A half mask, such as the 7000 or 7800 Series half masks, may be worn in environments up to 10 times the Permissible Exposure Limit (PEL) set by OSHA. A full face mask, such as the 9000 Series, may also be worn in these environments. If the concentration of the contaminant is greater than 10 times the PEL then a full face mask such as the 9000 Series, quantitatively tested, may be worn for concentrations up to 50 times the PEL. REUSABLE RESPIRATORY 7000/7800 SERIES HALF MASKS 9000 SERIES FULL FACE MASK HALF MASK VS. FULL FACE MASK COMPLIANCE JUST GOT A WHOLE LOT EASIER Moldex designed the 7000/7800 half masks series to be the most user friendly respirators on the market. These streamlined respirators feature fewer parts, minimal maintenance, and a wider field of vision. The award-winning 7000/7800 series add up to simple, comfortable, and economical respiratory protection that’s just plain EASY TO WEAR. 7800 7000 FEATURES • Exclusive over-molded lens offers greater field of vision. • Lighter weight for superior all-day comfort. • Fewer parts means less cost and easy maintenance. • Lens meets ANSI Z87+ for high impact requirements. EASY TO WEAR At less than 13 ounces, the 9000 Series respirator is ultra-lightweight. Workers will appreciate the comfort and longer wearability and employers will benefit from increased user acceptance. ON & OFF MADE EASY A convenient ratchet fastening strap system and the stand-away head harness make donning and doffing the 9000 mask quick and easy. The strap tabs are securely molded directly to the flange for rugged use. LIGHTEST WEIGHT FACEPIECE OF ANY POPULAR MODEL. WEIGHS LESS THAN 13 OUNCES. OVER-MOLDED BUCKLES FOR SECURE STRAP ATTACHMENT. ONE FINGER STRAP RELEASE FEATURES • High-tech, streamlined design for exceptional worker acceptance. • Lighter weight for superior all-day comfort. • Low profile, compact design fits well under welding helmets and with safety glasses. ators ce, and rtable, FEATURES • High-tech, streamlined design for exceptio worker acceptance. • Lighter weight for superior all-day comfort • Low profile, compact design fits well under welding helmets and with safety glasses. OVER- M BUCKLES FO STRAP ATT ONE FI STRAP R 7000/7800 IN DROP DOWN MODE THE VERSATILE 7000/7800 HAVE OPTIONAL DROP DOWN/LOCK DOWN STRAP MODES. 9000 DANGER PEL 50X 10X - FULL FACE - HALF MASK
Transcript
A half mask, such as the 7000 or 7800 Series half masks, may be worn in environments up to 10 times the Permissible Exposure Limit (PEL) set by OSHA. A full face mask, such as the 9000 Series, may also be worn in these environments.
If the concentration of the contaminant is greater than 10 times the PEL then a full face mask such as the 9000 Series, quantitatively tested, may be worn for concentrations up to 50 times the PEL.
REUSABLE RESPIRATORY
7000/7800 SERIES HALF MASKS
9000 SERIES FULL FACE MASK
HALF MASK VS. FULL FACE MASK
COMPLIANCE JUST GOT A WHOLE LOT EASIERMoldex designed the 7000/7800 half masks series to be the most user friendly respirators on the market. These streamlined respirators feature fewer parts, minimal maintenance, and a wider field of vision. The award-winning 7000/7800 series add up to simple, comfortable, and economical respiratory protection that’s just plain EASY TO WEAR.
78007000
FEATURES• Exclusive over-molded lens offers greater field of vision.• Lighter weight for superior all-day comfort.• Fewer parts means less cost and easy maintenance.• Lens meets ANSI Z87+ for high impact requirements.
EASY TO WEARAt less than 13 ounces, the 9000 Series respirator is ultra-lightweight. Workers will appreciate the comfort and longer wearability and employers will benefit from increased user acceptance.
ON & OFF MADE EASYA convenient ratchet fastening strap system and the stand-away head harness make donning and doffing the 9000 mask quick and easy. The strap tabs are securely molded directly to the flange for rugged use.
