/4826

carbon cartridges

- Pre-Filtration

Treatment of water beforehand, through

a pre-filtration action which permits a

first treatment of the water itself

allowing a longer life to the cartridge

- Absorption performance of the carbon

It is determined by the quality andquantity of carbon used. Also the contact

time has a very important impact on the

final result. In fact the longer the water

remains in contact with the carbon (flow

rate) the stronger the carbon adsorption

effect will be, thus purifying the water.

- Post-Filtration

Treatment of water after hand, through

a post-filtration action which permits a

further treatment of the water itself and

eliminating any suspended carbon

residuals

Having all three the above elements will

no doubt reduce the flow rate. This meansa better performance of the process

because it optimises the active carbon

action. Active carbon will in the end

saturate and the life time depends on how

the cartridge is being used. We highly

recommend following the instructions on

our data sheet relevant to each type of

carbon cartridge.

CA-GAC line

These Cartridges act by means of a

physicochemical property of the active

carbon (adsorption) and in some cases

associated with the filtration action ofvarious filtering materials.

AQUA uses various active granulated

carbon, suggesting the most

appropriate types according to the

conditions and diverse needs of filtering

required. Our active granulated carbon

extracted from vegetable coco fruit has

characteristics that are very suitable

for treating water in general.

These active carbon cartridges have the

following specifications:

Grain Hardness

= Insignificance presence of Carbon

Powder Residuals.Very high surface filtration area

(up to 1500m2/gr)

= High Adsorption

= Longer life

Very high Holding Capacity

= High Adsorption

Insignificant presence of ash

= Less impurity

The general characteristics in

understanding what makes a very efficient

carbon cartridge are the following:

CARBONCARTRIDGES

Thanks to the exceptional quality of

our Melt Blown Pre & Post filtration,

our GAC active carbon cartridges

guarantee a perfect and superior quality

cartridge. These pre & post filters not

only will withhold all suspended

particles and carbon fines but also willregulate the water flow thus assuring

a perfect removal of chlorine.

Laboratory tests confirm the excellent

quality of our GAC Cartridge.

APPLICATIONSWater treatment

Electronic/Nuclear

Biotechnology/Fine chemicals

Food/Beverage

General Industrial




27/4827


28/4828

80

80

80

5

7

93/4

30

15

15

7,65

5,21

6,62

0,030

0,030

0,030

--

-

-

57

93/4

20

10070

50

25

12,9611,70

11,07

11,13

0,0930,093

0,093

0,093

A4090010

A4090020

A4090030

A4110010A4110020

A4110030

A4110040

activatedcarb

on

ac

tivatedcarb

on

-

--

-

5

793/4

20

100

7050

25

12,96

11,7011,07

11,13

0,093

0,0930,093

0,093

A4110070

A4110110A4110060

A4110120

Filter media:

Coconut shell granular activated carbon:

Pre filter:

Post filter:

Core:

Out cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Pre filter micron

Post filter micron

Efficiency (pre and post filter):

Pressure:


Max diferential pressure:Temperature:


RLA-CAG.A.C.

PA

PES

-

PP

SOE-PP

PVC

5-7-93/4

27 mm

65 mm

80

20

75%

6 bar

0,8 bar

50C


TECHNICAL FEATURES CA-CABLUG.A.C.

PES

PES

-

PST/PP

SOE-PST

PVC

5-7-93/4-20

27 mm

72 mm

20

20

75%

6 bar

0,8 bar

50C

GACG.A.C.

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

72 mm

40

40

95%

6 bar

0,8 bar

50C

GAC-CCG.A.C. LAVATO

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

72 mm

5/40

5/40

95%

6 bar

0,8 bar

50C

GAC-CC-PG.A.C. ADIC WASHED

+ POLYPHOSPHATE

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

72 mm

40

40

95%

6 bar

0,8 bar

50C

GAC-BIGG.A.C.

