16
RESINTECH PLASTICS (M) SDN BHD We have taken active steps to register and protect our intellectual property rigths, including steps for the registration of our trade mark FIMAS
RESINTECH PLASTICS (M) SDN BHD
We have taken active steps to register and protect our intellectual property rigths, including steps for the registration of our trade mark FIMAS
Resintech is a leading manufacturer that provides the latest advanced technology and innovation in producing the very best Polyethylene Pipes, Fittings and Tanks today.
Resintech uses only the finest material grades and the best state of the art manufacturing technology, leading Resintech to provide its customers the best quality range of polyethylene products.
Established in 1977 by founder and Managing Director Dato Teh Kim Poo, Resintech has grew from its modest beginning with a small scale manufacturing plant which manufacture only fible glass tanks and presently, expanding and owning 5 modern manufacturing plants with world class production facilities throughout Malaysia. Resintech is also listed on the second board of Bursa Malaysia Securities Berhad, which is the Kuala Lumpur Stock Exchange.
Resintech provides a range of differentiated polyethylene products that facilitate the construction and infrastructure purposes which consist of water, gas, sewer and drainage system. In order to support the ever changing market, Resintech has the distinction of being a “One-Stop Center” for customers. With its presence strategic locations throughout Malaysia and wide range of polyethylene products, it is able to provide customers efficient service and delivery.
Better quality and cost efficient polyethylene products have always been sought out within the market, thus Resintech strive to diversify its line of businesses and seek new business opportunities to compliment its present line of polyethylene products. Resintech will constantly be market driven and continuously improving its success, efficiency and excellence.
company profile
Throughout the company’s continuous effort and drive to improve the range of its polyethylene products, Resintech is proud to present its latest innovation, the FIMAS brand of polyethylene pipe fittings which consist of Electro Fusion and Thermoweld fittings.
With years of research and development, FIMAS polyethylene pipe fittings have been develop to meet the increasing customers demand, quality, efficiency and cost saving in the market. Combining the latest in manufacturingtechnology and thorough testing, the FIMAS polyethylene pipe fittings offer an easier and safer installation for PE pipe system application.
The development of FIMAS polyethylene pipe fittings has proven Resintech relentless effort in its continuousimprovement and commitment only to provide clients with the very best of its products.
1
our products
2
FIMAS Electro Fusion Fittings features:
• Suitable for both gas and water polyethylene application• Thick center wall and wide fusion zones• State of the art CNC resistance wire laying machine• Compliance with ISO Standard, BS EN 1555-3:2002 & BS EN 12201-3:2003• Standard connection pin diameter : 4.0mm• Easy assembly
• Light weight and flexible• Safe, leak proof and easy jointing by fusion welding• Each fitting comes complete with a bar code for easy installation• Universal user friendly as can be used with any commercially available welding machine with a bar code scanner.
FIMAS Electro Fusion fittings are specifically develop and manufacture to achieve high reliability & performance, long lasting life cycle service, leak proof connection and easy operation.
FIMAS Electro Fusion fittings are made from PE 100 materials andmanufactured using injection molded technology. Each FIMAS Electro Fusion fitting is incorporated with copper wires which are heated up to the required temperature through an electric current. This can be done throughRESINTECH Electro Fusion Welding Machine. Each FIMAS Electro Fusion fitting comes with a complete bar code and can be read through bar code scanner available in the electro fusion welding machine.