LIGHTEST WEIGHTFACEPIECE OF ANYPOPULAR MODEL.
WEIGHS LESSTHAN 13 OUNCES.
OVER-MOLDEDBUCKLES FOR SECURESTRAP ATTACHMENT.
ONE FINGERSTRAP RELEASE
FEATURES• High-tech, streamlined design for exceptional worker acceptance.• Lighter weight for superior all-day comfort.• Low profile, compact design fits well under welding helmets and with safety glasses.
ators ce, and rtable,
FEATURES• High-tech, streamlined design for exceptio worker acceptance.• Lighter weight for superior all-day comfort• Low profile, compact design fits well under welding helmets and with safety glasses.
OVER-MBUCKLES FOSTRAP ATT
ONE FISTRAP R
7000/7800 IN DROP DOWN MODE
THE VERSATILE7000/7800
HAVE OPTIONALDROP DOWN/LOCK DOWN
STRAP MODES.
9000
DANGERPEL
50X10X
- FULL FACE- HALF MASK
larrybowdish
SSI logo contact
A fit test checks the seal between the respirator's facepiece and the user's face. Proper fit of respiratory equipment can be tested by either a qualitative or a quantitative test.
KIT INCLUDES EVERYTHING NEEDED TO PERFORMFIT TESTING ON ALL MOLDEX RESPIRATORS• Comply with OSHA standards for qualitative fit test requirements established by OSHA 1910.134.• Includes BITREX® aerosol, fit test hood, instructions and certificates• Easy to follow, step-by-step instructions• Respirators sold separately
BITREX® QUALITATIVE FIT TEST KIT
DIFFERENCE BETWEEN QUALITATIVE AND QUANTITATIVE FIT TESTING
MKT-1081 REV A 12-18
FIT TESTING
PORTACOUNT LOAN PROGRAM AND TRAIN-THE-TRAINERSave Money and Make Annual Fit Testing Easy
LET A MOLDEX REP TRAIN AND CERTIFY INDIVIDUALS AT YOUR COMPANYTO PERFORM FIT TESTING SERVICES WITH OUR TRAIN THE TRAINER PROGRAM.
SAVE THOUSANDS WITH THE MOLDEXPORTACOUNT FIT TESTER LOAN-OUT PROGRAM.
IMPORTANT FIT TEST REQUIREMENTS TO KEEP IN MIND:• Anything that interferes with the seal of the respirator to the face, such as a beard, disqualifies the subject from wearing a tight fitting respirator.• Glasses, goggles or other corrective or protective equipment that will be worn while working must be worn during test.
QUALITATIVE TEST (SUBJECTIVE) Pass/Fail Test Uses reaction, such as taste or smell, to an irritant Moldex offers the Bitrex Qualitative Fit Test
QUANTITATIVE TEST (OBJECTIVE) Most accurate test available Machine measures amount of inward leakage Moldex offers the Portacount Loan Program for quantitative testing
Safety Services, Inc.P.O. Box 3539Kalamazoo, MI 49003-3539
Moldex 7000, 7800 & 9000 RespiratorsMoldex designed the 7000/7800 half mask and 9000 full face series to be the most user friendly respirators on the market. The streamlined 7000/9000 feature fewer parts, minimal maintenance, and a wider field of vision. They are ultra–lightweight, durable, and economical, so maximum comfort with extended use is built-in. The 7000/9000 series add up to simple, comfortable, and economical respiratory protection that’s just plain EASY TO WEAR. 100% PVC-Free®.
Moldex 7000 Half Mask Respirator 4-54004 7001 Small facepiece $11.39 ea4-54005 7002 Medium facepiece $11.39 ea4-54006 7003 Large facepiece $11.39 ea
Moldex 7800 Silicone Half Mask Respirator 4-540030 7801 Small facepiece $26.10 ea4-540031 7802 Medium facepiece $26.10 ea4-540032 7803 Large facepiece $26.10 ea
Moldex 9000 Full Face Respirator 4-54000 9001 Small facepiece $111.37 ea4-54001 9002 Medium facepiece $111.37 ea4-54003 9003 Large facepiece $111.37 ea