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

120 mm

40

40

95%

6 bar

0,8 bar

50C

WASHABLE NET CARTRIDGES WITH ACTIVE CARBON series RLA-CA


VOLUMEpackage

Kgbox

BLU CANISTER series CV


VOLUMEpackage

Kgbox


VOLUMEpackage

Kgbox

TRANSPARENT CANISTER series CV


29/4829

activatedcarb

on

ac

tivatedcarb

on

20

20

20

20

5

7

93/4

20

30

15

15

15

7,40

5,71

8,21

16,00

0,030

0,030

0,030

0,035

A4120010

A4120020

A4120030

A4120040

20

20

20

20

5

7

93/4

20

30

15

15

15

7,40

5,71

8,21

16,00

0,030

0,030

0,030

0,035

A4120050

A4120060

A4120070

A4120080

40

40

93/4

20

15

15

8,75

18,37

0,030

0,035

A4120560

A4120570

Filter media:

Coconut shell granular activated carbon:

Pre filter:

Post filter:

Core:

Out cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Pre filter micron

Post filter micron


Pressure:


Max diferential pressure:Temperature:


GAC-BIG-CCG.A.C. ADIC WASHED

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

120 mm

5/40

5/40

95%

6 bar

0,8 bar

50C


TECHNICAL FEATURES FA-CAG.A.C.

PP

PES

-

PP

DOE-PP

PVC

5-7-93/4-10-20

30 mm

70 mm

20

-

80%

6 bar

0,8 bar

50C

CE-CACELLULOSE IMPREGNATED

CARBON

-

-

PP

-

DOE-PP

PVC

5-7-93/4-20

27 mm

70 mm

5

-

85%

6 bar

0,8 bar

50C

FRN-CAG.A.C. ADIC WASHED

PP

PP

PP

-

DOE

-

5-93/4-20

27 mm

63 mm

5/20

-

95%

6 bar

0,8 bar

50C

CTO-ECARBON

BRIQUETTE

PES

PES

-

-

DOE-PP

PVC

93/4-20

26 mm

72 mm

10

-

95%

6 bar

0,8 bar

50C

AQUASELECTG.A.C. ADIC WASHED

CELLULOSE

CELLULOSE

-

PST

DOE-PST

-

-

13 mm

47 mm

5

5

85%

6 bar

0,8 bar

50C


VOLUMEpackage

Kgbox

ACTIVE CARBON CARTRIDGES series CA-POST20POST FILTER 20 MICRON


box

VOLUME

package

Kg

box

ACTIVE CARBON CARTRIDGESseries CA-POST20 BLU / POST FILTER 20 MICRON


VOLUMEpackage

Kgbox

ACTIVE CARBON CARTRIDGES series GAC-40CCCOCO SHELL GRANULAR-ACTIVATED CARBON / PRE-POST 40 MICRON FILTER


30/4830

10

10

93/4

20

25

16

12

17,5

0,042

0,065

A4220050

A4220070

5

55

20

20

20

5

93/420

5

93/4

20

30

1515

30

15

15

4,20

3,917,68

4,20

3,90

7,70

0,030

0,0300,035

0,030

0,030

0,035

A4210530

A4210540A4210550

A4210510

A4210500

A4210520

20

2020

20

20

5

793/4

10

20

30

1515

15

15

7,50

5,146,34

6,60

14,20

0,030

0,0300,030

0,030

0,035

A4210020

A4210030A4210040

A4210050

A4210060

40

40

93/4

20

6

6

8,28

16,02

0,030

0,035

A4120620

A4120630

40 93/4 15 8,80 0,030A4120580


VOLUMEpackage

Kgbox


VOLUMEpackage

Kgbox


VOLUMEpackage

Kgbox

CARBON BLOCK CARTRIDGES series CTO-E

ACTIVE CARBON CARTRIDGES series GAC/P-40CC / ACID WASHED COCO SHELLGRANULAR-ACTIVATED CARBON+POLYPHOSPHATES / PRE-POST 40 MICRON FILTER


VOLUMEpackage

Kgbox

ACTIVE CARBON CARTRIDGES series GAC-40CC BIG / ACID WASHED COCO SHELLGRANULAR-ACTIVATED CARBON / PRE-POST 40 MICRON FILTER

