+ All Categories
Home > Documents > RETROFIT KIT 25W HE 2X2' TITANIUM LED SERIES 2...TITANIUM LED SERIES 2.0 111144 Easy 3-5 minutes...

RETROFIT KIT 25W HE 2X2' TITANIUM LED SERIES 2...TITANIUM LED SERIES 2.0 111144 Easy 3-5 minutes...

Date post: 21-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
3
111 144 Easy 3-5 minutes installation Universally compatible to upgrade 2x2' troffer and louver Exceptional efficacy 144 LPW 120-277V circuit and 0-10V dimming control compatible High performance lighting distribution and low glare lens Extra long 100,000 hour lifetime WARRANTY YR 10 100,000 H PRO 82 UNIVERSAL WIDE BEAM RETROFIT KIT 25W HE 2X2' BALLAST COMPATIBLE www.greencreative.com / [email protected] - Tel / Fax: (866) 774-5433 - / GREENCREATIVELED / GClightingLED / GREEN CREATIVE EFFICIENCY AT WORK ELECTRONIC TM 21 IES
Transcript
Page 1: RETROFIT KIT 25W HE 2X2' TITANIUM LED SERIES 2...TITANIUM LED SERIES 2.0 111144 Easy 3-5 minutes installation Universally compatible to upgrade 2x2' troffer and louver Exceptional

TITANIUM LED SERIES 2.0

111144Easy 3-5 minutes installationUniversally compatible to upgrade 2x2' troffer and louver Exceptional efficacy 144 LPW120-277V circuit and 0-10V dimming control compatible High performance lighting distribution and low glare lensExtra long 100,000 hour lifetime

WARRANTY

YR

10

100,000 H

PRO

82

UNIVERSAL

WIDE BEAM

RETROFIT KIT 25W HE 2X2'

BALLASTCOMPATIBLE

www.greencreative.com / [email protected] - Tel / Fax: (866) 774-5433 - / GREENCREATIVELED / GClightingLED / GREEN CREATIVE

EFFICIENCY AT WORK

ELECTRONIC

TM 21 IES

Page 2: RETROFIT KIT 25W HE 2X2' TITANIUM LED SERIES 2...TITANIUM LED SERIES 2.0 111144 Easy 3-5 minutes installation Universally compatible to upgrade 2x2' troffer and louver Exceptional

SPECIFICATIONSINSTALLATION GUIDE

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Step 6.

Step 7.

Step 8.

Make sure the POWER IS TURNED OFF at the source to the location at which you are installing the product.Remove existing lamps, door frame (if applicable), reflector and ballast cover. Gently lift the original luminaire housing and slide in both side mounting brackets between the housing and the T-grid. (fig. 1)Hang the retrofit kit body by hooking the T-hinges into the respective slots on one of the mounting brackets. (fig. 2)

Attach the safety cables to the original luminaire housing using the self-tapping hex head screws and washers provided. (fig. 3) Connect the retrofit kit power to the AC power. Connect the power supply to the retrofit kit. (fig. 4) Close the retrofit kit by pushing it up and securing both latches. (fig. 5) Return power back to the source and installation is complete. (fig. 6)

RETROFIT KIT 25W HE 2X2'

1.

4.

2.

5.

3.

6.

RETROFIT KIT INSTALLATION

* Suitable for damp locations. Not for use where directly exposed to the weather or water

Fig. 1 Fig. 5

Fig. 2

Fig. 3

Fig. 4

OFF

ON

OFF

ON

DIRECT INSTALLATION

Switch off power to the luminaire (fig. 1) and remove diffuser (if provided)Remove the existing fluorescent lamp(s) from the luminaire (fig. 2)Note: Verify that the fluorescent tube type is listed on the LED lamp label

Install GREEN CREATIVE T8 LED lamp (one for each fluorescent lamp removed) (fig. 3)Twist the GREEN CREATIVE T8 LED lamp firmly into the lamp holders (fig. 4)Switch on power to the luminaire (fig. 5)

SPECIFICATIONS

Type

Power (W)

Voltage - Frequency

Color Temp. (ANSI)

CRI (Ra)

Typical lumens (lm)

Efficacy (LPW)

Beam Angle

Dimmable

Power Factor

THD

Rated Lifetime - L70 (hrs.)

Rated Lifetime - L90 (hrs.)

L x W x H (w/ brackets)

L x W x H (w/o brackets)

Weight (lb. / g)

Product

Model 28337

25TROFKIT22DIM/830/277V

28338

25TROFKIT22DIM/835/277V

28339

25TROFKIT22DIM/840/277V

2x2' Troffer Retrofit Kit

25

120-277V 50-60Hz

Warm White 3000K

82

3500

140

120°

Yes

0.9

<20%

100,000

44,000

23.90"x23.94"x2.76"(607x608x70mm)

22.51"x20.59"x2.76"(572x523x70mm)

10.58lb. / 4.8kg

2x2' Troffer Retrofit Kit

25

120-277V 50-60Hz

Neutral White 3500K

82

3500

140

120°

Yes

0.9

<20%

100,000

44,000

23.90"x23.94"x2.76"(607x608x70mm)

22.51"x20.59"x2.76"(572x523x70mm)

10.58lb. / 4.8kg

2x2' Troffer Retrofit Kit

25

120-277V 50-60Hz

Cool White 4000K

82

3600

144

120°

Yes

0.9

<20%

100,000

44,000

23.90"x23.94"x2.76"(607x608x70mm)

22.51"x20.59"x2.76"(572x523x70mm)

10.58lb. / 4.8kg

Dimming

Power

Ground

Page 3: RETROFIT KIT 25W HE 2X2' TITANIUM LED SERIES 2...TITANIUM LED SERIES 2.0 111144 Easy 3-5 minutes installation Universally compatible to upgrade 2x2' troffer and louver Exceptional

RETROFIT KIT 25W HE 2X2'

Ref

.:# D

S20

8-TR

OFK

IT-2

5W-2

X2-2

6021

8

PRODUCT ORDERING INFORMATION

ACCESSORY ORDERING INFORMATION

Options (Factory Installation): Select or Leave Blank

Must SelectPower

25TROFKIT22DIM

25W

Model

SENSORRC

Product

97881

Description

Remote Control for OCCDIM

30

3000K

35

3500K

40

4000K

8

82

277V

120-277V

(Blank)

None

STEPDIM

Step Dimming 100/50

(Blank)

None

OCCDIM

Microwave Sensor

(Blank)

None

EM

10W EM Backup

CRI CCT Voltage Step Dimming Sensor EM Backup

Ex. 25TROFKIT22DIM/840/277V/OCCDIM/EM


Recommended