FIMAS ELECTROFUSION FITTINGS1
CouplerMaterial
Pressure
Material
Pressure
Welding Voltage
:
:
:
:
PE80
1.25 Mpa (Water)0.8 Mpa (Gas)
PE100
1.6 Mpa (Water)1.0 Mpa (Gas)
: 40v
Pin Connection Diameter : 4.0mm
SIZE (d)
20
25
32
40
50
63
75
90
110
125
140
160
180
200
225
250
280
315
D
34
39
46
55
66
82
98
117
142
164
173
203
226
251
280
312
347
389
Z
35
35
38
43
48
55
61.5
61.5
70.5
82
76
88
95
100
108
115
124
130
L
72
72
80
90
100
115
127
135
145
168
175
180
194
205
220
235
251
265
D
Z
d
L* All unit measurement are base on (mm)
3
SIZE (d x d)
20 X 20 X 20
25 X 25 X 25
32 X 32 X 32
40 X 40 X40
50 X 50 X 50
63 X 63 X 63
75 X 75 X 75
90 X 90 X 90
110 X 110 X 110
125 X 125 X 125
160 X 160 X 160
180 X 180 X 180
200 X 200 X 200
D
34
39
46
55
66
82
98
117
142
164
203
223
250
Z1
45
40
45
50
56
64
71
80
83
88
99
105
112
L1
67
65.5
75
84.5
97
113
128
148.5
166
178
213.5
230
254
Z
36
39
40
45
50
58
63
70
72
82
90
95
103
L
94
99
110
127
147
175
200
225
248
264
330
365
400
SIZE (d x d1)
40 x 32 x 40
50 X 32 X 50
50 X 40 X 50
63 X 32 X 63
63 X 40 X 63
63 X 50 X 63
75 X 50 X 75
75 X 63 X 75
90 X 50 X 90
90 X 63 X 90
110 X 63 X 110
110 X 90 X 110
160 X 90 X 160
160 X 110 X 160
180 X 90 X 180
180 X 110 X 180
180 X 125 X 180
180 X 160 X 180
200 X 90 X 200
200 X 110 X 200
200 X 125 X 200
200 X 160 X 200
200 X 180 X 200
D
55
66
66
82
82
82
98
98
117
117
142
142
203
203
223
223
223
223
250
250
250
250
250
Z
36
50
50
58
58
58
63
63
70
70
72
72
90
90
95
95
95
95
103
103
103
103
103
Z1
45
45
50
45
50
56
56
64
56
64
64
80
80
83
79
82
87
98
79
82
87
98
105
L1
80
85
90
92
98
105
113
121
122
130.5
145
163
193.5
193.5
204
207
212
223
220
223
228
239
246
L
119
131
139
144
152
160
200
200
225
198
210
232
274
290
365
365
365
365
400
400
400
400
400
Tee 90, equal
Tee 90, Reducing
Material
Pressure
Material
Pressure
Welding Voltage
:
:
:
:
PE80
1.25 Mpa (Water)0.8 Mpa (Gas)
PE100
1.6 Mpa (Water)1.0 Mpa (Gas)
: 40v
Material
Pressure
Material
Pressure
Welding Voltage
:
:
:
:
PE80
1.25 Mpa (Water)0.8 Mpa (Gas)
PE100
1.6 Mpa (Water)1.0 Mpa (Gas)
: 40v
Pin Connection Diameter : 4.0mm
Pin Connection Diameter : 4.0mm
Z1
L1d
d D
LZ
d1
d
Z1
Z
D
L
L1
* All unit measurement are base on (mm)
* All unit measurement are base on (mm)
4
Reducer Coupler
Elbow 45 Elbow 90
Material : PE80
Material : PE100
Welding Voltage : 40v
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
Material : PE80
Material : PE100
Welding Voltage : 40v
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
Material : PE80
Material : PE100
Welding Voltage : 40v
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
125
160
180
200
SIZE (d)
32
40
50
63
75
90
110
D
46
55
66
82
98
117
142
164
203
223
250
Z
40
45
50
58
63
68
72
80
90
95
103
L
60.5
69.5
85
96.5
107.5
120
137.5
151.5
179
203
217
SIZE (d)
63
75
90
110
125
160
180
200
D
82
98
117
142
166
203
223
250
Z
58
63
68
72
78
90
95
103
L
73
86.5
89
100
115
128
142
152
Pin Connection Diameter : 4.0mm
Pin Connection Diameter : 4.0mm
Pin Connection Diameter : 4.0mm
SIZE (d1 x d2)