ACTIVE CARBON CARTRIDGES series FA-CA / PRE-POST 20 MICRON FILTERCOCO SHELL GRANULAR-ACTIVATED CARBON

ACTIVE CARBON CARTRIDGES series FRN-CA / PRE-POST 40 MICRON FILTERCOCO SHELL / GRANULAR-ACTIVATED CARBON


box

VOLUME

package

Kg

box


31/4831

5 AQUA SELECT 24 3,96 0,085

RLA-CA

RLA-CA

RLA-CA

CA

CA

CA

CA

GAC-40

GAC-40

GAC-5 CC

GAC-5 CC

GAC-40 CC

GAC-40 CC

GAC/P-40 CC

GAC-40 BIG

GAC-40 BIG

GAC-5 CC BIG

GAC-5 CC BIG

5

7

93/4

5

7

93/4

20

93/4

20

93/4

20

93/4

20

93/4

93/4

20

93/4

20

1,2 lpm a 0,1 bar

1,9 lpm a 0,2 bar

2,4 lpm a 0,3 bar

1,8 lpm a 0,1 bar

2,4 lpm a 0,2 bar

3,6 lpm a 0,2 bar

8 lpm a 1 bar

3,6 lpm a 0,2 bar

8 lpm a 1 bar

3,8 lpm a 0,2 bar

8 lpm a 1 bar

3,8 lpm a 0,2 bar

8 lpm a 1 bar

7 lpm a 0,3 bar

8 lpm a 0,2 bar

14 lpm a 0,4 bar

8 lpm a 0,2 bar

14 lpm a 0,4 bar

6.200 a 1,2 lpm

9.000 a 1,9 lpm

12.400 a 2,4 lpm

9.600 a 1,8 lpm

14.400 a 2,4 lpm

19.200 a 3,6 lpm

38.400 a 8 lpm

19.200 a 3,6 lpm

38.400 a 8 lpm

28.400 a 3,8 lpm

58.000 a 8 lpm

28.400 a 3,8 lpm

58.000 a 8 lpm

18.900 a 7 lpm

48.000 a 8 lpm

110.000 a 14 lpm

180.000 a 8 lpm

360.000 a 14 lpm

GAC-40 CC BIG

GAC-40 CC BIG

FA-CA PP20

FA-CA PP20

FA-CA PP20

FA-CA PP20

FA-CA PP20

CE-CA

CE-CA

CE-CA

CE-CA

FRN-CA

FRN-CA

FRN-CA

CTO-E

AQUA SELECT

93/4

20

5

7

93/4

10

20

5

7

93/4

20

5

93/4

20

93/4

8 lpm a 0,2 bar

14 lpm a 0,4 bar

1,4 lpm a 0,1 bar

2,1 lpm a 0,2 bar

2,6 lpm a 0,3 bar

2,6 lpm a 0,3 bar

5,2 lpm a 1 bar

7 lpm a 0,3 bar

12 lpm a 0,3 bar

18 lpm a 0,4 bar

24 lpm a 1 bar

1 lpm a 0,1 bar

2 lpm a 0,3 bar

3,5 lpm a 1 bar

4 lpm a 0,2 bar

2 lpm a 0,5 bar

180.000 a 8 lpm

360.000 a 14 lpm

6.400 a 1,4 lpm

9.200 a 2,1 lpm

12.600 a 2,6 lpm

12.600 a 2,6 lpm

25.200 a 5,2 lpm

8.500 a 1,8 lpm

14.400 a 3 lpm

24.400 a 4 lpm

38.000 a 4 lpm

4.200 a 1 lpm

8.400 a 2 lpm

16.800 a 3,5 lpm

12.000 a 4 lpm

900 a 2 lpm

1010

93/4

20

12

6

18

18

0,053

0,053

A4220110

A4220120

A8090030

MODEL LENGTH RECOMMENDEDFLOW RATE

CHLORINE REDUCTION

FLOW RATEMODEL LENGTH RECOMMENDED

FLOW RATECHLORINE REDUCTION

FLOW RATE

ALL CHLORINE REDUCTION DATA IS FOR 2 ppm FREE CHLORINE TO < 0,5 ppm. SOME DATA IS EXTRAPOLATED.


