DECIMALS ANGLES.XX: .01[0.3] 2 .XXX: .005[0.13].XXXX: .0020[0.051]

TOLERANCES ARE:

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* ** *

DO NOTSCALE FROM

THIS PRINT ((No OF POS / 26) x .840[21.34] + .040[1.02] REF

.320 8.13 REF

.009 REF0.23

@ .0250[0.635]25 EQ SPACES

.1075 2.731

.8400 (TYP)21.336

.083 2.10REF

(No OF POS / 26) x .8400[21.336]) - .2150[5.461]

"A"

"A"

C

C

01

02

C

QFS-XXX-XX.XX-XX-D-XX-XXX-XXNo OF POSITIONS

-026, -052, -078, -104, *-130(PER ROW)

PLATING SPECIFICATION-L: 10µ" SELECTIVE GOLDIN CONTACT AREA, MATTE TIN ON TAIL (SEE TABLE 7) (AVAILABLE ON -04.25 LEAD STYLE ONLY)-H: 30µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL (SEE TABLE 7) (AVAILABLE ON -04.25 LEAD STYLE ONLY)-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (SEE TABLE 7) (AVAILABLE ON -06.25 LEAD STYLE ONLY)-SL: 10µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (SEE TABLE 7) (AVAILABLE ON -06.25 LEAD STYLE ONLY)

OPTION-A: ALIGNMENT PIN-GP: GUIDE HOLE (SEE FIG 2, SHEET 2) (AVAILABLE ON -04.25 LEAD STYLE ONLY)-P: PICK AND PLACE PAD (USE PPP-51, SEE FIG 4, SHEET 2)

-PC4: 4 POWER POS PER END (.062" THICK BOARD) (SEE FIG 3, SHEET 3)-PC8: 8 POWER POS PER END (.062" THICK BOARD) (SEE FIG 3, SHEET 3)-PT4: 4 POWER POS PER END (.093" THICK BOARD) (SEE FIG 3, SHEET 3)-PT8: 8 POWER POS PER END (.093" THICK BOARD) (SEE FIG 3, SHEET 3)-RF1: 1 RF POS PER END (SEE FIG 5, SHEET 4)-RF2: 2 RF POS PER END (SEE FIG 6, SHEET 4)-RT1: 1 RT POS PER END (SEE FIG 7, SHEET 5)

END OPTIONS

* = NOT TOOLED

(-PXX & -RFX NOT AVAILABLE IN COMBINATION WITH -A OR -GP)(END OPTION APPLIES TO BOTH ENDS, COMBINATIONS ARE NOT AVAILABLE)(-PXX & -RFX AVAILABLE IN POS -026, -052, & -078 ONLY)(-RT1 AVAILABLE IN -026, -052, -078, & -104 POS WITH -A OPTION ONLY)(-PXX, -RFX, & -RT1 AVAILABLE ON -04.25 LEAD STYLE ONLY)

LEAD STYLE-04.25 (SEE NOTE 9)-06.25

PACKAGING OPTION-TR: TAPE & REEL PACKAGING(-026 & -052 POS'S AVAILABLE IN -04.25 LEAD STYLE WITH ALL OPTIONS)(-026 THRU -078 AVAILABLE IN -06.25 LEAD STYLE WITH NO END OPTIONS)(-078 AVAILABLE WITH NO END OPTIONS)(-104 & -130 NOT AVAILABLE IN -TR)

REF"N"

.035 REF0.89

.040 REF1.02

.055 1.40REF

((No OF POS / 26) x .840[21.34]) - .030[0.76] REF

.0040 0.102

.320±.006 8.13±0.15.051 REF1.30

.134 3.40(MEASURED CONTACT

TO CONTACT)

(SEE NOTES 5, 6, & 7)"M"

SECTION "A"-"A"SCALE 5 : 1

QFSS-26-XX.XX-D-02-A(SEE TABLE 7)

C-XXX-XX.XX-XX(SEE TABLE 7)

T-1G2X-XX.XX-L(SEE TABLE 7)