40 X 32
50 X 32
50 X 40
63 X 32
63 X 40
63 X 50
75 X 63
90 X 63
110 X 63
110 X 90
160 X 90
160 X 110
160 X 125
180 X 90
180 X 110
180 X 125
180 X 160
200 X 110
200 X 125
200 X 160
200 X 180
D1
55
66
66
82
82
82
98
117
142
142
203
203
203
226
226
226
226
251
251
251
251
D2
46
46
55
46
55
66
82
82
82
117
117
142
164
117
142
164
203
142
164
203
226
Z2
45
50
50
51.5
57
57
60
62
72
72
90
90
90
98
98
98
98
100
100
100
100
Z1
40
40
49
44
49
50
63
63
60
65
65
72
80
65
72
80
90
72
80
90
98
L
90
112
115
131
133.5
123.5
142
155
177
180
220
216
201
248
243
229
210
254
247
227
218
d
Z
D
L
dD
ZL
Z2Z1
L
d1D
1
D2d2
* All unit measurement are base on (mm)
* All unit measurement are base on (mm)
* All unit measurement are base on (mm)
5
Tapping Saddle
Z2
Z1
d2
d1
L2
L1
Material : PE80
Material : PE100
Welding Voltage : 40v
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
Pin Connection Diameter : 4.0mm
SIZE (d1 x d2)
40 X 20
40 X 25
40 X 32
63 X 20
63 X 25
63 X 32
63 X 40
63 X 50
63 X 63
90 X 20
90 X 25
90 X 32
90 X 40
90 X 50
90 X 63
110 X 20
110 X 25
110 X 32
110 X 40
110 X 50
110 X 63
125 X 20
125 X 25
125 X 32
125 X 40
125 X 50
125 X 63
140 X 20
140 X 25
140 X 32
140 X 40
140 X 50
140 X 63
160 X 20
160 X 25
160 X 32
160 X 40
160 X 50
160 X 63
Z1
68
68
70
68
68
69
72
80
80
70
68
68
74
80
81
68
68
70
74
79
81
68
68
70
73
79
81
68
68
70
73
79
81
68
68
70
74
79
81
Z2
110
110
112
114
114
115
119
140
140
123
121
121
127
139
140
126
126
128.5
132
143
145
128
128
130
133
148
150
134
134
136
139
154
156
134
134
136
140
155
157
L1
120
120
120
170
170
170
170
198
198
186
186
186
186
215
215
204
204
204
204
230
230
237
237
237
237
260
260
249
249
249
249
270
270
260
260
260
260
282
282
L2
37.5
37.5
37.5
52
52
52
52
61
61
71
71
71
71
79
79
83.5
83.5
83.5
83.5
93
93
98
98
98
98
103
103
110
110
110
110
113
113
120
120
120
120
125
125
* All unit measurement are base on (mm)
Resintech Thermoplast Welding Machine features:• Fusion Data input by scanning of Bar Code or keying in manually
• Support both English and Chinese Language
• Display status of fusion and any possibilities of fault clearly in visible text and sound
• Universal user friendly as can be used to fusion other brand of electro fusion fittings
• Standard pin adaptors of 4.0mm and 4.7mm
• Easily transfer of data from machine to personal laptops or desktop for printing reports and saving history data
• Light weight
• Compact design with stainless steel casting for durability
• Direct connection to printer in order to print fusion reports on site without transferring data to computer
Resintech Thermoplast Welding Machine is
specifically developed to compliment the FIMAS
Electro Fusion fittings range. This has again
illustrated Resintech relentless efforts in
diversifying its line of businesses to complement
its range of polyethylene products.
Resintech Thermoplast Welding Machine is an
excellent quality machine due to its user friendly,
latest technology development, easy handling
and light weight.