VOLUMEpackage

Kgbox

ACTIVE CARBON CARTRIDGES for AQUA-SELECT (2 pieces)COCO SHELL GRANULAR / ACTIVATED CARBON


VOLUMEpackage

Kgbox

CARBON BLOCK CARTRIDGES series CTO-E for AQUA BIG


32/4832

RLA CPRLA CPRLA CPCPCPCPCP

5793/45793/420

4 lpm6 lpm8 lpm6 lpm9 lpm12 lpm18 lpm

special cartridges

Polyphosphate cartridges have a low

pressure drop.

Usually they are used in industrial

applications. Standard regulations require

that only minimal dosage is allowed when

applied to drinking water. Therefore, in

these cases, it is necessary to have anaccurate and controlled dosage

guaranteed by a dosing pump (AQUA-

Mini & AQUA-Dos, see our Dosing Systems

Product Guide)

It is important to fully understand the

use of such cartridges so as to determine

the correct application.

For applications and maintenance, please

refer to the data sheet indicated for each

model.

IDEAL APPLICATIONS ARE:Inlet of heaters, Inlet of washing machines.

RLA-CP line

AQUA Srl offers various polyphosphate

cartridges that defer in sizes and with

defined characteristics.

Polyphosphate salts are anti-scaling

chemical agents. Therefore ideal for use

with hard calcareous water, and where

eliminating of scale and corrosion is

required.

A polyphosphate cartridge consists of a

plastic canister filled with crystal salts of

different mesh. The canisters can vary in

size.

Once the polyphosphate salt has dissolved

a chemical reaction takes place

withholding the suspended particles. This

prevents scaling and depositing of theparticles along pipelines or inside

mechanical components, avoiding

inefficiency.

To be efficient, all polyphosphate cartridge

require a determined time of water

contact. However, thanks to its fast

dissolving effect this period is relatively

short.

MODEL HEIGHT RECOMMENDED FLOW RATE

FLOW RATE (lpm)

POLYPHOSPHATECARTRIDGES


33/4833


34/48

80

80

80

5

7

93/4

30

15

15

12,60

8,74

12,50

0,030

0,030

0,030

34

RLA-CP/CP

RLA-CP/

CP

-

-

--

5

7

93/420

100

70

5025

12,96

11,70

11,0711,13

0,093

0,093

0,0930,093

A4100010

A4100020

A4100030

A4110010

A4110020

A4110030A4110040

WASHABLE NET CARTRIDGES WITH POLYPHOSPHATESseries RLA-CP

Filter media:

Pre filter:

Post filter:

Core:

Out cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Pre filter micron

Post filter micron


Pressure:



Max Temperature:Max working temperature:

RLA-CPFOOD GRADE POLYPHOSPHATE

PA

PES

-

PP

SOE-PP

PVC

5-7-93/4

27 mm

65 mm

80

20

75%

6 bar

0,8 bar

38C


VOLUMEpackage

Note: Max water flow rate at 20C and differentiaal pressure 0,15 bar

TECHNICAL FEATURES

Kgbox

CPFOOD GRADE POLYPHOSPHATE

PES

PES

-

PST

SOE-PST

PVC

5-7-93/4-20

27 mm

72 mm

20

20

75%

6 bar

0,8 bar

38C

TRANSPARENT CANISTERseries CV


VOLUMEpackage

Kgbox


35/4835

-

-

-

-

5

7

93/4

20

100

70

50

25

12,96

11,70

11,07

11,13

0,093

0,093

0,093

0,093

20

20

20

20

5

7

93/4

20

30

15

15

15

14,03

11,06

16,13

31,21

0,030

0,030

0,030

0,035

20

20

2020

5

7

93/420

30

15

1515

14,03

11,06

16,1331,21

0,030

0,030

0,0300,035

A4110070

A4110110

A4110060

A4110120

A4130010

A4130020

A4130030

A4130040

A4130050

A4130060

A4130070A4130080

BLU CANISTERseries CV


VOLUMEpackage

Kgbox

A4110070

A4110110

A4110060

A4110120

CARTRIDGES WITH POLYPHOSPHATES

series CP / PRE-POST 20 MICRON FILTERCOD MICRON LENGTH QUANTITY

boxVOLUME

packageKgbox

A4130010

A4130020

A4130030

A4130040

CARTRIDGES WITH POLYPHOSPHATESseries CP-BLU / PRE-POST 20 MICRON FILTER


VOLUMEpackage

Kgbox

A4130050

A4130060

A4130070A4130080


36/4836

300,40,40,5

QUMXMCAAQUA SELECT

MICRON

12012060

93/4

special cartridgesQU-ST line

AQUA can supply the following models of

Special Cartridges

QUARTZ CARTRIDGES;

The QU series are filtering cartridges made

with siliceous sand (quartz). Very fine grains

are used which are bonded together by a

epoxy component very resistant to water.