C

C

C

C

(SEE NOTE 6)

.004[0.10]

.002[0.05]

SEE TABLE 1

SEE NOTE 4

C

FIG 1QFS-052-04.25-X-D-A SHOWN

ROW SPECIFICATION-D: DOUBLE

SHEET OF

MATERIAL:

.635mm DOUBLE ROW TERMINAL STRIP

BY:QFS-XXX-XX.XX-XX-D-XX-XXX-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

E.L.S. 6/09/2003 51

SHEET SCALE: 2.25:1

INSULATOR: LCP, COLOR: BLACKCONTACTS & GROUND PLANE: PHOS BRONZE

F:\DWG\MISC\MKTG\QFS-XXX-XX.XX-XX-D-XX-XXX-XX-MKT.SLDDRW

NOTES:1. REPRESENTS A CRITICAL DIMENSION.2. MAXIMUM BURR ALLOWANCE: .0015[0.038]3. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB, POWER: .5 LB, RF: .5 LB.4. ALL CONTACTS ON THE -04.25 LEAD STYLE WILL BE SHEARED.5. MAXIMUM VARIANCE OF .002[0.05].6. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAXIMUM HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINAL.8. PARTS TO BE PACKAGED IN TRAYS.9. LEADSTYLE -01 MAY BE SUBSTITUTED IN PART CALLOUT FOR -04.25 FOR EXISTING CUSTOMERS ONLY

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

REVISION AJ

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* ** *

.008 0.20

.002[0.05] MAXBURR

CONTACT DETAILS(SEE NOTE 4)

C-181-04.25-XX

"A" REF(SEE TABLE 2)

"B" REF(SEE TABLE 2)

.140 REF (2 PLCS)3.56

"B"

"B"

QFSS-26-04.25-D-XX-A-GP

.253 6.43REF (2 PLCS)

SECTION "B"-"B"SCALE 1.75 : 1

(SEE NOTE 5)"M"

.067±.004 1.70±0.10

IN-PROCESS 1

.004[0.10]

.002[0.05]

C

SEE TABLE 1

.535 REF13.59PPP-51.275 6.99

REF

REF"P"

("G" - .535)/2±.020

"G" = MEASURED SIZE

FIG 2-GP: GUIDE HOLE OPTION

(QFS-052-04.25-X-D-A-GP SHOWN)(NOT AVAILABLE WITH -PXX OPTIONS)

(AVAILABLE ON -04.25 LEAD STYLE ONLY)

FIG 4-P: PICK & PLACE PAD OPTION

*

* NOT TOOLED

SHEET OF

.635mm DOUBLE ROW TERMINAL STRIP

BY:

QFS-XXX-XX.XX-XX-D-XX-XXX-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

E.L.S. 6/09/2003 52

SHEET SCALE: 2.5:1

REVISION AJ

F:\DWG\MISC\MKTG\QFS-XXX-XX.XX-XX-D-XX-XXX-XX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* ** *

("E" EQ SPACE(S) @ .07874[2.000]) (TYP)

.100 2.54

"F" REF (TYP)

"D" REF

.069 REF1.76

"C"

"C"POWER COMBO OPTIONS

(QFS-052-04.25-X-D-PC4 SHOWN)(SAME AS FIG 1, UNLESS OTHERWISE STATED)(NOT AVAILABLE WITH -A OR -GP OPTION)

(AVAILABLE ON -04.25 LEAD STYLE ONLY, POS -026, -052, -078 ONLY)

FIG 3CL

CL

QFSS-26-04.25-D-XX-PCX(SEE TABLE 3)

01

02

POWER PIN 1

POWER PIN 2

POWER PIN 3

.113 REF2.87

"Q"

.07874±.0050 (TYP)2.000±0.127

"C"

2 MAX SWAY

'F'

SECTION "C"-"C"

C-79-XX-S

C

CC

C "R" REF

.100 2.54

3 MAX SWAY(EITHER DIRECTION)

LC

C

C

'D'