6
RESINTECH THERMOPLAST WELDING MACHINE
STEP 2
ELECTRO FUSION - INSTALLATIONS
Jointing using electro fusion is simple, quick and efficient. Successful joints can be consistently reproduced after very simple training.
Similar procedures are used for all electro fusion systems, energy being provided by an electronic control unit.
The instructions below describe the use of electro fusion for jointing adjacent lengths of pipe. The instructions apply equally to joining thermoweld fittings to pipe.
Ideally, surfaces should be dry when joining. This is impractical in some situations, e.g. mains repair on insertions. Satisfactory joints can still be achieved in wet conditions providing the water is clean and free from suspended matter or oil. However, coupler joints must not be made in conditons of running water.
STEP 1
STEP 3
STEP 4
STEP 5
After preparing the surfaces of both pipes care should be taken to prevent the surfaces from becoming contaminated by grease or other dirt. This can be conveniently achieved by placing a plastic bag over each pipe end.Remove the electro fusion fitting from the protective wrapping and fit it on to one of the pipes to which it is to be joined until contact is made with the pipe centre stop. Mark the pipe to show the extremity of the fitting. Then insert the other pipe into the fitting until it reaches the pipe stop and mark that in a similar manner.
8.
9.
When using a hand scraper, the operation is simplified by rotating the pipe and scrapping from above. Where rotation is not possible scrapping should start from the under side.In the case of mechanical surface preparation tools the instruction supplied by the manufacturers should be followed.
6.
7.
CLAMPING
Care should be taken to prevent movement of the assembly during the fusion process. The use of welding clamps will minimize the risk of accidental movement and also assist in aligning pipes.Remove the terminal protectors and connect the control unit leads to the terminals on the fitting.
10.
11.
Observe the joining time shown on the fitting.Switch on the control unit. Key in the number of seconds required for jointing. check the digital display for confirmation that the correct time has been keyed in. Press the start button. The digital display will progressively reduce as the jointing time elapses.
12.
COUPLERS
Cut pipe square and remove burrs.Arrange pipes to be joined so that they are approximately in line and with the ends touching.Without removing the protective wrap, place the coupler along side with the pipe ends with the centre line of the fitting with the ends as shown.Using a felt tip pen or similar, place a mark on each pipe approximately 20mm out side the extremity of each end of the coupler.
1.2.
3.
4.
5. Place the fitting to one side and thoroughly scrape the outer surfaces of each pipe or thermoweld fitting from the mark to the pipe end, to completely remove the surface layer.
13.
Completion of the cycle will be indicated on the control panel. Material should also have risen up the fusion indicator hole adjacent to the terminal shroud, also indicating successful fusion.Remove the connection leads and leave the joint undistributed for the cooling period indicated on the fitting.
14.
15.
7
Elbow 90
SIZE (d)
63
75
90
110
125
160
200
225
250
315
400
Z
65
72
80
85
92
98
112
120
129
120
85
L
115
119
135
150
168
193
227
265
265
300
318
e
5.8
6.8
8.2
10
11.4
14.6
18.2
13.3
22.7
28.6
23.6
SDR11
√
√
√
√
√
√
√
X
√
√
X
SDR17
X
X
X
X
X
X
√
√
√
√
√
8
The development and manufacturing of FIMAS Thermoweld fittings demon-strated again Resintech relentless effort in pursuing and improving its range of polyethylene products.
Previous thermoweld fittings are mainly a result of fabrication of polyethylene pipes into fittings which are not leak proof and depend mainly on quality of fabrication by welders. With the development of FIMAS Thermoweld fittings, these short coming are non existent as all FIMAS Thermoweld fittings are manufacture using the latest injection molded technology which contribute to its high reliability & performance, longer lasting life cycle service, leak proof connections and easy operation.