The extremely compact mesh construction

guarantees a nominal filtration of 30

microns with a filtering efficiency of 82%.

This is a mechanical filter and it is used

for eliminating or reducing suspended solid

particles or when there is turbid water.

Quartz cartridges can be used several timesbut require a thorough clean from time to

time. This can be done by submersing the

cartridge into a 10% dilute solution of

hydrochloric acid for 4 to 10 hours and

then using compressed air on the surface

making sure the action is from external to

internal.

Because of its structure It is suggested not

to use these cartridges excessively as the

SPECIALCARTRIDGES

filtered particles will become more difficult

to remove and consequently pressure drop

will jeopardize the efficiency and growth

of bacteria will accrue.

STERILIZING CARTRIDGES:

Antibacterial Ceramic Cartridges are

mechanical cartridges and not biological.

During the filtration they sterilize because

a special fossil flour of diatom is used.

These cartridges are very porous with very

fine mesh that can filter very fine

suspended particles. This means also

bacteria will be filtered.

It has to be clarified that these cartridges

will act only as a barrier to bacteria down

to a size of 0.5 micron.

Changing of these cartridges depends on

the working conditions. In any case wesuggest not to use such cartridge for more

than 12 months.

APPLICATIONS:Water Treatment

FLOW RATE (lph)


37/4837


38/48

30

30

30

5

7

93/4

18

12

12

6,85

6,05

8,07

38

0,4 240 24 7,40 0,028

0,028

0,028

0,028

A4160010

A4160020

A4160030

A4180010

spec

ial

spec

ial

QUARTZ CARTRIDGES series QU

Raw material:

Filter media:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:


QUQUARTZ

-

-

DOE

PES

5-7-93/4

28 mm

55 mm

30

82%

6 bar

0,8 bar

38C


VOLUMEpackage


TECHNICAL FEATURES

Kgbox

STERILIZING CARTRIDGES D.O.E. series MX


VOLUMEpackage

Kgbox

SINTERED DIATOMACEOUS EARTH

-

-

DOE

-

240 mm

1/4 x 30 mm

52 mm

0,4

99,9%

6 bar

0,8 bar

38C

MX


39/4839

0,4 240 24 9,80 0,028

0,5 72 mm 50 6,50 0,028

A4190010

A8090040

spec

ial

spec

ial

Raw material::

Filter media:

Core:

Outer cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Efficiency:

Pressure:



Temperature:



TECHNICAL FEATURES MCA AQUA SELECTSINTERED DIATOMACEOUS EARTH

G.A.C.

-

-

DOE

-

240 mm

1/4 x 30 mm

52 mm

0,4

99,9%

6 bar

0,8 bar

38C

SINTERED DIATOMACEOUS EARTH

-

ABS

-

DOE

-

72 mm

13 mm

50 mm

0,5

99,9%

6 bar

0,8 bar

38C

STERILIZING CARTRIDGES D.O.E. series MCA


VOLUMEpackage

Kgbox

CERAMIC AND ACTIVE CARBON CARTRIDGES FOR AQUA SELECT


VOLUMEpackage

Kgbox


40/4840

RCRCRC-BIGRC-BIGR-DEMIR-DEMIR-DEMI BIGR-DEMI BIGFE-BIG

93/420

93/420

93/420

93/42020

2 lpm3 lpm

4,5 lpm8 lpm1 lpm

1,6 lpm2,5 lpm4,7 lpm24 lpm

eq/lKgr/ft3 as CaCo3

eq/lKgr/ft3 as CaCO3

Na+Form1,941,5

OH+Form1,021,9

H + Form1,839,3

special cartridgesresin line

Cartridges with ionic exchange resin are

used for eliminating ionic substance which

are present in water.

According to the type of filter media used,

they can by applied for treating water with

calcium and magnesium, reducing the

presence of iron and obtain de-mineralized

water.

