MOHANISH SHAH

302, Om Siddhi Apt, Mobile: +91-8087688667 Katraj-kondhwa Road, Pune (India) E- Mail: monish2244@gmail.com

Resume Summary: Design Engineer and Research Associate with 4 years of experience in the Product Design and Development, manufacturing, quality check, testing and troubleshooting mechanical equipment.

Key Skills

Good Knowledge of Automobile & Design Engineering (CAD Software).

Experience in managing projects from concept to commissioning stage & handling project activities.

Expertise in swiftly ramping up projects & working out various requirements with respect to product planning, quality standards, manpower and other resources, etc.

Coordinating design and analysis activities with the in-house and third party vendor bought outs.

Passionate for automotive and innovative product design.

Team Supervision and Project Management.

Work Experience Organisation1: TATA Technologies, Pune.

Designation: Design Engineer (L1.1).

Work Experience: 2nd July 2012 till 6th July 2013

Project 1: Chrysler LA2014 Project.Responsibilities:-

Chrysler LA2014 is new Challenger Sedan with complete new Interiors. Tata Technologies are working on development of new Instrument Panel and Floor Console.

Study the data (styling surfaces & master sections) received from customer or on-site coordinator. Communicate the feedback of styling surfaces and sections with internal department. Building the B-surfaces in UNIGRAPHICS-NX (CAD software) Study the gap and flushness interface of part in assembly Building the attachment features by considering the assembly requirement.

Main Projects:

Design of Top Cover in Instrument Panel Design of E-shifter substrate, Shifter Bezel, Shifter Cover with Chrome Ring in Floor Console.

Project 2: Tata Motors Nano AutomaticResponsibilities:-

Feasibility study and modification in floor console. Contributed in designing upper floor console in CATIA (CAD software). Building the attachment features by considering the assembly requirement.

Work Experience Organisation2: VIT R&D, Pune.

Designation: Research Associate

Work Experience: Working from 6nd July 2013 till date

Responsibilities:-

Working in R&D Dept on various Projects. Project management and purchasing quality material from companies. Design work includes Product Definition according to customer requirements, Designing product with CAD

software, material selection, Prototype development, testing of prototype with real time simulation and finally optimization (cost, material etc).

On-site Erection, Commissioning, Internal & External Inspection, Project Planning & Scheduling

Project 1: Design of Mandrel for Rocket

Brief: The aim of the project is to determine the feasibility for collapsible and foldable mandrels and explore techniques for expediting rapid production of rocket propellant motors which will avoid or eliminate machining of the propellant. When the hollow portion consists of large undercuts casting the propellant profile is a challenge. A large undercut profile cannot be cast with the help of simple mandrels. To achieve the undercut machining operations are undertaken which are risky and time consuming. An alternate method or device is required which will enable easy removal of the mandrel and will eliminate the process of machining of the propellant.

Responsibilities:

1. To attempt demonstration of working scaled down prototypes of one method for assembling and disassembling rocket motors.

2. To evaluate possibility of dismantling/ removal of the mandrel by simple machines/mechanics from a remote location.

3. Determining, implementing and monitoring production strategies, policies and plans

4. Planning details of production activities in terms of output quality and quantity, cost, time available and labour requirements

5. Controlling the operation of production plant and quality procedures through planning of maintenance, designation of operating hours and supply of parts and tools

6. Monitoring production output and costs, and adjusting processes and resources to minimise costs

7. Informing other Managers about production matters

Name of sponsoring organization: DRDO India

Period of funding: 36 month

Amount of grant: 20 Lakhs

Project 2: Design of Punctured Assistant Apparatus

Brief: To design portable trolley system for punctured two wheeler to assist the users to take the punctured motorcycle to nearby service outlets. This device will be very effective especially in rural & urban area where service outlets are not readily available.

Responsibilities:

1. Design and fabrication of mechanism

2. study of different material

3. optimization of cost

4. Weight Reduction

5. Friction Reduction between wheels and road.

Name of sponsoring organization: RGSTC, Govt of Maharashtra

Period of funding: 18 month

Amount of grant: 18 Lakhs

Project 3: Development of Autonomous robot for separating oil spills

Brief: To develop method of preparation of metal Nano-particles using green chemistry techniques and its Application for Autonomous oil spill Absorbing Robot. This device floats on the water after being set out from a helicopter or boat. It can track the source of the spill and concentrate on cleaning the spill in that area. In the middle of the robot is a compartment full of Nano-particles mesh. As the oil splashes into the compartment, the meshing adsorbs the oil and returns clean ocean water.

Responsibilities:

1. Directing research into production methods, and recommending and implementing initiatives

2. Overseeing the acquisition and installation of new plant and equipment

3. Controlling the preparation of production records and reports

4. Coordinating the implementation of occupational health and safety requirements

5. Directing staff activities and monitoring their performance

Academic Details

Completed M Tech in Mechanical (Design Engineering) from VIT college, Pune secured 9.0cgpa, in June 2015.

Completed BE (Mechanical), from University of Pune in 2012 secured 70%

Completed H.S.C. in June 2008 from MP Board secured 87%.

Completed S.S.C. in June 2006 from MP Board secured 89%.

Technical Expertise (Design Experience: 4 years)

UG (NX7.5) : Modeling(solid, surfacing),

Catia V5 R19 : Modeling(Solid, Surface),

Auto Cad : 2D Drafting, Lay out and Detailing.

Microsoft Office : Word, Excel and Power Point.

ACADEMIC PROJECTS

(Project in M.Tech) = Design & Analysis of Puncture Assistive Device.

Description: The project was about solving the customer problem of pulling two wheeler when they get flat tire. To design required parameters and real time simulation for user satisfaction.

Paper published in IJERT Journal on “ Detection of fault in rolling element bearing using condition monitoring by experimental approach”

Paper published in ICDAMS-2016 conference at Chennai on “Product Design for Punctured Assistant Apparatus”

(Project in B.E.)

Design and Fabrication of machine for Detection of fault in rolling element bearing using condition monitoring by experimental approach. (Sponsored by Pune University, Pune)

CATIA V5 certification course from MIT CAD Design center.

NOTEWORTHY ACHIEVEMENTS

1. Holds the distinction of designing Unique Product “Punctured Assistant Apparatus” for two wheeler with Dr. Kalyana Sundaram (PhD USA)

2. Successfully tested Punctures Assistive Device and received patent for the same.

3. First Rank Holder for M.Tech Design Engineering in Pune University.

4. Awarded Promising scholar based on feedback, research and Administration duties done successfully.

5. Awarded Young research Associate from VIT, Pune.

DECLARATION

I hereby declare that the information furnished above is true to the best of my knowledge. Please give an opportunity to serve

for your esteemed organization. (Mohanish Shah)