FIMAS Thermoweld fittings are another extension from the FIMAS Electro Fusion fittings as both are able tocompliment one another during complex installation situations. FIMAS Thermoweld Fittings are manufactured using PE80 or PE100 materials and sizes are available from 20mm up to 800mm diameter.
FIMAS THERMOWELD FITTINGS2
FIMAS Thermoweld Fittings features:
• Suitable for both gas and water polyethylene applications• Available in SRD11, 13.5, 17, 21 and 26, PE80 or PE100• Elbow, Equal Tee, Reducer, Reducing Tee, Stub End & End Cap in sizes of 20mm up to 800mm are all available• State of the art injection molded technology, no fabrication needed as all fittings are produce in one piece• Uncommon fittings such as Reducing Elbow, Reducing Tee and Reducer can be assembled upon special request• Meticulous turning of clamped part ensure fitting’s roundness and precise dimension• Thicker Wall thickness in none cocket zone ensure fitting reliability and performance • Compliance with ISO Standard & BS EN 12201-3:2003• Light weight and flexible• Safe, leak proof and easy jointing by using electro fusion fitting or butt fusion
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
* All thickness are based on SDR11. For other thickness, please refer to page 13.
dL
e
Z
* All unit measurement are base on (mm)
9
End Cap
Elbow 45
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
SIZE (d)
63
75
90
110
125
140
160
180
200
225
250
280
315
355
400
450
500
560
630
L
67
71
80
91
96
103
110
113
117
124
140
148
162
80
85
85
90
90
95
e
5.8
6.8
8.2
10
11.4
12.7
14.6
16.4
18.2
20.5
22.7
25.5
28.6
21.1
23.7
26.7
29.7
33.2
37.4
SDR11
√
√
√
√
√
√
√
√
√
√
√
√
√
X
X
X
X
X
X
SDR17
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
SIZE (d)
63
75
90
110
125
160
200
225
250
Z
65
72
80
85
88
98
112
120
130
L
115
119
135
150
129
143
161.5
188
190
e
5.8
6.8
8.2
10
11.4
14.6
18.2
13.3
22.7
SDR11
√
√
√
√
√
√
√
X
√
SDR17
X
X
X
X
X
X
√
√
√
ed
ZL
L
ed
* All thickness are based on SDR11. For other thickness, please refer to page 13.
* All thickness are based on SDR11. For other thickness, please refer to page 13.* All unit measurement are base on (mm)
* All unit measurement are base on (mm)
10
ReducerSIZE (d1 x d2)
75 X 32
75 X 40
75 X 50
75 X 63
90 X 40
90 X 50
90 X 63
90 X 75
110 X 50
110 X 63
110 X75
110 X 90
125 X 63
125 X 75
125 X 90
125 X 110
160 X 90
160 X 110
160 X 125
200 X 110
200 X 125
200 X 160
225 X 160
225 X 200
250 X 160
250 X 200
250 X 225
315 X 200
315 X 225
315 X 250
315 X 280
355 X 225
355 X 250
355 X 280
355 X 315
400 X 225
400 X 250
400 X 280
400 X 315
400 X 355
450 X 280
450 X 315
450 X 355
450 X 400
500 X 315
500 X 355
500 X 400
500 X 450
560 X 355
560 X 400
560 X 450
560 X 500
630 X 400
630 X 450
630 X 500
630 X 560
710 X 630
800 X 710
Z1
72
72
72
72
81
81
81
81
86
86
86
86
60
60
60
60
98
98
98
112
112
112
65
72
130
130
75
150
80
150
80
95
95
95
95
95
95
95
100
100
80
80
80
80
80
80
80
80
85
85
85