All cartridges are assembled with a pre and

post filtration. This optimizes the efficiency

of the resin for water inbound and

improves the quality of the treated water

outbound.

Similar to the GAC cartridges, the Pre &

post filters are made of melt blown which

is of the same technology used for ourFR-N cartridges. This technology

guarantees a very efficient filtering action.

APPLICATIONS:Water Tretment

General Industries

Laboratory

RESINCARTRIDGES

MODEL

FLOW RATE (lpm)

cation exchange resin

ion exchange resin

length recommendedflow ratemin. total exchange

capacity,


41/4841


42/48

resin

resin

42

5

5

93/4

20

15

15

11,32

25,00

0,030

0,035

5

5

93/4

20

15

15

11,32

25,00

0,030

0,035

5

5

93/4

20

6

6

12,13

28,50

0,030

0,035

A4150070

A4150080

A4150010

A4150040

A4150050

A4150060

Filter media:

Pre filter:

Post filter:

Core:

Out cage:

End caps:

O-Ring / Gasket:

Length:

Inner diameter:

Outer diameter:

Micron rating:

Pre filter micron

Post filter micron


Pressure:





TECHNICAL FEATURES RC RC-BIG R-DEMI R-DEMI BIG FE-BIGCATION RESIN

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

72 mm

5

5

95%

6 bar

0,8 bar

38C

CATION RESIN

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

120 mm

5

5

95%

6 bar

0,8 bar

38C

MIX BED RESIN

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

72 mm

5

5

95%

6 bar

0,8 bar

38C

MIX BED RESIN

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

120 mm

5

5

95%

6 bar

0,8 bar

38C

SILICA CRYSTALS

PP

PP

-

PP

DOE-PP

PVC

93/4-20

26 mm

120 mm

40

40

95%

6 bar

0,8 bar

38C

IONIC EXCHANGE RESIN CARTRIDGEseries R-DEMI / PRE-POST 40 MICRON FILTER


VOLUMEpackage

Kgbox

CATION EXCHANGE RESIN CARTRIDGESseries RC / PRE-POST 40 MICRON FILTER


VOLUMEpackage

Kgbox

CATION EXCHANGE RESIN CARTRIDGESseries RC-BIG / PRE-POST 40 MICRON FILTER


box

VOLUME

package

Kg

box


43/4843

5

5

93/4

20

6

6

12,13

28,10

0,030

0,035

40 20 6 28,10 0,035

A4150090

A4150100

A4150110

5 ppm

4 ppm

3 ppm

2 ppm

1 ppm

0,5 ppm

60.000

83.000

105.000

158.000

310.000

620.000

60

83

105

158

310

620

120

166

210

316

620

1.240

Note (1): in order to use silica crystals, the following characteristics are required:

- minimum water hardness of 5Fr.- minimum 80 mg/l TDS (total dissolved solids)

- back wash flow rate between 17 and 24 m3/h

Note (2): high iron concentration inside the water may cause unpleasant taste and smell. In this case its addvisable

to use an active carbon cartridge, series GAC-BIG-CC.

