NON-IMPACT DEMOLITION/ RECY-CLING PROCESSORS

Rev # : 2014D

INDEX

1. Model Selection : Right Tool for the Right Job 2. VUC Demolition Multi Processors ( 8 models ) : 2,200 ~ 100,000 lbs carrier3. VUC-A with Field Replaceable Bolt-On Teeth4. VUS Recycling Multi Processors ( 2 models ) : 40,000 ~ 80,000 lbs carrier5. VUC and VUS Model Comparison : Dual Pin versus Single Pin Design6. VSP Secondary Pulverizer (10 models) : 10,000 ~ 100,000 lbs carrier7. VSP-A with Field Replaceable Bolt-on Teeth8. VM : Electromagnet Kit

http://www.vanedequipment.com0

[ Primary processor : VUC, VUS series ]- C Jaw : Demolishing Concrete Columns & Beams- S Jaw : Cutting Down Steel Structures- P Jaw : Sizing Concretes and Separating Rebar

1

[ Secondary Pulverizer : VSP series ]- Demolishing ground level Concrete Structures

- Sizing Concretes and Separating Rebar

[ Steel Shear : VSS series ]- Cutting ground level Steels : H-beam, I-beam, Bar, Pipe- Production Cutting at Recycling Yard

Model Selection : Right Tool for the Right Job

http://www.vanedequipment.com

VUC : Demolition Multi Processors- Dual Cylinders for high power and balanced jaw movement- All models have Speed (Re-gen) Valve and Hydraulic Rotator- Interchangeable Jaws : Crusher, Pulverizer and Shear- Large model selection : 8 models (2,200~100,000 lb carrier)- New A models with field replaceable bolt-on teeth

http://www.vanedequipment.com2

[ VUC-A Model ] [ VUC Standard Model]

http://www.vanedequipment.com3

VUC-A with Field Replaceable Bolt-On Teeth

VUS : Recycling Multi Processors- Dual Cylinders for high power and balanced jaw movement- Single Pin design for optimized performance for steel shear- Interchangeable Jaw system : Shear, Crusher and Pulverizer- Integrated Speed Valve (Re-gen) Manifold in rotator- 2 models are available : 40,000 ~ 80,000 lb carrier

http://www.vanedequipment.com4

VUC and VUS Comparison

http://www.vanedequipment.com5

VUC Dual Pin design for concrete crusher- Perpendicular angle of attack- Wider opening- Higher initial force

VUS Single Pin for steel shear- No slips between two jaw tips- Consistent shearing force to end stroke

VSP : Secondary Pulverizers

- Large model selection : 8 fixed and 2 rotating (10,000 ~ 100,000 lb carrier )- All models have Cylinder mounted Speed (Re-gen) Valve- New A models with field replaceable bolt-on teeth.

http://www.vanedequipment.com6

[ VSP-A model ] [ VSP Standard Model ]

http://www.vanedequipment.com7

VSP-A with Field Replaceable Bolt-On Teeth

VM : Electromagnet Kit

- 24V Battery Powered and 230V Generator Powered- Best suited to Secondary Pulverizers for separating rebar- Custom sizes and mounting options are available

http://www.vanedequipment.com8