85
80
80
80
80
45
45
Z2
45
52
61
65
50
58
65
72
57
68
73
81
65
50
55
60
80
82
88
82
88
98
65
60
98
112
65
112
70
130
75
73
80
75
80
75
75
75
80
100
80
80
85
100
80
80
100
80
95
100
80
40
100
75
40
40
110
110
L
155
155
155
150
175
175
170
170
195
195
190
185
151
131
130
127
208
203
202
235
233
227
158
143
267
264
151
314
193
308
170
214
212
197
190
230
225
215
210
218
215
211
205
207
222
218
219
178
250
241
204
150
260
225
166
150
175
180
e1
6.8
6.8
6.8
6.8
8.2
8.2
8.2
8.2
10
10
10
10
11.4
11.4
11.4
11.4
14.6
14.6
14.6
18.2
18.2
18.2
20.5
20.5
22.7
22.7
22.7
28.6
28.6
28.6
28.6
20.9
20.9
20.9
20.9
23.6
23.6
23.6
23.6
23.6
26.5
26.5
26.5
26.5
29.5
29.5
29.5
29.5
33.2
33.2
33.2
33.2
37.4
37.4
37.4
37.4
41.8
47.1
e2
2.9
3.7
4.6
5.8
3.7
4.6
5.8
6.8
4.6
5.8
6.8
8.2
5.8
6.8
8.2
10
8.2
10
11.4
10
11.4
14.6
14.6
18.2
14.6
18.2
20.5
18.2
20.5
22.7
25.5
13.3
14.8
16.5
18.6
13.3
14.8
16.5
18.6
20.9
16.5
18.6
20.9
23.6
18.6
20.9
23.6
26.5
20.9
23.6
26.5
29.5
23.6
26.5
29.5
33.2
37.4
41.8
SDR 11
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SDR 13.6
X
X
X
X
X
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SDR 17
X
X
X
X
X
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
SDR 21
X
X
X
X
X
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
d1e1
d2
e2
Z2Z1
L
* All thickness are based on SDR11. For other thickness, please refer to page 13.
* All unit measurement are base on (mm)
Stub End
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
Tee 90, Equal
11
SIZE (d)
63 X 63 X63
75 X 75 X 75
90 X 90 X90
110 X 110 X 110
125 X 125 X 125
160 X 160 X 160
200 X 200 X 200
225 X 225 X 225
250 X 250 X 250
315 X 315 X 315
L1
115
120
140
155
136
195
230
260
232
260
Z
65
72
81
86
70
98
112
120
130
85
L
230
240
280
310
294
390
462
550
550
520
e
5.9
6.8
8.2
10
11.4
14.6
18.2
20.5
22.7
28.6
SDR 11
√
√
√
√
√
√
√
X
√
√
SDR 17
X
X
X
X
X
X
√
√
√
√
ed
Z
LH
D
SIZE (d)
20
25
32
40
63
75
90
110
125
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
D
45
58
68
78
88
120
120
156
158
188
200
212
250
268
315
320
370
420
470
540
585
630
685
800
910
H
7
9
10
11
14
16
17
18
25
25
25
30
32
32
35
35
35
50
45
45
55
55
55
50
55
Z
41
41
44
49
70
76
80
84
98
102
112
127
115
139
129
155
157
100
100
100
100
100
100
100
170
L
62
64
70
76
95
105
110
115
130
140
150
160
175
180
195
200
210
175
170
172
170
173
181
180
260
e
2.3
2.3
3
3.6
5.8
6.8
9.2
10.5
11.4
12.8
14.6
16.4
18.2
20.5
22.7
25.5
28.6
32.3
SDR 11
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
X
X
X
X
X
X
X
SDR 13.6
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
X
X
X
X
X
X
X
SDR 17
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
SDR 21
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
SDR 26
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
√
√
√
√
√
√
√
e dd
e
Z
L1
L
* All thickness are based on SDR11. For other thickness, please refer to page 13.
* All thickness are based on SDR11. For other thickness, please refer to page 13.