iron levelin water

total ltwater used

1000 lt day4 people

500 lt day2 people

IONIC EXCHANGE RESIN CARTRIDGESseries R-DEMI-BIG / PRE-POST 40 MICRON FILTER


VOLUMEpackage

Kgbox

IRON REMOVAL CARTRIDGESseries FE / PRE-POST 40 MICRON FILTER


box

VOLUME

package

Kg

box

APPROXIMATE LIFE OF CARTRIDGE

60 days

83 days

105 days

158 days

310 days

620 days

120 days

166 days

210 days

316 days

620 days

1.240 days


44/4844

20

30

40

50

10

25

50

80

25

50

40

1

1

1

1

1

2

3

1

1

1

1

1

2

2

1

1

11

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

13

1

1

3

3

2

3

3

3

3

3

3

2

1

3

3

1

3

1

1

21

2

2

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

2

2

2

23

3

2

3

1

1

2

1

2

3

2

1

1

1

1

1

1

1

2

1

11

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

3

3

2

12

3

2

2

1

*

1

1

1

2

3

1

1

1

1

1

2

2

1

1

11

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

13

1

1

3

1

*

*

*

2

1

3

1

*

*

*

*

*

*

*

*

*1

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

**

*

*

*

1

*

A

1

1

2

3

1

1

1

1

1

2

2

1

1

11

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

13

1

1

3

2

*

A

2

3

2

2

3

*

*

*

*

*

*

*

*

*1

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

**

*

*

*

1

1

1

2

1

1

2

3

1

2

*

1

2

1

1

3

*1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

2

1

2

2

1

12

1

1

1

1

1

3

1

1

1

1

3

1

3

2

2

1

1

1

1

11

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

3

12

1

1

1

3

2

3

2

1

3

3

1

2

2

2

2

2

2

*

1

*1

*

1

3

3

2

2

3

2

2

2

1

3

2

2

3

1

2

1

1

1

2

1

*

13

2

1

3

TEMPERATURE

MINERAL ACID

HYDROCHLORIC ACID

CHROMIC ACID

HYDROFLUORIC ACID

PHOSPHORIC ACID

NITRIC ACID

SULPHURIC ACID

ACQUA REGIA

ORGANIC ACID

ACETIC ACID

BENZOIC ACID

BUTYRIC ACID

FORMIC ACID

LACTIC ACID

OLEIC ACID

OXALIC ACID

SALICYLIC ACID

SALTS

SODIUM ACETATE

SODIUM BENZOATESODIUM BISULPATE

SODIUM BROMIDE

SODIUM CHYANID

ALUMINIUM CHLORIDE

AMMONIUM CHLORIDE

BARIUM CHLORIDE

CALCIUM CHLORIDE

FERRIC CHLORIDE

MAGNESIUM CHLORIDE

SODIUM CHLORIDE

ZINC CHLORIDE

SODIUM NITRATE

ALUMINIUM SULPHATE

COPPER SULPHATE

SODIUM SULPHATE

SODIUM SULPHIDE

BASE

CALCIUM CARBONATE

POTASSIUM CARBONATE

SODIUM CARBONATE

AMMONIUM HYDROXIDE

CALCIUM HYDROXYDE

POTASSIUM HYDROXYDE

SODIUM HYDROXYDE

OXIDIZING AGENTS

PERACET ACID

POTASSIUM BICHROMATEBROMINE

SODIUM CHLORITE

POTASIUM CHLORITE

CHLORINE

%C

ONCENTRATION

POLYPROPYLENE

POLYAMIDE

POLYESTER

POLYPROPYLENETF

SAN

POLYPROPYLENEGF

ABS

VITON P

VC

AISI304


45/4845

5

10

30

20

100

90

100

100

40

3

1

2

1

1

1

1

1

2

2

1

1

1

1

2

3

2

3

2

32

1

2

3

2

3

3

2

3

2

2

2

3

2

1

1

2

1

2

3

1

1

1

1

1

1

1

3

1

3

3

3

3

3

2

1

1

1

1

1

1

1

1

1

3

1

11

1

1

1

1

1

1

2

1

2

1

2

3

3

1

1

1

2

1

1

3

1

1

1

1

1

1

2

1

1

1

1

2

1

1

1

1

1

1

1

1

1

2

1

1

1

11

2

1

1

1