.0190 REF (TYP)0.48

DETAIL 'D'SCALE 8 : 1

DETAIL 'F' SCALE 10 : 1

.005 MAX BURRTHIS DIRECTION ONLY, OTHERWISESEE NOTE 2

SHEET OF

.635mm DOUBLE ROW TERMINAL STRIP

BY:QFS-XXX-XX.XX-XX-D-XX-XXX-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

E.L.S. 6/09/2003 53

SHEET SCALE: 2.5:1

REVISION AJ

F:\DWG\MISC\MKTG\QFS-XXX-XX.XX-XX-D-XX-XXX-XX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* ** *

"H" REF (SEE TABLE 5)

"E"

"E"

01

02

RF01

.100 REF2.54

.085 (TYP)2.16

.028 REF0.70

.020 SQ REF0.50

.231 5.88REF

.140 (TYP)3.56

"J" .003[0.08] (SEE TABLE 5)

SECTION "E"-"E"

SUB-GRF1-J-P-H-ST-TH2

C

C

C

.070 REF1.78

.140 REF (TYP)3.56 C

"H" REF (SEE TABLE 5)

.250±.002 6.35±0.05C

01

02

RF01RF02

"J" .003[0.08] (SEE TABLE 5)C

FIG 5-RF1 OPTION

(QFS-052-04.25-X-D-RF1 SHOWN)(SAME AS FIG 3, UNLESS OTHERWISE STATED)(NOT AVAILABLE WITH -A OR -GP OPTIONS)

(AVAILABLE ON -04.25 LEAD STYLE, POSITIONS -026, -052, & -078 ONLY)

-RF2 OPTION(QFS-052-04.25-X-D-RF2 SHOWN)

(SAME AS FIG 5, UNLESS OTHERWISE STATED)(NOT AVAILABLE WITH -A OR -GP OPTIONS)

(AVAILABLE ON -04.25 LEAD STYLE, POSITIONS -026, -052, & -078 ONLY)

FIG 6

SHEET OF

.635mm DOUBLE ROW TERMINAL STRIP

BY:

QFS-XXX-XX.XX-XX-D-XX-XXX-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

E.L.S. 6/09/2003 54

SHEET SCALE: 2.5:1

REVISION AJ

F:\DWG\MISC\MKTG\QFS-XXX-XX.XX-XX-D-XX-XXX-XX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

"K" REF (SEE TABLE 6)

"F"

"F"

01

02

FIG 7-RT1 OPTION

(QFS-052-04.25-X-D-A-RT1 SHOWN)(SAME AS FIG 3, UNLESS OTHERWISE STATED)

(NOT AVAILABLE WITH -GP OR -RFX OPTIONS)(AVAILABLE ON -04.25 LEAD STYLE, POSITIONS -026, -052, -078, & -104 WITH -A OPTION ONLY)

QFSS-26-04.25-D-02-A-RT1

.100 REF2.54 .062 1.57REF

.082 2.08REF

"L" (SEE TABLE 6)

FLUSH TO .002

2 MAX SWAY(TYP)

SECTION "F"-"F"

T-1R32-10-F-T

C

C .055 REF1.40

SHEET OF

.635mm DOUBLE ROW TERMINAL STRIP

BY:

QFS-XXX-XX.XX-XX-D-XX-XXX-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

E.L.S. 6/09/2003 55

SHEET SCALE: 2.5:1

REVISION AJ

F:\DWG\MISC\MKTG\QFS-XXX-XX.XX-XX-D-XX-XXX-XX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

Sheet1Drawing View3Drawing View4Drawing View5Section View "A"-"A"Drawing View9

Sheet2Drawing View15Drawing View16Drawing View18Section View "B"-"B"Section View D-DDrawing View38Drawing View35Drawing View37

Sheet3Drawing View21Section View "C"-"C"Drawing View23Drawing View24Detail View 'D' (8 : 1)Detail View 'F' (10 : 1)

Sheet4Drawing View39Section View "E"-"E"Drawing View42Drawing View43Drawing View44

Sheet5Drawing View45Section View "F"-"F"Drawing View47Drawing View48