* All unit measurement are base on (mm)
* All unit measurement are base on (mm)
Tee 90, Reducing
12
SIZE (d1 x d2)
75 X 32 X 75
75 X 50 X 75
75 X 63 X 75
90 X 32 X 90
90 X 40 X 90
90 X 50 X 90
90 X 63 X 90
90 X 75 X 90
110 X 32 X 110
110 X 40 X 110
110 X 50 X 110
110 X 63 X 110
110 X 75 X 110
110 X 90 X 110
125 X 75 X 125
125 X 90 X 125
125 X 110 X 125
160 X 63 X 160
160X 75 X 160
160 X 90 X 160
160 X 110 X 160
160 X 125 X 160
200 X 90 X 200
200 X 110 X 200
200 X 125 X 200
200 X 160 X 200
225 X 90 X 225
225 X 110 X 225
225 X 125 X 225
225 X 160 X 225
225 X 200 X 225
250 X 90 X 250
250 X 110 X 250
250 X 125 X 250
250 X 160 X 250
250 X 200 X 250
315 X 110 X 315
315 X 160 X 315
315 X 200 X 315
315 X 225 X 315
315 X 250 X 315
400 X 200 X 400
400 X 225 X 400
400 X 250 X 400
Z2
45
57
65
45
50
57
65
72
45
50
57
65
72
81
71
71
71
64
71
80
83
88
80
83
88
99
71
83
88
99
113
80
83
88
99
113
83
99
113
121
140
113
121
130
L1
95
105
115
105
110
115
125
130
115
120
125
135
140
150
140
147
147
155
162
173
176
182
192
195
201
212
206
221.5
227.5
238.5
256
218
221.5
227
238
254
255
271
286.5
295
314.5
329
337
347
Z1
72
72
72
81
81
81
81
81
86
86
86
86
86
86
72
72
72
75
98
98
98
98
85
112
110
100
85
120
120
120
100
130
130
130
130
130
150
150
140
125
115
150
150
150
L
210
215
228
222
230
240
253
265
240
240
250
260
270
290
245
260
280
320
320
320
320
320
360
360
360
360
450
450
450
450
450
394
412
438
468
550
515
515
515
515
515
550
550
550
e1
6.8
6.8
6.8
8.2
8.2
8.2
8.2
8.2
10
10
10
10
10
10
11.4
11.4
11.4
14.6
14.6
14.6
14.6
14.6
18.2
18.2
18.2
18.2
13.3
13.3
13.3
13.3
13.3
22.7
22.7
22.7
22.7
22.7
28.6
28.6
28.6
28.6
28.6
23.6
23.6
23.6
e2
2.9
4.6
5.8
2.9
3.7
4.6
5.8
6.8
2.9
3.7
4.6
5.8
6.8
8.2
6.8
8.2
10
5.8
6.8
8.2
10
11.4
8.2
10
11.4
14.6
8.2
10
11.4
9.5
11.8
8.2
10
11.4
14.6
18.2
10
14.6
18.2
20.5
22.7
11.8
13.3
14.8
SDR 11
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
X
X
X
SDR 17
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√* All thickness are based on SDR11. For other thickness, please refer to page 13.
Material : PE80
Connection : Butt Welding
Pressure : 1.25 Mpa (Water) 0.8 Mpa (Gas)
Material : PE100
Connection : Butt Welding
Pressure : 1.6 Mpa (Water) 1.0 Mpa (Gas)
e1 d1
d2e2
Z2
Z1
L1
L
* All unit measurement are base on (mm)
FIMAS FABRICATED POLYETHYLENE FITTINGS3
FIMAS Fabricated Fitting features:• Available from sizes of 20mm up to sizes of 1200mm• Customization of fitting according to requirement of client regardless of sizes, angle and shape• Available in either PE80 or PE100 material• Suitable for water, gas & sewer application• Group of well experience engineer welders to fabricate HDPE fitting
With the ever increasing demand for complex and cost efficient design for water, gas & sewer infrastructure system, polyethylene fabricated fittings will play an important role in helping engineers and contractors to unravel in difficult installation situations where common polyethylene fittings fails.