1

1

1

1

2

1

1

2

3

1

1

1

2

1

1

1

1

1

1

1

1

1

3

1

2

1

1

1

1

1

2

2

1

1

1

1

2

3

2

3

2

32

1

2

3

2

3

3

2

3

2

2

2

3

2

1

1

2

1

2

3

1

1

1

1

1

1

1

*

1

*

*

*

*

*

*

*

*

3

3

2

3

3

3

*

*

*

33

*

3

3

3

3

3

3

3

*

*

3

3

3

*

1

3

3

1

*

1

2

1

2

1

1

1

3

1

2

1

1

1

1

1

2

2

1

1

1

1

2

3

2

3

2

32

1

2

3

2

3

2

2

3

2

2

2

3

2

1

1

2

1

2

3

1

1

1

1

1

1

1

*

2

*

*

*

*

*

*

*

*

3

3

2

3

3

*

*

*

*

33

*

3

3

3

3

3

3

3

*

*

3

3

3

*

2

*

*

1

*

2

2

1

1

1

1

1

2

1

1

1

1

1

2

3

3

3

3

2

1

2

1

1

3

2

1

33

1

1

1

3

2

2

1

1

*

2

3

2

1

3

1

1

2

1

2

1

1

1

1

1

1

1

*

1

2

1

1

3

1

3

3

3

3

2

2

2

3

3

3

3

3

33

*

1

*

3

3

3

3

3

*

3

3

3

2

2

1

3

3

1

3

1

1

1

1

1

1

1

3

2

*

2

2

3

3

1

1

2

1

1

1

1

2

3

*

1

1

22

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

3

1

1

1

FLUORINE

SODIUM HYPOCHLORITE

OZONO

POTASSIUM PERMANGANATE

HYDROGEN PEROXIDE

IODINE SOLUTION

CALCIUM HYPOCLORITE

ORGANIC SOLVENTS

AMYL ACETATE

BUTYL ACETATE

ETHYL ACETATE

ACETONE

AMYL ALCOHOL

ETHIL ALCOHOL

METHYL ALCOHOL

BENZENE

CARBON BISULFIDE

CYCLOHEXANONE

CHLOROFORM

ETHIL CHLORIDE

ETHER BENZENEETHYL ETHER

DIETHYLENE GLYCOL

ETHYLENE GLYCOL

PROPYLENE GLYCOL

METHYL ETHYL KETONE

CARBON TETRACHLORIDE

TOLUENE

TRICHLOROETHYLENE

XYLENE

MISCELLANEOUS

ACETALDEHIDE IN WATER

ANILINE

BENZALDEHYDE IN WATER

CRESOL

PHENOL

FORMALDEHYDE

GLYCERINE

NAPHTHA

NITROBENZENE

MINERAL OIL

TRICRESYL PHOSPHATE

BEER

INKS

OLIVE OIL

SEA WATER

WINE

WHISKEY

MILK

TEMPERATURE

%C

ONCENTRATION

POLYPROPYLENE

POLYAMIDE

POLYESTER

POLYPROPYLENETF

SAN

POLYPROPYLENEGF

ABS

VITON P

VC

AISI304


46/4846

CARTRIDGES SPARE PARTS

CODE FRN

GASKET FOR

CARTRIDGES 3/4-1

A6010210 GASKET 52x27x4

CARTRIDGES 11/4-11/2-2

A6010860 GASKET 52x40x4

A6012070 GASKET 50x31x3,5

MG020020 GASKET 53x28x8 S/AD

MC030070 GASKET 21 D. 70x20 mm

MC030260 GASKET 21 D. 52x20 mm

COUPLERS

A6010190 UNIVERSAL GOUPLERS FOR CARTRIDGE

S4110160 CARTRIDGE GOUPLER CV

A6050260 CARTRIDGE GOUPLER AQUA PRO

DIFFUSER TUBE

A6010100 DIFFUSER TUBE 5


A6010120 DIFFUSER TUBE 93/4


A6012080 DIFFUSER TUBE 93/4 BIG

A6012090 DIFFUSER TUBE 20 BIG

PG010060 O.RING TUBE STANDARD

MG010480 O.RING TUBE AQUA BIG

A6010140 DIFFUSER DISC STANDARD

A6011370 DIFFUSER DISC AQUA KID

A6012100 DIFFUSER DISC AQUA BIG

FILTER MEDIA

MC010010 COCO SHELL GRANULAR-ACTIVATED CARBON 12X30 ACID WASHED

MC020030 POWDER POLYPHOSPHATE SALTS

MC020010 FINE GRANULAR POLYPHOSPHATE SALTS

MC030120 SOFTENER CATION RESIN (KG. 20)

MC030160 MIX BED RESIN (KG. 20)

MC030400 IRON REMOVER (Silica crystals) (KG. 22,7)

FA CE PL RL RLA KID AC ACP CV CP CA GAC CTO FACA CECA R

25

25

25

25

25

28

KG

KG

KG

Date post:	14-Apr-2018
Category:	Documents
Upload:	adolfsmith69
View:	217 times
Download:	0 times

Residential Cartridge pdf document Aqua Middle East FZC.pdf

Documents