FIMAS Fabricated fittings can come in various sizes, angles and shapes. It is available in either PE80 or PE100 materials. All FIMAS Fabricated fittings are suitable for application such as in water, gas and sewer. We have a group of experience and well train engineer welders that specializes in producing and fabricating polyethylene fittings for the past 10 years and it is with these fundamentals that Resintech will again prove to be the best of its kind in the industries that we are in.
13
THICKNESS FOR SDR 13.6, SDR 17, SDR 21 AND SDR 26SIZE (d)
20
25
32
40
50
63
75
90
110
125
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1000
SDR 13.6
2.6
3.0
3.7
4.7
5.5
6.6
8.1
9.2
10.3
11.8
13.3
14.7
16.6
18.4
20.6
23.2
26.1
29.4
33.1
36.8
41.2
46.3
52.5
58.8
SDR 17
2.4
3.0
3.8
4.5
5.4
6.6
7.4
8.3
9.5
10.7
11.9
13.4
14.8
16.6
18.7
21.2
23.7
26.7
29.7
33.2
37.4
42.1
47.4
53.3
59.3
SDR 21
2.4
3.0
3.6
4.3
5.3
6.0
6.7
7.7
8.6
9.6
10.6
11.9
13.4
15.0
16.9
19.1
21.5
23.9
26.7
30.0
33.9
38.2
42.9
47.7
SDR 26
2.0
2.5
2.9
3.5
4.2
4.8
5.4
6.2
6.9
7.7
8.6
9.6
10.7
12.1
13.6
15.3
17.2
19.1
21.4
24.1
27.2
30.6
34.4
38.2
14
Tee 90 Equal
110
125
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1000
1200
le (mm)
410
430
440
460
480
500
530
750
780
920
960
1000
1050
1200
1260
1330
1410
1500
1700
1800
2000
205
215
220
230
240
250
265
375
390
460
480
500
525
600
630
665
705
750
850
900
1000
150
250
300
350
400
mm (min) d (mm)
l z
45 , 60 & 30 Elbow
d (mm)
110
125
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1000
le (mm)
α
r (1.5 x OD)
(mm)
165
188
210
240
270
300
338
375
420
473
533
600
675
750
840
945
1065
1200
1350
1500
90
315
338
360
390
420
450
488
625
670
773
833
900
975
1100
1190
1295
1415
1550
1750
1900
60
245
258
271
288
305
323
345
466
492
576
608
646
689
783
835
896
965
1043
1179
1266
45
218
228
237
249
262
274
290
412
424
498
520
548
580
665
698
741
792
847
960
1022
30
194
200
206
214
222
230
241
350
362
428
443
461
481
551
575
603
636
672
762
802
150
250
300
350
400
2+-Z mm (min.)
90 Elbow
a
Z
d
d
r
lele
Z
a
Zd
d
r
le
le
Z
Z
Z
ad
le
le
d
r
d
d
le
le
z z
l
90
* All unit measurement are base on (mm)
* All unit measurement are base on (mm)
Resintech Plastic (M) Sdn Bhd (110562-P)
Lot 3 & 5, Jalan Waja 14,
Kawasan Perindustrian Telok Panglima Garang,
42500 Telok Panglima Garang,
Selangor Darul Ehsan, Malaysia.
Tel : 03 3122 2422 / 03 3122 2428
Fax : 03 3122 2411
Email : [email protected]
Website : www.fimasfitting.com www.resintechmalaysia.com
RESINTECH THERMOPLAST
WELDING MACHINE
FIMAS THERMOWELD
FITTING
FIMAS ELECTROFUSION
FITTING
FIMASFABRICATED
FITTING
![Malayan Banking Bhd v Wembley Industries Holdings Bhd (Fair)[1]](https://static.documents.pub/doc/80x56/5535bda85503467c7a8b46de/malayan-banking-bhd-v-wembley-industries-holdings-bhd-fair1.jpg)
